X.org Lockups

[fotisaueb]

Let me inform you for my latest observations

1)SSH HAS NOT relation to the problem

2)When kde crashes I run from an ssh session ps -aux where I see that X :0 uses only a small amount of cpu BUT as time goes by the cpu usage increases. I mean that the cpu usage increases 0,5 % every 3 seconds.(This is what hapenning to my system) It needs about 10 minutes to completly use the 99% of cpu.

3)PLEASE answer this. In my cases I notice that kde crashes only when I interact with it (mouse or keyboard clicks)
That means that NEVER has the kde froze without my interaction. For example watching video or other heavy processes will not freeze kde until I interact with it(a mouse click). Those cases can be when you click an application button ton launch firefox or when you select fastly files on file manager etc.
Some users can reproduce those lockups by pressing Ctrl and many times a mouse button.

What is happening on your system just before the lockup happens.Do you interact with it or a lockup can happen when you are away?

Way to reproduce the problem:On amarok collection options I have more than 50 directories of music when I click them one be one I always have a crash sometimes sooner (5th directory) sometimes later

[Nerdanel]

I also have never had a freeze I have not triggered with a mouse or a keyboard.

- Writing in Konqueror's address bar. (the most common)
- Switching between browser windows, particularly but not necessarily while a page loads.
- Clicking refresh on a complex page, especially(?) combined with scrolling while it loads.
- Scrolling in JuK with the mouse wheel. (happened once, right after desktop change)

I'm not quite sure, but it may be that my freezes are never triggered by just one click. In most cases I have the time to write two letters in the address bar before it freezes, sometimes more.

It may be that I just don't use the kind of programs, like certain OpenGL screensavers, that are reported to cause lockups on their own. Indeed, I had GLX disabled for quite a while...

I don't know about ssh effects as I have nowhere to ssh from.

[jdgill0]

jdgill, if your computer stays up, please post a diff of your two kernel configs. It would really help narrow things down if we see what you changed to get a locking kernel.

I am still up and running after 24 hours ... I add that I have not been able to run that long over the past two weeks or so -- all of which were under the 2.6.11 kernel.

Here is my diff, not sure how useful it is though

Code: Select all

< # Linux kernel version: 2.6.10-gentoo-r7
< # Sun May  1 21:18:30 2005
---
> # Linux kernel version: 2.6.11-gentoo-r6
> # Sun May  1 21:21:48 2005
96a97
> CONFIG_GENERIC_CALIBRATE_DELAY=y
107a109
> # CONFIG_PREEMPT_BKL is not set
164a167
> # CONFIG_ACPI_CONTAINER is not set
186a190
> # CONFIG_PCIEPORTBUS is not set
266a271
> # CONFIG_BLK_DEV_COW_COMMON is not set
288a294
> # CONFIG_ATA_OVER_ETH is not set
382a389
> # CONFIG_SCSI_ISCSI_ATTRS is not set
431d437
< # CONFIG_SCSI_QLA6322 is not set
573d578
< # CONFIG_IP_NF_NAT_LOCAL is not set
671a677
> # CONFIG_SKGE is not set
680a687
> # CONFIG_2BUFF_MODE is not set
742a750
> CONFIG_SERIO_LIBPS2=y
771d778
< CONFIG_INOTIFY=y
899a907
> # CONFIG_SENSORS_SMSC47B397 is not set
1096d1103
< # CONFIG_USB_HPUSBSCSI is not set
1164a1172
> # CONFIG_USB_SERIAL_GARMIN is not set
1185a1194
> # CONFIG_USB_SERIAL_TI is not set
1196d1204
< # CONFIG_USB_TIGL is not set
1204a1213
> # CONFIG_USB_IDMOUSE is not set
1221a1231,1235
> # InfiniBand support
> #
> # CONFIG_INFINIBAND is not set
>
> #
1242a1257,1260
>
> #
> # XFS support
> #
1245a1264
> CONFIG_INOTIFY=y
1389a1409,1410
> CONFIG_DEBUG_PREEMPT=y
> CONFIG_DEBUG_BUGVERBOSE=y
1428a1450,1454
> # Hardware crypto devices
> #
> # CONFIG_CRYPTO_DEV_PADLOCK is not set
>
> #

I did not realize I had DEBUG settings activated in my 2.6.11 kernel, otherwise I don't think any of the other differences means anything -- most are not set lines. Anyways, I am not a kernel hacker. Maybe this will mean more to someone else, or the fact that 2.6.10-r7 seems to be running OK for me -- although 24 hours is not a definite sign, but it is a good one.

[fotisaueb]

News from the battlefield

http://ubuntuforums.org/archive/index.php/t-26385.html
http://www.dslreports.com/forum/remark,13077822

Also redhat has published a patch that disables the RendAccel option that means no 3d accelation at all.

More about the subject

http://www.nvnews.net/vbulletin/printth ... e=16&pp=15

A by the way a lot of users found a solution by setting AGP from 4x to 2x
Via chipsets are known to have problems with AGP 4x disable AGP 4x from bios

[jdgill0]

Well, I have been running 34 hours now without an xorg lockup/crash/etc. There hasn't been the slightest indication of one going to happen either.

It seems switching back to 2.6.10-gentoo-r7 "fixed" my problem. I looked over the links posted by fotisaueb, and it seems they all suggest turning this or that off, or using a non-nvidia driver (the proprietary version) ... but if a 2.6.10 kernel would make your xorg stable, it seems downgrading the kernel would be the better solution to me.

[MalachiX]

A by the way a lot of users found a solution by setting AGP from 4x to 2x
Via chipsets are known to have problems with AGP 4x disable AGP 4x from bios

If you are using an Nvidia card with the Nvidia driver 4x is automatically disabled. The driver only uses 2x on Via chipsets anyway. So users don't have to switch from 4x to 2x on the Nvidia cards.

Also, I am on a PCI Geforce FX 5200 with AGP turned off in the xorg.conf. Now if it is an AGP probem why do I have a problem on a PCI card?....

[ikaro]

A by the way a lot of users found a solution by setting AGP from 4x to 2x
Via chipsets are known to have problems with AGP 4x disable AGP 4x from bios

If you are using an Nvidia card with the Nvidia driver 4x is automatically disabled. The driver only uses 2x on Via chipsets anyway. So users don't have to switch from 4x to 2x on the Nvidia cards.

Also, I am on a PCI Geforce FX 5200 with AGP turned off in the xorg.conf. Now if it is an AGP probem why do I have a problem on a PCI card?....

you mean PCI-X or something ?
My guess is that, even though the bus is called PCI, the way to access it uses the same code as agp does.

[Epyon]

A by the way a lot of users found a solution by setting AGP from 4x to 2x
Via chipsets are known to have problems with AGP 4x disable AGP 4x from bios

If you are using an Nvidia card with the Nvidia driver 4x is automatically disabled. The driver only uses 2x on Via chipsets anyway. So users don't have to switch from 4x to 2x on the Nvidia cards.

I'm using agp 4x on a VIA chipset...

[Nerdanel]

I went through jdgill0's diff and compared it to my two known-freezing configs for 2.6.10-r4 and 2.6.11-r4. I found nothing that was shared by my two kernels and jdgill0's second but not the first. So if jdgill0's system stays up I think we'll have to dig deeper than configs.

[MalachiX]

I'm using agp 4x on a VIA chipset...

From the Nvidia readme file:

"On Athlon motherboards with the VIA KX133 or 694X chip set, such as the
ASUS K7V motherboard, NVIDIA drivers default to AGP 2x mode to work around
insufficient drive strength on one of the signals. You can force AGP 4x
by setting NVreg_EnableVia4x to 1. Note that this may cause the system
to become unstable."

I'm sorry, after I re-read the file I noticed it didn't say all Via chipsets were set to 2x by default. Only some were.

[jdgill0]

I went through jdgill0's diff and compared it to my two known-freezing configs for 2.6.10-r4 and 2.6.11-r4. I found nothing that was shared by my two kernels and jdgill0's second but not the first. So if jdgill0's system stays up I think we'll have to dig deeper than configs.

My system is now up for 48 hours straight. I am convinced my system is now stable again. If there's any information I can give just let me know. All that time before when I had thought my KDE went crazy, it was really something happening between xorg and my 2.6.11-gentoo-r5/6.

Also, I point out -- the ONLY thing I have done to my system is change from 2.6.11-gentoo-r6 to 2.6.10-gentoo-r7.

[Nerdanel]

In that case I'd like to know everything. Your hardware, full kernel config, and xorg.conf come to mind, as well as any special options in BIOS or elsewhere. I'd like to duplicate your situation as far as possible.

But first I think I'll try your specific kernel release to see if that's the solution. Here are snippets from the changelog. Perhaps something in one of those three releases fixed the problem but for some reason didn't get into 2.6.11.

05 Feb 2005; Daniel Drake -gentoo-sources-2.6.10-r1.ebuild,
-gentoo-sources-2.6.10-r2.ebuild, gentoo-sources-2.6.10-r6.ebuild,
+gentoo-sources-2.6.10-r7.ebuild:
New fbsplash version. Fixes for cd/dvd writing, amd64 device suspend, UML
stack corruption, seagate sata_sil blacklist, aacraid, gdth, ALSA VX driver
memory corruption, clock running too fast during ACPI sleep. Added patch for
configurable root mount delay. Removed bt8xx patch as it doesn't work.
[...]
19 Jan 2005; Daniel Drake +gentoo-sources-2.6.10-r6.ebuild:
Add SCSI/RAID corruption fix, NFS super-io security fix, NFSACL sunrpc
security fix.
[...]
16 Jan 2005; John Mylchreest
+gentoo-sources-2.6.10-r5.ebuild:
Vesafb-tng and fbsplash updates which should fix a number of bugs. Also: Sidewinder
debug message fix, new smbfs DoS fix (solves bug 72968), vmscan writeback (OOM)
fix, ACPI video slab corruption fix, iptables ECN corruption fix. Security: new rlimit
memlock fix, SMP stack resize fix, uselib fix update. Hardware support: Readd support
for cx24110 DVB, and add storage drivers for: Promise PATA PDC2027x, Promise PATA
PDC2037x, ULi5281 SATA, VIA VT6421 SATA, ATI IXP300/IXP400 SATA.

ACPI video slab corruption fix?

I hope you are really stable now. I suspected I had corrected the problem more than once and it was not so.

[trappix]

now that is odd, i did the same switch with no luck .. ive tried 2.6.10-r6(and r7) and neither have alleviated any degree of the problem, the hangs are still easily produceable and occur every time i start kde, my workaround right now is simply to use fluxbox.. somehow i have the gut feeling this is related to the new Xorg extensions, like the transparancy/fancy gui effects module, i didnt have any issues whatsoever until i started fiddling with that stuff.. can anyone with these crashes tell me about composite extension on their own setups?

[Nerdanel]

There are reproduceable hangs and random hangs. I and jdgill0 are having/had the latter form. It is unknown how much the problems have to do with each other.

[Gergan Penkov]

jdgill0 have you compiled inotify in the good configuration or it is in the bad one? Probably this is the only option which makes some sense in the diff.

[jdgill0]

jdgill0 have you compiled inotify in the good configuration or it is in the bad one? Probably this is the only option which makes some sense in the diff.

I have

Code: Select all

CONFIG_INOTIFY=y

I actually have this in both the 2.6.10 and 2.6.11 kernels. In fact, I carried over the .config from 2.6.10 to 2.6.11.

[jdgill0]

Nerdanel,

You asked for some info like hardware list, .config, xorg.conf ... here is what I have .. if you need more let me know.

My hardware list -- don't think I missed anything:
-----------------------------------------------
SOYO SY-K7VTA Pro V1.0 motherboard ... I have done nothing to the bios -- it's in default config.
Athlon XP 1800+ cpu
768M of PC100/133 Ram.
Sound Blaster Live! sound card ... 3-4 yrs old, can't remember the exact model
Radeon 9000 Pro 128meg video card
Two ethernet cards running Tulip driver
5 hard drives -- all Western Digital
A generic cdrom
An I/O magic DVD burner

Here is my xorg.conf

Code: Select all

# **********************************************************************
# DRI Section
# **********************************************************************
Section "dri"
    Mode 0666
EndSection

Section "Module"
    Load        "dbe"   # Double buffer extension

    SubSection  "extmod"
      Option    "omit xfree86-dga"   # don't initialise the DGA extension
    EndSubSection

    Load        "type1"
    Load        "freetype"
    Load        "glx"   # libglx.a
    Load        "dri"   # libdri.a
EndSection

Section "Files"
    RgbPath     "/usr/X11R6/lib/X11/rgb"
    FontPath   "/usr/X11R6/lib/X11/fonts/local/"
    FontPath   "/usr/X11R6/lib/X11/fonts/misc/"
    FontPath   "/usr/X11R6/lib/X11/fonts/75dpi/:unscaled"
    FontPath   "/usr/X11R6/lib/X11/fonts/100dpi/:unscaled"
    FontPath   "/usr/X11R6/lib/X11/fonts/Type1/"
    FontPath   "/usr/X11R6/lib/X11/fonts/Speedo/"
    FontPath   "/usr/X11R6/lib/X11/fonts/75dpi/"
    FontPath   "/usr/X11R6/lib/X11/fonts/100dpi/"
EndSection

Section "InputDevice"
    Identifier  "Keyboard1"
    Driver      "kbd"
#    Option "Protocol"   "Xqueue"
    Option "AutoRepeat" "500 30"
#    Option "Xleds"      "1 2 3"
#    Option "LeftAlt"    "Meta"
#    Option "RightAlt"   "ModeShift"
#    Option "XkbModel"   "pc102"
#    Option "XkbModel"   "microsoft"
#    Option "XkbLayout"  "de"
#    Option "XkbLayout"  "de"
#    Option "XkbVariant" "nodeadkeys"
#    Option "XkbOptions" "ctrl:swapcaps"
#    Option "XkbRules"   "xfree86"
#    Option "XkbModel"   "pc101"
#    Option "XkbLayout"  "us"
#    Option "XkbVariant" ""
#    Option "XkbOptions" ""
#    Option "XkbDisable"

    Option "XkbRules"   "xfree86"
    Option "XkbModel"   "pc104"
    Option "XkbLayout"  "us"

EndSection


Section "InputDevice"

    Identifier  "Mouse1"
    Driver "mouse"
    Option "Protocol"   "ImPS/2"
    Option "ZAxisMapping"   "4 5"
    Option "Device"     "/dev/psaux"
#    Option "BaudRate"   "9600"
#    Option "SampleRate" "150"
#    Option "Emulate3Buttons"
#    Option "Emulate3Timeout"    "50"
#    Option "ChordMiddle"
EndSection

Section "Monitor"
    Identifier  "Monitor0"
    HorizSync   31-96
    VertRefresh 55-160
    Option "DPMS"
    DisplaySize  356 267    # mm
EndSection

Section "Device"
    Identifier                          "ATI Graphics Adapter"
    Driver                              "fglrx"
    #Option                              "NoDDC"
    Option "no_accel"                   "no"
    Option "no_dri"                     "no"
    Option "mtrr"                       "off" # disable DRI mtrr mapper, driver has its own code for mtrr
# ### FireGL DDX driver module specific settings ###
# === Screen Management ===
    Option "DesktopSetup"               "0x00000000"
    Option "MonitorLayout"              "AUTO, AUTO"
    Option "IgnoreEDID"                 "off"
    Option "HSync2"                     "unspecified"
    Option "VRefresh2"                  "unspecified"
    Option "ScreenOverlap"              "0"
# === TV-out Management ===
    Option "NoTV"                       "yes"
    Option "TVStandard"                 "NTSC-M"
    Option "TVHSizeAdj"                 "0"
    Option "TVVSizeAdj"                 "0"
    Option "TVHPosAdj"                  "0"
    Option "TVVPosAdj"                  "0"
    Option "TVHStartAdj"                "0"
    Option "TVColorAdj"                 "0"
    Option "GammaCorrectionI"           "0x00000000"
    Option "GammaCorrectionII"          "0x00000000"
# === OpenGL specific profiles/settings ===
    Option "Capabilities"               "0x00000000"
# === Video Overlay for the Xv extension ===
    Option "VideoOverlay"               "on"
# === OpenGL Overlay ===
# Note: When OpenGL Overlay is enabled, Video Overlay
#       will be disabled automatically
    Option "OpenGLOverlay"              "off"
# === Center Mode (Laptops only) ===
    Option "CenterMode"                 "off"
# === Pseudo Color Visuals (8-bit visuals) ===
    Option "PseudoColorVisuals"         "off"
# === QBS Management ===
    Option "Stereo"                     "off"
    Option "StereoSyncEnable"           "1"
# === FSAA Management ===
    Option "FSAAEnable"                 "no"
    Option "FSAAScale"                  "1"
    Option "FSAADisableGamma"           "no"
    Option "FSAACustomizeMSPos"         "no"
    Option "FSAAMSPosX0"                "0.000000"
    Option "FSAAMSPosY0"                "0.000000"
    Option "FSAAMSPosX1"                "0.000000"
    Option "FSAAMSPosY1"                "0.000000"
    Option "FSAAMSPosX2"                "0.000000"
    Option "FSAAMSPosY2"                "0.000000"
    Option "FSAAMSPosX3"                "0.000000"
    Option "FSAAMSPosY3"                "0.000000"
    Option "FSAAMSPosX4"                "0.000000"
    Option "FSAAMSPosY4"                "0.000000"
    Option "FSAAMSPosX5"                "0.000000"
    Option "FSAAMSPosY5"                "0.000000"
# === Misc Options ===
    Option "UseFastTLS"                 "0"
    Option "BlockSignalsOnLock"         "on"
    Option "UseInternalAGPGART"         "no"
    Option "ForceGenericCPU"            "no"
    BusID "PCI:1:0:0"    # vendor=1002, device=496e
    Screen 0
EndSection

Section "Screen"
    Identifier  "Screen0"
    Device      "ATI Graphics Adapter"
    Monitor     "Monitor0"
    DefaultDepth 24
    #Option "backingstore"

    Subsection "Display"
        Depth       24
        Modes       "1280x1024"
        ViewPort    0 0  # initial origin if mode is smaller than desktop
#        Virtual     1280 1024
    EndSubsection
EndSection

Section "ServerLayout"
    Identifier  "Server Layout"
    Screen "Screen0"
    InputDevice "Mouse1" "CorePointer"
    InputDevice "Keyboard1" "CoreKeyboard"
EndSection

#Section "Extensions"
#    Option "Composite" "Enable"
#    Option "RENDER"    "enable"
#EndSection

### EOF ###

Here is my full kernel .config -- for brevities sake I removed all lines that had is not set -- this reduced the number of lines from 1438 to 760. For completeness, I used the following to generate the list

Code: Select all

cat .config | sed -e 's/^.*is not set$//g' | sed -e '/^$/d'

Code: Select all

#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.10-gentoo-r7
# Sun May  1 21:18:30 2005
#
CONFIG_X86=y
CONFIG_MMU=y
CONFIG_UID16=y
CONFIG_GENERIC_ISA_DMA=y
CONFIG_GENERIC_IOMAP=y
#
# Code maturity level options
#
CONFIG_EXPERIMENTAL=y
CONFIG_CLEAN_COMPILE=y
CONFIG_BROKEN_ON_SMP=y
CONFIG_LOCK_KERNEL=y
#
# General setup
#
CONFIG_LOCALVERSION=""
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_POSIX_MQUEUE=y
CONFIG_SYSCTL=y
CONFIG_AUDIT=y
CONFIG_AUDITSYSCALL=y
CONFIG_LOG_BUF_SHIFT=14
CONFIG_HOTPLUG=y
CONFIG_KOBJECT_UEVENT=y
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_KALLSYMS=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_SHMEM=y
CONFIG_CC_ALIGN_FUNCTIONS=0
CONFIG_CC_ALIGN_LABELS=0
CONFIG_CC_ALIGN_LOOPS=0
CONFIG_CC_ALIGN_JUMPS=0
#
# Loadable module support
#
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
CONFIG_OBSOLETE_MODPARM=y
CONFIG_KMOD=y
#
# Processor type and features
#
CONFIG_X86_PC=y
CONFIG_MK7=y
CONFIG_X86_CMPXCHG=y
CONFIG_X86_XADD=y
CONFIG_X86_L1_CACHE_SHIFT=6
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_X86_WP_WORKS_OK=y
CONFIG_X86_INVLPG=y
CONFIG_X86_BSWAP=y
CONFIG_X86_POPAD_OK=y
CONFIG_X86_GOOD_APIC=y
CONFIG_X86_INTEL_USERCOPY=y
CONFIG_X86_USE_PPRO_CHECKSUM=y
CONFIG_X86_USE_3DNOW=y
CONFIG_PREEMPT=y
CONFIG_X86_TSC=y
CONFIG_X86_MCE=y
CONFIG_X86_MCE_NONFATAL=y
#
# Firmware Drivers
#
CONFIG_NOHIGHMEM=y
CONFIG_MTRR=y
CONFIG_HAVE_DEC_LOCK=y
#
# Power management options (ACPI, APM)
#
CONFIG_PM=y
CONFIG_SOFTWARE_SUSPEND=y
CONFIG_PM_STD_PARTITION=""
#
# ACPI (Advanced Configuration and Power Interface) Support
#
CONFIG_ACPI=y
CONFIG_ACPI_BOOT=y
CONFIG_ACPI_INTERPRETER=y
CONFIG_ACPI_SLEEP=y
CONFIG_ACPI_SLEEP_PROC_FS=y
CONFIG_ACPI_AC=m
CONFIG_ACPI_BATTERY=m
CONFIG_ACPI_BUTTON=m
CONFIG_ACPI_VIDEO=m
CONFIG_ACPI_FAN=m
CONFIG_ACPI_PROCESSOR=m
CONFIG_ACPI_THERMAL=m
CONFIG_ACPI_IBM=m
CONFIG_ACPI_BLACKLIST_YEAR=0
CONFIG_ACPI_BUS=y
CONFIG_ACPI_EC=y
CONFIG_ACPI_POWER=y
CONFIG_ACPI_PCI=y
CONFIG_ACPI_SYSTEM=y
#
# APM (Advanced Power Management) BIOS Support
#
#
# CPU Frequency scaling
#
#
# Bus options (PCI, PCMCIA, EISA, MCA, ISA)
#
CONFIG_PCI=y
CONFIG_PCI_GOANY=y
CONFIG_PCI_BIOS=y
CONFIG_PCI_DIRECT=y
CONFIG_PCI_MMCONFIG=y
CONFIG_PCI_LEGACY_PROC=y
CONFIG_PCI_NAMES=y
CONFIG_ISA=y
#
# PCCARD (PCMCIA/CardBus) support
#
#
# PC-card bridges
#
CONFIG_PCMCIA_PROBE=y
#
# PCI Hotplug Support
#
#
# Executable file formats
#
CONFIG_BINFMT_ELF=y
CONFIG_BINFMT_AOUT=y
CONFIG_BINFMT_MISC=y
#
# Device Drivers
#
#
# Generic Driver Options
#
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=m
#
# Memory Technology Devices (MTD)
#
#
# Parallel port support
#
CONFIG_PARPORT=y
CONFIG_PARPORT_PC=y
CONFIG_PARPORT_PC_CML1=y
#
# Plug and Play support
#
CONFIG_PNP=y
#
# Protocols
#
CONFIG_PNPACPI=y
#
# Block devices
#
CONFIG_BLK_DEV_FD=y
CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=256000
CONFIG_INITRAMFS_SOURCE=""
CONFIG_LBD=y
CONFIG_CDROM_PKTCDVD=y
CONFIG_CDROM_PKTCDVD_BUFFERS=8
#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
#
# ATA/ATAPI/MFM/RLL support
#
CONFIG_IDE=y
CONFIG_BLK_DEV_IDE=y
#
# Please see Documentation/ide.txt for help/info on IDE drives
#
CONFIG_BLK_DEV_IDEDISK=y
CONFIG_IDEDISK_MULTI_MODE=y
CONFIG_BLK_DEV_IDECD=y
CONFIG_BLK_DEV_IDESCSI=m
#
# IDE chipset support/bugfixes
#
CONFIG_IDE_GENERIC=y
CONFIG_BLK_DEV_IDEPCI=y
CONFIG_IDEPCI_SHARE_IRQ=y
CONFIG_BLK_DEV_OFFBOARD=y
CONFIG_BLK_DEV_GENERIC=y
CONFIG_BLK_DEV_IDEDMA_PCI=y
CONFIG_IDEDMA_PCI_AUTO=y
CONFIG_BLK_DEV_PDC202XX_NEW=y
CONFIG_BLK_DEV_VIA82CXXX=y
CONFIG_BLK_DEV_IDEDMA=y
CONFIG_IDEDMA_AUTO=y
#
# SCSI device support
#
CONFIG_SCSI=m
CONFIG_SCSI_PROC_FS=y
#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SR=m
CONFIG_CHR_DEV_SG=m
#
# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
#
#
# SCSI Transport Attributes
#
#
# SCSI low-level drivers
#
CONFIG_SCSI_QLA2XXX=m
#
# Old CD-ROM drivers (not SCSI, not IDE)
#
#
# Multi-device support (RAID and LVM)
#
#
# Fusion MPT device support
#
#
# IEEE 1394 (FireWire) support
#
CONFIG_IEEE1394=y
#
# Subsystem Options
#
#
# Device Drivers
#
CONFIG_IEEE1394_OHCI1394=y
#
# Protocol Drivers
#
CONFIG_IEEE1394_RAWIO=y
#
# I2O device support
#
#
# Networking support
#
CONFIG_NET=y
#
# Networking options
#
CONFIG_PACKET=y
CONFIG_UNIX=y
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
CONFIG_IP_TCPDIAG=y
#
# IP: Virtual Server Configuration
#
CONFIG_NETFILTER=y
#
# IP: Netfilter Configuration
#
CONFIG_IP_NF_CONNTRACK=y
CONFIG_IP_NF_QUEUE=y
CONFIG_IP_NF_IPTABLES=y
CONFIG_IP_NF_MATCH_LIMIT=y
CONFIG_IP_NF_MATCH_IPRANGE=y
CONFIG_IP_NF_MATCH_MAC=y
CONFIG_IP_NF_MATCH_PKTTYPE=y
CONFIG_IP_NF_MATCH_MARK=y
CONFIG_IP_NF_MATCH_MULTIPORT=y
CONFIG_IP_NF_MATCH_TOS=y
CONFIG_IP_NF_MATCH_RECENT=y
CONFIG_IP_NF_MATCH_ECN=y
CONFIG_IP_NF_MATCH_DSCP=y
CONFIG_IP_NF_MATCH_AH_ESP=y
CONFIG_IP_NF_MATCH_LENGTH=y
CONFIG_IP_NF_MATCH_TTL=y
CONFIG_IP_NF_MATCH_TCPMSS=y
CONFIG_IP_NF_MATCH_HELPER=y
CONFIG_IP_NF_MATCH_STATE=y
CONFIG_IP_NF_MATCH_CONNTRACK=y
CONFIG_IP_NF_MATCH_OWNER=y
CONFIG_IP_NF_FILTER=y
CONFIG_IP_NF_TARGET_REJECT=y
CONFIG_IP_NF_TARGET_LOG=y
CONFIG_IP_NF_TARGET_ULOG=y
CONFIG_IP_NF_TARGET_TCPMSS=y
CONFIG_IP_NF_NAT=y
CONFIG_IP_NF_NAT_NEEDED=y
CONFIG_IP_NF_TARGET_MASQUERADE=y
CONFIG_IP_NF_TARGET_REDIRECT=y
CONFIG_IP_NF_TARGET_NETMAP=y
CONFIG_IP_NF_TARGET_SAME=y
CONFIG_IP_NF_MANGLE=y
CONFIG_IP_NF_TARGET_TOS=y
CONFIG_IP_NF_TARGET_ECN=y
CONFIG_IP_NF_TARGET_DSCP=y
CONFIG_IP_NF_TARGET_MARK=y
CONFIG_IP_NF_TARGET_CLASSIFY=y
CONFIG_IP_NF_RAW=m
CONFIG_IP_NF_TARGET_NOTRACK=m
CONFIG_IP_NF_ARPTABLES=y
CONFIG_IP_NF_ARPFILTER=y
CONFIG_IP_NF_ARP_MANGLE=y
#
# SCTP Configuration (EXPERIMENTAL)
#
#
# QoS and/or fair queueing
#
#
# Network testing
#
CONFIG_NETDEVICES=y
CONFIG_DUMMY=m
#
# ARCnet devices
#
#
# Ethernet (10 or 100Mbit)
#
CONFIG_NET_ETHERNET=y
CONFIG_MII=y
#
# Tulip family network device support
#
CONFIG_NET_TULIP=y
CONFIG_TULIP=y
#
# Ethernet (1000 Mbit)
#
#
# Ethernet (10000 Mbit)
#
CONFIG_S2IO=m
#
# Token Ring devices
#
#
# Wireless LAN (non-hamradio)
#
#
# Wan interfaces
#
#
# ISDN subsystem
#
#
# Telephony Support
#
#
# Input device support
#
CONFIG_INPUT=y
#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
CONFIG_INPUT_MOUSEDEV_PSAUX=y
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
#
# Input I/O drivers
#
CONFIG_SOUND_GAMEPORT=y
CONFIG_SERIO=y
CONFIG_SERIO_I8042=y
#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
CONFIG_KEYBOARD_ATKBD=y
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=y
#
# Character devices
#
CONFIG_VT=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
CONFIG_INOTIFY=y
#
# Serial drivers
#
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_NR_UARTS=4
#
# Non-8250 serial port support
#
CONFIG_SERIAL_CORE=y
CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
CONFIG_PRINTER=y
#
# IPMI
#
#
# Watchdog Cards
#
CONFIG_RTC=m
#
# Ftape, the floppy tape device driver
#
CONFIG_AGP=y
CONFIG_AGP_VIA=y
#
# I2C support
#
CONFIG_I2C=y
CONFIG_I2C_CHARDEV=m
#
# I2C Algorithms
#
CONFIG_I2C_ALGOBIT=y
CONFIG_I2C_ALGOPCF=m
#
# I2C Hardware Bus support
#
CONFIG_I2C_ISA=m
CONFIG_I2C_VIA=m
CONFIG_I2C_VIAPRO=m
#
# Hardware Sensors Chip support
#
CONFIG_I2C_SENSOR=m
CONFIG_SENSORS_VIA686A=m
#
# Other I2C Chip support
#
#
# Dallas's 1-wire bus
#
#
# Misc devices
#
#
# Multimedia devices
#
CONFIG_VIDEO_DEV=m
#
# Video For Linux
#
#
# Video Adapters
#
#
# Radio Adapters
#
#
# Digital Video Broadcasting Devices
#
#
# Graphics support
#
#
# Console display driver support
#
CONFIG_VGA_CONSOLE=y
CONFIG_DUMMY_CONSOLE=y
#
# Speakup console speech
#
CONFIG_SPEAKUP_DEFAULT="none"
#
# Sound
#
CONFIG_SOUND=y
#
# Advanced Linux Sound Architecture
#
#
# Open Sound System
#
#
# USB support
#
CONFIG_USB=m
#
# Miscellaneous USB options
#
CONFIG_USB_DEVICEFS=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
#
# USB Host Controller Drivers
#
CONFIG_USB_EHCI_HCD=m
CONFIG_USB_EHCI_SPLIT_ISO=y
CONFIG_USB_EHCI_ROOT_HUB_TT=y
CONFIG_USB_OHCI_HCD=m
CONFIG_USB_UHCI_HCD=m
#
# USB Device Class drivers
#
CONFIG_USB_AUDIO=m
CONFIG_USB_BLUETOOTH_TTY=m
CONFIG_USB_MIDI=m
CONFIG_USB_ACM=m
CONFIG_USB_PRINTER=m
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information
#
CONFIG_USB_STORAGE=m
CONFIG_USB_STORAGE_RW_DETECT=y
CONFIG_USB_STORAGE_DATAFAB=y
CONFIG_USB_STORAGE_FREECOM=y
CONFIG_USB_STORAGE_ISD200=y
CONFIG_USB_STORAGE_DPCM=y
CONFIG_USB_STORAGE_HP8200e=y
CONFIG_USB_STORAGE_SDDR09=y
CONFIG_USB_STORAGE_SDDR55=y
CONFIG_USB_STORAGE_JUMPSHOT=y
#
# USB Input Devices
#
CONFIG_USB_HID=m
CONFIG_USB_HIDINPUT=y
CONFIG_HID_FF=y
CONFIG_HID_PID=y
CONFIG_LOGITECH_FF=y
CONFIG_THRUSTMASTER_FF=y
CONFIG_USB_HIDDEV=y
#
# USB HID Boot Protocol drivers
#
CONFIG_USB_AIPTEK=m
CONFIG_USB_WACOM=m
CONFIG_USB_KBTAB=m
CONFIG_USB_POWERMATE=m
CONFIG_USB_MTOUCH=m
CONFIG_USB_EGALAX=m
CONFIG_USB_XPAD=m
CONFIG_USB_ATI_REMOTE=m
#
# USB Imaging devices
#
CONFIG_USB_MDC800=m
CONFIG_USB_MICROTEK=m
#
# USB Multimedia devices
#
CONFIG_USB_DABUSB=m
CONFIG_USB_VICAM=m
CONFIG_USB_DSBR=m
CONFIG_USB_IBMCAM=m
CONFIG_USB_KONICAWC=m
CONFIG_USB_OV511=m
CONFIG_USB_SE401=m
CONFIG_USB_SN9C102=m
CONFIG_USB_STV680=m
#
# USB Network Adapters
#
CONFIG_USB_CATC=m
CONFIG_USB_KAWETH=m
CONFIG_USB_PEGASUS=m
CONFIG_USB_RTL8150=m
CONFIG_USB_USBNET=m
#
# USB Host-to-Host Cables
#
CONFIG_USB_ALI_M5632=y
CONFIG_USB_AN2720=y
CONFIG_USB_BELKIN=y
CONFIG_USB_GENESYS=y
CONFIG_USB_NET1080=y
CONFIG_USB_PL2301=y
CONFIG_USB_KC2190=y
#
# Intelligent USB Devices/Gadgets
#
CONFIG_USB_ARMLINUX=y
CONFIG_USB_EPSON2888=y
CONFIG_USB_ZAURUS=y
CONFIG_USB_CDCETHER=y
#
# USB Network Adapters
#
CONFIG_USB_AX8817X=y
#
# USB port drivers
#
CONFIG_USB_USS720=m
#
# USB Serial Converter support
#
CONFIG_USB_SERIAL=m
CONFIG_USB_SERIAL_GENERIC=y
CONFIG_USB_SERIAL_BELKIN=m
CONFIG_USB_SERIAL_WHITEHEAT=m
CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m
CONFIG_USB_SERIAL_EMPEG=m
CONFIG_USB_SERIAL_FTDI_SIO=m
CONFIG_USB_SERIAL_VISOR=m
CONFIG_USB_SERIAL_IPAQ=m
CONFIG_USB_SERIAL_IR=m
CONFIG_USB_SERIAL_EDGEPORT=m
CONFIG_USB_SERIAL_EDGEPORT_TI=m
CONFIG_USB_SERIAL_KEYSPAN_PDA=m
CONFIG_USB_SERIAL_KEYSPAN=m
CONFIG_USB_SERIAL_KEYSPAN_MPR=y
CONFIG_USB_SERIAL_KEYSPAN_USA28=y
CONFIG_USB_SERIAL_KEYSPAN_USA28X=y
CONFIG_USB_SERIAL_KEYSPAN_USA28XA=y
CONFIG_USB_SERIAL_KEYSPAN_USA28XB=y
CONFIG_USB_SERIAL_KEYSPAN_USA19=y
CONFIG_USB_SERIAL_KEYSPAN_USA18X=y
CONFIG_USB_SERIAL_KEYSPAN_USA19W=y
CONFIG_USB_SERIAL_KEYSPAN_USA19QW=y
CONFIG_USB_SERIAL_KEYSPAN_USA19QI=y
CONFIG_USB_SERIAL_KEYSPAN_USA49W=y
CONFIG_USB_SERIAL_KEYSPAN_USA49WLC=y
CONFIG_USB_SERIAL_KLSI=m
CONFIG_USB_SERIAL_KOBIL_SCT=m
CONFIG_USB_SERIAL_MCT_U232=m
CONFIG_USB_SERIAL_PL2303=m
CONFIG_USB_SERIAL_SAFE=m
CONFIG_USB_SERIAL_SAFE_PADDED=y
CONFIG_USB_SERIAL_CYBERJACK=m
CONFIG_USB_SERIAL_XIRCOM=m
CONFIG_USB_SERIAL_OMNINET=m
CONFIG_USB_EZUSB=y
#
# USB Miscellaneous drivers
#
CONFIG_USB_EMI62=m
CONFIG_USB_EMI26=m
CONFIG_USB_AUERSWALD=m
CONFIG_USB_RIO500=m
CONFIG_USB_LEGOTOWER=m
CONFIG_USB_LCD=m
CONFIG_USB_LED=m
CONFIG_USB_CYTHERM=m
CONFIG_USB_PHIDGETSERVO=m
#
# USB ATM/DSL drivers
#
#
# USB Gadget Support
#
#
# MMC/SD Card support
#
#
# File systems
#
CONFIG_EXT2_FS=y
CONFIG_EXT2_FS_XATTR=y
CONFIG_EXT2_FS_POSIX_ACL=y
CONFIG_EXT2_FS_SECURITY=y
CONFIG_EXT3_FS=y
CONFIG_EXT3_FS_XATTR=y
CONFIG_EXT3_FS_POSIX_ACL=y
CONFIG_JBD=y
CONFIG_FS_MBCACHE=y
CONFIG_REISERFS_FS=y
CONFIG_REISERFS_FS_XATTR=y
CONFIG_REISERFS_FS_POSIX_ACL=y
CONFIG_REISERFS_FS_SECURITY=y
CONFIG_FS_POSIX_ACL=y
CONFIG_DNOTIFY=y
CONFIG_AUTOFS4_FS=y
#
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=y
CONFIG_JOLIET=y
CONFIG_UDF_FS=y
CONFIG_UDF_NLS=y
#
# DOS/FAT/NT Filesystems
#
CONFIG_FAT_FS=y
CONFIG_MSDOS_FS=y
CONFIG_VFAT_FS=y
CONFIG_FAT_DEFAULT_CODEPAGE=437
CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
CONFIG_NTFS_FS=m
#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
CONFIG_RAMFS=y
#
# Miscellaneous filesystems
#
CONFIG_SQUASHFS=y
#
# Network File Systems
#
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
CONFIG_NFS_V4=y
CONFIG_NFSD=y
CONFIG_NFSD_V3=y
CONFIG_NFSD_V4=y
CONFIG_NFSD_TCP=y
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
CONFIG_EXPORTFS=y
CONFIG_SUNRPC=y
CONFIG_SUNRPC_GSS=y
CONFIG_RPCSEC_GSS_KRB5=y
CONFIG_SMB_FS=y
CONFIG_CODA_FS=y
#
# Partition Types
#
CONFIG_MSDOS_PARTITION=y
#
# Native Language Support
#
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=y
CONFIG_NLS_ISO8859_1=y
#
# Profiling support
#
CONFIG_PROFILING=y
CONFIG_OPROFILE=y
#
# Kernel hacking
#
CONFIG_EARLY_PRINTK=y
CONFIG_4KSTACKS=y
#
# Security options
#
#
# Cryptographic options
#
CONFIG_CRYPTO=y
CONFIG_CRYPTO_MD5=y
CONFIG_CRYPTO_DES=y
#
# Library routines
#
CONFIG_CRC32=y
CONFIG_LIBCRC32C=m
CONFIG_ZLIB_INFLATE=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_X86_BIOS_REBOOT=y
CONFIG_PC=y

[jdgill0]

Nerdanel,

If you just sent me a PM in reply to the one I sent you earlier, it seems the Forums automatically deleted it, i.e. even though I got the email for a PM, the PM does not exists

[Gergan Penkov]

jgdill0, one more question, have you ever used framebuffer, because I see that you don't have it in this particular configuration.

[jdgill0]

jgdill0, one more question, have you ever used framebuffer, because I see that you don't have it in this particular configuration.

Nope. I have never used framebuffer, not even with the 2.6.11 kernels.

[Nerdanel]

jdgill0, I didn't notice you had sent a PM for me before you told me. I am planning to wait a few days to see if my system is stable now.

[ctford0]

just a trend ive noticed looking back through the past couple of pages.....

Is anyone having this random lockup problem that isn't using xorg 6.8.2 or greater?

chris

[jdgill0]

Well, here goes ... shoot me if you want ... I just experienced another crash

I made some changes to my system -- switched to using tmpfs for /tmp and /var/tmp. Anyways I rebooted all was OK, except I needed to move some KDE stuff out of /tmp, I was in konsole setting up the appropriate env variables in .bashrc ... saved that, switched to another virt desktop and BOOM CRASH ... logged in via ssh --> xorg at +96% cpu usage.

I explain the /tmp business just to be clear that I was doing something "semi-major" to my system ... but the crash had all the systems of the previous crashes -- I made it 60 hours without a crash.

Sorry people ... looks like I am back to square one again

[Nerdanel]

Is anyone having this random lockup problem that isn't using xorg 6.8.2 or greater?

Yes. Downgrading to 6.8.0 was one of the first things I tried.

[Gergan Penkov]

Ok I've installed the new xorg, and there seems to be more debug info, but this didn't help me in starting kde. Gnome starts fine, I must try to freeze it now, but I suppose this will be an easy task::))

Code: Select all

(II) resource ranges after xf86ClaimFixedResources() call:
	[0] -1	0	0xffe00000 - 0xffffffff (0x200000) MX[B](B)
	[1] -1	0	0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
	[2] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[3] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
	[4] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[5] -1	0	0xeb000000 - 0xeb0003f0 (0x3f1) MX[B]
	[6] -1	0	0xec001000 - 0xec001ff0 (0xff1) MX[B]
	[7] -1	0	0xec005000 - 0xec0050f0 (0xf1) MX[B]
	[8] -1	0	0xec004000 - 0xec004ff0 (0xff1) MX[B]
	[9] -1	0	0xec003000 - 0xec003ff0 (0xff1) MX[B]
	[10] -1	0	0xe0000000 - 0xdfffffff (0x0) MX[B]O
	[11] -1	0	0xe4000000 - 0xe8000000 (0x4000001) MX[B](B)
	[12] -1	0	0xe8000000 - 0xe8fffff0 (0xfffff1) MX[B](B)
	[13] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
	[14] -1	0	0x00000000 - 0x000000ff (0x100) IX[B]
	[15] -1	0	0x0000c400 - 0x0000c500 (0x101) IX[B]
	[16] -1	0	0x0000c000 - 0x0000c100 (0x101) IX[B]
	[17] -1	0	0x0000f000 - 0x0000f010 (0x11) IX[B]
	[18] -1	0	0x0000d800 - 0x0000d880 (0x81) IX[B]
	[19] -1	0	0x0000d400 - 0x0000d500 (0x101) IX[B]
	[20] -1	0	0x0000e400 - 0x0000e420 (0x21) IX[B]
(WW) ****INVALID MEM ALLOCATION**** b: 0xe4000000 e: 0xe8000000 correcting