Gentoo Forums
Gentoo Forums
Gentoo Forums
Quick Search: in
Radeon and X config [SOLVED]
View unanswered posts
View posts from last 24 hours
View posts from last 7 days

Goto page 1, 2  Next  
Reply to topic    Gentoo Forums Forum Index Desktop Environments
View previous topic :: View next topic  
Author Message
KShots
Guru
Guru


Joined: 09 Oct 2003
Posts: 589
Location: Florida

PostPosted: Fri Oct 24, 2003 8:08 pm    Post subject: Radeon and X config [SOLVED] Reply with quote

I'm sorry, I realize this has probably been posted before, but I'm finding it terribly difficult to navigate around in Lynx. Here's my problem:

I've got a Radeon 9800 Pro and have emerged "ati-drivers". At the tail end of the emerge, it suggested I run "fglrxconfig" to create a XFree86config-4 (sp?) file. I have no such program and can't seem to emerge it. Is there any help on this? (I just finished compiling KDE after about 10 hours of straight compiles...)
_________________
Life without passion is death in disguise


Last edited by KShots on Fri Jun 24, 2005 2:33 pm; edited 1 time in total
Back to top
View user's profile Send private message
KShots
Guru
Guru


Joined: 09 Oct 2003
Posts: 589
Location: Florida

PostPosted: Fri Oct 24, 2003 8:17 pm    Post subject: Reply with quote

Well... That is rather seriously odd... I decided to try to emerge "ati-drivers" again, and now I have the fglrxconfig utility. Please disregard the above :)
_________________
Life without passion is death in disguise
Back to top
View user's profile Send private message
KShots
Guru
Guru


Joined: 09 Oct 2003
Posts: 589
Location: Florida

PostPosted: Fri Oct 24, 2003 8:47 pm    Post subject: Reply with quote

ARGH!! OK, I've now run the fglrxconfig program and upon running "startx", I get the following error:

(I can't cut & paste in this console environment, so bear with me)
Using vt 7(II) Primary Device is: PCI 01:05:0
(EE) No devices detected.

Fatal server error:
no screens found
_________________
Life without passion is death in disguise
Back to top
View user's profile Send private message
pjp
Administrator
Administrator


Joined: 16 Apr 2002
Posts: 20039

PostPosted: Fri Oct 24, 2003 10:50 pm    Post subject: Reply with quote

Moved from Installing Gentoo.
_________________
Quis separabit? Quo animo?
Back to top
View user's profile Send private message
KShots
Guru
Guru


Joined: 09 Oct 2003
Posts: 589
Location: Florida

PostPosted: Sat Oct 25, 2003 12:33 pm    Post subject: Reply with quote

Is there a solution to this or am I only going to be using the console?

EDIT: OK, I've got a temporary solution up... My Radeon 9800 Pro is now using the "vesa" driver, and now X starts. In fact, I'm writing this from KDE.

I'd like to be able to use the radeon's drivers, though... Vesa's not much fun for OGL development
_________________
Life without passion is death in disguise
Back to top
View user's profile Send private message
Wedge_
Advocate
Advocate


Joined: 08 Aug 2002
Posts: 3614
Location: Scotland

PostPosted: Sat Oct 25, 2003 1:39 pm    Post subject: Reply with quote

Quote:
Using vt 7(II) Primary Device is: PCI 01:05:0

Is that right? Can you post the output of "lspci" and "dmesg"?
_________________
Per Ardua Ad Astra
The Earth is the cradle of the mind, but we cannot live forever in a cradle - Konstantin E. Tsiolkovsky
Gentoo Radeon FAQ
Back to top
View user's profile Send private message
Diorf
n00b
n00b


Joined: 05 Jun 2003
Posts: 52
Location: Paris

PostPosted: Sat Oct 25, 2003 1:59 pm    Post subject: Reply with quote

the fglrxconfig is in /opt/ati/bin
Back to top
View user's profile Send private message
KShots
Guru
Guru


Joined: 09 Oct 2003
Posts: 589
Location: Florida

PostPosted: Sat Oct 25, 2003 2:31 pm    Post subject: Reply with quote

Wedge_ wrote:
Quote:
Using vt 7(II) Primary Device is: PCI 01:05:0

Is that right? Can you post the output of "lspci" and "dmesg"?
Sure. Here's the output of lspci
Code:
root@basilisk rich # lspci
00:00.0 Host bridge: Advanced Micro Devices [AMD] AMD-760 MP [IGD4-2P] System Controller (rev 11)
00:01.0 PCI bridge: Advanced Micro Devices [AMD] AMD-760 MP [IGD4-2P] AGP Bridge
00:07.0 ISA bridge: Advanced Micro Devices [AMD] AMD-768 [Opus] ISA (rev 05)
00:07.1 IDE interface: Advanced Micro Devices [AMD] AMD-768 [Opus] IDE (rev 04)
00:07.3 Bridge: Advanced Micro Devices [AMD] AMD-768 [Opus] ACPI (rev 03)
00:10.0 PCI bridge: Advanced Micro Devices [AMD] AMD-768 [Opus] PCI (rev 05)
01:05.0 VGA compatible controller: ATI Technologies Inc Radeon R350 [Radeon 9800]
01:05.1 Display controller: ATI Technologies Inc Radeon R350 [Radeon 9800] (Secondary)
02:00.0 USB Controller: Advanced Micro Devices [AMD] AMD-768 [Opus] USB (rev 07)
02:04.0 Ethernet controller: Intel Corp. 82557/8/9 [Ethernet Pro 100] (rev 02)
02:06.0 Multimedia audio controller: Creative Labs SB Audigy (rev 03)
02:06.1 Input device controller: Creative Labs SB Audigy MIDI/Game port (rev 03)
02:06.2 FireWire (IEEE 1394): Creative Labs SB Audigy FireWire Port
And dmesg:
Code:
root@basilisk rich # dmesg
Linux version 2.4.20-gaming-r3 (root@basilisk) (gcc version 3.2.3 20030422 (Gentoo Linux 1.4 3.2.3-r2, propolice)) #4 SMP Fri Oct 24 17:34:57 EDT 2003
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
 BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
 BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 000000001fff0000 (usable)
 BIOS-e820: 000000001fff0000 - 000000001fff3000 (ACPI NVS)
 BIOS-e820: 000000001fff3000 - 0000000020000000 (ACPI data)
 BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
511MB LOWMEM available.
found SMP MP-table at 000f4b00
hm, page 000f4000 reserved twice.
hm, page 000f5000 reserved twice.
hm, page 000f1000 reserved twice.
hm, page 000f2000 reserved twice.
On node 0 totalpages: 131056
zone(0): 4096 pages.
zone(1): 126960 pages.
zone(2): 0 pages.
Intel MultiProcessor Specification v1.4
    Virtual Wire compatibility mode.
OEM ID: OEM00000 Product ID: PROD00000000 APIC at: 0xFEE00000
Processor #0 Pentium(tm) Pro APIC version 17
Processor #1 Pentium(tm) Pro APIC version 17
I/O APIC #2 Version 17 at 0xFEC00000.
Processors: 2
Kernel command line: root=/dev/hdb7 vga=795
Initializing CPU#0
Detected 1666.732 MHz processor.
Console: colour dummy device 80x25
Calibrating delay loop... 3322.67 BogoMIPS
Memory: 511136k/524224k available (1614k kernel code, 8480k reserved, 545k data, 124k init, 0k highmem)
Dentry cache hash table entries: 65536 (order: 7, 524288 bytes)
Inode cache hash table entries: 32768 (order: 6, 262144 bytes)
Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
Buffer-cache hash table entries: 32768 (order: 5, 131072 bytes)
Page-cache hash table entries: 131072 (order: 7, 524288 bytes)
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 256K (64 bytes/line)
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU:     After generic, caps: 0383fbff c1cbfbff 00000000 00000000
CPU:             Common caps: 0383fbff c1cbfbff 00000000 00000000
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 256K (64 bytes/line)
Intel machine check reporting enabled on CPU#0.
CPU:     After generic, caps: 0383fbff c1cbfbff 00000000 00000000
CPU:             Common caps: 0383fbff c1cbfbff 00000000 00000000
CPU0: AMD Athlon(tm) MP 2000+ stepping 01
per-CPU timeslice cutoff: 731.44 usecs.
task migration cache decay timeout: 10 msecs.
enabled ExtINT on CPU#0
ESR value before enabling vector: 00000000
ESR value after enabling vector: 00000000
Booting processor 1/1 eip 2000
Initializing CPU#1
masked ExtINT on CPU#1
ESR value before enabling vector: 00000000
ESR value after enabling vector: 00000000
Calibrating delay loop... 3329.22 BogoMIPS
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 256K (64 bytes/line)
Intel machine check reporting enabled on CPU#1.
CPU:     After generic, caps: 0383fbff c1cbfbff 00000000 00000000
CPU:             Common caps: 0383fbff c1cbfbff 00000000 00000000
CPU1: AMD Athlon(tm) MP stepping 01
Total of 2 processors activated (6651.90 BogoMIPS).
ENABLING IO-APIC IRQs
Setting 2 in the phys_id_present_map
...changing IO-APIC physical APIC ID to 2 ... ok.
init IO_APIC IRQs
 IO-APIC (apicid-pin) 2-0, 2-5, 2-10, 2-11, 2-20, 2-21, 2-22, 2-23 not connected.
..TIMER: vector=0x31 pin1=2 pin2=0
number of MP IRQ sources: 18.
number of IO-APIC #2 registers: 24.
testing the IO APIC.......................

IO APIC #2......
.... register #00: 02000000
.......    : physical APIC id: 02
.... register #01: 00170011
.......     : max redirection entries: 0017
.......     : PRQ implemented: 0
.......     : IO APIC version: 0011
.... register #02: 00000000
.......     : arbitration: 00
.... IRQ redirection table:
 NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect:
 00 000 00  1    0    0   0   0    0    0    00
 01 003 03  0    0    0   0   0    1    1    39
 02 003 03  0    0    0   0   0    1    1    31
 03 003 03  0    0    0   0   0    1    1    41
 04 003 03  0    0    0   0   0    1    1    49
 05 000 00  1    0    0   0   0    0    0    00
 06 003 03  0    0    0   0   0    1    1    51
 07 003 03  0    0    0   0   0    1    1    59
 08 003 03  0    0    0   0   0    1    1    61
 09 003 03  0    0    0   0   0    1    1    69
 0a 000 00  1    0    0   0   0    0    0    00
 0b 000 00  1    0    0   0   0    0    0    00
 0c 003 03  0    0    0   0   0    1    1    71
 0d 003 03  0    0    0   0   0    1    1    79
 0e 003 03  0    0    0   0   0    1    1    81
 0f 003 03  0    0    0   0   0    1    1    89
 10 003 03  1    1    0   1   0    1    1    91
 11 003 03  1    1    0   1   0    1    1    99
 12 003 03  1    1    0   1   0    1    1    A1
 13 003 03  1    1    0   1   0    1    1    A9
 14 000 00  1    0    0   0   0    0    0    00
 15 000 00  1    0    0   0   0    0    0    00
 16 000 00  1    0    0   0   0    0    0    00
 17 000 00  1    0    0   0   0    0    0    00
IRQ to pin mappings:
IRQ0 -> 0:2
IRQ1 -> 0:1
IRQ3 -> 0:3
IRQ4 -> 0:4
IRQ6 -> 0:6
IRQ7 -> 0:7
IRQ8 -> 0:8
IRQ9 -> 0:9
IRQ12 -> 0:12
IRQ13 -> 0:13
IRQ14 -> 0:14
IRQ15 -> 0:15
IRQ16 -> 0:16
IRQ17 -> 0:17
IRQ18 -> 0:18
IRQ19 -> 0:19
.................................... done.
Using local APIC timer interrupts.
calibrating APIC timer ...
..... CPU clock speed is 1666.7844 MHz.
..... host bus clock speed is 266.6851 MHz.
cpu: 0, clocks: 2666851, slice: 888950
CPU0<T0:2666848,T1:1777888,D:10,S:888950,C:2666851>
cpu: 1, clocks: 2666851, slice: 888950
CPU1<T0:2666848,T1:888944,D:4,S:888950,C:2666851>
checking TSC synchronization across CPUs: passed.
migration_task 0 on cpu=0
migration_task 1 on cpu=1
PCI: PCI BIOS revision 2.10 entry at 0xfb130, last bus=2
PCI: Using configuration type 1
PCI: Probing PCI hardware
PCI: Probing PCI hardware (bus 00)
PCI: Using IRQ router default [1022/700c] at 00:00.0
PCI->APIC IRQ transform: (B1,I5,P0) -> 17
PCI->APIC IRQ transform: (B2,I0,P3) -> 19
PCI->APIC IRQ transform: (B2,I4,P0) -> 16
PCI->APIC IRQ transform: (B2,I6,P0) -> 18
PCI->APIC IRQ transform: (B2,I6,P1) -> 19
BIOS failed to enable PCI standards compliance, fixing this error.
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x1
NTFS driver v1.1.22 [Flags: R/O]
parport0: PC-style at 0x378 [PCSPP(,...)]
vesafb: framebuffer at 0xe0000000, mapped to 0xe0800000, size 131072k
vesafb: mode is 1280x1024x24, linelength=3840, pages=33
vesafb: protected mode interface info at c000:5710
vesafb: scrolling: redraw
vesafb: directcolor: size=0:8:8:8, shift=0:16:8:0
Console: switching to colour frame buffer device 160x64
fb0: VESA VGA frame buffer device
pty: 256 Unix98 ptys configured
Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI enabled
ttyS00 at 0x03f8 (irq = 4) is a 16550A
ttyS01 at 0x02f8 (irq = 3) is a 16550A
amd768_rng: AMD768 system management I/O registers at 0x600.
amd768_rng hardware driver 0.1.0 loaded
Uniform Multi-Platform E-IDE driver Revision: 6.31
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
AMD7441: IDE controller on PCI bus 00 dev 39
AMD7441: chipset revision 4
AMD7441: not 100% native mode: will probe irqs later
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
AMD_IDE: Advanced Micro Devices [AMD] AMD-768 [Opus] IDE (rev 04) UDMA100 controller on pci00:07.1
    ide0: BM-DMA at 0xe000-0xe007, BIOS settings: hda:DMA, hdb:DMA
    ide1: BM-DMA at 0xe008-0xe00f, BIOS settings: hdc:pio, hdd:DMA
hda: SAMSUNG SP1203N, ATA DISK drive
hdb: WDC WD600AB-00BVA0, ATA DISK drive
hdd: CREATIVE DVD-ROM DVD6240E, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
blk: queue c03a47e4, I/O limit 4095Mb (mask 0xffffffff)
hda: 234493056 sectors (120060 MB) w/2048KiB Cache, CHS=14596/255/63, UDMA(100)
blk: queue c03a4934, I/O limit 4095Mb (mask 0xffffffff)
hdb: 117231408 sectors (60022 MB) w/2048KiB Cache, CHS=7297/255/63, UDMA(100)
hdd: ATAPI 24X DVD-ROM drive, 512kB Cache, DMA
Uniform CD-ROM driver Revision: 3.12
Partition check:
 /dev/ide/host0/bus0/target0/lun0: p1 p2 < p5 >
 /dev/ide/host0/bus0/target1/lun0: p1 p2 p3 < p5 p6 p7 > p4
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
eepro100.c:v1.09j-t 9/29/99 Donald Becker http://www.scyld.com/network/eepro100.html
eepro100.c: $Revision: 1.36 $ 2000/11/17 Modified by Andrey V. Savochkin <saw@saw.sw.com.sg> and others
eth0: Intel Corp. 82557/8/9 [Ethernet Pro 100], 00:A0:C9:B8:1B:A1, IRQ 16.
  Receiver lock-up bug exists -- enabling work-around.
  Board assembly 678400-001, Physical connectors present: RJ45
  Primary interface chip i82555 PHY #1.
  General self-test: passed.
  Serial sub-system self-test: passed.
  Internal registers self-test: passed.
  ROM checksum self-test: passed (0x49caa8d6).
  Receiver lock-up workaround activated.
Linux agpgart interface v0.99 (c) Jeff Hartmann
agpgart: Maximum main memory to use for agp memory: 439M
agpgart: Detected AMD 760MP chipset
agpgart: AGP aperture is 128M @ 0xd8000000
[drm] AGP 0.99 on AMD Irongate @ 0xd8000000 128MB
[drm] Initialized radeon 1.1.1 20010405 on minor 0
usb.c: registered new driver hub
uhci.c: USB Universal Host Controller Interface driver v1.1
usb.c: registered new driver hid
hid-core.c: v1.8.1 Andreas Gal, Vojtech Pavlik <vojtech@suse.cz>
hid-core.c: USB HID support drivers
usb.c: registered new driver usblp
printer.c: v0.11: USB Printer Device Class driver
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 4096 buckets, 32Kbytes
TCP: Hash tables configured (established 32768 bind 32768)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
FAT: bogus logical sector size 0
FAT: bogus logical sector size 0
kmod: failed to exec /sbin/modprobe -s -k nls_iso8859-1, errno = 2
reiserfs: checking transaction log (device 03:47) ...
Using r5 hash to sort names
ReiserFS version 3.6.25
VFS: Mounted root (reiserfs filesystem) readonly.
Mounted devfs on /dev
Freeing unused kernel memory: 124k freed
Adding Swap: 996020k swap-space (priority -1)
Real Time Clock Driver v1.10e
reiserfs: checking transaction log (device 03:42) ...
Using r5 hash to sort names
ReiserFS version 3.6.25
reiserfs: checking transaction log (device 03:45) ...
Using r5 hash to sort names
ReiserFS version 3.6.25
reiserfs: checking transaction log (device 03:46) ...
Using r5 hash to sort names
ReiserFS version 3.6.25
blk: queue c03a47e4, I/O limit 4095Mb (mask 0xffffffff)
blk: queue c03a4934, I/O limit 4095Mb (mask 0xffffffff)
hdd: drive_cmd: status=0x51 { DriveReady SeekComplete Error }
hdd: drive_cmd: error=0x04
hdd: drive_cmd: status=0x51 { DriveReady SeekComplete Error }
hdd: drive_cmd: error=0x04
[quote="Diorf"]
Quote:
the fglrxconfig is in /opt/ati/bin
OK, I found it after I emerged it the second time too... after using it, though, it made an XFree86config-4 file that didn't work... acted like it couldn't find a supported card, I think
_________________
Life without passion is death in disguise
Back to top
View user's profile Send private message
Wedge_
Advocate
Advocate


Joined: 08 Aug 2002
Posts: 3614
Location: Scotland

PostPosted: Sat Oct 25, 2003 3:03 pm    Post subject: Reply with quote

OK, that ID is correct, it just looked a bit unusual :)

From your dmesg:
Code:
[drm] AGP 0.99 on AMD Irongate @ 0xd8000000 128MB
[drm] Initialized radeon 1.1.1 20010405 on minor 0

This means you have DRM support in your kernel, which will prevent the ATI driver from working. Recompile your kernel with no DRM support at all, and compile AGP support as a module. Once you've done that, emerge the drivers again, then do "modprobe agpgart" followed by "modprobe fglrx". Then run "fglrxconfig" again and see what happens. If it doesn't work, post your XFree logfile (/var/log/XFree86.0.log).
_________________
Per Ardua Ad Astra
The Earth is the cradle of the mind, but we cannot live forever in a cradle - Konstantin E. Tsiolkovsky
Gentoo Radeon FAQ
Back to top
View user's profile Send private message
KShots
Guru
Guru


Joined: 09 Oct 2003
Posts: 589
Location: Florida

PostPosted: Mon Oct 27, 2003 1:02 am    Post subject: Reply with quote

Wedge_ wrote:
OK, that ID is correct, it just looked a bit unusual :)

From your dmesg:
Code:
[drm] AGP 0.99 on AMD Irongate @ 0xd8000000 128MB
[drm] Initialized radeon 1.1.1 20010405 on minor 0

This means you have DRM support in your kernel, which will prevent the ATI driver from working. Recompile your kernel with no DRM support at all, and compile AGP support as a module. Once you've done that, emerge the drivers again, then do "modprobe agpgart" followed by "modprobe fglrx". Then run "fglrxconfig" again and see what happens. If it doesn't work, post your XFree logfile (/var/log/XFree86.0.log).


Argh... same results, but here's the new stuff (dmesg again):
Code:
code@basilisk code $ dmesg
Linux version 2.4.20-gaming-r3 (root@cdimage) (gcc version 3.2.3 20030422 (Gentoo Linux 1.4 3.2.3-r2, propolice)) #8 SMP Sun Oct 26 14:41:26 EST 2003
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
 BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
 BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 000000001fff0000 (usable)
 BIOS-e820: 000000001fff0000 - 000000001fff3000 (ACPI NVS)
 BIOS-e820: 000000001fff3000 - 0000000020000000 (ACPI data)
 BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
511MB LOWMEM available.
found SMP MP-table at 000f4b00
hm, page 000f4000 reserved twice.
hm, page 000f5000 reserved twice.
hm, page 000f1000 reserved twice.
hm, page 000f2000 reserved twice.
On node 0 totalpages: 131056
zone(0): 4096 pages.
zone(1): 126960 pages.
zone(2): 0 pages.
Intel MultiProcessor Specification v1.4
    Virtual Wire compatibility mode.
OEM ID: OEM00000 Product ID: PROD00000000 APIC at: 0xFEE00000
Processor #0 Pentium(tm) Pro APIC version 17
Processor #1 Pentium(tm) Pro APIC version 17
I/O APIC #2 Version 17 at 0xFEC00000.
Processors: 2
Kernel command line: root=/dev/hdb7 video=vesa:ywrap,mtrr vga=0x31B
Initializing CPU#0
Detected 1666.767 MHz processor.
Console: colour dummy device 80x25
Calibrating delay loop... 3322.67 BogoMIPS
Memory: 510896k/524224k available (1452k kernel code, 8720k reserved, 514k data, 128k init, 0k highmem)
Dentry cache hash table entries: 65536 (order: 7, 524288 bytes)
Inode cache hash table entries: 32768 (order: 6, 262144 bytes)
Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
Buffer-cache hash table entries: 32768 (order: 5, 131072 bytes)
Page-cache hash table entries: 131072 (order: 7, 524288 bytes)
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 256K (64 bytes/line)
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU:     After generic, caps: 0383fbff c1cbfbff 00000000 00000000
CPU:             Common caps: 0383fbff c1cbfbff 00000000 00000000
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au)
mtrr: detected mtrr type: Intel
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 256K (64 bytes/line)
Intel machine check reporting enabled on CPU#0.
CPU:     After generic, caps: 0383fbff c1cbfbff 00000000 00000000
CPU:             Common caps: 0383fbff c1cbfbff 00000000 00000000
CPU0: AMD Athlon(tm) MP 2000+ stepping 01
per-CPU timeslice cutoff: 731.44 usecs.
task migration cache decay timeout: 10 msecs.
enabled ExtINT on CPU#0
ESR value before enabling vector: 00000000
ESR value after enabling vector: 00000000
Booting processor 1/1 eip 2000
Initializing CPU#1
masked ExtINT on CPU#1
ESR value before enabling vector: 00000000
ESR value after enabling vector: 00000000
Calibrating delay loop... 3329.22 BogoMIPS
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 256K (64 bytes/line)
Intel machine check reporting enabled on CPU#1.
CPU:     After generic, caps: 0383fbff c1cbfbff 00000000 00000000
CPU:             Common caps: 0383fbff c1cbfbff 00000000 00000000
CPU1: AMD Athlon(tm) MP stepping 01
Total of 2 processors activated (6651.90 BogoMIPS).
ENABLING IO-APIC IRQs
Setting 2 in the phys_id_present_map
...changing IO-APIC physical APIC ID to 2 ... ok.
init IO_APIC IRQs
 IO-APIC (apicid-pin) 2-0, 2-5, 2-10, 2-11, 2-20, 2-21, 2-22, 2-23 not connected.
..TIMER: vector=0x31 pin1=2 pin2=0
number of MP IRQ sources: 18.
number of IO-APIC #2 registers: 24.
testing the IO APIC.......................

IO APIC #2......
.... register #00: 02000000
.......    : physical APIC id: 02
.... register #01: 00170011
.......     : max redirection entries: 0017
.......     : PRQ implemented: 0
.......     : IO APIC version: 0011
.... register #02: 00000000
.......     : arbitration: 00
.... IRQ redirection table:
 NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect:
 00 000 00  1    0    0   0   0    0    0    00
 01 003 03  0    0    0   0   0    1    1    39
 02 003 03  0    0    0   0   0    1    1    31
 03 003 03  0    0    0   0   0    1    1    41
 04 003 03  0    0    0   0   0    1    1    49
 05 000 00  1    0    0   0   0    0    0    00
 06 003 03  0    0    0   0   0    1    1    51
 07 003 03  0    0    0   0   0    1    1    59
 08 003 03  0    0    0   0   0    1    1    61
 09 003 03  0    0    0   0   0    1    1    69
 0a 000 00  1    0    0   0   0    0    0    00
 0b 000 00  1    0    0   0   0    0    0    00
 0c 003 03  0    0    0   0   0    1    1    71
 0d 003 03  0    0    0   0   0    1    1    79
 0e 003 03  0    0    0   0   0    1    1    81
 0f 003 03  0    0    0   0   0    1    1    89
 10 003 03  1    1    0   1   0    1    1    91
 11 003 03  1    1    0   1   0    1    1    99
 12 003 03  1    1    0   1   0    1    1    A1
 13 003 03  1    1    0   1   0    1    1    A9
 14 000 00  1    0    0   0   0    0    0    00
 15 000 00  1    0    0   0   0    0    0    00
 16 000 00  1    0    0   0   0    0    0    00
 17 000 00  1    0    0   0   0    0    0    00
IRQ to pin mappings:
IRQ0 -> 0:2
IRQ1 -> 0:1
IRQ3 -> 0:3
IRQ4 -> 0:4
IRQ6 -> 0:6
IRQ7 -> 0:7
IRQ8 -> 0:8
IRQ9 -> 0:9
IRQ12 -> 0:12
IRQ13 -> 0:13
IRQ14 -> 0:14
IRQ15 -> 0:15
IRQ16 -> 0:16
IRQ17 -> 0:17
IRQ18 -> 0:18
IRQ19 -> 0:19
.................................... done.
Using local APIC timer interrupts.
calibrating APIC timer ...
..... CPU clock speed is 1666.6839 MHz.
..... host bus clock speed is 266.6691 MHz.
cpu: 0, clocks: 2666691, slice: 888897
CPU0<T0:2666688,T1:1777776,D:15,S:888897,C:2666691>
cpu: 1, clocks: 2666691, slice: 888897
CPU1<T0:2666688,T1:888880,D:14,S:888897,C:2666691>
checking TSC synchronization across CPUs: passed.
migration_task 0 on cpu=0
migration_task 1 on cpu=1
mtrr: your CPUs had inconsistent fixed MTRR settings
mtrr: probably your BIOS does not setup all CPUs
PCI: PCI BIOS revision 2.10 entry at 0xfb130, last bus=2
PCI: Using configuration type 1
PCI: Probing PCI hardware
PCI: Probing PCI hardware (bus 00)
PCI: Using IRQ router default [1022/700c] at 00:00.0
PCI->APIC IRQ transform: (B1,I5,P0) -> 17
PCI->APIC IRQ transform: (B2,I0,P3) -> 19
PCI->APIC IRQ transform: (B2,I4,P0) -> 16
PCI->APIC IRQ transform: (B2,I6,P0) -> 18
PCI->APIC IRQ transform: (B2,I6,P1) -> 19
BIOS failed to enable PCI standards compliance, fixing this error.
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x1
parport0: PC-style at 0x378 [PCSPP(,...)]
vesafb: framebuffer at 0xe0000000, mapped to 0xe0800000, size 131072k
vesafb: mode is 1280x1024x24, linelength=3840, pages=33
vesafb: protected mode interface info at c000:5710
vesafb: pmi: set display start = c00c57a4, set palette = c00c57f0
vesafb: pmi: ports = c010 c016 c054 c038 c03c c05c c000 c004 c0b0 c0b2 c0b4
vesafb: scrolling: ywrap using protected mode interface, yres_virtual=34952
vesafb: directcolor: size=0:8:8:8, shift=0:16:8:0
Console: switching to colour frame buffer device 160x64
fb0: VESA VGA frame buffer device
pty: 256 Unix98 ptys configured
Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI enabled
ttyS00 at 0x03f8 (irq = 4) is a 16550A
ttyS01 at 0x02f8 (irq = 3) is a 16550A
amd768_rng: AMD768 system management I/O registers at 0x600.
amd768_rng hardware driver 0.1.0 loaded
Uniform Multi-Platform E-IDE driver Revision: 6.31
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
AMD7441: IDE controller on PCI bus 00 dev 39
AMD7441: chipset revision 4
AMD7441: not 100% native mode: will probe irqs later
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
AMD_IDE: Advanced Micro Devices [AMD] AMD-768 [Opus] IDE (rev 04) UDMA100 controller on pci00:07.1
    ide0: BM-DMA at 0xe000-0xe007, BIOS settings: hda:DMA, hdb:DMA
    ide1: BM-DMA at 0xe008-0xe00f, BIOS settings: hdc:pio, hdd:DMA
hda: SAMSUNG SP1203N, ATA DISK drive
hdb: WDC WD600AB-00BVA0, ATA DISK drive
hdd: CREATIVE DVD-ROM DVD6240E, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
blk: queue c0374fc4, I/O limit 4095Mb (mask 0xffffffff)
hda: 234493056 sectors (120060 MB) w/2048KiB Cache, CHS=14596/255/63, UDMA(100)
blk: queue c0375114, I/O limit 4095Mb (mask 0xffffffff)
hdb: 117231408 sectors (60022 MB) w/2048KiB Cache, CHS=7297/255/63, UDMA(100)
hdd: ATAPI 24X DVD-ROM drive, 512kB Cache, DMA
Uniform CD-ROM driver Revision: 3.12
Partition check:
 /dev/ide/host0/bus0/target0/lun0: p1 p2 < p5 >
 /dev/ide/host0/bus0/target1/lun0: p1 p2 p3 < p5 p6 p7 > p4
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
loop: loaded (max 8 devices)
eepro100.c:v1.09j-t 9/29/99 Donald Becker http://www.scyld.com/network/eepro100.html
eepro100.c: $Revision: 1.36 $ 2000/11/17 Modified by Andrey V. Savochkin <saw@saw.sw.com.sg> and others
eth0: Intel Corp. 82557/8/9 [Ethernet Pro 100], 00:A0:C9:B8:1B:A1, IRQ 16.
  Receiver lock-up bug exists -- enabling work-around.
  Board assembly 678400-001, Physical connectors present: RJ45
  Primary interface chip i82555 PHY #1.
  General self-test: passed.
  Serial sub-system self-test: passed.
  Internal registers self-test: passed.
  ROM checksum self-test: passed (0x49caa8d6).
  Receiver lock-up workaround activated.
usb.c: registered new driver hub
uhci.c: USB Universal Host Controller Interface driver v1.1
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 4096 buckets, 32Kbytes
TCP: Hash tables configured (established 32768 bind 32768)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
RAMDISK: Couldn't find valid RAM disk image starting at 0.
Freeing initrd memory: 404k freed
reiserfs: checking transaction log (device 03:47) ...
Using r5 hash to sort names
ReiserFS version 3.6.25
VFS: Mounted root (reiserfs filesystem) readonly.
Mounted devfs on /dev
Freeing unused kernel memory: 128k freed
Adding Swap: 996020k swap-space (priority -1)
Real Time Clock Driver v1.10e
Linux agpgart interface v0.99 (c) Jeff Hartmann
agpgart: Maximum main memory to use for agp memory: 439M
agpgart: Detected AMD 760MP chipset
agpgart: AGP aperture is 128M @ 0xd8000000
NTFS driver v1.1.22 [Flags: R/O MODULE]
usb.c: registered new driver usblp
printer.c: v0.11: USB Printer Device Class driver
reiserfs: checking transaction log (device 03:42) ...
Using r5 hash to sort names
ReiserFS version 3.6.25
reiserfs: checking transaction log (device 03:45) ...
Using r5 hash to sort names
ReiserFS version 3.6.25
reiserfs: checking transaction log (device 03:46) ...
Using r5 hash to sort names
ReiserFS version 3.6.25
blk: queue c0374fc4, I/O limit 4095Mb (mask 0xffffffff)
blk: queue c0375114, I/O limit 4095Mb (mask 0xffffffff)
hdd: drive_cmd: status=0x51 { DriveReady SeekComplete Error }
hdd: drive_cmd: error=0x04
hdd: drive_cmd: status=0x51 { DriveReady SeekComplete Error }
hdd: drive_cmd: error=0x04
[fglrx] Maximum main memory to use for locked dma buffers: 431 MBytes.
[fglrx] module loaded - fglrx 2.9.12 [May  9 2003] on minor 0
code@basilisk code $
And here's my log file:
Code:
XFree86 Version 4.3.0
Release Date: 27 February 2003
X Protocol Version 11, Revision 0, Release 6.6
Build Operating System: Linux 2.4.20-gaming-r3 i686 [ELF]
Build Date: 23 October 2003
   Before reporting problems, check http://www.XFree86.Org/
   to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
         (++) from command line, (!!) notice, (II) informational,
         (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/XFree86.0.log", Time: Sun Oct 26 19:54:36 2003
(==) Using config file: "/etc/X11/XF86Config-4"
(==) ServerLayout "Server Layout"
(**) |-->Screen "Screen0" (0)
(**) |   |-->Monitor "Monitor0"
(**) |   |-->Device "ATI Graphics Adapter"
(**) |-->Input Device "Mouse1"
(**) |-->Input Device "Keyboard1"
(**) Option "AutoRepeat" "500 30"
(**) Option "XkbRules" "xfree86"
(**) XKB: rules: "xfree86"
(**) Option "XkbModel" "pc101"
(**) XKB: model: "pc101"
(**) Option "XkbLayout" "us"
(**) XKB: layout: "us"
(==) Keyboard: CustomKeycode disabled
(**) FontPath set to "/usr/X11R6/lib/X11/fonts/local/,/usr/X11R6/lib/X11/fonts/misc/,/usr/X11R6/lib/X11/fonts/75dpi/:unscaled,/usr/X11R6/lib/X11/fonts/100dpi/:unscaled,/usr/X11R6/lib/X11/fonts/Type1/,/usr/X11R6/lib/X11/fonts/Speedo/,/usr/X11R6/lib/X11/fonts/75dpi/,/usr/X11R6/lib/X11/fonts/100dpi/"
(**) RgbPath set to "/usr/X11R6/lib/X11/rgb"
Using vt 7
(--) using VT number 7

(WW) Open APM failed (/dev/apm_bios) (No such file or directory)
(II) PCI: Probing config type using method 1
(II) PCI: Config type is 1
(II) PCI: stages = 0x03, oldVal1 = 0x8001282c, mode1Res1 = 0x80000000
(II) PCI: PCI scan (all values are in hex)
(II) PCI: 00:00:0: chip 1022,700c card 0000,0000 rev 11 class 06,00,00 hdr 00
(II) PCI: 00:01:0: chip 1022,700d card 0000,0000 rev 00 class 06,04,00 hdr 01
(II) PCI: 00:07:0: chip 1022,7440 card 0000,0000 rev 05 class 06,01,00 hdr 80
(II) PCI: 00:07:1: chip 1022,7441 card 1022,7441 rev 04 class 01,01,8a hdr 00
(II) PCI: 00:07:3: chip 1022,7443 card 1022,7443 rev 03 class 06,80,00 hdr 00
(II) PCI: 00:10:0: chip 1022,7448 card 0000,0000 rev 05 class 06,04,00 hdr 01
(II) PCI: 01:05:0: chip 1002,4e48 card 1002,0002 rev 00 class 03,00,00 hdr 80
(II) PCI: 01:05:1: chip 1002,4e68 card 1002,0003 rev 00 class 03,80,00 hdr 00
(II) PCI: 02:00:0: chip 1022,7449 card 0000,0000 rev 07 class 0c,03,10 hdr 00
(II) PCI: 02:04:0: chip 8086,1229 card 8086,0001 rev 02 class 02,00,00 hdr 00
(II) PCI: 02:06:0: chip 1102,0004 card 1102,0051 rev 03 class 04,01,00 hdr 80
(II) PCI: 02:06:1: chip 1102,7003 card 1102,0040 rev 03 class 09,80,00 hdr 80
(II) PCI: 02:06:2: chip 1102,4001 card 1102,0010 rev 00 class 0c,00,10 hdr 80
(II) PCI: End of PCI scan
(II) Host-to-PCI bridge:
(II) Bus 0: bridge is at (0:0:0), (0,0,2), BCTRL: 0x0008 (VGA_EN is set)
(II) Bus 0 I/O range:
   [0] -1   0   0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) Bus 0 non-prefetchable memory range:
   [0] -1   0   0x00000000 - 0xffffffff (0x0) MX[B]
(II) Bus 0 prefetchable memory range:
   [0] -1   0   0x00000000 - 0xffffffff (0x0) MX[B]
(II) PCI-to-PCI bridge:
(II) Bus 1: bridge is at (0:1:0), (0,1,1), BCTRL: 0x000e (VGA_EN is set)
(II) Bus 1 I/O range:
   [0] -1   0   0x0000c000 - 0x0000c0ff (0x100) IX[B]
   [1] -1   0   0x0000c400 - 0x0000c4ff (0x100) IX[B]
   [2] -1   0   0x0000c800 - 0x0000c8ff (0x100) IX[B]
   [3] -1   0   0x0000cc00 - 0x0000ccff (0x100) IX[B]
(II) Bus 1 non-prefetchable memory range:
   [0] -1   0   0xf0000000 - 0xf1ffffff (0x2000000) MX[B]
(II) Bus 1 prefetchable memory range:
   [0] -1   0   0xe0000000 - 0xefffffff (0x10000000) MX[B]
(II) PCI-to-ISA bridge:
(II) Bus -1: bridge is at (0:7:0), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is set)
(II) PCI-to-PCI bridge:
(II) Bus 2: bridge is at (0:16:0), (0,2,2), BCTRL: 0x0006 (VGA_EN is cleared)
(II) Bus 2 I/O range:
   [0] -1   0   0x0000d000 - 0x0000d0ff (0x100) IX[B]
   [1] -1   0   0x0000d400 - 0x0000d4ff (0x100) IX[B]
   [2] -1   0   0x0000d800 - 0x0000d8ff (0x100) IX[B]
   [3] -1   0   0x0000dc00 - 0x0000dcff (0x100) IX[B]
(II) Bus 2 non-prefetchable memory range:
   [0] -1   0   0xf2000000 - 0xf3ffffff (0x2000000) MX[B]
(II) Bus 2 prefetchable memory range:
   [0] -1   0   0xf4000000 - 0xf40fffff (0x100000) MX[B]
(--) PCI:*(1:5:0) ATI Technologies Inc unknown chipset (0x4e48) rev 0, Mem @ 0xe0000000/27, 0xf1000000/16, I/O @ 0xc000/8
(--) PCI: (1:5:1) ATI Technologies Inc unknown chipset (0x4e68) rev 0, Mem @ 0xe8000000/27, 0xf1010000/16
(II) Addressable bus resource ranges are
   [0] -1   0   0x00000000 - 0xffffffff (0x0) MX[B]
   [1] -1   0   0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) OS-reported resource ranges:
   [0] -1   0   0xffe00000 - 0xffffffff (0x200000) MX[B](B)
   [1] -1   0   0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
   [2] -1   0   0x000f0000 - 0x000fffff (0x10000) MX[B]
   [3] -1   0   0x000c0000 - 0x000effff (0x30000) MX[B]
   [4] -1   0   0x00000000 - 0x0009ffff (0xa0000) MX[B]
   [5] -1   0   0x0000ffff - 0x0000ffff (0x1) IX[B]
   [6] -1   0   0x00000000 - 0x000000ff (0x100) IX[B]
(II) PCI Memory resource overlap reduced 0xd8000000 from 0xdfffffff to 0xd7ffffff
(II) PCI Memory resource overlap reduced 0xf4100000 from 0xf4100fff to 0xf40fffff
(II) PCI I/O resource overlap reduced 0x0000e400 from 0x0000e403 to 0x0000e3ff
(II) Active PCI resource ranges:
   [0] -1   0   0xf3100000 - 0xf3103fff (0x4000) MX[B]
   [1] -1   0   0xf3104000 - 0xf31047ff (0x800) MX[B]
   [2] -1   0   0xf3000000 - 0xf30fffff (0x100000) MX[B]
   [3] -1   0   0xf4000000 - 0xf4000fff (0x1000) MX[B]
   [4] -1   0   0xf3105000 - 0xf3105fff (0x1000) MX[B]
   [5] -1   0   0xf4100000 - 0xf40fffff (0x0) MX[B]O
   [6] -1   0   0xd8000000 - 0xd7ffffff (0x0) MX[B]O
   [7] -1   0   0xf1000000 - 0xf100ffff (0x10000) MX[B](B)
   [8] -1   0   0xe0000000 - 0xe7ffffff (0x8000000) MX[B](B)
   [9] -1   0   0x0000d800 - 0x0000d807 (0x8) IX[B]
   [10] -1   0   0x0000d400 - 0x0000d41f (0x20) IX[B]
   [11] -1   0   0x0000d000 - 0x0000d01f (0x20) IX[B]
   [12] -1   0   0x0000e000 - 0x0000e00f (0x10) IX[B]
   [13] -1   0   0x0000e400 - 0x0000e3ff (0x0) IX[B]O
   [14] -1   0   0x0000c000 - 0x0000c0ff (0x100) IX[B](B)
(II) Inactive PCI resource ranges:
   [0] -1   0   0xf1010000 - 0xf101ffff (0x10000) MX[B](B)
   [1] -1   0   0xe8000000 - 0xefffffff (0x8000000) MX[B](B)
(II) Active PCI resource ranges after removing overlaps:
   [0] -1   0   0xf3100000 - 0xf3103fff (0x4000) MX[B]
   [1] -1   0   0xf3104000 - 0xf31047ff (0x800) MX[B]
   [2] -1   0   0xf3000000 - 0xf30fffff (0x100000) MX[B]
   [3] -1   0   0xf4000000 - 0xf4000fff (0x1000) MX[B]
   [4] -1   0   0xf3105000 - 0xf3105fff (0x1000) MX[B]
   [5] -1   0   0xf4100000 - 0xf40fffff (0x0) MX[B]O
   [6] -1   0   0xd8000000 - 0xd7ffffff (0x0) MX[B]O
   [7] -1   0   0xf1000000 - 0xf100ffff (0x10000) MX[B](B)
   [8] -1   0   0xe0000000 - 0xe7ffffff (0x8000000) MX[B](B)
   [9] -1   0   0x0000d800 - 0x0000d807 (0x8) IX[B]
   [10] -1   0   0x0000d400 - 0x0000d41f (0x20) IX[B]
   [11] -1   0   0x0000d000 - 0x0000d01f (0x20) IX[B]
   [12] -1   0   0x0000e000 - 0x0000e00f (0x10) IX[B]
   [13] -1   0   0x0000e400 - 0x0000e3ff (0x0) IX[B]O
   [14] -1   0   0x0000c000 - 0x0000c0ff (0x100) IX[B](B)
(II) Inactive PCI resource ranges after removing overlaps:
   [0] -1   0   0xf1010000 - 0xf101ffff (0x10000) MX[B](B)
   [1] -1   0   0xe8000000 - 0xefffffff (0x8000000) MX[B](B)
(II) OS-reported resource ranges after removing overlaps with PCI:
   [0] -1   0   0xffe00000 - 0xffffffff (0x200000) MX[B](B)
   [1] -1   0   0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
   [2] -1   0   0x000f0000 - 0x000fffff (0x10000) MX[B]
   [3] -1   0   0x000c0000 - 0x000effff (0x30000) MX[B]
   [4] -1   0   0x00000000 - 0x0009ffff (0xa0000) MX[B]
   [5] -1   0   0x0000ffff - 0x0000ffff (0x1) IX[B]
   [6] -1   0   0x00000000 - 0x000000ff (0x100) IX[B]
(II) All system resource ranges:
   [0] -1   0   0xffe00000 - 0xffffffff (0x200000) MX[B](B)
   [1] -1   0   0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
   [2] -1   0   0x000f0000 - 0x000fffff (0x10000) MX[B]
   [3] -1   0   0x000c0000 - 0x000effff (0x30000) MX[B]
   [4] -1   0   0x00000000 - 0x0009ffff (0xa0000) MX[B]
   [5] -1   0   0xf3100000 - 0xf3103fff (0x4000) MX[B]
   [6] -1   0   0xf3104000 - 0xf31047ff (0x800) MX[B]
   [7] -1   0   0xf3000000 - 0xf30fffff (0x100000) MX[B]
   [8] -1   0   0xf4000000 - 0xf4000fff (0x1000) MX[B]
   [9] -1   0   0xf3105000 - 0xf3105fff (0x1000) MX[B]
   [10] -1   0   0xf4100000 - 0xf40fffff (0x0) MX[B]O
   [11] -1   0   0xd8000000 - 0xd7ffffff (0x0) MX[B]O
   [12] -1   0   0xf1000000 - 0xf100ffff (0x10000) MX[B](B)
   [13] -1   0   0xe0000000 - 0xe7ffffff (0x8000000) MX[B](B)
   [14] -1   0   0xf1010000 - 0xf101ffff (0x10000) MX[B](B)
   [15] -1   0   0xe8000000 - 0xefffffff (0x8000000) MX[B](B)
   [16] -1   0   0x0000ffff - 0x0000ffff (0x1) IX[B]
   [17] -1   0   0x00000000 - 0x000000ff (0x100) IX[B]
   [18] -1   0   0x0000d800 - 0x0000d807 (0x8) IX[B]
   [19] -1   0   0x0000d400 - 0x0000d41f (0x20) IX[B]
   [20] -1   0   0x0000d000 - 0x0000d01f (0x20) IX[B]
   [21] -1   0   0x0000e000 - 0x0000e00f (0x10) IX[B]
   [22] -1   0   0x0000e400 - 0x0000e3ff (0x0) IX[B]O
   [23] -1   0   0x0000c000 - 0x0000c0ff (0x100) IX[B](B)
(II) MGA: driver for Matrox chipsets: mga2064w, mga1064sg, mga2164w,
   mga2164w AGP, mgag100, mgag100 PCI, mgag200, mgag200 PCI, mgag400,
   mgag550
(II) GLINT: driver for 3Dlabs chipsets: gamma, gamma2, ti_pm2, ti_pm, r4,
   pm4, pm3, pm2v, pm2, pm, 300sx, 500tx, mx, delta
(II) NV: driver for NVIDIA chipsets: RIVA 128, RIVA TNT, RIVA TNT2, Vanta,
   RIVA TNT2 Ultra, RIVA TNT2 Model 64, Aladdin TNT2, GeForce 256,
   GeForce DDR, Quadro, GeForce2 MX/MX 400, GeForce2 MX 100/200,
   GeForce2 Go, Quadro2 MXR/EX/Go, GeForce2 Integrated GPU,
   GeForce2 GTS, GeForce2 Ti, GeForce2 Ultra, Quadro2 Pro,
   GeForce4 MX 460, GeForce4 MX 440, GeForce4 MX 420,
   GeForce4 MX 440-SE, GeForce4 440 Go, GeForce4 420 Go,
   GeForce4 420 Go 32M, GeForce4 460 Go, GeForce4 440 Go 64M,
   GeForce4 410 Go 16M, Quadro4 500 GoGL, Quadro4 550 XGL, Quadro4 NVS,
   GeForce4 MX 440 with AGP8X, GeForce4 MX 440SE with AGP8X,
   GeForce4 MX 420 with AGP8X, GeForce4 448 Go, GeForce4 488 Go,
   Quadro4 580 XGL, Quadro4 280 NVS, Quadro4 380 XGL,
   GeForce4 MX Integrated GPU, GeForce3, GeForce3 Ti 200,
   GeForce3 Ti 500, Quadro DCC, GeForce4 Ti 4600, GeForce4 Ti 4400,
   0x0252, GeForce4 Ti 4200, Quadro4 900 XGL, Quadro4 750 XGL,
   Quadro4 700 XGL, GeForce4 Ti 4800, GeForce4 Ti 4200 with AGP8X,
   GeForce4 Ti 4800 SE, GeForce4 4200 Go, Quadro4 700 GoGL,
   Quadro4 980 XGL, Quadro4 780 XGL, 0x0300, GeForce FX 5800 Ultra,
   GeForce FX 5800, Quadro FX 2000, Quadro FX 1000,
   GeForce FX 5600 Ultra, GeForce FX 5600, 0x0316, 0x0317, 0x0318,
   0x0319, 0x031A, 0x031B, 0x031C, 0x031D, 0x031E, 0x031F,
   GeForce FX 5200 Ultra, GeForce FX 5200, 0x0323, GeForce FX Go5200,
   GeForce FX Go5250, 0x032A, Quadro FX 500, 0x032C, 0x032D, 0x032F
(II) TGA: driver for Digital chipsets: tga, tga2
(II) S3: driver (version 0.3.5 for S3 chipset: 964-0, 964-1, 968,
   Trio32/64, Aurora64V+
(II) S3VIRGE: driver (version 1.8.6) for S3 ViRGE chipsets: virge, 86C325,
   virge vx, 86C988, virge dx, virge gx, 86C375, 86C385, virge gx2,
   86C357, virge mx, 86C260, virge mx+, 86C280, trio 3d, 86C365,
   trio 3d/2x, 86C362, 86C368
(II) SIS: driver for SiS chipsets: SIS5597/5598, SIS530/620,
   SIS6326/AGP/DVD, SIS300/305, SIS630/730, SIS540, SIS315, SIS315H,
   SIS315PRO, SIS550, SIS650/M650/651/661FX/M661FX/740/741,
   SIS330(Xabre), SIS760
(II) RENDITION: rendition driver (version 4.0) for chipsets: V1000,
   V2100/V2200
(II) NEOMAGIC: Driver for Neomagic chipsets: neo2070, neo2090, neo2093,
   neo2097, neo2160, neo2200, neo2230, neo2360, neo2380
(II) I740: Driver for Intel i740 chipset: i740 (agp), i740 (pci)
(II) TDFX: Driver for 3dfx Banshee/Voodoo3 chipsets: 3dfx Banshee,
   3dfx Voodoo3, 3dfx Voodoo5
(II) SAVAGE: driver (version 1.1.27t) for S3 Savage chipsets: Savage4,
   Savage3D, Savage3D-MV, Savage2000, Savage/MX-MV, Savage/MX,
   Savage/IX-MV, Savage/IX, ProSavage PM133, ProSavage KM133,
   Twister PN133, Twister KN133, SuperSavage/MX 128, SuperSavage/MX 64,
   SuperSavage/MX 64C, SuperSavage/IX 128, SuperSavage/IX 128,
   SuperSavage/IX 64, SuperSavage/IX 64, SuperSavage/IXC 64,
   SuperSavage/IXC 64, ProSavage DDR, ProSavage DDR-K
(II) CIRRUS: driver for Cirrus chipsets: CLGD5430, CLGD5434-4, CLGD5434-8,
   CLGD5436, CLGD5446, CLGD5480, CL-GD5462, CL-GD5464, CL-GD5464BD,
   CL-GD5465, CL-GD7548
(II) VMWARE: driver for VMware SVGA: vmware0405, vmware0710
(II) TSENG: driver for Tseng Labs chipsets: ET4000, ET4000W32, ET4000W32i,
   ET4000W32p, ET6000, ET6100,
(II) TRIDENT: driver for Trident chipsets: tvga9000, tvga9000i, tvga8900c,
   tvga8900d, tvga9200cxr, tgui9400cxi, cyber9320, cyber9388, cyber9397,
   cyber9397dvd, cyber9520, cyber9525dvd, cyberblade/e4, tgui9420dgi,
   tgui9440agi, tgui9660, tgui9680, providia9682, providia9685,
   cyber9382, cyber9385, 3dimage975, 3dimage985, blade3d, cyberbladei7,
   cyberbladei7d, cyberbladei1, cyberbladei1d, cyberbladeAi1,
   cyberbladeAi1d, bladeXP, cyberbladeXPAi1
(II) CHIPS: Driver for Chips and Technologies chipsets: ct65520, ct65525,
   ct65530, ct65535, ct65540, ct65545, ct65546, ct65548, ct65550,
   ct65554, ct65555, ct68554, ct69000, ct69030, ct64200, ct64300
(II) APM: driver for the Alliance chipsets: AP6422, AT24, AT3D
(II) FBDEV: driver for framebuffer: fbdev, afb
(II) I128: driver for Number Nine I128 chipsets: i128, i128v2, i128t2r,
   i128t2r4
(II) NSC: Nsc family driver (version 2.7.6) for chipsets: 5530, SC1200,
   SC1400, REDCLOUD
(II) ATI: ATI driver (version 6.4.18) for chipsets: ati, ativga
(II) R128: Driver for ATI Rage 128 chipsets:
   ATI Rage 128 Mobility M3 LE (PCI), ATI Rage 128 Mobility M3 LF (AGP),
   ATI Rage 128 Mobility M4 MF (AGP), ATI Rage 128 Mobility M4 ML (AGP),
   ATI Rage 128 Pro GL PA (AGP?), ATI Rage 128 Pro GL PB (AGP?),
   ATI Rage 128 Pro GL PC (AGP?), ATI Rage 128 Pro GL PD (PCI),
   ATI Rage 128 Pro GL PE (AGP?), ATI Rage 128 Pro GL PF (AGP),
   ATI Rage 128 Pro VR PG (AGP?), ATI Rage 128 Pro VR PH (AGP?),
   ATI Rage 128 Pro VR PI (AGP?), ATI Rage 128 Pro VR PJ (AGP?),
   ATI Rage 128 Pro VR PK (AGP?), ATI Rage 128 Pro VR PL (AGP?),
   ATI Rage 128 Pro VR PM (AGP?), ATI Rage 128 Pro VR PN (AGP?),
   ATI Rage 128 Pro VR PO (AGP?), ATI Rage 128 Pro VR PP (PCI),
   ATI Rage 128 Pro VR PQ (AGP?), ATI Rage 128 Pro VR PR (PCI),
   ATI Rage 128 Pro VR PS (AGP?), ATI Rage 128 Pro VR PT (AGP?),
   ATI Rage 128 Pro VR PU (AGP?), ATI Rage 128 Pro VR PV (AGP?),
   ATI Rage 128 Pro VR PW (AGP?), ATI Rage 128 Pro VR PX (AGP?),
   ATI Rage 128 GL RE (PCI), ATI Rage 128 GL RF (AGP),
   ATI Rage 128 RG (AGP), ATI Rage 128 VR RK (PCI),
   ATI Rage 128 VR RL (AGP), ATI Rage 128 4X SE (AGP?),
   ATI Rage 128 4X SF (AGP?), ATI Rage 128 4X SG (AGP?),
   ATI Rage 128 4X SH (AGP?), ATI Rage 128 4X SK (AGP?),
   ATI Rage 128 4X SL (AGP?), ATI Rage 128 4X SM (AGP),
   ATI Rage 128 4X SN (AGP?), ATI Rage 128 Pro ULTRA TF (AGP),
   ATI Rage 128 Pro ULTRA TL (AGP), ATI Rage 128 Pro ULTRA TR (AGP),
   ATI Rage 128 Pro ULTRA TS (AGP?), ATI Rage 128 Pro ULTRA TT (AGP?),
   ATI Rage 128 Pro ULTRA TU (AGP?)
(II) RADEON: Driver for ATI Radeon chipsets: ATI Radeon QD (AGP),
   ATI Radeon QE (AGP), ATI Radeon QF (AGP), ATI Radeon QG (AGP),
   ATI Radeon VE/7000 QY (AGP), ATI Radeon VE/7000 QZ (AGP),
   ATI Radeon Mobility M7 LW (AGP),
   ATI Mobility FireGL 7800 M7 LX (AGP),
   ATI Radeon Mobility M6 LY (AGP), ATI Radeon Mobility M6 LZ (AGP),
   ATI Radeon IGP320 (A3) 4136, ATI Radeon IGP320M (U1) 4336,
   ATI Radeon IGP330/340/350 (A4) 4137,
   ATI Radeon IGP330M/340M/350M (U2) 4337,
   ATI Radeon 7000 IGP (A4+) 4237, ATI Radeon Mobility 7000 IGP 4437,
   ATI FireGL 8700/8800 QH (AGP), ATI Radeon 8500 QI (AGP),
   ATI Radeon 8500 QJ (AGP), ATI Radeon 8500 QK (AGP),
   ATI Radeon 8500 QL (AGP), ATI Radeon 9100 QM (AGP),
   ATI Radeon 8500 QN (AGP), ATI Radeon 8500 QO (AGP),
   ATI Radeon 8500 Qh (AGP), ATI Radeon 8500 Qi (AGP),
   ATI Radeon 8500 Qj (AGP), ATI Radeon 8500 Qk (AGP),
   ATI Radeon 8500 Ql (AGP), ATI Radeon 8500 BB (AGP),
   ATI Radeon 7500 QW (AGP), ATI Radeon 7500 QX (AGP),
   ATI Radeon 9000 Id (AGP), ATI Radeon 9000 Ie (AGP),
   ATI Radeon 9000 If (AGP), ATI Radeon 9000 Ig (AGP),
   ATI Radeon Mobility M9 Ld (AGP), ATI Radeon Mobility M9 Le (AGP),
   ATI Radeon Mobility M9 Lf (AGP), ATI Radeon Mobility M9 Lg (AGP),
   ATI Radeon 9000 IGP (A5) 5834,
   ATI Radeon Mobility 9000 IGP (U3) 5835, ATI Radeon 9200 5960 (AGP),
   ATI Radeon 9200 5961 (AGP), ATI Radeon 9200 5962 (AGP),
   ATI Radeon 9200 5963 (AGP), ATI Radeon 9200 5964 (AGP),
   ATI Radeon M9+ 5968 (AGP), ATI Radeon M9+ 5969 (AGP),
   ATI Radeon M9+ 596A (AGP), ATI Radeon M9+ 596B (AGP),
   ATI Radeon 9500 AD (AGP), ATI Radeon 9500 AE (AGP),
   ATI Radeon 9500 AF (AGP), ATI FireGL Z1/X1 AG (AGP),
   ATI Radeon 9700 Pro ND (AGP), ATI Radeon 9700/9500Pro NE (AGP),
   ATI Radeon 9700 NF (AGP), ATI FireGL X1 NG (AGP),
   ATI Radeon 9600 AP (AGP), ATI Radeon 9600 Pro AR (AGP),
   ATI Radeon Mobility M10 NP (AGP), ATI FireGL (R350) AK (AGP),
   ATI Radeon 9800 NH (AGP), ATI FireGL (R350) NK (AGP)
(II) I810: Driver for Intel Integrated Graphics Chipsets: i810, i810-dc100,
   i810e, i815, i830M, 845G, 852GM/855GM, 865G
(II) ARK: driver (version 0.5.0 for ARK Logic chipset: ark1000pv,
   ark2000pv, ark2000mt
(II) CYRIX: driver for Cyrix MediaGX Processors: mediagx
(II) Silicon Motion: driver (version 1.3.1) for Silicon Motion Lynx chipsets:
   Lynx, LynxE, Lynx3D, LynxEM, LynxEM+, Lynx3DM
(II) VESA: driver for VESA chipsets: vesa
(II) VGA: Generic VGA driver (version 4.0) for chipsets: generic
(II) DUMMY: Driver for Dummy chipsets: dummy
(II) v4l driver for Video4Linux
(II) Primary Device is: PCI 01:05:0
(EE) No devices detected.

Fatal server error:
no screens found

When reporting a problem related to a server crash, please send
the full server output, not just the last messages.
This can be found in the log file "/var/log/XFree86.0.log".
Please report problems to xfree86@xfree86.org.
Any ideas??
_________________
Life without passion is death in disguise
Back to top
View user's profile Send private message
KShots
Guru
Guru


Joined: 09 Oct 2003
Posts: 589
Location: Florida

PostPosted: Mon Oct 27, 2003 6:16 pm    Post subject: Reply with quote

Alright... I'm back in vesa mode (nice, safe, dull vesa). According to that log file, it looks like it polled a lot of possible drivers and didn't find anything suitable. What's that about?
_________________
Life without passion is death in disguise
Back to top
View user's profile Send private message
KShots
Guru
Guru


Joined: 09 Oct 2003
Posts: 589
Location: Florida

PostPosted: Mon Oct 27, 2003 10:56 pm    Post subject: Reply with quote

EDIT: I double-posted accidentally. Shortened this one up because I couldn't delete it...
_________________
Life without passion is death in disguise


Last edited by KShots on Tue Oct 28, 2003 12:54 pm; edited 1 time in total
Back to top
View user's profile Send private message
KShots
Guru
Guru


Joined: 09 Oct 2003
Posts: 589
Location: Florida

PostPosted: Mon Oct 27, 2003 11:01 pm    Post subject: Reply with quote

Surely someone either has a clue what's going on or is going through the same trauma... Just in case someone spots something, here's my XF86Config-4 file:
Code:
# File: XF86Config-4
# File generated by fglrxconfig (C) ATI Research, a substitute for xf86config.

# Note by ATI: the below copyright notice is there for servicing possibly
# pending third party rights on the file format and the instance of this file.
#
# Copyright (c) 1999 by The XFree86 Project, Inc.
#
# Permission is hereby granted, free of charge, to any person obtaining a
# copy of this software and associated documentation files (the "Software"),
# to deal in the Software without restriction, including without limitation
# the rights to use, copy, modify, merge, publish, distribute, sublicense,
# and/or sell copies of the Software, and to permit persons to whom the
# Software is furnished to do so, subject to the following conditions:
#
# The above copyright notice and this permission notice shall be included in
# all copies or substantial portions of the Software.
#
# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
# THE XFREE86 PROJECT BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
# WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF
# OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
# SOFTWARE.
#
# Except as contained in this notice, the name of the XFree86 Project shall
# not be used in advertising or otherwise to promote the sale, use or other
# dealings in this Software without prior written authorization from the
# XFree86 Project.
#

# **********************************************************************
# Refer to the XF86Config(4/5) man page for details about the format of
# this file.
# **********************************************************************

# **********************************************************************
# DRI Section
# **********************************************************************
Section "dri"
# Access to OpenGL ICD is allowed for all users:
    Mode 0666
# Access to OpenGL ICD is restricted to a specific user group:
#    Group 100    # users
#    Mode 0660
EndSection

# **********************************************************************
# Module section -- this  section  is used to specify
# which dynamically loadable modules to load.
# **********************************************************************
#
Section "Module"

# This loads the DBE extension module.

    Load        "dbe"     # Double buffer extension

# This loads the miscellaneous extensions module, and disables
# initialisation of the XFree86-DGA extension within that module.
    SubSection  "extmod"
      Option    "omit xfree86-dga"   # don't initialise the DGA extension
    EndSubSection

# This loads the Type1 and FreeType font modules
    Load        "type1"
    Load        "freetype"

# This loads the GLX module
    Load        "glx"   # libglx.a
    Load        "dri"   # libdri.a

EndSection

# **********************************************************************
# Files section.  This allows default font and rgb paths to be set
# **********************************************************************

Section "Files"

# The location of the RGB database.  Note, this is the name of the
# file minus the extension (like ".txt" or ".db").  There is normally
# no need to change the default.

    RgbPath   "/usr/X11R6/lib/X11/rgb"

# Multiple FontPath entries are allowed (which are concatenated together),
# as well as specifying multiple comma-separated entries in one FontPath
# command (or a combination of both methods)
#
# If you don't have a floating point coprocessor and emacs, Mosaic or other
# programs take long to start up, try moving the Type1 and Speedo directory
# to the end of this list (or comment them out).
#

    FontPath   "/usr/X11R6/lib/X11/fonts/local/"
    FontPath   "/usr/X11R6/lib/X11/fonts/misc/"
    FontPath   "/usr/X11R6/lib/X11/fonts/75dpi/:unscaled"
    FontPath   "/usr/X11R6/lib/X11/fonts/100dpi/:unscaled"
    FontPath   "/usr/X11R6/lib/X11/fonts/Type1/"
    FontPath   "/usr/X11R6/lib/X11/fonts/Speedo/"
    FontPath   "/usr/X11R6/lib/X11/fonts/75dpi/"
    FontPath   "/usr/X11R6/lib/X11/fonts/100dpi/"

# The module search path.  The default path is shown here.

#    ModulePath "/usr/X11R6/lib/modules"

EndSection

# **********************************************************************
# Server flags section.
# **********************************************************************

Section "ServerFlags"

# Uncomment this to cause a core dump at the spot where a signal is
# received.  This may leave the console in an unusable state, but may
# provide a better stack trace in the core dump to aid in debugging

#    Option "NoTrapSignals"

# Uncomment this to disable the <Crtl><Alt><BS> server abort sequence
# This allows clients to receive this key event.

#    Option "DontZap"

# Uncomment this to disable the <Crtl><Alt><KP_+>/<KP_-> mode switching
# sequences.  This allows clients to receive these key events.

#    Option "Dont Zoom"

# Uncomment this to disable tuning with the xvidtune client. With
# it the client can still run and fetch card and monitor attributes,
# but it will not be allowed to change them. If it tries it will
# receive a protocol error.

#    Option "DisableVidModeExtension"

# Uncomment this to enable the use of a non-local xvidtune client.

#    Option "AllowNonLocalXvidtune"

# Uncomment this to disable dynamically modifying the input device
# (mouse and keyboard) settings.

#    Option "DisableModInDev"

# Uncomment this to enable the use of a non-local client to
# change the keyboard or mouse settings (currently only xset).

#    Option "AllowNonLocalModInDev"

EndSection

# **********************************************************************
# Input devices
# **********************************************************************

# **********************************************************************
# Core keyboard's InputDevice section
# **********************************************************************

Section "InputDevice"

    Identifier   "Keyboard1"
    Driver   "Keyboard"
# For most OSs the protocol can be omitted (it defaults to "Standard").
# When using XQUEUE (only for SVR3 and SVR4, but not Solaris),
# uncomment the following line.

#    Option "Protocol"   "Xqueue"

    Option "AutoRepeat" "500 30"

# Specify which keyboard LEDs can be user-controlled (eg, with xset(1))
#    Option "Xleds"      "1 2 3"

#    Option "LeftAlt"    "Meta"
#    Option "RightAlt"   "ModeShift"

# To customise the XKB settings to suit your keyboard, modify the
# lines below (which are the defaults).  For example, for a non-U.S.
# keyboard, you will probably want to use:
#    Option "XkbModel"   "pc102"
# If you have a US Microsoft Natural keyboard, you can use:
#    Option "XkbModel"   "microsoft"
#
# Then to change the language, change the Layout setting.
# For example, a german layout can be obtained with:
#    Option "XkbLayout"  "de"
# or:
#    Option "XkbLayout"  "de"
#    Option "XkbVariant" "nodeadkeys"
#
# If you'd like to switch the positions of your capslock and
# control keys, use:
#    Option "XkbOptions" "ctrl:swapcaps"

# These are the default XKB settings for XFree86
#    Option "XkbRules"   "xfree86"
#    Option "XkbModel"   "pc101"
#    Option "XkbLayout"  "us"
#    Option "XkbVariant" ""
#    Option "XkbOptions" ""

#    Option "XkbDisable"

    Option "XkbRules"   "xfree86"
    Option "XkbModel"   "pc101"
    Option "XkbLayout"   "us"

EndSection


# **********************************************************************
# Core Pointer's InputDevice section
# **********************************************************************

Section "InputDevice"

# Identifier and driver

    Identifier   "Mouse1"
    Driver "mouse"
    Option "Protocol"   "ImPS/2"
    Option "ZAxisMapping"   "4 5"
    Option "Device"     "/dev/mouse"

# When using XQUEUE, comment out the above two lines, and uncomment
# the following line.

#    Option "Protocol"   "Xqueue"

# Baudrate and SampleRate are only for some Logitech mice. In
# almost every case these lines should be omitted.

#    Option "BaudRate"   "9600"
#    Option "SampleRate" "150"

# Emulate3Buttons is an option for 2-button Microsoft mice
# Emulate3Timeout is the timeout in milliseconds (default is 50ms)

#    Option "Emulate3Buttons"
#    Option "Emulate3Timeout"    "50"

# ChordMiddle is an option for some 3-button Logitech mice

#    Option "ChordMiddle"

EndSection


# **********************************************************************
# Other input device sections
# this is optional and is required only if you
# are using extended input devices.  This is for example only.  Refer
# to the XF86Config man page for a description of the options.
# **********************************************************************
#
# Section "InputDevice"
#    Identifier  "Mouse2"
#    Driver      "mouse"
#    Option      "Protocol"      "MouseMan"
#    Option      "Device"        "/dev/mouse2"
# EndSection
#
# Section "InputDevice"
#    Identifier "spaceball"
#    Driver     "magellan"
#    Option     "Device"         "/dev/cua0"
# EndSection
#
# Section "InputDevice"
#    Identifier "spaceball2"
#    Driver     "spaceorb"
#    Option     "Device"         "/dev/cua0"
# EndSection
#
# Section "InputDevice"
#    Identifier "touchscreen0"
#    Driver     "microtouch"
#    Option     "Device"         "/dev/ttyS0"
#    Option     "MinX"           "1412"
#    Option     "MaxX"           "15184"
#    Option     "MinY"           "15372"
#    Option     "MaxY"           "1230"
#    Option     "ScreenNumber"   "0"
#    Option     "ReportingMode"  "Scaled"
#    Option     "ButtonNumber"   "1"
#    Option     "SendCoreEvents"
# EndSection
#
# Section "InputDevice"
#    Identifier "touchscreen1"
#    Driver     "elo2300"
#    Option     "Device"         "/dev/ttyS0"
#    Option     "MinX"           "231"
#    Option     "MaxX"           "3868"
#    Option     "MinY"           "3858"
#    Option     "MaxY"           "272"
#    Option     "ScreenNumber"   "0"
#    Option     "ReportingMode"  "Scaled"
#    Option     "ButtonThreshold"    "17"
#    Option     "ButtonNumber"   "1"
#    Option     "SendCoreEvents"
# EndSection

# **********************************************************************
# Monitor section
# **********************************************************************

# Any number of monitor sections may be present

Section "Monitor"
    Identifier  "Monitor0"
    HorizSync   31.5 - 60.0
    VertRefresh 60 - 75
    Option "DPMS"

# === mode lines based on GTF ===
# VGA @ 100Hz
# Modeline "640x480@100" 43.163 640 680 744 848 480 481 484 509 +hsync +vsync
# SVGA @ 100Hz
# Modeline "800x600@100" 68.179 800 848 936 1072 600 601 604 636 +hsync +vsync
# XVGA @ 100Hz
# Modeline "1024x768@100" 113.309 1024 1096 1208 1392 768 769 772 814 +hsync +vsync
# 1152x864 @ 60Hz
# Modeline "1152x864@60" 81.642 1152 1216 1336 1520 864 865 868 895 +hsync +vsync
# 1152x864 @ 85Hz
# Modeline "1152x864@85" 119.651 1152 1224 1352 1552 864 865 868 907 +hsync +vsync
# 1152x864 @ 100Hz
# Modeline "1152x864@100" 143.472 1152 1232 1360 1568 864 865 868 915 +hsync +vsync
# 1280x960 @ 75Hz
# Modeline "1280x960@75" 129.859 1280 1368 1504 1728 960 961 964 1002 +hsync +vsync
# 1280x960 @ 100Hz
# Modeline "1280x960@100" 178.992 1280 1376 1520 1760 960 961 964 1017  +hsync +vsync
# SXGA @ 100Hz
# Modeline "1280x1024@100" 190.960 1280 1376 1520 1760 1024 1025 1028 1085 +hsync +vsync
# SPEA GDM-1950 (60Hz,64kHz,110MHz,-,-): 1280x1024 @ V-freq: 60.00 Hz, H-freq: 63.73 KHz
# Modeline "GDM-1950"  109.62  1280 1336 1472 1720  1024 1024 1026 1062 -hsync -vsync
# 1600x1000 @ 60Hz
# Modeline "1600x1000" 133.142 1600 1704 1872 2144 1000 1001 1004 1035 +hsync +vsync
# 1600x1000 @ 75Hz
# Modeline "1600x1000" 169.128 1600 1704 1880 2160 1000 1001 1004 1044 +hsync +vsync
# 1600x1000 @ 85Hz
# Modeline "1600x1000" 194.202 1600 1712 1888 2176 1000 1001 1004 1050 +hsync +vsync
# 1600x1000 @ 100Hz
# Modeline "1600x1000" 232.133 1600 1720 1896 2192 1000 1001 1004 1059 +hsync +vsync
# 1600x1024 @ 60Hz
# Modeline "1600x1024" 136.385 1600 1704 1872 2144 1024 1027 1030 1060 +hsync +vsync
# 1600x1024 @ 75Hz
# Modeline "1600x1024" 174.416 1600 1712 1888 2176 1024 1025 1028 1069 +hsync +vsync
# 1600x1024 @ 76Hz
# Modeline "1600x1024" 170.450 1600 1632 1792 2096 1024 1027 1030 1070 +hsync +vsync
# 1600x1024 @ 85Hz
# Modeline "1600x1024" 198.832 1600 1712 1888 2176 1024 1027 1030 1075 +hsync +vsync
# 1920x1080 @ 60Hz
# Modeline "1920x1080" 172.798 1920 2040 2248 2576 1080 1081 1084 1118 -hsync -vsync
# 1920x1080 @ 75Hz
# Modeline "1920x1080" 211.436 1920 2056 2264 2608 1080 1081 1084 1126 +hsync +vsync
# 1920x1200 @ 60Hz
# Modeline "1920x1200" 193.156 1920 2048 2256 2592 1200 1201 1203 1242 +hsync +vsync
# 1920x1200 @ 75Hz
# Modeline "1920x1200" 246.590 1920 2064 2272 2624 1200 1201 1203 1253 +hsync +vsync
# 2048x1536 @ 60
# Modeline "2048x1536" 266.952 2048 2200 2424 2800 1536 1537 1540 1589 +hsync +vsync
# 2048x1536 @ 60
# Modeline "2048x1536" 266.952 2048 2200 2424 2800 1536 1537 1540 1589 +hsync +vsync
# 1400x1050 @ 60Hz M9 Laptop mode
# ModeLine "1400x1050" 122.000 1400 1488 1640 1880 1050 1052 1064 1082 +hsync +vsync
# 1920x2400 @ 25Hz for IBM T221, VS VP2290 and compatible display devices
# Modeline "1920x2400@25" 124.620 1920 1928 1980 2048 2400 2401 2403 2434 +hsync +vsync
# 1920x2400 @ 30Hz for IBM T221, VS VP2290 and compatible display devices
# Modeline "1920x2400@30" 149.250 1920 1928 1982 2044 2400 2402 2404 2434 +hsync +vsync

EndSection


# **********************************************************************
# Graphics device section
# **********************************************************************

# Any number of graphics device sections may be present

# Standard VGA Device:

Section "Device"
    Identifier  "Standard VGA"
    VendorName  "Unknown"
    BoardName   "Unknown"

# The chipset line is optional in most cases.  It can be used to override
# the driver's chipset detection, and should not normally be specified.

#    Chipset     "generic"

# The Driver line must be present.  When using run-time loadable driver
# modules, this line instructs the server to load the specified driver
# module.  Even when not using loadable driver modules, this line
# indicates which driver should interpret the information in this section.

    Driver      "vga"
# The BusID line is used to specify which of possibly multiple devices
# this section is intended for.  When this line isn't present, a device
# section can only match up with the primary video device.  For PCI
# devices a line like the following could be used.  This line should not
# normally be included unless there is more than one video device
# installed.

#    BusID       "PCI:0:10:0"

#    VideoRam    256

#    Clocks      25.2 28.3

EndSection

# === ATI device section ===

Section "Device"
    Identifier                          "ATI Graphics Adapter"
    Driver                              "fglrx"
# === disable PnP Monitor  ===
    #Option                              "NoDDC"
# === disable/enable XAA/DRI ===
    Option "no_accel"                   "no"
    Option "no_dri"                     "no"
# === FireGL DDX driver module specific settings ===
# === Screen Management ===
    Option "DesktopSetup"               "0x00000000"
    Option "MonitorLayout"              "AUTO, AUTO"
    Option "IgnoreEDID"                 "off"
    Option "HSync2"                     "unspecified"
    Option "VRefresh2"                  "unspecified"
    Option "ScreenOverlap"              "0"
    Option "GammaCorrectionI"           "0x00000000"
    Option "GammaCorrectionII"          "0x00000000"
# === OpenGL specific profiles/settings ===
    Option "Capabilities"               "0x00000800"
# === Video Overlay for the Xv extension ===
    Option "VideoOverlay"               "on"
# === OpenGL Overlay ===
# Note: When OpenGL Overlay is enabled, Video Overlay
#       will be disabled automatically
    Option "OpenGLOverlay"              "off"
# === Misc Options ===
    Option "UseFastTLS"                 "2"
    Option "BlockSignalsOnLock"         "on"
    Option "UseInternalAGPGART"         "no"
    Option "ForceGenericCPU"            "no"
#    BusID "PCI:1:0:0"    # no device found at config time
    Screen 0
EndSection

# **********************************************************************
# Screen sections
# **********************************************************************

# Any number of screen sections may be present.  Each describes
# the configuration of a single screen.  A single specific screen section
# may be specified from the X server command line with the "-screen"
# option.
Section "Screen"
    Identifier  "Screen0"
    Device      "ATI Graphics Adapter"
    Monitor     "Monitor0"
    DefaultDepth 24
    #Option "backingstore"

    Subsection "Display"
        Depth       24
        Modes       "1280x1024" "1024x768" "800x600"
        ViewPort    0 0  # initial origin if mode is smaller than desktop
#        Virtual     1280 1024
    EndSubsection
EndSection

# **********************************************************************
# ServerLayout sections.
# **********************************************************************

# Any number of ServerLayout sections may be present.  Each describes
# the way multiple screens are organised.  A specific ServerLayout
# section may be specified from the X server command line with the
# "-layout" option.  In the absence of this, the first section is used.
# When now ServerLayout section is present, the first Screen section
# is used alone.

Section "ServerLayout"

# The Identifier line must be present
    Identifier  "Server Layout"

# Each Screen line specifies a Screen section name, and optionally
# the relative position of other screens.  The four names after
# primary screen name are the screens to the top, bottom, left and right
# of the primary screen.

    Screen "Screen0"

# Each InputDevice line specifies an InputDevice section name and
# optionally some options to specify the way the device is to be
# used.  Those options include "CorePointer", "CoreKeyboard" and
# "SendCoreEvents".

    InputDevice "Mouse1" "CorePointer"
    InputDevice "Keyboard1" "CoreKeyboard"

EndSection

### EOF ###

_________________
Life without passion is death in disguise
Back to top
View user's profile Send private message
KShots
Guru
Guru


Joined: 09 Oct 2003
Posts: 589
Location: Florida

PostPosted: Mon Oct 27, 2003 11:03 pm    Post subject: Reply with quote

EDIT: ARGH... both my office and home are having trouble with the forum :(. I hit submit and five minutes later it's still at the "post" screen with the browser still trying to work - hence the double posts. I've removed this double-post...
_________________
Life without passion is death in disguise


Last edited by KShots on Tue Oct 28, 2003 1:00 pm; edited 1 time in total
Back to top
View user's profile Send private message
Wedge_
Advocate
Advocate


Joined: 08 Aug 2002
Posts: 3614
Location: Scotland

PostPosted: Mon Oct 27, 2003 11:29 pm    Post subject: Reply with quote

Some things to try:
- use the latest drivers - from your dmesg output you seem to be using 2.9.12. The newest version is currently 3.2.8 - do
Code:
ACCEPT_KEYWORDS="~x86" emerge ati-drivers
to get them (re-run fglrxconfig afterwards, it'll add some new options).
- change this line in your XF86Config:
Code:
#    BusID "PCI:1:0:0"    # no device found at config time

to
Code:
    BusID "PCI:1:5:0"

_________________
Per Ardua Ad Astra
The Earth is the cradle of the mind, but we cannot live forever in a cradle - Konstantin E. Tsiolkovsky
Gentoo Radeon FAQ
Back to top
View user's profile Send private message
KShots
Guru
Guru


Joined: 09 Oct 2003
Posts: 589
Location: Florida

PostPosted: Tue Oct 28, 2003 9:23 pm    Post subject: Reply with quote

Wedge_ wrote:
Some things to try:
- use the latest drivers - from your dmesg output you seem to be using 2.9.12. The newest version is currently 3.2.8 - do
Code:
ACCEPT_KEYWORDS="~x86" emerge ati-drivers
to get them (re-run fglrxconfig afterwards, it'll add some new options).
OK, did that - I am now running on 3.2.8 drivers.
Wedge_ wrote:
- change this line in your XF86Config:
Code:
#    BusID "PCI:1:0:0"    # no device found at config time

to
Code:
    BusID "PCI:1:5:0"
After running the config command, it found the card this time... that line was already set to that value. However, running startx gave me the same results as before. Here's the new XFConfig-4 file's contents (before I changed back to vesa to post here):
Code:
# File: XF86Config-4
# File generated by fglrxconfig (C) ATI Research, a substitute for xf86config.

# Note by ATI: the below copyright notice is there for servicing possibly
# pending third party rights on the file format and the instance of this file.
#
# Copyright (c) 1999 by The XFree86 Project, Inc.
#
# Permission is hereby granted, free of charge, to any person obtaining a
# copy of this software and associated documentation files (the "Software"),
# to deal in the Software without restriction, including without limitation
# the rights to use, copy, modify, merge, publish, distribute, sublicense,
# and/or sell copies of the Software, and to permit persons to whom the
# Software is furnished to do so, subject to the following conditions:
#
# The above copyright notice and this permission notice shall be included in
# all copies or substantial portions of the Software.
#
# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
# THE XFREE86 PROJECT BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
# WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF
# OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
# SOFTWARE.
#
# Except as contained in this notice, the name of the XFree86 Project shall
# not be used in advertising or otherwise to promote the sale, use or other
# dealings in this Software without prior written authorization from the
# XFree86 Project.
#

# **********************************************************************
# Refer to the XF86Config(4/5) man page for details about the format of
# this file.
# **********************************************************************

# **********************************************************************
# DRI Section
# **********************************************************************
Section "dri"
# Access to OpenGL ICD is allowed for all users:
    Mode 0666
# Access to OpenGL ICD is restricted to a specific user group:
#    Group 100    # users
#    Mode 0660
EndSection

# **********************************************************************
# Module section -- this  section  is used to specify
# which dynamically loadable modules to load.
# **********************************************************************
#
Section "Module"

# This loads the DBE extension module.

    Load        "dbe"     # Double buffer extension

# This loads the miscellaneous extensions module, and disables
# initialisation of the XFree86-DGA extension within that module.
    SubSection  "extmod"
      Option    "omit xfree86-dga"   # don't initialise the DGA extension
    EndSubSection

# This loads the Type1 and FreeType font modules
    Load        "type1"
    Load        "freetype"

# This loads the GLX module
    Load        "glx"   # libglx.a
    Load        "dri"   # libdri.a

EndSection

# **********************************************************************
# Files section.  This allows default font and rgb paths to be set
# **********************************************************************

Section "Files"

# The location of the RGB database.  Note, this is the name of the
# file minus the extension (like ".txt" or ".db").  There is normally
# no need to change the default.

    RgbPath   "/usr/X11R6/lib/X11/rgb"

# Multiple FontPath entries are allowed (which are concatenated together),
# as well as specifying multiple comma-separated entries in one FontPath
# command (or a combination of both methods)
#
# If you don't have a floating point coprocessor and emacs, Mosaic or other
# programs take long to start up, try moving the Type1 and Speedo directory
# to the end of this list (or comment them out).
#

    FontPath   "/usr/X11R6/lib/X11/fonts/local/"
    FontPath   "/usr/X11R6/lib/X11/fonts/misc/"
    FontPath   "/usr/X11R6/lib/X11/fonts/75dpi/:unscaled"
    FontPath   "/usr/X11R6/lib/X11/fonts/100dpi/:unscaled"
    FontPath   "/usr/X11R6/lib/X11/fonts/Type1/"
    FontPath   "/usr/X11R6/lib/X11/fonts/Speedo/"
    FontPath   "/usr/X11R6/lib/X11/fonts/75dpi/"
    FontPath   "/usr/X11R6/lib/X11/fonts/100dpi/"

# The module search path.  The default path is shown here.

#    ModulePath "/usr/X11R6/lib/modules"

EndSection

# **********************************************************************
# Server flags section.
# **********************************************************************

Section "ServerFlags"

# Uncomment this to cause a core dump at the spot where a signal is
# received.  This may leave the console in an unusable state, but may
# provide a better stack trace in the core dump to aid in debugging

#    Option "NoTrapSignals"

# Uncomment this to disable the <Crtl><Alt><BS> server abort sequence
# This allows clients to receive this key event.

#    Option "DontZap"

# Uncomment this to disable the <Crtl><Alt><KP_+>/<KP_-> mode switching
# sequences.  This allows clients to receive these key events.

#    Option "Dont Zoom"

# Uncomment this to disable tuning with the xvidtune client. With
# it the client can still run and fetch card and monitor attributes,
# but it will not be allowed to change them. If it tries it will
# receive a protocol error.

#    Option "DisableVidModeExtension"

# Uncomment this to enable the use of a non-local xvidtune client.

#    Option "AllowNonLocalXvidtune"

# Uncomment this to disable dynamically modifying the input device
# (mouse and keyboard) settings.

#    Option "DisableModInDev"

# Uncomment this to enable the use of a non-local client to
# change the keyboard or mouse settings (currently only xset).

#    Option "AllowNonLocalModInDev"

EndSection

# **********************************************************************
# Input devices
# **********************************************************************

# **********************************************************************
# Core keyboard's InputDevice section
# **********************************************************************

Section "InputDevice"

    Identifier   "Keyboard1"
    Driver   "Keyboard"
# For most OSs the protocol can be omitted (it defaults to "Standard").
# When using XQUEUE (only for SVR3 and SVR4, but not Solaris),
# uncomment the following line.

#    Option "Protocol"   "Xqueue"

    Option "AutoRepeat" "500 30"

# Specify which keyboard LEDs can be user-controlled (eg, with xset(1))
#    Option "Xleds"      "1 2 3"

#    Option "LeftAlt"    "Meta"
#    Option "RightAlt"   "ModeShift"

# To customise the XKB settings to suit your keyboard, modify the
# lines below (which are the defaults).  For example, for a non-U.S.
# keyboard, you will probably want to use:
#    Option "XkbModel"   "pc102"
# If you have a US Microsoft Natural keyboard, you can use:
#    Option "XkbModel"   "microsoft"
#
# Then to change the language, change the Layout setting.
# For example, a german layout can be obtained with:
#    Option "XkbLayout"  "de"
# or:
#    Option "XkbLayout"  "de"
#    Option "XkbVariant" "nodeadkeys"
#
# If you'd like to switch the positions of your capslock and
# control keys, use:
#    Option "XkbOptions" "ctrl:swapcaps"

# These are the default XKB settings for XFree86
#    Option "XkbRules"   "xfree86"
#    Option "XkbModel"   "pc101"
#    Option "XkbLayout"  "us"
#    Option "XkbVariant" ""
#    Option "XkbOptions" ""

#    Option "XkbDisable"

    Option "XkbRules"   "xfree86"
    Option "XkbModel"   "pc101"
    Option "XkbLayout"   "us"

EndSection


# **********************************************************************
# Core Pointer's InputDevice section
# **********************************************************************

Section "InputDevice"

# Identifier and driver

    Identifier   "Mouse1"
    Driver "mouse"
    Option "Protocol"   "ImPS/2"
    Option "ZAxisMapping"   "4 5"
    Option "Device"     "/dev/mouse"

# When using XQUEUE, comment out the above two lines, and uncomment
# the following line.

#    Option "Protocol"   "Xqueue"

# Baudrate and SampleRate are only for some Logitech mice. In
# almost every case these lines should be omitted.

#    Option "BaudRate"   "9600"
#    Option "SampleRate" "150"

# Emulate3Buttons is an option for 2-button Microsoft mice
# Emulate3Timeout is the timeout in milliseconds (default is 50ms)

#    Option "Emulate3Buttons"
#    Option "Emulate3Timeout"    "50"

# ChordMiddle is an option for some 3-button Logitech mice

#    Option "ChordMiddle"

EndSection


# **********************************************************************
# Other input device sections
# this is optional and is required only if you
# are using extended input devices.  This is for example only.  Refer
# to the XF86Config man page for a description of the options.
# **********************************************************************
#
# Section "InputDevice"
#    Identifier  "Mouse2"
#    Driver      "mouse"
#    Option      "Protocol"      "MouseMan"
#    Option      "Device"        "/dev/mouse2"
# EndSection
#
# Section "InputDevice"
#    Identifier "spaceball"
#    Driver     "magellan"
#    Option     "Device"         "/dev/cua0"
# EndSection
#
# Section "InputDevice"
#    Identifier "spaceball2"
#    Driver     "spaceorb"
#    Option     "Device"         "/dev/cua0"
# EndSection
#
# Section "InputDevice"
#    Identifier "touchscreen0"
#    Driver     "microtouch"
#    Option     "Device"         "/dev/ttyS0"
#    Option     "MinX"           "1412"
#    Option     "MaxX"           "15184"
#    Option     "MinY"           "15372"
#    Option     "MaxY"           "1230"
#    Option     "ScreenNumber"   "0"
#    Option     "ReportingMode"  "Scaled"
#    Option     "ButtonNumber"   "1"
#    Option     "SendCoreEvents"
# EndSection
#
# Section "InputDevice"
#    Identifier "touchscreen1"
#    Driver     "elo2300"
#    Option     "Device"         "/dev/ttyS0"
#    Option     "MinX"           "231"
#    Option     "MaxX"           "3868"
#    Option     "MinY"           "3858"
#    Option     "MaxY"           "272"
#    Option     "ScreenNumber"   "0"
#    Option     "ReportingMode"  "Scaled"
#    Option     "ButtonThreshold"    "17"
#    Option     "ButtonNumber"   "1"
#    Option     "SendCoreEvents"
# EndSection

# **********************************************************************
# Monitor section
# **********************************************************************

# Any number of monitor sections may be present

Section "Monitor"
    Identifier  "Monitor0"
    HorizSync   31.5 - 60.0
    VertRefresh 60 - 75
    Option "DPMS"

# === mode lines based on GTF ===
# VGA @ 100Hz
# Modeline "640x480@100" 43.163 640 680 744 848 480 481 484 509 +hsync +vsync
# SVGA @ 100Hz
# Modeline "800x600@100" 68.179 800 848 936 1072 600 601 604 636 +hsync +vsync
# XVGA @ 100Hz
# Modeline "1024x768@100" 113.309 1024 1096 1208 1392 768 769 772 814 +hsync +vsync
# 1152x864 @ 60Hz
# Modeline "1152x864@60" 81.642 1152 1216 1336 1520 864 865 868 895 +hsync +vsync
# 1152x864 @ 85Hz
# Modeline "1152x864@85" 119.651 1152 1224 1352 1552 864 865 868 907 +hsync +vsync
# 1152x864 @ 100Hz
# Modeline "1152x864@100" 143.472 1152 1232 1360 1568 864 865 868 915 +hsync +vsync
# 1280x960 @ 75Hz
# Modeline "1280x960@75" 129.859 1280 1368 1504 1728 960 961 964 1002 +hsync +vsync
# 1280x960 @ 100Hz
# Modeline "1280x960@100" 178.992 1280 1376 1520 1760 960 961 964 1017  +hsync +vsync
# SXGA @ 100Hz
# Modeline "1280x1024@100" 190.960 1280 1376 1520 1760 1024 1025 1028 1085 +hsync +vsync
# SPEA GDM-1950 (60Hz,64kHz,110MHz,-,-): 1280x1024 @ V-freq: 60.00 Hz, H-freq: 63.73 KHz
# Modeline "GDM-1950"  109.62  1280 1336 1472 1720  1024 1024 1026 1062 -hsync -vsync
# 1600x1000 @ 60Hz
# Modeline "1600x1000" 133.142 1600 1704 1872 2144 1000 1001 1004 1035 +hsync +vsync
# 1600x1000 @ 75Hz
# Modeline "1600x1000" 169.128 1600 1704 1880 2160 1000 1001 1004 1044 +hsync +vsync
# 1600x1000 @ 85Hz
# Modeline "1600x1000" 194.202 1600 1712 1888 2176 1000 1001 1004 1050 +hsync +vsync
# 1600x1000 @ 100Hz
# Modeline "1600x1000" 232.133 1600 1720 1896 2192 1000 1001 1004 1059 +hsync +vsync
# 1600x1024 @ 60Hz
# Modeline "1600x1024" 136.385 1600 1704 1872 2144 1024 1027 1030 1060 +hsync +vsync
# 1600x1024 @ 75Hz
# Modeline "1600x1024" 174.416 1600 1712 1888 2176 1024 1025 1028 1069 +hsync +vsync
# 1600x1024 @ 76Hz
# Modeline "1600x1024" 170.450 1600 1632 1792 2096 1024 1027 1030 1070 +hsync +vsync
# 1600x1024 @ 85Hz
# Modeline "1600x1024" 198.832 1600 1712 1888 2176 1024 1027 1030 1075 +hsync +vsync
# 1920x1080 @ 60Hz
# Modeline "1920x1080" 172.798 1920 2040 2248 2576 1080 1081 1084 1118 -hsync -vsync
# 1920x1080 @ 75Hz
# Modeline "1920x1080" 211.436 1920 2056 2264 2608 1080 1081 1084 1126 +hsync +vsync
# 1920x1200 @ 60Hz
# Modeline "1920x1200" 193.156 1920 2048 2256 2592 1200 1201 1203 1242 +hsync +vsync
# 1920x1200 @ 75Hz
# Modeline "1920x1200" 246.590 1920 2064 2272 2624 1200 1201 1203 1253 +hsync +vsync
# 2048x1536 @ 60
# Modeline "2048x1536" 266.952 2048 2200 2424 2800 1536 1537 1540 1589 +hsync +vsync
# 2048x1536 @ 60
# Modeline "2048x1536" 266.952 2048 2200 2424 2800 1536 1537 1540 1589 +hsync +vsync
# 1400x1050 @ 60Hz M9 Laptop mode
# ModeLine "1400x1050" 122.000 1400 1488 1640 1880 1050 1052 1064 1082 +hsync +vsync
# 1920x2400 @ 25Hz for IBM T221, VS VP2290 and compatible display devices
# Modeline "1920x2400@25" 124.620 1920 1928 1980 2048 2400 2401 2403 2434 +hsync +vsync
# 1920x2400 @ 30Hz for IBM T221, VS VP2290 and compatible display devices
# Modeline "1920x2400@30" 149.250 1920 1928 1982 2044 2400 2402 2404 2434 +hsync +vsync

EndSection


# **********************************************************************
# Graphics device section
# **********************************************************************

# Any number of graphics device sections may be present

# Standard VGA Device:

Section "Device"
    Identifier  "Standard VGA"
    VendorName  "Unknown"
    BoardName   "Unknown"

# The chipset line is optional in most cases.  It can be used to override
# the driver's chipset detection, and should not normally be specified.

#    Chipset     "generic"

# The Driver line must be present.  When using run-time loadable driver
# modules, this line instructs the server to load the specified driver
# module.  Even when not using loadable driver modules, this line
# indicates which driver should interpret the information in this section.

    Driver      "vga"
# The BusID line is used to specify which of possibly multiple devices
# this section is intended for.  When this line isn't present, a device
# section can only match up with the primary video device.  For PCI
# devices a line like the following could be used.  This line should not
# normally be included unless there is more than one video device
# installed.

#    BusID       "PCI:0:10:0"

#    VideoRam    256

#    Clocks      25.2 28.3

EndSection

# === ATI device section ===

Section "Device"
    Identifier                          "ATI Graphics Adapter"
    Driver                              "fglrx"
# === disable PnP Monitor  ===
    #Option                              "NoDDC"
# === disable/enable XAA/DRI ===
    Option "no_accel"                   "no"
    Option "no_dri"                     "no"
# === FireGL DDX driver module specific settings ===
# === Screen Management ===
    Option "DesktopSetup"               "0x00000000"
    Option "MonitorLayout"              "AUTO, AUTO"
    Option "IgnoreEDID"                 "off"
    Option "HSync2"                     "unspecified"
    Option "VRefresh2"                  "unspecified"
    Option "ScreenOverlap"              "0"
# === TV-out Management ===
    Option "NoTV"                       "yes"     
    Option "TVStandard"                 "NTSC-M"     
    Option "TVHSizeAdj"                 "0"     
    Option "TVVSizeAdj"                 "0"     
    Option "TVHPosAdj"                  "0"     
    Option "TVVPosAdj"                  "0"     
    Option "TVHStartAdj"                "0"     
    Option "TVColorAdj"                 "0"     
    Option "GammaCorrectionI"           "0x00000000"
    Option "GammaCorrectionII"          "0x00000000"
# === OpenGL specific profiles/settings ===
    Option "Capabilities"               "0x00000800"
# === Video Overlay for the Xv extension ===
    Option "VideoOverlay"               "on"
# === OpenGL Overlay ===
# Note: When OpenGL Overlay is enabled, Video Overlay
#       will be disabled automatically
    Option "OpenGLOverlay"              "off"
# === Center Mode (Laptops only) ===
    Option "CenterMode"                 "off"
# === Pseudo Color Visuals (8-bit visuals) ===
    Option "PseudoColorVisuals"         "off"
# === QBS Management ===
    Option "Stereo"                     "off"
    Option "StereoSyncEnable"           "1"
# === FSAA Management ===
    Option "FSAAScale"                  "6"
    Option "FSAADisableGamma"           "no"
    Option "FSAACustomizeMSPos"         "no"
    Option "FSAAMSPosX0"                "0.000000"
    Option "FSAAMSPosY0"                "0.000000"
    Option "FSAAMSPosX1"                "0.000000"
    Option "FSAAMSPosY1"                "0.000000"
    Option "FSAAMSPosX2"                "0.000000"
    Option "FSAAMSPosY2"                "0.000000"
    Option "FSAAMSPosX3"                "0.000000"
    Option "FSAAMSPosY3"                "0.000000"
    Option "FSAAMSPosX4"                "0.000000"
    Option "FSAAMSPosY4"                "0.000000"
    Option "FSAAMSPosX5"                "0.000000"
    Option "FSAAMSPosY5"                "0.000000"
# === Misc Options ===
    Option "UseFastTLS"                 "2"
    Option "BlockSignalsOnLock"         "on"
    Option "UseInternalAGPGART"         "no"
    Option "ForceGenericCPU"            "no"
    BusID "PCI:1:5:0"    # vendor=1002, device=4e48
    Screen 0
EndSection

# **********************************************************************
# Screen sections
# **********************************************************************

# Any number of screen sections may be present.  Each describes
# the configuration of a single screen.  A single specific screen section
# may be specified from the X server command line with the "-screen"
# option.
Section "Screen"
    Identifier  "Screen0"
    Device      "ATI Graphics Adapter"
    Monitor     "Monitor0"
    DefaultDepth 24
    #Option "backingstore"

    Subsection "Display"
        Depth       24
        Modes       "1280x1024" "1024x768" "800x600"
        ViewPort    0 0  # initial origin if mode is smaller than desktop
#        Virtual     1280 1024
    EndSubsection
EndSection

# **********************************************************************
# ServerLayout sections.
# **********************************************************************

# Any number of ServerLayout sections may be present.  Each describes
# the way multiple screens are organised.  A specific ServerLayout
# section may be specified from the X server command line with the
# "-layout" option.  In the absence of this, the first section is used.
# When now ServerLayout section is present, the first Screen section
# is used alone.

Section "ServerLayout"

# The Identifier line must be present
    Identifier  "Server Layout"

# Each Screen line specifies a Screen section name, and optionally
# the relative position of other screens.  The four names after
# primary screen name are the screens to the top, bottom, left and right
# of the primary screen.

    Screen "Screen0"

# Each InputDevice line specifies an InputDevice section name and
# optionally some options to specify the way the device is to be
# used.  Those options include "CorePointer", "CoreKeyboard" and
# "SendCoreEvents".

    InputDevice "Mouse1" "CorePointer"
    InputDevice "Keyboard1" "CoreKeyboard"

EndSection

### EOF ###
Are we on the right track here? Is there something else I need to worry about in the kernel? Is there a way to post my current kernel options here to double check that I don't have any truly bizarre conditions happening? This thing's got me stumped :cry:. Thanks for the help so far... maybe there's a solution yet!
_________________
Life without passion is death in disguise
Back to top
View user's profile Send private message
Wedge_
Advocate
Advocate


Joined: 08 Aug 2002
Posts: 3614
Location: Scotland

PostPosted: Tue Oct 28, 2003 9:53 pm    Post subject: Reply with quote

Quote:
Is there a way to post my current kernel options here to double check that I don't have any truly bizarre conditions happening?

The file "/usr/src/linux/.config" contains your current kernel settings. Can you post your current dmesg output again? (from after the fglrx module is loaded)
_________________
Per Ardua Ad Astra
The Earth is the cradle of the mind, but we cannot live forever in a cradle - Konstantin E. Tsiolkovsky
Gentoo Radeon FAQ
Back to top
View user's profile Send private message
KShots
Guru
Guru


Joined: 09 Oct 2003
Posts: 589
Location: Florida

PostPosted: Wed Oct 29, 2003 10:26 pm    Post subject: Reply with quote

Wedge_ wrote:
Quote:
Is there a way to post my current kernel options here to double check that I don't have any truly bizarre conditions happening?

The file "/usr/src/linux/.config" contains your current kernel settings. Can you post your current dmesg output again? (from after the fglrx module is loaded)
Here's my dmesg output again (after modprobe fglrx):
Code:
root@basilisk rich # dmesg
 000f4000 reserved twice.
hm, page 000f5000 reserved twice.
hm, page 000f1000 reserved twice.
hm, page 000f2000 reserved twice.
On node 0 totalpages: 131056
zone(0): 4096 pages.
zone(1): 126960 pages.
zone(2): 0 pages.
Intel MultiProcessor Specification v1.4
    Virtual Wire compatibility mode.
OEM ID: OEM00000 Product ID: PROD00000000 APIC at: 0xFEE00000
Processor #0 Pentium(tm) Pro APIC version 17
Processor #1 Pentium(tm) Pro APIC version 17
I/O APIC #2 Version 17 at 0xFEC00000.
Processors: 2
Kernel command line: root=/dev/hdb7 video=vesa:ywrap,mtrr vga=0x31B
Initializing CPU#0
Detected 1666.738 MHz processor.
Console: colour dummy device 80x25
Calibrating delay loop... 3322.67 BogoMIPS
Memory: 510900k/524224k available (1450k kernel code, 8716k reserved, 513k data, 128k init, 0k highmem)
Dentry cache hash table entries: 65536 (order: 7, 524288 bytes)
Inode cache hash table entries: 32768 (order: 6, 262144 bytes)
Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
Buffer-cache hash table entries: 32768 (order: 5, 131072 bytes)
Page-cache hash table entries: 131072 (order: 7, 524288 bytes)
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 256K (64 bytes/line)
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU:     After generic, caps: 0383fbff c1cbfbff 00000000 00000000
CPU:             Common caps: 0383fbff c1cbfbff 00000000 00000000
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au)
mtrr: detected mtrr type: Intel
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 256K (64 bytes/line)
Intel machine check reporting enabled on CPU#0.
CPU:     After generic, caps: 0383fbff c1cbfbff 00000000 00000000
CPU:             Common caps: 0383fbff c1cbfbff 00000000 00000000
CPU0: AMD Athlon(tm) MP 2000+ stepping 01
per-CPU timeslice cutoff: 731.44 usecs.
task migration cache decay timeout: 10 msecs.
enabled ExtINT on CPU#0
ESR value before enabling vector: 00000000
ESR value after enabling vector: 00000000
Booting processor 1/1 eip 2000
Initializing CPU#1
masked ExtINT on CPU#1
ESR value before enabling vector: 00000000
ESR value after enabling vector: 00000000
Calibrating delay loop... 3329.22 BogoMIPS
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 256K (64 bytes/line)
Intel machine check reporting enabled on CPU#1.
CPU:     After generic, caps: 0383fbff c1cbfbff 00000000 00000000
CPU:             Common caps: 0383fbff c1cbfbff 00000000 00000000
CPU1: AMD Athlon(tm) MP stepping 01
Total of 2 processors activated (6651.90 BogoMIPS).
ENABLING IO-APIC IRQs
Setting 2 in the phys_id_present_map
...changing IO-APIC physical APIC ID to 2 ... ok.
init IO_APIC IRQs
 IO-APIC (apicid-pin) 2-0, 2-5, 2-10, 2-11, 2-20, 2-21, 2-22, 2-23 not connected.
..TIMER: vector=0x31 pin1=2 pin2=0
number of MP IRQ sources: 18.
number of IO-APIC #2 registers: 24.
testing the IO APIC.......................

IO APIC #2......
.... register #00: 02000000
.......    : physical APIC id: 02
.... register #01: 00170011
.......     : max redirection entries: 0017
.......     : PRQ implemented: 0
.......     : IO APIC version: 0011
.... register #02: 00000000
.......     : arbitration: 00
.... IRQ redirection table:
 NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect:
 00 000 00  1    0    0   0   0    0    0    00
 01 003 03  0    0    0   0   0    1    1    39
 02 003 03  0    0    0   0   0    1    1    31
 03 003 03  0    0    0   0   0    1    1    41
 04 003 03  0    0    0   0   0    1    1    49
 05 000 00  1    0    0   0   0    0    0    00
 06 003 03  0    0    0   0   0    1    1    51
 07 003 03  0    0    0   0   0    1    1    59
 08 003 03  0    0    0   0   0    1    1    61
 09 003 03  0    0    0   0   0    1    1    69
 0a 000 00  1    0    0   0   0    0    0    00
 0b 000 00  1    0    0   0   0    0    0    00
 0c 003 03  0    0    0   0   0    1    1    71
 0d 003 03  0    0    0   0   0    1    1    79
 0e 003 03  0    0    0   0   0    1    1    81
 0f 003 03  0    0    0   0   0    1    1    89
 10 003 03  1    1    0   1   0    1    1    91
 11 003 03  1    1    0   1   0    1    1    99
 12 003 03  1    1    0   1   0    1    1    A1
 13 003 03  1    1    0   1   0    1    1    A9
 14 000 00  1    0    0   0   0    0    0    00
 15 000 00  1    0    0   0   0    0    0    00
 16 000 00  1    0    0   0   0    0    0    00
 17 000 00  1    0    0   0   0    0    0    00
IRQ to pin mappings:
IRQ0 -> 0:2
IRQ1 -> 0:1
IRQ3 -> 0:3
IRQ4 -> 0:4
IRQ6 -> 0:6
IRQ7 -> 0:7
IRQ8 -> 0:8
IRQ9 -> 0:9
IRQ12 -> 0:12
IRQ13 -> 0:13
IRQ14 -> 0:14
IRQ15 -> 0:15
IRQ16 -> 0:16
IRQ17 -> 0:17
IRQ18 -> 0:18
IRQ19 -> 0:19
.................................... done.
Using local APIC timer interrupts.
calibrating APIC timer ...
..... CPU clock speed is 1666.6894 MHz.
..... host bus clock speed is 266.6700 MHz.
cpu: 0, clocks: 2666700, slice: 888900
CPU0<T0:2666688,T1:1777776,D:12,S:888900,C:2666700>
cpu: 1, clocks: 2666700, slice: 888900
CPU1<T0:2666688,T1:888880,D:8,S:888900,C:2666700>
checking TSC synchronization across CPUs: passed.
migration_task 0 on cpu=0
migration_task 1 on cpu=1
mtrr: your CPUs had inconsistent fixed MTRR settings
mtrr: probably your BIOS does not setup all CPUs
PCI: PCI BIOS revision 2.10 entry at 0xfb130, last bus=2
PCI: Using configuration type 1
PCI: Probing PCI hardware
PCI: Probing PCI hardware (bus 00)
PCI: Using IRQ router default [1022/700c] at 00:00.0
PCI->APIC IRQ transform: (B1,I5,P0) -> 17
PCI->APIC IRQ transform: (B2,I0,P3) -> 19
PCI->APIC IRQ transform: (B2,I4,P0) -> 16
PCI->APIC IRQ transform: (B2,I6,P0) -> 18
PCI->APIC IRQ transform: (B2,I6,P1) -> 19
BIOS failed to enable PCI standards compliance, fixing this error.
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x1
parport0: PC-style at 0x378 [PCSPP(,...)]
vesafb: framebuffer at 0xe0000000, mapped to 0xe0800000, size 131072k
vesafb: mode is 1280x1024x24, linelength=3840, pages=33
vesafb: protected mode interface info at c000:5710
vesafb: pmi: set display start = c00c57a4, set palette = c00c57f0
vesafb: pmi: ports = c010 c016 c054 c038 c03c c05c c000 c004 c0b0 c0b2 c0b4
vesafb: scrolling: ywrap using protected mode interface, yres_virtual=34952
vesafb: directcolor: size=0:8:8:8, shift=0:16:8:0
Console: switching to colour frame buffer device 160x64
fb0: VESA VGA frame buffer device
pty: 256 Unix98 ptys configured
Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI enabled
ttyS00 at 0x03f8 (irq = 4) is a 16550A
ttyS01 at 0x02f8 (irq = 3) is a 16550A
amd768_rng: AMD768 system management I/O registers at 0x600.
amd768_rng hardware driver 0.1.0 loaded
Uniform Multi-Platform E-IDE driver Revision: 6.31
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
AMD7441: IDE controller on PCI bus 00 dev 39
AMD7441: chipset revision 4
AMD7441: not 100% native mode: will probe irqs later
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
AMD_IDE: Advanced Micro Devices [AMD] AMD-768 [Opus] IDE (rev 04) UDMA100 controller on pci00:07.1
    ide0: BM-DMA at 0xe000-0xe007, BIOS settings: hda:DMA, hdb:DMA
    ide1: BM-DMA at 0xe008-0xe00f, BIOS settings: hdc:pio, hdd:DMA
hda: SAMSUNG SP1203N, ATA DISK drive
hdb: WDC WD600AB-00BVA0, ATA DISK drive
hdd: CREATIVE DVD-ROM DVD6240E, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
blk: queue c0374fc4, I/O limit 4095Mb (mask 0xffffffff)
hda: 234493056 sectors (120060 MB) w/2048KiB Cache, CHS=14596/255/63, UDMA(100)
blk: queue c0375114, I/O limit 4095Mb (mask 0xffffffff)
hdb: 117231408 sectors (60022 MB) w/2048KiB Cache, CHS=7297/255/63, UDMA(100)
hdd: ATAPI 24X DVD-ROM drive, 512kB Cache, DMA
Uniform CD-ROM driver Revision: 3.12
Partition check:
 /dev/ide/host0/bus0/target0/lun0: p1 p2 < p5 >
 /dev/ide/host0/bus0/target1/lun0: p1 p2 p3 < p5 p6 p7 > p4
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
loop: loaded (max 8 devices)
eepro100.c:v1.09j-t 9/29/99 Donald Becker http://www.scyld.com/network/eepro100.html
eepro100.c: $Revision: 1.36 $ 2000/11/17 Modified by Andrey V. Savochkin <saw@saw.sw.com.sg> and others
eth0: Intel Corp. 82557/8/9 [Ethernet Pro 100], 00:A0:C9:B8:1B:A1, IRQ 16.
  Receiver lock-up bug exists -- enabling work-around.
  Board assembly 678400-001, Physical connectors present: RJ45
  Primary interface chip i82555 PHY #1.
  General self-test: passed.
  Serial sub-system self-test: passed.
  Internal registers self-test: passed.
  ROM checksum self-test: passed (0x49caa8d6).
  Receiver lock-up workaround activated.
usb.c: registered new driver hub
uhci.c: USB Universal Host Controller Interface driver v1.1
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 4096 buckets, 32Kbytes
TCP: Hash tables configured (established 32768 bind 32768)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
RAMDISK: Couldn't find valid RAM disk image starting at 0.
Freeing initrd memory: 404k freed
reiserfs: checking transaction log (device 03:47) ...
Using r5 hash to sort names
ReiserFS version 3.6.25
VFS: Mounted root (reiserfs filesystem) readonly.
Mounted devfs on /dev
Freeing unused kernel memory: 128k freed
Adding Swap: 996020k swap-space (priority -1)
Real Time Clock Driver v1.10e
Linux agpgart interface v0.99 (c) Jeff Hartmann
agpgart: Maximum main memory to use for agp memory: 439M
agpgart: Detected AMD 760MP chipset
agpgart: AGP aperture is 128M @ 0xd8000000
NTFS driver v1.1.22 [Flags: R/O MODULE]
usb.c: registered new driver usblp
printer.c: v0.11: USB Printer Device Class driver
reiserfs: checking transaction log (device 03:42) ...
Using r5 hash to sort names
ReiserFS version 3.6.25
reiserfs: checking transaction log (device 03:45) ...
Using r5 hash to sort names
ReiserFS version 3.6.25
reiserfs: checking transaction log (device 03:46) ...
Using r5 hash to sort names
ReiserFS version 3.6.25
blk: queue c0374fc4, I/O limit 4095Mb (mask 0xffffffff)
blk: queue c0375114, I/O limit 4095Mb (mask 0xffffffff)
hdd: drive_cmd: status=0x51 { DriveReady SeekComplete Error }
hdd: drive_cmd: error=0x04
hdd: drive_cmd: status=0x51 { DriveReady SeekComplete Error }
hdd: drive_cmd: error=0x04
NTFS: Unicode name contains a character that cannot be converted to chosen character set. Remount with utf8 encoding and this should work.
NTFS: Unicode name contains a character that cannot be converted to chosen character set. Remount with utf8 encoding and this should work.
NTFS: Unicode name contains a character that cannot be converted to chosen character set. Remount with utf8 encoding and this should work.
NTFS: Unicode name contains a character that cannot be converted to chosen character set. Remount with utf8 encoding and this should work.
NTFS: Unicode name contains a character that cannot be converted to chosen character set. Remount with utf8 encoding and this should work.
NTFS: Unicode name contains a character that cannot be converted to chosen character set. Remount with utf8 encoding and this should work.
NTFS: Unicode name contains a character that cannot be converted to chosen character set. Remount with utf8 encoding and this should work.
NTFS: Unicode name contains a character that cannot be converted to chosen character set. Remount with utf8 encoding and this should work.
NTFS: Unicode name contains a character that cannot be converted to chosen character set. Remount with utf8 encoding and this should work.
NTFS: Unicode name contains a character that cannot be converted to chosen character set. Remount with utf8 encoding and this should work.
NTFS: Unicode name contains a character that cannot be converted to chosen character set. Remount with utf8 encoding and this should work.
NTFS: Unicode name contains a character that cannot be converted to chosen character set. Remount with utf8 encoding and this should work.
NTFS: Unicode name contains a character that cannot be converted to chosen character set. Remount with utf8 encoding and this should work.
NTFS: Unicode name contains a character that cannot be converted to chosen character set. Remount with utf8 encoding and this should work.
NTFS: Unicode name contains a character that cannot be converted to chosen character set. Remount with utf8 encoding and this should work.
NTFS: Unicode name contains a character that cannot be converted to chosen character set. Remount with utf8 encoding and this should work.
NTFS: Unicode name contains a character that cannot be converted to chosen character set. Remount with utf8 encoding and this should work.
NTFS: Unicode name contains a character that cannot be converted to chosen character set. Remount with utf8 encoding and this should work.
NTFS: Unicode name contains a character that cannot be converted to chosen character set. Remount with utf8 encoding and this should work.
NTFS: Unicode name contains a character that cannot be converted to chosen character set. Remount with utf8 encoding and this should work.
NTFS: Unicode name contains a character that cannot be converted to chosen character set. Remount with utf8 encoding and this should work.
NTFS: Unicode name contains a character that cannot be converted to chosen character set. Remount with utf8 encoding and this should work.
NTFS: Unicode name contains a character that cannot be converted to chosen character set. Remount with utf8 encoding and this should work.
NTFS: Unicode name contains a character that cannot be converted to chosen character set. Remount with utf8 encoding and this should work.
NTFS: Unicode name contains a character that cannot be converted to chosen character set. Remount with utf8 encoding and this should work.
NTFS: Unicode name contains a character that cannot be converted to chosen character set. Remount with utf8 encoding and this should work.
NTFS: Unicode name contains a character that cannot be converted to chosen character set. Remount with utf8 encoding and this should work.
NTFS: Unicode name contains a character that cannot be converted to chosen character set. Remount with utf8 encoding and this should work.
NTFS: Unicode name contains a character that cannot be converted to chosen character set. Remount with utf8 encoding and this should work.
NTFS: Unicode name contains a character that cannot be converted to chosen character set. Remount with utf8 encoding and this should work.
NTFS: Unicode name contains a character that cannot be converted to chosen character set. Remount with utf8 encoding and this should work.
NTFS: Unicode name contains a character that cannot be converted to chosen character set. Remount with utf8 encoding and this should work.
NTFS: Unicode name contains a character that cannot be converted to chosen character set. Remount with utf8 encoding and this should work.
NTFS: Unicode name contains a character that cannot be converted to chosen character set. Remount with utf8 encoding and this should work.
[fglrx] Maximum main memory to use for locked dma buffers: 431 MBytes.
[fglrx] module loaded - fglrx 3.2.8 [Sep 21 2003] on minor 0
root@basilisk rich #
And, just in case, here's the kernel config...
Code:
root@basilisk rich # cat /usr/src/linux/.config
#
# Automatically generated by make menuconfig: don't edit
#
CONFIG_X86=y
# CONFIG_SBUS is not set
CONFIG_UID16=y

#
# Code maturity level options
#
CONFIG_EXPERIMENTAL=y

#
# Loadable module support
#
CONFIG_MODULES=y
CONFIG_MODVERSIONS=y
CONFIG_KMOD=y

#
# Processor type and features
#
CONFIG_LOLAT=y
# CONFIG_LOLAT_SYSCTL is not set
# CONFIG_M386 is not set
# CONFIG_M486 is not set
# CONFIG_M586 is not set
# CONFIG_M586TSC is not set
# CONFIG_M586MMX is not set
# CONFIG_M586MMX31 is not set
# CONFIG_M686 is not set
# CONFIG_MPPRO31 is not set
# CONFIG_M68631 is not set
# CONFIG_MPENTIUMIII is not set
# CONFIG_MPENTIUMIII31 is not set
# CONFIG_MPENTIUM4 is not set
# CONFIG_MPENTIUM431 is not set
# CONFIG_MK6 is not set
# CONFIG_MK6231 is not set
# CONFIG_MK7 is not set
# CONFIG_MK731 is not set
# CONFIG_MXP31 is not set
CONFIG_MMP31=y
# CONFIG_MELAN is not set
# CONFIG_MCRUSOE is not set
# CONFIG_MWINCHIPC6 is not set
# CONFIG_MWINCHIP2 is not set
# CONFIG_MWINCHIP3D is not set
# CONFIG_MCYRIXIII is not set
CONFIG_X86_WP_WORKS_OK=y
CONFIG_X86_INVLPG=y
CONFIG_X86_CMPXCHG=y
CONFIG_X86_XADD=y
CONFIG_X86_BSWAP=y
CONFIG_X86_POPAD_OK=y
# CONFIG_RWSEM_GENERIC_SPINLOCK is not set
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_X86_L1_CACHE_SHIFT=6
CONFIG_X86_HAS_TSC=y
CONFIG_X86_GOOD_APIC=y
CONFIG_X86_USE_3DNOW=y
CONFIG_X86_PGE=y
CONFIG_X86_USE_PPRO_CHECKSUM=y
CONFIG_X86_MCE=y
# CONFIG_TOSHIBA is not set
# CONFIG_I8K is not set
# CONFIG_MICROCODE is not set
CONFIG_X86_MSR=m
CONFIG_X86_CPUID=y
CONFIG_NOHIGHMEM=y
# CONFIG_HIGHMEM4G is not set
# CONFIG_HIGHMEM64G is not set
# CONFIG_HIGHMEM is not set
# CONFIG_MATH_EMULATION is not set
CONFIG_MTRR=y
CONFIG_SMP=y
CONFIG_PREEMPT=y
# CONFIG_MULTIQUAD is not set
# CONFIG_X86_TSC_DISABLE is not set
CONFIG_X86_TSC=y
CONFIG_HAVE_DEC_LOCK=y

#
# General setup
#
CONFIG_NET=y
CONFIG_X86_IO_APIC=y
CONFIG_X86_LOCAL_APIC=y
CONFIG_PCI=y
# CONFIG_PCI_GOBIOS is not set
# CONFIG_PCI_GODIRECT is not set
CONFIG_PCI_GOANY=y
CONFIG_PCI_BIOS=y
CONFIG_PCI_DIRECT=y
# CONFIG_ISA is not set
CONFIG_PCI_NAMES=y
# CONFIG_EISA is not set
# CONFIG_MCA is not set
CONFIG_HOTPLUG=y

#
# PCMCIA/CardBus support
#
# CONFIG_PCMCIA is not set

#
# PCI Hotplug Support
#
# CONFIG_HOTPLUG_PCI is not set
# CONFIG_HOTPLUG_PCI_COMPAQ is not set
# CONFIG_HOTPLUG_PCI_COMPAQ_NVRAM is not set
# CONFIG_HOTPLUG_PCI_IBM is not set
# CONFIG_HOTPLUG_PCI_ACPI is not set
CONFIG_SYSVIPC=y
# CONFIG_BSD_PROCESS_ACCT is not set
CONFIG_SYSCTL=y
CONFIG_KCORE_ELF=y
# CONFIG_KCORE_AOUT is not set
CONFIG_BINFMT_AOUT=y
CONFIG_BINFMT_ELF=y
CONFIG_BINFMT_MISC=y
# CONFIG_PM is not set
# CONFIG_APM is not set

#
# ACPI Support
#
# CONFIG_ACPI is not set

#
# Memory Technology Devices (MTD)
#
# CONFIG_MTD is not set

#
# Parallel port support
#
CONFIG_PARPORT=y
CONFIG_PARPORT_PC=y
CONFIG_PARPORT_PC_CML1=y
# CONFIG_PARPORT_SERIAL is not set
# CONFIG_PARPORT_PC_FIFO is not set
# CONFIG_PARPORT_PC_SUPERIO is not set
# CONFIG_PARPORT_AMIGA is not set
# CONFIG_PARPORT_MFC3 is not set
# CONFIG_PARPORT_ATARI is not set
# CONFIG_PARPORT_GSC is not set
# CONFIG_PARPORT_SUNBPP is not set
# CONFIG_PARPORT_OTHER is not set
# CONFIG_PARPORT_1284 is not set

#
# Plug and Play configuration
#
CONFIG_PNP=y
# CONFIG_ISAPNP is not set

#
# Block devices
#
CONFIG_BLK_DEV_FD=y
# CONFIG_BLK_DEV_XD is not set
# CONFIG_PARIDE is not set
# CONFIG_BLK_CPQ_DA is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_CISS_SCSI_TAPE is not set
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_UMEM is not set
CONFIG_CDROM_PKTCDVD=m
# CONFIG_CDROM_PKTCDVD_WCACHE is not set
CONFIG_BLK_DEV_LOOP=y
# CONFIG_BLK_DEV_NBD is not set
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_SIZE=4096
CONFIG_BLK_DEV_INITRD=y
CONFIG_BLK_STATS=y

#
# Multi-device support (RAID and LVM)
#
# CONFIG_MD is not set
# CONFIG_BLK_DEV_MD is not set
# CONFIG_MD_LINEAR is not set
# CONFIG_MD_RAID0 is not set
# CONFIG_MD_RAID1 is not set
# CONFIG_MD_RAID5 is not set
# CONFIG_MD_MULTIPATH is not set
# CONFIG_BLK_DEV_LVM is not set

#
# Networking options
#
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
# CONFIG_NETLINK_DEV is not set
# CONFIG_NETFILTER is not set
# CONFIG_FILTER is not set
CONFIG_UNIX=y
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
# CONFIG_IP_ADVANCED_ROUTER is not set
# CONFIG_IP_PNP is not set
# CONFIG_NET_IPIP is not set
# CONFIG_NET_IPGRE is not set
# CONFIG_IP_MROUTE is not set
# CONFIG_ARPD is not set
# CONFIG_INET_ECN is not set
# CONFIG_SYN_COOKIES is not set
# CONFIG_IPV6 is not set
# CONFIG_KHTTPD is not set
# CONFIG_ATM is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_IPX is not set
# CONFIG_ATALK is not set

#
# Appletalk devices
#
# CONFIG_DEV_APPLETALK is not set
# CONFIG_DECNET is not set
# CONFIG_BRIDGE is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_LLC is not set
# CONFIG_NET_DIVERT is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_NET_FASTROUTE is not set
# CONFIG_NET_HW_FLOWCONTROL is not set

#
# QoS and/or fair queueing
#
# CONFIG_NET_SCHED is not set

#
# Network testing
#
# CONFIG_NET_PKTGEN is not set

#
# Telephony Support
#
# CONFIG_PHONE is not set
# CONFIG_PHONE_IXJ is not set
# CONFIG_PHONE_IXJ_PCMCIA is not set

#
# ATA/IDE/MFM/RLL support
#
CONFIG_IDE=y

#
# IDE, ATA and ATAPI Block devices
#
CONFIG_BLK_DEV_IDE=y
# CONFIG_BLK_DEV_HD_IDE is not set
# CONFIG_BLK_DEV_HD is not set
CONFIG_BLK_DEV_IDEDISK=y
CONFIG_IDEDISK_MULTI_MODE=y
# CONFIG_IDEDISK_STROKE is not set
# CONFIG_BLK_DEV_IDEDISK_VENDOR is not set
# CONFIG_BLK_DEV_IDEDISK_FUJITSU is not set
# CONFIG_BLK_DEV_IDEDISK_IBM is not set
# CONFIG_BLK_DEV_IDEDISK_MAXTOR is not set
# CONFIG_BLK_DEV_IDEDISK_QUANTUM is not set
# CONFIG_BLK_DEV_IDEDISK_SEAGATE is not set
# CONFIG_BLK_DEV_IDEDISK_WD is not set
# CONFIG_BLK_DEV_COMMERIAL is not set
# CONFIG_BLK_DEV_TIVO is not set
# CONFIG_BLK_DEV_IDECS is not set
CONFIG_BLK_DEV_IDECD=y
# CONFIG_BLK_DEV_IDETAPE is not set
# CONFIG_BLK_DEV_IDEFLOPPY is not set
# CONFIG_BLK_DEV_IDESCSI is not set
# CONFIG_IDE_TASK_IOCTL is not set
# CONFIG_BLK_DEV_CMD640 is not set
# CONFIG_BLK_DEV_CMD640_ENHANCED is not set
# CONFIG_BLK_DEV_ISAPNP is not set
# CONFIG_BLK_DEV_RZ1000 is not set
CONFIG_BLK_DEV_IDEPCI=y
CONFIG_IDEPCI_SHARE_IRQ=y
CONFIG_BLK_DEV_IDEDMA_PCI=y
# CONFIG_BLK_DEV_OFFBOARD is not set
# CONFIG_BLK_DEV_IDEDMA_FORCED is not set
CONFIG_IDEDMA_PCI_AUTO=y
# CONFIG_IDEDMA_ONLYDISK is not set
CONFIG_BLK_DEV_IDEDMA=y
# CONFIG_IDEDMA_PCI_WIP is not set
# CONFIG_BLK_DEV_IDEDMA_TIMEOUT is not set
# CONFIG_IDEDMA_NEW_DRIVE_LISTINGS is not set
CONFIG_BLK_DEV_ADMA=y
# CONFIG_BLK_DEV_AEC62XX is not set
# CONFIG_AEC62XX_TUNING is not set
# CONFIG_BLK_DEV_ALI15X3 is not set
# CONFIG_WDC_ALI15X3 is not set
CONFIG_BLK_DEV_AMD74XX=y
# CONFIG_BLK_DEV_CMD64X is not set
# CONFIG_BLK_DEV_CMD680 is not set
# CONFIG_BLK_DEV_CY82C693 is not set
# CONFIG_BLK_DEV_CS5530 is not set
# CONFIG_BLK_DEV_HPT34X is not set
# CONFIG_HPT34X_AUTODMA is not set
# CONFIG_BLK_DEV_HPT366 is not set
# CONFIG_BLK_DEV_PIIX is not set
# CONFIG_PIIX_TUNING is not set
# CONFIG_BLK_DEV_NS87415 is not set
# CONFIG_BLK_DEV_OPTI621 is not set
# CONFIG_BLK_DEV_PDC202XX is not set
# CONFIG_PDC202XX_BURST is not set
# CONFIG_PDC202XX_FORCE is not set
# CONFIG_BLK_DEV_SVWKS is not set
# CONFIG_BLK_DEV_SIS5513 is not set
# CONFIG_BLK_DEV_SLC90E66 is not set
# CONFIG_BLK_DEV_TRM290 is not set
# CONFIG_BLK_DEV_VIA82CXXX is not set
# CONFIG_IDE_CHIPSETS is not set
CONFIG_IDEDMA_AUTO=y
# CONFIG_IDEDMA_IVB is not set
# CONFIG_DMA_NONPCI is not set
CONFIG_BLK_DEV_IDE_MODES=y
# CONFIG_BLK_DEV_ATARAID is not set
# CONFIG_BLK_DEV_ATARAID_PDC is not set
# CONFIG_BLK_DEV_ATARAID_HPT is not set

#
# SCSI support
#
# CONFIG_SCSI is not set

#
# Fusion MPT device support
#
# CONFIG_FUSION is not set
# CONFIG_FUSION_BOOT is not set
# CONFIG_FUSION_ISENSE is not set
# CONFIG_FUSION_CTL is not set
# CONFIG_FUSION_LAN is not set

#
# IEEE 1394 (FireWire) support (EXPERIMENTAL)
#
CONFIG_IEEE1394=m
# CONFIG_IEEE1394_OHCI1394 is not set
# CONFIG_IEEE1394_VIDEO1394 is not set
# CONFIG_IEEE1394_SBP2 is not set
# CONFIG_IEEE1394_ETH1394 is not set
# CONFIG_IEEE1394_DV1394 is not set
# CONFIG_IEEE1394_RAWIO is not set
# CONFIG_IEEE1394_CMP is not set
# CONFIG_IEEE1394_VERBOSEDEBUG is not set

#
# I2O device support
#
# CONFIG_I2O is not set
# CONFIG_I2O_PCI is not set
# CONFIG_I2O_BLOCK is not set
# CONFIG_I2O_LAN is not set
# CONFIG_I2O_SCSI is not set
# CONFIG_I2O_PROC is not set

#
# Network device support
#
CONFIG_NETDEVICES=y

#
# ARCnet devices
#
# CONFIG_ARCNET is not set
CONFIG_DUMMY=m
# CONFIG_BONDING is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
# CONFIG_ETHERTAP is not set

#
# Ethernet (10 or 100Mbit)
#
CONFIG_NET_ETHERNET=y
# CONFIG_SUNLANCE is not set
# CONFIG_HAPPYMEAL is not set
# CONFIG_SUNBMAC is not set
# CONFIG_SUNQE is not set
# CONFIG_SUNGEM is not set
# CONFIG_NET_VENDOR_3COM is not set
# CONFIG_LANCE is not set
# CONFIG_NET_VENDOR_SMC is not set
# CONFIG_NET_VENDOR_RACAL is not set
# CONFIG_HP100 is not set
# CONFIG_NET_ISA is not set
CONFIG_NET_PCI=y
# CONFIG_PCNET32 is not set
# CONFIG_ADAPTEC_STARFIRE is not set
# CONFIG_APRICOT is not set
# CONFIG_NET_BCM4400 is not set
# CONFIG_CS89x0 is not set
# CONFIG_TULIP is not set
# CONFIG_DE4X5 is not set
# CONFIG_DGRS is not set
# CONFIG_DM9102 is not set
CONFIG_EEPRO100=y
# CONFIG_E100 is not set
# CONFIG_LNE390 is not set
# CONFIG_FEALNX is not set
# CONFIG_NATSEMI is not set
# CONFIG_NE2K_PCI is not set
# CONFIG_NE3210 is not set
# CONFIG_ES3210 is not set
# CONFIG_8139CP is not set
# CONFIG_8139TOO is not set
# CONFIG_8139TOO_PIO is not set
# CONFIG_8139TOO_TUNE_TWISTER is not set
# CONFIG_8139TOO_8129 is not set
# CONFIG_8139_OLD_RX_RESET is not set
# CONFIG_SIS900 is not set
# CONFIG_EPIC100 is not set
# CONFIG_SUNDANCE is not set
# CONFIG_SUNDANCE_MMIO is not set
# CONFIG_TLAN is not set
# CONFIG_TC35815 is not set
# CONFIG_VIA_RHINE is not set
# CONFIG_VIA_RHINE_MMIO is not set
# CONFIG_WINBOND_840 is not set
# CONFIG_NET_POCKET is not set

#
# Ethernet (1000 Mbit)
#
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
# CONFIG_E1000 is not set
# CONFIG_MYRI_SBUS is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_SK98LIN is not set
# CONFIG_NET_BROADCOM is not set
# CONFIG_TIGON3 is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
# CONFIG_PLIP is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set

#
# Wireless LAN (non-hamradio)
#
# CONFIG_NET_RADIO is not set

#
# Token Ring devices
#
# CONFIG_TR is not set
# CONFIG_NET_FC is not set
# CONFIG_RCPCI is not set
# CONFIG_SHAPER is not set

#
# Wan interfaces
#
# CONFIG_WAN is not set

#
# Amateur Radio support
#
# CONFIG_HAMRADIO is not set

#
# IrDA (infrared) support
#
# CONFIG_IRDA is not set

#
# ISDN subsystem
#
# CONFIG_ISDN is not set

#
# Input core support
#
# CONFIG_INPUT is not set
# CONFIG_INPUT_KEYBDEV is not set
# CONFIG_INPUT_MOUSEDEV is not set
# CONFIG_INPUT_JOYDEV is not set
# CONFIG_INPUT_EVDEV is not set

#
# Character devices
#
CONFIG_VT=y
CONFIG_VT_CONSOLE=y
CONFIG_SERIAL=y
CONFIG_SERIAL_CONSOLE=y
# CONFIG_SERIAL_EXTENDED is not set
# CONFIG_SERIAL_NONSTANDARD is not set
CONFIG_UNIX98_PTYS=y
CONFIG_UNIX98_PTY_COUNT=256
# CONFIG_PRINTER is not set
# CONFIG_PPDEV is not set

#
# I2C support
#
# CONFIG_I2C is not set

#
# Mice
#
# CONFIG_BUSMOUSE is not set
CONFIG_MOUSE=y
CONFIG_PSMOUSE=y
# CONFIG_82C710_MOUSE is not set
# CONFIG_PC110_PAD is not set
# CONFIG_MK712_MOUSE is not set

#
# Joysticks
#
# CONFIG_INPUT_GAMEPORT is not set
# CONFIG_QIC02_TAPE is not set

#
# Watchdog Cards
#
# CONFIG_WATCHDOG is not set
CONFIG_AMD_RNG=y
# CONFIG_INTEL_RNG is not set
# CONFIG_AMD_PM768 is not set
# CONFIG_NVRAM is not set
CONFIG_RTC=m
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
# CONFIG_SONYPI is not set

#
# Ftape, the floppy tape device driver
#
# CONFIG_FTAPE is not set
CONFIG_AGP=m
# CONFIG_AGP_INTEL is not set
# CONFIG_AGP_I810 is not set
# CONFIG_AGP_VIA is not set
CONFIG_AGP_AMD=y
# CONFIG_AGP_AMD_8151 is not set
# CONFIG_AGP_SIS is not set
# CONFIG_AGP_ALI is not set
# CONFIG_AGP_SWORKS is not set
# CONFIG_DRM is not set
# CONFIG_MWAVE is not set

#
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set

#
# File systems
#
# CONFIG_QUOTA is not set
# CONFIG_QFMT_V1 is not set
# CONFIG_QFMT_V2 is not set
# CONFIG_QIFACE_COMPAT is not set
# CONFIG_AUTOFS_FS is not set
CONFIG_AUTOFS4_FS=y
CONFIG_REISERFS_FS=y
# CONFIG_REISERFS_CHECK is not set
# CONFIG_REISERFS_PROC_INFO is not set
# CONFIG_SUPERMOUNT is not set
# CONFIG_ADFS_FS is not set
# CONFIG_ADFS_FS_RW is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_BEFS_FS is not set
# CONFIG_BEFS_DEBUG is not set
# CONFIG_BFS_FS is not set
# CONFIG_EXT3_FS is not set
# CONFIG_JBD is not set
# CONFIG_JBD_DEBUG is not set
CONFIG_FAT_FS=m
# CONFIG_MSDOS_FS is not set
# CONFIG_UMSDOS_FS is not set
CONFIG_VFAT_FS=m
# CONFIG_EFS_FS is not set
# CONFIG_JFFS_FS is not set
# CONFIG_JFFS2_FS is not set
# CONFIG_CRAMFS is not set
CONFIG_TMPFS=y
CONFIG_RAMFS=y
CONFIG_ISO9660_FS=y
# CONFIG_JOLIET is not set
# CONFIG_ZISOFS is not set
# CONFIG_JFS_FS is not set
# CONFIG_JFS_DEBUG is not set
# CONFIG_JFS_STATISTICS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_VXFS_FS is not set
CONFIG_NTFS_FS=m
# CONFIG_NTFS_RW is not set
# CONFIG_HPFS_FS is not set
CONFIG_PROC_FS=y
CONFIG_DEVFS_FS=y
CONFIG_DEVFS_MOUNT=y
# CONFIG_DEVFS_DEBUG is not set
# CONFIG_DEVPTS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_QNX4FS_RW is not set
# CONFIG_ROMFS_FS is not set
# CONFIG_EXT2_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UDF_FS is not set
# CONFIG_UDF_RW is not set
# CONFIG_UFS_FS is not set
# CONFIG_UFS_FS_WRITE is not set
# CONFIG_XFS_FS is not set
# CONFIG_XFS_POSIX_ACL is not set
# CONFIG_XFS_RT is not set
# CONFIG_XFS_QUOTA is not set
# CONFIG_XFS_DMAPI is not set
# CONFIG_XFS_DEBUG is not set
# CONFIG_PAGEBUF_DEBUG is not set

#
# Network File Systems
#
# CONFIG_CODA_FS is not set
# CONFIG_INTERMEZZO_FS is not set
# CONFIG_NFS_FS is not set
# CONFIG_NFS_V3 is not set
# CONFIG_ROOT_NFS is not set
# CONFIG_NFSD is not set
# CONFIG_NFSD_V3 is not set
# CONFIG_NFSD_TCP is not set
# CONFIG_SUNRPC is not set
# CONFIG_LOCKD is not set
# CONFIG_SMB_FS is not set
# CONFIG_NCP_FS is not set
# CONFIG_NCPFS_PACKET_SIGNING is not set
# CONFIG_NCPFS_IOCTL_LOCKING is not set
# CONFIG_NCPFS_STRONG is not set
# CONFIG_NCPFS_NFS_NS is not set
# CONFIG_NCPFS_OS2_NS is not set
# CONFIG_NCPFS_SMALLDOS is not set
# CONFIG_NCPFS_NLS is not set
# CONFIG_NCPFS_EXTRAS is not set
# CONFIG_ZISOFS_FS is not set

#
# Partition Types
#
# CONFIG_PARTITION_ADVANCED is not set
CONFIG_MSDOS_PARTITION=y
# CONFIG_SMB_NLS is not set
CONFIG_NLS=y

#
# Native Language Support
#
CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=y
# CONFIG_NLS_CODEPAGE_737 is not set
# CONFIG_NLS_CODEPAGE_775 is not set
# CONFIG_NLS_CODEPAGE_850 is not set
# CONFIG_NLS_CODEPAGE_852 is not set
# CONFIG_NLS_CODEPAGE_855 is not set
# CONFIG_NLS_CODEPAGE_857 is not set
# CONFIG_NLS_CODEPAGE_860 is not set
# CONFIG_NLS_CODEPAGE_861 is not set
# CONFIG_NLS_CODEPAGE_862 is not set
# CONFIG_NLS_CODEPAGE_863 is not set
# CONFIG_NLS_CODEPAGE_864 is not set
# CONFIG_NLS_CODEPAGE_865 is not set
# CONFIG_NLS_CODEPAGE_866 is not set
# CONFIG_NLS_CODEPAGE_869 is not set
# CONFIG_NLS_CODEPAGE_936 is not set
# CONFIG_NLS_CODEPAGE_950 is not set
# CONFIG_NLS_CODEPAGE_932 is not set
# CONFIG_NLS_CODEPAGE_949 is not set
# CONFIG_NLS_CODEPAGE_874 is not set
# CONFIG_NLS_ISO8859_8 is not set
# CONFIG_NLS_CODEPAGE_1250 is not set
# CONFIG_NLS_CODEPAGE_1251 is not set
CONFIG_NLS_ISO8859_1=y
# CONFIG_NLS_ISO8859_2 is not set
# CONFIG_NLS_ISO8859_3 is not set
# CONFIG_NLS_ISO8859_4 is not set
# CONFIG_NLS_ISO8859_5 is not set
# CONFIG_NLS_ISO8859_6 is not set
# CONFIG_NLS_ISO8859_7 is not set
# CONFIG_NLS_ISO8859_9 is not set
# CONFIG_NLS_ISO8859_13 is not set
# CONFIG_NLS_ISO8859_14 is not set
# CONFIG_NLS_ISO8859_15 is not set
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not set
# CONFIG_NLS_UTF8 is not set

#
# Console drivers
#
CONFIG_VGA_CONSOLE=y
CONFIG_VIDEO_SELECT=y
# CONFIG_MDA_CONSOLE is not set

#
# Frame-buffer support
#
CONFIG_FB=y
CONFIG_DUMMY_CONSOLE=y
# CONFIG_FB_LOGO_TUX is not set
# CONFIG_FB_LOGO_LARRY is not set
CONFIG_FB_LOGO_GENTOO=y
# CONFIG_FB_LOGO_G is not set
# CONFIG_FB_LOGO_PENGUIN is not set
# CONFIG_FB_LOGO_POWEREDBY is not set
# CONFIG_FB_RIVA is not set
# CONFIG_FB_CLGEN is not set
# CONFIG_FB_PM2 is not set
# CONFIG_FB_PM3 is not set
# CONFIG_FB_CYBER2000 is not set
CONFIG_FB_VESA=y
# CONFIG_FB_VGA16 is not set
# CONFIG_FB_HGA is not set
CONFIG_VIDEO_SELECT=y
# CONFIG_FB_MATROX is not set
# CONFIG_FB_ATY is not set
# CONFIG_FB_RADEON is not set
# CONFIG_FB_ATY128 is not set
# CONFIG_FB_SIS is not set
# CONFIG_FB_NEOMAGIC is not set
# CONFIG_FB_3DFX is not set
# CONFIG_FB_VOODOO1 is not set
# CONFIG_FB_TRIDENT is not set
# CONFIG_FB_VIRTUAL is not set
CONFIG_FBCON_SPLASHSCREEN=y
CONFIG_FBCON_CFB16=y
# CONFIG_FBCON_ADVANCED is not set
CONFIG_FBCON_CFB8=y
CONFIG_FBCON_CFB16=y
CONFIG_FBCON_CFB24=y
CONFIG_FBCON_CFB32=y
# CONFIG_FBCON_FONTWIDTH8_ONLY is not set
# CONFIG_FBCON_FONTS is not set
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y

#
# Sound
#
CONFIG_SOUND=m
# CONFIG_SOUND_ALI5455 is not set
# CONFIG_SOUND_BT878 is not set
# CONFIG_SOUND_CMPCI is not set
# CONFIG_SOUND_EMU10K1 is not set
# CONFIG_MIDI_EMU10K1 is not set
# CONFIG_SOUND_FUSION is not set
# CONFIG_SOUND_CS4281 is not set
# CONFIG_SOUND_ES1370 is not set
# CONFIG_SOUND_ES1371 is not set
# CONFIG_SOUND_ESSSOLO1 is not set
# CONFIG_SOUND_MAESTRO is not set
# CONFIG_SOUND_MAESTRO3 is not set
# CONFIG_SOUND_FORTE is not set
# CONFIG_SOUND_ICH is not set
# CONFIG_SOUND_RME96XX is not set
# CONFIG_SOUND_SONICVIBES is not set
# CONFIG_SOUND_TRIDENT is not set
# CONFIG_SOUND_MSNDCLAS is not set
# CONFIG_SOUND_MSNDPIN is not set
# CONFIG_SOUND_VIA82CXXX is not set
# CONFIG_MIDI_VIA82CXXX is not set
# CONFIG_SOUND_OSS is not set
# CONFIG_SOUND_TVMIXER is not set

#
# USB support
#
CONFIG_USB=y
# CONFIG_USB_DEBUG is not set
# CONFIG_USB_DEVICEFS is not set
# CONFIG_USB_BANDWIDTH is not set
# CONFIG_USB_LONG_TIMEOUT is not set
# CONFIG_USB_EHCI_HCD is not set
CONFIG_USB_UHCI_ALT=y
# CONFIG_USB_OHCI is not set
# CONFIG_USB_AUDIO is not set
# CONFIG_USB_EMI26 is not set
# CONFIG_USB_BLUETOOTH is not set
# CONFIG_USB_MIDI is not set
# CONFIG_USB_STORAGE is not set
# CONFIG_USB_STORAGE_DEBUG is not set
# CONFIG_USB_STORAGE_DATAFAB is not set
# CONFIG_USB_STORAGE_FREECOM is not set
# CONFIG_USB_STORAGE_ISD200 is not set
# CONFIG_USB_STORAGE_DPCM is not set
# CONFIG_USB_STORAGE_HP8200e is not set
# CONFIG_USB_STORAGE_SDDR09 is not set
# CONFIG_USB_STORAGE_SDDR55 is not set
# CONFIG_USB_STORAGE_JUMPSHOT is not set
# CONFIG_USB_ACM is not set
CONFIG_USB_PRINTER=m
CONFIG_USB_HID=m
# CONFIG_USB_HIDINPUT is not set
# CONFIG_USB_HIDDEV is not set
# CONFIG_USB_KBD is not set
# CONFIG_USB_MOUSE is not set
# CONFIG_USB_AIPTEK is not set
# CONFIG_USB_WACOM is not set
# CONFIG_USB_DC2XX is not set
# CONFIG_USB_MDC800 is not set
# CONFIG_USB_SCANNER is not set
# CONFIG_USB_MICROTEK is not set
# CONFIG_USB_HPUSBSCSI is not set
# CONFIG_USB_PEGASUS is not set
# CONFIG_USB_RTL8150 is not set
# CONFIG_USB_KAWETH is not set
# CONFIG_USB_CATC is not set
# CONFIG_USB_CDCETHER is not set
# CONFIG_USB_USBNET is not set
# CONFIG_USB_USS720 is not set

#
# USB Serial Converter support
#
# CONFIG_USB_SERIAL is not set
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_AUERSWALD is not set
# CONFIG_USB_TIGL is not set
# CONFIG_USB_BRLVGER is not set
# CONFIG_USB_LCD is not set

#
# Bluetooth support
#
# CONFIG_BLUEZ is not set

#
# Kernel hacking
#
# CONFIG_DEBUG_KERNEL is not set

#
# Library routines
#
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
root@basilisk rich #
I hope this sheds some light to someone... :)
_________________
Life without passion is death in disguise
Back to top
View user's profile Send private message
Wedge_
Advocate
Advocate


Joined: 08 Aug 2002
Posts: 3614
Location: Scotland

PostPosted: Thu Oct 30, 2003 9:19 am    Post subject: Reply with quote

Your dmesg output looks fine, and I don't see any problems with your kernel config either. Are you still getting the list of drivers in your XFree log? Does it make any difference if you set "UseInternalAGPGART" to "yes" in your XF86Config?
_________________
Per Ardua Ad Astra
The Earth is the cradle of the mind, but we cannot live forever in a cradle - Konstantin E. Tsiolkovsky
Gentoo Radeon FAQ
Back to top
View user's profile Send private message
KShots
Guru
Guru


Joined: 09 Oct 2003
Posts: 589
Location: Florida

PostPosted: Thu Oct 30, 2003 9:43 pm    Post subject: Reply with quote

Yeah, it's still showing all the other drivers. Changing the flag on "UseInternalAGPGART" didn't seem to have any affect either. As this card is still a bit on the expensive side, has anyone else even tried it? If you've had success with this card, could you please post such - I suspect maybe the drivers simply aren't compatible with the 9800 pro yet...
_________________
Life without passion is death in disguise
Back to top
View user's profile Send private message
Wedge_
Advocate
Advocate


Joined: 08 Aug 2002
Posts: 3614
Location: Scotland

PostPosted: Fri Oct 31, 2003 9:33 am    Post subject: Reply with quote

It does definitely support the 9800 Pro, that's what I'm using. There are several other people on the forums who also have the same card. I don't have much time to post just now, I'll see if I can think of anything else later.
_________________
Per Ardua Ad Astra
The Earth is the cradle of the mind, but we cannot live forever in a cradle - Konstantin E. Tsiolkovsky
Gentoo Radeon FAQ
Back to top
View user's profile Send private message
Wedge_
Advocate
Advocate


Joined: 08 Aug 2002
Posts: 3614
Location: Scotland

PostPosted: Fri Oct 31, 2003 11:29 am    Post subject: Reply with quote

The log you posted is weird - it doesn't actually list the fglrx driver anywhere, so it's not even as if it tried to load the driver and then couldn't find any compatible devices. Can you check that the files are actually in the correct places? Try
Code:
find /usr/share/X11R6 -iname 'fglrx*'
and you should see a few files. I'm not on a Gentoo box at the moment so I can't check exactly where the files are.
_________________
Per Ardua Ad Astra
The Earth is the cradle of the mind, but we cannot live forever in a cradle - Konstantin E. Tsiolkovsky
Gentoo Radeon FAQ
Back to top
View user's profile Send private message
KShots
Guru
Guru


Joined: 09 Oct 2003
Posts: 589
Location: Florida

PostPosted: Fri Oct 31, 2003 4:09 pm    Post subject: Reply with quote

Wedge_ wrote:
The log you posted is weird - it doesn't actually list the fglrx driver anywhere, so it's not even as if it tried to load the driver and then couldn't find any compatible devices. Can you check that the files are actually in the correct places? Try
Code:
find /usr/share/X11R6 -iname 'fglrx*'
and you should see a few files. I'm not on a Gentoo box at the moment so I can't check exactly where the files are.


X11R6 directory does not exist under share, but I found it under /usr/X11R6. Ran
Code:
find /usr/X11R6 -iname 'fglrx*'
, which gave
Code:
rich@basilisk app-office $ find /usr/X11R6 -iname 'fglrx*'
/usr/X11R6/lib/modules/dri/fglrx_dri.so
/usr/X11R6/lib/modules/drivers/fglrx_drv.o
/usr/X11R6/include/X11/extensions/fglrx_gamma.h
rich@basilisk app-office $
Looks like they are there. If the card works with you then that means that obviously the drivers are supposed to work here... I'm stumped :(.

Anyways, just for giggles, I'll go ahead and put in a sym-link for /usr/share/X11R6 to work... I can't imagine that's the problem, but it can't hurt
_________________
Life without passion is death in disguise
Back to top
View user's profile Send private message
Wedge_
Advocate
Advocate


Joined: 08 Aug 2002
Posts: 3614
Location: Scotland

PostPosted: Fri Oct 31, 2003 4:27 pm    Post subject: Reply with quote

I think I just gave you the wrong directory in the first place :oops: It looks like the files are in the right places.

This is just a random suggestion, I have no idea if it'll make any difference, but try compiling a kernel without SMP support and see what happens.

You could also try a newer kernel. If you don't want to go for 2.6, try a 2.4.22 based version. If you want to give 2.6 a go, I can try to help with any problems you might run into.
_________________
Per Ardua Ad Astra
The Earth is the cradle of the mind, but we cannot live forever in a cradle - Konstantin E. Tsiolkovsky
Gentoo Radeon FAQ
Back to top
View user's profile Send private message
bert_
n00b
n00b


Joined: 05 Nov 2003
Posts: 12

PostPosted: Thu Nov 06, 2003 4:27 am    Post subject: Reply with quote

did this get resolved?

this is the same problem I was having.
Back to top
View user's profile Send private message
Display posts from previous:   
Reply to topic    Gentoo Forums Forum Index Desktop Environments All times are GMT
Goto page 1, 2  Next
Page 1 of 2

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum