Gentoo Forums
Gentoo Forums
Gentoo Forums
Quick Search: in
X server error with stifb on hppa
View unanswered posts
View posts from last 24 hours

 
Reply to topic    Gentoo Forums Forum Index Gentoo on Alternative Architectures
View previous topic :: View next topic  
Author Message
HPRichard
Tux's lil' helper
Tux's lil' helper


Joined: 02 Feb 2005
Posts: 94
Location: KA, Germany

PostPosted: Sat Dec 08, 2007 9:32 pm    Post subject: X server error with stifb on hppa Reply with quote

On my 735/125, when trying to start X, I have a problem with the combinaion of the fbdev driver from X and the stifb driver from the kernel which prevents X from starting.
When firing up X via startx, I get
Code:
hp ~ # startx
xauth:  creating new authority file /root/.serverauth.3005


X Window System Version 1.3.0
Release Date: 19 April 2007
X Protocol Version 11, Revision 0, Release 1.3
Build Operating System: UNKNOWN
Current Operating System: Linux hp 2.6.22-hppa #1 Thu Nov 29 22:26:31 CET 2007 parisc
Build Date: 19 November 2007
        Before reporting problems, check http://wiki.x.org
        to make sure that you have the latest version.
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
        (++) from command line, (!!) notice, (II) informational,
        (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Sat Dec  8 22:16:59 2007
(==) Using config file: "/etc/X11/xorg.conf"
(EE) FBDEV(0): FBIOPUT_VSCREENINFO succeeded but modified mode
(EE) FBDEV(0): mode initialization failed

Fatal server error:
AddScreen/ScreenInit failed for driver 0

XIO:  fatal IO error 232 (Connection reset by peer) on X server ":0.0"
      after 0 requests (0 known processed) with 0 events remaining.

where the line
Code:
(EE) FBDEV(0): FBIOPUT_VSCREENINFO succeeded but modified mode

seems to be the real problem.
The kernel is built from sys-kernel/hppa-sources-2.6.22, X uses x11-base/xorg-server-1.3.0.0-r2 and x11-drivers/xf86-video-fbdev-0.3.1.
Does anyone have an idea what's going wrong here, or even better, knows how to make X run anyway?
Back to top
View user's profile Send private message
ddc
Guru
Guru


Joined: 29 Aug 2006
Posts: 527

PostPosted: Sun Dec 16, 2007 4:35 pm    Post subject: Reply with quote

unfortunately no :(
here i only use the C3600 that is equipped with a matrox pci video board
on the old HP712 i remember i had issues with the onboard video card, i don' remember exactly how i fixed it, i remember it has hard :P


so i suggest you to use IRC, to access the freenode network, and to ask about on the #gentoo-hppa channel
i think somebody could fix your issue
Back to top
View user's profile Send private message
HPRichard
Tux's lil' helper
Tux's lil' helper


Joined: 02 Feb 2005
Posts: 94
Location: KA, Germany

PostPosted: Thu Dec 27, 2007 1:28 pm    Post subject: Reply with quote

For better understanding the problem, the full /etc/X11/xorg.conf
Code:
# File generated by xf86config.

#
# Copyright (c) 1999 by The XFree86 Project, Inc.
#
# Permission is hereby granted, free of charge, to any person obtaining a
# copy of this software and associated documentation files (the "Software"),
# to deal in the Software without restriction, including without limitation
# the rights to use, copy, modify, merge, publish, distribute, sublicense,
# and/or sell copies of the Software, and to permit persons to whom the
# Software is furnished to do so, subject to the following conditions:
#
# The above copyright notice and this permission notice shall be included in
# all copies or substantial portions of the Software.
#
# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
# THE XFREE86 PROJECT BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
# WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF
# OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
# SOFTWARE.
#
# Except as contained in this notice, the name of the XFree86 Project shall
# not be used in advertising or otherwise to promote the sale, use or other
# dealings in this Software without prior written authorization from the
# XFree86 Project.
#

# **********************************************************************
# Refer to the XF86Config(4/5) man page for details about the format of
# this file.
# **********************************************************************

# **********************************************************************
# Module section -- this  section  is used to specify
# which dynamically loadable modules to load.
# **********************************************************************
#
Section "Module"

# This loads the DBE extension module.

    Load        "dbe"     # Double buffer extension

# This loads the miscellaneous extensions module, and disables
# initialisation of the XFree86-DGA extension within that module.
    SubSection  "extmod"
      Option    "omit xfree86-dga"   # don't initialise the DGA extension
    EndSubSection

# This loads the Type1 and FreeType font modules
    Load        "type1"
#    Load        "speedo"
#    Load        "freetype"
#    Load        "xtt"

# This loads the GLX module
#    Load       "glx"
# This loads the DRI module
#    Load       "dri"

EndSection

# **********************************************************************
# Files section.  This allows default font and rgb paths to be set
# **********************************************************************

Section "Files"

# The location of the RGB database.  Note, this is the name of the
# file minus the extension (like ".txt" or ".db").  There is normally
# no need to change the default.


# Multiple FontPath entries are allowed (which are concatenated together),
# as well as specifying multiple comma-separated entries in one FontPath
# command (or a combination of both methods)
#
# If you don't have a floating point coprocessor and emacs, Mosaic or other
# programs take long to start up, try moving the Type1 and Speedo directory
# to the end of this list (or comment them out).
#

    FontPath   "/usr/share/fonts/local/"
    FontPath   "/usr/share/fonts/misc/"
    FontPath   "/usr/share/fonts/75dpi/:unscaled"
    FontPath   "/usr/share/fonts/100dpi/:unscaled"
    FontPath   "/usr/share/fonts/Speedo/"
    FontPath   "/usr/share/fonts/Type1/"
#    FontPath   "/usr/share/fonts/TrueType/"
#    FontPath   "/usr/share/fonts/freefont/"
    FontPath   "/usr/share/fonts/75dpi/"
    FontPath   "/usr/share/fonts/100dpi/"

# The module search path.  The default path is shown here.


EndSection

# **********************************************************************
# Server flags section.
# **********************************************************************

Section "ServerFlags"

# Uncomment this to cause a core dump at the spot where a signal is
# received.  This may leave the console in an unusable state, but may
# provide a better stack trace in the core dump to aid in debugging

#    Option "NoTrapSignals"

# Uncomment this to disable the <Crtl><Alt><Fn> VT switch sequence
# (where n is 1 through 12).  This allows clients to receive these key
# events.

#    Option "DontVTSwitch"

# Uncomment this to disable the <Crtl><Alt><BS> server abort sequence
# This allows clients to receive this key event.

#    Option "DontZap"

# Uncomment this to disable the <Crtl><Alt><KP_+>/<KP_-> mode switching
# sequences.  This allows clients to receive these key events.

#    Option "Dont Zoom"

# Uncomment this to disable tuning with the xvidtune client. With
# it the client can still run and fetch card and monitor attributes,
# but it will not be allowed to change them. If it tries it will
# receive a protocol error.

#    Option "DisableVidModeExtension"

# Uncomment this to enable the use of a non-local xvidtune client.

#    Option "AllowNonLocalXvidtune"

# Uncomment this to disable dynamically modifying the input device
# (mouse and keyboard) settings.

#    Option "DisableModInDev"

# Uncomment this to enable the use of a non-local client to
# change the keyboard or mouse settings (currently only xset).

#    Option "AllowNonLocalModInDev"

EndSection

# **********************************************************************
# Input devices
# **********************************************************************

# **********************************************************************
# Core keyboard's InputDevice section
# **********************************************************************

Section "InputDevice"

    Identifier   "Keyboard1"
    Driver   "kbd"

# For most OSs the protocol can be omitted (it defaults to "Standard").
# When using XQUEUE (only for SVR3 and SVR4, but not Solaris),
# uncomment the following line.

#    Option     "Protocol"      "Xqueue"

    Option "AutoRepeat" "500 30"

# Specify which keyboard LEDs can be user-controlled (eg, with xset(1))
#    Option   "Xleds"      "1 2 3"

#    Option "LeftAlt"     "Meta"
#    Option "RightAlt"    "ModeShift"

# To customise the XKB settings to suit your keyboard, modify the
# lines below (which are the defaults).  For example, for a non-U.S.
# keyboard, you will probably want to use:
#    Option "XkbModel"    "pc102"
# If you have a US Microsoft Natural keyboard, you can use:
#    Option "XkbModel"    "microsoft"
#
# Then to change the language, change the Layout setting.
# For example, a german layout can be obtained with:
#    Option "XkbLayout"   "de"
# or:
#    Option "XkbLayout"   "de"
#    Option "XkbVariant"  "nodeadkeys"
#
# If you'd like to switch the positions of your capslock and
# control keys, use:
#    Option "XkbOptions"  "ctrl:swapcaps"

# These are the default XKB settings for XFree86

#    Option "XkbModel"    "pc101"
#    Option "XkbLayout"   "us"
#    Option "XkbVariant"  ""
#    Option "XkbOptions"  ""

#    Option "XkbDisable"


    Option "XkbModel"   "pc104"
    Option "XkbLayout"   "us"

EndSection


# **********************************************************************
# Core Pointer's InputDevice section
# **********************************************************************

Section "InputDevice"

# Identifier and driver

    Identifier   "Mouse1"
    Driver   "mouse"
    Option "Protocol"    "IMPS/2"
    Option "Device"      "/dev/input/mice"

# Mouse-speed setting for PS/2 mouse.

#    Option "Resolution"   "256"

# When using XQUEUE, comment out the above two lines, and uncomment
# the following line.

#    Option "Protocol"   "Xqueue"

# Baudrate and SampleRate are only for some Logitech mice. In
# almost every case these lines should be omitted.

#    Option "BaudRate"   "9600"
#    Option "SampleRate"   "150"

# Emulate3Buttons is an option for 2-button Microsoft mice
# Emulate3Timeout is the timeout in milliseconds (default is 50ms)

    Option "Emulate3Buttons"
#    Option "Emulate3Timeout"    "50"

# ChordMiddle is an option for some 3-button Logitech mice

#    Option "ChordMiddle"

EndSection


# **********************************************************************
# Other input device sections
# this is optional and is required only if you
# are using extended input devices.  This is for example only.  Refer
# to the XF86Config man page for a description of the options.
# **********************************************************************
#
# Section "InputDevice"
#    Identifier  "Mouse2"
#    Driver      "mouse"
#    Option      "Protocol"      "MouseMan"
#    Option      "Device"        "/dev/mouse2"
# EndSection
#
# Section "InputDevice"
#    Identifier "spaceball"
#    Driver     "magellan"
#    Option     "Device"        "/dev/cua0"
# EndSection
#
# Section "InputDevice"
#    Identifier "spaceball2"
#    Driver     "spaceorb"
#    Option     "Device"        "/dev/cua0"
# EndSection
#
# Section "InputDevice"
#    Identifier "touchscreen0"
#    Driver     "microtouch"
#    Option     "Device"        "/dev/ttyS0"
#    Option     "MinX"          "1412"
#    Option     "MaxX"          "15184"
#    Option     "MinY"          "15372"
#    Option     "MaxY"          "1230"
#    Option     "ScreenNumber"  "0"
#    Option     "ReportingMode" "Scaled"
#    Option     "ButtonNumber"  "1"
#    Option     "SendCoreEvents"
# EndSection
#
# Section "InputDevice"
#    Identifier "touchscreen1"
#    Driver     "elo2300"
#    Option     "Device"        "/dev/ttyS0"
#    Option     "MinX"          "231"
#    Option     "MaxX"          "3868"
#    Option     "MinY"          "3858"
#    Option     "MaxY"          "272"
#    Option     "ScreenNumber"  "0"
#    Option     "ReportingMode" "Scaled"
#    Option     "ButtonThreshold"       "17"
#    Option     "ButtonNumber"  "1"
#    Option     "SendCoreEvents"
# EndSection

# **********************************************************************
# Monitor section
# **********************************************************************

# Any number of monitor sections may be present

Section "Monitor"

    Identifier  "HP A1097C"

# HorizSync is in kHz unless units are specified.
# HorizSync may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY.  REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.

    HorizSync   20-200

#    HorizSync   30-64         # multisync
#    HorizSync   31.5, 35.2    # multiple fixed sync frequencies
#    HorizSync   15-25, 30-50  # multiple ranges of sync frequencies

# VertRefresh is in Hz unless units are specified.
# VertRefresh may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY.  REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.

    VertRefresh 20-200

EndSection


# **********************************************************************
# Graphics device section
# **********************************************************************

# Any number of graphics device sections may be present

# Standard VGA Device:

#Section "Device"
#    Identifier   "Standard VGA"
#    VendorName   "Unknown"
#    BoardName   "Unknown"

# The chipset line is optional in most cases.  It can be used to override
# the driver's chipset detection, and should not normally be specified.

#    Chipset   "generic"

# The Driver line must be present.  When using run-time loadable driver
# modules, this line instructs the server to load the specified driver
# module.  Even when not using loadable driver modules, this line
# indicates which driver should interpret the information in this section.

#    Driver     "vga"
# The BusID line is used to specify which of possibly multiple devices
# this section is intended for.  When this line isn't present, a device
# section can only match up with the primary video device.  For PCI
# devices a line like the following could be used.  This line should not
# normally be included unless there is more than one video device
# intalled.

#    BusID      "PCI:0:10:0"

#    VideoRam   256

#    Clocks   25.2 28.3

#EndSection

# Device configured by xf86config:

Section "Device"
    Identifier  "STI"
    Driver      "fbdev"
    Option   "ShadowFB" "0"
    #VideoRam    2048
    # Insert Clocks lines here if appropriate
EndSection


# **********************************************************************
# Screen sections
# **********************************************************************

# Any number of screen sections may be present.  Each describes
# the configuration of a single screen.  A single specific screen section
# may be specified from the X server command line with the "-screen"
# option.
Section "Screen"
    Identifier  "Screen 1"
    Device      "STI"
    Monitor     "HP A1097C"
    DefaultDepth 8

    Subsection "Display"
        Depth       8
        Modes       "1280x1024"
        ViewPort    0 0
    EndSubsection
    Subsection "Display"
        Depth       16
        Modes       
        ViewPort    0 0
    EndSubsection
    Subsection "Display"
        Depth       24
        Modes       
        ViewPort    0 0
    EndSubsection
EndSection

# **********************************************************************
# ServerLayout sections.
# **********************************************************************

# Any number of ServerLayout sections may be present.  Each describes
# the way multiple screens are organised.  A specific ServerLayout
# section may be specified from the X server command line with the
# "-layout" option.  In the absence of this, the first section is used.
# When now ServerLayout section is present, the first Screen section
# is used alone.

Section "ServerLayout"

# The Identifier line must be present
    Identifier  "Simple Layout"

# Each Screen line specifies a Screen section name, and optionally
# the relative position of other screens.  The four names after
# primary screen name are the screens to the top, bottom, left and right
# of the primary screen.  In this example, screen 2 is located to the
# right of screen 1.

    Screen "Screen 1"

# Each InputDevice line specifies an InputDevice section name and
# optionally some options to specify the way the device is to be
# used.  Those options include "CorePointer", "CoreKeyboard" and
# "SendCoreEvents".

    InputDevice "Mouse1" "CorePointer"
    InputDevice "Keyboard1" "CoreKeyboard"

EndSection

# Section "DRI"
#    Mode 0666
# EndSection

and the /var/log/Xorg.0.log
Code:

X Window System Version 1.3.0
Release Date: 19 April 2007
X Protocol Version 11, Revision 0, Release 1.3
Build Operating System: UNKNOWN
Current Operating System: Linux hp 2.6.22-hppa #1 Thu Nov 29 22:26:31 CET 2007 parisc
Build Date: 19 November 2007
   Before reporting problems, check http://wiki.x.org
   to make sure that you have the latest version.
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
   (++) from command line, (!!) notice, (II) informational,
   (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Thu Dec 27 14:17:06 2007
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "Simple Layout"
(**) |-->Screen "Screen 1" (0)
(**) |   |-->Monitor "HP A1097C"
(**) |   |-->Device "STI"
(**) |-->Input Device "Mouse1"
(**) |-->Input Device "Keyboard1"
(WW) The directory "/usr/share/fonts/Speedo/" does not exist.
   Entry deleted from font path.
(**) FontPath set to:
   /usr/share/fonts/local/,
   /usr/share/fonts/misc/,
   /usr/share/fonts/75dpi/:unscaled,
   /usr/share/fonts/100dpi/:unscaled,
   /usr/share/fonts/Type1/,
   /usr/share/fonts/75dpi/,
   /usr/share/fonts/100dpi/
(==) RgbPath set to "/usr/share/X11/rgb"
(==) ModulePath set to "/usr/lib/xorg/modules"
(II) No APM support in BIOS or kernel
(II) Loader magic: 0x1e7af4
(II) Module ABI versions:
   X.Org ANSI C Emulation: 0.3
   X.Org Video Driver: 1.2
   X.Org XInput driver : 0.7
   X.Org Server Extension : 0.3
   X.Org Font Renderer : 0.5
(II) Loader running on linux
(II) LoadModule: "pcidata"
(II) Loading /usr/lib/xorg/modules//libpcidata.so
(II) Module pcidata: vendor="X.Org Foundation"
   compiled for 1.3.0, module version = 1.0.0
   ABI class: X.Org Video Driver, version 1.2
(--) using VT number 7

(II) Addressable bus resource ranges are
   [0] -1   0   0x00000000 - 0xffffffff (0x0) MX[B]
   [1] -1   0   0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) OS-reported resource ranges:
   [0] -1   0   0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
   [1] -1   0   0x000f0000 - 0x000fffff (0x10000) MX[B]
   [2] -1   0   0x000c0000 - 0x000effff (0x30000) MX[B]
   [3] -1   0   0x00000000 - 0x0009ffff (0xa0000) MX[B]
   [4] -1   0   0x0000ffff - 0x0000ffff (0x1) IX[B]
   [5] -1   0   0x00000000 - 0x000000ff (0x100) IX[B]
(II) OS-reported resource ranges after removing overlaps with PCI:
   [0] -1   0   0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
   [1] -1   0   0x000f0000 - 0x000fffff (0x10000) MX[B]
   [2] -1   0   0x000c0000 - 0x000effff (0x30000) MX[B]
   [3] -1   0   0x00000000 - 0x0009ffff (0xa0000) MX[B]
   [4] -1   0   0x0000ffff - 0x0000ffff (0x1) IX[B]
   [5] -1   0   0x00000000 - 0x000000ff (0x100) IX[B]
(II) All system resource ranges:
   [0] -1   0   0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
   [1] -1   0   0x000f0000 - 0x000fffff (0x10000) MX[B]
   [2] -1   0   0x000c0000 - 0x000effff (0x30000) MX[B]
   [3] -1   0   0x00000000 - 0x0009ffff (0xa0000) MX[B]
   [4] -1   0   0x0000ffff - 0x0000ffff (0x1) IX[B]
   [5] -1   0   0x00000000 - 0x000000ff (0x100) IX[B]
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
   compiled for 1.3.0, module version = 1.0.0
   Module class: X.Org Server Extension
   ABI class: X.Org Server Extension, version 0.3
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
   compiled for 1.3.0, module version = 1.0.0
   Module class: X.Org Server Extension
   ABI class: X.Org Server Extension, version 0.3
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension DPMS
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "type1"
(II) Loading /usr/lib/xorg/modules/fonts//libtype1.so
(II) Module type1: vendor="X.Org Foundation"
   compiled for 1.3.0, module version = 1.0.2
   Module class: X.Org Font Renderer
   ABI class: X.Org Font Renderer, version 0.5
(II) Loading font Type1
(II) LoadModule: "fbdev"
(II) Loading /usr/lib/xorg/modules/drivers//fbdev_drv.so
(II) Module fbdev: vendor="X.Org Foundation"
   compiled for 7.2.0, module version = 0.3.1
   ABI class: X.Org Video Driver, version 1.1
(II) LoadModule: "mouse"
(II) Loading /usr/lib/xorg/modules/input//mouse_drv.so
(II) Module mouse: vendor="X.Org Foundation"
   compiled for 1.3.0, module version = 1.2.2
   Module class: X.Org XInput Driver
   ABI class: X.Org XInput driver, version 0.7
(II) LoadModule: "kbd"
(II) Loading /usr/lib/xorg/modules/input//kbd_drv.so
(II) Module kbd: vendor="X.Org Foundation"
   compiled for 7.2.0, module version = 1.1.0
   Module class: X.Org XInput Driver
   ABI class: X.Org XInput driver, version 0.7
(II) FBDEV: driver for framebuffer: fbdev
(II) Loading sub module "fbdevhw"
(II) LoadModule: "fbdevhw"
(II) Loading /usr/lib/xorg/modules/linux//libfbdevhw.so
(II) Module fbdevhw: vendor="X.Org Foundation"
   compiled for 1.3.0, module version = 0.0.2
   ABI class: X.Org Video Driver, version 1.2
(II) FBDEV(0): using default device
(II) Running in FRAMEBUFFER Mode
(**) FBDEV(0): Depth 8, (--) framebuffer bpp 8
(==) FBDEV(0): Default visual is PseudoColor
(==) FBDEV(0): Using gamma correction (1.0, 1.0, 1.0)
(II) FBDEV(0): hardware: stifb (video memory: 2048kB)
(**) FBDEV(0): Option "ShadowFB" "0"
(II) FBDEV(0): checking modes against framebuffer device...
(II) FBDEV(0):    mode "1280x1024" test failed
(II) FBDEV(0): checking modes against monitor...
(--) FBDEV(0): Virtual size is 1280x1024 (pitch 2048)
(**) FBDEV(0):  Built-in mode "current": 28000.0 MHz, 21875.0 kHz, 21362.3 Hz
(II) FBDEV(0): Modeline "current"  28000.00  1280 1280 1280 1280  1024 1024 1024 1024 -hsync -vsync -csync
(==) FBDEV(0): DPI set to (75, 75)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules//libfb.so
(II) Module fb: vendor="X.Org Foundation"
   compiled for 1.3.0, module version = 1.0.0
   ABI class: X.Org ANSI C Emulation, version 0.3
(EE) FBDEV(0): FBIOPUT_VSCREENINFO succeeded but modified mode
(EE) FBDEV(0): mode initialization failed

Fatal server error:
AddScreen/ScreenInit failed for driver 0

Back to top
View user's profile Send private message
bombsquad
n00b
n00b


Joined: 28 Aug 2007
Posts: 12
Location: Coventry, United Kingdom

PostPosted: Wed Jun 11, 2008 1:31 pm    Post subject: Reply with quote

did you ever get anywhere with this?
Back to top
View user's profile Send private message
Display posts from previous:   
Reply to topic    Gentoo Forums Forum Index Gentoo on Alternative Architectures All times are GMT
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum