agrypa1
Apprentice
Joined: 31 Mar 2005
Posts: 244
|
 Posted: Sat Nov 26, 2005 1:37 pm Post subject: AverMedia TvPhone98, no signal |
 |
|
Hi,
Here is what I get at loading bttv:
| Code: |
Linux video capture interface: v1.00
bttv: driver version 0.9.16 loaded
bttv: using 8 buffers with 2080k (520 pages) each for capture
bttv: Bt8xx card found (0).
ACPI: PCI Interrupt 0000:00:0d.0[A] -> GSI 18 (level, low) -> IRQ 18
bttv0: Bt878 (rev 2) at 0000:00:0d.0, irq: 18, latency: 64, mmio: 0xefe00000
bttv0: detected: AVerMedia TVPhone98 [card=41], PCI subsystem ID is 1461:0003
bttv0: using: AVerMedia TVPhone 98 [card=41,autodetected]
bttv0: gpio: en=00000000, out=00000000 in=00ac7ff3 [init]
: chip found @ 0xc2 (bt878 #0 [sw])
bttv0: Avermedia eeprom[0x4871]: tuner=3 radio:yes remote control:yes
bttv0: using tuner=3
tuner 0-0061: type set to 3 (Philips (SECAM+PAL_BG) (FI1216MF, FM1216MF, FR1216MF))
bttv0: i2c: checking for MSP34xx @ 0x80... not found
bttv0: i2c: checking for TDA9875 @ 0xb0... not found
bttv0: i2c: checking for TDA7432 @ 0x8a... not found
bttv0: i2c: checking for TDA9887 @ 0x86... not found
bttv0: registered device video0
bttv0: registered device vbi0
bttv0: registered device radio0
bttv0: PLL: 28636363 => 35468950 . ok
bttv0: add subdevice "remote0"
|
localhost ~ # ls /dev/v4l/
radio0 vbi0 video0
Trouble is neither tvtime nor kdetv can obtain signal from the card. No channels are available. The card works under the same computer and other OS.
where to look for faults?
Agryppa
_________________
The first successor of Saint Peter was Linus (a.d. 68-79) - whose namesake became the creator of Linux in our time. Torvalds' middle name is Benedict - the name assumed by the previous Pope who resigned from office. |
|
Multimedia
