Gentoo Forums
Gentoo Forums
Gentoo Forums
Quick Search: in
ACPI woes
View unanswered posts
View posts from last 24 hours

 
Reply to topic    Gentoo Forums Forum Index Kernel & Hardware
View previous topic :: View next topic  
Author Message
rabidsg
n00b
n00b


Joined: 07 Jan 2004
Posts: 8

PostPosted: Wed Jan 07, 2004 12:05 pm    Post subject: ACPI woes Reply with quote

Alright, so I have a wierd problem occuring. I'm on a toshiba sattellite pro 4300, and I compiled ACPI support into the kernel. I'm pretty sure my bios supports ACPI since it says ACPI bios version 2.70, altho I believe its ACPI 1.0b, the bios verison being 2.70. Anyhows, in order to get the kernel to use ACPI i need to do acpi=force, since it see's it as a bios from 99 and told me if i want acpi i would need to do so. When i did acpi, all of a sudden now, my network card won't work, it appears theres some sort of IRQ issue now that wasn't and isn't there when i don't use acpi=force. I was wondering if anyone had any insight as to how to get my network card working now, the modules still load. I'll include the startup log for when acpi=force is used, and when acpi=force isn't used.

I did try acpi=force with pci=noapci with no avail, and I also tried a seperate kernel with the acpi patch.diff file, which did the same thing as this kernel, which is why i broke down and did the acpi=force thing.

Anyhows, I don't think I did to bad for a complete linux noob, altho I will say these forums provided most helpful, but time to break down and ask for some help now. If it makes any difference, with acpid and acpi=force alot shows up in /proc/acpi, but those ACPI errors at the begining probably mean something..

Thanks in Advance

With acpi=force
Quote:

an 7 01:13:53 pegasys Linux version 2.6.0 (root@pegasys) (gcc version 3.2.3 20030422 (Gentoo Linux 1.4 3.2.3-r3, propolice)) #1 T$
Jan 7 01:13:53 pegasys BIOS-provided physical RAM map:
Jan 7 01:13:53 pegasys BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
Jan 7 01:13:53 pegasys BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
Jan 7 01:13:53 pegasys BIOS-e820: 00000000000e8000 - 00000000000e8640 (reserved)
Jan 7 01:13:53 pegasys BIOS-e820: 00000000000e8640 - 00000000000e8840 (ACPI NVS)
Jan 7 01:13:53 pegasys BIOS-e820: 00000000000e8840 - 00000000000ec000 (reserved)
Jan 7 01:13:53 pegasys BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
Jan 7 01:13:53 pegasys BIOS-e820: 0000000000100000 - 0000000013fe0000 (usable)
Jan 7 01:13:53 pegasys BIOS-e820: 0000000013fe0000 - 0000000013ff0000 (ACPI data)
Jan 7 01:13:53 pegasys BIOS-e820: 0000000013ff0000 - 0000000014000000 (reserved)
Jan 7 01:13:53 pegasys BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
Jan 7 01:13:53 pegasys 319MB LOWMEM available.
Jan 7 01:13:53 pegasys On node 0 totalpages: 81888
Jan 7 01:13:53 pegasys DMA zone: 4096 pages, LIFO batch:1
Jan 7 01:13:53 pegasys Normal zone: 77792 pages, LIFO batch:16
Jan 7 01:13:53 pegasys HighMem zone: 0 pages, LIFO batch:1
Jan 7 01:13:53 pegasys DMI 2.3 present.
Jan 7 01:13:53 pegasys ACPI: RSDP (v000 TOSHIB ) @ 0x000f0170
Jan 7 01:13:53 pegasys ACPI: RSDT (v001 TOSHIB 750 0x00970814 TASM 0x04010000) @ 0x13fe0000
Jan 7 01:13:53 pegasys ACPI: FADT (v001 TOSHIB 750 0x00970814 TASM 0x04010000) @ 0x13fe0054
Jan 7 01:13:53 pegasys ACPI: DSDT (v001 TOSHIB 4220 0x20000613 MSFT 0x0100000a) @ 0x00000000
Jan 7 01:13:53 pegasys Building zonelist for node : 0
Jan 7 01:13:53 pegasys Kernel command line: root=/dev/hda3 acpi=force
Jan 7 01:13:53 pegasys Initializing CPU#0
Jan 7 01:13:53 pegasys PID hash table entries: 2048 (order 11: 16384 bytes)
Jan 7 01:13:53 pegasys Detected 597.303 MHz processor.
Jan 7 01:13:53 pegasys Console: colour VGA+ 80x25
Jan 7 01:13:53 pegasys Memory: 318768k/327552k available (3014k kernel code, 7992k reserved, 961k data, 148k init, 0k highmem)
Jan 7 01:13:53 pegasys Calibrating delay loop... 1179.64 BogoMIPS
Jan 7 01:13:53 pegasys Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
Jan 7 01:13:53 pegasys Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
Jan 7 01:13:53 pegasys Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
Jan 7 01:13:53 pegasys checking if image is initramfs...it isn't (no cpio magic); looks like an initrd
Jan 7 01:13:53 pegasys Freeing initrd memory: 419k freed
Jan 7 01:13:53 pegasys CPU: After generic identify, caps: 0383f9ff 00000000 00000000 00000000
Jan 7 01:13:53 pegasys CPU: After vendor identify, caps: 0383f9ff 00000000 00000000 00000000
Jan 7 01:13:53 pegasys CPU: L1 I cache: 16K, L1 D cache: 16K
Jan 7 01:13:53 pegasys CPU: L2 cache: 256K
Jan 7 01:13:53 pegasys CPU: After all inits, caps: 0383f9ff 00000000 00000000 00000040
Jan 7 01:13:53 pegasys Intel machine check architecture supported.
Jan 7 01:13:53 pegasys Intel machine check reporting enabled on CPU#0.
Jan 7 01:13:53 pegasys CPU: Intel Pentium III (Coppermine) stepping 03
Jan 7 01:13:53 pegasys Enabling fast FPU save and restore... done.
Jan 7 01:13:53 pegasys Enabling unmasked SIMD FPU exception support... done.
Jan 7 01:13:53 pegasys Checking 'hlt' instruction... OK.
Jan 7 01:13:53 pegasys POSIX conformance testing by UNIFIX
Jan 7 01:13:53 pegasys NET: Registered protocol family 16
Jan 7 01:13:53 pegasys PCI: Using configuration type 1
Jan 7 01:13:53 pegasys mtrr: v2.0 (20020519)
Jan 7 01:13:53 pegasys ACPI: Subsystem revision 20031002
Jan 7 01:13:53 pegasys ACPI-0109: *** Error: No object was returned from [\_SB_.LNKA._STA] (Node d3fde840), AE_NOT_EXIST
Jan 7 01:13:53 pegasys ACPI-0109: *** Error: No object was returned from [\_SB_.LNKB._STA] (Node d3fde940), AE_NOT_EXIST
Jan 7 01:13:53 pegasys ACPI-0109: *** Error: No object was returned from [\_SB_.LNKC._STA] (Node d3f645c0), AE_NOT_EXIST
Jan 7 01:13:53 pegasys ACPI-0109: *** Error: No object was returned from [\_SB_.LNKD._STA] (Node d3f644c0), AE_NOT_EXIST
Jan 7 01:13:53 pegasys ACPI-0109: *** Error: No object was returned from [\_SB_.PCI0.FNC0.FDD_._STA] (Node d3f70e60), AE_NOT_EXIST
Jan 7 01:13:53 pegasys ACPI-0109: *** Error: No object was returned from [\_SB_.PCI0.FNC0.COM_._STA] (Node d3f70d20), AE_NOT_EXIST
Jan 7 01:13:53 pegasys ACPI-0109: *** Error: No object was returned from [\_SB_.PCI0.FNC0.PRT_._STA] (Node d3f70ba0), AE_NOT_EXIST
Jan 7 01:13:53 pegasys ACPI-0109: *** Error: No object was returned from [\_SB_.PCI0.FNC0.PRT1._STA] (Node d3f70ac0), AE_NOT_EXIST
Jan 7 01:13:53 pegasys ACPI-0109: *** Error: No object was returned from [\_SB_.PCI0.FNC0.PCC0._STA] (Node d3f709c0), AE_NOT_EXIST
Jan 7 01:13:53 pegasys ACPI: Interpreter enabled
Jan 7 01:13:53 pegasys ACPI: Using PIC for interrupt routing
Jan 7 01:13:53 pegasys ACPI-0109: *** Error: No object was returned from [\_SB_.LNKE._PRS] (Node d3f643a0), AE_NOT_EXIST
Jan 7 01:13:53 pegasys ACPI: PCI Root Bridge [PCI0] (00:00)
Jan 7 01:13:53 pegasys PCI: Probing PCI hardware (bus 00)
Jan 7 01:13:53 pegasys ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
Jan 7 01:13:53 pegasys ACPI: Power Resource [PIHD] (on)
Jan 7 01:13:53 pegasys ACPI: Power Resource [PMHD] (on)
Jan 7 01:13:53 pegasys ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT]
Jan 7 01:13:53 pegasys ACPI: Power Resource [PFAN] (off)
Jan 7 01:13:53 pegasys Linux Plug and Play Support v0.97 (c) Adam Belay
Jan 7 01:13:53 pegasys PnPBIOS: Scanning system for PnP BIOS support...
Jan 7 01:13:53 pegasys PnPBIOS: Found PnP BIOS installation structure at 0xc00f9540
Jan 7 01:13:53 pegasys PnPBIOS: PnP BIOS version 1.0, entry 0xf0000:0x9696, dseg 0x0
Jan 7 01:13:53 pegasys PnPBIOS: 15 nodes reported by PnP BIOS; 15 recorded by driver
Jan 7 01:13:53 pegasys SCSI subsystem initialized
Jan 7 01:13:53 pegasys Linux Kernel Card Services
Jan 7 01:13:53 pegasys options: [pci] [cardbus] [pm]
Jan 7 01:13:53 pegasys ACPI: No IRQ known for interrupt pin D of device 0000:00:05.2
Jan 7 01:13:53 pegasys ACPI: No IRQ known for interrupt pin A of device 0000:00:07.0
Jan 7 01:13:53 pegasys ACPI: No IRQ known for interrupt pin A of device 0000:00:09.0
Jan 7 01:13:53 pegasys ACPI: No IRQ known for interrupt pin A of device 0000:00:0b.0 - using IRQ 255
Jan 7 01:13:53 pegasys ACPI: No IRQ known for interrupt pin B of device 0000:00:0b.1 - using IRQ 255
Jan 7 01:13:53 pegasys ACPI: No IRQ known for interrupt pin A of device 0000:00:0c.0
Jan 7 01:13:53 pegasys ACPI: No IRQ known for interrupt pin A of device 0000:01:00.0
Jan 7 01:13:53 pegasys PCI: Using ACPI for IRQ routing
Jan 7 01:13:53 pegasys PCI: if you experience problems, try using option 'pci=noacpi' or even 'acpi=off'
Jan 7 01:13:53 pegasys irda_init()
Jan 7 01:13:53 pegasys NET: Registered protocol family 23
Jan 7 01:13:53 pegasys devfs: v1.22 (20021013) Richard Gooch (rgooch@atnf.csiro.au)
Jan 7 01:13:53 pegasys devfs: boot_options: 0x0
Jan 7 01:13:53 pegasys SGI XFS for Linux with ACLs, realtime, no debug enabled
Jan 7 01:13:53 pegasys SGI XFS Quota Management subsystem
Jan 7 01:13:53 pegasys Initializing Cryptographic API
Jan 7 01:13:53 pegasys Limiting direct PCI/PCI transfers.
Jan 7 01:13:53 pegasys isapnp: Scanning for PnP cards...
Jan 7 01:13:53 pegasys isapnp: No Plug & Play device found
Jan 7 01:13:53 pegasys pty: 256 Unix98 ptys configured
Jan 7 01:13:53 pegasys Toshiba System Managment Mode driver v1.11 26/9/2001
Jan 7 01:13:53 pegasys Real Time Clock Driver v1.12
Jan 7 01:13:53 pegasys Linux agpgart interface v0.100 (c) Dave Jones
Jan 7 01:13:53 pegasys agpgart: Detected an Intel 440BX Chipset.
Jan 7 01:13:53 pegasys agpgart: Maximum main memory to use for agp memory: 262M
Jan 7 01:13:53 pegasys agpgart: AGP aperture is 256M @ 0xd0000000
Jan 7 01:13:53 pegasys [drm] Initialized tdfx 1.0.0 20010216 on minor 0
Jan 7 01:13:53 pegasys [drm] Initialized radeon 1.9.0 20020828 on minor 1
Jan 7 01:13:53 pegasys Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing disabled
Jan 7 01:13:53 pegasys ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
Jan 7 01:13:53 pegasys Using anticipatory io scheduler
Jan 7 01:13:53 pegasys Floppy drive(s): fd0 is 1.44M
Jan 7 01:13:53 pegasys FDC 0 is a post-1991 82077
Jan 7 01:13:53 pegasys Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
Jan 7 01:13:53 pegasys ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
Jan 7 01:13:53 pegasys PIIX4: IDE controller at PCI slot 0000:00:05.1
Jan 7 01:13:53 pegasys PIIX4: chipset revision 1
Jan 7 01:13:53 pegasys PIIX4: not 100% native mode: will probe irqs later
Jan 7 01:13:53 pegasys ide0: BM-DMA at 0xfff0-0xfff7, BIOS settings: hda:DMA, hdb:pio
Jan 7 01:13:53 pegasys ide1: BM-DMA at 0xfff8-0xffff, BIOS settings: hdc:DMA, hdd:pio
Jan 7 01:13:53 pegasys hda: HITACHI_DK23EA-40, ATA DISK drive
Jan 7 01:13:53 pegasys ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Jan 7 01:13:53 pegasys hdc: TOSHIBA DVD-ROM SD-C2402, ATAPI CD/DVD-ROM drive
Jan 7 01:13:53 pegasys ide1 at 0x170-0x177,0x376 on irq 15
Jan 7 01:13:53 pegasys hda: max request size: 128KiB
Jan 7 01:13:53 pegasys hda: 78140160 sectors (40007 MB) w/2048KiB Cache, CHS=65535/16/63, UDMA(33)
Jan 7 01:13:53 pegasys /dev/ide/host0/bus0/target0/lun0: p1 p2 p3
Jan 7 01:13:53 pegasys hdc: ATAPI 24X DVD-ROM drive, 128kB Cache, UDMA(33)
Jan 7 01:13:53 pegasys Uniform CD-ROM driver Revision: 3.12
Jan 7 01:13:53 pegasys mice: PS/2 mouse device common for all mice
Jan 7 01:13:53 pegasys input: ImPS/2 Logitech Wheel Mouse on isa0060/serio1
Jan 7 01:13:53 pegasys serio: i8042 AUX port at 0x60,0x64 irq 12
Jan 7 01:13:53 pegasys input: AT Translated Set 2 keyboard on isa0060/serio0
Jan 7 01:13:53 pegasys serio: i8042 KBD port at 0x60,0x64 irq 1
Jan 7 01:13:53 pegasys NET: Registered protocol family 2
Jan 7 01:13:53 pegasys IP: routing cache hash table of 2048 buckets, 16Kbytes
Jan 7 01:13:53 pegasys TCP: Hash tables configured (established 32768 bind 65536)
Jan 7 01:13:53 pegasys Initializing IPsec netlink socket
Jan 7 01:13:53 pegasys NET: Registered protocol family 1
Jan 7 01:13:53 pegasys NET: Registered protocol family 10
Jan 7 01:13:53 pegasys IPv6 over IPv4 tunneling driver
Jan 7 01:13:53 pegasys NET: Registered protocol family 17
Jan 7 01:13:53 pegasys NET: Registered protocol family 15
Jan 7 01:13:53 pegasys kjournald starting. Commit interval 5 seconds
Jan 7 01:13:53 pegasys EXT3-fs: mounted filesystem with ordered data mode.
Jan 7 01:13:53 pegasys VFS: Mounted root (ext3 filesystem) readonly.
Jan 7 01:13:53 pegasys Freeing unused kernel memory: 148k freed
Jan 7 01:13:53 pegasys Adding 787176k swap on /dev/hda2. Priority:-1 extents:1
Jan 7 01:13:53 pegasys EXT3 FS on hda3, internal journal
Jan 7 01:13:53 pegasys st: Version 20030811, fixed bufsize 32768, s/g segs 256
Jan 7 01:13:53 pegasys PCI: Enabling device 0000:00:0b.0 (0000 -> 0002)
Jan 7 01:13:53 pegasys ACPI: No IRQ known for interrupt pin A of device 0000:00:0b.0 - using IRQ 255
Jan 7 01:13:53 pegasys Yenta: CardBus bridge found at 0000:00:0b.0 [1179:0001]
Jan 7 01:13:53 pegasys Yenta: ISA IRQ list 0cb0, PCI irq0
Jan 7 01:13:53 pegasys Socket status: 30000020
Jan 7 01:13:53 pegasys PCI: Enabling device 0000:00:0b.1 (0000 -> 0002)
Jan 7 01:13:53 pegasys ACPI: No IRQ known for interrupt pin B of device 0000:00:0b.1 - using IRQ 255
Jan 7 01:13:53 pegasys Yenta: CardBus bridge found at 0000:00:0b.1 [1179:0001]
Jan 7 01:13:53 pegasys Yenta: ISA IRQ list 0cb0, PCI irq0
Jan 7 01:13:53 pegasys Socket status: 30000020
Jan 7 01:13:53 pegasys Linux Tulip driver version 1.1.13 (May 11, 2002)
Jan 7 01:13:53 pegasys drivers/usb/core/usb.c: registered new driver usbfs
Jan 7 01:13:53 pegasys drivers/usb/core/usb.c: registered new driver hub
Jan 7 01:13:53 pegasys ohci1394: $Rev: 1045 $ Ben Collins <bcollins@debian.org>
Jan 7 01:13:53 pegasys PCI: Enabling device 0000:02:00.0 (0000 -> 0002)
Jan 7 01:13:53 pegasys ACPI: No IRQ known for interrupt pin A of device 0000:02:00.0
Jan 7 01:13:53 pegasys PCI: Setting latency timer of device 0000:02:00.0 to 64
Jan 7 01:13:53 pegasys ohci1394: Failed to allocate shared interrupt 0
Jan 7 01:13:53 pegasys ohci1394: probe of 0000:02:00.0 failed with error -12
Jan 7 01:13:53 pegasys PCI: Enabling device 0000:06:00.0 (0000 -> 0003)
Jan 7 01:13:53 pegasys ACPI: No IRQ known for interrupt pin A of device 0000:06:00.0
Jan 7 01:13:53 pegasys PCI: Setting latency timer of device 0000:06:00.0 to 64
Jan 7 01:13:53 pegasys eth0: ADMtek Comet rev 17 at 0xd48b7000, 00:10:7A:68:18:5A, IRQ 0.
Jan 7 01:13:53 pegasys ACPI: No IRQ known for interrupt pin A of device 0000:00:0c.0
Jan 7 01:13:53 pegasys ymfpci: YMF744 at 0xefff8000 IRQ 11
Jan 7 01:13:53 pegasys ac97_codec: AC97 Audio codec, id: AKM2 (Asahi Kasei AK4543)
Jan 7 01:13:53 pegasys ACPI: No IRQ known for interrupt pin A of device 0000:00:09.0
Jan 7 01:13:53 pegasys IrDA: Registered device irda0
Jan 7 01:13:53 pegasys toshoboe: Using multiple tasks, version $Id: donauboe.c V2.18 ven jan 10 03:14:16 2003$
Jan 7 01:13:57 pegasys dhcpcd[3570]: dhcpStart: ioctl SIOCSIFFLAGS: Device or resource busy
Jan 7 01:13:57 pegasys rc-scripts: Failed to bring eth0 up
Jan 7 01:13:57 pegasys rc-scripts: ERROR: Problem starting needed services.
Jan 7 01:13:57 pegasys rc-scripts: "netmount" was not started.
Jan 7 01:13:57 pegasys rc-scripts: ERROR: Problem starting needed services
Jan 7 01:13:57 pegasys rc-scripts: "sshd" was not started.
Jan 7 01:13:58 pegasys cron[3711]: (CRON) STARTUP (fork ok)
Jan 7 01:13:58 pegasys rc-scripts: ERROR: Problem starting needed services.
Jan 7 01:13:58 pegasys rc-scripts: "xinetd" was not started.
Jan 7 01:14:04 pegasys login(pam_unix)[3819]: session opened for user root by (uid=0)
Jan 7 01:15:00 pegasys CRON[3833]: (root) CMD (test -x /usr/sbin/run-crons && /usr/sbin/run-crons )
Jan 7 01:16:02 pegasys kjournald starting. Commit interval 5 seconds
Jan 7 01:16:02 pegasys EXT3 FS on hda1, internal journal
Jan 7 01:16:02 pegasys EXT3-fs: mounted filesystem with ordered data mode.


without acpi=force
Quote:

Jan 7 01:57:23 pegasys Linux version 2.6.0 (root@pegasys) (gcc version 3.2.3 20030422 (Gentoo Linux 1.4 3.2.3-r3, propolice)) #1 T$
Jan 7 01:57:23 pegasys BIOS-provided physical RAM map:
Jan 7 01:57:23 pegasys BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
Jan 7 01:57:23 pegasys BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
Jan 7 01:57:23 pegasys BIOS-e820: 00000000000e8000 - 00000000000e8640 (reserved)
Jan 7 01:57:23 pegasys BIOS-e820: 00000000000e8640 - 00000000000e8840 (ACPI NVS)
Jan 7 01:57:23 pegasys BIOS-e820: 00000000000e8840 - 00000000000ec000 (reserved)
Jan 7 01:57:23 pegasys BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
Jan 7 01:57:23 pegasys BIOS-e820: 0000000000100000 - 0000000013fe0000 (usable)
Jan 7 01:57:23 pegasys BIOS-e820: 0000000013fe0000 - 0000000013ff0000 (ACPI data)
Jan 7 01:57:23 pegasys BIOS-e820: 0000000013ff0000 - 0000000014000000 (reserved)
Jan 7 01:57:23 pegasys BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
Jan 7 01:57:23 pegasys 319MB LOWMEM available.
Jan 7 01:57:23 pegasys On node 0 totalpages: 81888
Jan 7 01:57:23 pegasys DMA zone: 4096 pages, LIFO batch:1
Jan 7 01:57:23 pegasys Normal zone: 77792 pages, LIFO batch:16
Jan 7 01:57:23 pegasys HighMem zone: 0 pages, LIFO batch:1
Jan 7 01:57:23 pegasys DMI 2.3 present.
Jan 7 01:57:23 pegasys ACPI disabled because your bios is from 1999 and too old
Jan 7 01:57:23 pegasys You can enable it with acpi=force
Jan 7 01:57:23 pegasys ACPI: RSDP (v000 TOSHIB ) @ 0x000f0170
Jan 7 01:57:23 pegasys ACPI: RSDT (v001 TOSHIB 750 0x00970814 TASM 0x04010000) @ 0x13fe0000
Jan 7 01:57:23 pegasys ACPI: FADT (v001 TOSHIB 750 0x00970814 TASM 0x04010000) @ 0x13fe0054
Jan 7 01:57:23 pegasys ACPI: DSDT (v001 TOSHIB 4220 0x20000613 MSFT 0x0100000a) @ 0x00000000
Jan 7 01:57:23 pegasys Building zonelist for node : 0
Jan 7 01:57:23 pegasys Kernel command line: root=/dev/hda3
Jan 7 01:57:23 pegasys Initializing CPU#0
Jan 7 01:57:23 pegasys PID hash table entries: 2048 (order 11: 16384 bytes)
Jan 7 01:57:23 pegasys Detected 597.123 MHz processor.
Jan 7 01:57:23 pegasys Console: colour VGA+ 80x25
Jan 7 01:57:23 pegasys Memory: 318768k/327552k available (3014k kernel code, 7992k reserved, 961k data, 148k init, 0k highmem)
Jan 7 01:57:23 pegasys Calibrating delay loop... 1179.64 BogoMIPS
Jan 7 01:57:23 pegasys Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
Jan 7 01:57:23 pegasys Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
Jan 7 01:57:23 pegasys Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
Jan 7 01:57:23 pegasys checking if image is initramfs...it isn't (no cpio magic); looks like an initrd
Jan 7 01:57:23 pegasys Freeing initrd memory: 419k freed
Jan 7 01:57:23 pegasys CPU: After generic identify, caps: 0383f9ff 00000000 00000000 00000000
Jan 7 01:57:23 pegasys CPU: After vendor identify, caps: 0383f9ff 00000000 00000000 00000000
Jan 7 01:57:23 pegasys CPU: L1 I cache: 16K, L1 D cache: 16K
Jan 7 01:57:23 pegasys CPU: L2 cache: 256K
Jan 7 01:57:23 pegasys CPU: After all inits, caps: 0383f9ff 00000000 00000000 00000040
Jan 7 01:57:23 pegasys Intel machine check architecture supported.
Jan 7 01:57:23 pegasys Intel machine check reporting enabled on CPU#0.
Jan 7 01:57:23 pegasys CPU: Intel Pentium III (Coppermine) stepping 03
Jan 7 01:57:23 pegasys Enabling fast FPU save and restore... done.
Jan 7 01:57:23 pegasys Enabling unmasked SIMD FPU exception support... done.
Jan 7 01:57:23 pegasys Checking 'hlt' instruction... OK.
Jan 7 01:57:23 pegasys POSIX conformance testing by UNIFIX
Jan 7 01:57:23 pegasys NET: Registered protocol family 16
Jan 7 01:57:23 pegasys PCI: Using configuration type 1
Jan 7 01:57:23 pegasys mtrr: v2.0 (20020519)
Jan 7 01:57:23 pegasys ACPI: Subsystem revision 20031002
Jan 7 01:57:23 pegasys ACPI: Interpreter disabled.
Jan 7 01:57:23 pegasys Linux Plug and Play Support v0.97 (c) Adam Belay
Jan 7 01:57:23 pegasys PnPBIOS: Scanning system for PnP BIOS support...
Jan 7 01:57:23 pegasys PnPBIOS: Found PnP BIOS installation structure at 0xc00f9540
Jan 7 01:57:23 pegasys PnPBIOS: PnP BIOS version 1.0, entry 0xf0000:0x9696, dseg 0x0
Jan 7 01:57:23 pegasys PnPBIOS: 15 nodes reported by PnP BIOS; 15 recorded by driver
Jan 7 01:57:23 pegasys SCSI subsystem initialized
Jan 7 01:57:23 pegasys Linux Kernel Card Services
Jan 7 01:57:23 pegasys options: [pci] [cardbus] [pm]
Jan 7 01:57:23 pegasys ACPI: ACPI tables contain no PCI IRQ routing entries
Jan 7 01:57:23 pegasys PCI: Invalid ACPI-PCI IRQ routing table
Jan 7 01:57:23 pegasys PCI: Probing PCI hardware
Jan 7 01:57:23 pegasys PCI: Probing PCI hardware (bus 00)
Jan 7 01:57:23 pegasys PCI: Using IRQ router PIIX/ICH [8086/7110] at 0000:00:05.0
Jan 7 01:57:23 pegasys PCI: IRQ 0 for device 0000:00:0b.0 doesn't match PIRQ mask - try pci=usepirqmask
Jan 7 01:57:23 pegasys PCI: Found IRQ 11 for device 0000:00:0b.0
Jan 7 01:57:23 pegasys PCI: Sharing IRQ 11 with 0000:01:00.0
Jan 7 01:57:23 pegasys PCI: IRQ 0 for device 0000:00:0b.1 doesn't match PIRQ mask - try pci=usepirqmask
Jan 7 01:57:23 pegasys PCI: Found IRQ 11 for device 0000:00:0b.1
Jan 7 01:57:23 pegasys PCI: Sharing IRQ 11 with 0000:00:0c.0
Jan 7 01:57:23 pegasys irda_init()
Jan 7 01:57:23 pegasys NET: Registered protocol family 23
Jan 7 01:57:23 pegasys devfs: v1.22 (20021013) Richard Gooch (rgooch@atnf.csiro.au)
Jan 7 01:57:23 pegasys devfs: boot_options: 0x0
Jan 7 01:57:23 pegasys SGI XFS for Linux with ACLs, realtime, no debug enabled
Jan 7 01:57:23 pegasys SGI XFS Quota Management subsystem
Jan 7 01:57:23 pegasys Initializing Cryptographic API
Jan 7 01:57:23 pegasys Limiting direct PCI/PCI transfers.
Jan 7 01:57:23 pegasys isapnp: Scanning for PnP cards...
Jan 7 01:57:23 pegasys isapnp: No Plug & Play device found
Jan 7 01:57:23 pegasys pty: 256 Unix98 ptys configured
Jan 7 01:57:23 pegasys Toshiba System Managment Mode driver v1.11 26/9/2001
Jan 7 01:57:23 pegasys Real Time Clock Driver v1.12
Jan 7 01:57:23 pegasys Linux agpgart interface v0.100 (c) Dave Jones
Jan 7 01:57:23 pegasys agpgart: Detected an Intel 440BX Chipset.
Jan 7 01:57:23 pegasys agpgart: Maximum main memory to use for agp memory: 262M
Jan 7 01:57:23 pegasys agpgart: AGP aperture is 256M @ 0xd0000000
Jan 7 01:57:23 pegasys [drm] Initialized tdfx 1.0.0 20010216 on minor 0
Jan 7 01:57:23 pegasys [drm] Initialized radeon 1.9.0 20020828 on minor 1
Jan 7 01:57:23 pegasys Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing disabled
Jan 7 01:57:23 pegasys ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
Jan 7 01:57:23 pegasys Using anticipatory io scheduler
Jan 7 01:57:23 pegasys Floppy drive(s): fd0 is 1.44M
Jan 7 01:57:23 pegasys FDC 0 is a post-1991 82077
Jan 7 01:57:23 pegasys Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
Jan 7 01:57:23 pegasys ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
Jan 7 01:57:23 pegasys PIIX4: IDE controller at PCI slot 0000:00:05.1
Jan 7 01:57:23 pegasys PIIX4: chipset revision 1
Jan 7 01:57:23 pegasys PIIX4: not 100% native mode: will probe irqs later
Jan 7 01:57:23 pegasys ide0: BM-DMA at 0xfff0-0xfff7, BIOS settings: hda:DMA, hdb:pio
Jan 7 01:57:23 pegasys ide1: BM-DMA at 0xfff8-0xffff, BIOS settings: hdc:DMA, hdd:pio
Jan 7 01:57:23 pegasys hda: HITACHI_DK23EA-40, ATA DISK drive
Jan 7 01:57:23 pegasys ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Jan 7 01:57:23 pegasys hdc: TOSHIBA DVD-ROM SD-C2402, ATAPI CD/DVD-ROM drive
Jan 7 01:57:23 pegasys ide1 at 0x170-0x177,0x376 on irq 15
Jan 7 01:57:23 pegasys hda: max request size: 128KiB
Jan 7 01:57:23 pegasys hda: 78140160 sectors (40007 MB) w/2048KiB Cache, CHS=65535/16/63, UDMA(33)
Jan 7 01:57:23 pegasys /dev/ide/host0/bus0/target0/lun0: p1 p2 p3
Jan 7 01:57:23 pegasys hdc: ATAPI 24X DVD-ROM drive, 128kB Cache, UDMA(33)
Jan 7 01:57:23 pegasys Uniform CD-ROM driver Revision: 3.12
Jan 7 01:57:23 pegasys mice: PS/2 mouse device common for all mice
Jan 7 01:57:23 pegasys input: ImPS/2 Logitech Wheel Mouse on isa0060/serio1
Jan 7 01:57:23 pegasys serio: i8042 AUX port at 0x60,0x64 irq 12
Jan 7 01:57:23 pegasys input: AT Translated Set 2 keyboard on isa0060/serio0
Jan 7 01:57:23 pegasys serio: i8042 KBD port at 0x60,0x64 irq 1
Jan 7 01:57:23 pegasys NET: Registered protocol family 2
Jan 7 01:57:23 pegasys IP: routing cache hash table of 2048 buckets, 16Kbytes
Jan 7 01:57:23 pegasys TCP: Hash tables configured (established 32768 bind 65536)
Jan 7 01:57:23 pegasys Initializing IPsec netlink socket
Jan 7 01:57:23 pegasys NET: Registered protocol family 1
Jan 7 01:57:23 pegasys NET: Registered protocol family 10
Jan 7 01:57:23 pegasys IPv6 over IPv4 tunneling driver
Jan 7 01:57:23 pegasys NET: Registered protocol family 17
Jan 7 01:57:23 pegasys NET: Registered protocol family 15
Jan 7 01:57:23 pegasys kjournald starting. Commit interval 5 seconds
Jan 7 01:57:23 pegasys EXT3-fs: mounted filesystem with ordered data mode.
Jan 7 01:57:23 pegasys VFS: Mounted root (ext3 filesystem) readonly.
Jan 7 01:57:23 pegasys Freeing unused kernel memory: 148k freed
Jan 7 01:57:23 pegasys Adding 787176k swap on /dev/hda2. Priority:-1 extents:1
Jan 7 01:57:23 pegasys EXT3 FS on hda3, internal journal
Jan 7 01:57:23 pegasys st: Version 20030811, fixed bufsize 32768, s/g segs 256
Jan 7 01:57:23 pegasys PCI: Found IRQ 11 for device 0000:00:0b.0
Jan 7 01:57:23 pegasys PCI: Sharing IRQ 11 with 0000:01:00.0
Jan 7 01:57:23 pegasys Yenta: CardBus bridge found at 0000:00:0b.0 [1179:0001]
Jan 7 01:57:23 pegasys Yenta: ISA IRQ list 04b0, PCI irq11
Jan 7 01:57:23 pegasys Socket status: 30000020
Jan 7 01:57:23 pegasys PCI: Found IRQ 11 for device 0000:00:0b.1
Jan 7 01:57:23 pegasys PCI: Sharing IRQ 11 with 0000:00:0c.0
Jan 7 01:57:23 pegasys Yenta: CardBus bridge found at 0000:00:0b.1 [1179:0001]
Jan 7 01:57:23 pegasys Yenta: ISA IRQ list 04b0, PCI irq11
Jan 7 01:57:23 pegasys Socket status: 30000020
Jan 7 01:57:23 pegasys Linux Tulip driver version 1.1.13 (May 11, 2002)
Jan 7 01:57:23 pegasys drivers/usb/core/usb.c: registered new driver usbfs
Jan 7 01:57:23 pegasys drivers/usb/core/usb.c: registered new driver hub
Jan 7 01:57:23 pegasys spurious 8259A interrupt: IRQ7.
Jan 7 01:57:23 pegasys ohci1394: $Rev: 1045 $ Ben Collins <bcollins@debian.org>
Jan 7 01:57:23 pegasys PCI: Enabling device 0000:02:00.0 (0000 -> 0002)
Jan 7 01:57:23 pegasys PCI: Setting latency timer of device 0000:02:00.0 to 64
Jan 7 01:57:23 pegasys ohci1394_0: OHCI-1394 1.0 (PCI): IRQ=[11] MMIO=[14804000-148047ff] Max Packet=[2048]
Jan 7 01:57:23 pegasys PCI: Enabling device 0000:06:00.0 (0000 -> 0003)
Jan 7 01:57:23 pegasys PCI: Setting latency timer of device 0000:06:00.0 to 64
Jan 7 01:57:23 pegasys eth0: ADMtek Comet rev 17 at 0xd48b0000, 00:10:7A:68:18:5A, IRQ 11.
Jan 7 01:57:23 pegasys PCI: Found IRQ 11 for device 0000:00:0c.0
Jan 7 01:57:23 pegasys PCI: Sharing IRQ 11 with 0000:00:0b.1
Jan 7 01:57:23 pegasys ymfpci: YMF744 at 0xefff8000 IRQ 11
Jan 7 01:57:23 pegasys ac97_codec: AC97 Audio codec, id: AKM2 (Asahi Kasei AK4543)
Jan 7 01:57:23 pegasys PCI: Found IRQ 11 for device 0000:00:09.0
Jan 7 01:57:23 pegasys IrDA: Registered device irda0
Jan 7 01:57:23 pegasys toshoboe: Using multiple tasks, version $Id: donauboe.c V2.18 ven jan 10 03:14:16 2003$
Jan 7 01:57:23 pegasys ieee1394: Node added: ID:BUS[0-00:1023] GUID[0010b90020002233]
Jan 7 01:57:23 pegasys ieee1394: Node added: ID:BUS[0-01:1023] GUID[0010b900200032cc]
Jan 7 01:57:23 pegasys ieee1394: Host added: ID:BUS[0-02:1023] GUID[0001b70100001a89]
Jan 7 01:57:23 pegasys sbp2: $Rev: 1034 $ Ben Collins <bcollins@debian.org>
Jan 7 01:57:23 pegasys scsi0 : SCSI emulation for IEEE-1394 SBP-2 Devices
Jan 7 01:57:23 pegasys ieee1394: sbp2: Logged into SBP-2 device
Jan 7 01:57:23 pegasys ieee1394: sbp2: Node 0-00:1023: Max speed [S400] - Max payload [2048]
Jan 7 01:57:23 pegasys Vendor: Maxtor Model: 1394 storage Rev: 60
Jan 7 01:57:23 pegasys Type: Direct-Access ANSI SCSI revision: 02
Jan 7 01:57:23 pegasys SCSI device sda: 160086528 512-byte hdwr sectors (81964 MB)
Jan 7 01:57:23 pegasys sda: cache data unavailable
Jan 7 01:57:23 pegasys sda: assuming drive cache: write through
Jan 7 01:57:23 pegasys /dev/scsi/host0/bus0/target0/lun0: p1
Jan 7 01:57:23 pegasys Attached scsi disk sda at scsi0, channel 0, id 0, lun 0
Jan 7 01:57:23 pegasys Attached scsi generic sg0 at scsi0, channel 0, id 0, lun 0, type 0
Jan 7 01:57:23 pegasys ieee1394: sbp2: Logged into SBP-2 device
Jan 7 01:57:23 pegasys ieee1394: sbp2: Node 0-01:1023: Max speed [S400] - Max payload [2048]
Jan 7 01:57:23 pegasys Vendor: Maxtor Model: 1394 storage Rev: 60
Jan 7 01:57:23 pegasys Type: Direct-Access ANSI SCSI revision: 02
Jan 7 01:57:23 pegasys SCSI device sdb: 156301488 512-byte hdwr sectors (80026 MB)
Jan 7 01:57:23 pegasys sdb: cache data unavailable
Jan 7 01:57:23 pegasys sdb: assuming drive cache: write through
Jan 7 01:57:23 pegasys /dev/scsi/host0/bus0/target1/lun0: p1
Jan 7 01:57:23 pegasys Attached scsi disk sdb at scsi0, channel 0, id 1, lun 0
Jan 7 01:57:23 pegasys Attached scsi generic sg1 at scsi0, channel 0, id 1, lun 0, type 0
Jan 7 01:57:23 pegasys rc-scripts: ACPI support has not been compiled into the kernel
Jan 7 01:57:27 pegasys eth0: no IPv6 routers present
Jan 7 01:57:28 pegasys sshd[3759]: Server listening on 0.0.0.0 port 22.
Jan 7 01:57:28 pegasys cron[3789]: (CRON) STARTUP (fork ok)
Jan 7 01:57:28 pegasys xinetd[3832]: Reading included configuration file: /etc/xinetd.d/chargen-tcp [file=/etc/xinetd.conf] [line=$
Jan 7 01:57:28 pegasys xinetd[3832]: Reading included configuration file: /etc/xinetd.d/chargen-udp [file=/etc/xinetd.d/chargen-ud$
Jan 7 01:57:28 pegasys xinetd[3832]: Reading included configuration file: /etc/xinetd.d/daytime-tcp [file=/etc/xinetd.d/daytime-tc$
Jan 7 01:57:28 pegasys xinetd[3832]: Reading included configuration file: /etc/xinetd.d/daytime-udp [file=/etc/xinetd.d/daytime-ud$
Jan 7 01:57:28 pegasys xinetd[3832]: Reading included configuration file: /etc/xinetd.d/echo-tcp [file=/etc/xinetd.d/echo-tcp] [li$
Jan 7 01:57:28 pegasys xinetd[3832]: Reading included configuration file: /etc/xinetd.d/echo-udp [file=/etc/xinetd.d/echo-udp] [li$
Jan 7 01:57:28 pegasys xinetd[3832]: Reading included configuration file: /etc/xinetd.d/glftpd [file=/etc/xinetd.d/glftpd] [line=1$
Jan 7 01:57:28 pegasys xinetd[3832]: Reading included configuration file: /etc/xinetd.d/time-tcp [file=/etc/xinetd.d/time-tcp] [li$
Jan 7 01:57:28 pegasys xinetd[3832]: Reading included configuration file: /etc/xinetd.d/time-udp [file=/etc/xinetd.d/time-udp] [li$
Jan 7 01:57:28 pegasys xinetd[3832]: removing chargen
Jan 7 01:57:28 pegasys xinetd[3832]: removing chargen
Jan 7 01:57:28 pegasys xinetd[3832]: removing daytime
Jan 7 01:57:28 pegasys xinetd[3832]: removing daytime
Jan 7 01:57:28 pegasys xinetd[3832]: removing echo
Jan 7 01:57:28 pegasys xinetd[3832]: removing echo
Jan 7 01:57:28 pegasys xinetd[3832]: removing time
Jan 7 01:57:28 pegasys xinetd[3832]: removing time
Jan 7 01:57:29 pegasys xinetd[3832]: xinetd Version 2.3.12 started with libwrap loadavg options compiled in.
Jan 7 01:57:29 pegasys xinetd[3832]: Started working: 1 available service
Back to top
View user's profile Send private message
BonezTheGoon
Bodhisattva
Bodhisattva


Joined: 14 Jun 2002
Posts: 1398
Location: Albuquerque, NM -- birthplace of Microsoft and Gentoo

PostPosted: Wed Jan 07, 2004 3:54 pm    Post subject: Reply with quote

The first thing I would try is to disable APIC in your kernel.

Ok now read that first line again.

See that I said APIC (Advanced Programmable Interupt Controller) which is completely different from ACPI (Advanced Configuration and Power Interface.)

What APIC allows is for more than the default 0-15 IRQ's -- it instead allows 0-31 and then dynamically the Kernel can reassign IRQ addresses when it takes over control of your hardware. Sound interesting??

You can use ACPI without APIC just fine, most people (I would argue) have no need for APIC.

Hope that can help!!!

Regards,
BonezTheGoon
Back to top
View user's profile Send private message
rabidsg
n00b
n00b


Joined: 07 Jan 2004
Posts: 8

PostPosted: Wed Jan 07, 2004 8:11 pm    Post subject: Reply with quote

Thanks I will try that. The only reference to APIC that I found in my config file was CONFIG_X86_GOOD_APIC=y, so I commeted it out and am recompiling it now (couldn't find it within menuconfig), the other APIC was already set to # CONFIG_X86_UP_APIC is not set , which I could see from menuconfig.

once kernel compiled:

was worth a shot, thanks for the reply, but still a no go. Heres the message file now

Quote:

Jan 7 11:11:05 pegasys Linux version 2.6.0 (root@pegasys) (gcc version 3.2.3 20030422 (Gentoo Linux 1.4 3.2.3-r3, propolice)) #1 W$
Jan 7 11:11:05 pegasys BIOS-provided physical RAM map:
Jan 7 11:11:05 pegasys BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
Jan 7 11:11:05 pegasys BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
Jan 7 11:11:05 pegasys BIOS-e820: 00000000000e8000 - 00000000000e8640 (reserved)
Jan 7 11:11:05 pegasys BIOS-e820: 00000000000e8640 - 00000000000e8840 (ACPI NVS)
Jan 7 11:11:05 pegasys BIOS-e820: 00000000000e8840 - 00000000000ec000 (reserved)
Jan 7 11:11:05 pegasys BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
Jan 7 11:11:05 pegasys BIOS-e820: 0000000000100000 - 0000000013fe0000 (usable)
Jan 7 11:11:05 pegasys BIOS-e820: 0000000013fe0000 - 0000000013ff0000 (ACPI data)
Jan 7 11:11:05 pegasys BIOS-e820: 0000000013ff0000 - 0000000014000000 (reserved)
Jan 7 11:11:05 pegasys BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
Jan 7 11:11:05 pegasys 319MB LOWMEM available.
Jan 7 11:11:05 pegasys On node 0 totalpages: 81888
Jan 7 11:11:05 pegasys DMA zone: 4096 pages, LIFO batch:1
Jan 7 11:11:05 pegasys Normal zone: 77792 pages, LIFO batch:16
Jan 7 11:11:05 pegasys HighMem zone: 0 pages, LIFO batch:1
Jan 7 11:11:05 pegasys DMI 2.3 present.
Jan 7 11:11:05 pegasys ACPI: RSDP (v000 TOSHIB ) @ 0x000f0170
Jan 7 11:11:05 pegasys ACPI: RSDT (v001 TOSHIB 750 0x00970814 TASM 0x04010000) @ 0x13fe0000
Jan 7 11:11:05 pegasys ACPI: FADT (v001 TOSHIB 750 0x00970814 TASM 0x04010000) @ 0x13fe0054
Jan 7 11:11:05 pegasys ACPI: DSDT (v001 TOSHIB 4220 0x20000613 MSFT 0x0100000a) @ 0x00000000
Jan 7 11:11:05 pegasys Building zonelist for node : 0
Jan 7 11:11:05 pegasys Kernel command line: root=/dev/hda3 acpi=force
Jan 7 11:11:05 pegasys Initializing CPU#0
Jan 7 11:11:05 pegasys PID hash table entries: 2048 (order 11: 16384 bytes)
Jan 7 11:11:05 pegasys Detected 597.224 MHz processor.
Jan 7 11:11:05 pegasys Console: colour VGA+ 80x25
Jan 7 11:11:05 pegasys Memory: 318736k/327552k available (3034k kernel code, 8028k reserved, 973k data, 148k init, 0k highmem)
Jan 7 11:11:05 pegasys Calibrating delay loop... 1179.64 BogoMIPS
Jan 7 11:11:05 pegasys Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
Jan 7 11:11:05 pegasys Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
Jan 7 11:11:05 pegasys Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
Jan 7 11:11:05 pegasys checking if image is initramfs...it isn't (no cpio magic); looks like an initrd
Jan 7 11:11:05 pegasys Freeing initrd memory: 420k freed
Jan 7 11:11:05 pegasys CPU: After generic identify, caps: 0383f9ff 00000000 00000000 00000000
Jan 7 11:11:05 pegasys CPU: After vendor identify, caps: 0383f9ff 00000000 00000000 00000000
Jan 7 11:11:05 pegasys CPU: L1 I cache: 16K, L1 D cache: 16K
Jan 7 11:11:05 pegasys CPU: L2 cache: 256K
Jan 7 11:11:05 pegasys CPU: After all inits, caps: 0383f9ff 00000000 00000000 00000040
Jan 7 11:11:05 pegasys Intel machine check architecture supported.
Jan 7 11:11:05 pegasys Intel machine check reporting enabled on CPU#0.
Jan 7 11:11:05 pegasys CPU: Intel Pentium III (Coppermine) stepping 03
Jan 7 11:11:05 pegasys Enabling fast FPU save and restore... done.
Jan 7 11:11:05 pegasys Enabling unmasked SIMD FPU exception support... done.
Jan 7 11:11:05 pegasys Checking 'hlt' instruction... OK.
Jan 7 11:11:05 pegasys POSIX conformance testing by UNIFIX
Jan 7 11:11:05 pegasys NET: Registered protocol family 16
Jan 7 11:11:05 pegasys PCI: Using configuration type 1
Jan 7 11:11:05 pegasys mtrr: v2.0 (20020519)
Jan 7 11:11:05 pegasys ACPI: Subsystem revision 20031002
Jan 7 11:11:05 pegasys ACPI-0109: *** Error: No object was returned from [\_SB_.LNKA._STA] (Node d3fde840), AE_NOT_EXIST
Jan 7 11:11:05 pegasys ACPI-0109: *** Error: No object was returned from [\_SB_.LNKB._STA] (Node d3fde940), AE_NOT_EXIST
Jan 7 11:11:05 pegasys ACPI-0109: *** Error: No object was returned from [\_SB_.LNKC._STA] (Node d3f635c0), AE_NOT_EXIST
Jan 7 11:11:05 pegasys ACPI-0109: *** Error: No object was returned from [\_SB_.LNKD._STA] (Node d3f634c0), AE_NOT_EXIST
Jan 7 11:11:05 pegasys ACPI-0109: *** Error: No object was returned from [\_SB_.PCI0.FNC0.FDD_._STA] (Node d3f6fe60), AE_NOT_EXIST
Jan 7 11:11:05 pegasys ACPI-0109: *** Error: No object was returned from [\_SB_.PCI0.FNC0.COM_._STA] (Node d3f6fd20), AE_NOT_EXIST
Jan 7 11:11:05 pegasys ACPI-0109: *** Error: No object was returned from [\_SB_.PCI0.FNC0.PRT_._STA] (Node d3f6fba0), AE_NOT_EXIST
Jan 7 11:11:05 pegasys ACPI-0109: *** Error: No object was returned from [\_SB_.PCI0.FNC0.PRT1._STA] (Node d3f6fac0), AE_NOT_EXIST
Jan 7 11:11:05 pegasys ACPI-0109: *** Error: No object was returned from [\_SB_.PCI0.FNC0.PCC0._STA] (Node d3f6f9c0), AE_NOT_EXIST
Jan 7 11:11:05 pegasys ACPI: Interpreter enabled
Jan 7 11:11:05 pegasys ACPI: Using PIC for interrupt routing
Jan 7 11:11:05 pegasys ACPI-0109: *** Error: No object was returned from [\_SB_.LNKE._PRS] (Node d3f633a0), AE_NOT_EXIST
Jan 7 11:11:05 pegasys ACPI: PCI Root Bridge [PCI0] (00:00)
Jan 7 11:11:05 pegasys PCI: Probing PCI hardware (bus 00)
Jan 7 11:11:05 pegasys ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
Jan 7 11:11:05 pegasys ACPI: Power Resource [PIHD] (on)
Jan 7 11:11:05 pegasys ACPI: Power Resource [PMHD] (on)
Jan 7 11:11:05 pegasys ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT]
Jan 7 11:11:05 pegasys ACPI: Power Resource [PFAN] (off)
Jan 7 11:11:05 pegasys Linux Plug and Play Support v0.97 (c) Adam Belay
Jan 7 11:11:05 pegasys PnPBIOS: Scanning system for PnP BIOS support...
Jan 7 11:11:05 pegasys PnPBIOS: Found PnP BIOS installation structure at 0xc00f9540
Jan 7 11:11:05 pegasys PnPBIOS: PnP BIOS version 1.0, entry 0xf0000:0x9696, dseg 0x0
Jan 7 11:11:05 pegasys PnPBIOS: 15 nodes reported by PnP BIOS; 15 recorded by driver
Jan 7 11:11:05 pegasys SCSI subsystem initialized
Jan 7 11:11:05 pegasys Linux Kernel Card Services
Jan 7 11:11:05 pegasys options: [pci] [cardbus] [pm]
Jan 7 11:11:05 pegasys ACPI: No IRQ known for interrupt pin D of device 0000:00:05.2
Jan 7 11:11:05 pegasys ACPI: No IRQ known for interrupt pin A of device 0000:00:07.0
Jan 7 11:11:05 pegasys ACPI: No IRQ known for interrupt pin A of device 0000:00:09.0
Jan 7 11:11:05 pegasys ACPI: No IRQ known for interrupt pin A of device 0000:00:0b.0 - using IRQ 255
Jan 7 11:11:05 pegasys ACPI: No IRQ known for interrupt pin B of device 0000:00:0b.1 - using IRQ 255
Jan 7 11:11:05 pegasys ACPI: No IRQ known for interrupt pin A of device 0000:00:0c.0
Jan 7 11:11:05 pegasys ACPI: No IRQ known for interrupt pin A of device 0000:01:00.0
Jan 7 11:11:05 pegasys PCI: Using ACPI for IRQ routing
Jan 7 11:11:05 pegasys PCI: if you experience problems, try using option 'pci=noacpi' or even 'acpi=off'
Jan 7 11:11:05 pegasys irda_init()
Jan 7 11:11:05 pegasys NET: Registered protocol family 23
Jan 7 11:11:05 pegasys devfs: v1.22 (20021013) Richard Gooch (rgooch@atnf.csiro.au)
Jan 7 11:11:05 pegasys devfs: boot_options: 0x0
Jan 7 11:11:05 pegasys SGI XFS for Linux with ACLs, realtime, no debug enabled
Jan 7 11:11:05 pegasys SGI XFS Quota Management subsystem
Jan 7 11:11:05 pegasys Initializing Cryptographic API
Jan 7 11:11:05 pegasys Limiting direct PCI/PCI transfers.
Jan 7 11:11:05 pegasys ACPI: AC Adapter [ADP1] (on-line)
Jan 7 11:11:05 pegasys ACPI: Battery Slot [BAT1] (battery absent)
Jan 7 11:11:05 pegasys ACPI: Power Button (FF) [PWRF]
Jan 7 11:11:05 pegasys ACPI: Lid Switch [LID]
Jan 7 11:11:05 pegasys ACPI: Fan [FAN] (off)
Jan 7 11:11:05 pegasys ACPI: Processor [CPU0] (supports C1 C2)
Jan 7 11:11:05 pegasys ACPI: Thermal Zone [THRM] (47 C)
Jan 7 11:11:05 pegasys Toshiba Laptop ACPI Extras version 0.16
Jan 7 11:11:05 pegasys isapnp: Scanning for PnP cards...
Jan 7 11:11:05 pegasys isapnp: No Plug & Play device found
Jan 7 11:11:05 pegasys pty: 256 Unix98 ptys configured
Jan 7 11:11:05 pegasys Toshiba System Managment Mode driver v1.11 26/9/2001
Jan 7 11:11:05 pegasys Real Time Clock Driver v1.12
Jan 7 11:11:05 pegasys Linux agpgart interface v0.100 (c) Dave Jones
Jan 7 11:11:05 pegasys agpgart: Detected an Intel 440BX Chipset.
Jan 7 11:11:05 pegasys agpgart: Maximum main memory to use for agp memory: 262M
Jan 7 11:11:05 pegasys agpgart: AGP aperture is 256M @ 0xd0000000
Jan 7 11:11:05 pegasys [drm] Initialized tdfx 1.0.0 20010216 on minor 0
Jan 7 11:11:05 pegasys [drm] Initialized radeon 1.9.0 20020828 on minor 1
Jan 7 11:11:05 pegasys Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing disabled
Jan 7 11:11:05 pegasys ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
Jan 7 11:11:05 pegasys Using anticipatory io scheduler
Jan 7 11:11:05 pegasys Floppy drive(s): fd0 is 1.44M
Jan 7 11:11:05 pegasys FDC 0 is a post-1991 82077
Jan 7 11:11:05 pegasys Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
Jan 7 11:11:05 pegasys ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
Jan 7 11:11:05 pegasys PIIX4: IDE controller at PCI slot 0000:00:05.1
Jan 7 11:11:05 pegasys PIIX4: chipset revision 1
Jan 7 11:11:05 pegasys PIIX4: not 100% native mode: will probe irqs later
Jan 7 11:11:05 pegasys ide0: BM-DMA at 0xfff0-0xfff7, BIOS settings: hda:DMA, hdb:pio
Jan 7 11:11:05 pegasys ide1: BM-DMA at 0xfff8-0xffff, BIOS settings: hdc:DMA, hdd:pio
Jan 7 11:11:05 pegasys hda: HITACHI_DK23EA-40, ATA DISK drive
Jan 7 11:11:05 pegasys ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Jan 7 11:11:05 pegasys hdc: TOSHIBA DVD-ROM SD-C2402, ATAPI CD/DVD-ROM drive
Jan 7 11:11:05 pegasys ide1 at 0x170-0x177,0x376 on irq 15
Jan 7 11:11:05 pegasys hda: max request size: 128KiB
Jan 7 11:11:05 pegasys hda: 78140160 sectors (40007 MB) w/2048KiB Cache, CHS=65535/16/63, UDMA(33)
Jan 7 11:11:05 pegasys /dev/ide/host0/bus0/target0/lun0: p1 p2 p3
Jan 7 11:11:05 pegasys hdc: ATAPI 24X DVD-ROM drive, 128kB Cache, UDMA(33)
Jan 7 11:11:05 pegasys Uniform CD-ROM driver Revision: 3.12
Jan 7 11:11:05 pegasys mice: PS/2 mouse device common for all mice
Jan 7 11:11:05 pegasys input: ImPS/2 Logitech Wheel Mouse on isa0060/serio1
Jan 7 11:11:05 pegasys serio: i8042 AUX port at 0x60,0x64 irq 12
Jan 7 11:11:05 pegasys input: AT Translated Set 2 keyboard on isa0060/serio0
Jan 7 11:11:05 pegasys serio: i8042 KBD port at 0x60,0x64 irq 1
Jan 7 11:11:05 pegasys NET: Registered protocol family 2
Jan 7 11:11:05 pegasys IP: routing cache hash table of 2048 buckets, 16Kbytes
Jan 7 11:11:05 pegasys TCP: Hash tables configured (established 32768 bind 65536)
Jan 7 11:11:05 pegasys Initializing IPsec netlink socket
Jan 7 11:11:05 pegasys NET: Registered protocol family 1
Jan 7 11:11:05 pegasys NET: Registered protocol family 10
Jan 7 11:11:05 pegasys IPv6 over IPv4 tunneling driver
Jan 7 11:11:05 pegasys NET: Registered protocol family 17
Jan 7 11:11:05 pegasys NET: Registered protocol family 15
Jan 7 11:11:05 pegasys kjournald starting. Commit interval 5 seconds
Jan 7 11:11:05 pegasys EXT3-fs: mounted filesystem with ordered data mode.
Jan 7 11:11:05 pegasys VFS: Mounted root (ext3 filesystem) readonly.
Jan 7 11:11:05 pegasys Freeing unused kernel memory: 148k freed
Jan 7 11:11:05 pegasys Adding 787176k swap on /dev/hda2. Priority:-1 extents:1
Jan 7 11:11:05 pegasys EXT3 FS on hda3, internal journal
Jan 7 11:11:05 pegasys st: Version 20030811, fixed bufsize 32768, s/g segs 256
Jan 7 11:11:05 pegasys PCI: Enabling device 0000:00:0b.0 (0000 -> 0002)
Jan 7 11:11:05 pegasys ACPI: No IRQ known for interrupt pin A of device 0000:00:0b.0 - using IRQ 255
Jan 7 11:11:05 pegasys Yenta: CardBus bridge found at 0000:00:0b.0 [1179:0001]
Jan 7 11:11:05 pegasys Yenta: ISA IRQ list 0cb0, PCI irq0
Jan 7 11:11:05 pegasys Socket status: 30000020
Jan 7 11:11:05 pegasys PCI: Enabling device 0000:00:0b.1 (0000 -> 0002)
Jan 7 11:11:05 pegasys ACPI: No IRQ known for interrupt pin B of device 0000:00:0b.1 - using IRQ 255
Jan 7 11:11:05 pegasys Yenta: CardBus bridge found at 0000:00:0b.1 [1179:0001]
Jan 7 11:11:05 pegasys Yenta: ISA IRQ list 0cb0, PCI irq0
Jan 7 11:11:05 pegasys Socket status: 30000020
Jan 7 11:11:05 pegasys Linux Tulip driver version 1.1.13 (May 11, 2002)
Jan 7 11:11:05 pegasys drivers/usb/core/usb.c: registered new driver usbfs
Jan 7 11:11:05 pegasys drivers/usb/core/usb.c: registered new driver hub
Jan 7 11:11:05 pegasys ohci1394: $Rev: 1045 $ Ben Collins <bcollins@debian.org>
Jan 7 11:11:05 pegasys PCI: Enabling device 0000:02:00.0 (0000 -> 0002)
Jan 7 11:11:05 pegasys ACPI: No IRQ known for interrupt pin A of device 0000:02:00.0
Jan 7 11:11:05 pegasys PCI: Setting latency timer of device 0000:02:00.0 to 64
Jan 7 11:11:05 pegasys ohci1394: Failed to allocate shared interrupt 0
Jan 7 11:11:05 pegasys ohci1394: probe of 0000:02:00.0 failed with error -12
Jan 7 11:11:05 pegasys PCI: Enabling device 0000:06:00.0 (0000 -> 0003)
Jan 7 11:11:05 pegasys ACPI: No IRQ known for interrupt pin A of device 0000:06:00.0
Jan 7 11:11:05 pegasys PCI: Setting latency timer of device 0000:06:00.0 to 64
Jan 7 11:11:05 pegasys eth0: ADMtek Comet rev 17 at 0xd48b7000, 00:10:7A:68:18:5A, IRQ 0.
Jan 7 11:11:05 pegasys ACPI: No IRQ known for interrupt pin A of device 0000:00:0c.0
Jan 7 11:11:05 pegasys ymfpci: YMF744 at 0xefff8000 IRQ 11
Jan 7 11:11:05 pegasys ac97_codec: AC97 Audio codec, id: AKM2 (Asahi Kasei AK4543)
Jan 7 11:11:05 pegasys ACPI: No IRQ known for interrupt pin A of device 0000:00:09.0
Jan 7 11:11:05 pegasys IrDA: Registered device irda0
Jan 7 11:11:05 pegasys toshoboe: Using multiple tasks, version $Id: donauboe.c V2.18 ven jan 10 03:14:16 2003$
Jan 7 11:11:09 pegasys dhcpcd[3570]: dhcpStart: ioctl SIOCSIFFLAGS: Device or resource busy
Jan 7 11:11:09 pegasys rc-scripts: Failed to bring eth0 up
Jan 7 11:11:09 pegasys rc-scripts: ERROR: Problem starting needed services.
Jan 7 11:11:09 pegasys rc-scripts: "netmount" was not started.
Jan 7 11:11:09 pegasys rc-scripts: ERROR: Problem starting needed services.
Jan 7 11:11:09 pegasys rc-scripts: "sshd" was not started.
Jan 7 11:11:10 pegasys cron[3711]: (CRON) STARTUP (fork ok)
Jan 7 11:11:10 pegasys rc-scripts: ERROR: Problem starting needed services.
Jan 7 11:11:10 pegasys rc-scripts: "xinetd" was not started.
Back to top
View user's profile Send private message
rabidsg
n00b
n00b


Joined: 07 Jan 2004
Posts: 8

PostPosted: Wed Jan 07, 2004 10:13 pm    Post subject: Reply with quote

Alright, so apparently i'm either blind or retarded. ACPI is now working on the laptop for the most part, atleast when i issue init 0, it actually shuts power off to the laptop. Apparently, the 4 times i edited grub.conf and put pci=noacpi, i really put pci=noapci each time, fixed it to pci=noacpi and now all works. The only thing I've noticed is that whats in /proc/acpi now is quite scarce, but I guess I can't complain since atleast my goal of gettin the laptop to actually turn off is accomplished.

If anyone has any clues as to how to get the rest of the stuff to show up please feel free to say, I already emereged acpid, so the only difference results in using acpi=force alone and acpi=force with pci=noacpi. Alot more stuff showed up using acpi=force, including a temperature_zone thing, that doesn't show up with pci=noacpi
Back to top
View user's profile Send private message
jay
l33t
l33t


Joined: 08 May 2002
Posts: 980

PostPosted: Fri Jan 09, 2004 7:47 pm    Post subject: Reply with quote

I think this one is what you need now to debug your faulty ACPI code:
https://forums.gentoo.org/viewtopic.php?t=122145&highlight=acpi+aisl

You could also try to recomile the kernel with relaxed AML settings on.
This one is said to help on some Toshiba models.
_________________
Do you want your posessions identified? [ynq] (n)
Back to top
View user's profile Send private message
rabidsg
n00b
n00b


Joined: 07 Jan 2004
Posts: 8

PostPosted: Sat Jan 10, 2004 4:39 am    Post subject: Reply with quote

yup, i took a look at my dsdt file with that intel decompiler, interestingly enough, there were 0 errors, however there were 47 warnings.
Back to top
View user's profile Send private message
Display posts from previous:   
Reply to topic    Gentoo Forums Forum Index Kernel & Hardware All times are GMT
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum