Gentoo Forums

Code: Select all

 * Building fgl_glxgears ...
In file included from /usr/include/GL/glu.h:38:0,
                 from fgl_glxgears.c:64:
/usr/include/GL/gl.h:2055:22: fatal error: GL/glext.h: No such file or directory
 #include <GL/glext.h>
                      ^
compilation terminated.
 * ERROR: x11-drivers/ati-drivers-15.9-r1::gentoo failed (compile phase):
 *   fgl_glxgears build failed
 * 
 * Call stack:
 *     ebuild.sh, line 133:  Called src_compile
 *   environment, line 3739:  Called die
 * The specific snippet of code:
 *       "$(tc-getCC)" -o fgl_glxgears ${CFLAGS} ${LDFLAGS} -DUSE_GLU -I"${S}"/${FOLDER_PREFIX}usr/include fgl_glxgears.c -lGL -lGLU -lX11 
 -lm || die "fgl_glxgears build failed";
 * 
 * If you need support, post the output of `emerge --info 
 '=x11-drivers/ati-drivers-15.9-r1::gentoo'`,
 * the complete build log and the output of `emerge -pqv 
 '=x11-drivers/ati-drivers-15.9-r1::gentoo'`.
 * The complete build log is located at '/var/tmp/portage/x11-drivers/ati-drivers-15.9-r1/temp/build.log'.
 * The ebuild environment file is located at '/var/tmp/portage/x11-drivers/ati-drivers-15.9-r1/temp/environment'.
 * Working directory: 
 '/var/tmp/portage/x11-drivers/ati-drivers-15.9-r1/work/extra/fgl_glxgears'
 * S: '/var/tmp/portage/x11-drivers/ati-drivers-15.9-r1/work'

>>> Failed to emerge x11-drivers/ati-drivers-15.9-r1, Log file:

>>>  '/var/tmp/portage/x11-drivers/ati-drivers-15.9-r1/temp/build.log'

 * Messages for package x11-drivers/ati-drivers-15.9-r1:

 *   CONFIG_DRM must be disabled or compiled as a
 *              module and not loaded for direct rendering to work.
 * Please check to make sure these options are set correctly.
 * Failure to do so may cause unexpected problems.
 *   CONFIG_DRM must be disabled or compiled as a
 *              module and not loaded for direct rendering to work.
 * Please check to make sure these options are set correctly.
 * Failure to do so may cause unexpected problems.

* Messages for package x11-drivers/ati-drivers-15.9-r1:

 * 
 * Please note that this driver only supports graphic cards based on
 * Evergreen chipset and newer.
 * This includes the AMD Radeon HD 5400+ series at this moment.
 * 
 * If your card is older then use x11-drivers/xf86-video-ati
 * For migration informations please refer to:
 * https://www.gentoo.org/proj/en/desktop/x/x11/ati-migration-guide.xml
 * ERROR: x11-drivers/ati-drivers-15.9-r1::gentoo failed (compile phase):
 *   fgl_glxgears build failed
 * 
 * Call stack:
 *     ebuild.sh, line 133:  Called src_compile
 *   environment, line 3739:  Called die
 * The specific snippet of code:
 *       "$(tc-getCC)" -o fgl_glxgears ${CFLAGS} ${LDFLAGS} -DUSE_GLU -I"${S}"/${FOLDER_PREFIX}usr/include fgl_glxgears.c -lGL -lGLU -lX11 
 -lm || die "fgl_glxgears build failed";
 * 
 * If you need support, post the output of `emerge --info 
 '=x11-drivers/ati-drivers-15.9-r1::gentoo'`,
 * the complete build log and the output of `emerge -pqv 
 '=x11-drivers/ati-drivers-15.9-r1::gentoo'`.
 * The complete build log is located at '/var/tmp/portage/x11-drivers/ati-drivers-15.9-r1/temp/build.log'.
 * The ebuild environment file is located at '/var/tmp/portage/x11-drivers/ati-drivers-15.9-r1/temp/environment'.
 * Working directory: 
 '/var/tmp/portage/x11-drivers/ati-drivers-15.9-r1/work/extra/fgl_glxgears'
 * S: '/var/tmp/portage/x11-drivers/ati-drivers-15.9-r1/work'

Code: Select all

Linux Host-001 3.8.13-gentoo #27 SMP Sat Nov 29 23:20:47 CET 2014 x86_64 AMD FX(tm)-8150 Eight-Core Processor AuthenticAMD GNU/Linux

Code: Select all

# emerge -1ua media-libs/mesa

Code: Select all

* Messages for package media-libs/mesa-11.0.6:

 * This package will overwrite one or more files that may belong to other
 * packages (see list below). You can use a command such as `portageq
 * owners / <filename>` to identify the installed package that owns a
 * file. If portageq reports that only one package owns a file then do
 * NOT file a bug report. A bug report is only useful if it identifies at
 * least two or more packages that are known to install the same file(s).
 * If a collision occurs and you can not explain where the file came from
 * then you should simply ignore the collision since there is not enough
 * information to determine if a real problem exists. Please do NOT file
 * a bug report at http://bugs.gentoo.org unless you report exactly which
 * two packages install the same file(s). See
 * http://wiki.gentoo.org/wiki/Knowledge_Base:Blockers for tips on how to
 * solve the problem. And once again, please do NOT file a bug report
 * unless you have completely understood the above message.
 * 
 * Detected file collision(s):
 * 
 *      /usr/include/GL/glxext.h
 *      /usr/include/GL/glext.h
 *      /usr/include/GL/glx.h
 *      /usr/include/GL/gl.h
 *      /usr/include/GLES2/gl2platform.h
 *      /usr/include/GLES2/gl2.h
 *      /usr/include/GLES2/gl2ext.h
 *      /usr/include/KHR/khrplatform.h
 *      /usr/include/EGL/eglextchromium.h
 *      /usr/include/EGL/eglplatform.h
 *      /usr/include/EGL/eglext.h
 *      /usr/include/EGL/eglmesaext.h
 *      /usr/include/EGL/egl.h
 *      /usr/include/GLES3/gl3platform.h
 *      /usr/include/GLES3/gl3ext.h
 *      /usr/include/GLES3/gl3.h
 *      /usr/lib64/libGL.so
 *      /usr/lib64/libEGL.so
 *      /usr/lib64/libEGL.so.1
 *      /usr/lib64/libGL.so.1
 * 
 * Searching all installed packages for file collisions...
 * 
 * Press Ctrl-C to Stop
 * 
 * None of the installed packages claim the file(s).
 * 
 * Package 'media-libs/mesa-11.0.6' merged despite file collisions. If
 * necessary, refer to your elog messages for the whole content of the
 * above message.
 * Note that in order to have full S3TC support, it is necessary to install
 * media-libs/libtxc_dxtn as well. This may be necessary to get nice
 * textures in some apps, and some others even require this to run.
>>> Auto-cleaning packages...

Code: Select all

* To switch to AMD OpenGL, run "eselect opengl set ati"
 * To change your xorg.conf you can use the bundled "aticonfig"
 * 
 * If you experience unexplained segmentation faults and kernel crashes
 * with this driver and multi-threaded applications such as wine,
 * set UseFastTLS in xorg.conf to either 0 or 1, but not 2.
 * 
 * Fully rebooting the system after an ati-drivers update is recommended
 * Stopping Xorg, reloading fglrx kernel module and restart Xorg
 * might not work
 * 
 * Updating module dependencies for 3.8.13-gentoo ...                                                                                                                        [ ok ]
 * Adding module to moduledb.
Switching to ati OpenGL interface... done
Switching to amd OpenCL interface... done
>>> x11-drivers/ati-drivers-15.9-r1 merged.
>>> Regenerating /etc/ld.so.cache...