ATI radeon Sticky (part 2)

[Wedge_]

My agpgart and nvidia_agp is compiled in the kernel, and dmesg shows the agp port and the card recognized just fine. fglrx also loads fine. Has anyone made 3D acceleration work with a nForce3 250 with agpgart and nvidia_agp configured in the kernel in 32-bit?

What you might want to try is compiling the AGP support as modules rather than compiling it into the kernel. This can sometimes be the difference between things working and not working.

Thanks, Wedge. I'll try it.

Should I compile both agpgart and nvidia_agp as modules? Does it make any sense to compile agpgart in the kernel and nvidia_agp as a module?

The usual thing to do is make both modules. Remember to load them before the fglrx module.

How do I know what AGP speed my card is running? Should be 4x.

Normally, you have to enable the "qt" USE flag and emerge ati-drivers-extra, then run fireglcontrol. That program should display the current AGP mode. However, that's a bit of a pain if you don't use QT normally (like me), so I mutilated the source code for fireglcontrol a bit and made a console version which just displays the AGP mode. It seems to work for me, so if you want to try it go ahead Download this archive, extract it, cd to fgl_agp, run "make", then "./fgl_agp". X has to be running for it to work properly.

@mvc: try appending "vmalloc=128M" to your bootloaders command line (the same place as you put framebuffer/bootsplash options etc).

[Sith_Happens]

Neato Torpeado Wedge, thx.

Code: Select all

root@BlueBox fgl_agp # /home/ryan/downloads/fgl_agp/fgl_agp
AGP mode: 8x

[nomaam]

My agpgart and nvidia_agp is compiled in the kernel, and dmesg shows the agp port and the card recognized just fine. fglrx also loads fine. Has anyone made 3D acceleration work with a nForce3 250 with agpgart and nvidia_agp configured in the kernel in 32-bit?

What you might want to try is compiling the AGP support as modules rather than compiling it into the kernel. This can sometimes be the difference between things working and not working.

Thanks, Wedge. I'll try it.

Should I compile both agpgart and nvidia_agp as modules? Does it make any sense to compile agpgart in the kernel and nvidia_agp as a module?

The usual thing to do is make both modules. Remember to load them before the fglrx module.

Wedge,

compiling as modules did not help. useinternalagpgart set to both yes and no did not help. Loaded the agpgart, nvidia_agp and fglrx in that order. I'd figure I'd start with Xorg.0.log first:


X Window System Version 6.8.2
Release Date: 9 February 2005
X Protocol Version 11, Revision 0, Release 6.8.2
Build Operating System: Linux 2.6.11-gentoo-r5 i686 [ELF]
Current Operating System: Linux TheMule 2.6.11-gentoo-r5 #1 Sun Apr 10 20:11:04 EDT 2005 i686
Build Date: 10 April 2005
Before reporting problems, check http://wiki.X.Org
to make sure that you have the latest version.
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Wed Apr 13 19:29:13 2005
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "Server Layout"
(**) |-->Screen "Screen0" (0)
(**) | |-->Monitor "Monitor0"
(**) | |-->Device "ATI Graphics Adapter"
(**) |-->Input Device "Mouse1"
(**) |-->Input Device "Keyboard1"
(**) FontPath set to "/usr/X11R6/lib/X11/fonts/local/,/usr/X11R6/lib/X11/fonts/misc/,/usr/X11R6/lib/X11/fonts/75dpi/:unscaled,/usr/X11R6/lib/X11/fonts/100dpi/:unscaled,/usr/X11R6/lib/X11/fonts/Type1/,/usr/X11R6/lib/X11/fonts/75dpi/,/usr/X11R6/lib/X11/fonts/100dpi/"
(**) RgbPath set to "/usr/X11R6/lib/X11/rgb"
(==) ModulePath set to "/usr/lib/modules"
(WW) Open APM failed (/dev/apm_bios) (No such file or directory)
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.2
X.Org Video Driver: 0.7
X.Org XInput driver : 0.4
X.Org Server Extension : 0.2
X.Org Font Renderer : 0.4
(II) Loader running on linux
(II) LoadModule: "bitmap"
(II) Loading /usr/lib/modules/fonts/libbitmap.a
(II) Module bitmap: vendor="X.Org Foundation"
compiled for 6.8.2, module version = 1.0.0
Module class: X.Org Font Renderer
ABI class: X.Org Font Renderer, version 0.4
(II) Loading font Bitmap
(II) LoadModule: "pcidata"
(II) Loading /usr/lib/modules/libpcidata.a
(II) Module pcidata: vendor="X.Org Foundation"
compiled for 6.8.2, module version = 1.0.0
ABI class: X.Org Video Driver, version 0.7
Using vt 7
(--) using VT number 7

(II) PCI: PCI scan (all values are in hex)
(II) PCI: 00:00:0: chip 10de,00e1 card 1462,0250 rev a1 class 06,00,00 hdr 00
(II) PCI: 00:01:0: chip 10de,00e0 card 1462,0250 rev a2 class 06,01,00 hdr 80
(II) PCI: 00:01:1: chip 10de,00e4 card 1462,0250 rev a1 class 0c,05,00 hdr 80
(II) PCI: 00:02:0: chip 10de,00e7 card 1462,0250 rev a1 class 0c,03,10 hdr 80
(II) PCI: 00:02:1: chip 10de,00e7 card 1462,0250 rev a1 class 0c,03,10 hdr 80
(II) PCI: 00:02:2: chip 10de,00e8 card 1462,0250 rev a2 class 0c,03,20 hdr 80
(II) PCI: 00:05:0: chip 10de,00df card 1462,0250 rev a2 class 06,80,00 hdr 00
(II) PCI: 00:06:0: chip 10de,00ea card 1462,7585 rev a1 class 04,01,00 hdr 00
(II) PCI: 00:08:0: chip 10de,00e5 card 1462,0250 rev a2 class 01,01,8a hdr 00
(II) PCI: 00:09:0: chip 10de,00ee card 1462,0250 rev a2 class 01,01,85 hdr 00
(II) PCI: 00:0b:0: chip 10de,00e2 card 0000,0000 rev a2 class 06,04,00 hdr 01
(II) PCI: 00:0e:0: chip 10de,00ed card 0000,0000 rev a2 class 06,04,00 hdr 01
(II) PCI: 00:18:0: chip 1022,1100 card 0000,0000 rev 00 class 06,00,00 hdr 80
(II) PCI: 00:18:1: chip 1022,1101 card 0000,0000 rev 00 class 06,00,00 hdr 80
(II) PCI: 00:18:2: chip 1022,1102 card 0000,0000 rev 00 class 06,00,00 hdr 80
(II) PCI: 00:18:3: chip 1022,1103 card 0000,0000 rev 00 class 06,00,00 hdr 80
(II) PCI: 01:00:0: chip 1002,4e44 card 1002,0002 rev 00 class 03,00,00 hdr 80
(II) PCI: 01:00:1: chip 1002,4e64 card 1002,0003 rev 00 class 03,80,00 hdr 00
(II) PCI: 02:0c:0: chip 1106,3044 card 0574,086c rev 46 class 0c,00,10 hdr 00
(II) PCI: 02:0d:0: chip 10ec,8169 card 1462,025c rev 10 class 02,00,00 hdr 00
(II) PCI: End of PCI scan
(II) Host-to-PCI bridge:
(II) Bus 0: bridge is at (0:0:0), (0,0,2), BCTRL: 0x0008 (VGA_EN is set)
(II) Bus 0 I/O range:
[0] -1 0 0x00000000 - 0x0000ffff (0x10000) IX
(II) Bus 0 non-prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX
(II) Bus 0 prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX
(II) PCI-to-ISA bridge:
(II) Bus -1: bridge is at (0:1:0), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is set)
(II) PCI-to-PCI bridge:
(II) Bus 1: bridge is at (0:11:0), (0,1,1), BCTRL: 0x000e (VGA_EN is set)
(II) Bus 1 I/O range:
[0] -1 0 0x00009000 - 0x000090ff (0x100) IX
[1] -1 0 0x00009400 - 0x000094ff (0x100) IX
[2] -1 0 0x00009800 - 0x000098ff (0x100) IX
[3] -1 0 0x00009c00 - 0x00009cff (0x100) IX
(II) Bus 1 non-prefetchable memory range:
[0] -1 0 0xf0000000 - 0xf1ffffff (0x2000000) MX
(II) Bus 1 prefetchable memory range:
[0] -1 0 0xe0000000 - 0xefffffff (0x10000000) MX
(II) PCI-to-PCI bridge:
(II) Bus 2: bridge is at (0:14:0), (0,2,2), BCTRL: 0x0206 (VGA_EN is cleared)
(II) Bus 2 I/O range:
[0] -1 0 0x0000a000 - 0x0000a0ff (0x100) IX
[1] -1 0 0x0000a400 - 0x0000a4ff (0x100) IX[B]
[2] -1 0 0x0000a800 - 0x0000a8ff (0x100) IX[B]
[3] -1 0 0x0000ac00 - 0x0000acff (0x100) IX[B]
(II) Bus 2 non-prefetchable memory range:
[0] -1 0 0xf2000000 - 0xf3ffffff (0x2000000) MX[B]
(II) Host-to-PCI bridge:
(II) Bus -1: bridge is at (0:24:0), (-1,-1,2), BCTRL: 0x0008 (VGA_EN is set)
(II) Bus -1 I/O range:
[0] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) Bus -1 non-prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
(II) Bus -1 prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
(II) Host-to-PCI bridge:
(II) Bus -1: bridge is at (0:24:1), (-1,-1,2), BCTRL: 0x0008 (VGA_EN is set)
(II) Bus -1 I/O range:
[0] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) Bus -1 non-prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
(II) Bus -1 prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
(II) Host-to-PCI bridge:
(II) Bus -1: bridge is at (0:24:2), (-1,-1,2), BCTRL: 0x0008 (VGA_EN is set)
(II) Bus -1 I/O range:
[0] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) Bus -1 non-prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
(II) Bus -1 prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
(II) Host-to-PCI bridge:
(II) Bus -1: bridge is at (0:24:3), (-1,-1,2), BCTRL: 0x0008 (VGA_EN is set)
(II) Bus -1 I/O range:
[0] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) Bus -1 non-prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
(II) Bus -1 prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
(--) PCI:*(1:0:0) ATI Technologies Inc Radeon R300 ND [Radeon 9700 Pro] rev 0, Mem @ 0xe0000000/27, 0xf1010000/16, I/O @ 0x9000/8
(--) PCI: (1:0:1) ATI Technologies Inc Radeon R300 [Radeon 9700 Pro] (Secondary) rev 0, Mem @ 0xe8000000/27, 0xf1000000/16
(II) Addressable bus resource ranges are
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
[1] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) OS-reported resource ranges:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[6] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
(II) PCI Memory resource overlap reduced 0xd0000000 from 0xdfffffff to 0xcfffffff
(II) Active PCI resource ranges:
[0] -1 0 0xf3000000 - 0xf30000ff (0x100) MX[B]
[1] -1 0 0xf3001000 - 0xf30017ff (0x800) MX[B]
[2] -1 0 0xf4001000 - 0xf4001fff (0x1000) MX[B]
[3] -1 0 0xf4000000 - 0xf4000fff (0x1000) MX[B]
[4] -1 0 0xf4005000 - 0xf40050ff (0x100) MX[B]
[5] -1 0 0xf4004000 - 0xf4004fff (0x1000) MX[B]
[6] -1 0 0xf4003000 - 0xf4003fff (0x1000) MX[B]
[7] -1 0 0xd0000000 - 0xcfffffff (0x0) MX[B]O
[8] -1 0 0xf1010000 - 0xf101ffff (0x10000) MX[B](B)
[9] -1 0 0xe0000000 - 0xe7ffffff (0x8000000) MX[B](B)
[10] -1 0 0x0000a400 - 0x0000a4ff (0x100) IX[B]
[11] -1 0 0x0000a000 - 0x0000a07f (0x80) IX[B]
[12] -1 0 0x0000dc00 - 0x0000dc7f (0x80) IX[B]
[13] -1 0 0x0000d800 - 0x0000d80f (0x10) IX[B]
[14] -1 0 0x00000b60 - 0x00000b63 (0x4) IX[B]
[15] -1 0 0x00000960 - 0x00000967 (0x8) IX[B]
[16] -1 0 0x00000be0 - 0x00000be3 (0x4) IX[B]
[17] -1 0 0x000009e0 - 0x000009e7 (0x8) IX[B]
[18] -1 0 0x0000f000 - 0x0000f00f (0x10) IX[B]
[19] -1 0 0x0000bc00 - 0x0000bc7f (0x80) IX[B]
[20] -1 0 0x0000b800 - 0x0000b8ff (0x100) IX[B]
[21] -1 0 0x0000b400 - 0x0000b407 (0x8) IX[B]
[22] -1 0 0x00004c40 - 0x00004c7f (0x40) IX[B]
[23] -1 0 0x00004c00 - 0x00004c3f (0x40) IX[B]
[24] -1 0 0x0000e000 - 0x0000e01f (0x20) IX[B]
[25] -1 0 0x00009000 - 0x000090ff (0x100) IX[B](B)
(II) Inactive PCI resource ranges:
[0] -1 0 0xf1000000 - 0xf100ffff (0x10000) MX[B](B)
[1] -1 0 0xe8000000 - 0xefffffff (0x8000000) MX[B](B)
(II) Active PCI resource ranges after removing overlaps:
[0] -1 0 0xf3000000 - 0xf30000ff (0x100) MX[B]
[1] -1 0 0xf3001000 - 0xf30017ff (0x800) MX[B]
[2] -1 0 0xf4001000 - 0xf4001fff (0x1000) MX[B]
[3] -1 0 0xf4000000 - 0xf4000fff (0x1000) MX[B]
[4] -1 0 0xf4005000 - 0xf40050ff (0x100) MX[B]
[5] -1 0 0xf4004000 - 0xf4004fff (0x1000) MX[B]
[6] -1 0 0xf4003000 - 0xf4003fff (0x1000) MX[B]
[7] -1 0 0xd0000000 - 0xcfffffff (0x0) MX[B]O
[8] -1 0 0xf1010000 - 0xf101ffff (0x10000) MX[B](B)
[9] -1 0 0xe0000000 - 0xe7ffffff (0x8000000) MX[B](B)
[10] -1 0 0x0000a400 - 0x0000a4ff (0x100) IX[B]
[11] -1 0 0x0000a000 - 0x0000a07f (0x80) IX[B]
[12] -1 0 0x0000dc00 - 0x0000dc7f (0x80) IX[B]
[13] -1 0 0x0000d800 - 0x0000d80f (0x10) IX[B]
[14] -1 0 0x00000b60 - 0x00000b63 (0x4) IX[B]
[15] -1 0 0x00000960 - 0x00000967 (0x8) IX[B]
[16] -1 0 0x00000be0 - 0x00000be3 (0x4) IX[B]
[17] -1 0 0x000009e0 - 0x000009e7 (0x8) IX[B]
[18] -1 0 0x0000f000 - 0x0000f00f (0x10) IX[B]
[19] -1 0 0x0000bc00 - 0x0000bc7f (0x80) IX[B]
[20] -1 0 0x0000b800 - 0x0000b8ff (0x100) IX[B]
[21] -1 0 0x0000b400 - 0x0000b407 (0x8) IX[B]
[22] -1 0 0x00004c40 - 0x00004c7f (0x40) IX[B]
[23] -1 0 0x00004c00 - 0x00004c3f (0x40) IX[B]
[24] -1 0 0x0000e000 - 0x0000e01f (0x20) IX[B]
[25] -1 0 0x00009000 - 0x000090ff (0x100) IX[B](B)
(II) Inactive PCI resource ranges after removing overlaps:
[0] -1 0 0xf1000000 - 0xf100ffff (0x10000) MX[B](B)
[1] -1 0 0xe8000000 - 0xefffffff (0x8000000) MX[B](B)
(II) OS-reported resource ranges after removing overlaps with PCI:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[6] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
(II) All system resource ranges:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0xf3000000 - 0xf30000ff (0x100) MX[B]
[6] -1 0 0xf3001000 - 0xf30017ff (0x800) MX[B]
[7] -1 0 0xf4001000 - 0xf4001fff (0x1000) MX[B]
[8] -1 0 0xf4000000 - 0xf4000fff (0x1000) MX[B]
[9] -1 0 0xf4005000 - 0xf40050ff (0x100) MX[B]
[10] -1 0 0xf4004000 - 0xf4004fff (0x1000) MX[B]
[11] -1 0 0xf4003000 - 0xf4003fff (0x1000) MX[B]
[12] -1 0 0xd0000000 - 0xcfffffff (0x0) MX[B]O
[13] -1 0 0xf1010000 - 0xf101ffff (0x10000) MX[B](B)
[14] -1 0 0xe0000000 - 0xe7ffffff (0x8000000) MX[B](B)
[15] -1 0 0xf1000000 - 0xf100ffff (0x10000) MX[B](B)
[16] -1 0 0xe8000000 - 0xefffffff (0x8000000) MX[B](B)
[17] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[18] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[19] -1 0 0x0000a400 - 0x0000a4ff (0x100) IX[B]
[20] -1 0 0x0000a000 - 0x0000a07f (0x80) IX[B]
[21] -1 0 0x0000dc00 - 0x0000dc7f (0x80) IX[B]
[22] -1 0 0x0000d800 - 0x0000d80f (0x10) IX[B]
[23] -1 0 0x00000b60 - 0x00000b63 (0x4) IX[B]
[24] -1 0 0x00000960 - 0x00000967 (0x8) IX[B]
[25] -1 0 0x00000be0 - 0x00000be3 (0x4) IX[B]
[26] -1 0 0x000009e0 - 0x000009e7 (0x8) IX[B]
[27] -1 0 0x0000f000 - 0x0000f00f (0x10) IX[B]
[28] -1 0 0x0000bc00 - 0x0000bc7f (0x80) IX[B]
[29] -1 0 0x0000b800 - 0x0000b8ff (0x100) IX[B]
[30] -1 0 0x0000b400 - 0x0000b407 (0x8) IX[B]
[31] -1 0 0x00004c40 - 0x00004c7f (0x40) IX[B]
[32] -1 0 0x00004c00 - 0x00004c3f (0x40) IX[B]
[33] -1 0 0x0000e000 - 0x0000e01f (0x20) IX[B]
[34] -1 0 0x00009000 - 0x000090ff (0x100) IX[B](B)
(II) LoadModule: "dbe"
(II) Loading /usr/lib/modules/extensions/libdbe.a
(II) Module dbe: vendor="X.Org Foundation"
compiled for 6.8.2, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.2
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "extmod"
(II) Loading /usr/lib/modules/extensions/libextmod.a
(II) Module extmod: vendor="X.Org Foundation"
compiled for 6.8.2, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.2
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension DPMS
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "type1"
(II) Loading /usr/lib/modules/fonts/libtype1.a
(II) Module type1: vendor="X.Org Foundation"
compiled for 6.8.2, module version = 1.0.2
Module class: X.Org Font Renderer
ABI class: X.Org Font Renderer, version 0.4
(II) Loading font Type1
(II) Loading font CID
(II) LoadModule: "freetype"
(II) Loading /usr/lib/modules/fonts/libfreetype.so
(II) Module freetype: vendor="X.Org Foundation & the After X-TT Project"
compiled for 6.8.2, module version = 2.1.0
Module class: X.Org Font Renderer
ABI class: X.Org Font Renderer, version 0.4
(II) Loading font FreeType
(II) LoadModule: "glx"
(II) Loading /usr/lib/modules/extensions/libglx.a
(II) Module glx: vendor="X.Org Foundation"
compiled for 6.8.2, module version = 1.0.0
ABI class: X.Org Server Extension, version 0.2
(II) Loading sub module "GLcore"
(II) LoadModule: "GLcore"
(II) Loading /usr/lib/modules/extensions/libGLcore.a
(II) Module GLcore: vendor="X.Org Foundation"
compiled for 6.8.2, module version = 1.0.0
ABI class: X.Org Server Extension, version 0.2
(II) Loading extension GLX
(II) LoadModule: "dri"
(II) Loading /usr/lib/modules/extensions/libdri.a
(II) Module dri: vendor="X.Org Foundation"
compiled for 6.8.2, module version = 1.0.0
ABI class: X.Org Server Extension, version 0.2
(II) Loading sub module "drm"
(II) LoadModule: "drm"
(II) Loading /usr/lib/modules/linux/libdrm.a
(II) Module drm: vendor="X.Org Foundation"
compiled for 6.8.2, module version = 1.0.0
ABI class: X.Org Server Extension, version 0.2
(II) Loading extension XFree86-DRI
(II) LoadModule: "fglrx"
(II) Loading /usr/lib/modules/drivers/fglrx_drv.o
(II) Module fglrx: vendor="FireGL - ATI Technologies Inc."
compiled for 6.8.0, module version = 8.12.10
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 0.7
(II) LoadModule: "mouse"
(II) Loading /usr/lib/modules/input/mouse_drv.o
(II) Module mouse: vendor="X.Org Foundation"
compiled for 6.8.2, module version = 1.0.0
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 0.4
(II) LoadModule: "kbd"
(II) Loading /usr/lib/modules/input/kbd_drv.o
(II) Module kbd: vendor="X.Org Foundation"
compiled for 6.8.2, module version = 1.0.0
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 0.4
(II) ATI Radeon/FireGL: The following chipsets are supported:
RADEON 9000/9000 PRO (RV250 4966), RADEON 9000 LE (RV250 4967),
MOBILITY FireGL 9000 (M9 4C64), MOBILITY RADEON 9000 (M9 4C66),
RADEON 9000 PRO (D9 4C67), RADEON 9250 (RV280 5960),
RADEON 9200 (RV280 5961), RADEON 9200 SE (RV280 5964),
MOBILITY RADEON 9200 (M9+ 5C61), MOBILITY RADEON 9200 (M9+ 5C63),
FireGL 8800 (R200 5148), RADEON 8500 (R200 514C),
RADEON 9100 (R200 514D), RADEON 8500 AIW (R200 4242),
RADEON 9600 (RV350 4150), RADEON 9600 SE (RV350 4151),
RADEON 9600 PRO (RV360 4152),
MOBILITY RADEON 9600/9700 (M10/M11 4E50), RADEON 9500 (R300 4144),
RADEON 9600 TX (R300 4146), FireGL Z1 (R300 4147),
RADEON 9700 PRO (R300 4E44), RADEON 9500 PRO/9700 (R300 4E45),
RADEON 9600 TX (R300 4E46), FireGL X1 (R300 4E47),
RADEON 9800 SE (R350 4148), RADEON 9550 (RV350 4153),
FireGL T2 (RV350 4154), RADEON 9800 PRO (R350 4E48),
RADEON 9800 (R350 4E49), RADEON 9800 XT (R360 4E4A),
FireGL X2-256/X2-256t (R350 4E4B),
MOBILITY FireGL T2/T2e (M10/M11 4E54), RADEON X300 (RV370 5B60),
RADEON X600 (RV380 5B62), FireGL V3100 (RV370 5B64),
MOBILITY RADEON X300 (M22 5460), MOBILITY FireGL V3100 (M22 5464),
RADEON X600 (RV380 3E50), FireGL V3200 (RV380 3E54),
MOBILITY RADEON X600 (M24 3150), MOBILITY RADEON X300 (M22 3152),
MOBILITY FireGL V3200 (M24 3154), RADEON X800 (R420 4A48),
RADEON X800 PRO (R420 4A49), RADEON X800 SE (R420 4A4A),
RADEON X800 XT (R420 4A4B), RADEON X800 (R420 4A4C),
FireGL X3-256 (R420 4A4D), MOBILITY RADEON 9800 (M18 4A4E),
RADEON X800 XT Platinum Edition (R420 4A50), RADEON X800 (R423 5548),
RADEON X800 PRO (R423 5549),
RADEON X800 XT Platinum Edition (R423 554A),
RADEON X800 SE (R423 554B), RADEON X800 XT (R423 5D57),
FireGL V7100 (R423 5550), FireGL V5100 (R423 5551),
MOBILITY RADEON X800 XT (M28 5D48), MOBILITY FireGL V5100 (M28 5D49),
MOBILITY FireGL V5000 (M26 564A), MOBILITY FireGL V5000 (M26 564B),
FireGL V5000 (RV410 5E48), FireGL V3300 (RV410 5E49),
RADEON X700 XT (RV410 5E4A), RADEON X700 PRO (RV410 5E4B),
RADEON X700 SE (RV410 5E4C), RADEON X700 (RV410 5E4D),
RADEON X700 (RV410 5E4F), MOBILITY RADEON X700 (M26 5652),
MOBILITY RADEON X700 (M26 5653), RADEON 9100 IGP (RS300 5834),
RADEON 9000 PRO/9100 PRO IGP (RS350 7834),
MOBILITY RADEON 9000/9100 IGP (RS300M 5835)
(II) Primary Device is: PCI 01:00:0
(WW) fglrx: No matching Device section for instance (BusID PCI:1:0:1) found
(--) Chipset RADEON 9700 PRO (R300 4E44) found
(II) resource ranges after xf86ClaimFixedResources() call:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0xf3000000 - 0xf30000ff (0x100) MX[B]
[6] -1 0 0xf3001000 - 0xf30017ff (0x800) MX[B]
[7] -1 0 0xf4001000 - 0xf4001fff (0x1000) MX[B]
[8] -1 0 0xf4000000 - 0xf4000fff (0x1000) MX[B]
[9] -1 0 0xf4005000 - 0xf40050ff (0x100) MX[B]
[10] -1 0 0xf4004000 - 0xf4004fff (0x1000) MX[B]
[11] -1 0 0xf4003000 - 0xf4003fff (0x1000) MX[B]
[12] -1 0 0xd0000000 - 0xcfffffff (0x0) MX[B]O
[13] -1 0 0xf1010000 - 0xf101ffff (0x10000) MX[B](B)
[14] -1 0 0xe0000000 - 0xe7ffffff (0x8000000) MX[B](B)
[15] -1 0 0xf1000000 - 0xf100ffff (0x10000) MX[B](B)
[16] -1 0 0xe8000000 - 0xefffffff (0x8000000) MX[B](B)
[17] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[18] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[19] -1 0 0x0000a400 - 0x0000a4ff (0x100) IX[B]
[20] -1 0 0x0000a000 - 0x0000a07f (0x80) IX[B]
[21] -1 0 0x0000dc00 - 0x0000dc7f (0x80) IX[B]
[22] -1 0 0x0000d800 - 0x0000d80f (0x10) IX[B]
[23] -1 0 0x00000b60 - 0x00000b63 (0x4) IX[B]
[24] -1 0 0x00000960 - 0x00000967 (0x8) IX[B]
[25] -1 0 0x00000be0 - 0x00000be3 (0x4) IX[B]
[26] -1 0 0x000009e0 - 0x000009e7 (0x8) IX[B]
[27] -1 0 0x0000f000 - 0x0000f00f (0x10) IX[B]
[28] -1 0 0x0000bc00 - 0x0000bc7f (0x80) IX[B]
[29] -1 0 0x0000b800 - 0x0000b8ff (0x100) IX[B]
[30] -1 0 0x0000b400 - 0x0000b407 (0x8) IX[B]
[31] -1 0 0x00004c40 - 0x00004c7f (0x40) IX[B]
[32] -1 0 0x00004c00 - 0x00004c3f (0x40) IX[B]
[33] -1 0 0x0000e000 - 0x0000e01f (0x20) IX[B]
[34] -1 0 0x00009000 - 0x000090ff (0x100) IX[B](B)
(II) fglrx(0): pEnt->device->identifier=0x8221690
(II) resource ranges after probing:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0xf3000000 - 0xf30000ff (0x100) MX[B]
[6] -1 0 0xf3001000 - 0xf30017ff (0x800) MX[B]
[7] -1 0 0xf4001000 - 0xf4001fff (0x1000) MX[B]
[8] -1 0 0xf4000000 - 0xf4000fff (0x1000) MX[B]
[9] -1 0 0xf4005000 - 0xf40050ff (0x100) MX[B]
[10] -1 0 0xf4004000 - 0xf4004fff (0x1000) MX[B]
[11] -1 0 0xf4003000 - 0xf4003fff (0x1000) MX[B]
[12] -1 0 0xd0000000 - 0xcfffffff (0x0) MX[B]O
[13] -1 0 0xf1010000 - 0xf101ffff (0x10000) MX[B](B)
[14] -1 0 0xe0000000 - 0xe7ffffff (0x8000000) MX[B](B)
[15] -1 0 0xf1000000 - 0xf100ffff (0x10000) MX[B](B)
[16] -1 0 0xe8000000 - 0xefffffff (0x8000000) MX[B](B)
[17] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B]
[18] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B]
[19] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B]
[20] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[21] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[22] -1 0 0x0000a400 - 0x0000a4ff (0x100) IX[B]
[23] -1 0 0x0000a000 - 0x0000a07f (0x80) IX[B]
[24] -1 0 0x0000dc00 - 0x0000dc7f (0x80) IX[B]
[25] -1 0 0x0000d800 - 0x0000d80f (0x10) IX[B]
[26] -1 0 0x00000b60 - 0x00000b63 (0x4) IX[B]
[27] -1 0 0x00000960 - 0x00000967 (0x8) IX[B]
[28] -1 0 0x00000be0 - 0x00000be3 (0x4) IX[B]
[29] -1 0 0x000009e0 - 0x000009e7 (0x8) IX[B]
[30] -1 0 0x0000f000 - 0x0000f00f (0x10) IX[B]
[31] -1 0 0x0000bc00 - 0x0000bc7f (0x80) IX[B]
[32] -1 0 0x0000b800 - 0x0000b8ff (0x100) IX[B]
[33] -1 0 0x0000b400 - 0x0000b407 (0x8) IX[B]
[34] -1 0 0x00004c40 - 0x00004c7f (0x40) IX[B]
[35] -1 0 0x00004c00 - 0x00004c3f (0x40) IX[B]
[36] -1 0 0x0000e000 - 0x0000e01f (0x20) IX[B]
[37] -1 0 0x00009000 - 0x000090ff (0x100) IX[B](B)
[38] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B]
[39] 0 0 0x000003c0 - 0x000003df (0x20) IS[B]
(II) Setting vga for screen 0.
(II) fglrx(0): === [R200PreInit] === begin, [s]
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/lib/modules/libvgahw.a
(II) Module vgahw: vendor="X.Org Foundation"
compiled for 6.8.2, module version = 0.1.0
ABI class: X.Org Video Driver, version 0.7
(II) fglrx(0): PCI bus 1 card 0 func 0
(**) fglrx(0): Depth 24, (--) framebuffer bpp 32
(II) fglrx(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
(==) fglrx(0): Default visual is TrueColor
(**) fglrx(0): Option "NoAccel" "no"
(**) fglrx(0): Option "NoDRI" "no"
(**) fglrx(0): Option "Capabilities" "0x00000000"
(**) fglrx(0): Option "GammaCorrectionI" "0x00000000"
(**) fglrx(0): Option "GammaCorrectionII" "0x00000000"
(**) fglrx(0): Option "OpenGLOverlay" "off"
(**) fglrx(0): Option "VideoOverlay" "on"
(**) fglrx(0): Option "DesktopSetup" "0x00000000"
(**) fglrx(0): Option "MonitorLayout" "AUTO, AUTO"
(**) fglrx(0): Option "HSync2" "unspecified"
(**) fglrx(0): Option "VRefresh2" "unspecified"
(**) fglrx(0): Option "ScreenOverlap" "0"
(**) fglrx(0): Option "IgnoreEDID" "off"
(**) fglrx(0): Option "UseInternalAGPGART" "yes"
(**) fglrx(0): Option "Stereo" "off"
(**) fglrx(0): Option "StereoSyncEnable" "1"
(**) fglrx(0): Option "UseFastTLS" "2"
(**) fglrx(0): Option "BlockSignalsOnLock" "on"
(**) fglrx(0): Option "ForceGenericCPU" "no"
(**) fglrx(0): Option "CenterMode" "off"
(**) fglrx(0): Option "FSAAScale" "1"
(**) fglrx(0): Option "FSAAEnable" "no"
(**) fglrx(0): Option "FSAADisableGamma" "no"
(**) fglrx(0): Option "FSAACustomizeMSPos" "no"
(**) fglrx(0): Option "FSAAMSPosX0" "0.000000"
(**) fglrx(0): Option "FSAAMSPosY0" "0.000000"
(**) fglrx(0): Option "FSAAMSPosX1" "0.000000"
(**) fglrx(0): Option "FSAAMSPosY1" "0.000000"
(**) fglrx(0): Option "FSAAMSPosX2" "0.000000"
(**) fglrx(0): Option "FSAAMSPosY2" "0.000000"
(**) fglrx(0): Option "FSAAMSPosX3" "0.000000"
(**) fglrx(0): Option "FSAAMSPosY3" "0.000000"
(**) fglrx(0): Option "FSAAMSPosX4" "0.000000"
(**) fglrx(0): Option "FSAAMSPosY4" "0.000000"
(**) fglrx(0): Option "FSAAMSPosX5" "0.000000"
(**) fglrx(0): Option "FSAAMSPosY5" "0.000000"
(**) fglrx(0): Option "NoTV" "yes"
(**) fglrx(0): Option "TVStandard" "NTSC-M"
(**) fglrx(0): Option "TVHSizeAdj" "0"
(**) fglrx(0): Option "TVVSizeAdj" "0"
(**) fglrx(0): Option "TVHPosAdj" "0"
(**) fglrx(0): Option "TVVPosAdj" "0"
(**) fglrx(0): Option "TVHStartAdj" "0"
(**) fglrx(0): Option "TVColorAdj" "0"
(**) fglrx(0): Option "PseudoColorVisuals" "off"
(**) fglrx(0): Qbs disabled
(==) fglrx(0): FAST_SWAP disabled
(==) fglrx(0): RGB weight 888
(II) fglrx(0): Using 8 bits per RGB (8 bit DAC)
(**) fglrx(0): Gamma Correction for I is 0x00000000
(**) fglrx(0): Gamma Correction for II is 0x00000000
(==) fglrx(0): Buffer Tiling is ON
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Loading /usr/lib/modules/linux/libint10.a
(II) Module int10: vendor="X.Org Foundation"
compiled for 6.8.2, module version = 1.0.0
ABI class: X.Org Video Driver, version 0.7
(II) fglrx(0): initializing int10
(II) fglrx(0): Primary V_BIOS segment is: 0xc000
(**) fglrx(0): Option "mtrr" "off"
(--) fglrx(0): Chipset: "RADEON 9700 PRO (R300 4E44)" (Chipset = 0x4e44)
(--) fglrx(0): (PciSubVendor = 0x1002, PciSubDevice = 0x0002)
(--) fglrx(0): board vendor info: original ATI grafics adapter
(--) fglrx(0): Linear framebuffer (phys) at 0xe0000000
(--) fglrx(0): MMIO registers at 0xf1010000
(--) fglrx(0): ChipExtRevID = 0x00
(--) fglrx(0): ChipIntRevID = 0x02
(--) fglrx(0): VideoRAM: 131072 kByte (64-bit SDR SDRAM)
(II) fglrx(0): board/chipset is supported by this driver (original ATI board)
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Loading /usr/lib/modules/libddc.a
(II) Module ddc: vendor="X.Org Foundation"
compiled for 6.8.2, module version = 1.0.0
ABI class: X.Org Video Driver, version 0.7
(II) Loading sub module "i2c"
(II) LoadModule: "i2c"
(II) Loading /usr/lib/modules/libi2c.a
(II) Module i2c: vendor="X.Org Foundation"
compiled for 6.8.2, module version = 1.2.0
ABI class: X.Org Video Driver, version 0.7
(II) fglrx(0): I2C bus "DDC" initialized.
(II) fglrx(0): Connector Layout from BIOS --------
(II) fglrx(0): Connector1: DDCType-3, DACType-0, TMDSType--1, ConnectorType-2
(II) fglrx(0): Connector0: DDCType-2, DACType-1, TMDSType-0, ConnectorType-3
(**) fglrx(0): MonitorLayout Option:
Monitor1--Type AUTO, Monitor2--Type AUTO

(II) fglrx(0): I2C device "DDC:ddc2" registered at address 0xA0.
(II) fglrx(0): I2C device "DDC:ddc2" removed.
(II) fglrx(0): I2C device "DDC:ddc2" registered at address 0xA0.
(II) fglrx(0): I2C device "DDC:ddc2" removed.
(II) fglrx(0): I2C device "DDC:ddc2" registered at address 0xA0.
(II) fglrx(0): I2C device "DDC:ddc2" removed.
(II) fglrx(0): DDC detected on DDCType 2 with Monitor Type 0
(II) fglrx(0): I2C device "DDC:ddc2" registered at address 0xA0.
(II) fglrx(0): I2C device "DDC:ddc2" removed.
(II) fglrx(0): I2C device "DDC:ddc2" registered at address 0xA0.
(II) fglrx(0): I2C device "DDC:ddc2" removed.
(II) fglrx(0): DDC detected on DDCType 3 with Monitor Type 1
(II) fglrx(0): Primary head:
Monitor -- NONE
Connector -- DVI-I
DAC Type -- TVDAC/ExtDAC
TMDS Type -- Internal
DDC Type -- DVI_DDC
(II) fglrx(0): Secondary head:
Monitor -- CRT
Connector -- VGA
DAC Type -- Primary
TMDS Type -- NONE
DDC Type -- VGA_DDC
(II) fglrx(0): EDID data from the display on Secondary head ---------------------------
(II) fglrx(0): Manufacturer: DEL Model: 5155 Serial#: 808472151
(II) fglrx(0): Year: 1999 Week: 2
(II) fglrx(0): EDID Version: 1.1
(II) fglrx(0): Analog Display Input, Input Voltage Level: 0.714/0.286 V
(II) fglrx(0): Sync: Separate Composite SyncOnGreen
(II) fglrx(0): Max H-Image Size [cm]: horiz.: 33 vert.: 24
(II) fglrx(0): Gamma: 2.50
(II) fglrx(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display
(II) fglrx(0): redX: 0.625 redY: 0.340 greenX: 0.280 greenY: 0.595
(II) fglrx(0): blueX: 0.155 blueY: 0.070 whiteX: 0.283 whiteY: 0.298
(II) fglrx(0): Supported VESA Video Modes:
(II) fglrx(0): 720x400@70Hz
(II) fglrx(0): 640x480@60Hz
(II) fglrx(0): 640x480@75Hz
(II) fglrx(0): 800x600@60Hz
(II) fglrx(0): 800x600@75Hz
(II) fglrx(0): 1024x768@60Hz
(II) fglrx(0): 1024x768@75Hz
(II) fglrx(0): 1280x1024@75Hz
(II) fglrx(0): Manufacturer's mask: 0
(II) fglrx(0): Supported Future Video Modes:
(II) fglrx(0): #0: hsize: 640 vsize 480 refresh: 85 vid: 22833
(II) fglrx(0): #1: hsize: 800 vsize 600 refresh: 85 vid: 22853
(II) fglrx(0): #2: hsize: 1024 vsize 768 refresh: 85 vid: 22881
(II) fglrx(0): #3: hsize: 1600 vsize 1200 refresh: 65 vid: 17833
(II) fglrx(0): Supported additional Video Mode:
(II) fglrx(0): clock: 28.3 MHz Image Size: 250 x 184 mm
(II) fglrx(0): h_active: 720 h_sync: 738 h_sync_end 846 h_blank_end 900 h_border: 0
(II) fglrx(0): v_active: 350 v_sync: 388 v_sync_end 390 v_blanking: 449 v_border: 0
(II) fglrx(0): Serial No: 55341C00NW19
(II) fglrx(0): Monitor name: DELL D1025TM
(II) fglrx(0): Ranges: V min: 50 V max: 120 Hz, H min: 30 H max: 85 kHz,
(II) fglrx(0):
(II) fglrx(0): DesktopSetup 0x0000
(**) fglrx(0): PseudoColor visuals disabled
(**) fglrx(0): Overlay disabled
(**) fglrx(0): Overlay disabled
(II) fglrx(0): PLL parameters: rf=2700 rd=12 min=20000 max=40000
(==) fglrx(0): Using gamma correction (1.0, 1.0, 1.0)
(**) fglrx(0): Center Mode is disabled
(==) fglrx(0): TMDS coherent mode is enabled
(II) fglrx(0): Total 5 valid mode(s) found.
(--) fglrx(0): Virtual size is 1280x1024 (pitch 1280)
(**) fglrx(0): *Default mode "1280x1024": 135.0 MHz (scaled from 0.0 MHz), 80.0 kHz, 75.0 Hz
(II) fglrx(0): Modeline "1280x1024" 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync
(**) fglrx(0): *Default mode "1024x768": 94.5 MHz (scaled from 0.0 MHz), 68.7 kHz, 85.0 Hz
(II) fglrx(0): Modeline "1024x768" 94.50 1024 1072 1168 1376 768 769 772 808 +hsync +vsync
(**) fglrx(0): *Default mode "800x600": 56.3 MHz (scaled from 0.0 MHz), 53.7 kHz, 85.1 Hz
(II) fglrx(0): Modeline "800x600" 56.30 800 832 896 1048 600 601 604 631 +hsync +vsync
(**) fglrx(0): Default mode "640x480": 36.0 MHz (scaled from 0.0 MHz), 43.3 kHz, 85.0 Hz
(II) fglrx(0): Modeline "640x480" 36.00 640 696 752 832 480 481 484 509 -hsync -vsync
(**) fglrx(0): Default mode "720x350": 28.3 MHz (scaled from 0.0 MHz), 31.5 kHz, 70.1 Hz
(II) fglrx(0): Modeline "720x350" 28.32 720 738 846 900 350 388 390 449
(--) fglrx(0): Display dimensions: (330, 240) mm
(--) fglrx(0): DPI set to (98, 108)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/modules/libfb.a
(II) Module fb: vendor="X.Org Foundation"
compiled for 6.8.2, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.2
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Loading /usr/lib/modules/libramdac.a
(II) Module ramdac: vendor="X.Org Foundation"
compiled for 6.8.2, module version = 0.1.0
ABI class: X.Org Video Driver, version 0.7
(**) fglrx(0): NoAccel = NO
(II) Loading sub module "xaa"
(II) LoadModule: "xaa"
(II) Loading /usr/lib/modules/libxaa.a
(II) Module xaa: vendor="X.Org Foundation"
compiled for 6.8.2, module version = 1.2.0
ABI class: X.Org Video Driver, version 0.7
(==) fglrx(0): HPV inactive
(==) fglrx(0): FSAA enabled: NO
(**) fglrx(0): FSAA Gamma enabled
(**) fglrx(0): FSAA Multisample Position is fix
(**) fglrx(0): NoDRI = NO
(II) Loading sub module "fglrxdrm"
(II) LoadModule: "fglrxdrm"
(II) Loading /usr/lib/modules/linux/libfglrxdrm.a
(II) Module fglrxdrm: vendor="FireGL - ATI Technologies Inc."
compiled for 6.8.0, module version = 8.12.10
ABI class: X.Org Server Extension, version 0.2
(II) fglrx(0): Depth moves disabled by default
(**) fglrx(0): Capabilities: 0x00000000
(**) fglrx(0): cpuFlags: 0x4000001f
(**) fglrx(0): cpuSpeedMHz: 0x000007d9
(==) fglrx(0): OpenGL ClientDriverName: "fglrx_dri.so"
(**) fglrx(0): using built in AGPGART module: yes
(**) fglrx(0): UseFastTLS=2
(**) fglrx(0): BlockSignalsOnLock=1
(==) fglrx(0): EnablePrivateBackZ = NO
(--) Depth 24 pixmap format is 32 bpp
(II) do I need RAC? No, I don't.
(II) resource ranges after preInit:
[0] 0 0 0xf1010000 - 0xf101ffff (0x10000) MX[B]
[1] 0 0 0xe0000000 - 0xe7ffffff (0x8000000) MX[B]
[2] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[3] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[4] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[5] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[6] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[7] -1 0 0xf3000000 - 0xf30000ff (0x100) MX[B]
[8] -1 0 0xf3001000 - 0xf30017ff (0x800) MX[B]
[9] -1 0 0xf4001000 - 0xf4001fff (0x1000) MX[B]
[10] -1 0 0xf4000000 - 0xf4000fff (0x1000) MX[B]
[11] -1 0 0xf4005000 - 0xf40050ff (0x100) MX[B]
[12] -1 0 0xf4004000 - 0xf4004fff (0x1000) MX[B]
[13] -1 0 0xf4003000 - 0xf4003fff (0x1000) MX[B]
[14] -1 0 0xd0000000 - 0xcfffffff (0x0) MX[B]O
[15] -1 0 0xf1010000 - 0xf101ffff (0x10000) MX[B](B)
[16] -1 0 0xe0000000 - 0xe7ffffff (0x8000000) MX[B](B)
[17] -1 0 0xf1000000 - 0xf100ffff (0x10000) MX[B](B)
[18] -1 0 0xe8000000 - 0xefffffff (0x8000000) MX[B](B)
[19] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B]
[20] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B]
[21] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B]
[22] 0 0 0x00009000 - 0x000090ff (0x100) IX[B]
[23] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[24] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[25] -1 0 0x0000a400 - 0x0000a4ff (0x100) IX[B]
[26] -1 0 0x0000a000 - 0x0000a07f (0x80) IX[B]
[27] -1 0 0x0000dc00 - 0x0000dc7f (0x80) IX[B]
[28] -1 0 0x0000d800 - 0x0000d80f (0x10) IX[B]
[29] -1 0 0x00000b60 - 0x00000b63 (0x4) IX[B]
[30] -1 0 0x00000960 - 0x00000967 (0x8) IX[B]
[31] -1 0 0x00000be0 - 0x00000be3 (0x4) IX[B]
[32] -1 0 0x000009e0 - 0x000009e7 (0x8) IX[B]
[33] -1 0 0x0000f000 - 0x0000f00f (0x10) IX[B]
[34] -1 0 0x0000bc00 - 0x0000bc7f (0x80) IX[B]
[35] -1 0 0x0000b800 - 0x0000b8ff (0x100) IX[B]
[36] -1 0 0x0000b400 - 0x0000b407 (0x8) IX[B]
[37] -1 0 0x00004c40 - 0x00004c7f (0x40) IX[B]
[38] -1 0 0x00004c00 - 0x00004c3f (0x40) IX[B]
[39] -1 0 0x0000e000 - 0x0000e01f (0x20) IX[B]
[40] -1 0 0x00009000 - 0x000090ff (0x100) IX[B](B)
[41] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B]
[42] 0 0 0x000003c0 - 0x000003df (0x20) IS[B]
(II) fglrx(0): UMM area: 0xe0701000 (size=0x078ff000)
(II) fglrx(0): driver needs X.org 6.8.x
(II) fglrx(0): detected X.org 6.8.2
(II) Loading extension ATIFGLRXDRI
(II) fglrx(0): doing DRIScreenInit
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 5, (OK)
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 5, (OK)
drmOpenByBusid: Searching for BusID PCI:1:0:0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 5, (OK)
drmOpenByBusid: drmOpenMinor returns 5
drmOpenByBusid: drmGetBusid reports
drmOpenDevice: node name is /dev/dri/card1
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -1023
drmOpenDevice: node name is /dev/dri/card2
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -1023
drmOpenDevice: node name is /dev/dri/card3
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -1023
drmOpenDevice: node name is /dev/dri/card4
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -1023
drmOpenDevice: node name is /dev/dri/card5
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -1023
drmOpenDevice: node name is /dev/dri/card6
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -1023
drmOpenDevice: node name is /dev/dri/card7
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -1023
drmOpenDevice: node name is /dev/dri/card8
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -1023
drmOpenDevice: node name is /dev/dri/card9
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -1023
drmOpenDevice: node name is /dev/dri/card10
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -1023
drmOpenDevice: node name is /dev/dri/card11
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -1023
drmOpenDevice: node name is /dev/dri/card12
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -1023
drmOpenDevice: node name is /dev/dri/card13
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -1023
drmOpenDevice: node name is /dev/dri/card14
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -1023
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 5, (OK)
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 5, (OK)
drmGetBusid returned ''
(II) fglrx(0): [drm] DRM interface version 1.0
(II) fglrx(0): [drm] created "fglrx" driver at busid "PCI:1:0:0"
(II) fglrx(0): [drm] added 8192 byte SAREA at 0xf8981000
(II) fglrx(0): [drm] mapped SAREA 0xf8981000 to 0xb7d24000
(II) fglrx(0): [drm] framebuffer handle = 0xe0000000
(II) fglrx(0): [drm] added 1 reserved context for kernel
(II) fglrx(0): DRIScreenInit done
(II) fglrx(0): Kernel Module Version Information:
(II) fglrx(0): Name: fglrx
(II) fglrx(0): Version: 8.12.10
(II) fglrx(0): Date: Apr 4 2005
(II) fglrx(0): Desc: ATI FireGL DRM kernel module
(II) fglrx(0): Kernel Module version matches driver.
(II) fglrx(0): Kernel Module Build Time Information:
(II) fglrx(0): Build-Kernel UTS_RELEASE: 2.6.11-gentoo-r5
(II) fglrx(0): Build-Kernel MODVERSIONS: no
(II) fglrx(0): Build-Kernel __SMP__: no
(II) fglrx(0): Build-Kernel PAGE_SIZE: 0x1000
(II) fglrx(0): [drm] register handle = 0xf1010000
(EE) fglrx(0): [agp] unable to acquire AGP, error "xf86_ENOMEM"
(EE) fglrx(0): cannot init AGP
(II) fglrx(0): [drm] removed 1 reserved context for kernel
(II) fglrx(0): [drm] unmapping 8192 bytes of SAREA 0xf8981000 at 0xb7d24000
(WW) fglrx(0): ***********************************************
(WW) fglrx(0): * DRI initialization failed! *
(WW) fglrx(0): * (maybe driver kernel module missing or bad) *
(WW) fglrx(0): * 2D acceleraton available (MMIO) *
(WW) fglrx(0): * no 3D acceleration available *
(WW) fglrx(0): ********************************************* *
(II) fglrx(0): FBADPhys: 0xe0000000 FBMappedSize: 0x08000000
(II) fglrx(0): FBMM initialized for area (0,0)-(1280,8191)
(II) fglrx(0): FBMM auto alloc for area (0,0)-(1280,1024) (front color buffer - assumption)
(==) fglrx(0): Backing store disabled
(==) fglrx(0): Silken mouse enabled
(II) fglrx(0): Using hardware cursor (scanline 1024)
(II) fglrx(0): Largest offscreen area available: 1280 x 7163
(**) Option "dpms"
(**) fglrx(0): DPMS enabled
(II) fglrx(0): Using XFree86 Acceleration Architecture (XAA)
Screen to screen bit blits
Solid filled rectangles
Solid Horizontal and Vertical Lines
Offscreen Pixmaps
Setting up tile and stipple cache:
32 128x128 slots
32 256x256 slots
16 512x512 slots
(II) fglrx(0): Acceleration enabled
(II) fglrx(0): Direct rendering disabled
(**) fglrx(0): Video overlay enabled on CRTC1
(II) Loading extension FGLRXEXTENSION
(II) Loading extension ATITVOUT
(==) RandR enabled
(II) Setting vga for screen 0.
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension LBX
(II) Initializing built-in extension XC-APPGROUP
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension XFree86-Bigfont
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) Initializing built-in extension XEVIE
(**) Option "Protocol" "IMPS/2"
(**) Mouse1: Device: "/dev/input/mice"
(**) Mouse1: Protocol: "IMPS/2"
(**) Option "CorePointer"
(**) Mouse1: Core Pointer
(**) Option "Device" "/dev/input/mice"
(**) Option "Emulate3Buttons"
(**) Mouse1: Emulate3Buttons, Emulate3Timeout: 50
(**) Option "ZAxisMapping" "4 5"
(**) Mouse1: ZAxisMapping: buttons 4 and 5
(**) Mouse1: Buttons: 5
(**) Mouse1: SmartScroll: 1
(**) Option "CoreKeyboard"
(**) Keyboard1: Core Keyboard
(**) Option "Protocol" "standard"
(**) Keyboard1: Protocol: standard
(**) Option "AutoRepeat" "500 30"
(**) Option "XkbRules" "xfree86"
(**) Keyboard1: XkbRules: "xfree86"
(**) Option "XkbModel" "pc101"
(**) Keyboard1: XkbModel: "pc101"
(**) Option "XkbLayout" "us"
(**) Keyboard1: XkbLayout: "us"
(**) Option "CustomKeycodes" "off"
(**) Keyboard1: CustomKeycodes disabled
(II) XINPUT: Adding extended input device "Keyboard1" (type: KEYBOARD)
(II) XINPUT: Adding extended input device "Mouse1" (type: MOUSE)
(II) Mouse1: ps2EnableDataReporting: succeeded
Could not init font path element /usr/X11R6/lib/X11/fonts/local/, removing from list!
SetClientVersion: 0 8

[Wedge_]

The log doesn't really show much extra information for this particular problem. How high have you set your AGP aperture size? Have you tried the 8.10.19 driver version? I think some people have had problems with this version and have had to downgrade.

[mvc]

hi,

Appending "vmalloc=128M" to the bootloader didn't make any change apparently. Is there anything else I could try?

Code: Select all

fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
[fglrx] Maximum main memory to use for locked dma buffers: 802 MBytes.
ACPI: PCI interrupt 0000:01:05.0[A] -> GSI 16 (level, low) -> IRQ 16
[fglrx] module loaded - fglrx 8.12.10 [Apr  4 2005] on minor 0
allocation failed: out of vmalloc space - use vmalloc=<size> to increase size.
[fglrx] Internal AGP support requested, but kernel AGP support active.
[fglrx] Have to use kernel AGP support to avoid conflicts.
[fglrx] AGP detected, AgpState   = 0x1f00021b (hardware caps of chipset)
agpgart: Found an AGP 3.0 compliant device at 0000:00:00.0.
agpgart: Putting AGP V3 device at 0000:00:00.0 into 8x mode
agpgart: Putting AGP V3 device at 0000:01:05.0 into 8x mode
[fglrx] AGP enabled,  AgpCommand = 0x1f000312 (selected caps)
[fglrx] free  AGP = 21245952
[fglrx] max   AGP = 21245952
[fglrx] free  LFB = 116387840
[fglrx] max   LFB = 116387840
[fglrx] free  Inv = 0
[fglrx] max   Inv = 0
[fglrx] total Inv = 0
[fglrx] total TIM = 0
[fglrx] total FB  = 0
[fglrx] total AGP = 8192

thanks
marco

[nomaam]

The log doesn't really show much extra information for this particular problem. How high have you set your AGP aperture size? Have you tried the 8.10.19 driver version? I think some people have had problems with this version and have had to downgrade.

Wegde_: Thank you for your review of the log.

I increased aperture from 128 to 256. I will also try 512 over the weekend.

I will try to downgrade to 8.10.19 also, but I have to say I am not that familiar with the process of version control yet. Is there a link I can go to to learn that? I would think that there are settings in the package.keywords I would have to set, true?

I am beginning to suspect that there may be an issue with the fact that I use an nforce3 250 chipset, which is to support a 64-bit processor. I bought the Neo2 board for it's superior I/O connectivity, not the fact that it's 64-bit. In fact, I have been trying to run gentoo in pure 32-bit mode to try to not have compatibility problems in running 32-bit emulation. I am now thinking that the 32-bit nvidia_agp driver may not be tested with my nforce3 hardware.

Final thought: in your FAQ, you state:

NB: AMD64 users: you must also select the AMD Opteron/Athlon64 on-CPU GART support option in addition to those described above.

is this possible or desired in a 32-bit install?

Thanks again, John

[PaveQ]

My agpgart and nvidia_agp is compiled in the kernel, and dmesg shows the agp port and the card recognized just fine. fglrx also loads fine. Has anyone made 3D acceleration work with a nForce3 250 with agpgart and nvidia_agp configured in the kernel in 32-bit?

What you might want to try is compiling the AGP support as modules rather than compiling it into the kernel. This can sometimes be the difference between things working and not working.

Thanks, Wedge. I'll try it.

Should I compile both agpgart and nvidia_agp as modules? Does it make any sense to compile agpgart in the kernel and nvidia_agp as a module?

The usual thing to do is make both modules. Remember to load them before the fglrx module.

How do I know what AGP speed my card is running? Should be 4x.

Normally, you have to enable the "qt" USE flag and emerge ati-drivers-extra, then run fireglcontrol. That program should display the current AGP mode. However, that's a bit of a pain if you don't use QT normally (like me), so I mutilated the source code for fireglcontrol a bit and made a console version which just displays the AGP mode. It seems to work for me, so if you want to try it go ahead Download this archive, extract it, cd to fgl_agp, run "make", then "./fgl_agp". X has to be running for it to work properly.

I have QT merge allready. Tried to merge ati-drivers-extra, but it wanted to merge old ati-drivers. Seems like I have to wait new version from ati-drivers-extra to come up.

[Wedge_]

Appending "vmalloc=128M" to the bootloader didn't make any change apparently. Is there anything else I could try?

Try a higher value, like 192 or 256.

I will try to downgrade to 8.10.19 also, but I have to say I am not that familiar with the process of version control yet. Is there a link I can go to to learn that? I would think that there are settings in the package.keywords I would have to set, true?

It's pretty simple in this situation. To downgrade, make sure X isn't running, then do

Code: Select all

rmmod fglrx && emerge -C ati-drivers && emerge \<ati-drivers-8.12.10 && modprobe fglrx

That will unload the old fglrx module, remove the current driver version, emerge the latest version below 8.12.10, then load the newly compiled module. After that you should be able to start X again. If this does fix your problem, you should add the line

Code: Select all

=media-video/ati-drivers-8.12.10

to your /etc/portage/package.mask. This should prevent portage trying to emerge the 8.12.10 version again.

NB: AMD64 users: you must also select the AMD Opteron/Athlon64 on-CPU GART support option in addition to those described above.

is this possible or desired in a 32-bit install?

I'm not too sure of the 64-bit stuff since I don't have a 64-bit box myself, but I think if you have an AMD64 processor you should have that option enabled.

I have QT merge allready. Tried to merge ati-drivers-extra, but it wanted to merge old ati-drivers. Seems like I have to wait new version from ati-drivers-extra to come up.

Try the little program I posted then

[enigma_0Z]

Hey all! I just found out that the 8.12.10 drivers are out! Does anyone know if they support composite yet???

[Wedge_]

They don't appear to have changed from 8.10.19 with respect to Composite. Enabling it will still disable 3D acceleration.

[mvc]

Thanks Wedge_, passing vmalloc=256M to the kernel did stop the vmalloc message from appearing, but unfortunately it still hangs my system when I run glxgears, and now without even displaying the black window .

Also I still have those

Code: Select all

[fglrx] Internal AGP support requested, but kernel AGP support active.
[fglrx] Have to use kernel AGP support to avoid conflicts.

in kernel log, and I cannot understand why it says that I have AGP support active since I know for sure that it is compiled as modules:

Code: Select all

marco@ravel marco $ lsmod
Module                  Size  Used by
fglrx                 235932  7
uhci_hcd               30348  0
ehci_hcd               41348  0
snd_atiixp_modem       13732  1
ohci_hcd               32264  0
ati_agp                 6796  1
agpgart                28204  2 ati_agp
snd_atiixp             16548  3
snd_ac97_codec         71904  2 snd_atiixp_modem,snd_atiixp
ndiswrapper           104356  0

could this be the cause for the system hard lock?

thanks
marco

[Wedge_]

Do you have "UseInternalAGPGART" set to "yes" in your xorg.conf? When using the kernel AGP modules it should be "no".

[mvc]

I want to use the internal AGP, and so I have

Option "UseInternalAGPGART" "yes"

in xorg.conf. I also compiled kernel AGP as modules, since not doing so produces an error message when I load the ati drivers. Are you saying that I must not build the kernel AGP modules? I thought that the fact of having the modules around didn't make a difference, since they are loaded only when they are needed.

thanks!
Marco

[Wedge_]

I want to use the internal AGP

OK, but you should try both - sometimes things will only work in one configuration.

Are you saying that I must not build the kernel AGP modules? I thought that the fact of having the modules around didn't make a difference, since they are loaded only when they are needed.

You should be able to use the internal AGP support if the kernel AGP modules are not loaded. Your dmesg output indicates that the driver tries to use the internal AGP support but fails because the kernel AGP support is active (ie the modules are loaded). If you're autoloading the agpgart and ati-agp modules, disable that and just load the fglrx module.

[enigma_0Z]

I read on ATI's website that the 2.6.* kernels need a separate module for the agp to function properly... for me it would be the via-agp module... is this right? Would this resolve some of my seemingly random problems?

[powerman]

Is it ever possible to have TV-out working on hardened system?

I've Radeon9800pro and use xorg-x11-6.8.2-r1 & ati-drivers-8.10.19. Everything works fine until I switched to hardened. Now I can use Xorg only with it own "radeon" driver... it's nice, but I need TV-out.

Is it possible to get TV-out working using "radeon" driver or is it possible to get ati-drivers working in hardened environment? Here is my log (I sure you all already see this many times):

Code: Select all

Required symbol vgaHWFreeHWRec from module /usr/X11R6/lib/modules/drivers/fglrx_drv.o is unresolved!
Required symbol vgaHWGetHWRec from module /usr/X11R6/lib/modules/drivers/fglrx_drv.o is unresolved!
Symbol xf86CreateI2CBusRec from module /usr/X11R6/lib/modules/drivers/fglrx_drv.o is unresolved!
Symbol xf86I2CBusInit from module /usr/X11R6/lib/modules/drivers/fglrx_drv.o is unresolved!
Symbol xf86InitInt10 from module /usr/X11R6/lib/modules/drivers/fglrx_drv.o is unresolved!
Symbol xf86FreeInt10 from module /usr/X11R6/lib/modules/drivers/fglrx_drv.o is unresolved!
Symbol fbPictureInit from module /usr/X11R6/lib/modules/drivers/fglrx_drv.o is unresolved!
Symbol vgaHWGetIndex from module /usr/X11R6/lib/modules/drivers/fglrx_drv.o is unresolved!
Required symbol vgaHWUnlock from module /usr/X11R6/lib/modules/drivers/fglrx_drv.o is unresolved!
Required symbol vgaHWSave from module /usr/X11R6/lib/modules/drivers/fglrx_drv.o is unresolved!
Required symbol vgaHWLock from module /usr/X11R6/lib/modules/drivers/fglrx_drv.o is unresolved!
Required symbol drmUnmap from module /usr/X11R6/lib/modules/drivers/fglrx_drv.o is unresolved!
Symbol drmUnmap from module /usr/X11R6/lib/modules/drivers/fglrx_drv.o is unresolved!
Required symbol vgaHWFreeHWRec from module /usr/X11R6/lib/modules/drivers/fglrx_drv.o is unresolved!
Symbol vgaHWGetIndex from module /usr/X11R6/lib/modules/drivers/fglrx_drv.o is unresolved!
Required symbol vgaHWUnlock from module /usr/X11R6/lib/modules/drivers/fglrx_drv.o is unresolved!
Required symbol vgaHWRestore from module /usr/X11R6/lib/modules/drivers/fglrx_drv.o is unresolved!
Required symbol vgaHWLock from module /usr/X11R6/lib/modules/drivers/fglrx_drv.o is unresolved!
Symbol vgaHWGetIndex from module /usr/X11R6/lib/modules/drivers/fglrx_drv.o is unresolved!
Required symbol vgaHWUnlock from module /usr/X11R6/lib/modules/drivers/fglrx_drv.o is unresolved!
Required symbol vgaHWRestore from module /usr/X11R6/lib/modules/drivers/fglrx_drv.o is unresolved!
Required symbol drmMap from module /usr/X11R6/lib/modules/drivers/fglrx_drv.o is unresolved!
Symbol drmMap from module /usr/X11R6/lib/modules/drivers/fglrx_drv.o is unresolved!
Symbol firegl_CheckMagic from module /usr/X11R6/lib/modules/drivers/fglrx_drv.o is unresolved!
Symbol xf86PrintEDID from module /usr/X11R6/lib/modules/drivers/fglrx_drv.o is unresolved!
Symbol xf86PrintEDID from module /usr/X11R6/lib/modules/drivers/fglrx_drv.o is unresolved!
Symbol xf86PrintEDID from module /usr/X11R6/lib/modules/drivers/fglrx_drv.o is unresolved!
Symbol xf86DoEDID_DDC2 from module /usr/X11R6/lib/modules/drivers/fglrx_drv.o is unresolved!
Required symbol drmAddMap from module /usr/X11R6/lib/modules/drivers/fglrx_drv.o is unresolved!
Symbol firegl_QueryHwCaps from module /usr/X11R6/lib/modules/drivers/fglrx_drv.o is unresolved!
Symbol DRIGetDeviceInfo from module /usr/X11R6/lib/modules/drivers/fglrx_drv.o is unresolved!
Symbol firegl_AllocMemBufferFromTop from module /usr/X11R6/lib/modules/drivers/fglrx_drv.o is unresolved!
Symbol firegl_AllocMemBufferFromTop from module /usr/X11R6/lib/modules/drivers/fglrx_drv.o is unresolved!
Symbol firegl_GetMemInfo from module /usr/X11R6/lib/modules/drivers/fglrx_drv.o is unresolved!
Required symbol drmMap from module /usr/X11R6/lib/modules/drivers/fglrx_drv.o is unresolved!
Symbol drmMap from module /usr/X11R6/lib/modules/drivers/fglrx_drv.o is unresolved!
Symbol firegl_AllocCache from module /usr/X11R6/lib/modules/drivers/fglrx_drv.o is unresolved!
Symbol firegl_AllocCache from module /usr/X11R6/lib/modules/drivers/fglrx_drv.o is unresolved!
Required symbol drmAddMap from module /usr/X11R6/lib/modules/drivers/fglrx_drv.o is unresolved!
Symbol firegl_InitPCIe from module /usr/X11R6/lib/modules/drivers/fglrx_drv.o is unresolved!
Symbol firegl_FreePCIe from module /usr/X11R6/lib/modules/drivers/fglrx_drv.o is unresolved!
Required symbol drmUnmap from module /usr/X11R6/lib/modules/drivers/fglrx_drv.o is unresolved!
Symbol drmUnmap from module /usr/X11R6/lib/modules/drivers/fglrx_drv.o is unresolved!
Required symbol drmUnmap from module /usr/X11R6/lib/modules/drivers/fglrx_drv.o is unresolved!
Symbol drmUnmap from module /usr/X11R6/lib/modules/drivers/fglrx_drv.o is unresolved!
Required symbol drmAddMap from module /usr/X11R6/lib/modules/drivers/fglrx_drv.o is unresolved!
Required symbol drmMap from module /usr/X11R6/lib/modules/drivers/fglrx_drv.o is unresolved!
Symbol drmMap from module /usr/X11R6/lib/modules/drivers/fglrx_drv.o is unresolved!
Required symbol drmUnmap from module /usr/X11R6/lib/modules/drivers/fglrx_drv.o is unresolved!
Symbol drmUnmap from module /usr/X11R6/lib/modules/drivers/fglrx_drv.o is unresolved!
Required symbol drmUnmap from module /usr/X11R6/lib/modules/drivers/fglrx_drv.o is unresolved!
Symbol drmUnmap from module /usr/X11R6/lib/modules/drivers/fglrx_drv.o is unresolved!
Required symbol drmAddMap from module /usr/X11R6/lib/modules/drivers/fglrx_drv.o is unresolved!
Required symbol drmMap from module /usr/X11R6/lib/modules/drivers/fglrx_drv.o is unresolved!
Symbol drmMap from module /usr/X11R6/lib/modules/drivers/fglrx_drv.o is unresolved!
Required symbol drmUnmap from module /usr/X11R6/lib/modules/drivers/fglrx_drv.o is unresolved!
Symbol drmUnmap from module /usr/X11R6/lib/modules/drivers/fglrx_drv.o is unresolved!
Symbol firegl_AGPAcquire from module /usr/X11R6/lib/modules/drivers/fglrx_drv.o is unresolved!
Symbol drmAgpGetMode from module /usr/X11R6/lib/modules/drivers/fglrx_drv.o is unresolved!
Symbol drmAgpVendorId from module /usr/X11R6/lib/modules/drivers/fglrx_drv.o is unresolved!
Symbol drmAgpDeviceId from module /usr/X11R6/lib/modules/drivers/fglrx_drv.o is unresolved!
Symbol drmAgpRelease from module /usr/X11R6/lib/modules/drivers/fglrx_drv.o is unresolved!
Symbol drmAgpEnable from module /usr/X11R6/lib/modules/drivers/fglrx_drv.o is unresolved!
Symbol drmAgpSize from module /usr/X11R6/lib/modules/drivers/fglrx_drv.o is unresolved!
Symbol drmAgpBase from module /usr/X11R6/lib/modules/drivers/fglrx_drv.o is unresolved!
Symbol DRIGetDrawableInfo from module /usr/X11R6/lib/modules/drivers/fglrx_drv.o is unresolved!
Required symbol __glXActiveScreens from module /usr/X11R6/lib/modules/drivers/fglrx_drv.o is unresolved!
Symbol __glXActiveScreens from module /usr/X11R6/lib/modules/drivers/fglrx_drv.o is unresolved!
Symbol XAAGetScreenIndex from module /usr/X11R6/lib/modules/drivers/fglrx_drv.o is unresolved!
Symbol XAAGetScreenIndex from module /usr/X11R6/lib/modules/drivers/fglrx_drv.o is unresolved!
Symbol XAAGetScreenIndex from module /usr/X11R6/lib/modules/drivers/fglrx_drv.o is unresolved!
Symbol XAAGetScreenIndex from module /usr/X11R6/lib/modules/drivers/fglrx_drv.o is unresolved!
Symbol XAAGetScreenIndex from module /usr/X11R6/lib/modules/drivers/fglrx_drv.o is unresolved!
Symbol XAAGetPixmapIndex from module /usr/X11R6/lib/modules/drivers/fglrx_drv.o is unresolved!
Symbol fbGetWinPrivateIndex from module /usr/X11R6/lib/modules/drivers/fglrx_drv.o is unresolved!
Symbol XAAGetPixmapIndex from module /usr/X11R6/lib/modules/drivers/fglrx_drv.o is unresolved!
Symbol XAACheckTileReducibility from module /usr/X11R6/lib/modules/drivers/fglrx_drv.o is unresolved!
Symbol fbGetWinPrivateIndex from module /usr/X11R6/lib/modules/drivers/fglrx_drv.o is unresolved!

Fatal server error:
Some required symbols were unresolved

If only way to get TV-out is compile Xorg and/or ati-drivers without hardened, then can you please give me example command how I can do this? I mean, is I need to just switch off "hardened" and "dlloader" USE-flags for xorg-x11, or is I should switch gcc to vanilla profile and recompile xorg-x11 and ati-drivers (and maybe kernel too?)... and if right way is switch gcc profile then how I can assure next time I run emerge -uDav world it will compile everything with hardened gcc but xorg&ati-drivers with vanilla gcc?

[Sith_Happens]

Did you create your xorg.conf using fglrxconfig? I had this same problem with unresolved symbols, and recreating my xorg.conf with the latest version of fglrxconfig fixed it.

[powerman]

Did you create your xorg.conf using fglrxconfig? I had this same problem with unresolved symbols, and recreating my xorg.conf with the latest version of fglrxconfig fixed it.

No, I use my older xorg.conf which works fine with same version of Xorg and ati-drivers until switching to hardened toolchain. But I've just try to recreate xorg.conf with fglrxconfig and this don't help - still unresolved symbols.

[MickKi]

Hi All,

Would anyone know what's the correct module to compile for an Intel 915G chipset? This is what lspci shows:

Code: Select all

0000:00:01.0 PCI bridge: Intel Corporation 915G/P/GV/GL/PL/910GL PCI Express Root Port (rev 04) (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 0000c000-0000cfff
Memory behind bridge: cfe00000-cfefffff
Prefetchable memory behind bridge: d0000000-dfffffff
Expansion ROM at 0000c000 [disabled] [size=4K]
Capabilities: [88] #0d [0000]
Capabilities: [80] Power Management version 2
Capabilities: [90] Message Signalled Interrupts: 64bit- Queue=0/0 Enable-
Capabilities: [a0] #10 [0141]

I have compiled and installed the intel-agp module but my Radeon X600 RV380 card is not recognised:

Code: Select all

0000:01:00.0 VGA compatible controller: ATI Technologies Inc RV380 0x3e50 [Radeon X600] (prog-if 00 [VGA])
Subsystem: ASUSTeK Computer Inc.: Unknown device 0328
Flags: bus master, fast devsel, latency 0, IRQ 16
Memory at d0000000 (32-bit, prefetchable) [size=cfec0000]
I/O ports at c000 [size=256]
Memory at cfee0000 (32-bit, non-prefetchable) [size=64K]
Expansion ROM at 00020000 [disabled]
Capabilities: [50] Power Management version 2
Capabilities: [58] #10 [0001]

0000:01:00.1 Display controller: ATI Technologies Inc RV380 [Radeon X600] Secondary
Subsystem: ASUSTeK Computer Inc.: Unknown device 0329
Flags: bus master, fast devsel, latency 0
Memory at cfef0000 (32-bit, non-prefetchable)
Capabilities: [50] Power Management version 2
Capabilities: [58] #10 [0001]

I can get X to run but the whole thing is rather unstable, i.e. resizing an xterm or launching links -g and trying to scroll using the mouse (wheel or just dragging the scrollbar) always results in the kernel going AWAL. I have to pull the plug every time because Ctrl+Alt+Del does not work, nor does Alt+SysRq+k.

The Xorg.o.log shows:

Code: Select all

(II) Primary Device is: PCI 01:00:0
(WW) fglrx: No matching Device section for instance (BusID PCI:1:0:1) found
(--) Chipset RADEON X600 (RV380 3E50) found
  *
  *
  *
(**) fglrx(0): Option "mtrr" "off"

The dmesg shows:

Code: Select all

mtrr: base(0xd0000000) is not aligned on a size(0x7ff0000) boundary
[fglrx:firegl_addmap] *ERROR* mtrr allocation failed (-22)
allocation failed: out of vmalloc space - use vmalloc=<size> to increase size.
[fglrx] free  PCIe = 54804480
[fglrx] max   PCIe = 54804480
[fglrx] free  LFB = 122613760
[fglrx] max   LFB = 122613760
[fglrx] free  Inv = 134217728
[fglrx] max   Inv = 134217728
[fglrx] total Inv = 134217728
[fglrx] total TIM = 0
[fglrx] total FB  = 0
[fglrx] total PCIe = 16384

I have mtrr built in the kernel - is that a problem?

Any suggestions?

PS. The Radeon X600 came as part of the new box: Compaq Pressario SR1180uk Intel P4 3.4G.

[nomaam]

I will try to downgrade to 8.10.19 also, but I have to say I am not that familiar with the process of version control yet. Is there a link I can go to to learn that? I would think that there are settings in the package.keywords I would have to set, true?

It's pretty simple in this situation. To downgrade, make sure X isn't running, then do

Code: Select all

rmmod fglrx && emerge -C ati-drivers && emerge \<ati-drivers-8.12.10 && modprobe fglrx

That will unload the old fglrx module, remove the current driver version, emerge the latest version below 8.12.10, then load the newly compiled module. After that you should be able to start X again. If this does fix your problem, you should add the line

Code: Select all

=media-video/ati-drivers-8.12.10

to your /etc/portage/package.mask. This should prevent portage trying to emerge the 8.12.10 version again.

NB: AMD64 users: you must also select the AMD Opteron/Athlon64 on-CPU GART support option in addition to those described above.

is this possible or desired in a 32-bit install?

I'm not too sure of the 64-bit stuff since I don't have a 64-bit box myself, but I think if you have an AMD64 processor you should have that option enabled.

Wedge,

Decided to try a 64-bit install. All video acceleration now works great. The 32-bit solutions were getting harder than doing a 64-bit install. Thanks for your help

[Wedge_]

Wedge,

Decided to try a 64-bit install. All video acceleration now works great. The 32-bit solutions were getting harder than doing a 64-bit install. Thanks for your help

Dodgy 32-bit systems, always causing problems

[MickKi]

Any ideas why my card is not recognised - as per two posts ago?

Could that have something to do with X and the kernel crashing?

Any advice much appreciated!

[bagel]

Hi there;

I know that the Ati driver problems have already been heavily discussed, but I can't seem to find a solution that is transferable to my system, especially since it's behaviour strongly confuses me.

My System:
Gentoo (logically (-; - but I had the same problem already under Debian Sarge)
Sony Vaio PCG-K215Z (ATI Mobility Radeon 9200)
Xorg (6.8.2-r1)


Problem:
I use the 2.6.11 Gentoo Vanilla Sources. Using this sources, I compiled two Kernels.
One that fulfils the expactations of the fglrx-driver perfectly, and one who is not that perfect.
(the NOT ideal one does only have "agpgart" and "fglrx" but no "ati-agp" module")
If I boot the Kernel without ati-agp, X is starting nicely, however fglrxinfo tells me that Mesa is in use. (I have done open-gl update)

If I boot the "ideal" Kernel, and load(in that order): "agpgart" "ati-agp and "fglrx" and finally X start, it seems as if the X-Server was booting normally but the screen stays black. The system then does not react on keyboard input and the fan is running wild.

If log in through ssh, top tells me that X is consuming 9% of Cpu. I can only end this Condition through manual shutdown(shutdown now -h doesn't do anything).

The log of the fauled boot never contains any Error messages, dmesg(before starting X) also is error-free.
I already played around with UseInternalAGPGart and MonitorLayout.

Oh, and finally, i use the ati-agp because lspci tells:

Code: Select all

0000:00:00.0 Host bridge: ATI Technologies Inc RS200/RS200M AGP Bridge [IGP 340M] (rev 02)
0000:00:01.0 PCI bridge: ATI Technologies Inc PCI Bridge [IGP 340M]

I hope that someone can help me,

[bagel]

Update (-;
I think I'm coming closer to the solution..

When I do a "modprobe ati-agp" it autodetects my card as a "IGP-345M" while in reality it is a Ati Mobility Radeon 9200.

Does anyone have a clue how a I can tell the module which card I'm using?

Greeting, Thanks in Advance

[Syntax-Error]

Hello guys

I hope to find an answer to my troubles
I managed to make Xserver work flawlessly with DRI and all that things
When I reboot and start again X I can only hear my KDE starting, but my monitor says that no signal are detected resultind in a complete black screen
I checked with

dmsg | less
cat /var/log/Xorg.log.0 | grep EE
cat /var/log/Xorg.log.0 | grep WW

no errors
and no warning differ from the previous one with a working Xserver
to fix that I usually type a serie of command :

modules-update
opengl-update ati
env-update
source /etc/profile

then I must reboot to the thing work

sometimes I have to re-emerge ati-drivers
and more seldom nothing seems to works

Then after x reboot this malfunction come out again

If some one got a clue on this trouble, I would be gratefull