Gentoo Forums

Posted: **Sun Sep 18, 2016 10:36 am**

Salve,

lo so che e' stato ampiamente discusso ma lo stesso non riesco a risolvere,
Ho installato :
sda1+sda2 gentoo+home
sda3 ubuntu16.04
sda4 Win10

Appena accendo con orario nel bios corretto e mi porto nella maschera di login ,l'orologio di lightdm mi segna l'ora corretta.
Effettuato il login mi trovo l'orologio di sistema indietro di 2 ore.

ho correttamente installato opentp ed il mio

Code: Select all

etc/conf.d/hwclock

e' il seguente:

Code: Select all

# Set CLOCK to "UTC" if your Hardware Clock is set to UTC (also known as
# Greenwich Mean Time).  If that clock is set to the local time, then
# set CLOCK to "local".  Note that if you dual boot with Windows, then
# you should set it to "local".
clock="local"

# If you want the hwclock script to set the system time (software clock)
# to match the current hardware clock during bootup, leave this
# commented out.
# However, you can set this to "NO" if you are running a modern kernel
# and using NTP to synchronize your system clock.
clock_hctosys="YES"

# If you do not want to set the hardware clock to the current system
# time (software clock) during shutdown, set this to no.
#clock_systohc="YES"

# If you wish to pass any other arguments to hwclock during bootup,
# you may do so here. Alpha users may wish to use --arc or --srm here.
clock_args=""

Code: Select all

nano /etc/timezone

Europe/Rome

ho aggiunto openntp al runlevel ma non riesco a risolvere.
Suggerimenti?

Posted: **Sun Sep 18, 2016 1:02 pm**

Non so se puo' essere il problema l'opzione:

Code: Select all

# If you want the hwclock script to set the system time (software clock)
# to match the current hardware clock during bootup, leave this
# commented out.
# However, you can set this to "NO" if you are running a modern kernel
# and using NTP to synchronize your system clock.
clock_hctosys="YES"

dovrebbe essere a NO visto che usi NTP

Posted: **Tue Sep 20, 2016 9:54 pm**

non funziona lo stesso...sempre 2 ore indietro

Code: Select all

# Set CLOCK to "UTC" if your Hardware Clock is set to UTC (also known as
# Greenwich Mean Time).  If that clock is set to the local time, then
# set CLOCK to "local".  Note that if you dual boot with Windows, then
# you should set it to "local".
clock="local"

# If you want the hwclock script to set the system time (software clock)
# to match the current hardware clock during bootup, leave this
# commented out.
# However, you can set this to "NO" if you are running a modern kernel
# and using NTP to synchronize your system clock.
#clock_hctosys="NO"

# If you do not want to set the hardware clock to the current system
# time (software clock) during shutdown, set this to no.
#clock_systohc="YES"

# If you wish to pass any other arguments to hwclock during bootup,
# you may do so here. Alpha users may wish to use --arc or --srm here.
clock_args=""

Posted: **Tue Sep 20, 2016 10:00 pm**

Risolto!!!!
Era il plugin dell'orologio che era sballato.
L'ho rimosso e poi riaggiunto alla barra e ha ricominciato a funzionare...incredibile!!!!
grazie

Gentoo Forums

Problema con l'ora[Risolto]

Problema con l'ora[Risolto]