Forums

Skip to content

Advanced search
  • Quick links
    • Unanswered topics
    • Active topics
    • Search
  • FAQ
  • Login
  • Register
  • Board index Assistance Kernel & Hardware
  • Search

Disable IRQ #18

Kernel not recognizing your hardware? Problems with power management or PCMCIA? What hardware is compatible with Gentoo? See here. (Only for kernels supported by Gentoo.)
Post Reply
Advanced search
6 posts • Page 1 of 1
Author
Message
NeoCORE
Tux's lil' helper
Tux's lil' helper
Posts: 100
Joined: Sat Mar 15, 2003 1:27 pm
Location: Ireland
Contact:
Contact NeoCORE
Website

Disable IRQ #18

  • Quote

Post by NeoCORE » Mon Apr 26, 2004 12:09 am

Hey all,

have one I haven't been able to find in the forums here.. With almost every kernel I have messed with (love, ck, gentoo-dev, all 2.6) I have been getting problems with IRQ #18?

Don't quite understand what is going on, but it appears to be affecting things like mplayer playback (pauses for around 15secs then resumes) and also... well, it's a niggle I would like to solve.

I can use above 2.6.4 as Speedtouch support is messed up after that (and even in 2.6.6) so any help would be great.

cheers

NeoCORE

dmesg:

Code: Select all

hub 2-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.1: UHCI Host Controller
PCI: Setting latency timer of device 0000:00:1d.1 to 64
uhci_hcd 0000:00:1d.1: irq 19, io base 0000d000
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.2: UHCI Host Controller
PCI: Setting latency timer of device 0000:00:1d.2 to 64
uhci_hcd 0000:00:1d.2: irq 18, io base 0000d400
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.3: UHCI Host Controller
PCI: Setting latency timer of device 0000:00:1d.3 to 64
uhci_hcd 0000:00:1d.3: irq 16, io base 0000d800
uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
usb 2-1: new low speed USB device using address 2
input: USB HID v1.10 Mouse [062a:0000] on usb-0000:00:1d.0-1
PCI: Setting latency timer of device 0000:00:1f.5 to 64
usb 2-2: new full speed USB device using address 3
intel8x0_measure_ac97_clock: measured 49549 usecs
intel8x0: clocking to 48000
kobject_register failed for radeonfb (-17)
Call Trace:
 [<c02f040c>] kobject_register+0x57/0x59
 [<c033fa2d>] bus_add_driver+0x4a/0x9f
 [<c02fb8eb>] pci_register_driver+0x37/0x47
 [<f992af11>] init_module+0x19/0x27 [radeonfb]
 [<c013ea67>] sys_init_module+0x130/0x25b
 [<c010aabb>] syscall_call+0x7/0xb

8139cp: 10/100 PCI Ethernet driver v1.1 (Aug 30, 2003)
ohci_hcd: 2004 Feb 02 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
ohci_hcd: block sizes: ed 64 td 64
usb 4-1: new low speed USB device using address 2
eth0: link up, 100Mbps, full-duplex, lpa 0x41E1
process `named' is using obsolete setsockopt SO_BSDCOMPAT
NET: Registered protocol family 10
IPv6 over IPv4 tunneling driver
usb 4-1: control timeout on ep0out
uhci_hcd 0000:00:1d.2: Unlink after no-IRQ?  Different ACPI or APIC settings may help.
eth0: no IPv6 routers present
NETDEV WATCHDOG: eth0: transmit timed out
eth0: Tx queue start entry 4  dirty entry 0.
eth0:  Tx descriptor 0 is 00002000. (queue head)

eth0:  Tx descriptor 1 is 00002000.
eth0:  Tx descriptor 2 is 00002000.
eth0:  Tx descriptor 3 is 00002000.
eth0: link up, 100Mbps, full-duplex, lpa 0x41E1
bootsplash 3.1.4-2004/02/19: looking for picture.... found (1280x1024, 26385 bytes, v3).
bootsplash: status on console 0 changed to on
bootsplash 3.1.4-2004/02/19: looking for picture.... found (1280x1024, 26385 bytes, v3).
bootsplash: status on console 1 changed to on
bootsplash 3.1.4-2004/02/19: looking for picture.... found (1280x1024, 26385 bytes, v3).
bootsplash: status on console 2 changed to on
bootsplash 3.1.4-2004/02/19: looking for picture.... found (1280x1024, 26385 bytes, v3).
bootsplash: status on console 3 changed to on
bootsplash 3.1.4-2004/02/19: looking for picture.... found (1280x1024, 26385 bytes, v3).
bootsplash: status on console 4 changed to on
bootsplash 3.1.4-2004/02/19: looking for picture.... found (1280x1024, 26385 bytes, v3).
bootsplash: status on console 5 changed to on
mtrr: 0xd0000000,0x8000000 overlaps existing 0xd0000000,0x1000000
atkbd.c: Unknown key released (translated set 2, code 0x7a on isa0060/serio0).
atkbd.c: This is an XFree86 bug. It shouldn't access hardware directly.
atkbd.c: Unknown key released (translated set 2, code 0x7a on isa0060/serio0).
atkbd.c: This is an XFree86 bug. It shouldn't access hardware directly.
usb 4-1: device not accepting address 2, error -110
usb 4-1: new low speed USB device using address 3
usb 4-2: new full speed USB device using address 4
hub 3-0:1.0: over-current change on port 1
hub 3-0:1.0: over-current change on port 2
irq 18: nobody cared!
Call Trace:
 [<c010ccba>] __report_bad_irq+0x2a/0x8b
 [<c010cda4>] note_interrupt+0x6f/0x9f
 [<c010d0c2>] do_IRQ+0x161/0x192
 [<c010b428>] common_interrupt+0x18/0x20

handlers:
[<c0368b3e>] (ide_intr+0x0/0x1cb)
[<c0368b3e>] (ide_intr+0x0/0x1cb)
[<c03b02e6>] (usb_hcd_irq+0x0/0x67)
[<c03621fd>] (rtl8139_interrupt+0x0/0x207)
Disabling IRQ #18
irq 18: nobody cared!
Call Trace:
 [<c010ccba>] __report_bad_irq+0x2a/0x8b
 [<c010cda4>] note_interrupt+0x6f/0x9f
 [<c010d0c2>] do_IRQ+0x161/0x192
 [<c010b428>] common_interrupt+0x18/0x20
 [<c0148bce>] kmem_cache_alloc+0x33/0x4d
 [<c010b428>] common_interrupt+0x18/0x20
 [<c0143e77>] mempool_alloc+0x75/0x16f
 [<c0124c94>] autoremove_wake_function+0x0/0x4f
 [<c0124c94>] autoremove_wake_function+0x0/0x4f
 [<c034445f>] get_request+0x15e/0x2ba
 [<c034517e>] __make_request+0x126/0x5c5
 [<c0124c94>] autoremove_wake_function+0x0/0x4f
 [<c0345784>] generic_make_request+0x167/0x1e7
 [<c0163a49>] bio_alloc+0xcb/0x19c
 [<c01631b1>] submit_bh+0x94/0x1d2
 [<c0345858>] submit_bio+0x54/0x99
 [<c0163354>] ll_rw_block+0x65/0x85
 [<c01c31e7>] ext3_bread+0x6d/0xa4
 [<c01c0207>] ext3_readdir+0x143/0x4ec
 [<c01715c6>] vfs_readdir+0x7e/0x80
 [<c01718aa>] filldir64+0x0/0x108
 [<c0171a23>] sys_getdents64+0x71/0xab
 [<c01718aa>] filldir64+0x0/0x108
 [<c010aabb>] syscall_call+0x7/0xb

handlers:
[<c0368b3e>] (ide_intr+0x0/0x1cb)
[<c0368b3e>] (ide_intr+0x0/0x1cb)
[<c03b02e6>] (usb_hcd_irq+0x0/0x67)
[<c03621fd>] (rtl8139_interrupt+0x0/0x207)
Disabling IRQ #18
irq 18: nobody cared!
Call Trace:
 [<c010ccba>] __report_bad_irq+0x2a/0x8b
 [<c010cda4>] note_interrupt+0x6f/0x9f
 [<c010d0c2>] do_IRQ+0x161/0x192
 [<c010b428>] common_interrupt+0x18/0x20

handlers:
[<c0368b3e>] (ide_intr+0x0/0x1cb)
[<c0368b3e>] (ide_intr+0x0/0x1cb)
[<c03b02e6>] (usb_hcd_irq+0x0/0x67)
[<c03621fd>] (rtl8139_interrupt+0x0/0x207)
Disabling IRQ #18
irq 18: nobody cared!
Call Trace:
 [<c010ccba>] __report_bad_irq+0x2a/0x8b
 [<c010cda4>] note_interrupt+0x6f/0x9f
 [<c010d0c2>] do_IRQ+0x161/0x192
 [<c010b428>] common_interrupt+0x18/0x20

handlers:
[<c0368b3e>] (ide_intr+0x0/0x1cb)
[<c0368b3e>] (ide_intr+0x0/0x1cb)
[<c03b02e6>] (usb_hcd_irq+0x0/0x67)
[<c03621fd>] (rtl8139_interrupt+0x0/0x207)
Disabling IRQ #18
irq 18: nobody cared!
Call Trace:
 [<c010ccba>] __report_bad_irq+0x2a/0x8b
 [<c010cda4>] note_interrupt+0x6f/0x9f
 [<c010d0c2>] do_IRQ+0x161/0x192
 [<c010b428>] common_interrupt+0x18/0x20

handlers:
[<c0368b3e>] (ide_intr+0x0/0x1cb)
[<c0368b3e>] (ide_intr+0x0/0x1cb)
[<c03b02e6>] (usb_hcd_irq+0x0/0x67)
[<c03621fd>] (rtl8139_interrupt+0x0/0x207)
Disabling IRQ #18
irq 18: nobody cared!
Call Trace:
 [<c010ccba>] __report_bad_irq+0x2a/0x8b
 [<c010cda4>] note_interrupt+0x6f/0x9f
 [<c010d0c2>] do_IRQ+0x161/0x192
 [<c0105000>] _stext+0x0/0x64
 [<c010b428>] common_interrupt+0x18/0x20
 [<c01086de>] default_idle+0x0/0x2c
 [<c0105000>] _stext+0x0/0x64
 [<c0108707>] default_idle+0x29/0x2c
 [<c0108770>] cpu_idle+0x33/0x3c
 [<c055c848>] start_kernel+0x1b1/0x202
 [<c055c3f0>] unknown_bootoption+0x0/0x110

handlers:
[<c0368b3e>] (ide_intr+0x0/0x1cb)
[<c0368b3e>] (ide_intr+0x0/0x1cb)
[<c03b02e6>] (usb_hcd_irq+0x0/0x67)
[<c03621fd>] (rtl8139_interrupt+0x0/0x207)
Disabling IRQ #18
irq 18: nobody cared!
Call Trace:
 [<c010ccba>] __report_bad_irq+0x2a/0x8b
 [<c010cda4>] note_interrupt+0x6f/0x9f
 [<c010d0c2>] do_IRQ+0x161/0x192
 [<c010b428>] common_interrupt+0x18/0x20

handlers:
[<c0368b3e>] (ide_intr+0x0/0x1cb)
[<c0368b3e>] (ide_intr+0x0/0x1cb)
[<c03b02e6>] (usb_hcd_irq+0x0/0x67)
[<c03621fd>] (rtl8139_interrupt+0x0/0x207)
Disabling IRQ #18
irq 18: nobody cared!
Call Trace:
 [<c010ccba>] __report_bad_irq+0x2a/0x8b
 [<c010cda4>] note_interrupt+0x6f/0x9f
 [<c010d0c2>] do_IRQ+0x161/0x192
 [<c010b428>] common_interrupt+0x18/0x20

handlers:
[<c0368b3e>] (ide_intr+0x0/0x1cb)
[<c0368b3e>] (ide_intr+0x0/0x1cb)
[<c03b02e6>] (usb_hcd_irq+0x0/0x67)
[<c03621fd>] (rtl8139_interrupt+0x0/0x207)
Disabling IRQ #18
irq 18: nobody cared!
Call Trace:
 [<c010ccba>] __report_bad_irq+0x2a/0x8b
 [<c010cda4>] note_interrupt+0x6f/0x9f
 [<c010d0c2>] do_IRQ+0x161/0x192
 [<c0105000>] _stext+0x0/0x64
 [<c010b428>] common_interrupt+0x18/0x20
 [<c01086de>] default_idle+0x0/0x2c
 [<c0105000>] _stext+0x0/0x64
 [<c0108707>] default_idle+0x29/0x2c
 [<c0108770>] cpu_idle+0x33/0x3c
 [<c055c848>] start_kernel+0x1b1/0x202
 [<c055c3f0>] unknown_bootoption+0x0/0x110

handlers:
[<c0368b3e>] (ide_intr+0x0/0x1cb)
[<c0368b3e>] (ide_intr+0x0/0x1cb)
[<c03b02e6>] (usb_hcd_irq+0x0/0x67)
[<c03621fd>] (rtl8139_interrupt+0x0/0x207)
Disabling IRQ #18
irq 18: nobody cared!
Call Trace:
 [<c010ccba>] __report_bad_irq+0x2a/0x8b
 [<c010cda4>] note_interrupt+0x6f/0x9f
 [<c010d0c2>] do_IRQ+0x161/0x192
 [<c010b428>] common_interrupt+0x18/0x20

handlers:
[<c0368b3e>] (ide_intr+0x0/0x1cb)
[<c0368b3e>] (ide_intr+0x0/0x1cb)
[<c03b02e6>] (usb_hcd_irq+0x0/0x67)
[<c03621fd>] (rtl8139_interrupt+0x0/0x207)
Disabling IRQ #18
irq 18: nobody cared!
Call Trace:
 [<c010ccba>] __report_bad_irq+0x2a/0x8b
 [<c010cda4>] note_interrupt+0x6f/0x9f
 [<c010d0c2>] do_IRQ+0x161/0x192
 [<c0105000>] _stext+0x0/0x64
 [<c010b428>] common_interrupt+0x18/0x20
 [<c01086de>] default_idle+0x0/0x2c
 [<c0105000>] _stext+0x0/0x64
 [<c0108707>] default_idle+0x29/0x2c
 [<c0108770>] cpu_idle+0x33/0x3c
 [<c055c848>] start_kernel+0x1b1/0x202
 [<c055c3f0>] unknown_bootoption+0x0/0x110

handlers:
[<c0368b3e>] (ide_intr+0x0/0x1cb)
[<c0368b3e>] (ide_intr+0x0/0x1cb)
[<c03b02e6>] (usb_hcd_irq+0x0/0x67)
[<c03621fd>] (rtl8139_interrupt+0x0/0x207)
Disabling IRQ #18
irq 18: nobody cared!
Call Trace:
 [<c010ccba>] __report_bad_irq+0x2a/0x8b
 [<c010cda4>] note_interrupt+0x6f/0x9f
 [<c010d0c2>] do_IRQ+0x161/0x192
 [<c0105000>] _stext+0x0/0x64
 [<c010b428>] common_interrupt+0x18/0x20
 [<c01086de>] default_idle+0x0/0x2c
 [<c0105000>] _stext+0x0/0x64
 [<c0108707>] default_idle+0x29/0x2c
 [<c0108770>] cpu_idle+0x33/0x3c
 [<c055c848>] start_kernel+0x1b1/0x202
 [<c055c3f0>] unknown_bootoption+0x0/0x110

handlers:
[<c0368b3e>] (ide_intr+0x0/0x1cb)
[<c0368b3e>] (ide_intr+0x0/0x1cb)
[<c03b02e6>] (usb_hcd_irq+0x0/0x67)
[<c03621fd>] (rtl8139_interrupt+0x0/0x207)
Disabling IRQ #18
irq 18: nobody cared!
Call Trace:
 [<c010ccba>] __report_bad_irq+0x2a/0x8b
 [<c010cda4>] note_interrupt+0x6f/0x9f
 [<c010d0c2>] do_IRQ+0x161/0x192
 [<c010b428>] common_interrupt+0x18/0x20

handlers:
[<c0368b3e>] (ide_intr+0x0/0x1cb)
[<c0368b3e>] (ide_intr+0x0/0x1cb)
[<c03b02e6>] (usb_hcd_irq+0x0/0x67)
[<c03621fd>] (rtl8139_interrupt+0x0/0x207)
Disabling IRQ #18
irq 18: nobody cared!
Call Trace:
 [<c010ccba>] __report_bad_irq+0x2a/0x8b
 [<c010cda4>] note_interrupt+0x6f/0x9f
 [<c010d0c2>] do_IRQ+0x161/0x192
 [<c010b428>] common_interrupt+0x18/0x20

handlers:
[<c0368b3e>] (ide_intr+0x0/0x1cb)
[<c0368b3e>] (ide_intr+0x0/0x1cb)
[<c03b02e6>] (usb_hcd_irq+0x0/0x67)
[<c03621fd>] (rtl8139_interrupt+0x0/0x207)
Disabling IRQ #18
irq 18: nobody cared!
Call Trace:
 [<c010ccba>] __report_bad_irq+0x2a/0x8b
 [<c010cda4>] note_interrupt+0x6f/0x9f
 [<c010d0c2>] do_IRQ+0x161/0x192
 [<c010b428>] common_interrupt+0x18/0x20
 [<c0162068>] block_read_full_page+0x193/0x302
 [<c01471fd>] read_pages+0xef/0x13e
 [<c01e3a54>] fat_get_block+0x0/0x18d
 [<c01475c1>] do_page_cache_readahead+0x126/0x1c5
 [<c01477c5>] page_cache_readahead+0x165/0x191
 [<c014175d>] do_generic_mapping_read+0xe1/0x3d7
 [<c0141a53>] file_read_actor+0x0/0xea
 [<c0141d29>] __generic_file_aio_read+0x1ec/0x21e
 [<c0141a53>] file_read_actor+0x0/0xea
 [<c0141e5d>] generic_file_read+0x8e/0xac
 [<c0168ab5>] cp_new_stat64+0x114/0x129
 [<c010cc66>] handle_IRQ_event+0x3a/0x64
 [<c010d04a>] do_IRQ+0xe9/0x192
 [<c015e302>] vfs_read+0xb0/0x119
 [<c010b428>] common_interrupt+0x18/0x20
 [<c015e57d>] sys_read+0x42/0x63
 [<c010aabb>] syscall_call+0x7/0xb

handlers:
[<c0368b3e>] (ide_intr+0x0/0x1cb)
[<c0368b3e>] (ide_intr+0x0/0x1cb)
[<c03b02e6>] (usb_hcd_irq+0x0/0x67)
[<c03621fd>] (rtl8139_interrupt+0x0/0x207)
Disabling IRQ #18
irq 18: nobody cared!
Call Trace:
 [<c010ccba>] __report_bad_irq+0x2a/0x8b
 [<c010cda4>] note_interrupt+0x6f/0x9f
 [<c010d0c2>] do_IRQ+0x161/0x192
 [<c0105000>] _stext+0x0/0x64
 [<c010b428>] common_interrupt+0x18/0x20
 [<c01086de>] default_idle+0x0/0x2c
 [<c0105000>] _stext+0x0/0x64
 [<c0108707>] default_idle+0x29/0x2c
 [<c0108770>] cpu_idle+0x33/0x3c
 [<c055c848>] start_kernel+0x1b1/0x202
 [<c055c3f0>] unknown_bootoption+0x0/0x110

handlers:
[<c0368b3e>] (ide_intr+0x0/0x1cb)
[<c0368b3e>] (ide_intr+0x0/0x1cb)
[<c03b02e6>] (usb_hcd_irq+0x0/0x67)
[<c03621fd>] (rtl8139_interrupt+0x0/0x207)
Disabling IRQ #18
irq 18: nobody cared!
Call Trace:
 [<c010ccba>] __report_bad_irq+0x2a/0x8b
 [<c010cda4>] note_interrupt+0x6f/0x9f
 [<c010d0c2>] do_IRQ+0x161/0x192
 [<c010b428>] common_interrupt+0x18/0x20
 [<c02f007b>] idr_remove+0x224/0x231
 [<c032042b>] SHATransform+0xfe/0x12c
 [<c032062c>] extract_entropy+0x1d3/0x33a
 [<c03204ea>] extract_entropy+0x91/0x33a
 [<c010b428>] common_interrupt+0x18/0x20
 [<c010cc66>] handle_IRQ_event+0x3a/0x64
 [<c010d04a>] do_IRQ+0xe9/0x192
 [<c010b428>] common_interrupt+0x18/0x20
 [<c0167b82>] chrdev_open+0x0/0x291
 [<c016807b>] cdev_get+0x59/0xb6
 [<c0167f2e>] exact_lock+0xf/0x1e
 [<c0340f34>] kobj_lookup+0x144/0x1f6
 [<c0167f1a>] exact_match+0x0/0x5
 [<c0167ca5>] chrdev_open+0x123/0x291
 [<c010cc66>] handle_IRQ_event+0x3a/0x64
 [<c010d04a>] do_IRQ+0xe9/0x192
 [<c015e302>] vfs_read+0xb0/0x119
 [<c010b428>] common_interrupt+0x18/0x20
 [<c015e57d>] sys_read+0x42/0x63
 [<c010aabb>] syscall_call+0x7/0xb

handlers:
[<c0368b3e>] (ide_intr+0x0/0x1cb)
[<c0368b3e>] (ide_intr+0x0/0x1cb)
[<c03b02e6>] (usb_hcd_irq+0x0/0x67)
[<c03621fd>] (rtl8139_interrupt+0x0/0x207)
Disabling IRQ #18
irq 18: nobody cared!
Call Trace:
 [<c010ccba>] __report_bad_irq+0x2a/0x8b
 [<c010cda4>] note_interrupt+0x6f/0x9f
 [<c010d0c2>] do_IRQ+0x161/0x192
 [<c010b428>] common_interrupt+0x18/0x20

handlers:
[<c0368b3e>] (ide_intr+0x0/0x1cb)
[<c0368b3e>] (ide_intr+0x0/0x1cb)
[<c03b02e6>] (usb_hcd_irq+0x0/0x67)
[<c03621fd>] (rtl8139_interrupt+0x0/0x207)
Disabling IRQ #18
irq 18: nobody cared!
Call Trace:
 [<c010ccba>] __report_bad_irq+0x2a/0x8b
 [<c010cda4>] note_interrupt+0x6f/0x9f
 [<c010d0c2>] do_IRQ+0x161/0x192
 [<c010b428>] common_interrupt+0x18/0x20

handlers:
[<c0368b3e>] (ide_intr+0x0/0x1cb)
[<c0368b3e>] (ide_intr+0x0/0x1cb)
[<c03b02e6>] (usb_hcd_irq+0x0/0x67)
[<c03621fd>] (rtl8139_interrupt+0x0/0x207)
Disabling IRQ #18
irq 18: nobody cared!
Call Trace:
 [<c010ccba>] __report_bad_irq+0x2a/0x8b
 [<c010cda4>] note_interrupt+0x6f/0x9f
 [<c010d0c2>] do_IRQ+0x161/0x192
 [<c010b428>] common_interrupt+0x18/0x20

handlers:
[<c0368b3e>] (ide_intr+0x0/0x1cb)
[<c0368b3e>] (ide_intr+0x0/0x1cb)
[<c03b02e6>] (usb_hcd_irq+0x0/0x67)
[<c03621fd>] (rtl8139_interrupt+0x0/0x207)
Disabling IRQ #18
irq 18: nobody cared!
Call Trace:
 [<c010ccba>] __report_bad_irq+0x2a/0x8b
 [<c010cda4>] note_interrupt+0x6f/0x9f
 [<c010d0c2>] do_IRQ+0x161/0x192
 [<c0105000>] _stext+0x0/0x64
 [<c010b428>] common_interrupt+0x18/0x20
 [<c01086de>] default_idle+0x0/0x2c
 [<c0105000>] _stext+0x0/0x64
 [<c0108707>] default_idle+0x29/0x2c
 [<c0108770>] cpu_idle+0x33/0x3c
 [<c055c848>] start_kernel+0x1b1/0x202
 [<c055c3f0>] unknown_bootoption+0x0/0x110

handlers:
[<c0368b3e>] (ide_intr+0x0/0x1cb)
[<c0368b3e>] (ide_intr+0x0/0x1cb)
[<c03b02e6>] (usb_hcd_irq+0x0/0x67)
[<c03621fd>] (rtl8139_interrupt+0x0/0x207)
Disabling IRQ #18
To err is human, but to really foul things up, you need a computer :D
NeoCORE Network:)
Adopt a post today! 8)
Top
NeoCORE
Tux's lil' helper
Tux's lil' helper
Posts: 100
Joined: Sat Mar 15, 2003 1:27 pm
Location: Ireland
Contact:
Contact NeoCORE
Website

  • Quote

Post by NeoCORE » Sun May 09, 2004 3:51 pm

Speedtouch support now works in 2.6.6 (love sources) but still the error persists...

Any ideas any1?

it's a strange error.


NeoCORE
To err is human, but to really foul things up, you need a computer :D
NeoCORE Network:)
Adopt a post today! 8)
Top
Aonoa
Guru
Guru
User avatar
Posts: 589
Joined: Thu May 23, 2002 9:33 pm

  • Quote

Post by Aonoa » Sun May 09, 2004 6:50 pm

I have a similar problem.. with all 2.6 kernels above 2.6.3 I get the same "irq nobody cared!" error with my usb host controller. Most often occurring after a short idle time of doing nothing.. then my usb devices won't work until I reboot.

2.6.6.-rc2 didn't work either. I haven't tried -rc3 because I'm so tired of compiling kernels right now.. I want to know if anyone has found a fix for this behaviour?

EDIT: Now I'm trying 2.6.6 and it seems to be working fine so far. Maybe it did the trick.
Top
Zee
Apprentice
Apprentice
User avatar
Posts: 213
Joined: Sat Jan 10, 2004 11:40 am
Location: Podgrad, Slovenia

  • Quote

Post by Zee » Sat May 15, 2004 12:14 pm

[quote="eonic"]EDIT: Now I'm trying 2.6.6 and it seems to be working fine so far. Maybe it did the trick.[/quote]

Nope. I still have this error. I'm using vanilla 2.6.6 sources.

cheers,
zee
Top
Aonoa
Guru
Guru
User avatar
Posts: 589
Joined: Thu May 23, 2002 9:33 pm

  • Quote

Post by Aonoa » Sat May 15, 2004 11:50 pm

Yeah. You are right, sadly. Odd it's not fixed yet? well, I found a little work-around. Compile forced unloading of modules into the kernel.
Then you can do this whenever it happens to force it in again:

Code: Select all

rmmod -f uhci_hcd; modprobe uhci_hcd
Top
Zee
Apprentice
Apprentice
User avatar
Posts: 213
Joined: Sat Jan 10, 2004 11:40 am
Location: Podgrad, Slovenia

  • Quote

Post by Zee » Sun May 16, 2004 8:39 am

[quote="eonic"]Yeah. You are right, sadly. Odd it's not fixed yet? well, I found a little work-around. Compile forced unloading of modules into the kernel.
Then you can do this whenever it happens to force it in again:
[code]rmmod -f uhci_hcd; modprobe uhci_hcd[/code][/quote]

That's odd indeed. Though I get that error when the kernel loads my SATA hard disk (the only thing that's really built-in the kernel, the rest are modules), so I think that's some part of the code that "should" not be visible, but it is though.

I hope it will be fixed as soon as possible.

cheers,
zee
Top
Post Reply

6 posts • Page 1 of 1

Return to “Kernel & Hardware”

Jump to
  • Assistance
  • ↳   News & Announcements
  • ↳   Frequently Asked Questions
  • ↳   Installing Gentoo
  • ↳   Multimedia
  • ↳   Desktop Environments
  • ↳   Networking & Security
  • ↳   Kernel & Hardware
  • ↳   Portage & Programming
  • ↳   Gamers & Players
  • ↳   Other Things Gentoo
  • ↳   Unsupported Software
  • Discussion & Documentation
  • ↳   Documentation, Tips & Tricks
  • ↳   Gentoo Chat
  • ↳   Gentoo Forums Feedback
  • ↳   Duplicate Threads
  • International Gentoo Users
  • ↳   中文 (Chinese)
  • ↳   Dutch
  • ↳   Finnish
  • ↳   French
  • ↳   Deutsches Forum (German)
  • ↳   Diskussionsforum
  • ↳   Deutsche Dokumentation
  • ↳   Greek
  • ↳   Forum italiano (Italian)
  • ↳   Forum di discussione italiano
  • ↳   Risorse italiane (documentazione e tools)
  • ↳   Polskie forum (Polish)
  • ↳   Instalacja i sprzęt
  • ↳   Polish OTW
  • ↳   Portuguese
  • ↳   Documentação, Ferramentas e Dicas
  • ↳   Russian
  • ↳   Scandinavian
  • ↳   Spanish
  • ↳   Other Languages
  • Architectures & Platforms
  • ↳   Gentoo on ARM
  • ↳   Gentoo on PPC
  • ↳   Gentoo on Sparc
  • ↳   Gentoo on Alternative Architectures
  • ↳   Gentoo on AMD64
  • ↳   Gentoo for Mac OS X (Portage for Mac OS X)
  • Board index
  • All times are UTC
  • Delete cookies

© 2001–2026 Gentoo Foundation, Inc.

Powered by phpBB® Forum Software © phpBB Limited

Privacy Policy

 

 

magic