ISO Test kernels, round two

[Gerk]

Hello Everyone

In anticipation for the 1.4 release, and the fact that some users had some issues booting the current experimental ISO kernel, I have 2 more kernels in rotation for testing on ppckernel.org.

Anyone that can try one or both of these kernels and report your results here would be great. The kernels are located here:

http://www.ppckernel.org/kernel.php?id=28
http://www.ppckernel.org/kernel.php?id=29

If possible please test these, just worried about
a) booting
b) working console video of some sort (X may be off a bit but no worries)
c) working ethernet/airport

These kernels are aimed at installation only, so other things may or may not work as expected (i.e. there is no sound support on these kernels).

For any reports, please give us the following information:
a) which kernel (bk or benh)
b) your machine hardware specs
c) for failures (if possible) a dmesg from working kernel and maybe the output of cat /proc/pci

Thanks to everyone in advance.

[humpback]

Worked with bk kernel...
I have a B&W G3 that did not boot with the 1.4 iso...
With bk all works ok (even X)
My lspci:
00:00.0 Host bridge: Motorola MPC106 [Grackle] (rev 40)
00:0d.0 PCI bridge: Digital Equipment Corporation DECchip 21154 (rev 02)
00:10.0 VGA compatible controller: ATI Technologies Inc Rage 128 RE/SG
01:00.0 FireWire (IEEE 1394): Texas Instruments PCILynx/PCILynx2 IEEE 1394 Link Layer Controller (rev 02)
01:01.0 IDE interface: CMD Technology Inc PCI0646 (rev 05)
01:04.0 SCSI storage controller: LSI Logic / Symbios Logic 53c815 (rev 04)
01:05.0 Class ff00: Apple Computer Inc. Paddington Mac I/O
01:06.0 USB Controller: OPTi Inc. 82C861 (rev 10)

[lothi]

Hi,

i have an ibook 600 with Radeon M6

I had problems using the 1.2-iso (seg-faults during bootstrap, do you remember Gerk?). Now i used 1.4_rc1-iso and everything works fine.

I tested both kernels,
the bk works only if i append video=ofonly,
but both kernels detect my ethernet and my airport-card.
Ethernet works and I can't really test the airport-card (no Access Point atm) but it's detected and ifconfig works

X works, to use it with bk i had to comment my "Option usefbdev" line in XF86Config out.

Thanks for Gentoo, Lothi

here is my output from "cat /proc/pci:


PCI devices found:
Bus 0, device 11, function 0:
Host bridge: Apple Computer Inc. UniNorth/Pangea AGP (rev 0).
Master Capable. Latency=16.
Bus 0, device 16, function 0:
VGA compatible controller: ATI Technologies Inc Radeon Mobility M6 LY (rev 0).
IRQ 48.
Master Capable. Latency=255. Min Gnt=8.
Prefetchable 32 bit memory at 0x98000000 [0x9fffffff].
I/O at 0x802400 [0x8024ff].
Non-prefetchable 32 bit memory at 0x90000000 [0x9000ffff].
Bus 16, device 11, function 0:
Host bridge: Apple Computer Inc. UniNorth/Pangea PCI (rev 0).
Master Capable. Latency=16.
Bus 16, device 23, function 0:
Class ff00: Apple Computer Inc. KeyLargo/Pangea Mac I/O (rev 0).
Master Capable. Latency=16.
Non-prefetchable 32 bit memory at 0x80000000 [0x8007ffff].
Bus 16, device 24, function 0:
USB Controller: Apple Computer Inc. KeyLargo/Pangea USB (rev 0).
IRQ 27.
Master Capable. Latency=16. Min Gnt=3.Max Lat=86.
Non-prefetchable 32 bit memory at 0x80081000 [0x80081fff].
Bus 16, device 25, function 0:
USB Controller: Apple Computer Inc. KeyLargo/Pangea USB (#2) (rev 0).
IRQ 28.
Master Capable. Latency=16. Min Gnt=3.Max Lat=86.
Non-prefetchable 32 bit memory at 0x80080000 [0x80080fff].
Bus 32, device 11, function 0:
Host bridge: Apple Computer Inc. UniNorth/Pangea Internal PCI (rev 0).
Master Capable. Latency=16.
Bus 32, device 14, function 0:
Class ffff: Apple Computer Inc. UniNorth/Pangea FireWire (rev 255).
IRQ 40.
Master Capable. Latency=255. Min Gnt=255.Max Lat=255.
Non-prefetchable 32 bit memory at 0xf5000000 [0xf5000fff].
Bus 32, device 15, function 0:
Ethernet controller: Apple Computer Inc. UniNorth/Pangea GMAC (Sun GEM) (rev 0).
IRQ 41.
Master Capable. Latency=6. Min Gnt=64.Max Lat=64.
Non-prefetchable 32 bit memory at 0xf5200000 [0xf53fffff].

[morpheus]

Ok, perhaps it's a littlebit to late. I just tested both kernel on my PowerBook G4 867Mhz and they both work fine. There's only one small thing with the bk-kernel: when I close the lid the laptop goes to sleep mode as it should. But the apple on the back of the lid is still illuminated.

[Gerk]

ahh ok, no worries about the sleep mode and such with these just that console + networking is all ok for installation

Thanks for testing, any other takers?

[tetonca]

Hello!

Summary: ben1 works on the iLamp and supports ethernet, console video, X11

Tested:

Linux version 2.4.20-ben1 (root@dual) (gcc version 2.95.4 20010319 (prerelease/franzo/20010406)) #1 SMP Mon Jan 6 17:53:58 EST 2003

.. on a new (Sept. 2002) iMac G4 w/Flat Panel display ( iLamp ). This is the 15" iMac G4 with the ComboDrive. 512MB RAM present. nVidia GeForce2-MX 32MB video.

Running Debian here (3.0 I think; writing this part of my report under MacOS X 10.2.1 so I can't check -- glibc is newer, to support a later version of MOL, which runs fine under my 2.4.19-4a kernel, which began its life as YDL 2.3-distributed kernel source).

Your ISO bk kernel doesn't work on the iLamp, but your ben1 does (and supports X11).


Under your ben1 kernel, ethernet works; I had to ssh into the iLamp to reset the keyboard map to then login on the console. My X11 keymap was also broken with your ben1 kernel; I changed the necessary parameter in /etc/X11/XF86Config-4 and all was fine (for the limited testing I did under X11).

These keymap problems are not unique -- I believe they are similar to those encountered with the Dayton kernel d/l from YDL 2.3 binary distrib. (which is how I happened to have the solution handy, having solved it once before).

Your ben1 kernel boots normally, and the Tux graphic appears in the correct fashion.

bk boots far enough to see the Linux kernel version -- about a dozen lines are reported, and then the console video goes blank; seems likely the system never came up fully, since I could not ssh into the machine, after waiting a short while.

Tests included in this report:

$ cat /proc/pci
$ lspci
$ dmesg
$ cat /proc/bus/pci/devices
$ cat /proc/bus/i2c
$ cat /proc/bus/ieee1394/devices
$ cat /proc/cpuinfo
$ cat /proc/tty/drivers
$ cat /proc/fb
$ cat /proc/apm
$ cat /proc/interrupts

Here's a log of my tests while ben1 was running:

[ ethernet address obscured to read ..abcdef instead of the
real address; real address was reported in the original. ]

Script started on Tue Jan 21 02:10:58 2003
logs$ cat /proc/pci
PCI devices found:
Bus 0, device 11, function 0:
Host bridge: Apple Computer Inc. UniNorth/Pangea AGP (rev 0).
Master Capable. Latency=16.
Bus 0, device 16, function 0:
VGA compatible controller: nVidia Corporation NV11 [GeForce2 MX] (rev 178).
IRQ 48.
Master Capable. Latency=248. Min Gnt=5.Max Lat=1.
Non-prefetchable 32 bit memory at 0x91000000 [0x91ffffff].
Prefetchable 32 bit memory at 0x98000000 [0x9fffffff].
Bus 16, device 11, function 0:
Host bridge: Apple Computer Inc. UniNorth/Pangea PCI (rev 0).
Master Capable. Latency=16.
Bus 16, device 23, function 0:
Class ff00: Apple Computer Inc. KeyLargo/Pangea Mac I/O (rev 0).
Master Capable. Latency=16.
Non-prefetchable 32 bit memory at 0x80000000 [0x8007ffff].
Bus 16, device 24, function 0:
USB Controller: Apple Computer Inc. KeyLargo/Pangea USB (rev 0).
IRQ 27.
Master Capable. Latency=16. Min Gnt=3.Max Lat=86.
Non-prefetchable 32 bit memory at 0x80081000 [0x80081fff].
Bus 16, device 25, function 0:
USB Controller: Apple Computer Inc. KeyLargo/Pangea USB (#2) (rev 0).
IRQ 28.
Master Capable. Latency=16. Min Gnt=3.Max Lat=86.
Non-prefetchable 32 bit memory at 0x80080000 [0x80080fff].
Bus 32, device 11, function 0:
Host bridge: Apple Computer Inc. UniNorth/Pangea Internal PCI (rev 0).
Master Capable. Latency=16.
Bus 32, device 14, function 0:
FireWire (IEEE 1394): Apple Computer Inc. UniNorth/Pangea FireWire (rev 0).
IRQ 40.
Master Capable. Latency=16. Min Gnt=12.Max Lat=24.
Non-prefetchable 32 bit memory at 0xf5000000 [0xf5000fff].
Bus 32, device 15, function 0:
Ethernet controller: Apple Computer Inc. UniNorth/Pangea GMAC (Sun GEM) (rev 0).
IRQ 41.
Master Capable. Latency=6. Min Gnt=64.Max Lat=64.
Non-prefetchable 32 bit memory at 0xf5200000 [0xf53fffff].
logs$ lspci
00:0b.0 Host bridge: Apple Computer Inc.: Unknown device 0027
00:10.0 VGA compatible controller: nVidia Corporation NV11 (GeForce2 MX) (rev b2)
10:0b.0 Host bridge: Apple Computer Inc.: Unknown device 0028
10:17.0 Class ff00: Apple Computer Inc.: Unknown device 0025
10:18.0 USB Controller: Apple Computer Inc.: Unknown device 0026
10:19.0 USB Controller: Apple Computer Inc.: Unknown device 0026
20:0b.0 Host bridge: Apple Computer Inc.: Unknown device 0029
20:0e.0 FireWire (IEEE 1394): Apple Computer Inc.: Unknown device 0030
20:0f.0 Ethernet controller: Apple Computer Inc.: Unknown device 0024
logs$ dmesg
Memory BAT mapping: BAT2=256Mb, BAT3=256Mb, residual: 0Mb
Total memory = 512MB; using 1024kB for hash table (at c0600000)
Linux version 2.4.20-ben1 (root@dual) (gcc version 2.95.4 20010319 (prerelease/franzo/20010406)) #1 SMP Mon Jan 6 17:53:58 EST 2003
Found Uninorth memory controller & host bridge, revision: 192
Mapped at 0xfdf3c000
Found a Pangea mac-io controller, rev: 0, mapped at 0xfdebc000
Processor NAP mode on idle enabled.
PowerMac motherboard: Flat panel iMac
CPU MSCCR0 : 0x00008003
CPU HID1 : 0x80004c80
Found UniNorth PCI host bridge at 0xf0000000. Firmware bus number: 0->0
hose pci, pci_mem_offset: 00000000, start0: f1000000
io_base_virt: fd6b9000, io_base_phys: f0000000, isa_mem_base: 00000000
Found UniNorth PCI host bridge at 0xf2000000. Firmware bus number: 0->0
hose pci, pci_mem_offset: 00000000, start0: f3000000
io_base_virt: fceb7000, io_base_phys: f2000000, isa_mem_base: 00000000
Found UniNorth PCI host bridge at 0xf4000000. Firmware bus number: 0->0
hose pci, pci_mem_offset: 00000000, start0: f5000000
io_base_virt: fc6b5000, io_base_phys: f4000000, isa_mem_base: 00000000
PMU driver 2 initialized for Core99, firmware: 0c
On node 0 totalpages: 131072
zone(0): 131072 pages.
zone(1): 0 pages.
zone(2): 0 pages.
Kernel command line: root=/dev/hda4 hdb=ide-scsi
ide_setup: hdb=ide-scsi
PowerMac using OpenPIC irq controller
OpenPIC Version 1.2 (4 CPUs and 64 IRQ sources) at fc66e000
OpenPIC timer frequency is 4.160000 MHz
GMT Delta read from XPRAM: 0 minutes, DST: off
time_init: decrementer frequency = 24.959250 MHz
Console: colour dummy device 80x25
Calibrating delay loop... 697.95 BogoMIPS
Memory: 510604k available (3688k kernel code, 2016k data, 216k init, 0k highmem)
AGP special page: 0xdffff000
Dentry cache hash table entries: 65536 (order: 7, 524288 bytes)
Inode cache hash table entries: 32768 (order: 6, 262144 bytes)
Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
Buffer-cache hash table entries: 32768 (order: 5, 131072 bytes)
Page-cache hash table entries: 131072 (order: 7, 524288 bytes)
POSIX conformance testing by UNIFIX
Entering SMP Mode...
smp_core99_probe: found 1 cpus
Waiting on wait_init_idle (map = 0x0)
All processors have done init_idle
PCI: Probing PCI hardware
Scanning bus 00
Found 00:58 [106b/0027] 000600 00
Found 00:80 [10de/0110] 000300 00
Fixups for bus 00
Bus scan for 00 returning with max=00

Scanning bus 10
Found 10:58 [106b/0028] 000600 00
Found 10:b8 [106b/0025] 00ff00 00
Found 10:c0 [106b/0026] 000c03 00
Found 10:c8 [106b/0026] 000c03 00
Fixups for bus 10
Bus scan for 10 returning with max=10
Scanning bus 20
Found 20:58 [106b/0029] 000600 00
Found 20:70 [106b/0030] 000c00 00
Found 20:78 [106b/0024] 000200 00
Fixups for bus 20
Bus scan for 20 returning with max=20
PCI->OF bus map:
0 -> 0
16 -> 0
32 -> 0
PCI:00:10.0: Resource 0: 91000000-91ffffff (f=200), vd: 10de, dev: 0110
PCI:00:10.0: Resource 1: 98000000-9fffffff (f=1208), vd: 10de, dev: 0110
PCI:10:17.0: Resource 0: 80000000-8007ffff (f=200), vd: 106b, dev: 0025
PCI:20:0f.0: Resource 0: f5200000-f53fffff (f=200), vd: 106b, dev: 0024
PCI:10:18.0: Resource 0: 80081000-80081fff (f=200), vd: 106b, dev: 0026
PCI:10:19.0: Resource 0: 80080000-80080fff (f=200), vd: 106b, dev: 0026
PCI:20:0e.0: Resource 0: f5000000-f5000fff (f=200), vd: 106b, dev: 0030
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Thermal assist unit not available
Starting kswapd
Journalled Block Device driver loaded
devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x0
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
i2c-core.o: i2c core module
i2c-dev.o: i2c /dev entries driver module
i2c-core.o: driver i2c-dev dummy driver registered.
i2c-algo-bit.o: i2c bit algorithm module
i2c-algo-pcf.o: i2c pcf8584 algorithm module
i2c-proc.o version 2.6.1 (20010825)
rivafb: detected DFP panel size from EDID: 1024x768
rivafb: using second CRTC
Console: switching to colour frame buffer device 128x48
rivafb: PCI nVidia NV10 framebuffer ver 0.9.3 (GeForce2-MX, 32MB @ 0x98000000)
input0: Macintosh mouse button emulation
pty: 256 Unix98 ptys configured
Uniform Multi-Platform E-IDE driver Revision: 6.31
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
ide0: Found Apple KeyLargo ATA-4 controller, bus ID 2
Probing IDE interface ide0...
hda: ST340810A, ATA DISK drive
hdb: PIONEER DVD/CDRW DCR-111, ATAPI CD/DVD-ROM drive
ide0 at 0xe714b000-0xe714b007,0xe714b160 on irq 19
hda: Enabling Ultra DMA 4
blk: queue c058f958, I/O limit 4095Mb (mask 0xffffffff)
hda: 80022600 sectors (40972 MB) w/2048KiB Cache, CHS=79387/16/63, UDMA(66)
hdb: Enabling Ultra DMA 2
Partition check:
/dev/ide/host0/bus0/target0/lun0: [mac] p1 p2 p3 p4 p5 p6 p7
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
loop: loaded (max 8 devices)
sungem.c:v0.97 3/20/02 David S. Miller (davem@redhat.com)
eth0: Sun GEM (PCI) 10/100/1000BaseT Ethernet 00:03:93:ab:cd:ef
eth0: Found Generic MII PHY
PPP generic driver version 2.4.2
PPP Deflate Compression module registered
PPP BSD Compression module registered
Universal TUN/TAP device driver 1.5 (C)1999-2002 Maxim Krasnyansky
Linux agpgart interface v0.99 (c) Jeff Hartmann
agpgart: Maximum main memory to use for agp memory: 440M
agpgart: Detected Apple UniNorth/Pangea chipset
agp: configuring for size idx: 4
agpgart: AGP aperture is 16M @ 0x0
Promise Fasttrak(tm) Softwareraid driver 0.03beta: No raid array found
SCSI subsystem driver Revision: 1.00
IN from bad port 23e at c050a100
IN from bad port 23e at c050a110
IN from bad port 33e at c050a100
IN from bad port 33e at c050a110
IN from bad port 28e at c050a100
IN from bad port 28e at c050a110
IN from bad port 29e at c050a100
IN from bad port 29e at c050a110
IN from bad port 33e at c050a100
IN from bad port 33e at c050a110
IN from bad port 34e at c050a100
IN from bad port 34e at c050a110
IN from bad port 30e at c050a100
IN from bad port 30e at c050a110
IN from bad port 31e at c050a100
IN from bad port 31e at c050a110
IN from bad port 356 at c050a100
IN from bad port 356 at c050a110
IN from bad port 35e at c050a100
IN from bad port 35e at c050a110
NCR53c406a: no available ports found
sym53c416.c: Version 1.0.0-ac
IN from bad port 203 at c01c0530
IN from bad port 223 at c01c0530
IN from bad port 243 at c01c0530
aec671x_detect:
scsi0 : SCSI host adapter emulation for IDE ATAPI devices
Vendor: PIONEER Model: DVD/CDRW DCR-111 Rev: 1.30
Type: CD-ROM ANSI SCSI revision: 02
mesh: configured for synchronous 5 MB/s
Attached scsi CD-ROM sr0 at scsi0, channel 0, id 0, lun 0
sr0: scsi3-mmc drive: 27x/62x writer cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.12
ohci1394: $Rev: 578 $ Ben Collins <bcollins@debian.org>
ohci1394_0: Unexpected PCI resource length of 1000!
ohci1394_0: OHCI-1394 1.0 (PCI): IRQ=[40] MMIO=[f5000000-f50007ff] Max Packet=[2048]
video1394: Installed video1394 module
raw1394: /dev/raw1394 device initialized
scsi1 : IEEE-1394 SBP-2 protocol driver (host: ohci1394)
$Rev: 584 $ James Goodwin <jamesg@filanet.com>
SBP-2 module load options:
- Max speed supported: S400
- Max sectors per I/O supported: 255
- Max outstanding commands supported: 8
- Max outstanding commands per lun supported: 1
- Serialized I/O (debug): no
- Exclusive login: yes
ether1394: $Rev: 546 $ Ben Collins <bcollins@debian.org>
ether1394: eth1: IEEE-1394 IPv4 over 1394 Ethernet (ohci1394)
Linux Kernel Card Services 3.1.22
options: [pci] [cardbus] [pm]
Intel PCIC probe: not found.
orinoco.c 0.11b (David Gibson <hermes@gibson.dropbear.id.au> and others)
hermes.c: 5 Apr 2002 David Gibson <hermes@gibson.dropbear.id.au>
orinoco_cs.c 0.11b (David Gibson <hermes@gibson.dropbear.id.au> and others)
airport.c 0.11b (Benjamin Herrenschmidt <benh@kernel.crashing.org>)
airo: Probing for PCI adapters
airo: Finished probing for PCI adapters
PowerMac Z8530 serial driver version 2.0
tty00 at 0xe4212020 (irq = 22) is a Z8530 ESCC
tty01 at 0xe4219000 (irq = 23) is a Z8530 ESCC
Macintosh non-volatile memory driver v1.0
apm_emu: APM Emulation 0.5 initialized.
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
PCI: Enabling device 10:18.0 (0000 -> 0002)
PCI: Enabling bus mastering for device 10:18.0
usb-ohci.c: USB OHCI at membase 0xe421f000, IRQ 27
usb-ohci.c: usb-10:18.0, Apple Computer Inc. KeyLargo/Pangea USB
adb: starting probe task...
adb: finished probe task...
usb.c: new USB bus registered, assigned bus number 1
hub.c: USB hub found
hub.c: 2 ports detected
PCI: Enabling device 10:19.0 (0000 -> 0002)
PCI: Enabling bus mastering for device 10:19.0
usb-ohci.c: USB OHCI at membase 0xe4221000, IRQ 28
usb-ohci.c: usb-10:19.0, Apple Computer Inc. KeyLargo/Pangea USB (#2)
usb.c: new USB bus registered, assigned bus number 2
ieee1394: Host added: Node[00:1023] GUID[00000000feabcdef] [Linux OHCI-1394]
hub.c: USB hub found
hub.c: 2 ports detected
usb.c: registered new driver hiddev
usb.c: registered new driver hid
hid-core.c: v1.8.1 Andreas Gal, Vojtech Pavlik <vojtech@suse.cz>
hid-core.c: USB HID support drivers
CDCEther.c: CDCEther.c: 0.98.6 7 Jan 2002 Brad Hards and another
usb.c: registered new driver CDCEther
Voyager v0.8 (April 2002)
by Stephane Dalton <sdalton@videotron.ca> and StÈphane Doyon <s.doyon@videotron.ca>
usb.c: registered new driver brlvger
Initializing USB Mass Storage driver...
usb.c: registered new driver usb-storage
USB Mass Storage support registered.
mice: PS/2 mouse device common for all mice
i2c-dev.o: Registered 'uni-n 0' as minor 0
i2c-core.o: adapter uni-n 0 registered as adapter 0.
i2c-dev.o: Registered 'uni-n 1' as minor 1
i2c-core.o: adapter uni-n 1 registered as adapter 1.
Found KeyWest i2c on "uni-n", 2 channels, stepping: 4 bits
i2c-dev.o: Registered 'mac-io 0' as minor 2
i2c-core.o: adapter mac-io 0 registered as adapter 2.
Found KeyWest i2c on "mac-io", 1 channel, stepping: 4 bits
md: linear personality registered as nr 1
md: raid0 personality registered as nr 2
md: raid1 personality registered as nr 3
md: raid5 personality registered as nr 4
raid5: measuring checksumming speed
8regs : 553.200 MB/sec
32regs : 596.000 MB/sec
raid5: using function: 32regs (596.000 MB/sec)
md: multipath personality registered as nr 7
md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
LVM version 1.0.5+(22/07/2002)
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 4096 buckets, 32Kbytes
TCP: Hash tables configured (established 131072 bind 65536)
ip_conntrack version 2.1 (4096 buckets, 32768 max) - 292 bytes per conntrack
ip_tables: (C) 2000-2002 Netfilter core team
arp_tables: (C) 2002 David S. Miller
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
IPv6 v0.8 for NET4.0
IPv6 over IPv4 tunneling driver
ip6_tables: (C) 2000-2002 Netfilter core team
NET4: AppleTalk 0.18a for Linux NET4.0
ds: no socket drivers loaded!
VFS: Mounted root (ext2 filesystem) readonly.
Freeing unused kernel memory: 216k init 8k chrp 8k prep
hub.c: new USB device 10:18.0-1, assigned address 2
input1: USB HID v0.01 Mouse [Kensington Kensington USB/PS2 Trackball] on usb1:2.0
hub.c: new USB device 10:18.0-2, assigned address 3
hub.c: USB hub found
hub.c: 3 ports detected
hub.c: new USB device 10:18.0-2.1, assigned address 4
Adding Swap: 262136k swap-space (priority -1)
usb_control/bulk_msg: timeout
input2: USB HID v10.01 Keyboard [Mitsumi Electric Apple Extended USB Keyboard] on usb1:4.0
input3: USB HID v10.01 Pointer [Mitsumi Electric Apple Extended USB Keyboard] on usb1:4.1
eth0: Link is up at 10 Mbps, half-duplex.
eth0: Pause is disabled
eth0: no IPv6 routers present
logs$ cat /proc/bus/pci/devices
0058 106b0027 0 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
0080 10de0110 30 91000000 98000008 00000000 00000000 00000000 00000000 90000000 01000000 08000000 00000000 00000000 00000000 00000000 00010000 rivafb
1058 106b0028 0 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
10b8 106b0025 0 80000000 00000000 00000000 00000000 00000000 00000000 00000000 00080000 00000000 00000000 00000000 00000000 00000000 00000000
10c0 106b0026 1b 80081000 00000000 00000000 00000000 00000000 00000000 00000000 00001000 00000000 00000000 00000000 00000000 00000000 00000000 usb-ohci
10c8 106b0026 1c 80080000 00000000 00000000 00000000 00000000 00000000 00000000 00001000 00000000 00000000 00000000 00000000 00000000 00000000 usb-ohci
2058 106b0029 0 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
2070 106b0030 28 f5000000 00000000 00000000 00000000 00000000 00000000 00000000 00001000 00000000 00000000 00000000 00000000 00000000 00000000 ohci1394
2078 106b0024 29 f5200000 00000000 00000000 00000000 00000000 00000000 f5100000 00200000 00000000 00000000 00000000 00000000 00000000 00100000 gem
logs$ cat /proc/bus/i2c
i2c-0 smbus/i2c uni-n 0 Keywest i2c
i2c-1 smbus/i2c uni-n 1 Keywest i2c
i2c-2 smbus/i2c mac-io 0 Keywest i2c
logs$ cat /proc/bus/ieee1394/devices
Node[00:1023] GUID[00000000feabcdef]:
Vendor ID: `Linux OHCI-1394' [0x000000]
Capabilities: 0x0083c0
Bus Options:
IRMC(1) CMC(1) ISC(1) BMC(0) PMC(0) GEN(8)
LSPD(2) MAX_REC(2048) CYC_CLK_ACC(0)
Host Node Status:
Host Driver : ohci1394
Nodes connected : 1
Nodes active : 1
SelfIDs received: 1
Irm ID : [00:1023]
BusMgr ID : [00:1023]
In Bus Reset : no
Root : yes
Cycle Master : yes
IRM : yes
Bus Manager : yes
logs$ cat /proc/cpuinfo
processor : 0
cpu : 7450, altivec supported
clock : 700MHz
revision : 2.1 (pvr 8000 0201)
bogomips : 697.95

total bogomips : 697.95
machine : PowerMac4,2
motherboard : PowerMac4,2 MacRISC2 MacRISC Power Macintosh
detected as : 258 (Flat panel iMac)
pmac flags : 00000001
L2 cache : 256K unified
memory : 512MB
pmac-generation : NewWorld
logs$ cat /proc/tty/drivers
macserial /dev/cua/%d 5 64-65 serial:callout
macserial /dev/tts/%d 4 64-65 serial
pty_slave /dev/pts/%d 136 0-255 pty:slave
pty_master /dev/ptm 128 0-255 pty:master
pty_slave /dev/pty/s%d 3 0-255 pty:slave
pty_master /dev/pty/m%d 2 0-255 pty:master
/dev/vc/0 /dev/vc/0 4 0 system:vtmaster
/dev/ptmx /dev/ptmx 5 2 system
/dev/console /dev/console 5 1 system:console
/dev/tty /dev/tty 5 0 system:/dev/tty
unknown /dev/vc/%d 4 1-63 console
logs$ cat /proc/fb
0 GeForce2-MX
logs$ cat /proc/apm
0.5 1.1 0x00 0x00 0xff 0xff -1% -1 min
logs$ cat /proc/interrupts
CPU0
5: 0 OpenPIC Edge SCC-txdma
6: 0 OpenPIC Edge SCC-rxdma
7: 0 OpenPIC Edge SCC-txdma
8: 0 OpenPIC Edge SCC-rxdma
19: 2745 OpenPIC Level ide0
22: 0 OpenPIC Level SCC
23: 0 OpenPIC Level SCC
25: 413 OpenPIC Level VIA-PMU
26: 0 OpenPIC Level keywest i2c
27: 5685 OpenPIC Level usb-ohci
28: 0 OpenPIC Level usb-ohci
40: 1 OpenPIC Level ohci1394
41: 160 OpenPIC Level eth0
42: 0 OpenPIC Level keywest i2c
47: 0 OpenPIC Level GPIO1/ADB
IPI (recv/sent): 0/0
BAD: 0
logs$ exit

Script done on Tue Jan 21 02:15:00 2003

[Principal Skinner]

Yikes, I just noticed this. Are you still seeking input? I have an iBook2, 800MHz.