Gentoo Forums

kicior

mziab wrote:Co do bt, sam niewiele mogę poradzić. Warto by to wrzucić na mantisa. Deweloperzy Kadu pewnie coś wymyślą. Choć wydaje mi się, że gałąź 0.6.5 jest już na dobrą sprawę martwa.

Problem rozwiązany: http://kadu.net/mantis/view.php?id=1979

kicior

Przekompiluj z debugiem, żeby złapać bardziej użyteczny backtrace.

Odpowiednie flagi możesz ustawić następującym skryptem (wymaga portage-utils):
#!/bin/sh
[ ! -d /etc/portage/env/net-im ] && mkdir -p /etc/portage/env/net-im

for i in $(qlist -I -C net-im/kadu); do
echo 'CFLAGS="-march=native -O2 ...

kicior

Ja właśnie zainstalowałem kadu i coś jest nie tak, bo nie chce startować:
kicior ~ $ kadu

======= BEGIN OF BACKTRACE =====
[0] kadu() [0x47178c]
[1] /lib/libc.so.6(+0x34160) [0x7f131d096160]
[2] /lib/libc.so.6(cfree+0x1d) [0x7f131d0dfaed]
[3] kadu(_ZN11PendingMsgs12loadFromFileEv+0x466) [0x5264a6 ...

kicior

rahulthewall wrote:Suspend and Shutdown are broken with 2.6.37 for me. Works fine with 2.6.36.

I confirm. Shutdown stops after remounting filesystems readonly.

kicior

My libreoffice compiled with nsplugin flag enabled. Maybe something else is wrong

kicior

I've successfully compiled libreoffice yesterday using gcc 4.5.2 on ~amd64.

kicior

radek-s wrote:Podepne sie do tematu.

u mnie po update x'ow na 1.7.1 i sterów nvidii na 190.42-r2
całkowicie padły efekty pulpitu 3D w kde4.
mysz i klawiatura bez problemów

co może być tego powodem?

Może
eselect opengl set nvidia
??

kicior

Mam to samo - pojawiło się wczoraj - nie bardzo potrafię zlokalizować winowajcę na razie.

EDIT:
Winowajcą był glibc: pomógł downgrade z wersji 2.9_p20081201-r1 na 2.9_p20081201.

kicior

I still have hardlocks sometimes with zenmm3 and very often my network is dead (reloading module doesn't help, even ethtool claims there is no link detected - after reboot network is back (module e1000)). rc9-zen1 is working ok, but hdaps is not working: hdaps: IBM ThinkPad R61 detected.
hdaps ...

kicior

rmh3093 wrote:are you on a 64bit box? it seems to be fine on my 32bit system

64bit compiled with CFLAGS="-march=nocona -O2 -pipe -fomit-frame-pointer"

kicior

tranquilcool wrote:with or without zen-tunables set kernel panics and refuses to boot.

I have the same situation: zenmm kernel panic (with and without zen tunables) pure mm1 is booting.

kicior

zen-tunables is not completely optional in the latest push.

Just pull it, and in the zen-tunables menu, if you select CONFIG_ZEN_TUNE=y then it will use the tunable patch, if you select N then it will mask the tunable menu and revert back to the original mm code.

Let me know if that's the problem ...

kicior

cheater1034 wrote:Those of you having errors, please test on 2.6.26-rc8-mm1, it will help tremendously.

2.6.26-rc8-mm1 with the same config is booting (although I can see only euro signs instead of letters after "INIT: version 2.86 booting" message - after enabling ASCII during boot there are letters again).

kicior

cheater1034 wrote:Try disabling cpu-cfs-boost in zen-tunables menu and let me know if that works.

I don't have such an option in zen tunables. I have "Boost privileged tasks" and it is disabled.

kicior

tranquilcool wrote:and then suddenly became ok. dunno, suspect it has something to do with compressed swap.
am just guessing.

After disabling it still no success.

kicior

tranquilcool wrote:did make oldconfig, make clean, make && make modules_install.
then copy the bzIimage and System-map to boot.

It didn't help - still kernel panic.

kicior

tranquilcool wrote:
kicior wrote:well that happened to me several times.
then i 'make clean' compile use 'elevator=deadline' and now kernel is consistent.
i didn't have to recompile nvidia-drivers.
You mean just
Code: Select all
make clean ; make oldconfig
?
And I'm now using deadline.

kicior

Thank you very much - now nvidia compiled but i have kernel panic just after hitting enter in grub.
Here is photo with message: http://hektor.umcs.lublin.pl/~leszeks/panic.jpg

kicior

I have got some error installing nvidia drivers on rc8-zenmm2:
/portage/var/tmp/portage/x11-drivers/nvidia-drivers-177.13/work/NVIDIA-Linux-x86_64-177.13-pkg2/usr/src/nv/os-interface.c:703: error: implicit declaration of function 'kill_proc'
make[3]: *** [/portage/var/tmp/portage/x11-drivers/nvidia ...

kicior

Maybe try

Code: Select all

echo "ln -s /var/run/gdm_socket /tmp/.gdm_socket" >> /etc/conf.d/local.start

and reboot.

kicior

Mam to samo od kiedy przeszedłem na jajko 2.6.17. Pisałem już o tym tutaj kilka razy, ale nic z tego nie wynikło. Zgłaszałem też buga na bugliście tvtime, ale nawet nikt nie raczył odpowiedzieć. Może Tobie się uda coś wybadać - powodzenia.
http://forums.gentoo.org/viewtopic-t-478159-highlight-tvtime ...

kicior

Bluetake BT007SX

kicior

U mnie wystarczyło zapodać

Code: Select all

emerge xorg-server

kicior

Code: Select all

PORTAGE_TMPDIR="/katalog_z_dużą_ilością_miejsca" emerge openoffice

Powinno wystarczyć.

kicior

I have Aver TVPhone98 and I also had problem with lirc_gpio module. Now I'm using evdev and my remote works again. What I did:
cat /etc/conf.d/lircd
LIRCD_OPTS="-H dev/input -d /dev/input/event3"
cat /etc/make.conf|grep LIRC_DEVICES
LIRC_DEVICES="avermedia98 creative devinput inputlirc userspace ...

Search found 179 matches