[solved] No numpad?

Message

zieloo · Post by **zieloo** » Mon Apr 04, 2005 6:18 pm

Well I have this weird problem taht my numpad is not working, without any reason, doesn't matter which num-hey I press, it misteriously shouws nothing. My xorg.xonf is as follows:

Code: Select all


Section "Module"

    Load        "dbe"  	# Double buffer extension
    Load        "type1"
    Load        "speedo"
    Load        "freetype"
    Load        "xtt"
    Load        "dri"
    Load	"GLcore"
    Load	"glx"
    
   Load  "extmod"
   Load  "fbdevhw"

EndSection

Section "Extensions"
    Option "Composite" "Enable"
EndSection


# **********************************************************************
# Files section.  This allows default font and rgb paths to be set
# **********************************************************************

Section "Files"

    RgbPath	"/usr/X11R6/lib/X11/rgb"

    FontPath   "/usr/share/fonts/misc/"
    FontPath   "/usr/share/fonts/TTF/"
    FontPath   "/usr/share/fonts/Type1/"
    FontPath   "/usr/share/fonts/CID/"
    FontPath   "/usr/share/fonts/75dpi/"
    FontPath   "/usr/share/fonts/100dpi/"
    FontPath   "/usr/share/fonts/local/"
    FontPath   "/usr/share/fonts/Speedo/"
#    FontPath   "/usr/share/fonts/TrueType/"
    FontPath   "/usr/share/fonts/freefont/"

# The module search path.  The default path is shown here.

#    ModulePath "/usr/X11R6/lib/modules"

EndSection

# **********************************************************************
# Server flags section.
# **********************************************************************

Section "ServerFlags"

EndSection

# **********************************************************************
# Input devices
# **********************************************************************

# **********************************************************************
# Core keyboard's InputDevice section
# **********************************************************************

Section "InputDevice"

    Identifier	"Keyboard1"
    Driver	"kbd"

    Option "AutoRepeat" "500 30"

    Option "XkbRules"	"xorg"
    Option "XkbModel"	"pc105"
    Option "XkbLayout"	"pl"

EndSection


# **********************************************************************
# Core Pointer's InputDevice section
# **********************************************************************

Section "InputDevice"

# Identifier and driver

	Identifier "Mouse1"
	Driver	"mouse"
	Option "CorePointer" 
	Option "Protocol" "IMPS/2" 
	Option "Device"      "/dev/psaux"
	Option "ZAxisMapping" "4 5"
    #Option "Emulate3Buttons" "no"
    #Option "Buttons" "3" 

# Mouse-speed setting for PS/2 mouse.

#    Option "Resolution"	"256"

# When using XQUEUE, comment out the above two lines, and uncomment
# the following line.

#    Option "Protocol"	"Xqueue"

# Baudrate and SampleRate are only for some Logitech mice. In
# almost every case these lines should be omitted.

#    Option "BaudRate"	"9600"
#    Option "SampleRate"	"150"

# Emulate3Buttons is an option for 2-button Microsoft mice
# Emulate3Timeout is the timeout in milliseconds (default is 50ms)

    Option "Emulate3Buttons"
#    Option "Emulate3Timeout"    "50"

# ChordMiddle is an option for some 3-button Logitech mice

#    Option "ChordMiddle"

EndSection


# **********************************************************************
# Monitor section
# **********************************************************************

# Any number of monitor sections may be present

Section "Monitor"

    Identifier  "monitor"

# HorizSync is in kHz unless units are specified.
# HorizSync may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY.  REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.

    HorizSync   30 - 85
    VertRefresh 50-120

EndSection


# **********************************************************************
# Graphics device section
# **********************************************************************

# Any number of graphics device sections may be present

# Standard VGA Device:

Section "Device"
    Identifier	"Standard VGA"
    VendorName	"Unknown"
    BoardName	"Unknown"
Chipset	"i810"

    Driver     "i810"

EndSection

# Device configured by xorgconfig:

Section "Device"
	Identifier  "video"
	Driver      "i810"
	VideoRam    32768
EndSection


# **********************************************************************
# Screen sections
# **********************************************************************

Section "Screen"
    Identifier  "Screen 1"
    Device      "video"
    Monitor     "monitor"
    DefaultDepth 24

	SubSection "Display"
		Depth     24
		Modes    "1024x768" 
		ViewPort  0 0
	EndSubSection
        SubSection "Display"
		Depth      8 
		Modes	  "1024x768" 
		ViewPort  0 0
	EndSubSection
EndSection

# **********************************************************************
# ServerLayout sections.
# **********************************************************************

Section "ServerLayout"

# The Identifier line must be present
    Identifier  "Simple Layout"

    Screen "Screen 1"

    InputDevice "Mouse1" "CorePointer"
    InputDevice "Keyboard1" "CoreKeyboard"

EndSection

Section "dri"
	Group        0
	Mode         0666
EndSection

I removed the comments to make stuff more clear.

I really didn't have time to look into this issue, but having tha numpad disabled is extremely annoying. i would appreciate any help.

madbiker · Post by **madbiker** » Mon Apr 04, 2005 6:43 pm

Well I have to ask, is numlock on? X turns it off by default.

zieloo · Post by **zieloo** » Mon Apr 04, 2005 7:16 pm

madbiker wrote:Well I have to ask, is numlock on? X turns it off by default.

I'm not that blind:P For sure it's on but it has no effect, whatever I do with it. I use kde-3.4 now - maybe sth cuz of it?

zieloo · Post by **zieloo** » Sun Apr 10, 2005 8:08 pm

It's only in KDE, where the problem occurs.
Anyone had come across sth like that?

rjmckee · Post by **rjmckee** » Fri Apr 29, 2005 7:36 pm

I have the same problem. Been googling to no avail.
Numpad inop in in KDE 3.4 but OK in xfce4.

zieloo · Post by **zieloo** » Tue May 03, 2005 12:30 pm

rjmckee wrote:I have the same problem. Been googling to no avail.
Numpad inop in in KDE 3.4 but OK in xfce4.

Happens in kde-3.4 only and only on some of the account, so it's related to the configuration. Removing ~/.kde should help but haven't tried yet.

allucid · Post by **allucid** » Tue May 03, 2005 2:56 pm

Shift+NumLock toggles the ability to move the mouse cursor with the numpad. Maybe you hit that by accident.

zieloo · Post by **zieloo** » Tue May 03, 2005 7:42 pm

allucid wrote:Shift+NumLock toggles the ability to move the mouse cursor with the numpad. Maybe you hit that by accident.

No comments...

rjmckee · Post by **rjmckee** » Tue May 03, 2005 8:58 pm

In my case many permutations of keys do not affect KDE+numpad.
In the interim I am using Gnome. Numpad OK there.....

pops45042 · Post by **pops45042** » Fri Nov 11, 2005 3:59 am

Shift+NumLock toggles the ability to move the mouse cursor with the numpad. Maybe you hit that by accident.

Thanks, this solved it for me too. I kept messing with numlock, looking through KDE settings, cussing, couldn;t figure it out till now.

Paul

calr0x · Post by **calr0x** » Sun Dec 18, 2005 11:18 pm

Boy this one helped me too...

feld · Post by **feld** » Fri Feb 10, 2006 7:35 pm

omg STICKY THIS lol

-Feld

[solved] No numpad?

[solved] No numpad?

Numpad inop in in KDE 3.4 but OK in xfce4

Re: Numpad inop in in KDE 3.4 but OK in xfce4

no numpad