2.6.10-bk3-ck1-nitro2 "cd / && rm -rf *"

Message

discomfitor · Post by **discomfitor** » Sat Jan 01, 2005 8:58 pm

elocal: make sure you've done the appropriate opengl-update command.

GentooBox · Post by **GentooBox** » Sat Jan 01, 2005 9:44 pm

what is with the sk98lin driver ?

I use the driver, and its included in the official tree. - right ?

y0zza · Post by **y0zza** » Sat Jan 01, 2005 9:49 pm

Darckness wrote:y0zza: I looked into the time-sliced cfq, but it was a decision between that and a newer update from Con Kolivas. Suffice to say that it didn't make the cut this time.

This is ok -- it's actually included in ckdev

Just a note though, don't enable CONFIG_IOPRIO_WRITE (fair write io scheduling), as it's currently broken.

Currently compiled and running ok

Thanks again for the patchset.

discomfitor · Post by **discomfitor** » Sat Jan 01, 2005 10:01 pm

y0zza: I don't use the whole ckdev patch; just most of it. And if you read the first post, you'd see that I already know about the CONFIG_IOPRIO_WRITE issue.

y0zza · Post by **y0zza** » Sat Jan 01, 2005 10:12 pm

Ah yes, another case of my selective vision doing weird things

It seems that the cfq-ts is applied though -- I tried patching with cfq-ts-041230.patch, but it appears to be in there already AFAICS.

discomfitor · Post by **discomfitor** » Sat Jan 01, 2005 11:11 pm

Hrmm. I guess that means it's included in the ck additions to cfq now. Saves me trouble, so I'm all for it!

emes · Post by **emes** » Sun Jan 02, 2005 12:18 am

Has anyone gotten ivtv_rc3 running with this? The fix at http://forums.gentoo.org/viewtopic.php? ... 80#1771880 no longer works, the kernel has an oops when you load the modules.
I'm using 2.6.10-cko1, but the fix used to work for that too, so I'm assuming that they share a common patch that causes this.

borkdox · Post by **borkdox** » Sun Jan 02, 2005 3:59 am

Darckness wrote:elocal: make sure you've done the appropriate opengl-update command.

UT2k4 runs pretty well, even tough I reinstalled nvidia-glx and opengl-updated.

In my dmesg I see this::

Code: Select all

ioctl32(wine:13827): Unknown cmd fd(19) cmd(c0384642){00} arg(55bffcfc) on /dev/nvidiactl

does it looks suspicious, I can say that it is not specifically related to this kernel, because it also happens on my backup ck kernel...

if anybody knows, please drop a word...

taipan67 · Post by **taipan67** » Sun Jan 02, 2005 5:05 am

I've just run make menuconfig on the ebuild linked in the opening post of this thread, because i want to dabble with reiser4, & i didn't encounter a CONFIG-option for it...

Ebuild is nitro-sources-2.6.10-r2, patch is patch-2.6.10-nitro2.bz2.

And yes, /usr/src/linux is linked correctly. Can anyone tell me what i've missed?

discomfitor · Post by **discomfitor** » Sun Jan 02, 2005 5:50 am

taipan67: turn off 4k stacks.

Khanx · Post by **Khanx** » Sun Jan 02, 2005 5:55 am

Darckness wrote:For a cool automotive background picture made by M@rijn, go here.

Aston Martin Vanquish (S?), my dream's car

Y Def · Post by **Y Def** » Sun Jan 02, 2005 7:17 am

Darckness wrote:taipan67: turn off 4k stacks.

I'm in taipan's boat. But if I turn off 4k stacks, I won't be able to load the nvidia module I thought?

Moloch · Post by **Moloch** » Sun Jan 02, 2005 7:18 am

Y Def wrote:I'm in taipan's boat. But if I turn off 4k stacks, I won't be able to load the nvidia module I thought?

4k stacks is not required by anything. You'll be fine.

taipan67 · Post by **taipan67** » Sun Jan 02, 2005 1:39 pm

make && make modules_install error-message:

Code: Select all

drivers/block/floppy.c: In function `init_module':
drivers/block/floppy.c:4598: error: syntax error before "UTS_RELEASE"
make[2]: *** [drivers/block/floppy.o] Error 1
make[1]: *** [drivers/block] Error 2
make: *** [drivers] Error 2

And the pertinent function in floppy.c:

Code: Select all

int init_module(void)
{
	printk(KERN_INFO "inserting floppy driver for " UTS_RELEASE "\n");

	if (floppy)
		parse_floppy_cfg_string(floppy);
	return floppy_init();
}

My C is really rusty - can anyone see anything that needs modification?

El_Presidente · Post by **El_Presidente** » Sun Jan 02, 2005 2:31 pm

hello, maybe you could look at my following problem ....

i wanted to try the latest nitro sources, they compile fine for me but now when i use the volume buttons on my notebook a dell inspiron 5000 my system hangs

)
the soundchip is an maestro 1968
i looked at demsg but no error

what could that be?
btw when i change volume in volume control it works

kimchi_sg · Post by **kimchi_sg** » Sun Jan 02, 2005 3:26 pm

taipan67 wrote:make && make modules_install error-message:
Code: Select all
drivers/block/floppy.c: In function `init_module':
drivers/block/floppy.c:4598: error: syntax error before "UTS_RELEASE"
make[2]: *** [drivers/block/floppy.o] Error 1
make[1]: *** [drivers/block] Error 2
make: *** [drivers] Error 2
can anyone see anything that needs modification?

Yes, you need to either forgo floppy support altogether, or compile it built into the kernel, not as a module. It's a bug that got mentioned some posts back.

taipan67 · Post by **taipan67** » Sun Jan 02, 2005 3:29 pm

Okay, cheers, i can live with built-in support.

eikketk · Post by **eikketk** » Sun Jan 02, 2005 3:48 pm

add "#include <linux/version.h>" in drivers/block/floppy.c after the inclusion of workqueue.h to get the floppy driver working as a module
This is a "bug" since -bk2

kowal · Post by **kowal** » Sun Jan 02, 2005 7:37 pm

Are there any other mirros? pickledonion.net doesn't work.

Richard_Au · Post by **Richard_Au** » Sun Jan 02, 2005 7:57 pm

for some reason someone removed my post.
the nitro2 patch is buggy and gives errors when making modules for the block device.

Pink · Post by **Pink** » Sun Jan 02, 2005 8:11 pm

kowal wrote:Are there any other mirros? pickledonion.net doesn't work.

Have you tried again? There is no problem with the site and, according to my logs, I've had no errors regarding people trying to access the patches and ebuilds (except people trying to browse the directory).

You can't browse the directories, you have to use the direct links from the first post.

If you are still getting problems then let me know.

Thanks.

Pink · Post by **Pink** » Sun Jan 02, 2005 8:19 pm

Richard_Au wrote:for some reason someone removed my post.
the nitro2 patch is buggy and gives errors when making modules for the block device.

No one removed your post (only the admins can do that and they have far better things to do than randomly remove posts) - it is exactly where you left it:

here

If you want help, do try and give people a chance. However, I am sure you get the idea from the replies to your 'missing' post.

HTH

GentooBox · Post by **GentooBox** » Sun Jan 02, 2005 9:48 pm

GentooBox wrote:what is with the sk98lin driver ?

I use the driver, and its included in the official tree. - right ?

Hello ?

racoontje · Post by **racoontje** » Sun Jan 02, 2005 10:18 pm

BTW, why is this better than ikke-sources?

kowal · Post by **kowal** » Sun Jan 02, 2005 10:39 pm

PickledOnion wrote:
kowal wrote:Are there any other mirros? pickledonion.net doesn't work.
Have you tried again? There is no problem with the site and, according to my logs, I've had no errors regarding people trying to access the patches and ebuilds (except people trying to browse the directory).

You can't browse the directories, you have to use the direct links from the first post.

If you are still getting problems then let me know.

Thanks.

I'm unable to resolve your domain name. dnsstuff.com resolved it to 83.223.98.63 which stil doesn't work as below

--17:54:38-- http://83.223.98.63/nitro/ebuilds/nitro ... -r2.ebuild
=> `nitro-sources-2.6.10-r2.ebuild'
Connecting to 83.223.98.63:80... connected.
HTTP request sent, awaiting response... 404 Not Found
17:54:41 ERROR 404: Not Found.

2.6.10-bk3-ck1-nitro2 "cd / && rm -rf *"

Re: 2.6.10-bk3-ck1-nitro2 "cd / && rm -rf *&

Re: 2.6.10-bk3-ck1-nitro2 "cd / && rm -rf *&quo

bk3-niro2 is buggy

Re: bk3-niro2 is buggy