Gentoo Forums
Gentoo Forums
Gentoo Forums
Quick Search: in
my linux is verly slow
View unanswered posts
View posts from last 24 hours

 
Reply to topic    Gentoo Forums Forum Index Other Things Gentoo
View previous topic :: View next topic  
Author Message
amdunlock
Guru
Guru


Joined: 24 Apr 2004
Posts: 409
Location: Darmstadt Germany

PostPosted: Fri May 14, 2004 5:26 pm    Post subject: my linux is verly slow Reply with quote

hi my gentoo box, is very slow. (xp3200+ 512mbram 7200rpm hdd) .
i installed gentoo linke it was described in the gentoo install tutorial.
later i added some packages. now i have a computer with gentoo and one with suse 9.1 .
the suse 9.1 box which has the same hware is double so fast as the gentoo box. what i have made wrong ?
here my ps ax output :

Code:

bash-2.05b$ ps ax
  PID TTY      STAT   TIME COMMAND
    1 ?        S      0:03 init [3]
    2 ?        SWN    0:00 [ksoftirqd/0]
    3 ?        SW<    0:00 [events/0]
    4 ?        SW<    0:00 [kblockd/0]
    6 ?        SW     0:00 [pdflush]
    5 ?        SW     0:00 [khubd]
    7 ?        SW     0:00 [pdflush]
    9 ?        SW<    0:00 [aio/0]
    8 ?        SW     0:00 [kswapd0]
   10 ?        SW     0:00 [kseriod]
   11 ?        SW     0:00 [khpsbpkt]
   12 ?        SW     0:00 [knodemgrd_0]
   13 ?        SW     0:00 [kjournald]
  128 ?        S      0:00 /sbin/devfsd /dev
 2625 ?        SW     0:00 [kjournald]
 3292 ?        S      0:00 /usr/sbin/syslog-ng
 3540 ?        S      0:00 /sbin/portmap
 3546 ?        SW     0:00 [rpciod]
 3547 ?        SW     0:00 [lockd]
 3589 ?        S      0:00 /usr/sbin/smbd
 3591 ?        S      0:00 /usr/sbin/nmbd
 3623 ?        S      0:00 /usr/sbin/cron
 3795 ?        S      0:00 /usr/X11R6/bin/xfs -daemon -config /etc/X11/fs/config
 3868 tty2     S      0:00 /sbin/agetty 38400 tty2 linux
 3869 tty3     S      0:00 /sbin/agetty 38400 tty3 linux
 3870 tty4     S      0:00 /sbin/agetty 38400 tty4 linux
 3871 tty5     S      0:00 /sbin/agetty 38400 tty5 linux
 3872 tty6     S      0:00 /sbin/agetty 38400 tty6 linux
 3889 ?        S      0:00 /usr/kde/3.2/bin/kdm
 3892 ?        SL     0:47 /usr/X11R6/bin/X -nolisten tcp vt7 -auth /var/run/xau
 3893 ?        S      0:00 -:0
 3983 ?        S      0:00 /bin/sh /etc/X11/Sessions/kde-3.2.2
 3989 ?        S      0:00 /bin/sh --login /usr/kde/3.2/bin/startkde
 4014 ?        S      0:00 kdeinit: Running...
 4017 ?        S      0:00 kdeinit: dcopserver --nosid
 4019 ?        S      0:00 kdeinit: klauncher
 4022 ?        S      0:00 kdeinit: kded
 4029 ?        S      0:00 kdeinit: kxkb
 4060 ?        S      0:00 //usr/kde/3.2/bin/artsd -F 10 -S 4096 -a alsa -s 60 -
 4062 ?        S      0:00 kdeinit: knotify
 4066 ?        S      0:00 kwrapper ksmserver
 4068 ?        S      0:00 kdeinit: ksmserver
 4069 ?        S      0:00 kdeinit: kwin -session 1051d4cadf00010817385580000004
 4071 ?        S      0:01 kdeinit: kdesktop
 4073 ?        S      0:03 kdeinit: kicker
 4074 ?        S      0:00 kdeinit: kio_file file /tmp/ksocket-saftsack/klaunche
 4076 ?        S      0:00 kdeinit: klipper
 4077 ?        S      0:03 superkaramba -session 1060fa2b7f000108274163200000205
 4078 ?        S      0:03 superkaramba -session 1060fa2b7f000108274166100000205
 4080 ?        S      0:00 kdeinit: kmix -session 1040f321a900010837643170000004
 4081 ?        S      0:00 /usr/bin/xmms --sm-client-id 10447f974900010729371580
 4102 ?        S      0:00 /usr/bin/xmms --sm-client-id 10447f974900010729371580
 4103 ?        S      0:00 /usr/bin/xmms --sm-client-id 10447f974900010729371580
 4104 ?        S      0:00 licq -p kde-gui -- -session 107868cbe6000107297081300
 4107 ?        S      0:00 /usr/bin/xmms --sm-client-id 10447f974900010729371580
 4109 ?        S      0:00 licq -p kde-gui -- -session 107868cbe6000107297081300
 4110 ?        S      0:00 licq -p kde-gui -- -session 107868cbe6000107297081300
 4111 ?        S      0:00 licq -p kde-gui -- -session 107868cbe6000107297081300
 4112 ?        S      0:00 licq -p kde-gui -- -session 107868cbe6000107297081300
18647 ?        S      0:00 kdeinit: konqueror --silent
18653 ?        S      0:00 kdeinit: konsole
18655 pts/0    S      0:00 /bin/bash
18723 ?        S      0:00 login -- root
18737 tty1     S      0:00 -bash
18757 ?        S      0:09 /usr/lib/mozilla/mozilla-bin
18784 ?        S      0:00 /usr/lib/mozilla/mozilla-bin
18785 ?        S      0:00 /usr/lib/mozilla/mozilla-bin
18787 ?        S      0:00 /usr/libexec/gconfd-2 20
18788 ?        S      0:00 /usr/lib/mozilla/mozilla-bin
18793 ?        S      0:00 /usr/bin/esd -terminate -nobeeps -as 2 -spawnfd 30
19386 ?        S      0:00 /usr/lib/mozilla/mozilla-bin
19387 ?        S      0:00 /usr/lib/mozilla/mozilla-bin
19388 ?        S      0:00 /usr/lib/mozilla/mozilla-bin
19389 ?        S      0:00 /usr/lib/mozilla/mozilla-bin
19390 ?        S      0:00 kdeinit: konsole
19393 pts/1    S      0:00 /bin/bash
19396 pts/1    R      0:00 ps ax

_________________
-2500+ @ 3200+ ---- 512MB-Ram watercooled Htf X Triple @ 3 x 5V - Abit AN7 s*cking microguru - Geforce 6800 - Audigy 2 -=Gentoo Stage 2004.2 @ ext3=-
Back to top
View user's profile Send private message
rusty
Apprentice
Apprentice


Joined: 07 May 2004
Posts: 181
Location: St.Louis

PostPosted: Fri May 14, 2004 5:55 pm    Post subject: Reply with quote

Try runnig famd. It helps Gnome and KDE to access filesystem faster.
Code:
emerge -av fam
/etc/init.d/famd start
rc-update add famd default
Back to top
View user's profile Send private message
amdunlock
Guru
Guru


Joined: 24 Apr 2004
Posts: 409
Location: Darmstadt Germany

PostPosted: Fri May 14, 2004 6:50 pm    Post subject: Reply with quote

oh thanks. that helped a lot. but it is not as fast as this new suse sys.
what else could be false ?
_________________
-2500+ @ 3200+ ---- 512MB-Ram watercooled Htf X Triple @ 3 x 5V - Abit AN7 s*cking microguru - Geforce 6800 - Audigy 2 -=Gentoo Stage 2004.2 @ ext3=-
Back to top
View user's profile Send private message
greml!n
Apprentice
Apprentice


Joined: 29 Mar 2003
Posts: 159

PostPosted: Fri May 14, 2004 6:54 pm    Post subject: Reply with quote

amdunlock wrote:
oh thanks. that helped a lot. but it is not as fast as this new suse sys.
what else could be false ?


Can you define how it is slow?
Back to top
View user's profile Send private message
amdunlock
Guru
Guru


Joined: 24 Apr 2004
Posts: 409
Location: Darmstadt Germany

PostPosted: Fri May 14, 2004 7:01 pm    Post subject: Reply with quote

yes. if i open konqueror it takes a while, until it is started. (1.5seconds)
on this suse box it is started, after 0.3 seconds.
the suse is a fresh installed sys and my gentoo is a little bigger, but that's a little bit long i think. are there benchmarks for testing linux systems for speed ? thanks a lot :D

here my hdparm config : hdparm -d 1 -X udma4/2 (i tested both)
_________________
-2500+ @ 3200+ ---- 512MB-Ram watercooled Htf X Triple @ 3 x 5V - Abit AN7 s*cking microguru - Geforce 6800 - Audigy 2 -=Gentoo Stage 2004.2 @ ext3=-
Back to top
View user's profile Send private message
teknomage1
Veteran
Veteran


Joined: 05 Aug 2003
Posts: 1239
Location: Los Angeles, CA

PostPosted: Fri May 14, 2004 7:15 pm    Post subject: Reply with quote

you could try following the Gentoo Prelink Guide It can really spped up load times for big applications.
Back to top
View user's profile Send private message
amdunlock
Guru
Guru


Joined: 24 Apr 2004
Posts: 409
Location: Darmstadt Germany

PostPosted: Fri May 14, 2004 7:18 pm    Post subject: Reply with quote

thanks for the link. i wil try that :D
_________________
-2500+ @ 3200+ ---- 512MB-Ram watercooled Htf X Triple @ 3 x 5V - Abit AN7 s*cking microguru - Geforce 6800 - Audigy 2 -=Gentoo Stage 2004.2 @ ext3=-
Back to top
View user's profile Send private message
NeddySeagoon
Administrator
Administrator


Joined: 05 Jul 2003
Posts: 37993
Location: 56N 3W

PostPosted: Fri May 14, 2004 7:22 pm    Post subject: Reply with quote

amdunlock,

Have you enabled DMA in the kernel?
What does hdparam /dev/hdX and hdparam -i /dev/hdX say. X is the drive you want to look at.

The * appears next to the data transfer mode in use.
PIO modes are slow and CPU intensive, DMA is faster and frees the CPU for other things.
_________________
Regards,

NeddySeagoon

Computer users fall into two groups:-
those that do backups
those that have never had a hard drive fail.
Back to top
View user's profile Send private message
amdunlock
Guru
Guru


Joined: 24 Apr 2004
Posts: 409
Location: Darmstadt Germany

PostPosted: Fri May 14, 2004 7:31 pm    Post subject: Reply with quote

i have dma ^^

output from hdparm:

bash-2.05b# hdparm /dev/hda

/dev/hda:
multcount = 16 (on)
IO_support = 1 (32-bit)
unmaskirq = 1 (on)
using_dma = 1 (on)
keepsettings = 0 (off)
readonly = 0 (off)
readahead = 256 (on)
geometry = 16383/255/63, sectors = 156301488, start = 0

thanks a lot :D
_________________
-2500+ @ 3200+ ---- 512MB-Ram watercooled Htf X Triple @ 3 x 5V - Abit AN7 s*cking microguru - Geforce 6800 - Audigy 2 -=Gentoo Stage 2004.2 @ ext3=-
Back to top
View user's profile Send private message
NeddySeagoon
Administrator
Administrator


Joined: 05 Jul 2003
Posts: 37993
Location: 56N 3W

PostPosted: Fri May 14, 2004 7:41 pm    Post subject: Reply with quote

amdunlock,

Check your read rates /sbin/hdparam -tT /dev/hda.
Compare with your other PC.
_________________
Regards,

NeddySeagoon

Computer users fall into two groups:-
those that do backups
those that have never had a hard drive fail.
Back to top
View user's profile Send private message
searcher
Apprentice
Apprentice


Joined: 13 Mar 2003
Posts: 175
Location: NL

PostPosted: Fri May 14, 2004 11:31 pm    Post subject: Reply with quote

amdunlock wrote:
yes. if i open konqueror it takes a while, until it is started. (1.5seconds)

There's an option in KDE for preloading konqueror on KDE startup. This could account for konq starting faster on Suse. However, i had the same problem. My gentoo installation is much slower then my slackware, which puzzles me somewhat. I'm beginning to think it may have something to do with my optimization settings and use-flags, but i don't think i will ever find out.
Make sure your kernel has all the right stuff in it. and try to find a nice patchset. I'm using the love-sources right now, which really make your kernel rock like ninja! 8)

Good luck with tracking it down,
~searcher
Back to top
View user's profile Send private message
deadaim
Guru
Guru


Joined: 27 Oct 2003
Posts: 467
Location: Florida

PostPosted: Sat May 15, 2004 12:31 am    Post subject: Reply with quote

What are your CFLAGS? (They are listed in /etc/make.conf)
Back to top
View user's profile Send private message
greml!n
Apprentice
Apprentice


Joined: 29 Mar 2003
Posts: 159

PostPosted: Sat May 15, 2004 2:25 pm    Post subject: Reply with quote

amdunlock wrote:
yes. if i open konqueror it takes a while, until it is started. (1.5seconds)
on this suse box it is started, after 0.3 seconds.
the suse is a fresh installed sys and my gentoo is a little bigger, but that's a little bit long i think. are there benchmarks for testing linux systems for speed ? thanks a lot :D

here my hdparm config : hdparm -d 1 -X udma4/2 (i tested both)


What is your RAM situation and what kernel are you running? Using 2.6.6, I felt a large increase in "interactice" performance by lowering /proc/sys/vm/swappiness from 60 to 30. This is because the kernel is now less likely to swap stuff to disk, which improves the responsiveness.
Back to top
View user's profile Send private message
Steve03
n00b
n00b


Joined: 03 Sep 2003
Posts: 54

PostPosted: Sat May 15, 2004 3:10 pm    Post subject: Reply with quote

maybe its a problem with ur
/etc/hosts

i also had the problem and it was because of it
Back to top
View user's profile Send private message
amdunlock
Guru
Guru


Joined: 24 Apr 2004
Posts: 409
Location: Darmstadt Germany

PostPosted: Sun May 16, 2004 4:07 pm    Post subject: Reply with quote

make.conf

Code:

# These settings were set by the catalyst build script that automatically built$
CFLAGS="-march=athlon-xp -O2 -pipe -fomit-frame-pointer"
CHOST="i686-pc-linux-gnu"
USE="mmx 3dnow qt kde alsa -gnome -gtk -oss"
CXXFLAGS="${CFLAGS}"
MAKEOPTS="-j2"




dmesg:

Code:

Linux version 2.6.5-gentoo (root@linux) (gcc version 3.3.2 20031218 (Gentoo Linux 3.3.2-r5, propolice-3.3-7)) #5 Wed May 5 16:49:18 UTC 2004
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
 BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
 BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 000000001fff0000 (usable)
 BIOS-e820: 000000001fff0000 - 000000001fff3000 (ACPI NVS)
 BIOS-e820: 000000001fff3000 - 0000000020000000 (ACPI data)
 BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
 BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
 BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
511MB LOWMEM available.
On node 0 totalpages: 131056
  DMA zone: 4096 pages, LIFO batch:1
  Normal zone: 126960 pages, LIFO batch:16
  HighMem zone: 0 pages, LIFO batch:1
DMI 2.2 present.
ACPI: RSDP (v000 Nvidia                                    ) @ 0x000f7450
ACPI: RSDT (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x1fff3000
ACPI: FADT (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x1fff3040
ACPI: DSDT (v001 NVIDIA AWRDACPI 0x00001000 MSFT 0x0100000e) @ 0x00000000
Built 1 zonelists
Kernel command line: root=/dev/hda7 video=vesafb:ywrap,mtrr vga=794 splash=silent ide2=noprobe ide3=noprobe
bootsplash: silent mode.
ide_setup: ide2=noprobe
ide_setup: ide3=noprobe
Initializing CPU#0
PID hash table entries: 2048 (order 11: 16384 bytes)
Detected 2194.485 MHz processor.
Using tsc for high-res timesource
Console: colour dummy device 80x25
Memory: 513572k/524224k available (2932k kernel code, 9904k reserved, 1031k data, 180k init, 0k highmem)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay loop... 4341.76 BogoMIPS
Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
checking if image is initramfs...it isn't (ungzip failed); looks like an initrd
Freeing initrd memory: 335k freed
CPU:     After generic identify, caps: 0383fbff c1c3fbff 00000000 00000000
CPU:     After vendor identify, caps: 0383fbff c1c3fbff 00000000 00000000
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 512K (64 bytes/line)
CPU:     After all inits, caps: 0383fbff c1c3fbff 00000000 00000020
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU: AMD Athlon(tm) XP 3200+ stepping 00
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
NET: Registered protocol family 16
PCI: PCI BIOS revision 2.10 entry at 0xfbc60, last bus=2
PCI: Using configuration type 1
mtrr: v2.0 (20020519)
ACPI: Subsystem revision 20040326
ACPI: IRQ9 SCI: Edge set to Level Trigger.
ACPI: Interpreter enabled
ACPI: Using PIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (00:00)
PCI: Probing PCI hardware (bus 00)
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGPB._PRT]
ACPI: PCI Interrupt Link [LNK1] (IRQs *3 4 5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNK2] (IRQs 3 4 5 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNK3] (IRQs 3 4 5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNK4] (IRQs 3 4 *5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNK5] (IRQs 3 4 5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LUBA] (IRQs 3 4 *5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LUBB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LMAC] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LAPU] (IRQs 3 4 5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LACI] (IRQs 3 4 5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LMCI] (IRQs 3 4 5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LSMB] (IRQs *3 4 5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LUB2] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LFIR] (IRQs 3 4 5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [L3CM] (IRQs 3 4 5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LIDE] (IRQs 3 4 5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [APC1] (IRQs *16)
ACPI: PCI Interrupt Link [APC2] (IRQs *17)
ACPI: PCI Interrupt Link [APC3] (IRQs 18)
ACPI: PCI Interrupt Link [APC4] (IRQs *19)
ACPI: PCI Interrupt Link [APC5] (IRQs 16)
ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22)
ACPI: PCI Interrupt Link [APCG] (IRQs 20 21 22)
ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22)
ACPI: PCI Interrupt Link [APCI] (IRQs 20 21 22)
ACPI: PCI Interrupt Link [APCJ] (IRQs 20 21 22)
ACPI: PCI Interrupt Link [APCK] (IRQs 20 21 22)
ACPI: PCI Interrupt Link [APCS] (IRQs *23)
ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22)
ACPI: PCI Interrupt Link [APCM] (IRQs 20 21 22)
ACPI: PCI Interrupt Link [AP3C] (IRQs 20 21 22)
ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22)
Linux Plug and Play Support v0.97 (c) Adam Belay
SCSI subsystem initialized
drivers/usb/core/usb.c: registered new driver usbfs
drivers/usb/core/usb.c: registered new driver hub
ACPI: PCI Interrupt Link [LSMB] enabled at IRQ 3
ACPI: PCI Interrupt Link [LUBA] enabled at IRQ 5
ACPI: PCI Interrupt Link [LUBB] enabled at IRQ 10
ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 11
ACPI: PCI Interrupt Link [LMAC] enabled at IRQ 11
ACPI: PCI Interrupt Link [LNK1] enabled at IRQ 3
ACPI: PCI Interrupt Link [LNK2] enabled at IRQ 10
ACPI: PCI Interrupt Link [LNK4] enabled at IRQ 5
PCI: Using ACPI for IRQ routing
PCI: if you experience problems, try using option 'pci=noacpi' or even 'acpi=off'
vesafb: framebuffer at 0xd0000000, mapped to 0xe0808000, size 16384k
vesafb: mode is 1280x1024x16, linelength=2560, pages=1
vesafb: protected mode interface info at c000:ede0
vesafb: pmi: set display start = c00cee25, set palette = c00ceeaa
vesafb: pmi: ports = b4c3 b503 ba03 c003 c103 c403 c503 c603 c703 c803 c903 cc03 ce03 cf03 d003 d103 d203 d303 d403 d503 da03 ff03
vesafb: scrolling: ywrap using protected mode interface, yres_virtual=6553
vesafb: directcolor: size=0:5:6:5, shift=0:11:5:0
fb0: VESA VGA frame buffer device
Machine check exception polling timer started.
InterMezzo Kernel/Intersync communications $Revision: 1.4 $ info@clusterfs.com
devfs: 2004-01-31 Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x1
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
NTFS driver 2.1.6 [Flags: R/W].
udf: registering filesystem
Initializing Cryptographic API
ACPI: Power Button (FF) [PWRF]
ACPI: Processor [CPU0] (supports C1)
ACPI: Thermal Zone [THRM] (20 C)
mice: PS/2 mouse device common for all mice
logibm.c: Didn't find Logitech busmouse at 0x23c
serio: i8042 AUX port at 0x60,0x64 irq 12
input: ImExPS/2 Logitech Explorer Mouse on isa0060/serio1
serio: i8042 KBD port at 0x60,0x64 irq 1
input: AT Translated Set 2 keyboard on isa0060/serio0
bootsplash 3.1.4-2004/02/19: looking for picture.... silentjpeg size 310809 bytes, found (1280x1024, 32818 bytes, v3).
Console: switching to colour frame buffer device 148x51
lp: driver loaded but no devices found
ppdev: user-space parallel port driver
Linux agpgart interface v0.100 (c) Dave Jones
agpgart: Detected NVIDIA nForce2 chipset
agpgart: Maximum main memory to use for agp memory: 439M
agpgart: AGP aperture is 64M @ 0xe0000000
Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing disabled
ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
parport0: PC-style at 0x378 (0x778) [PCSPP(,...)]
parport0: irq 7 detected
lp0: using parport0 (polling).
Using anticipatory io scheduler
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
loop: loaded (max 8 devices)
nbd: registered device at major 43
forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.25.
PCI: Setting latency timer of device 0000:00:04.0 to 64
eth0: forcedeth.c: subsystem: 0147b:1c06 bound to 0000:00:04.0
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
NFORCE2: IDE controller at PCI slot 0000:00:09.0
NFORCE2: chipset revision 162
NFORCE2: not 100% native mode: will probe irqs later
NFORCE2: BIOS didn't set cable bits correctly. Enabling workaround.
NFORCE2: 0000:00:09.0 (rev a2) UDMA133 controller
    ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:DMA, hdb:DMA
    ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:DMA, hdd:DMA
hda: ST380011A, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
hdc: R/RW 12x8x32, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
hda: max request size: 1024KiB
hda: 156301488 sectors (80026 MB) w/2048KiB Cache, CHS=16383/255/63, UDMA(100)
 /dev/ide/host0/bus0/target0/lun0: p1 p2 < p5 p6 p7 >
hdc: ATAPI 32X CD-ROM CD-R/RW drive, 4096kB Cache, DMA
Uniform CD-ROM driver Revision: 3.20
libata version 1.02 loaded.
ohci1394: $Rev: 1172 $ Ben Collins <bcollins@debian.org>
ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[10]  MMIO=[e7005000-e70057ff]  Max Packet=[2048]
ieee1394: raw1394: /dev/raw1394 device initialized
ehci_hcd 0000:00:02.2: nVidia Corporation nForce2 USB Controller
PCI: Setting latency timer of device 0000:00:02.2 to 64
ehci_hcd 0000:00:02.2: irq 11, pci mem e1849000
ehci_hcd 0000:00:02.2: new USB bus registered, assigned bus number 1
PCI: cache line size of 64 is not supported by device 0000:00:02.2
ehci_hcd 0000:00:02.2: USB 2.0 enabled, EHCI 1.00, driver 2003-Dec-29
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 6 ports detected
USB Universal Host Controller Interface driver v2.2
drivers/usb/core/usb.c: registered new driver usblp
drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver
Initializing USB Mass Storage driver...
drivers/usb/core/usb.c: registered new driver usb-storage
USB Mass Storage support registered.
drivers/usb/core/usb.c: registered new driver hid
drivers/usb/input/hid-core.c: v2.0:USB HID core driver
md: linear personality registered as nr 1
md: raid0 personality registered as nr 2
md: raid1 personality registered as nr 3
md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
oprofile: using timer interrupt.
NET: Registered protocol family 2
IP: routing cache hash table of 4096 buckets, 32Kbytes
TCP: Hash tables configured (established 32768 bind 65536)
ip_conntrack version 2.1 (4095 buckets, 32760 max) - 296 bytes per conntrack
ip_tables: (C) 2000-2002 Netfilter core team
ipt_recent v0.3.1: Stephen Frost <sfrost@snowman.net>.  http://snowman.net/projects/ipt_recent/
arp_tables: (C) 2002 David S. Miller
NET: Registered protocol family 1
NET: Registered protocol family 17
ACPI: (supports S0 S1 S4 S5)
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
RAMDISK: Couldn't find valid RAM disk image starting at 0.
kjournald starting.  Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
VFS: Mounted root (ext3 filesystem) readonly.
Mounted devfs on /dev
Freeing unused kernel memory: 180k freed
ieee1394: Host added: ID:BUS[0-00:1023]  GUID[00023c0091071877]
Adding 1036120k swap on /dev/hda6.  Priority:-1 extents:1
EXT3 FS on hda7, internal journal
nvidia: no version magic, tainting kernel.
nvidia: module license 'NVIDIA' taints kernel.
0: nvidia: loading NVIDIA Linux x86 nvidia.o Kernel Module  1.0-4496  Wed Jul 16 19:03:09 PDT 2003
kjournald starting.  Commit interval 5 seconds
EXT3 FS on hda5, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
(filter_get_filter_fs,l. 230): ops at c051c278
(fs/intermezzo/super.c:presto_get_sb,l. 258 2613): InterMezzo: cache mount failure.
(filter_get_filter_fs,l. 230): ops at c051c278
(fs/intermezzo/super.c:presto_get_sb,l. 258 2613): InterMezzo: cache mount failure.
i2c_adapter i2c-0: nForce2 SMBus adapter at 0x5000
i2c_adapter i2c-1: nForce2 SMBus adapter at 0x5100
nfs warning: mount version older than kernel
bootsplash 3.1.4-2004/02/19: looking for picture.... found (1280x1024, 32818 bytes, v3).
bootsplash: status on console 0 changed to on
bootsplash 3.1.4-2004/02/19: looking for picture.... found (1280x1024, 32818 bytes, v3).
bootsplash: status on console 1 changed to on
bootsplash 3.1.4-2004/02/19: looking for picture.... found (1280x1024, 32818 bytes, v3).
bootsplash: status on console 2 changed to on
bootsplash 3.1.4-2004/02/19: looking for picture.... found (1280x1024, 32818 bytes, v3).
bootsplash: status on console 3 changed to on
bootsplash 3.1.4-2004/02/19: looking for picture.... found (1280x1024, 32818 bytes, v3).
bootsplash: status on console 4 changed to on
bootsplash 3.1.4-2004/02/19: looking for picture.... found (1280x1024, 32818 bytes, v3).
bootsplash: status on console 5 changed to on
Debug: sleeping function called from invalid context at mm/slab.c:1931
in_atomic():1, irqs_disabled():0
Call Trace:
 [<c011b4db>] __might_sleep+0xab/0xd0
 [<c013f66c>] kmem_cache_alloc+0x6c/0x70
 [<c014e1f4>] __get_vm_area+0x24/0x100
 [<c014e302>] get_vm_area+0x32/0x40
 [<c01187ec>] __ioremap+0xbc/0x110
 [<c013bdbd>] buffered_rmqueue+0xed/0x1c0
 [<c011886b>] ioremap_nocache+0x2b/0xb0
 [<e1f3745b>] os_map_kernel_space+0x68/0x6c [nvidia]
 [<e1f49a57>] __nvsym00568+0x1f/0x2c [nvidia]
 [<e1f4bb76>] __nvsym00775+0x6e/0xe0 [nvidia]
 [<e1f4bc06>] __nvsym00781+0x1e/0x190 [nvidia]
 [<c015d583>] cdev_get+0x53/0xb0
 [<e1f4d68c>] rm_init_adapter+0xc/0x10 [nvidia]
 [<e1f33ed7>] nv_kern_open+0xf3/0x228 [nvidia]
 [<c015d450>] exact_match+0x0/0x10
 [<e1f33de4>] nv_kern_open+0x0/0x228 [nvidia]
 [<c015d256>] chrdev_open+0xe6/0x210
 [<c0152f52>] dentry_open+0x142/0x210
 [<c0152e02>] filp_open+0x62/0x70
 [<c015329b>] sys_open+0x5b/0x90
 [<c010941b>] syscall_call+0x7/0xb

Debug: sleeping function called from invalid context at mm/slab.c:1931
in_atomic():1, irqs_disabled():0
Call Trace:
 [<c011b4db>] __might_sleep+0xab/0xd0
 [<c013f66c>] kmem_cache_alloc+0x6c/0x70
 [<c014e1f4>] __get_vm_area+0x24/0x100
 [<c014e302>] get_vm_area+0x32/0x40
 [<c01187ec>] __ioremap+0xbc/0x110
 [<c013bdbd>] buffered_rmqueue+0xed/0x1c0
 [<c011886b>] ioremap_nocache+0x2b/0xb0
 [<e1f3745b>] os_map_kernel_space+0x68/0x6c [nvidia]
 [<e1f49a57>] __nvsym00568+0x1f/0x2c [nvidia]
 [<e1f4bb76>] __nvsym00775+0x6e/0xe0 [nvidia]
 [<e1f4bc06>] __nvsym00781+0x1e/0x190 [nvidia]
 [<e1f4d68c>] rm_init_adapter+0xc/0x10 [nvidia]
 [<e1f33ed7>] nv_kern_open+0xf3/0x228 [nvidia]
 [<e1f33de4>] nv_kern_open+0x0/0x228 [nvidia]
 [<c015d256>] chrdev_open+0xe6/0x210
 [<c0152f52>] dentry_open+0x142/0x210
 [<c0152e02>] filp_open+0x62/0x70
 [<c015329b>] sys_open+0x5b/0x90
 [<c010941b>] syscall_call+0x7/0xb

agpgart: Found an AGP 2.0 compliant device at 0000:00:00.0.
agpgart: Putting AGP V2 device at 0000:00:00.0 into 4x mode
agpgart: Putting AGP V2 device at 0000:02:00.0 into 4x mode




Code:


127.0.0.1       localhost
# IPV6 versions of localhost and co
::1 ip6-localhost ip6-loopback
fe00::0 ip6-localnet
ff00::0 ip6-mcastprefix
ff02::1 ip6-allnodes
ff02::2 ip6-allrouters
ff02::3 ip6-allhosts
domain



thanks for the help. how can i benchmark my sys ?[/code]
_________________
-2500+ @ 3200+ ---- 512MB-Ram watercooled Htf X Triple @ 3 x 5V - Abit AN7 s*cking microguru - Geforce 6800 - Audigy 2 -=Gentoo Stage 2004.2 @ ext3=-
Back to top
View user's profile Send private message
BlackEdder
Advocate
Advocate


Joined: 26 Apr 2004
Posts: 2588
Location: Dutch enclave in Egham, UK

PostPosted: Sun May 16, 2004 4:16 pm    Post subject: Reply with quote

you need to put your computer name in /etc/hosts
127.0.0.1 localhost yourcomputername

That should speed kde/konquerer up a lot
Back to top
View user's profile Send private message
amdunlock
Guru
Guru


Joined: 24 Apr 2004
Posts: 409
Location: Darmstadt Germany

PostPosted: Mon May 17, 2004 11:25 am    Post subject: Reply with quote

hi i did this, but i feel, that my computer is slower now :(
are there nooooo benchmarks ?

thanks a lot olli
_________________
-2500+ @ 3200+ ---- 512MB-Ram watercooled Htf X Triple @ 3 x 5V - Abit AN7 s*cking microguru - Geforce 6800 - Audigy 2 -=Gentoo Stage 2004.2 @ ext3=-
Back to top
View user's profile Send private message
BlackEdder
Advocate
Advocate


Joined: 26 Apr 2004
Posts: 2588
Location: Dutch enclave in Egham, UK

PostPosted: Mon May 17, 2004 11:39 am    Post subject: Reply with quote

What is content of your /etc/hosts exactly?
Is the slowness only in kde or also in other window manager/non-kde apps?
Back to top
View user's profile Send private message
Display posts from previous:   
Reply to topic    Gentoo Forums Forum Index Other Things Gentoo All times are GMT
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum