| View previous topic :: View next topic |
| Author |
Message |
cmack
n00b
Joined: 02 Sep 2003
Posts: 56
Location: Vancouver, Canada
|
 Posted: Thu Feb 19, 2004 5:34 am Post subject: XFree86 -configure delivers an unusable config |
 |
|
Ok - I finally got gpm running so I can copy/paste to my hearts content.
I have just installed gentoo for the second time on this hardware, so I know X works with it.
When I do followed by | Code: | | XFree86 -xf86config /root/XFree86Config.new |
I get: (less /var/log/XFree86.0.log) | Code: |
This is a pre-release version of XFree86, and is not supported in any
way. Bugs may be reported to XFree86@XFree86.Org and patches submitted
to fixes@XFree86.Org. Before reporting bugs in pre-release versions,
please check the latest version in the XFree86 CVS repository
(http://www.XFree86.Org/cvs).
XFree86 Version 4.3.0.1
Release Date: 15 August 2003
X Protocol Version 11, Revision 0, Release 6.6
Build Operating System: Linux 2.4.23-ck1 i686 [ELF]
Build Date: 15 February 2004
Before reporting problems, check http://www.XFree86.Org/
to make sure that you have the latest version.
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/XFree86.0.log", Time: Wed Feb 18 12:56:01 2004
(++) Using config file: "/root/XF86Config.new"
(==) ServerLayout "XFree86 Configured"
(**) |-->Screen "Screen0" (0)
(**) | |-->Monitor "Monitor0"
(**) | |-->Device "Card0"
(**) |-->Input Device "Mouse0"
(**) |-->Input Device "Keyboard0"
(==) Keyboard: CustomKeycode disabled
(**) FontPath set to "/usr/X11R6/lib/X11/fonts/misc/,/usr/X11R6/lib/X11/fonts/Speedo/,/usr/X11R6/lib/X11/fonts/Type1/,/usr/X11R6/lib/X11/fonts/CID/,/usr/X11R6/lib/X11/fonts/75dpi/,/usr/X11R6/lib/X11/fonts/100dpi/"
(**) RgbPath set to "/usr/X11R6/lib/X11/rgb"
(**) ModulePath set to "/usr/X11R6/lib/modules"
Using vt 7
(--) using VT number 7
(WW) Open APM failed (/dev/apm_bios) (No such file or directory)
(II) Module ABI versions:
XFree86 ANSI C Emulation: 0.2
XFree86 Video Driver: 0.6
XFree86 XInput driver : 0.4
XFree86 Server Extension : 0.2
XFree86 Font Renderer : 0.4
(II) Loader running on linux
(II) LoadModule: "bitmap"
(II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a
(II) Module bitmap: vendor="The XFree86 Project"
compiled for 4.3.0.1, module version = 1.0.0
Module class: XFree86 Font Renderer
ABI class: XFree86 Font Renderer, version 0.4
(II) Loading font Bitmap
(II) LoadModule: "pcidata"
(II) Loading /usr/X11R6/lib/modules/libpcidata.a
(II) Module pcidata: vendor="The XFree86 Project"
compiled for 4.3.0.1, module version = 1.0.0
ABI class: XFree86 Video Driver, version 0.6
(II) PCI: Probing config type using method 1
(II) PCI: Config type is 1
(II) PCI: stages = 0x03, oldVal1 = 0x00000000, mode1Res1 = 0x80000000
(II) PCI: PCI scan (all values are in hex)
(II) PCI: 00:00:0: chip 8086,7190 card 0000,0000 rev 02 class 06,00,00 hdr 00
(II) PCI: 00:01:0: chip 8086,7191 card 0000,0000 rev 02 class 06,04,00 hdr 01
(II) PCI: 00:03:0: chip 100b,0020 card 1385,f311 rev 00 class 02,00,00 hdr 00
(II) PCI: 00:04:0: chip 1102,0004 card 1102,0051 rev 03 class 04,01,00 hdr 80
(II) PCI: 00:04:1: chip 1102,7003 card 1102,0040 rev 03 class 09,80,00 hdr 80
__(II) PCI: 00:05:0: chip 1011,0019 card 0e11,b0bb rev 41 class 02,00,00 hdr 00
(II) PCI: 00:14:0: chip 8086,7110 card 0000,0000 rev 02 class 06,01,00 hdr 80
(II) PCI: 00:14:1: chip 8086,7111 card 0000,0000 rev 01 class 01,01,80 hdr 00
(II) PCI: 00:14:2: chip 8086,7112 card 0000,0000 rev 01 class 0c,03,00 hdr 00
(II) PCI: 00:14:3: chip 8086,7113 card 0000,0000 rev 02 class 06,80,00 hdr 00
(II) PCI: 01:00:0: chip 1002,4c42 card 0e11,b0e7 rev dc class 03,00,00 hdr 00
(II) PCI: End of PCI scan
(II) Host-to-PCI bridge:
(II) Bus 0: bridge is at (0:0:0), (0,0,1), BCTRL: 0x0008 (VGA_EN is set)
(II) Bus 0 I/O range:
[0] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) Bus 0 non-prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
(II) Bus 0 prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
(II) PCI-to-PCI bridge:
(II) Bus 1: bridge is at (0:1:0), (0,1,1), BCTRL: 0x008c (VGA_EN is set)
(II) Bus 1 I/O range:
[0] -1 0 0x00001000 - 0x000010ff (0x100) IX[B]
[1] -1 0 0x00001400 - 0x000014ff (0x100) IX[B]
[2] -1 0 0x00001800 - 0x000018ff (0x100) IX[B]
[3] -1 0 0x00001c00 - 0x00001cff (0x100) IX[B]
(II) Bus 1 non-prefetchable memory range:
[0] -1 0 0x40000000 - 0x410fffff (0x1100000) MX[B]
(II) PCI-to-ISA bridge:
(II) Bus -1: bridge is at (0:20:0), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is set)
(--) PCI:*(1:0:0) ATI Technologies Inc 3D Rage LT Pro AGP-133 rev 220, Mem @ 0x40000000/24, 0x41000000/12, I/O @ 0x1000/8
(II) Addressable bus resource ranges are
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
[1] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) OS-reported resource ranges:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[6] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
(II) PCI Memory resource overlap reduced 0x44000000 from 0x47ffffff to 0x43ffffff
(II) Active PCI resource ranges:
[0] -1 0 0x41200000 - 0x412003ff (0x400) MX[B]
[1] -1 0 0x41300000 - 0x41303fff (0x4000) MX[B]
[2] -1 0 0x41400000 - 0x414007ff (0x800) MX[B]
[3] -1 0 0x41100000 - 0x41100fff (0x1000) MX[B]
[4] -1 0 0x44000000 - 0x43ffffff (0x0) MX[B]O
[5] -1 0 0x41000000 - 0x41000fff (0x1000) MX[B](B)
[6] -1 0 0x40000000 - 0x40ffffff (0x1000000) MX[B](B)
[7] -1 0 0x00002c80 - 0x00002c9f (0x20) IX[B]
[8] -1 0 0x00002cb0 - 0x00002cbf (0x10) IX[B]
[9] -1 0 0x00002c00 - 0x00002c7f (0x80) IX[B]
[10] -1 0 0x00002420 - 0x00002427 (0x8) IX[B]
[11] -1 0 0x00002400 - 0x0000241f (0x20) IX[B]
[12] -1 0 0x00002000 - 0x000020ff (0x100) IX[B]
[13] -1 0 0x00001000 - 0x000010ff (0x100) IX[B](B)
(II) Active PCI resource ranges after removing overlaps:
[0] -1 0 0x41200000 - 0x412003ff (0x400) MX[B]
[1] -1 0 0x41300000 - 0x41303fff (0x4000) MX[B]
[2] -1 0 0x41400000 - 0x414007ff (0x800) MX[B]
[3] -1 0 0x41100000 - 0x41100fff (0x1000) MX[B]
[4] -1 0 0x44000000 - 0x43ffffff (0x0) MX[B]O
[5] -1 0 0x41000000 - 0x41000fff (0x1000) MX[B](B)
[6] -1 0 0x40000000 - 0x40ffffff (0x1000000) MX[B](B)
[7] -1 0 0x00002c80 - 0x00002c9f (0x20) IX[B]
[8] -1 0 0x00002cb0 - 0x00002cbf (0x10) IX[B]
[9] -1 0 0x00002c00 - 0x00002c7f (0x80) IX[B]
[10] -1 0 0x00002420 - 0x00002427 (0x8) IX[B]
[11] -1 0 0x00002400 - 0x0000241f (0x20) IX[B]
[12] -1 0 0x00002000 - 0x000020ff (0x100) IX[B]
[13] -1 0 0x00001000 - 0x000010ff (0x100) IX[B](B)
(II) OS-reported resource ranges after removing overlaps with PCI:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[6] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
(II) All system resource ranges:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0x41200000 - 0x412003ff (0x400) MX[B]
[6] -1 0 0x41300000 - 0x41303fff (0x4000) MX[B]
[7] -1 0 0x41400000 - 0x414007ff (0x800) MX[B]
[8] -1 0 0x41100000 - 0x41100fff (0x1000) MX[B]
[9] -1 0 0x44000000 - 0x43ffffff (0x0) MX[B]O
[10] -1 0 0x41000000 - 0x41000fff (0x1000) MX[B](B)
[11] -1 0 0x40000000 - 0x40ffffff (0x1000000) MX[B](B)
[12] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[13] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[14] -1 0 0x00002c80 - 0x00002c9f (0x20) IX[B]
[15] -1 0 0x00002cb0 - 0x00002cbf (0x10) IX[B]
[16] -1 0 0x00002c00 - 0x00002c7f (0x80) IX[B]
[17] -1 0 0x00002420 - 0x00002427 (0x8) IX[B]
[18] -1 0 0x00002400 - 0x0000241f (0x20) IX[B]
[19] -1 0 0x00002000 - 0x000020ff (0x100) IX[B]
[20] -1 0 0x00001000 - 0x000010ff (0x100) IX[B](B)
(II) LoadModule: "record"
(II) Loading /usr/X11R6/lib/modules/extensions/librecord.a
(II) Module record: vendor="The XFree86 Project"
compiled for 4.3.0.1, module version = 1.13.0
Module class: XFree86 Server Extension
ABI class: XFree86 Server Extension, version 0.2
(II) Loading extension RECORD
(II) LoadModule: "extmod"
(II) Loading /usr/X11R6/lib/modules/extensions/libextmod.a
(II) Module extmod: vendor="The XFree86 Project"
compiled for 4.3.0.1, module version = 1.0.0
Module class: XFree86 Server Extension
ABI class: XFree86 Server Extension, version 0.2
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension FontCache
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "dbe"
(II) Loading /usr/X11R6/lib/modules/extensions/libdbe.a
(II) Module dbe: vendor="The XFree86 Project"
compiled for 4.3.0.1, module version = 1.0.0
Module class: XFree86 Server Extension
ABI class: XFree86 Server Extension, version 0.2
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "dri"
(II) Loading /usr/X11R6/lib/modules/extensions/libdri.a
(II) Module dri: vendor="The XFree86 Project"
compiled for 4.3.0.1, module version = 1.0.0
ABI class: XFree86 Server Extension, version 0.2
(II) Loading sub module "drm"
(II) LoadModule: "drm"
(II) Loading /usr/X11R6/lib/modules/linux/libdrm.a
(II) Module drm: vendor="The XFree86 Project"
compiled for 4.3.0.1, module version = 1.0.0
ABI class: XFree86 Server Extension, version 0.2
(II) Loading extension XFree86-DRI
(II) LoadModule: "glx"
(II) Loading /usr/X11R6/lib/modules/extensions/libglx.a
(II) Module glx: vendor="The XFree86 Project"
compiled for 4.3.0.1, module version = 1.0.0
ABI class: XFree86 Server Extension, version 0.2
(II) Loading sub module "GLcore"
(II) LoadModule: "GLcore"
(II) Loading /usr/X11R6/lib/modules/extensions/libGLcore.a
(II) Module GLcore: vendor="The XFree86 Project"
compiled for 4.3.0.1, module version = 1.0.0
ABI class: XFree86 Server Extension, version 0.2
(II) Loading extension GLX
(II) LoadModule: "xtrap"
(II) Loading /usr/X11R6/lib/modules/extensions/libxtrap.a
(II) Module xtrap: vendor="The XFree86 Project"
compiled for 4.3.0.1, module version = 1.0.0
Module class: XFree86 Server Extension
ABI class: XFree86 Server Extension, version 0.2
(II) Loading extension DEC-XTRAP
(II) LoadModule: "type1"
(II) Loading /usr/X11R6/lib/modules/fonts/libtype1.a
(II) Module type1: vendor="The XFree86 Project"
compiled for 4.3.0.1, module version = 1.0.2
Module class: XFree86 Font Renderer
ABI class: XFree86 Font Renderer, version 0.4
(II) Loading font Type1
(II) Loading font CID
(II) LoadModule: "speedo"
(II) Loading /usr/X11R6/lib/modules/fonts/libspeedo.a
(II) Module speedo: vendor="The XFree86 Project"
compiled for 4.3.0.1, module version = 1.0.1
Module class: XFree86 Font Renderer
ABI class: XFree86 Font Renderer, version 0.4
(II) Loading font Speedo
(II) LoadModule: "ati"
(II) Loading /usr/X11R6/lib/modules/drivers/ati_drv.o
(II) Module ati: vendor="The XFree86 Project"
compiled for 4.3.0.1, module version = 6.4.18
Module class: XFree86 Video Driver
ABI class: XFree86 Video Driver, version 0.6
(II) LoadModule: "mouse"
(II) Loading /usr/X11R6/lib/modules/input/mouse_drv.o
(II) Module mouse: vendor="The XFree86 Project"
compiled for 4.3.0.1, module version = 1.0.0
Module class: XFree86 XInput Driver
ABI class: XFree86 XInput driver, version 0.4
(II) ATI: ATI driver (version 6.4.18) for chipsets: ati, ativga
(II) R128: Driver for ATI Rage 128 chipsets:
ATI Rage 128 Mobility M3 LE (PCI), ATI Rage 128 Mobility M3 LF (AGP),
ATI Rage 128 Mobility M4 MF (AGP), ATI Rage 128 Mobility M4 ML (AGP),
ATI Rage 128 Pro GL PA (AGP?), ATI Rage 128 Pro GL PB (AGP?),
ATI Rage 128 Pro GL PC (AGP?), ATI Rage 128 Pro GL PD (PCI),
ATI Rage 128 Pro GL PE (AGP?), ATI Rage 128 Pro GL PF (AGP),
ATI Rage 128 Pro VR PG (AGP?), ATI Rage 128 Pro VR PH (AGP?),
ATI Rage 128 Pro VR PI (AGP?), ATI Rage 128 Pro VR PJ (AGP?),
ATI Rage 128 Pro VR PK (AGP?), ATI Rage 128 Pro VR PL (AGP?),
ATI Rage 128 Pro VR PM (AGP?), ATI Rage 128 Pro VR PN (AGP?),
ATI Rage 128 Pro VR PO (AGP?), ATI Rage 128 Pro VR PP (PCI),
ATI Rage 128 Pro VR PQ (AGP?), ATI Rage 128 Pro VR PR (PCI),
ATI Rage 128 Pro VR PS (AGP?), ATI Rage 128 Pro VR PT (AGP?),
ATI Rage 128 Pro VR PU (AGP?), ATI Rage 128 Pro VR PV (AGP?),
ATI Rage 128 Pro VR PW (AGP?), ATI Rage 128 Pro VR PX (AGP?),
ATI Rage 128 GL RE (PCI), ATI Rage 128 GL RF (AGP),
ATI Rage 128 RG (AGP), ATI Rage 128 VR RK (PCI),
ATI Rage 128 VR RL (AGP), ATI Rage 128 4X SE (AGP?),
ATI Rage 128 4X SF (AGP?), ATI Rage 128 4X SG (AGP?),
ATI Rage 128 4X SH (AGP?), ATI Rage 128 4X SK (AGP?),
ATI Rage 128 4X SL (AGP?), ATI Rage 128 4X SM (AGP),
ATI Rage 128 4X SN (AGP?), ATI Rage 128 Pro ULTRA TF (AGP),
ATI Rage 128 Pro ULTRA TL (AGP), ATI Rage 128 Pro ULTRA TR (AGP),
ATI Rage 128 Pro ULTRA TS (AGP?), ATI Rage 128 Pro ULTRA TT (AGP?),
ATI Rage 128 Pro ULTRA TU (AGP?)
(II) RADEON: Driver for ATI Radeon chipsets: ATI Radeon QD (AGP),
ATI Radeon QE (AGP), ATI Radeon QF (AGP), ATI Radeon QG (AGP),
ATI Radeon VE/7000 QY (AGP), ATI Radeon VE/7000 QZ (AGP),
ATI Radeon Mobility M7 LW (AGP),
ATI Mobility FireGL 7800 M7 LX (AGP),
ATI Radeon Mobility M6 LY (AGP), ATI Radeon Mobility M6 LZ (AGP),
ATI Radeon IGP320 (A3) 4136, ATI Radeon IGP320M (U1) 4336,
ATI Radeon IGP330/340/350 (A4) 4137,
ATI Radeon IGP330M/340M/350M (U2) 4337,
ATI Radeon 7000 IGP (A4+) 4237, ATI Radeon Mobility 7000 IGP 4437,
ATI FireGL 8700/8800 QH (AGP), ATI Radeon 8500 QI (AGP),
ATI Radeon 8500 QJ (AGP), ATI Radeon 8500 QK (AGP),
ATI Radeon 8500 QL (AGP), ATI Radeon 9100 QM (AGP),
ATI Radeon 8500 QN (AGP), ATI Radeon 8500 QO (AGP),
ATI Radeon 8500 Qh (AGP), ATI Radeon 8500 Qi (AGP),
ATI Radeon 8500 Qj (AGP), ATI Radeon 8500 Qk (AGP),
ATI Radeon 8500 Ql (AGP), ATI Radeon 8500 BB (AGP),
ATI Radeon 7500 QW (AGP), ATI Radeon 7500 QX (AGP),
ATI Radeon 9000 Id (AGP), ATI Radeon 9000 Ie (AGP),
ATI Radeon 9000 If (AGP), ATI Radeon 9000 Ig (AGP),
ATI Radeon Mobility M9 Ld (AGP), ATI Radeon Mobility M9 Le (AGP),
ATI Radeon Mobility M9 Lf (AGP), ATI Radeon Mobility M9 Lg (AGP),
ATI Radeon 9000 IGP (A5) 5834,
ATI Radeon Mobility 9000 IGP (U3) 5835, ATI Radeon 9200 5960 (AGP),
ATI Radeon 9200 5961 (AGP), ATI Radeon 9200 5962 (AGP),
ATI Radeon 9200 5963 (AGP), ATI Radeon 9200 5964 (AGP),
ATI Radeon M9+ 5968 (AGP), ATI Radeon M9+ 5969 (AGP),
ATI Radeon M9+ 596A (AGP), ATI Radeon M9+ 596B (AGP),
ATI Radeon 9500 AD (AGP), ATI Radeon 9500 AE (AGP),
ATI Radeon 9500 AF (AGP), ATI FireGL Z1/X1 AG (AGP),
ATI Radeon 9700 Pro ND (AGP), ATI Radeon 9700/9500Pro NE (AGP),
ATI Radeon 9700 NF (AGP), ATI FireGL X1 NG (AGP),
ATI Radeon 9600 AP (AGP), ATI Radeon 9600 Pro AR (AGP),
ATI Radeon Mobility M10 NP (AGP), ATI FireGL (R350) AK (AGP),
ATI Radeon 9800 NH (AGP), ATI FireGL (R350) NK (AGP)
(II) Primary Device is: PCI 01:00:0
(II) ATI: Candidate "Device" section "Card0".
(II) ATI: Shared PCI/AGP Mach64 in slot 1:0:0 detected.
(II) ATI: Shared PCI/AGP Mach64 in slot 1:0:0 assigned to active "Device" section "Card0".
(II) resource ranges after xf86ClaimFixedResources() call:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0x41200000 - 0x412003ff (0x400) MX[B]
[6] -1 0 0x41300000 - 0x41303fff (0x4000) MX[B]
[7] -1 0 0x41400000 - 0x414007ff (0x800) MX[B]
[8] -1 0 0x41100000 - 0x41100fff (0x1000) MX[B]
[9] -1 0 0x44000000 - 0x43ffffff (0x0) MX[B]O
[10] -1 0 0x41000000 - 0x41000fff (0x1000) MX[B](B)
[11] -1 0 0x40000000 - 0x40ffffff (0x1000000) MX[B](B)
[12] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[13] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[14] -1 0 0x00002c80 - 0x00002c9f (0x20) IX[B]
[15] -1 0 0x00002cb0 - 0x00002cbf (0x10) IX[B]
[16] -1 0 0x00002c00 - 0x00002c7f (0x80) IX[B]
[17] -1 0 0x00002420 - 0x00002427 (0x8) IX[B]
[18] -1 0 0x00002400 - 0x0000241f (0x20) IX[B]
[19] -1 0 0x00002000 - 0x000020ff (0x100) IX[B]
[20] -1 0 0x00001000 - 0x000010ff (0x100) IX[B](B)
(II) Loading sub module "atimisc"
(II) LoadModule: "atimisc"
(II) Loading /usr/X11R6/lib/modules/drivers/atimisc_drv.o
(II) Module atimisc: vendor="The XFree86 Project"
compiled for 4.3.0.1, module version = 6.4.18
Module class: XFree86 Video Driver
ABI class: XFree86 Video Driver, version 0.6
(II) resource ranges after probing:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0x41200000 - 0x412003ff (0x400) MX[B]
[6] -1 0 0x41300000 - 0x41303fff (0x4000) MX[B]
[7] -1 0 0x41400000 - 0x414007ff (0x800) MX[B]
[8] -1 0 0x41100000 - 0x41100fff (0x1000) MX[B]
[9] -1 0 0x44000000 - 0x43ffffff (0x0) MX[B]O
[10] -1 0 0x41000000 - 0x41000fff (0x1000) MX[B](B)
[11] -1 0 0x40000000 - 0x40ffffff (0x1000000) MX[B](B)
[12] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B]
[13] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B]
[14] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B]
[15] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[16] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[17] -1 0 0x00002c80 - 0x00002c9f (0x20) IX[B]
[18] -1 0 0x00002cb0 - 0x00002cbf (0x10) IX[B]
[19] -1 0 0x00002c00 - 0x00002c7f (0x80) IX[B]
[20] -1 0 0x00002420 - 0x00002427 (0x8) IX[B]
[21] -1 0 0x00002400 - 0x0000241f (0x20) IX[B]
[22] -1 0 0x00002000 - 0x000020ff (0x100) IX[B]
[23] -1 0 0x00001000 - 0x000010ff (0x100) IX[B](B)
[24] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B]
[25] 0 0 0x000003c0 - 0x000003df (0x20) IS[B]
(II) Setting vga for screen 0.
(==) ATI(0): Chipset: "ati".
(==) ATI(0): Depth 8, (==) framebuffer bpp 8
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Loading /usr/X11R6/lib/modules/linux/libint10.a
(II) Module int10: vendor="The XFree86 Project"
compiled for 4.3.0.1, module version = 1.0.0
ABI class: XFree86 Video Driver, version 0.6
(WW) ATI(0): Unable to initialise int10 interface.
(--) ATI(0): ATI 3D Rage LT Pro graphics controller detected.
(--) ATI(0): Chip type 4C42 "LB", version 4, foundry UMC, class 0, revision 0x03.
(--) ATI(0): AGP bus interface detected; block I/O base is 0x1000.
(--) ATI(0): ATI Mach64 adapter detected.
(!!) ATI(0): For information on using the multimedia capabilities
of this adapter, please see http://gatos.sf.net.
(--) ATI(0): Internal RAMDAC (subtype 1) detected.
(==) ATI(0): RGB weight 888
(==) ATI(0): Default visual is PseudoColor
(==) ATI(0): Using gamma correction (1.0, 1.0, 1.0)
(II) ATI(0): Using Mach64 accelerator CRTC.
(**) ATI(0): Using CRT interface and disabling digital flat panel.
(II) ATI(0): Storing hardware cursor image at 0x403FFC00.
(II) ATI(0): Using 8 MB linear aperture at 0x40000000.
(!!) ATI(0): Virtual resolutions will be limited to 4095 kB
due to linear aperture size and/or placement of hardware cursor image area.
(II) ATI(0): Using Block 0 MMIO aperture at 0x41000400.
(II) ATI(0): Using Block 1 MMIO aperture at 0x41000000.
(==) ATI(0): Write-combining range (0x40000000,0x400000)
(II) ATI(0): MMIO write caching enabled.
(--) ATI(0): 4096 kB of SGRAM (1:1) detected (using 4095 kB).
(WW) ATI(0): Cannot shadow an accelerated frame buffer.
(II) ATI(0): Engine XCLK 48.548 MHz; Refresh rate code 7.
(--) ATI(0): Internal programmable clock generator detected.
(--) ATI(0): Reference clock 157.5/11 (14.318) MHz.
(WW) ATI(0): Monitor0: Using default hsync range of 28.00-33.00kHz
(WW) ATI(0): Monitor0: using default vrefresh range of 43.00-72.00Hz
(II) ATI(0): Maximum clock: 114.00 MHz
(II) ATI(0): Not using default mode "640x350" (hsync out of range)
(II) ATI(0): Not using default mode "320x175" (hsync out of range)
(II) ATI(0): Not using default mode "640x400" (hsync out of range)
(II) ATI(0): Not using default mode "320x200" (hsync out of range)
(II) ATI(0): Not using default mode "720x400" (hsync out of range)
(II) ATI(0): Not using default mode "360x200" (hsync out of range)
(II) ATI(0): Not using default mode "640x480" (hsync out of range)
(II) ATI(0): Not using default mode "320x240" (hsync out of range)
(II) ATI(0): Not using default mode "640x480" (hsync out of range)
(II) ATI(0): Not using default mode "320x240" (hsync out of range)
(II) ATI(0): Not using default mode "640x480" (hsync out of range)
(II) ATI(0): Not using default mode "320x240" (hsync out of range)
(II) ATI(0): Not using default mode "800x600" (hsync out of range)
(II) ATI(0): Not using default mode "400x300" (hsync out of range)
(II) ATI(0): Not using default mode "800x600" (hsync out of range)
(II) ATI(0): Not using default mode "400x300" (hsync out of range)
(II) ATI(0): Not using default mode "800x600" (hsync out of range)
(II) ATI(0): Not using default mode "400x300" (hsync out of range)
(II) ATI(0): Not using default mode "800x600" (hsync out of range)
(II) ATI(0): Not using default mode "400x300" (hsync out of range)
(II) ATI(0): Not using default mode "800x600" (hsync out of range)
(II) ATI(0): Not using default mode "400x300" (hsync out of range)
(II) ATI(0): Not using default mode "1024x768" (hsync out of range)
(II) ATI(0): Not using default mode "512x384" (hsync out of range)
(II) ATI(0): Not using default mode "1024x768" (hsync out of range)
(II) ATI(0): Not using default mode "512x384" (hsync out of range)
(II) ATI(0): Not using default mode "1024x768" (hsync out of range)
(II) ATI(0): Not using default mode "512x384" (hsync out of range)
(II) ATI(0): Not using default mode "1024x768" (hsync out of range)
(II) ATI(0): Not using default mode "512x384" (hsync out of range)
(II) ATI(0): Not using default mode "1024x768" (hsync out of range)
(II) ATI(0): Not using default mode "512x384" (hsync out of range)
(II) ATI(0): Not using default mode "1152x864" (hsync out of range)
(II) ATI(0): Not using default mode "576x432" (hsync out of range)
(II) ATI(0): Not using default mode "1280x960" (hsync out of range)
(II) ATI(0): Not using default mode "640x480" (hsync out of range)
(II) ATI(0): Not using default mode "1280x960" (bad mode clock/interlace/doublescan)
(II) ATI(0): Not using default mode "640x480" (hsync out of range)
(II) ATI(0): Not using default mode "1280x1024" (hsync out of range)
(II) ATI(0): Not using default mode "640x512" (hsync out of range)
(II) ATI(0): Not using default mode "1280x1024" (bad mode clock/interlace/doublescan)
(II) ATI(0): Not using default mode "640x512" (hsync out of range)
(II) ATI(0): Not using default mode "1280x1024" (bad mode clock/interlace/doublescan)
(II) ATI(0): Not using default mode "640x512" (hsync out of range)
(II) ATI(0): Not using default mode "1600x1200" (bad mode clock/interlace/doublescan)
(II) ATI(0): Not using default mode "800x600" (hsync out of range)
(II) ATI(0): Not using default mode "1600x1200" (bad mode clock/interlace/doublescan)
(II) ATI(0): Not using default mode "800x600" (hsync out of range)
(II) ATI(0): Not using default mode "1600x1200" (bad mode clock/interlace/doublescan)
(II) ATI(0): Not using default mode "800x600" (hsync out of range)
(II) ATI(0): Not using default mode "1600x1200" (bad mode clock/interlace/doublescan)
(II) ATI(0): Not using default mode "800x600" (hsync out of range)
(II) ATI(0): Not using default mode "1600x1200" (bad mode clock/interlace/doublescan)
(II) ATI(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan)
(II) ATI(0): Not using default mode "1792x1344" (bad mode clock/interlace/doublescan)
(II) ATI(0): Not using default mode "896x672" (hsync out of range)
(II) ATI(0): Not using default mode "1792x1344" (bad mode clock/interlace/doublescan)
(II) ATI(0): Not using default mode "896x672" (bad mode clock/interlace/doublescan)
(II) ATI(0): Not using default mode "1856x1392" (bad mode clock/interlace/doublescan)
(II) ATI(0): Not using default mode "928x696" (hsync out of range)
(II) ATI(0): Not using default mode "1856x1392" (bad mode clock/interlace/doublescan)
(II) ATI(0): Not using default mode "928x696" (bad mode clock/interlace/doublescan)
(II) ATI(0): Not using default mode "1920x1440" (bad mode clock/interlace/doublescan)
(II) ATI(0): Not using default mode "960x720" (bad mode clock/interlace/doublescan)
(II) ATI(0): Not using default mode "1920x1440" (bad mode clock/interlace/doublescan)
(II) ATI(0): Not using default mode "960x720" (bad mode clock/interlace/doublescan)
(II) ATI(0): Not using default mode "832x624" (hsync out of range)
(II) ATI(0): Not using default mode "416x312" (hsync out of range)
(II) ATI(0): Not using default mode "1152x768" (hsync out of range)
(II) ATI(0): Not using default mode "576x384" (hsync out of range)
(II) ATI(0): Not using default mode "1400x1050" (bad mode clock/interlace/doublescan)
(II) ATI(0): Not using default mode "700x525" (hsync out of range)
(II) ATI(0): Not using default mode "1400x1050" (bad mode clock/interlace/doublescan)
(II) ATI(0): Not using default mode "700x525" (hsync out of range)
(II) ATI(0): Not using default mode "1600x1024" (hsync out of range)
(II) ATI(0): Not using default mode "800x512" (hsync out of range)
(II) ATI(0): Not using default mode "1920x1440" (bad mode clock/interlace/doublescan)
(II) ATI(0): Not using default mode "960x720" (bad mode clock/interlace/doublescan)
(II) ATI(0): Not using default mode "2048x1536" (bad mode clock/interlace/doublescan)
(II) ATI(0): Not using default mode "1024x768" (bad mode clock/interlace/doublescan)
(II) ATI(0): Not using default mode "2048x1536" (bad mode clock/interlace/doublescan)
(II) ATI(0): Not using default mode "1024x768" (bad mode clock/interlace/doublescan)
(II) ATI(0): Not using default mode "2048x1536" (bad mode clock/interlace/doublescan)
(II) ATI(0): Not using default mode "1024x768" (bad mode clock/interlace/doublescan)
(--) ATI(0): Virtual size is 640x480 (pitch 640)
(**) ATI(0): *Default mode "640x480": 25.2 MHz, 31.5 kHz, 60.0 Hz
(II) ATI(0): Modeline "640x480" 25.20 640 656 752 800 480 490 492 525 -hsync -vsync
(**) ATI(0): *Default mode "320x240": 12.6 MHz, 31.5 kHz, 60.1 Hz (D)
(II) ATI(0): Modeline "320x240" 12.60 320 328 376 400 240 245 246 262 doublescan -hsync -vsync
(==) ATI(0): DPI set to (75, 75)
(II) Loading sub module "xaa"
(II) LoadModule: "xaa"
(II) Loading /usr/X11R6/lib/modules/libxaa.a
(II) Module xaa: vendor="The XFree86 Project"
compiled for 4.3.0.1, module version = 1.1.0
ABI class: XFree86 Video Driver, version 0.6
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Loading /usr/X11R6/lib/modules/libramdac.a
(II) Module ramdac: vendor="The XFree86 Project"
compiled for 4.3.0.1, module version = 0.1.0
ABI class: XFree86 Video Driver, version 0.6
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/X11R6/lib/modules/libfb.a
(II) Module fb: vendor="The XFree86 Project"
compiled for 4.3.0.1, module version = 1.0.0
ABI class: XFree86 ANSI C Emulation, version 0.2
(II) do I need RAC? No, I don't.
(II) resource ranges after preInit:
[0] 0 0 0x41000000 - 0x41000fff (0x1000) MS[B]
[1] 0 0 0x40000000 - 0x40ffffff (0x1000000) MS[B]
[2] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[3] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[4] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[5] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[6] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[7] -1 0 0x41200000 - 0x412003ff (0x400) MX[B]
[8] -1 0 0x41300000 - 0x41303fff (0x4000) MX[B]
[9] -1 0 0x41400000 - 0x414007ff (0x800) MX[B]
[10] -1 0 0x41100000 - 0x41100fff (0x1000) MX[B]
[11] -1 0 0x44000000 - 0x43ffffff (0x0) MX[B]O
[12] -1 0 0x41000000 - 0x41000fff (0x1000) MX[B](B)
[13] -1 0 0x40000000 - 0x40ffffff (0x1000000) MX[B](B)
[14] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B](OprU)
[15] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B](OprU)
[16] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B](OprU)
[17] 0 0 0x00001000 - 0x000010ff (0x100) IS[B]
[18] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[19] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[20] -1 0 0x00002c80 - 0x00002c9f (0x20) IX[B]
[21] -1 0 0x00002cb0 - 0x00002cbf (0x10) IX[B]
[22] -1 0 0x00002c00 - 0x00002c7f (0x80) IX[B]
[23] -1 0 0x00002420 - 0x00002427 (0x8) IX[B]
[24] -1 0 0x00002400 - 0x0000241f (0x20) IX[B]
[25] -1 0 0x00002000 - 0x000020ff (0x100) IX[B]
[26] -1 0 0x00001000 - 0x000010ff (0x100) IX[B](B)
[27] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B](OprU)
[28] 0 0 0x000003c0 - 0x000003df (0x20) IS[B](OprU)
(==) ATI(0): Write-combining range (0x40000000,0x400000)
(II) ATI(0): Largest offscreen areas (with overlaps):
(II) ATI(0): 640 x 6072 rectangle at 0,480
(II) ATI(0): Using XFree86 Acceleration Architecture (XAA)
Screen to screen bit blits
Solid filled rectangles
8x8 mono pattern filled rectangles
Indirect CPU to Screen color expansion
Solid Lines
Offscreen Pixmaps
Setting up tile and stipple cache:
32 128x128 slots
18 256x256 slots
7 512x512 slots
(==) ATI(0): Backing store disabled
(==) ATI(0): Silken mouse enabled
(==) RandR enabled
Symbol xf86SetDDCproperties from module /usr/X11R6/lib/modules/drivers/atimisc_drv.o is unresolved!
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension LBX
(II) Initializing built-in extension XC-APPGROUP
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFree86-Bigfont
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(**) Option "Protocol" "auto"
(**) Mouse0: Protocol: "auto"
(**) Option "CorePointer"
(**) Mouse0: Core Pointer
(**) Option "Device" "/dev/mouse"
(**) Mouse0: Emulate3Buttons, Emulate3Timeout: 50
(==) Mouse0: Buttons: 3
(II) Keyboard "Keyboard0" handled by legacy driver
(II) XINPUT: Adding extended input device "Mouse0" (type: MOUSE)
(--) Mouse0: PnP-detected protocol: "ImPS/2"
(II) Mouse0: ps2EnableDataReporting: succeeded
(END)
|
and instead of x starting, I get a blank screen (only recoverale by ctrl+alt+backspace - not possible to switch virtual consoles) and my monitor powers down.
I would be happy to post any more config files if needed.
Thanks in advance to anyone who helps debug my problem,
Cam |
|
| Back to top |
|
 |
brantgurga
Tux's lil' helper
Joined: 30 Dec 2003
Posts: 75
Location: Indianapolis, IN
|
| Posted: Thu Feb 19, 2004 6:06 am Post subject: |
|
|
| Quote: | | Symbol xf86SetDDCproperties from module /usr/X11R6/lib/modules/drivers/atimisc_drv.o is unresolved! |
You might make sure that this driver is build properly. Show your XF86Config as well. For DRI on my radeon, I had to set the default color depth to 16 or 24. X defaults to 8bit color depth which the DRI hardware does not support. |
|
| Back to top |
|
|
cmack
n00b
Joined: 02 Sep 2003
Posts: 56
Location: Vancouver, Canada
|
| Posted: Thu Feb 19, 2004 6:46 am Post subject: |
|
|
How can I check if the driver is built properly?
The config file generated by XFree86 -configure follows:
| Code: |
Section "ServerLayout"
Identifier "XFree86 Configured"
Screen 0 "Screen0" 0 0
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection
Section "Files"
RgbPath "/usr/X11R6/lib/X11/rgb"
ModulePath "/usr/X11R6/lib/modules"
FontPath "/usr/X11R6/lib/X11/fonts/misc/"
FontPath "/usr/X11R6/lib/X11/fonts/Speedo/"
FontPath "/usr/X11R6/lib/X11/fonts/Type1/"
FontPath "/usr/X11R6/lib/X11/fonts/CID/"
FontPath "/usr/X11R6/lib/X11/fonts/75dpi/"
FontPath "/usr/X11R6/lib/X11/fonts/100dpi/"
EndSection
Section "Module"
Load "record"
Load "extmod"
Load "dbe"
Load "dri"
Load "glx"
Load "xtrap"
Load "type1"
Load "speedo"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "keyboard"
EndSection
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/mouse"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Monitor Vendor"
ModelName "Monitor Model"
EndSection
Section "Device"
### Available Driver options are:-
### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
### [arg]: arg optional
#Option "accel" # [<bool>]
#Option "crt_display" # [<bool>]
#Option "composite_sync" # [<bool>]
#Option "hw_cursor" # [<bool>]
#Option "linear" # [<bool>]
#Option "mmio_cache" # [<bool>]
#Option "panel_display" # [<bool>]
#Option "probe_clocks" # [<bool>]
#Option "reference_clock" # <freq>
#Option "shadow_fb" # [<bool>]
#Option "sw_cursor" # [<bool>]
Identifier "Card0"
Driver "ati"
VendorName "ATI"
BoardName "3D Rage LT Pro AGP-133"
ChipSet "ati"
ChipId 0x4c42
ChipRev 0xdc
BusID "PCI:1:0:0"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
SubSection "Display"
Depth 1
EndSubSection
SubSection "Display"
Depth 4
EndSubSection
SubSection "Display"
Depth 8
EndSubSection
SubSection "Display"
Depth 15
EndSubSection
SubSection "Display"
Depth 16
EndSubSection
SubSection "Display"
Depth 24
EndSubSection
EndSection
|
Hopefully this helps. Thank you very much for the quick reply - I can't wait to get this working.
Cam |
|
| Back to top |
|
|
brantgurga
Tux's lil' helper
Joined: 30 Dec 2003
Posts: 75
Location: Indianapolis, IN
|
| Posted: Thu Feb 19, 2004 6:57 am Post subject: |
|
|
| Here are a couple of things to try: set the default depth higher than 8bits per pixel. Force DDC detection of monitor modes. Manual entry of monitor mode. |
|
| Back to top |
|
|
cmack
n00b
Joined: 02 Sep 2003
Posts: 56
Location: Vancouver, Canada
|
| Posted: Thu Feb 19, 2004 2:10 pm Post subject: |
|
|
How do I "force DDC detection of monitor modes"? Sorry - excuse my n00bness.
If I use xf86config to generate a config file, presumably manually entering my monitor modes and default color depth, I get the DDC error as well as some fatal one - I'll paste it in a minute.
Thanks for your replies, I'll try those suggestions,
Cam |
|
| Back to top |
|
|
cmack
n00b
Joined: 02 Sep 2003
Posts: 56
Location: Vancouver, Canada
|
| Posted: Thu Feb 19, 2004 2:13 pm Post subject: |
|
|
Error as seen from command line after an attempt to startx after doing xf86config.
| Code: |
This is a pre-release version of XFree86, and is not supported in any
way. Bugs may be reported to XFree86@XFree86.Org and patches submitted
to fixes@XFree86.Org. Before reporting bugs in pre-release versions,
please check the latest version in the XFree86 CVS repository
(http://www.XFree86.Org/cvs).
XFree86 Version 4.3.0.1
Release Date: 15 August 2003
X Protocol Version 11, Revision 0, Release 6.6
Build Operating System: Linux 2.4.23-ck1 i686 [ELF]
Build Date: 15 February 2004
Before reporting problems, check http://www.XFree86.Org/
to make sure that you have the latest version.
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/XFree86.0.log", Time: Wed Feb 18 22:22:19 2004
(==) Using config file: "/etc/X11/XF86Config"
Using vt 7
Symbol xf86SetDDCproperties from module /usr/X11R6/lib/modules/drivers/atimisc_drv.o is unresolved!
XIO: fatal IO error 104 (Connection reset by peer) on X server ":0.0"
after 0 requests (0 known processed) with 0 events remaining.
|
I could post my config file as generated by that if you wish...
Thanks,
Cam |
|
| Back to top |
|
|
cmack
n00b
Joined: 02 Sep 2003
Posts: 56
Location: Vancouver, Canada
|
| Posted: Fri Feb 20, 2004 7:30 am Post subject: |
|
|
| BUMP! |
|
| Back to top |
|
|
cmack
n00b
Joined: 02 Sep 2003
Posts: 56
Location: Vancouver, Canada
|
| Posted: Sun Feb 22, 2004 7:02 pm Post subject: |
|
|
this is really starting to bother me - 2 weeks with a running system and still no x!
Does anyone have any suggestions? Is there any chance I'd find success by emerging 4.2.1 or something? I think I'll try that, but in the meantime, I'd love to hear any suggestions or tips that might solve my problem, or how to force DDC detection.
Thanks,
Cam |
|
| Back to top |
|
|
tcma
Apprentice
Joined: 28 Jun 2004
Posts: 208
|
| Posted: Wed Jul 07, 2004 4:54 pm Post subject: |
|
|
I encountered a similar problem.
If your problem is solved, please post a working config file.
| cmack wrote: | Error as seen from command line after an attempt to startx after doing xf86config.
| Code: |
This is a pre-release version of XFree86, and is not supported in any
way. Bugs may be reported to XFree86@XFree86.Org and patches submitted
to fixes@XFree86.Org. Before reporting bugs in pre-release versions,
please check the latest version in the XFree86 CVS repository
(http://www.XFree86.Org/cvs).
XFree86 Version 4.3.0.1
Release Date: 15 August 2003
X Protocol Version 11, Revision 0, Release 6.6
Build Operating System: Linux 2.4.23-ck1 i686 [ELF]
Build Date: 15 February 2004
Before reporting problems, check http://www.XFree86.Org/
to make sure that you have the latest version.
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/XFree86.0.log", Time: Wed Feb 18 22:22:19 2004
(==) Using config file: "/etc/X11/XF86Config"
Using vt 7
Symbol xf86SetDDCproperties from module /usr/X11R6/lib/modules/drivers/atimisc_drv.o is unresolved!
XIO: fatal IO error 104 (Connection reset by peer) on X server ":0.0"
after 0 requests (0 known processed) with 0 events remaining.
|
I could post my config file as generated by that if you wish...
Thanks,
Cam |
|
|
| Back to top |
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
|
|
Desktop Environments
