2005.0 and multilib

[jpalko]

Just to check, should I have multilib defined into USE flags on 2005.0?

I followed the Updating to 2005.0 (multilib) instruction to change to 2005.0 from 2004.3 and after it finished, my glibc is:

Code: Select all

# equery u glibc
[ Searching for packages matching glibc... ]
[ Colour Code : set unset ]
[ Legend    : Left column  (U) - USE flags from make.conf              ]
[           : Right column (I) - USE flags packages was installed with ]
[ Found these USE variables for sys-libs/glibc-2.3.4.20041102-r1 ]
 U I
 + + nls           : <unknown>
 - - pic           : Build Position Independent Code. Needed for prelink or the hardened toolchain
 - - build         : !!internal use only!! DO NOT SET THIS FLAG YOURSELF!, used for creating build images and the first half of bootstrapping.
 + + nptl          : Enable support for Native POSIX Threads Library, the new threading module (requires linux-2.6 or better usually)
 - - nptlonly      : Disables building the linuxthreads fallback in glibc ebuilds that support building both linuxthreads and nptl.
 - - erandom       : Enable erandom/frandom support in glibc for ssp
 - - hardened      : activate default security enhancements for toolchain (gcc, glibc, binutils)
 - - multilib      : On 64bit systems, if you want to be able to compile 32bit and 64bit binaries
 - - debug         : Tells configure and the makefiles to build for debugging. Effects vary across packages, but generally it will at least add -g to CFLAGS. Remember to set FEATURES=nostrip too
 + + userlocales   : build only the locales specified in /etc/locales.build
 - - nomalloccheck : default to not performing some sanity checks that prevent and detect data corruption. this removes the small overhead introduced by the check.
 - - debug         : Tells configure and the makefiles to build for debugging. Effects vary across packages, but generally it will at least add -g to CFLAGS. Remember to set FEATURES=nostrip too

[jpalko]

Answering to my own... apparently can't even set the multilib anymore. So, propably not meant to be used.

Code: Select all

# USE=multilib emerge -Dvp gcc glibc

These are the packages that I would merge, in order:

Calculating dependencies ...done!
[ebuild   R   ] sys-devel/gcc-3.4.3-r1  (-altivec) -bootstrap -boundschecking -build -debug +fortran -gcj +gtk -hardened (-ip28) (-multilib)* -multislot (-n32) (-n64) +nls -nocxx -objc -static (-uclibc) 0 kB 
[ebuild   R   ] sys-libs/glibc-2.3.4.20041102-r1  -build -debug -erandom -hardened (-multilib) +nls -nomalloccheck +nptl -nptlonly -pic +userlocales 0 kB 

Total size of downloads: 0 kB

[wiktorw]

I'm attempting to do a clean Gentoo install, based on amd-2005.0 profile.

After unpacking stage3 image (yes, I've downloaded it already ) on an empty partition I prepare to recompile everything, but I get the following:

Code: Select all

# emerge -ave system

These are the packages that I would merge, in order:

Calculating system dependencies ...done!
[ebuild  N    ] sys-devel/patch-2.5.9-r1  -build -debug -static 0 kB
[ebuild  N    ] sys-devel/gnuconfig-20050223  0 kB
[ebuild  N    ] sys-devel/gettext-0.14.1  -emacs +nls 0 kB
[ebuild  N    ] sys-apps/sed-4.0.9  -bootstrap -build -debug +nls -static 0 kB
[ebuild  N    ] sys-libs/zlib-1.2.2  -build -debug 0 kB
[ebuild  N    ] dev-python/python-fchksum-1.7.1  0 kB
[ebuild  N    ] sys-libs/gpm-1.20.1-r4  (-selinux) 0 kB
[ebuild  N    ] sys-libs/ncurses-5.4-r5  -bootstrap -build -debug +doc* +gpm -nocxx (-uclibc) +unicode* 0 kB
[ebuild  N    ] app-shells/bash-2.05b-r9  -build -debug +nls (-uclibc) 0 kB
[ebuild  N    ] sys-libs/readline-4.3-r5  0 kB
[ebuild  N    ] sys-devel/flex-2.5.4a-r5  -build -debug -static 0 kB
[ebuild  N    ] sys-devel/bc-1.06-r6  -debug +readline -static 0 kB
[ebuild  N    ] sys-apps/diffutils-2.8.7  -debug +nls -static 0 kB
[ebuild  N    ] dev-libs/openssl-0.9.7e  -debug -emacs (-uclibc) 0 kB
[ebuild  N    ] sys-libs/db-1.85-r2  0 kB
[ebuild  N    ] sys-libs/gdbm-1.8.3-r1  +berkdb -debug 0 kB
[ebuild  N    ] dev-libs/expat-1.95.8  -test 0 kB
[ebuild  N    ] dev-python/python-docs-2.3.4  0 kB
[ebuild  N    ] dev-lang/python-2.3.4-r1  -X +berkdb -bootstrap -build -debug +doc* +gdbm* +ipv6 +ncurses +readline +ssl -tcltk -ucs2 0 kB
[ebuild  N    ] dev-java/java-config-1.2.11  0 kB
[ebuild  N    ] dev-java/blackdown-jre-1.4.2.01-r1  +mozilla 0 kB
[ebuild  N    ] app-arch/unzip-5.50-r2  0 kB
[ebuild  N f  ] dev-java/java-sdk-docs-1.4.2  0 kB
[ebuild  N    ] dev-java/blackdown-jdk-1.4.2.01-r2  +doc +mozilla 0 kB
[ebuild  N    ] sys-libs/db-4.1.25_p1-r4  -bootstrap +doc* +java* -nocxx -tcltk 0 kB
[ebuild  N    ] sys-apps/texinfo-4.7-r1  -build -debug +nls -static 0 kB
[ebuild  N    ] sys-apps/groff-1.19.1-r2  -X -debug 0 kB
[ebuild  N    ] sys-devel/libperl-5.8.5  +berkdb -debug +gdbm* -ithreads (-uclibc) 0 kB
[ebuild  N    ] dev-lang/perl-5.8.5-r5  +berkdb -debug +doc +gdbm -ithreads -perlsuid (-uclibc) 0 kB
[ebuild  N    ] sys-devel/binutils-2.15.92.0.2-r1  -bootstrap -build -debug (-multitarget) +nls (-uclibc) 0 kB
[ebuild  N    ] sys-process/cronbase-0.3.1  0 kB
[ebuild  N    ] sys-apps/man-1.5p  -debug +nls 0 kB
[ebuild  N    ] sys-devel/m4-1.4.2-r1  +nls 0 kB
[ebuild  N    ] sys-devel/bison-1.875d  -debug +nls -static 0 kB
[ebuild  N    ] sys-apps/debianutils-1.16.7-r4  -build -debug -static 0 kB
[ebuild  N    ] sys-apps/portage-2.0.51.19  -build -debug (-selinux) 0 kB
*** Please update portage to the above version before proceeding.
    Failure to do so may result in failed or improper merges.
    A simple 'emerge -u portage' is sufficient.

[ebuild  N    ] sys-devel/gcc-config-1.3.10-r1  0 kB
[ebuild  N    ] sys-devel/gcc-3.4.3.20050110-r1  (-altivec) -bootstrap -boundschecking -build -debug +fortran -gcj -gtk -hardened (-ip28) (-multilib) -multislot (-n32) (-n64) +nls -nocxx -objc -static (-uclibc) 0 kB
[ebuild  N    ] sys-libs/libstdc++-v3-3.3.4  -debug +nls 0 kB
[ebuild  N    ] sys-kernel/linux-headers-2.6.8.1-r4  0 kB
[ebuild  N    ] sys-apps/gawk-3.1.3-r2  -build +nls (-uclibc) 0 kB
[ebuild  N    ] dev-libs/glib-1.2.10-r5  -debug 0 kB
[ebuild  N    ] sys-devel/autoconf-2.13  0 kB
[ebuild  N    ] sys-devel/autoconf-wrapper-2-r1  0 kB
[ebuild  N    ] sys-devel/autoconf-2.59-r6  0 kB
[ebuild  N    ] sys-devel/automake-1.5  0 kB
[ebuild  N    ] sys-devel/automake-1.8.5-r3  0 kB
[ebuild  N    ] sys-devel/automake-1.6.3  0 kB
[ebuild  N    ] sys-devel/automake-1.7.9-r1  0 kB
[ebuild  N    ] sys-devel/automake-1.4_p6  0 kB
[ebuild  N    ] sys-devel/automake-wrapper-1-r1  0 kB
[ebuild  N    ] sys-devel/automake-1.9.4  0 kB
[ebuild  N    ] sys-apps/miscfiles-1.4.2  -minimal 0 kB
[ebuild  N    ] sys-libs/cracklib-2.7-r11  -debug -minimal +pam 0 kB
[ebuild  N    ] sys-libs/pam-0.77-r6  +berkdb -debug -pwdb (-selinux) 0 kB
[ebuild  N    ] sys-apps/pam-login-3.14  -livecd +nls (-selinux) 0 kB
[ebuild  N    ] sys-fs/e2fsprogs-1.35-r1  -debug -diet +nls -static 0 kB
[ebuild  N    ] dev-libs/libpcre-5.0  -debug 0 kB
[ebuild  N    ] sys-apps/grep-2.5.1-r6  -build -debug +nls +pcre* -static (-uclibc) 0 kB
[ebuild  N    ] app-crypt/hashalot-0.3  0 kB
[ebuild  N    ] sys-apps/util-linux-2.12i-r1  +crypt* -debug +nls +pam +perl (-selinux) -static 0 kB
[ebuild  N    ] sys-apps/baselayout-1.9.4-r7  -bootstrap -build -debug -livecd (-selinux) -static (-uclibc) 0 kB
[ebuild  N    ] sys-libs/glibc-2.3.4.20050125-r1  -build -debug -erandom -hardened (-multilib) +nls -nomalloccheck +nptl +nptlonly +pic +userlocales 0 kB
[ebuild  N    ] app-arch/bzip2-1.0.2-r5  -build -debug -static 0 kB
[ebuild  N    ] app-arch/cpio-2.6-r1  +nls 0 kB
[ebuild  N    ] app-arch/gzip-1.3.5-r5  -build -debug +nls +pic* -static 0 kB
[ebuild  N    ] app-arch/ncompress-4.2.4-r1  -build 0 kB
[ebuild  N    ] app-arch/tar-1.15.1  -build -debug +nls -static 0 kB
[ebuild  N    ] app-shells/sash-3.7  -debug +readline 0 kB
[ebuild  N    ] app-text/sgml-common-0.6.3-r4  0 kB
[ebuild  N    ] app-text/opensp-1.5-r1  +nls 0 kB
[ebuild  N    ] app-text/openjade-1.3.2-r1  -debug 0 kB
[ebuild  N    ] app-text/docbook-sgml-dtd-4.1-r2  0 kB
[ebuild  N    ] app-text/docbook-sgml-dtd-4.0-r2  0 kB
[ebuild  N    ] sys-apps/which-2.16  0 kB
[ebuild  N    ] app-text/docbook-xml-simple-dtd-4.1.2.4  0 kB
[ebuild  N    ] dev-perl/SGMLSpm-1.03-r5  0 kB
[ebuild  N    ] app-text/docbook-dsssl-stylesheets-1.77-r2  0 kB
[ebuild  N    ] app-text/docbook-sgml-dtd-3.0-r2  0 kB
[ebuild  N    ] app-text/docbook-sgml-dtd-3.1-r2  0 kB
[ebuild  N    ] www-client/lynx-2.8.5  -debug +ipv6 +nls +ssl 0 kB
[ebuild  N    ] dev-libs/libxml2-2.6.15-r1  -debug +ipv6 +python +readline 0 kB
[ebuild  N    ] app-text/build-docbook-catalog-1.2  0 kB
[ebuild  N    ] app-text/docbook-xsl-stylesheets-1.65.1  0 kB
[ebuild  N    ] app-text/docbook-xml-dtd-4.3  0 kB
[ebuild  N    ] app-text/docbook-sgml-utils-0.6.12  -tetex 0 kB
[ebuild  N    ] app-text/docbook-sgml-dtd-4.2-r1  0 kB
[ebuild  N    ] net-misc/iputils-021109-r3  -debug +doc* +ipv6 -static (-uclibc) 0 kB
[ebuild  N    ] dev-libs/popt-1.7-r1  +nls 0 kB
[ebuild  N    ] sys-devel/libtool-1.5.10-r4  (-uclibc) 0 kB
[ebuild  N    ] sys-apps/attr-2.4.19  -debug +nls 0 kB
[ebuild  N    ] sys-apps/acl-2.2.27  -debug +nls 0 kB
[ebuild  N    ] net-misc/rsync-2.6.0-r4  +acl -build -debug -static 0 kB
[ebuild  N    ] net-misc/wget-1.9.1-r3  -build -debug +ipv6 +nls -socks5 +ssl -static 0 kB
[ebuild  N    ] dev-perl/Locale-gettext-1.03  0 kB
[ebuild  N    ] sys-apps/help2man-1.33.1  +nls 0 kB
[ebuild  N    ] sys-apps/coreutils-5.2.1-r4  +acl* -build -debug +nls (-selinux) -static (-uclibc)0 kB
[ebuild  N    ] sys-apps/ed-0.2-r6  0 kB
[ebuild  N    ] sys-apps/file-4.12  -build -debug +python 0 kB
[ebuild  N    ] sys-apps/findutils-4.1.20-r1  (-afs) -build -debug +nls (-selinux) -static 0 kB
[ebuild  N    ] sys-apps/kbd-1.12-r3  +nls 0 kB
[ebuild  N    ] sys-apps/less-382-r2  0 kB
[ebuild  N    ] sys-apps/man-pages-2.01  0 kB
[ebuild  N    ] sys-apps/net-tools-1.60-r9  -build -debug +nls -static (-uclibc) 0 kB
[ebuild  N    ] sys-process/procps-3.2.4-r3  -debug (-n32) 0 kB
[ebuild  N    ] sys-process/psmisc-21.5  +nls (-selinux) 0 kB
[ebuild  N    ] sys-apps/shadow-4.0.5-r3  -debug +nls +pam (-selinux) -skey 0 kB
[ebuild  N    ] sys-devel/make-3.80-r1  -build -debug +nls -static (-uclibc) 0 kB
[ebuild  N    ] sys-apps/hotplug-base-20040401  0 kB
[ebuild  N    ] sys-fs/udev-045  (-selinux) -static 0 kB
[ebuild  N    ] app-editors/nano-1.3.4  -build -debug -justify +ncurses +nls -nomac -slang -spell 0 kB
[ebuild  N    ] sys-apps/module-init-tools-3.0-r2  -debug 0 kB
[ebuild  N    ] sys-apps/tcp-wrappers-7.6-r8  +ipv6 0 kB
[ebuild  N    ] net-misc/openssh-3.9_p1-r2  -X509 -chroot -debug +ipv6 -kerberos -ldap -nocxx +pam(-selinux) -sftplogging -skey -smartcard -static +tcpd 0 kB
[ebuild  N    ] sys-libs/pwdb-0.62  -debug (-selinux) 0 kB
[ebuild  N    ] sys-apps/hdparm-5.7-r1  0 kB
[ebuild  N    ] sys-apps/linux32-1.0  0 kB

Total size of downloads: 0 kB

Do you want me to merge these packages? [Yes/No]

Of special interest are the lines:

Code: Select all

[ebuild  N    ] sys-devel/gcc-3.4.3.20050110-r1  (-altivec) -bootstrap -boundschecking -build -debug +fortran -gcj -gtk -hardened (-ip28) (-multilib) -multislot (-n32) (-n64) +nls -nocxx -objc -static (-uclibc) 0 kB
...
[ebuild  N    ] sys-libs/glibc-2.3.4.20050125-r1  -build -debug -erandom -hardened (-multilib) +nls -nomalloccheck +nptl +nptlonly +pic +userlocales 0 kB

Both gcc-3.4.3.20050110-r1 and glibc-2.3.4.20050125-r1 packages have (-multilib) flag set, so I assume that the system emerged this way WILL NOT have any multilib support. Which I consider pretty bad

I've read somewhere that amd64 arch is going to drop multilib eventually (specificialy the emul* libraries), but I thought it wouldn't be until 2005.1. For now I'm having a system without multilib support for two weeks (those frequent "emerge --sync" -- you probably know...). And I can't emerge a new one with multilib enabled

Is anyone having similar problem?

[Maedhros]

What it means is that multilib is forced in this profile - you can't deselect it. There's a seperate profile if you don't want multilib support.

[wiktorw]

What it means is that multilib is forced in this profile - you can't deselect it. There's a seperate profile if you don't want multilib support.

Yay, multilib is "forced"? Even though it's displayed as (-multilib) (with minus sign before it)?

Oookaaay then. I'm giving it a try. News update in ~4 hours.
Cheers!

[wiktorw]

Several hours later...

So far, so good. Everything compiles cleanly. And when one can see while
emerging in /var/tmp/portage/gcc-3.4.3-r1/work/gcc-3.4.3/libstdc++-v3
a message like: "Adding multilib to Makefile"...
...it just means it's going to be fine

Good work, Gentoo developers!

[Mythos]

so ... can i have multilib with 2005.0 profile or not ?

as far i know 2005.0 only update some security issues ...

i will only change if it support multilib ...

[spielc]

@ Mythos:

2005.0 in standard settings FORCES multilib, if you don't want multilib you have to select another profile

[Lucifeer]

What it means is that multilib is forced in this profile - you can't deselect it. There's a seperate profile if you don't want multilib support.

Does 2005.0 also force "ntpl" ?

hel root # USE="multilib ntpl" emerge -pv gcc glibc

These are the packages that I would merge, in order:

Calculating dependencies ...done!
[ebuild R ] sys-devel/gcc-3.4.3-r1 (-altivec) -bootstrap -boundschecking -build -debug +fortran -gcj -gtk -hardened (-ip28) (-multilib) -multislot (-n32) (-n64) +nls -nocxx -objc -static (-uclibc) 0 kB
[ebuild R ] sys-libs/glibc-2.3.4.20041102-r1 -build -debug -erandom -hardened (-multilib) +nls -nomalloccheck -nptl -nptlonly -pic +userlocales 0 kB

Total size of downloads: 0 kB
hel root #

Both multilib and ntpl is marked out since I upgraded to the multilib-2005.0 profile

[J.M.I.T.]

What it means is that multilib is forced in this profile - you can't deselect it. There's a seperate profile if you don't want multilib support.

Does 2005.0 also force "ntpl" ?

hel root # USE="multilib ntpl" emerge -pv gcc glibc

These are the packages that I would merge, in order:

Calculating dependencies ...done!
[ebuild R ] sys-devel/gcc-3.4.3-r1 (-altivec) -bootstrap -boundschecking -build -debug +fortran -gcj -gtk -hardened (-ip28) (-multilib) -multislot (-n32) (-n64) +nls -nocxx -objc -static (-uclibc) 0 kB
[ebuild R ] sys-libs/glibc-2.3.4.20041102-r1 -build -debug -erandom -hardened (-multilib) +nls -nomalloccheck -nptl -nptlonly -pic +userlocales 0 kB

Total size of downloads: 0 kB
hel root #

Both multilib and ntpl is marked out since I upgraded to the multilib-2005.0 profile

that's an easy one... ;-P
tpyo: ntpl != nptl

[Lucifeer]

that's an easy one... ;-P
tpyo: ntpl != nptl

Sigh, I must be going blind. Thanks for the correction

[maikmerten]

Seems I have some bad luck upgrading to 2005.0.

The "easy, scripted way" fails on "make -f Makefile-profile_update-2005.0":

Code: Select all

../include/signal.h:40: warning: `struct sigcontext' declared inside parameter list
x86_64-pc-linux-gnu-gcc ../sysdeps/posix/sysv_signal.c -c -std=gnu99 -O2 -Wall -Winline -Wstrict-prototypes -Wwrite-strings -freorder-blocks -mpreferred-stack-boundary=2     -I../include -I. -I/var/tmp/portage/glibc-2.3.4.20041102-r1/work/build-x86-i686-pc-linux-gnu-linuxthreads/signal -I.. -I../libio  -I/var/tmp/portage/glibc-2.3.4.20041102-r1/work/build-x86-i686-pc-linux-gnu-linuxthreads -I../sysdeps/i386/elf -I../linuxthreads/sysdeps/unix/sysv/linux/i386 -I../linuxthreads/sysdeps/unix/sysv/linux -I../linuxthreads/sysdeps/pthread -I../sysdeps/pthread -I../linuxthreads/sysdeps/unix/sysv -I../linuxthreads/sysdeps/unix -I../linuxthreads/sysdeps/i386/i686 -I../linuxthreads/sysdeps/i386 -I../libidn/sysdeps/unix -I../sysdeps/unix/sysv/linux/i386 -I../sysdeps/unix/sysv/linux -I../sysdeps/gnu -I../sysdeps/unix/common -I../sysdeps/unix/mman -I../sysdeps/unix/inet -I../sysdeps/unix/sysv/i386 -I../sysdeps/unix/sysv -I../sysdeps/unix/i386 -I../sysdeps/unix -I../sysdeps/posix -I../sysdeps/i386/i686/fpu -I../sysdeps/i386/i686 -I../sysdeps/i386/i486 -I../sysdeps/i386/fpu -I../sysdeps/i386 -I../sysdeps/wordsize-32 -I../sysdeps/ieee754/ldbl-96 -I../sysdeps/ieee754/dbl-64 -I../sysdeps/ieee754/flt-32 -I../sysdeps/ieee754 -I../sysdeps/generic/elf -I../sysdeps/generic -nostdinc -isystem /usr/lib/gcc-lib/x86_64-pc-linux-gnu/3.3.4/include -isystem //usr/include -D_LIBC_REENTRANT -include ../include/libc-symbols.h       -o /var/tmp/portage/glibc-2.3.4.20041102-r1/work/build-x86-i686-pc-linux-gnu-linuxthreads/signal/sysv_signal.o -MD -MP -MF /var/tmp/portage/glibc-2.3.4.20041102-r1/work/build-x86-i686-pc-linux-gnu-linuxthreads/signal/sysv_signal.o.dt -MT /var/tmp/portage/glibc-2.3.4.20041102-r1/work/build-x86-i686-pc-linux-gnu-linuxthreads/signal/sysv_signal.o
In file included from ../sysdeps/unix/sysv/linux/sigreturn.c:3:
../sysdeps/generic/sigreturn.c: In function `__sigreturn':
../sysdeps/generic/sigreturn.c:25: error: argument `context' doesn't match prototype
../include/signal.h:40: error: prototype declaration
../sysdeps/generic/sigreturn.c: At top level:
../sysdeps/generic/sigreturn.c:31: error: conflicting types for `sigreturn'
../signal/signal.h:331: error: previous declaration of `sigreturn'
make[3]: *** [/var/tmp/portage/glibc-2.3.4.20041102-r1/work/build-x86-i686-pc-linux-gnu-linuxthreads/signal/sigreturn.o] Error 1
make[3]: *** Waiting for unfinished jobs....
In file included from ../include/signal.h:5,
                 from ../linuxthreads/descr.h:22,
                 from ../linuxthreads/sysdeps/i386/tls.h:75,
                 from ../include/tls.h:6,
                 from ../include/errno.h:22,
                 from ../sysdeps/posix/sysv_signal.c:19:
../signal/signal.h:331: warning: `struct sigcontext' declared inside parameter list
../signal/signal.h:331: warning: its scope is only this definition or declaration, which is probably not what you want
In file included from ../linuxthreads/descr.h:22,
                 from ../linuxthreads/sysdeps/i386/tls.h:75,
                 from ../include/tls.h:6,
                 from ../include/errno.h:22,
                 from ../sysdeps/posix/sysv_signal.c:19:
../include/signal.h:40: warning: `struct sigcontext' declared inside parameter list
make[3]: Leaving directory `/var/tmp/portage/glibc-2.3.4.20041102-r1/work/glibc-2.3.3/signal'
make[2]: *** [signal/subdir_lib] Error 2
make[2]: Leaving directory `/var/tmp/portage/glibc-2.3.4.20041102-r1/work/glibc-2.3.3'
make[1]: *** [all] Error 2
make[1]: Leaving directory `/var/tmp/portage/glibc-2.3.4.20041102-r1/work/build-x86-i686-pc-linux-gnu-linuxthreads'

!!! ERROR: sys-libs/glibc-2.3.4.20041102-r1 failed.
!!! Function src_compile, Line 739, Exitcode 2
!!! (no error message)
!!! If you need support, post the topmost build error, NOT this status message.

make: *** [step5] Fehler 1

"Upgrading by hand" fails on "emerge -v --oneshot '>=sys-apps/portage-2.0.51-r9'" with

Code: Select all

>>> emerge (1 of 1) sys-apps/portage-2.0.51.19 to /
>>> md5 src_uri ;-) portage-2.0.51.19.tar.bz2
>>> Unpacking source...
>>> Unpacking portage-2.0.51.19.tar.bz2 to /var/tmp/portage/portage-2.0.51.19/work
>>> Source unpacked.
rm -f libsandbox.so sandbox
rm -f *.o *~ core
rm -f localdecls.h
./create-localdecls
Checking truncate argument type... off_t
Checking libc version... libc.so.6
Checking glibc subversion... 2.3

x86_64-pc-linux-gnu-gcc -O1 -pipe -DSB_HAVE_64BIT_ARCH  -D_GNU_SOURCE -DPIC -fPIC -D_REENTRANT -Wall -c libsandbox.c
x86_64-pc-linux-gnu-gcc -O1 -pipe -DSB_HAVE_64BIT_ARCH  -D_GNU_SOURCE -DPIC -fPIC -D_REENTRANT -Wall -c sandbox_futils.c -o sandbox_futils.o
x86_64-pc-linux-gnu-gcc libsandbox.o sandbox_futils.o -shared  -fPIC -ldl -lc -nostdlib -lgcc -o libsandbox.so
/usr/lib/gcc-lib/x86_64-pc-linux-gnu/3.3.4/../../../../x86_64-pc-linux-gnu/bin/ld: skipping incompatible /usr/lib/gcc-lib/x86_64-pc-linux-gnu/3.3.4/../../../libdl.so when searching for -ldl
/usr/lib/gcc-lib/x86_64-pc-linux-gnu/3.3.4/../../../../x86_64-pc-linux-gnu/bin/ld: skipping incompatible /usr/lib/gcc-lib/x86_64-pc-linux-gnu/3.3.4/../../../libdl.a when searching for -ldl
/usr/lib/gcc-lib/x86_64-pc-linux-gnu/3.3.4/../../../../x86_64-pc-linux-gnu/bin/ld: skipping incompatible /usr/lib/libdl.so when searching for -ldl
/usr/lib/gcc-lib/x86_64-pc-linux-gnu/3.3.4/../../../../x86_64-pc-linux-gnu/bin/ld: skipping incompatible /usr/lib/libdl.a when searching for -ldl
/usr/lib/gcc-lib/x86_64-pc-linux-gnu/3.3.4/../../../../x86_64-pc-linux-gnu/bin/ld: cannot find -ldl
collect2: ld returned 1 exit status
make: *** [libsandbox.so] Fehler 1

!!! ERROR: sys-apps/portage-2.0.51.19 failed.
!!! Function src_compile, Line 70, Exitcode 2
!!! (no error message)
!!! If you need support, post the topmost build error, NOT this status message.

Just doing "emerge glibc" fails, too - so I am a bit worried that my system is somehow ruined.

If there's something obvious causing that please help

Maik

[spielc]

Ok change back to the 2004.3-profile. Then do a FEATURES="-sandbox" emerge -u gcc (from the output i take it you still use gcc 3.3.4) followed by a emerge glibc followed by a emerge portage (to get multilib back) and after that try the make-file again

[Mythos]

well i change to 2005.0 it downlaod emul-glib 1000 or something like that, skype opera and other stuf stop working ... i rollback to 2004.3 and it's all fine ...

seems this jump to 2005.0 was a litle bit soon ...

[maikmerten]

Ok change back to the 2004.3-profile. Then do a FEATURES="-sandbox" emerge -u gcc (from the output i take it you still use gcc 3.3.4) followed by a emerge glibc followed by a emerge portage (to get multilib back) and after that try the make-file again

Thank you, I am now back on 2004.3

edit: still problems with glibc on "make -f Makefile-profile_update-2005.0"

Code: Select all

In file included from ../sysdeps/unix/sysv/linux/sigreturn.c:3:
../sysdeps/generic/sigreturn.c:31: error: conflicting types for 'sigreturn'
../signal/signal.h:331: error: previous declaration of 'sigreturn' was here
../sysdeps/generic/sigreturn.c:31: error: conflicting types for 'sigreturn'
../signal/signal.h:331: error: previous declaration of 'sigreturn' was here
In file included from ../include/signal.h:5,
                 from ../linuxthreads/descr.h:22,
                 from ../linuxthreads/sysdeps/i386/tls.h:75,
                 from ../include/tls.h:6,
                 from ../include/errno.h:22,
                 from ../sysdeps/posix/sysv_signal.c:19:
../signal/signal.h:331: warning: "struct sigcontext" declared inside parameter l
ist
../signal/signal.h:331: warning: its scope is only this definition or declaratio
n, which is probably not what you want
In file included from ../linuxthreads/descr.h:22,
                 from ../linuxthreads/sysdeps/i386/tls.h:75,
                 from ../include/tls.h:6,
                 from ../include/errno.h:22,
                 from ../sysdeps/posix/sysv_signal.c:19:
../include/signal.h:40: warning: "struct sigcontext" declared inside parameter l
ist
make[3]: *** [/var/tmp/portage/glibc-2.3.4.20041102-r1/work/build-x86-i686-pc-li
nux-gnu-linuxthreads/signal/sigreturn.o] Error 1
make[3]: *** Waiting for unfinished jobs....
make[3]: Leaving directory `/var/tmp/portage/glibc-2.3.4.20041102-r1/work/glibc-
2.3.3/signal'
make[2]: *** [signal/subdir_lib] Error 2
make[2]: Leaving directory `/var/tmp/portage/glibc-2.3.4.20041102-r1/work/glibc-
2.3.3'
make[1]: *** [all] Error 2
make[1]: Leaving directory `/var/tmp/portage/glibc-2.3.4.20041102-r1/work/build-
x86-i686-pc-linux-gnu-linuxthreads'

!!! ERROR: sys-libs/glibc-2.3.4.20041102-r1 failed.
!!! Function src_compile, Line 739, Exitcode 2
!!! (no error message)
!!! If you need support, post the topmost build error, NOT this status message.

make: *** [step5] Fehler 1

Hmmm.... very fragile migration process

and yet another edit: perhaps I switched to gcc 3.4.3 a bit too late - most of the libs are still compiled with gcc 3.3.4 - perhaps time reemerge some libs.

[wiktorw]

Finally I've finished migrating my Gentoo 2004.3 to 2005.0. It was as always very teaching experience. Some troubles I overcame, some problems I created myself. Maybe someone will use some of my conclusions from this thread: compilation problems while switching to 2005.0 [SOLVED]

Now I can get some rest. At last

[cmulcahy]

I'm getting closer to being upgraded to 2005.0.

After fighting to get gcc fixed using the instructions provided:

spielc wrote:
Ok change back to the 2004.3-profile. Then do a FEATURES="-sandbox" emerge -u gcc (from the output i take it you still use gcc 3.3.4) followed by a emerge glibc followed by a emerge portage (to get multilib back) and after that try the make-file again

I'm getting blocked at the emerge portage step:

Code: Select all

bash-2.05b# emerge -av portage

These are the packages that I would merge, in order:

Calculating dependencies ...done!
[ebuild   R   ] sys-apps/portage-2.0.51.19  -build -debug (-selinux) 0 kB

Total size of downloads: 0 kB

Do you want me to merge these packages? [Yes/No] yes
>>> emerge (1 of 1) sys-apps/portage-2.0.51.19 to /
>>> md5 src_uri ;-) portage-2.0.51.19.tar.bz2
>>> Unpacking source...
>>> Unpacking portage-2.0.51.19.tar.bz2 to /var/tmp/portage/portage-2.0.51.19/work
>>> Source unpacked.
 * Found valid multilib environment.
 * Building with multilib support.
./create-localdecls
Checking truncate argument type... off_t
Checking libc version... libc.so.6
Checking glibc subversion... 2.3

x86_64-pc-linux-gnu-gcc -O1 -pipe  -m64 -D_GNU_SOURCE -DPIC -fPIC -D_REENTRANT -DSB_HAVE_64BIT_ARCH -Wall -c libsandbox.c
x86_64-pc-linux-gnu-gcc -O1 -pipe  -m64 -D_GNU_SOURCE -DPIC -fPIC -D_REENTRANT -DSB_HAVE_64BIT_ARCH -Wall -c sandbox_futils.c -o sandbox_futils.o
x86_64-pc-linux-gnu-gcc libsandbox.o sandbox_futils.o -shared  -m64 -fPIC -ldl -lc -nostdlib -lgcc -o libsandbox.so
x86_64-pc-linux-gnu-gcc -O1 -pipe -m32 -D_GNU_SOURCE -DPIC -fPIC -D_REENTRANT -DSB_HAVE_64BIT_ARCH -Wall -c libsandbox.c -o libsandbox32.o
x86_64-pc-linux-gnu-gcc -O1 -pipe -m32 -D_GNU_SOURCE -DPIC -fPIC -D_REENTRANT -DSB_HAVE_64BIT_ARCH -Wall -c sandbox_futils.c -o sandbox_futils32.o
x86_64-pc-linux-gnu-gcc libsandbox32.o sandbox_futils32.o -shared -m32 -fPIC -ldl -lc -nostdlib -lgcc -o libsandbox32.so
/usr/lib/gcc/x86_64-pc-linux-gnu/3.4.3/../../../../x86_64-pc-linux-gnu/bin/ld: skipping incompatible /usr/lib/gcc/x86_64-pc-linux-gnu/3.4.3/../../../libdl.so when searching for -ldl
/usr/lib/gcc/x86_64-pc-linux-gnu/3.4.3/../../../../x86_64-pc-linux-gnu/bin/ld: skipping incompatible /usr/lib/gcc/x86_64-pc-linux-gnu/3.4.3/../../../libdl.a when searching for -ldl
/usr/lib/gcc/x86_64-pc-linux-gnu/3.4.3/../../../../x86_64-pc-linux-gnu/bin/ld: skipping incompatible /usr/lib/libdl.so when searching for -ldl
/usr/lib/gcc/x86_64-pc-linux-gnu/3.4.3/../../../../x86_64-pc-linux-gnu/bin/ld: skipping incompatible /usr/lib/libdl.a when searching for -ldl
/usr/lib/gcc/x86_64-pc-linux-gnu/3.4.3/../../../../x86_64-pc-linux-gnu/bin/ld: cannot find -ldl
collect2: ld returned 1 exit status
make: *** [libsandbox32.so] Error 1

!!! ERROR: sys-apps/portage-2.0.51.19 failed.
!!! Function src_compile, Line 79, Exitcode 2
!!! (no error message)
!!! If you need support, post the topmost build error, NOT this status message.

Any hints?[/quote]

[maikmerten]

Hello, finally I managed to switch to 2005.0. The compile problems disappeared when switching the gcc profile to 3.4.3 - I have been using 3.3.4 without knowing.

[Maedhros]

Any hints?

Which version of emul-linux-x86-glibc have you got installed? Try upgrading it to the latest version, and see if that helps.

[spielc]

Hello, finally I managed to switch to 2005.0. The compile problems disappeared when switching the gcc profile to 3.4.3 - I have been using 3.3.4 without knowing.

LOL i told you in my post

(from the output i take it you still use gcc 3.3.4)

It would be a good idea to change to gcc 3.4.x anyway as this version of gcc offers a ton of optimizations for 64-bit processors that weren't available with older versions of gcc...

[cmulcahy]

Eventually after compiling gcc several times, I did switch:

Code: Select all

bash-2.05b# gcc-config  -l
[1] x86_64-pc-linux-gnu-3.3.4
[2] x86_64-pc-linux-gnu-3.4.3 *
[3] x86_64-pc-linux-gnu-3.4.3-hardened
[4] x86_64-pc-linux-gnu-3.4.3-hardenednopie
[5] x86_64-pc-linux-gnu-3.4.3-hardenednossp

The errors I'm receiving mentioned above are with 3.4.3.

Code: Select all

bash-2.05b# emerge portage
Calculating dependencies ...done!
>>> emerge (1 of 1) sys-apps/portage-2.0.51.19 to /
>>> md5 src_uri ;-) portage-2.0.51.19.tar.bz2
>>> Unpacking source...
>>> Unpacking portage-2.0.51.19.tar.bz2 to /var/tmp/portage/portage-2.0.51.19/work
>>> Source unpacked.
 * Found valid multilib environment.
 * Building with multilib support.
./create-localdecls
Checking truncate argument type... off_t
Checking libc version... libc.so.6
Checking glibc subversion... 2.3

x86_64-pc-linux-gnu-gcc -O1 -pipe  -m64 -D_GNU_SOURCE -DPIC -fPIC -D_REENTRANT -DSB_HAVE_64BIT_ARCH -Wall -c libsandbox.c
x86_64-pc-linux-gnu-gcc -O1 -pipe  -m64 -D_GNU_SOURCE -DPIC -fPIC -D_REENTRANT -DSB_HAVE_64BIT_ARCH -Wall -c sandbox_futils.c -o sandbox_futils.o
x86_64-pc-linux-gnu-gcc libsandbox.o sandbox_futils.o -shared  -m64 -fPIC -ldl -lc -nostdlib -lgcc -o libsandbox.so
x86_64-pc-linux-gnu-gcc -O1 -pipe -m32 -D_GNU_SOURCE -DPIC -fPIC -D_REENTRANT -DSB_HAVE_64BIT_ARCH -Wall -c libsandbox.c -o libsandbox32.o
x86_64-pc-linux-gnu-gcc -O1 -pipe -m32 -D_GNU_SOURCE -DPIC -fPIC -D_REENTRANT -DSB_HAVE_64BIT_ARCH -Wall -c sandbox_futils.c -o sandbox_futils32.o
x86_64-pc-linux-gnu-gcc libsandbox32.o sandbox_futils32.o -shared -m32 -fPIC -ldl -lc -nostdlib -lgcc -o libsandbox32.so
/usr/lib/gcc/x86_64-pc-linux-gnu/3.4.3/../../../../x86_64-pc-linux-gnu/bin/ld: skipping incompatible /usr/lib/gcc/x86_64-pc-linux-gnu/3.4.3/../../../libdl.so when searching for -ldl
/usr/lib/gcc/x86_64-pc-linux-gnu/3.4.3/../../../../x86_64-pc-linux-gnu/bin/ld: skipping incompatible /usr/lib/gcc/x86_64-pc-linux-gnu/3.4.3/../../../libdl.a when searching for -ldl
/usr/lib/gcc/x86_64-pc-linux-gnu/3.4.3/../../../../x86_64-pc-linux-gnu/bin/ld: skipping incompatible /usr/lib/libdl.so when searching for -ldl
/usr/lib/gcc/x86_64-pc-linux-gnu/3.4.3/../../../../x86_64-pc-linux-gnu/bin/ld: skipping incompatible /usr/lib/libdl.a when searching for -ldl
/usr/lib/gcc/x86_64-pc-linux-gnu/3.4.3/../../../../x86_64-pc-linux-gnu/bin/ld: cannot find -ldl
collect2: ld returned 1 exit status
make: *** [libsandbox32.so] Error 1

!!! ERROR: sys-apps/portage-2.0.51.19 failed.
!!! Function src_compile, Line 79, Exitcode 2
!!! (no error message)
!!! If you need support, post the topmost build error, NOT this status message.

[spielc]

In this case i'd really emerge the newest version of emul-linux-x86-glibc and try it again....

[cmulcahy]

spielc:

In this case i'd really emerge the newest version of emul-linux-x86-glibc and try it again....

I'm trying that right now as Maedhros also suggested. It seems to be getting further.

Thanks to everyone for the help so far! I'll let you know how it goes.

[maikmerten]

Hello, finally I managed to switch to 2005.0. The compile problems disappeared when switching the gcc profile to 3.4.3 - I have been using 3.3.4 without knowing.

LOL i told you in my post

Yes, but I thought I had sucessfully upgraded to a newer gcc - I indeed had but used the wrong profile

[Decibels]

How come 'multilib' even if forced doesn't show up in 'emerge info' ?

I have it in the 2005.0 stage3 I installed, but never shows up in 'emerge info' even though in make.conf.