View previous topic :: View next topic |
Author |
Message |
Giepi Apprentice
Joined: 29 Sep 2004 Posts: 164 Location: Non pallo, io!
|
Posted: Tue Nov 02, 2004 7:55 pm Post subject: Rotella Del Mouse Non Funziona Dopo emerge -uD world |
|
|
anche se è successo un mesetto fa, lo ripropongo visto che nessuno sembra capace di aiutarmi su IRC.
Come da topic dopo un emerge non mi va la rotella, anche se è TUTTO a posto.
brao ~ # cat /etc/X11/xorg.conf | grep MPS
Option "Protocol" "IMPS/2"
brao ~ # cat /var/log/Xorg.0.log | grep Mouse1
(**) |-->Input Device "Mouse1"
(**) Mouse1: Device: "/dev/input/mice"
(**) Mouse1: Protocol: "IMPS/2"
(**) Mouse1: Core Pointer
(==) Mouse1: Emulate3Buttons, Emulate3Timeout: 50
(**) Mouse1: ZAxisMapping: buttons 4 and 5
(**) Mouse1: Buttons: 5
(**) Mouse1: SmartScroll: 1
(II) XINPUT: Adding extended input device "Mouse1" (type: MOUSE)
(II) Mouse1: ps2EnableDataReporting: succeeded
(II) Mouse1: ps2EnableDataReporting: succeeded
Ecco il mouse in /etc/X11/xorg.conf
Code: | Section "InputDevice"
# Identifier and driver
Identifier "Mouse1"
Driver "mouse"
Option "Protocol" "IMPS/2"
Option "Device" "/dev/input/mice"
Option "ZAxisMapping" "4 5"
# Mouse-speed setting for PS/2 mouse.
# Option "Resolution" "256"
# When using XQUEUE, comment out the above two lines, and uncomment
# the following line.
# Option "Protocol" "Xqueue"
# Baudrate and SampleRate are only for some Logitech mice. In
# almost every case these lines should be omitted.
# Option "BaudRate" "9600"
# Option "SampleRate" "150"
# Emulate3Buttons is an option for 2-button Microsoft mice
# Emulate3Timeout is the timeout in milliseconds (default is 50ms)
# Option "Emulate3Buttons"
# Option "Emulate3Timeout" "50"
# ChordMiddle is an option for some 3-button Logitech mice
# Option "ChordMiddle"
EndSection |
ed ecco ServerLayout
Code: | Section "ServerLayout"
# The Identifier line must be present
Identifier "Simple Layout"
# Each Screen line specifies a Screen section name, and optionally
# the relative position of other screens. The four names after
# primary screen name are the screens to the top, bottom, left and right
# of the primary screen. In this example, screen 2 is located to the
# right of screen 1.
Screen "Screen 1"
# Each InputDevice line specifies an InputDevice section name and
# optionally some options to specify the way the device is to be
# used. Those options include "CorePointer", "CoreKeyboard" and
# "SendCoreEvents".
InputDevice "Mouse1" "CorePointer"
InputDevice "Keyboard1" "CoreKeyboard"
EndSection |
Sembra tutto perfetto EPPURE la rotella non gira.
A voi, gentili geek _________________ I SEE THE FLASH! THE FLAAASH!
AND YOU INFEDEL WILL DIE!!!
SLEEEPEEER AWAAAKEE!!!
* allucinato * |
|
Back to top |
|
|
xchris Advocate
Joined: 10 Jul 2003 Posts: 2824
|
Posted: Tue Nov 02, 2004 8:11 pm Post subject: |
|
|
prova fare cat /dev/mouse e a girare la rotella...
vedi se sputa qc
ciao _________________ while True:Gentoo() |
|
Back to top |
|
|
Giepi Apprentice
Joined: 29 Sep 2004 Posts: 164 Location: Non pallo, io!
|
Posted: Tue Nov 02, 2004 11:30 pm Post subject: |
|
|
non sputa nulla se muovo la rotella, solo se muovo il mouse _________________ I SEE THE FLASH! THE FLAAASH!
AND YOU INFEDEL WILL DIE!!!
SLEEEPEEER AWAAAKEE!!!
* allucinato * |
|
Back to top |
|
|
koma Advocate
Joined: 06 Jun 2003 Posts: 2702 Location: Italy
|
|
Back to top |
|
|
xchris Advocate
Joined: 10 Jul 2003 Posts: 2824
|
Posted: Wed Nov 03, 2004 10:57 am Post subject: |
|
|
per curiosita'.. e' un fisso o un portatile con touchpad? _________________ while True:Gentoo() |
|
Back to top |
|
|
gutter Bodhisattva
Joined: 13 Mar 2004 Posts: 7162 Location: Aarau, Aargau, Switzerland
|
Posted: Wed Nov 03, 2004 11:01 am Post subject: |
|
|
Prova ad usare come device:
in xorg.conf. _________________ Registered as User #281564 and Machines #163761 |
|
Back to top |
|
|
Giepi Apprentice
Joined: 29 Sep 2004 Posts: 164 Location: Non pallo, io!
|
Posted: Wed Nov 03, 2004 12:40 pm Post subject: |
|
|
Per quanto riguarda altri device... sembrerebbero proprio non leggere l'input della rotella O_O
Code: | brao ~ # cat /dev/psaux
brao ~ # cat /dev/input/mice
brao ~ #
|
e pensare che prima di quel dannato upgrade funzionava
Su windows funziona, non è un problema hw.
é un mouse ottico col filo, Wheel Mouse Optical, della Microsoft Corporation (società mai sentita ) _________________ I SEE THE FLASH! THE FLAAASH!
AND YOU INFEDEL WILL DIE!!!
SLEEEPEEER AWAAAKEE!!!
* allucinato * |
|
Back to top |
|
|
battistis Apprentice
Joined: 20 Jul 2006 Posts: 249
|
Posted: Wed Feb 14, 2007 11:40 am Post subject: |
|
|
mi accodo al post ... stesso problema!
ma nn ho fatto alcun aggiornamento.... help!!!! _________________ \\ba7/ |
|
Back to top |
|
|
crisandbea Veteran
Joined: 03 Jul 2005 Posts: 1778 Location: BOSCO (SA) ... ma domiciliato a Bologna....
|
Posted: Wed Feb 14, 2007 11:49 am Post subject: |
|
|
questa è la mia parte relativa al mouse USB,
Code: | Section "InputDevice"
Identifier "USB mouse"
Driver "mouse"
Option "CorePointer"
Option "Device" "/dev/psaux"
Option "Protocol" "IMPS/2"
Option "ZAxisMapping" "4 5"
EndSection |
verifica di avere queste opzioni abilitate nel kernel:
Code: |
CONFIG_INPUT_MOUSEDEV_PSAUX=y
CONFIG_MOUSE_PS2=y
|
posta un
ciao |
|
Back to top |
|
|
battistis Apprentice
Joined: 20 Jul 2006 Posts: 249
|
Posted: Wed Feb 14, 2007 12:57 pm Post subject: |
|
|
...forse il problema riguarda il mio ultimo aggiornamento di udev
https://forums.gentoo.org/viewtopic-p-3906070.html#3906070
cmq. ecco quello che mi avevi chiesto:
/etc/X11/xorg.conf
Code: |
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "CorePointer"
Option "SendCoreEvents" "true"
Option "Name" "AutoDetected"
Option "Protocol" "auto"
Option "Vendor" "AutoDetected"
# Option "Protocol" "IMPS/2"
Option "Device" "/dev/input/mice"
# Option "Device" "/dev/input/mouse0"
# Option "Emulate3Buttons" "true"
Option "ZAxisMapping" "4 5"
# Option "ZAxisMapping" "4 5 6 7 8 9"
|
come vedi le sto provando tutte
se metto /dev/psaux xorg nn si avvia neanche
nel config del kernel
Code: | # Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
CONFIG_INPUT_MOUSEDEV_PSAUX=y
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1280
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=1024
# CONFIG_INPUT_JOYDEV is not set
# CONFIG_INPUT_TSDEV is not set
CONFIG_INPUT_EVDEV=y
# CONFIG_INPUT_EVBUG is not set
#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
CONFIG_KEYBOARD_ATKBD=y
# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_LKKBD is not set
# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_KEYBOARD_NEWTON is not set
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=y
# CONFIG_MOUSE_SERIAL is not set
# CONFIG_MOUSE_VSXXXAA is not set
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
# CONFIG_INPUT_MISC is not set
|
# dmesg | grep usb
non mi da alcun output
cmq. il mouse nn lo sto usando come usb
ovvero è collegato, tramite adattorino verde USB->PS/2, ad un KVM switch (switch 1crt1tastiera per piu' pc)
e da quello alla PS\2 del pc _________________ \\ba7/ |
|
Back to top |
|
|
Scen Retired Dev
Joined: 29 Jul 2003 Posts: 2470 Location: Padova, Italy
|
Posted: Thu Feb 15, 2007 7:48 am Post subject: |
|
|
Prova a modificare i seguenti parametri in questo modo:
Code: |
Option "Protocol" "PS/2"
Option "Device" "/dev/input/mice"
Option "ZAxisMapping" "4 5 6 7"
|
per fare le prove più agevolmente ti consiglio di spostarti in una console, terminare il server grafico, modificare xorg.conf, e provare con startx.
(anch'io utilizzo un mouse USB con adattatore USB->PS/2 attaccato ad un KVM Switch, dopo controllo per bene il mio xorg.conf e vediamo se ho utilizzato opzioni particolari!) _________________ I was born in a deep forest/I wish I could live here all my life/I am made from stones and roots/My home, these woods and roads
All my life I loved this sound/Of the woods all around/Eagles flies where the winds blows free
Journey is my destiny |
|
Back to top |
|
|
battistis Apprentice
Joined: 20 Jul 2006 Posts: 249
|
Posted: Thu Feb 15, 2007 8:27 am Post subject: |
|
|
Scen wrote: | Prova a modificare i seguenti parametri in questo modo:
Code: |
Option "Protocol" "PS/2"
Option "Device" "/dev/input/mice"
Option "ZAxisMapping" "4 5 6 7"
|
|
ok provo questa combinazione che mi hai dato
Quote: |
per fare le prove più agevolmente ti consiglio di spostarti in una console, terminare il server grafico, modificare xorg.conf, e provare con startx.
|
nn è la stessa cosa /etc/init.d/xdm start|stop ? _________________ \\ba7/ |
|
Back to top |
|
|
Scen Retired Dev
Joined: 29 Jul 2003 Posts: 2470 Location: Padova, Italy
|
Posted: Thu Feb 15, 2007 9:10 am Post subject: |
|
|
battistis wrote: | nn è la stessa cosa /etc/init.d/xdm start|stop ? |
Sì, è la stessa cosa, però se stai usando un login manager (configurato in /etc/conf.d/xdm ) ti viene caricato quando dai start.
Mentre, spostandoti in una console (es. CTRL+ALT+F1), e dando startx avvii solamente il server X con un un xterm, dove fare le prove (anche da root) _________________ I was born in a deep forest/I wish I could live here all my life/I am made from stones and roots/My home, these woods and roads
All my life I loved this sound/Of the woods all around/Eagles flies where the winds blows free
Journey is my destiny |
|
Back to top |
|
|
battistis Apprentice
Joined: 20 Jul 2006 Posts: 249
|
Posted: Fri Feb 16, 2007 9:07 am Post subject: |
|
|
sto facendo le prove con un
# startx -- :1
che mi apre un secondo server grafico (F (0 è il primo: ovvero F7)
cmq. nn so se dipende dai vari paramentri ce ho messo in xorg.conf (nn credo) o dall'aiuto divino ma la rotella ha ripreso a funzionare dopo qualche riavvio della macchina ... boooo
[edit]
e adesso nuovamente non funziona...non ho fatto nessun emerge dopo la brutta esperienza del nuovo udev
...se almeno riuscissi a capire da cosa dipende questo problema ... udev? xorg? coldplug? il mio mouse wireless ... booo
[edit]
simpatica e assurda questa cosa
alternativamente quando la rotella del mouse non funziona decommento la parte 1 e commento dal parte due di Section "InputDevice" nel mio xorg.conf, riavvio e tutto funziona
Code: |
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "CorePointer"
Option "SendCoreEvents" "true"
Option "Name" "AutoDetected"
Option "Vendor" "AutoDetected"
#Parte1
Option "Protocol" "IMPS/2"
Option "Device" "/dev/input/mice"
Option "Emulate3Buttons" "true"
Option "ZAxisMapping" "4 5 6 7 8 9"
#Parte2
# Option "Protocol" "auto"
# Option "Device" "/dev/input/mouse0"
# Option "ZAxisMapping" "4 5"
EndSection
|
_________________ \\ba7/ |
|
Back to top |
|
|
|