Page 1 of 1
Nie wykrywa baterii.
Posted: Tue Apr 11, 2006 12:07 pm
by tom000
Moj linux ma problem z wykryciem baterii. Postepowalem zgodnie z tym:
http://www.gentoo.org/doc/pl/power-management-guide.xml.
Jak chce sprawdzic stan baterii:
Code: Select all
grep capacity /proc/acpi/battery/BAT0/info
to wyskakuje mi informacje, ze nie znaleziono pliku.
I faktycznie go nie ma. uruchamiam:
to sie okazuje, ze folder jest pusty.
acpi wykrywa mi zmiany w sposobie zasilania. Przy uruchomionym acpi_listen, po odlaczeniu i podlaczeniu zasilania dostaje informacje:
Code: Select all
ac_adapter ADP1 00000080 000000ff
ac_adapter ADP1 00000080 000000ff
. Z tego co wiem, to ADP1, to wlasnie zasilanie, ale nie dostaje informacji, ze przelaczono na baterie (nie wiem, czy powinna byc, ale wydaje mi sie ze tak).
Posted: Tue Apr 11, 2006 12:57 pm
by Raku
Moved from Polish to Instalacja i sprzęt.
Posted: Tue Apr 11, 2006 4:59 pm
by joker
a jaki to laptop?
Posted: Tue Apr 11, 2006 7:38 pm
by tom000
Uzywam Acer TravelMate z serii 2410. Dodam, ze w Ubuntu nie mialem problemow z bateria. Tzn nie wiem, czy byl tam ten folder/plik, ale wiem, ze mialem ikonke, ktora powiadamiala mnie ile baterii zostalo po odlaczeniu zasilania.
Dodam jeszcze log z /var/log/acpid po wyciagnieciu i wlo
żeniu zasilania:
Code: Select all
[Tue Apr 11 21:47:22 2006] received event "ac_adapter ADP1 00000080 000000ff"
[Tue Apr 11 21:47:22 2006] notifying client 7990[102:409]
[Tue Apr 11 21:47:22 2006] executing action "/etc/acpi/default.sh ac_adapter ADP1 00000080 000000ff"
[Tue Apr 11 21:47:22 2006] BEGIN HANDLER MESSAGES
[Tue Apr 11 21:47:23 2006] END HANDLER MESSAGES
[Tue Apr 11 21:47:23 2006] action exited with status 0
[Tue Apr 11 21:47:23 2006] completed event "ac_adapter ADP1 00000080 000000ff"
[Tue Apr 11 21:47:26 2006] received event "ac_adapter ADP1 00000080 000000ff"
[Tue Apr 11 21:47:26 2006] notifying client 7990[102:409]
[Tue Apr 11 21:47:26 2006] executing action "/etc/acpi/default.sh ac_adapter ADP1 00000080 000000ff"
[Tue Apr 11 21:47:26 2006] BEGIN HANDLER MESSAGES
[Tue Apr 11 21:47:26 2006] END HANDLER MESSAGES
[Tue Apr 11 21:47:26 2006] action exited with status 0
[Tue Apr 11 21:47:26 2006] completed event "ac_adapter ADP1 00000080 000000ff"
code && ort
Posted: Wed Apr 12, 2006 12:55 am
by psycepa
zapodaj moze konfig jadra, nieistotne rzeczy wytnij
pokaz co da
Posted: Wed Apr 12, 2006 7:26 am
by tom000
/etc/init.d/acpid status
/usr/src/linux/.config
Code: Select all
#
# Power management options (ACPI, APM)
#
CONFIG_PM=y
CONFIG_PM_LEGACY=y
CONFIG_PM_DEBUG=y
#
# ACPI (Advanced Configuration and Power Interface) Support
#
CONFIG_ACPI=y
CONFIG_ACPI_AC=y
CONFIG_ACPI_BATTERY=y
CONFIG_ACPI_BUTTON=m
CONFIG_ACPI_VIDEO=y
# CONFIG_ACPI_HOTKEY is not set
CONFIG_ACPI_FAN=m
CONFIG_ACPI_PROCESSOR=m
CONFIG_ACPI_THERMAL=m
# CONFIG_ACPI_ASUS is not set
# CONFIG_ACPI_IBM is not set
# CONFIG_ACPI_TOSHIBA is not set
CONFIG_ACPI_BLACKLIST_YEAR=0
# CONFIG_ACPI_DEBUG is not set
CONFIG_ACPI_EC=y
CONFIG_ACPI_POWER=y
CONFIG_ACPI_SYSTEM=y
# CONFIG_X86_PM_TIMER is not set
CONFIG_ACPI_CONTAINER=y
#
# APM (Advanced Power Management) BIOS Support
#
# CONFIG_APM is not set
#
# CPU Frequency scaling
#
CONFIG_CPU_FREQ=y
CONFIG_CPU_FREQ_TABLE=y
# CONFIG_CPU_FREQ_DEBUG is not set
CONFIG_CPU_FREQ_STAT=y
# CONFIG_CPU_FREQ_STAT_DETAILS is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE=y
CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
CONFIG_CPU_FREQ_GOV_POWERSAVE=y
CONFIG_CPU_FREQ_GOV_USERSPACE=y
CONFIG_CPU_FREQ_GOV_ONDEMAND=y
# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set
#
# CPUFreq processor drivers
#
CONFIG_X86_ACPI_CPUFREQ=m
# CONFIG_X86_POWERNOW_K6 is not set
# CONFIG_X86_POWERNOW_K7 is not set
# CONFIG_X86_POWERNOW_K8 is not set
# CONFIG_X86_GX_SUSPMOD is not set
# CONFIG_X86_SPEEDSTEP_CENTRINO is not set
# CONFIG_X86_SPEEDSTEP_ICH is not set
CONFIG_X86_SPEEDSTEP_SMI=y
# CONFIG_X86_P4_CLOCKMOD is not set
# CONFIG_X86_CPUFREQ_NFORCE2 is not set
# CONFIG_X86_LONGRUN is not set
# CONFIG_X86_LONGHAUL is not set
#
# shared options
#
# CONFIG_X86_ACPI_CPUFREQ_PROC_INTF is not set
CONFIG_X86_SPEEDSTEP_LIB=y
# CONFIG_X86_SPEEDSTEP_RELAXED_CAP_CHECK is not set
Posted: Wed Apr 12, 2006 5:26 pm
by RedHand
A dodaj do startu kernelka taką opcję:
Ja mam Aspire 5024 i musiałem takie coś dodać], że by móc odczytać stan baterii.
Posted: Thu Apr 13, 2006 1:05 pm
by tom000
RedHand wrote:A dodaj do startu kernelka taką opcję:
Ja mam Aspire 5024 i musiałem takie coś dodać], że by móc odczytać stan baterii.
Dzieki, to pomogło.