Page 23 of 25

Posted: Fri Jan 01, 2010 6:56 pm
by warrens
Just did major surgery on my old P4 3.2GHz. Replaced Intel motherboard with BioStar TA390GX A3+ w/ 4GB RAM, AMD Phenom II X4 945 (3.0GHZ OC'ed to 3.2GHx). Replace old NVidia 5990Ultra with NVidia GT 220. Kept my old Audigy2 soundcard and my original case.

Now gcc takes less than 15 minutes to compile and openoffice less than an hour. :D

Code: Select all

processor       : 0                    
vendor_id       : AuthenticAMD         
cpu family      : 16                   
model           : 4                    
model name      : AMD Phenom(tm) II X4 945 Processor
stepping        : 2                                 
cpu MHz         : 3224.967                          
cache size      : 512 KB                            
physical id     : 0                                 
siblings        : 4                                 
core id         : 0                                 
cpu cores       : 4                                 
apicid          : 0                                 
initial apicid  : 0                                 
fpu             : yes                               
fpu_exception   : yes                               
cpuid level     : 5                                 
wp              : yes                               
flags           : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush mmx fxsr sse sse2 ht syscall nx mmxext fxsr_opt pdpe1gb rdtscp lm 3dnowext 3dnow constant_tsc rep_good nonstop_tsc extd_apicid pni monitor cx16 popcnt lahf_lm cmp_legacy svm extapic cr8_legacy abm sse4a misalignsse 3dnowprefetch osvw ibs skinit wdt                    
bogomips        : 6449.92                                    
TLB size        : 1024 4K pages                              
clflush size    : 64                                         
cache_alignment : 64                                         
address sizes   : 48 bits physical, 48 bits virtual          
power management: ts ttp tm stc 100mhzsteps hwpstate         

processor       : 1
vendor_id       : AuthenticAMD
cpu family      : 16          
model           : 4           
model name      : AMD Phenom(tm) II X4 945 Processor
stepping        : 2                                 
cpu MHz         : 3224.967                          
cache size      : 512 KB                            
physical id     : 0                                 
siblings        : 4                                 
core id         : 1                                 
cpu cores       : 4                                 
apicid          : 1                                 
initial apicid  : 1                                 
fpu             : yes                               
fpu_exception   : yes                               
cpuid level     : 5                                 
wp              : yes                               
flags           : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush mmx fxsr sse sse2 ht syscall nx mmxext fxsr_opt pdpe1gb rdtscp lm 3dnowext 3dnow constant_tsc rep_good nonstop_tsc extd_apicid pni monitor cx16 popcnt lahf_lm cmp_legacy svm extapic cr8_legacy abm sse4a misalignsse 3dnowprefetch osvw ibs skinit wdt                    
bogomips        : 6450.19                                    
TLB size        : 1024 4K pages                              
clflush size    : 64                                         
cache_alignment : 64                                         
address sizes   : 48 bits physical, 48 bits virtual          
power management: ts ttp tm stc 100mhzsteps hwpstate         

processor       : 2
vendor_id       : AuthenticAMD
cpu family      : 16          
model           : 4           
model name      : AMD Phenom(tm) II X4 945 Processor
stepping        : 2                                 
cpu MHz         : 3224.967                          
cache size      : 512 KB                            
physical id     : 0                                 
siblings        : 4                                 
core id         : 2                                 
cpu cores       : 4                                 
apicid          : 2                                 
initial apicid  : 2                                 
fpu             : yes                               
fpu_exception   : yes                               
cpuid level     : 5                                 
wp              : yes                               
flags           : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush mmx fxsr sse sse2 ht syscall nx mmxext fxsr_opt pdpe1gb rdtscp lm 3dnowext 3dnow constant_tsc rep_good nonstop_tsc extd_apicid pni monitor cx16 popcnt lahf_lm cmp_legacy svm extapic cr8_legacy abm sse4a misalignsse 3dnowprefetch osvw ibs skinit wdt                    
bogomips        : 6450.19                                    
TLB size        : 1024 4K pages                              
clflush size    : 64                                         
cache_alignment : 64                                         
address sizes   : 48 bits physical, 48 bits virtual          
power management: ts ttp tm stc 100mhzsteps hwpstate         

processor       : 3
vendor_id       : AuthenticAMD
cpu family      : 16          
model           : 4           
model name      : AMD Phenom(tm) II X4 945 Processor
stepping        : 2                                 
cpu MHz         : 3224.967                          
cache size      : 512 KB                            
physical id     : 0                                 
siblings        : 4                                 
core id         : 3                                 
cpu cores       : 4                                 
apicid          : 3                                 
initial apicid  : 3                                 
fpu             : yes                               
fpu_exception   : yes                               
cpuid level     : 5                                 
wp              : yes
flags           : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush mmx fxsr sse sse2 ht syscall nx mmxext fxsr_opt pdpe1gb rdtscp lm 3dnowext 3dnow constant_tsc rep_good nonstop_tsc extd_apicid pni monitor cx16 popcnt lahf_lm cmp_legacy svm extapic cr8_legacy abm sse4a misalignsse 3dnowprefetch osvw ibs skinit wdt
bogomips        : 6450.19
TLB size        : 1024 4K pages
clflush size    : 64
cache_alignment : 64
address sizes   : 48 bits physical, 48 bits virtual
power management: ts ttp tm stc 100mhzsteps hwpstate

Posted: Sat Jan 02, 2010 5:06 am
by d2_racing
Can you post this after your completed your toolchain :

Code: Select all

# emerge -ep system | genlop -p

Posted: Sat Jan 02, 2010 5:23 am
by warrens

Code: Select all

emerge -ep system | genlop -p
These are the pretended packages: (this may take a while; wait...)                                                        

[ebuild   R   ] sys-apps/portage-2.2_rc61 
[ebuild   R   ] virtual/libintl-0         
[ebuild   R   ] sys-libs/zlib-1.2.3-r1    
[ebuild   R   ] sys-devel/gnuconfig-20090819 
[ebuild   R   ] dev-libs/expat-2.0.1-r2      
[ebuild   R   ] dev-libs/gmp-4.3.1           
[ebuild   R   ] virtual/libiconv-0           
[ebuild   R   ] app-misc/pax-utils-0.1.19    
[ebuild   R   ] sys-devel/gcc-config-1.4.1   
[ebuild   R   ] app-portage/portage-utils-0.2.1 
[ebuild   R   ] sys-devel/automake-wrapper-4    
[ebuild   R   ] app-arch/bzip2-1.0.5-r1         
[ebuild   R   ] app-misc/mime-types-8           
[ebuild   R   ] app-admin/python-updater-0.7    
[ebuild   R   ] sys-devel/autoconf-wrapper-8    
[ebuild   R   ] sys-apps/tcp-wrappers-7.6-r8    
[ebuild   R   ] sys-libs/timezone-data-2009t    
[ebuild   R   ] dev-libs/oniguruma-5.9.1        
[ebuild   R   ] sys-devel/patch-2.5.9-r1        
[ebuild   R   ] app-arch/cpio-2.10              
[ebuild   R   ] sys-apps/which-2.20             
[ebuild   R   ] dev-util/pkgconfig-0.23         
[ebuild   R   ] app-arch/xz-utils-4.999.9_beta  
[ebuild   R   ] media-sound/alsa-headers-1.0.21 
[ebuild   R   ] sys-devel/m4-1.4.13             
[ebuild   R   ] sys-kernel/linux-headers-2.6.30-r1 
[ebuild   R   ] sys-apps/sandbox-2.2               
[ebuild   R   ] dev-libs/mpfr-2.4.2_p1             
[ebuild   R   ] dev-java/java-config-wrapper-0.16  
[ebuild   R   ] media-libs/libpng-1.2.41           
[ebuild   R   ] sys-apps/sysvinit-2.87-r1          
[ebuild   R   ] net-misc/iputils-20071127-r2       
[ebuild   R   ] virtual/init-0                     
[ebuild   R   ] sys-apps/baselayout-2.0.1          
[ebuild   R   ] sys-apps/module-init-tools-3.11.1  
[ebuild   R   ] sys-apps/debianutils-3.2.2         
[ebuild   R   ] sys-auth/pambase-20090620.1-r1     
[ebuild   R   ] virtual/acl-0                      
[ebuild   R   ] virtual/jdk-1.6.0                  
[ebuild   R   ] virtual/jre-1.6.0                  
[ebuild   R   ] app-admin/eselect-vi-1.1.6         
[ebuild   R   ] sys-devel/binutils-config-2        
[ebuild   R   ] sys-apps/man-pages-posix-2003a     
[ebuild   R   ] app-i18n/man-pages-zh_CN-1.5       
[ebuild   R   ] app-i18n/man-pages-ja-20070515     
[ebuild   R   ] app-admin/gamin-0.1.10             
[ebuild   R   ] app-admin/eselect-ctags-1.13       
[ebuild   R   ] dev-util/ctags-5.8                 
[ebuild   R   ] virtual/libffi-0                   
[ebuild   R   ] app-admin/eselect-fontconfig-1.1   
[ebuild   R   ] sys-devel/autoconf-2.65            
[ebuild   R   ] sys-devel/automake-1.10.3          
[ebuild   R   ] sys-devel/libtool-2.2.6b           
[ebuild   R   ] dev-lang/tcl-8.5.7                 
[ebuild   R   ] dev-libs/libffi-3.0.8              
[ebuild   R   ] x11-misc/util-macros-1.4.1         
[ebuild   R   ] sys-devel/gettext-0.17             
[ebuild   R   ] sys-apps/sed-4.2.1                 
[ebuild   R   ] sys-devel/flex-2.5.35              
[ebuild   R   ] dev-libs/glib-2.22.3               
[ebuild   R   ] sys-apps/findutils-4.5.5           
[ebuild   R   ] sys-devel/make-3.81                
[ebuild   R   ] sys-apps/diffutils-2.8.7-r2        
[ebuild   R   ] sys-apps/attr-2.4.43               
[ebuild   R   ] dev-libs/popt-1.15                 
[ebuild   R   ] app-arch/gzip-1.3.14               
[ebuild   R   ] sys-apps/kbd-1.15.1                
[ebuild   R   ] sys-apps/net-tools-1.60_p20090728014017-r1 
[ebuild   R   ] sys-apps/gawk-3.1.7                        
[ebuild   R   ] app-arch/tar-1.22                          
[ebuild   R   ] dev-libs/libgpg-error-1.7                  
[ebuild   R   ] sys-devel/binutils-2.20                    
[ebuild   R   ] sys-apps/acl-2.2.47-r1                     
[ebuild   R   ] dev-libs/libpcre-8.00                      
[ebuild   R   ] sys-devel/bison-2.4.1                      
[ebuild   R   ] net-misc/rsync-3.0.6                       
[ebuild   R   ] dev-libs/libgcrypt-1.4.5                   
[ebuild   R   ] x11-proto/xproto-7.0.16                    
[ebuild   R   ] x11-proto/xextproto-7.1.1                  
[ebuild   R   ] x11-libs/xtrans-1.2.5                      
[ebuild   R   ] x11-proto/inputproto-2.0                   
[ebuild   R   ] x11-proto/kbproto-1.0.4                    
[ebuild   R   ] dev-libs/libpthread-stubs-0.1              
[ebuild   R   ] x11-proto/recordproto-1.14                 
[ebuild   R   ] x11-proto/printproto-1.0.4                 
[ebuild   R   ] sys-apps/grep-2.5.4-r1                     
[ebuild   R   ] x11-proto/renderproto-0.11                 
[ebuild   R   ] x11-proto/xf86bigfontproto-1.2.0           
[ebuild   R   ] x11-libs/libXau-1.0.5                      
[ebuild   R   ] x11-libs/libXdmcp-1.0.3                    
[ebuild   R   ] x11-libs/libICE-1.0.6                      
[ebuild   R   ] sys-apps/man-1.6f-r3                       
[ebuild   R   ] sys-apps/man-pages-3.23                    
[ebuild   R   ] sys-kernel/gentoo-sources-2.6.32           
[ebuild   R   ] sys-libs/ncurses-5.7-r3                    
[ebuild   R   ] app-shells/bash-4.0_p35                    
[ebuild   R   ] sys-apps/texinfo-4.13                      
[ebuild   R   ] sys-apps/coreutils-8.2                     
[ebuild   R   ] sys-libs/gpm-1.20.6                        
[ebuild   R   ] app-editors/nano-2.2.1                     
[ebuild   R   ] sys-apps/less-436                          
[ebuild   R   ] sys-process/psmisc-22.7                    
[ebuild   R   ] sys-process/procps-3.2.8                   
[ebuild   R   ] sys-libs/readline-6.0_p4                   
[ebuild   R   ] virtual/editor-0                           
[ebuild   R   ] virtual/pager-0                            
[ebuild   R   ] dev-db/sqlite-3.6.21                       
[ebuild   R   ] sys-libs/slang-2.2.2                       
[ebuild   R   ] sys-devel/bc-1.06.95                       
[ebuild   R   ] app-admin/eselect-1.2.8                    
[ebuild   R   ] app-admin/eselect-python-20090824          
[ebuild   R   ] app-editors/vim-core-7.2.303               
[ebuild   R   ] app-misc/ca-certificates-20090709          
[ebuild   R   ] app-admin/perl-cleaner-1.05                
[ebuild   R   ] sys-libs/e2fsprogs-libs-1.41.9             
[ebuild   R   ] x11-libs/libX11-1.3.2                      
[ebuild   R   ] x11-libs/libXext-1.1.1                     
[ebuild   R   ] media-libs/freetype-2.3.11                 
[ebuild   R   ] x11-libs/libXrender-0.9.5                  
[ebuild   R   ] x11-libs/libXi-1.3                         
[ebuild   R   ] x11-libs/libXp-1.0.0                       
[ebuild   R   ] media-libs/fontconfig-2.8.0                
[ebuild   R   ] x11-libs/libXtst-1.1.0                     
[ebuild   R   ] x11-libs/libXft-2.1.14                     
[ebuild   R   ] dev-lang/python-2.6.4                      
[ebuild   R   ] dev-libs/libxml2-2.7.6                     
[ebuild   R   ] dev-java/java-config-2.1.10                
[ebuild   R   ] sys-libs/cracklib-2.8.15                   
[ebuild   R   ] dev-libs/libgamin-0.1.10-r2                
[ebuild   R   ] sys-apps/file-5.03                         
[ebuild   R   ] media-libs/alsa-lib-1.0.21a                
[ebuild   R   ] sys-libs/db-4.8.24                         
[ebuild   R   ] app-admin/gam-server-0.1.10                
[ebuild   R   ] sys-libs/db-4.7.25_p4                      
[ebuild   R   ] dev-libs/libxslt-1.1.26                    
[ebuild   R   ] x11-proto/xcb-proto-1.6                    
[ebuild   R   ] sys-libs/gdbm-1.8.3-r4                     
[ebuild   R   ] x11-libs/libxcb-1.5                        
[ebuild   R   ] sys-devel/libperl-5.8.8-r2                 
[ebuild   R   ] dev-lang/perl-5.8.8-r8                     
[ebuild   R   ] dev-libs/openssl-0.9.8l-r2                 
[ebuild   R   ] sys-apps/util-linux-2.16.2                 
[ebuild   R   ] app-editors/vim-7.2.303                    
[ebuild   R   ] dev-perl/Locale-gettext-1.05-r1            
[ebuild   R   ] x11-libs/libSM-1.1.1                       
[ebuild   R   ] app-vim/pam-syntax-20060424                
[ebuild   R   ] app-vim/gentoo-syntax-20090720             
[ebuild   R   ] sys-fs/e2fsprogs-1.41.9                    
[ebuild   R   ] net-misc/wget-1.12                         
[ebuild   R   ] sys-apps/help2man-1.36.4-r1                
[ebuild   R   ] x11-libs/libXt-1.0.7-r1                    
[ebuild   R   ] sys-devel/automake-1.11.1                  
[ebuild   R   ] x11-libs/libXmu-1.0.5                      
[ebuild   R   ] dev-lang/tk-8.5.7-r1                       
[ebuild   R   ] sys-apps/dbus-1.2.12                       
[ebuild   R   ] x11-libs/libXpm-3.5.8                      
[ebuild   R   ] x11-apps/xauth-1.0.4                       
[ebuild   R   ] dev-libs/dbus-glib-0.82                    
[ebuild   R   ] x11-libs/libXaw-1.0.7                      
[ebuild   R   ] sys-apps/groff-1.20.1-r2                   
[ebuild   R   ] sys-libs/glibc-2.11-r1
[ebuild   R   ] sys-libs/pam-1.1.1
[ebuild   R   ] sys-fs/udev-149
[ebuild   R   ] sys-devel/gcc-4.4.2
[ebuild   R   ] dev-java/sun-jdk-1.6.0.17
[ebuild   R   ] sys-apps/shadow-4.1.4.2-r1
[ebuild   R   ] sys-auth/consolekit-0.4.1
[ebuild   R   ] sys-apps/openrc-0.6.0
[ebuild   R   ] sys-apps/busybox-1.15.3
[ebuild   R   ] net-misc/openssh-5.3_p1-r1


Estimated update time: 1 hour, 16 minutes.
I know that a Core I7 would beat this, but not by much. :D

Posted: Sat Jan 02, 2010 5:28 am
by d2_racing
I saw a CoreI7 under 57 minutes :P

Posted: Sat Jan 02, 2010 6:05 am
by warrens
Well, 1 hour, 16 minutes still beats the 4 hours+ for my old P4c 3.2GHz. :lol:

Posted: Sat Jan 02, 2010 9:40 pm
by Quick23t
CoreI7 920 with mild overlclock.

Code: Select all

cp@CPX58 ~ $ emerge -ep system | genlop -p 
These are the pretended packages: (this may take a while; wait...)

[ebuild   R   ] sys-apps/portage-2.2_rc61 
[ebuild   R   ] virtual/libintl-0 
[ebuild   R   ] sys-libs/zlib-1.2.3-r1 
[ebuild   R   ] sys-devel/gnuconfig-20090819 
[ebuild   R   ] virtual/libiconv-0 
[ebuild   R   ] app-misc/pax-utils-0.1.19 
[ebuild   R   ] app-arch/bzip2-1.0.5-r1 
[ebuild   R   ] dev-libs/gmp-4.3.1 
[ebuild   R   ] dev-libs/expat-2.0.1-r2 
[ebuild   R   ] sys-devel/automake-wrapper-4 
[ebuild   R   ] sys-devel/autoconf-wrapper-8 
[ebuild   R   ] sys-apps/tcp-wrappers-7.6-r8 
[ebuild   R   ] app-misc/mime-types-8 
[ebuild   R   ] app-admin/python-updater-0.7 
[ebuild   R   ] sys-libs/timezone-data-2009u 
[ebuild   R   ] dev-libs/libffi-3.0.9 
[ebuild   R   ] sys-devel/patch-2.5.9-r1 
[ebuild   R   ] app-arch/cpio-2.10 
[ebuild   R   ] net-dns/openresolv-3.3.2 
[ebuild   R   ] sys-apps/which-2.20 
[ebuild   R   ] sys-apps/funtoo-netscripts-1.1 
[ebuild   R   ] dev-util/pkgconfig-0.23 
[ebuild   R   ] app-arch/xz-utils-4.999.9_beta 
[ebuild   R   ] dev-util/gperf-3.0.4 
[ebuild   R   ] app-portage/portage-utils-0.2.1 
[ebuild   R   ] sys-devel/m4-1.4.13 
[ebuild   R   ] sys-kernel/linux-headers-2.6.29 
[ebuild   R   ] sys-apps/sandbox-2.2 
[ebuild   R   ] dev-libs/mpfr-2.4.2_p1 
[ebuild   R   ] sys-apps/pciutils-3.1.4 
[ebuild   R   ] virtual/libffi-0 
[ebuild   R   ] sys-apps/net-tools-1.60_p20100101055920 
[ebuild   R   ] sys-apps/sysvinit-2.87-r1 
[ebuild   R   ] net-misc/iputils-20071127-r2 
[ebuild   R   ] virtual/init-0 
[ebuild   R   ] sys-apps/baselayout-2.1.6 
[ebuild   R   ] sys-apps/module-init-tools-3.11.1 
[ebuild   R   ] sys-apps/debianutils-3.2.2 
[ebuild   R   ] sys-devel/libperl-5.10.1-r11 
[ebuild   R   ] sys-auth/pambase-20090620.1-r1 
[ebuild   R   ] virtual/acl-0 
[ebuild   R   ] sys-devel/gcc-config-1.4.1 
[ebuild   R   ] virtual/libusb-0 
[ebuild   R   ] sys-apps/usbutils-0.86-r1 
[ebuild   R   ] sys-devel/binutils-config-2 
[ebuild   R   ] sys-apps/man-pages-posix-2003a 
[ebuild   R   ] sys-devel/autoconf-2.65 
[ebuild   R   ] sys-devel/automake-1.10.3 
[ebuild   R   ] sys-devel/libtool-2.2.6b 
[ebuild   R   ] dev-libs/libusb-0.1.12-r6 
[ebuild   R   ] x11-misc/util-macros-1.4.1 
[ebuild   R   ] sys-devel/gettext-0.17 
[ebuild   R   ] sys-devel/flex-2.5.35 
[ebuild   R   ] sys-apps/sed-4.2.1 
[ebuild   R   ] sys-apps/findutils-4.5.5 
[ebuild   R   ] sys-devel/make-3.81 
[ebuild   R   ] sys-apps/diffutils-2.8.7-r2 
[ebuild   R   ] dev-libs/glib-2.22.3 
[ebuild   R   ] sys-apps/attr-2.4.43
[ebuild   R   ] dev-libs/popt-1.15 
[ebuild   R   ] app-arch/gzip-1.3.14 
[ebuild   R   ] sys-apps/kbd-1.15.1 
[ebuild   R   ] sys-apps/gawk-3.1.7 
[ebuild   R   ] app-arch/tar-1.22 
[ebuild   R   ] dev-libs/libgpg-error-1.7 
[ebuild   R   ] sys-devel/binutils-2.19.1-r1 
[ebuild   R   ] sys-apps/acl-2.2.47-r1 
[ebuild   R   ] sys-devel/bison-2.4.1 
[ebuild   R   ] net-misc/rsync-3.0.6 
[ebuild   R   ] dev-libs/libpcre-8.00 
[ebuild   R   ] dev-libs/libgcrypt-1.4.5 
[ebuild   R   ] x11-proto/xproto-7.0.16 
[ebuild   R   ] sys-libs/db-4.8.24 
[ebuild   R   ] x11-proto/xextproto-7.1.1 
[ebuild   R   ] x11-libs/xtrans-1.2.5 
[ebuild   R   ] x11-proto/kbproto-1.0.4 
[ebuild   R   ] dev-libs/libpthread-stubs-0.1 
[ebuild   R   ] sys-libs/db-4.7.25_p4 
[ebuild   R   ] sys-apps/grep-2.5.4-r1 
[ebuild   R   ] x11-proto/xf86bigfontproto-1.2.0 
[ebuild   R   ] x11-proto/inputproto-2.0 
[ebuild   R   ] x11-libs/libXau-1.0.5 
[ebuild   R   ] x11-libs/libICE-1.0.6 
[ebuild   R   ] sys-libs/gdbm-1.8.3-r4 
[ebuild   R   ] x11-libs/libXdmcp-1.0.3 
[ebuild   R   ] dev-lang/perl-5.10.1-r12 
[ebuild   R   ] dev-perl/Locale-gettext-1.05-r1 
[ebuild   R   ] sys-apps/help2man-1.36.4-r1 
[ebuild   R   ] dev-libs/openssl-0.9.8l-r2 
[ebuild   R   ] net-misc/wget-1.12 
[ebuild   R   ] sys-kernel/zen-sources-2.6.32_p3 
[ebuild   R   ] sys-fs/udev-146-r2 
[ebuild   R   ] sys-libs/ncurses-5.7-r3 
[ebuild   R   ] sys-apps/texinfo-4.13 
[ebuild   R   ] app-shells/bash-4.0_p35 
[ebuild   R   ] sys-apps/coreutils-8.2 
[ebuild   R   ] sys-apps/util-linux-2.16.2 
[ebuild   R   ] app-editors/nano-2.2.1 
[ebuild   R   ] sys-apps/less-436 
[ebuild   R   ] sys-process/procps-3.2.8 
[ebuild   R   ] sys-process/psmisc-22.7 
[ebuild   R   ] sys-libs/gpm-1.20.6 
[ebuild   R   ] sys-libs/readline-6.0_p3 
[ebuild   R   ] x11-libs/libSM-1.1.1 
[ebuild   R   ] sys-devel/automake-1.11.1 
[ebuild   R   ] app-misc/ca-certificates-20090709 
[ebuild   R   ] app-admin/perl-cleaner-2_pre091219 
[ebuild   R   ] virtual/editor-0 
[ebuild   R   ] virtual/pager-0 
[ebuild   R   ] sys-devel/bc-1.06.95 
[ebuild   R   ] app-admin/eselect-1.2.9 
[ebuild   R   ] app-admin/eselect-vi-1.1.6 
[ebuild   R   ] sys-libs/e2fsprogs-libs-1.41.9 
[ebuild   R   ] sys-fs/e2fsprogs-1.41.9 
[ebuild   R   ] dev-lang/python-2.6.4 
[ebuild   R   ] dev-libs/libxml2-2.7.6 
[ebuild   R   ] sys-libs/cracklib-2.8.15 
[ebuild   R   ] sys-apps/file-5.03 
[ebuild   R   ] dev-libs/libxslt-1.1.26 
[ebuild   R   ] x11-proto/xcb-proto-1.6 
[ebuild   R   ] x11-libs/libxcb-1.5 
[ebuild   R   ] x11-libs/libX11-1.3.2 
[ebuild   R   ] x11-libs/libXt-1.0.7-r1 
[ebuild   R   ] x11-libs/libXext-1.1.1 
[ebuild   R   ] x11-libs/libXmu-1.0.5 
[ebuild   R   ] x11-libs/libXpm-3.5.8 
[ebuild   R   ] x11-apps/xauth-1.0.4 
[ebuild   R   ] x11-libs/libXaw-1.0.7 
[ebuild   R   ] sys-apps/groff-1.20.1-r2 
[ebuild   R   ] sys-libs/glibc-2.9_p20081201-r2 
[ebuild   R   ] sys-libs/pam-1.1.1 
[ebuild   R   ] sys-devel/gcc-4.3.3-r2 
[ebuild   R   ] sys-apps/iproute2-2.6.31 
[ebuild   R   ] sys-apps/openrc-0.6.0
[ebuild   R   ] sys-apps/shadow-4.1.4.2-r1 
[ebuild   R   ] app-admin/eselect-python-20091230 
[ebuild   R   ] sys-apps/busybox-1.13.4 
[ebuild   R   ] sys-apps/man-1.6f-r3 
[ebuild   R   ] net-misc/openssh-5.3_p1-r1 
[ebuild   R   ] sys-apps/man-pages-3.23 


Estimated update time: 52 minutes. 

Posted: Sat Jan 02, 2010 10:07 pm
by d2_racing
Ouch Quick23t, it's pretty fast :P

Posted: Sun Jan 03, 2010 12:37 am
by Quick23t
Sure beats the days of compiling on a P2..

Posted: Sun Jan 03, 2010 2:15 am
by d2_racing
On a P1 :P

Posted: Sun Jan 03, 2010 11:43 am
by regomodo
Quick23t wrote:Sure beats the days of compiling on a P2..
I was doing that until just over a week ago.

Posted: Sun Jan 03, 2010 12:45 pm
by durian

Code: Select all

vondel ~ # emerge -ep system | genlop -p 
These are the pretended packages: (this may take a while; wait...)

[ebuild   R   ] sys-apps/portage-2.1.6.13 
[ebuild   R   ] virtual/libintl-0 
[ebuild   R   ] sys-libs/zlib-1.2.3-r1 
[ebuild   R   ] sys-devel/gnuconfig-20090203 
[ebuild   R   ] virtual/libiconv-0 
[ebuild   R   ] app-misc/pax-utils-0.1.19 
[ebuild   R   ] app-arch/bzip2-1.0.5-r1 
[ebuild   R   ] dev-libs/gmp-4.3.1 
[ebuild   R   ] sys-devel/gcc-config-1.4.1 
[ebuild   R   ] dev-libs/expat-2.0.1-r2 
[ebuild   R   ] sys-apps/tcp-wrappers-7.6-r8 
[ebuild   R   ] app-misc/mime-types-8 
[ebuild   R   ] app-admin/python-updater-0.7 
[ebuild   R   ] sys-devel/autoconf-wrapper-7 
[ebuild   R   ] dev-db/mysql-init-scripts-1.2 
[ebuild   R   ] sys-devel/automake-wrapper-3-r1 
[ebuild     U ] sys-libs/timezone-data-2009s [2009p]
[ebuild   R   ] sys-devel/patch-2.5.9 
[ebuild   R   ] app-arch/cpio-2.9-r2 
[ebuild   R   ] sys-apps/which-2.20 
[ebuild   R   ] app-arch/lzma-utils-4.32.7 
[ebuild   R   ] dev-util/pkgconfig-0.23 
[ebuild   R   ] app-portage/portage-utils-0.2.1 
[ebuild   R   ] sys-kernel/linux-headers-2.6.27-r2 
[ebuild   R   ] sys-devel/m4-1.4.12 
[ebuild   R   ] sys-apps/sandbox-1.6-r2 
[ebuild     U ] dev-libs/mpfr-2.4.1_p5 [2.4.1_p1]
[ebuild   R   ] sys-apps/sysvinit-2.86-r10 
[ebuild   R   ] net-misc/iputils-20071127 
[ebuild   R   ] virtual/init-0 
[ebuild   R   ] sys-apps/debianutils-3.1.3 
[ebuild   R   ] virtual/acl-0 
[ebuild   R   ] sys-auth/pambase-20090620.1-r1 
[ebuild   R   ] virtual/mysql-5.0 
[ebuild   R   ] sys-apps/baselayout-1.12.13 
[ebuild   R   ] sys-process/procps-3.2.8 
[ebuild   R   ] virtual/libffi-0 
[ebuild   R   ] virtual/postgresql-base-8.1 
[ebuild   R   ] virtual/perl-Sys-Syslog-0.27 
[ebuild   R   ] virtual/perl-File-Spec-3.30 
[ebuild   R   ] virtual/perl-Storable-2.20 
[ebuild   R   ] sys-devel/binutils-config-1.9-r4 
[ebuild   R   ] sys-apps/man-pages-posix-2003a 
[ebuild   R   ] virtual/perl-Module-Build-0.34.0201 
[ebuild   R   ] virtual/perl-ExtUtils-CBuilder-0.26.03 
[ebuild   R   ] virtual/perl-IO-Compress-2.021 
[ebuild   R   ] virtual/perl-Archive-Tar-1.54 
[ebuild   R   ] virtual/perl-Test-Harness-3.17 
[ebuild   R   ] virtual/perl-ExtUtils-ParseXS-2.20.0401 
[ebuild   R   ] virtual/perl-IO-Zlib-1.09 
[ebuild   R   ] virtual/perl-Package-Constants-0.02 
[ebuild   R   ] virtual/perl-Scalar-List-Utils-1.21 
[ebuild   R   ] virtual/perl-Compress-Raw-Bzip2-2.021 
[ebuild   R   ] virtual/perl-Compress-Raw-Zlib-2.021 
[ebuild   R   ] sys-devel/gettext-0.17 
[ebuild   R   ] sys-devel/flex-2.5.35 
[ebuild   R   ] sys-apps/findutils-4.4.0 
[ebuild   R   ] sys-devel/bison-2.3 
[ebuild   R   ] sys-devel/make-3.81 
[ebuild   R   ] sys-apps/diffutils-2.8.7-r2 
[ebuild     U ] dev-libs/popt-1.15 [1.14]
[ebuild   R   ] app-arch/gzip-1.3.12-r1 
[ebuild   R   ] sys-apps/kbd-1.15 
[ebuild   R   ] sys-apps/net-tools-1.60_p20071202044231-r1 
[ebuild   R   ] sys-apps/gawk-3.1.6 
[ebuild   R   ] app-arch/tar-1.20 
[ebuild   R   ] sys-devel/binutils-2.18-r3 
[ebuild   R   ] sys-apps/man-1.6f-r3 
[ebuild   R   ] sys-apps/man-pages-3.22 
[ebuild   R   ] dev-lang/perl-5.8.8-r8 
[ebuild   R   ] perl-core/Sys-Syslog-0.27 
[ebuild   R   ] perl-core/Storable-2.20 
[ebuild   R   ] dev-perl/Net-Daemon-0.43 
[ebuild   R   ] perl-core/Test-Harness-3.17 
[ebuild   R   ] perl-core/Package-Constants-0.02 
[ebuild   R   ] perl-core/Compress-Raw-Bzip2-2.021 
[ebuild   R   ] perl-core/Compress-Raw-Zlib-2.021 
[ebuild   R   ] perl-core/Scalar-List-Utils-1.21 
[ebuild   R   ] dev-perl/yaml-0.68 
[ebuild     U ] dev-perl/Locale-gettext-1.05-r1 [1.05]
[ebuild   R   ] dev-perl/PlRPC-0.2020-r1 
[ebuild   R   ] perl-core/IO-Compress-2.021 
[ebuild     U ] sys-apps/help2man-1.36.4-r1 [1.36.4]
[ebuild   R   ] perl-core/IO-Zlib-1.09 
[ebuild   R   ] perl-core/Archive-Tar-1.54 
[ebuild   R   ] perl-core/Module-Build-0.34.0201 
[ebuild   R   ] perl-core/ExtUtils-CBuilder-0.26.03 
[ebuild   R   ] perl-core/File-Spec-3.30 
[ebuild   R   ] perl-core/ExtUtils-ParseXS-2.20.0401 
[ebuild   R   ] dev-perl/DBI-1.609 
[ebuild   R   ] sys-devel/autoconf-2.63-r1 
[ebuild   R   ] sys-libs/ncurses-5.6-r2 
[ebuild   R   ] sys-apps/texinfo-4.13 
[ebuild   R   ] app-shells/bash-4.0_p35 
[ebuild   R   ] sys-apps/util-linux-2.16.1 
[ebuild   R   ] sys-apps/less-436 
[ebuild   R   ] app-editors/nano-2.1.10 
[ebuild   R   ] sys-libs/gpm-1.20.5 
[ebuild   R   ] sys-devel/automake-1.10.2 
[ebuild   R   ] app-admin/perl-cleaner-1.05 
[ebuild   R   ] virtual/editor-0 
[ebuild   R   ] virtual/pager-0 
[ebuild   R   ] sys-apps/ed-1.0 
[ebuild   R   ] sys-devel/libtool-2.2.6b 
[ebuild   R   ] sys-libs/readline-6.0_p3 
[ebuild   R   ] sys-libs/db-4.7.25_p4 
[ebuild   R   ] dev-libs/libffi-3.0.8 
[ebuild   R   ] sys-apps/attr-2.4.43 
[ebuild   R   ] sys-apps/groff-1.20.1-r1 
[ebuild   R   ] dev-libs/libpcre-7.9-r1 
[ebuild   R   ] sys-process/psmisc-22.7 
[ebuild   R   ] sys-apps/acl-2.2.47 
[ebuild   R   ] sys-libs/gdbm-1.8.3-r3 
[ebuild     U ] dev-db/sqlite-3.6.20-r1 [3.6.19] USE="-fts3%" 
[ebuild   R   ] sys-apps/grep-2.5.4-r1 
[ebuild   R   ] sys-devel/bc-1.06.95 
[ebuild   R   ] sys-apps/sed-4.2 
[ebuild   R   ] sys-apps/coreutils-7.5-r1 
[ebuild   R   ] net-misc/rsync-3.0.6 
[ebuild   R   ] sys-devel/libperl-5.8.8-r2 
[ebuild   R   ] sys-apps/module-init-tools-3.5 
[ebuild   R   ] sys-kernel/gentoo-sources-2.6.31-r6 
[ebuild     U ] app-admin/eselect-1.2.8 [1.2.3]
[ebuild   R   ] app-admin/eselect-python-20090824 
[ebuild   R   ] sys-libs/e2fsprogs-libs-1.41.9 
[ebuild   R   ] app-crypt/mit-krb5-1.6.3-r6 
[ebuild   R   ] sys-fs/e2fsprogs-1.41.9 
[ebuild   R   ] dev-libs/openssl-0.9.8l-r2 
[ebuild   R   ] dev-lang/python-2.6.4 
[ebuild   R   ] app-misc/ca-certificates-20090709 
[ebuild   R   ] net-misc/wget-1.12 
[ebuild   R   ] sys-libs/cracklib-2.8.13-r1 
[ebuild   R   ] sys-apps/file-5.03 
[ebuild   R   ] dev-libs/libxml2-2.7.3-r2 
[ebuild   R   ] sys-libs/pam-1.1.0 
[ebuild   R   ] dev-db/libpq-8.1.11 
[ebuild   R   ] sys-apps/shadow-4.1.2.2 
[ebuild   R   ] sys-apps/busybox-1.14.2 
[ebuild   R   ] sys-libs/glibc-2.9_p20081201-r2 
[ebuild   R   ] sys-devel/gcc-4.3.4 
[ebuild   R   ] sys-fs/udev-146-r1 
[ebuild   R   ] dev-db/mysql-5.0.84-r1 
[ebuild   R   ] dev-perl/DBD-mysql-4.00.5 
[ebuild   R   ] net-nds/openldap-2.4.19-r1 
[ebuild   R   ] dev-libs/cyrus-sasl-2.1.23-r1 
[ebuild   R   ] net-misc/openssh-5.2_p1-r3 

Estimated update time: 4 hours, 58 minutes.
Small home server (AMD Athlon(tm) 64 X2 Dual Core Processor 4200+). My i7 920 is switched off at the moment :)

-peter

Posted: Sun Jan 03, 2010 3:53 pm
by d2_racing
regomodo wrote:
Quick23t wrote:Sure beats the days of compiling on a P2..
I was doing that until just over a week ago.
I felt your pain :P

Posted: Sun Jan 03, 2010 10:10 pm
by warrens
My previous posted time for this machine was for 64 bit, multilib. I did a test run on my testing disk with settings for 32 bit.
The results are:

Code: Select all

[ebuild   R   ] sys-apps/portage-2.2_rc61 
[ebuild   R   ] virtual/libintl-0         
[ebuild   R   ] sys-libs/zlib-1.2.3-r1    
[ebuild   R   ] sys-devel/gnuconfig-20090819 
[ebuild   R   ] dev-libs/expat-2.0.1-r2      
[ebuild   R   ] dev-libs/gmp-4.3.1           
[ebuild   R   ] virtual/libiconv-0           
[ebuild   R   ] app-misc/pax-utils-0.1.19    
[ebuild   R   ] sys-devel/gcc-config-1.4.1   
[ebuild   R   ] app-portage/portage-utils-0.2.1 
[ebuild   R   ] sys-devel/automake-wrapper-4    
[ebuild   R   ] app-arch/bzip2-1.0.5-r1         
[ebuild   R   ] sys-apps/miscfiles-1.4.2-r1     
[ebuild   R   ] app-misc/mime-types-8           
[ebuild   R   ] app-admin/python-updater-0.7    
[ebuild   R   ] sys-devel/autoconf-wrapper-8    
[ebuild   R   ] sys-apps/tcp-wrappers-7.6-r8    
[ebuild   R   ] sys-libs/timezone-data-2009u    
[ebuild   R   ] dev-libs/oniguruma-5.9.1        
[ebuild   R   ] media-libs/jpeg-7               
[ebuild   R   ] dev-libs/libffi-3.0.9           
[ebuild   R   ] sys-devel/patch-2.6.1           
[ebuild   R   ] app-arch/cpio-2.10              
[ebuild   R   ] sys-apps/which-2.20             
[ebuild   R   ] dev-util/pkgconfig-0.23         
[ebuild   R   ] app-arch/xz-utils-4.999.9_beta  
[ebuild   R   ] media-sound/alsa-headers-1.0.21 
[ebuild   R   ] sys-devel/m4-1.4.13             
[ebuild   R   ] sys-kernel/linux-headers-2.6.30-r1 
[ebuild   R   ] sys-apps/sandbox-2.2               
[ebuild   R   ] media-libs/libpng-1.2.41           
[ebuild   R   ] dev-libs/mpfr-2.4.2_p1             
[ebuild   R   ] dev-java/java-config-wrapper-0.16  
[ebuild   R   ] virtual/libffi-0                   
[ebuild   R   ] sys-apps/net-tools-1.60_p20100101055920 
[ebuild   R   ] sys-apps/sysvinit-2.87-r1               
[ebuild   R   ] net-misc/iputils-20071127-r2            
[ebuild   R   ] virtual/init-0                          
[ebuild   R   ] sys-apps/baselayout-2.0.1               
[ebuild   R   ] sys-apps/module-init-tools-3.11.1       
[ebuild   R   ] sys-apps/debianutils-3.2.2              
[ebuild   R   ] app-shells/bash-completion-1.1-r5       
[ebuild   R   ] app-shells/gentoo-bashcomp-20091225     
[ebuild   R   ] sys-auth/pambase-20090620.1-r1          
[ebuild   R   ] virtual/acl-0                           
[ebuild   R   ] virtual/jdk-1.6.0                       
[ebuild   R   ] virtual/jre-1.6.0                       
[ebuild   R   ] app-admin/eselect-vi-1.1.6              
[ebuild   R   ] app-admin/eselect-fontconfig-1.1        
[ebuild   R   ] sys-devel/binutils-config-2             
[ebuild   R   ] sys-apps/man-pages-posix-2003a          
[ebuild   R   ] app-i18n/man-pages-zh_CN-1.5            
[ebuild   R   ] app-i18n/man-pages-ja-20070515          
[ebuild   R   ] app-admin/gamin-0.1.10                  
[ebuild   R   ] app-admin/eselect-ctags-1.13            
[ebuild   R   ] dev-util/ctags-5.8                      
[ebuild   R   ] sys-devel/autoconf-2.65                 
[ebuild   R   ] sys-devel/automake-1.10.3               
[ebuild   R   ] sys-devel/libtool-2.2.6b                
[ebuild   R   ] dev-lang/tcl-8.5.7                      
[ebuild   R   ] x11-misc/util-macros-1.4.1              
[ebuild   R   ] sys-devel/gettext-0.17                  
[ebuild   R   ] sys-apps/sed-4.2.1                      
[ebuild   R   ] sys-devel/flex-2.5.35                   
[ebuild   R   ] dev-libs/glib-2.22.3                    
[ebuild   R   ] sys-apps/findutils-4.5.5                
[ebuild   R   ] sys-devel/make-3.81                     
[ebuild   R   ] sys-apps/diffutils-2.8.7-r2             
[ebuild   R   ] sys-apps/attr-2.4.43                    
[ebuild   R   ] dev-libs/popt-1.15                      
[ebuild   R   ] app-arch/gzip-1.3.14                    
[ebuild   R   ] sys-apps/kbd-1.15.1                     
[ebuild   R   ] sys-apps/gawk-3.1.7                     
[ebuild   R   ] app-arch/tar-1.22                       
[ebuild   R   ] dev-libs/libgpg-error-1.7               
[ebuild   R   ] sys-devel/binutils-2.20                 
[ebuild   R   ] sys-apps/acl-2.2.47-r1                  
[ebuild   R   ] dev-libs/libpcre-8.00                   
[ebuild   R   ] sys-devel/bison-2.4.1                   
[ebuild   R   ] net-misc/rsync-3.0.6                    
[ebuild   R   ] dev-libs/libgcrypt-1.4.5                
[ebuild   R   ] x11-proto/xproto-7.0.16                 
[ebuild   R   ] x11-proto/xextproto-7.1.1               
[ebuild   R   ] x11-libs/xtrans-1.2.5                   
[ebuild   R   ] x11-proto/inputproto-2.0                
[ebuild   R   ] x11-proto/kbproto-1.0.4                 
[ebuild   R   ] dev-libs/libpthread-stubs-0.1           
[ebuild   R   ] x11-proto/recordproto-1.14              
[ebuild   R   ] sys-apps/grep-2.5.4-r1                  
[ebuild   R   ] x11-proto/renderproto-0.11              
[ebuild   R   ] x11-proto/xf86bigfontproto-1.2.0        
[ebuild   R   ] x11-libs/libXau-1.0.5                   
[ebuild   R   ] x11-libs/libICE-1.0.6                   
[ebuild   R   ] x11-libs/libXdmcp-1.0.3                 
[ebuild   R   ] sys-apps/man-1.6f-r3                    
[ebuild   R   ] sys-apps/man-pages-3.23                 
[ebuild   R   ] sys-kernel/gentoo-sources-2.6.32-r1     
[ebuild   R   ] sys-libs/ncurses-5.7-r3                 
[ebuild   R   ] app-shells/bash-4.0_p35                 
[ebuild   R   ] sys-apps/texinfo-4.13                   
[ebuild   R   ] sys-apps/coreutils-8.2                  
[ebuild   R   ] sys-libs/gpm-1.20.6                     
[ebuild   R   ] app-editors/nano-2.2.1                  
[ebuild   R   ] sys-apps/less-436                       
[ebuild   R   ] sys-process/psmisc-22.7                 
[ebuild   R   ] sys-process/procps-3.2.8                
[ebuild   R   ] sys-libs/readline-6.0_p4                
[ebuild   R   ] virtual/editor-0                        
[ebuild   R   ] virtual/pager-0                         
[ebuild   R   ] dev-db/sqlite-3.6.21                    
[ebuild   R   ] sys-libs/slang-2.2.2                    
[ebuild   R   ] sys-devel/bc-1.06.95                    
[ebuild   R   ] app-admin/eselect-1.2.9                 
[ebuild   R   ] app-editors/vim-core-7.2.303            
[ebuild   R   ] app-misc/ca-certificates-20090709       
[ebuild   R   ] app-admin/perl-cleaner-1.05             
[ebuild   R   ] sys-libs/e2fsprogs-libs-1.41.9          
[ebuild   R   ] x11-libs/libX11-1.3.2                   
[ebuild   R   ] x11-libs/libXext-1.1.1                  
[ebuild   R   ] media-libs/freetype-2.3.11              
[ebuild   R   ] x11-libs/libXrender-0.9.5               
[ebuild   R   ] media-libs/fontconfig-2.8.0             
[ebuild   R   ] x11-libs/libXi-1.3                      
[ebuild   R   ] x11-libs/libXtst-1.1.0                  
[ebuild   R   ] x11-libs/libXft-2.1.14                  
[ebuild   R   ] dev-lang/python-2.6.4                   
[ebuild   R   ] sys-libs/cracklib-2.8.15                
[ebuild   R   ] media-libs/alsa-lib-1.0.21a             
[ebuild   R   ] dev-lang/perl-5.8.8-r8                  
[ebuild   R   ] dev-libs/openssl-0.9.8l-r2              
[ebuild   R   ] sys-apps/util-linux-2.16.2              
[ebuild   R   ] app-editors/vim-7.2.303                 
[ebuild   R   ] dev-perl/Locale-gettext-1.05-r1         
[ebuild   R   ] x11-libs/libSM-1.1.1                    
[ebuild   R   ] app-vim/pam-syntax-20060424             
[ebuild   R   ] app-vim/gentoo-syntax-20090720          
[ebuild   R   ] sys-fs/e2fsprogs-1.41.9                 
[ebuild   R   ] net-misc/wget-1.12                      
[ebuild   R   ] sys-apps/help2man-1.36.4-r1             
[ebuild   R   ] x11-libs/libXt-1.0.7-r1                 
[ebuild   R   ] sys-devel/automake-1.11.1               
[ebuild   R   ] x11-libs/libXmu-1.0.5                   
[ebuild   R   ] dev-lang/tk-8.5.7-r1                    
[ebuild   R   ] sys-apps/dbus-1.2.12                    
[ebuild   R   ] x11-libs/libXpm-3.5.8                   
[ebuild   R   ] media-libs/giflib-4.1.6-r1              
[ebuild   R   ] x11-apps/xauth-1.0.4                    
[ebuild   R   ] dev-libs/dbus-glib-0.82                 
[ebuild   R   ] x11-libs/libXaw-1.0.7                   
[ebuild   R   ] sys-apps/groff-1.20.1-r2                
[ebuild   R   ] app-admin/eselect-python-20091230       
[ebuild   R   ] dev-libs/libxml2-2.7.6                  
[ebuild   R   ] dev-java/java-config-2.1.10             
[ebuild   R   ] dev-libs/libgamin-0.1.10-r2             
[ebuild   R   ] sys-apps/file-5.03                      
[ebuild   R   ] sys-libs/db-4.8.24                      
[ebuild   R   ] app-admin/gam-server-0.1.10             
[ebuild   R   ] sys-libs/db-4.7.25_p4                   
[ebuild   R   ] dev-libs/libxslt-1.1.26
[ebuild   R   ] x11-proto/xcb-proto-1.6
[ebuild   R   ] sys-libs/gdbm-1.8.3-r4
[ebuild   R   ] x11-libs/libxcb-1.5
[ebuild   R   ] sys-devel/libperl-5.8.8-r2
[ebuild   R   ] sys-libs/glibc-2.11-r1
[ebuild   R   ] sys-libs/pam-1.1.1
[ebuild   R   ] sys-devel/gcc-4.4.2
[ebuild   R   ] sys-fs/udev-149
[ebuild   R   ] sys-apps/shadow-4.1.4.2-r1
[ebuild   R   ] sys-auth/consolekit-0.4.1
[ebuild   R   ] sys-apps/openrc-0.6.0
[ebuild   R   ] dev-java/icedtea6-bin-1.6.2
[ebuild   R   ] sys-apps/busybox-1.15.3
[ebuild   R   ] net-misc/openssh-5.3_p1-r1


Estimated update time: 1 hour, 3 minutes.
While not as fast as CoreI7 920's it is over 3 hours quicker than my ol P4c 3.2GHz system that was originally in this case and 13 mins faster than 64 bit. Got to love these quad cores :lol:

Posted: Mon Jan 04, 2010 3:52 am
by d2_racing
In fact, and we use all the cores at least :P

Posted: Wed Jan 13, 2010 1:14 am
by H0bb3z
unlocked Intel QX9770 Quad Core Extreme @3.2GHz per core
6Gb PC12800 DDR3 RAM
ATI 4870 HD 1Gb video
Gigabyte P45 mobo

Code: Select all

emerge -ep system | genlop -p
These are the pretended packages: (this may take a while; wait...)

[ebuild   R   ] sys-apps/portage-2.2_rc61 
[ebuild   R   ] virtual/libintl-0 
[ebuild   R   ] sys-libs/zlib-1.2.3-r1 
[ebuild   R   ] sys-devel/gnuconfig-20090203 
[ebuild   R   ] virtual/libiconv-0 
[ebuild   R   ] dev-libs/expat-2.0.1-r2 
[ebuild   R   ] app-misc/pax-utils-0.1.19 
[ebuild   R   ] app-arch/bzip2-1.0.5-r1 
[ebuild   R   ] dev-libs/gmp-4.3.1 
[ebuild   R   ] sys-devel/autoconf-wrapper-7 
[ebuild   R   ] sys-apps/tcp-wrappers-7.6-r8 
[ebuild   R   ] sys-devel/automake-wrapper-3-r1 
[ebuild   R   ] app-misc/mime-types-8 
[ebuild   R   ] app-admin/python-updater-0.7 
[ebuild   R   ] sys-libs/timezone-data-2009s 
[ebuild   R   ] sys-devel/patch-2.5.9 
[ebuild   R   ] app-arch/cpio-2.9-r2 
[ebuild   R   ] net-dns/openresolv-3.3.2 
[ebuild   R   ] sys-apps/which-2.20 
[ebuild   R   ] sys-apps/funtoo-netscripts-1.1 
[ebuild   R   ] dev-util/pkgconfig-0.23 
[ebuild   R   ] app-arch/lzma-utils-4.32.7 
[ebuild   R   ] app-portage/portage-utils-0.2.1 
[ebuild   R   ] dev-util/gtk-doc-am-1.11 
[ebuild   R   ] sys-devel/m4-1.4.12 
[ebuild   R   ] sys-kernel/linux-headers-2.6.27-r2 
[ebuild   R   ] sys-apps/sandbox-2.2 
[ebuild   R   ] dev-libs/mpfr-2.4.1_p5 
[ebuild   R   ] sys-apps/sysvinit-2.86-r11 
[ebuild   R   ] net-misc/iputils-20071127 
[ebuild   R   ] virtual/init-0 
[ebuild   R   ] sys-apps/baselayout-2.1.6 
[ebuild   R   ] sys-apps/debianutils-3.1.3 
[ebuild   R   ] sys-devel/libperl-5.10.1-r11 
[ebuild   R   ] sys-auth/pambase-20090620.1-r1 
[ebuild   R   ] virtual/acl-0 
[ebuild   R   ] app-admin/eselect-vi-1.1.6 
[ebuild   R   ] sys-devel/gcc-config-1.4.1 
[ebuild   R   ] sys-devel/binutils-config-1.9-r4 
[ebuild   R   ] sys-apps/man-pages-posix-2003a 
[ebuild   R   ] virtual/libffi-0 
[ebuild   R   ] app-admin/eselect-ctags-1.10 
[ebuild   R   ] dev-util/ctags-5.7 
[ebuild   R   ] sys-devel/autoconf-2.63-r1 
[ebuild   R   ] sys-devel/automake-1.10.2 
[ebuild   R   ] sys-devel/libtool-2.2.6b 
[ebuild   R   ] sys-fs/udev-135-r9 
[ebuild   R   ] dev-libs/libffi-3.0.8 
[ebuild   R   ] x11-misc/util-macros-1.3.0 
[ebuild   R   ] sys-devel/gettext-0.17 
[ebuild   R   ] sys-apps/sed-4.2 
[ebuild   R   ] sys-devel/flex-2.5.35 
[ebuild   R   ] sys-apps/findutils-4.4.0 
[ebuild   R   ] dev-libs/glib-2.20.5-r1 
[ebuild   R   ] sys-apps/diffutils-2.8.7-r2 
[ebuild   R   ] sys-apps/attr-2.4.43 
[ebuild   R   ] dev-libs/popt-1.15 
[ebuild   R   ] app-arch/gzip-1.3.12-r1 
[ebuild   R   ] sys-apps/kbd-1.15 
[ebuild   R   ] sys-apps/gawk-3.1.6 
[ebuild   R   ] app-arch/tar-1.20 
[ebuild   R   ] sys-devel/make-3.81 
[ebuild   R   ] sys-apps/net-tools-1.60_p20090728014017-r1 
[ebuild   R   ] dev-libs/libgpg-error-1.7 
[ebuild   R   ] sys-devel/binutils-2.19.1-r1 
[ebuild   R   ] sys-apps/acl-2.2.47 
[ebuild   R   ] sys-devel/bison-2.4.1 
[ebuild   R   ] net-misc/rsync-3.0.6 
[ebuild   R   ] dev-libs/libpcre-7.9-r1 
[ebuild   R   ] sys-apps/module-init-tools-3.5 
[ebuild   R   ] dev-libs/libgcrypt-1.4.4 
[ebuild   R   ] x11-proto/xproto-7.0.16 
[ebuild   R   ] sys-libs/db-4.7.25_p4 
[ebuild   R   ] x11-libs/xtrans-1.2.5 
[ebuild   R   ] x11-proto/kbproto-1.0.4 
[ebuild   R   ] x11-proto/inputproto-1.5.1 
[ebuild   R   ] dev-libs/libpthread-stubs-0.1 
[ebuild   R   ] sys-apps/grep-2.5.4-r1 
[ebuild   R   ] x11-proto/bigreqsproto-1.1.0 
[ebuild   R   ] x11-proto/xcmiscproto-1.2.0 
[ebuild     U ] x11-proto/xf86bigfontproto-1.2.0 [1.1.2]
[ebuild   R   ] x11-proto/xextproto-7.0.5 
[ebuild   R   ] x11-libs/libICE-1.0.6 
[ebuild   R   ] x11-libs/libXau-1.0.5 
[ebuild   R   ] sys-libs/gdbm-1.8.3-r4 
[ebuild   R   ] x11-libs/libXdmcp-1.0.3 
[ebuild   R   ] dev-lang/perl-5.10.1-r12 
[ebuild     U ] dev-perl/Locale-gettext-1.05-r1 [1.05]
[ebuild     U ] sys-apps/help2man-1.36.4-r1 [1.36.4]
[ebuild   R   ] dev-libs/openssl-0.9.8l-r2 
[ebuild   R   ] net-misc/wget-1.12 
[ebuild   R   ] sys-libs/ncurses-5.7-r3 
[ebuild   R   ] app-shells/bash-4.0_p28 
[ebuild   R   ] sys-apps/texinfo-4.13 
[ebuild   R   ] sys-apps/coreutils-7.5-r1 
[ebuild   R   ] sys-apps/util-linux-2.16.1 
[ebuild   R   ] sys-libs/gpm-1.20.5 
[ebuild   R   ] app-editors/nano-2.1.10 
[ebuild   R   ] sys-apps/less-436 
[ebuild   R   ] sys-process/procps-3.2.8 
[ebuild   R   ] sys-process/psmisc-22.7 
[ebuild   R   ] sys-libs/readline-6.0_p3 
[ebuild   R   ] x11-libs/libSM-1.1.1 
[ebuild   R   ] app-misc/ca-certificates-20090709 
[ebuild   R   ] app-admin/perl-cleaner-2_pre091219 
[ebuild   R   ] virtual/editor-0 
[ebuild   R   ] virtual/pager-0 
[ebuild   R   ] dev-db/sqlite-3.6.20-r1 
[ebuild   R   ] sys-devel/bc-1.06.95 
[ebuild   R   ] app-admin/eselect-1.2.9 
[ebuild   R   ] app-admin/eselect-python-20090824 
[ebuild   R   ] dev-lang/python-2.6.4 
[ebuild   R   ] dev-libs/libxml2-2.7.3-r2 
[ebuild   R   ] sys-libs/cracklib-2.8.13-r1 
[ebuild   R   ] sys-apps/file-5.03 
[ebuild   R   ] dev-libs/libxslt-1.1.26 
[ebuild   R   ] x11-proto/xcb-proto-1.5 
[ebuild   R   ] x11-libs/libxcb-1.4-r1 
[ebuild   R   ] x11-libs/libX11-1.2.2 
[ebuild   R   ] x11-libs/libXt-1.0.7-r1 
[ebuild   R   ] x11-libs/libXext-1.0.5 
[ebuild   R   ] x11-libs/libXmu-1.0.5 
[ebuild   R   ] sys-apps/dbus-1.2.3-r1 
[ebuild   R   ] x11-libs/libXpm-3.5.8 
[ebuild   R   ] dev-libs/dbus-glib-0.76 
[ebuild   R   ] x11-apps/xauth-1.0.4 
[ebuild   R   ] x11-libs/libXaw-1.0.7 
[ebuild   R   ] sys-apps/groff-1.20.1-r1 
[ebuild   R   ] app-editors/vim-core-7.2.182 
[ebuild   R   ] app-editors/vim-7.2.182 
[ebuild   R   ] app-vim/pam-syntax-20060424 
[ebuild   R   ] app-vim/gentoo-syntax-20090220 
[ebuild   R   ] sys-libs/e2fsprogs-libs-1.41.9 
[ebuild   R   ] sys-fs/e2fsprogs-1.41.9 
[ebuild   R   ] sys-libs/pam-1.1.0 
[ebuild   R   ] sys-apps/shadow-4.1.2.2 
[ebuild   R   ] sys-auth/consolekit-0.3.0-r2 
[ebuild   R   ] sys-apps/busybox-1.13.4 
[ebuild   R   ] sys-apps/man-1.6f-r3 
[ebuild   R   ] net-misc/openssh-5.2_p1-r3 
[ebuild   R   ] sys-apps/man-pages-3.22 
[ebuild   R   ] sys-libs/glibc-2.9_p20081201-r2 
[ebuild   R   ] sys-apps/openrc-0.6.0 
[ebuild   R   ] sys-devel/gcc-4.3.3-r2 
[ebuild   R   ] sys-apps/iproute2-2.6.29.1-r1 

Estimated update time: 59 minutes.
Not too shabby! I wonder how fast it would be if I overclocked... :twisted:

Posted: Wed Jan 13, 2010 3:59 am
by d2_racing
Did you run with any tweak like custom cflags or with some EMERGE_DEFAULT_OPTS ?

Posted: Wed Jan 13, 2010 4:09 am
by H0bb3z
Nothing too extravagant: (snipped from emerge --info)

Code: Select all

CFLAGS="-march=core2 -O2 -pipe"
CHOST="x86_64-pc-linux-gnu"
CXXFLAGS="-march=core2 -O2 -pipe"
MAKEOPTS="-j4"
I run the funtoo git branch with core2 optimizations. More info about that here

My CPU is actually one of the rare unlocked versions of the QX9770, but I'm not certain that makes too much difference. The on-die caching is huge though, so this may have something to do with the performance...

Posted: Wed Jan 13, 2010 12:38 pm
by d2_racing
You should try this at least : MAKEOPTS="-j5"

Number of cores + 1 = 5 :P

Posted: Fri Jan 15, 2010 4:26 am
by H0bb3z
I did, but I had to scale it back to allow some ebuild to fully compile and haven't changed it back. It's pretty fast already and haven't really noticed a difference!

Note: I reran the test and it still reports 59 minutes after the -j5 update...

Posted: Fri Jan 15, 2010 12:52 pm
by d2_racing
If you have some time, try that :

Code: Select all

MAKEOPTS="-j5 -l5"
EMERGE_DEFAULT_OPTS="--jobs=5 --load-average=5.0 --with-bdeps y"

Posted: Sat May 01, 2010 10:36 am
by Jupiler
Device InformationBlade
Type Server Blade
Manufacturer HP
Product Name ProLiant BL685c G6
CPU and Memory Information
CPU 1 Six-Core AMD Opteron, 2600 MHz
CPU 2 Six-Core AMD Opteron, 2600 MHz
CPU 3 Six-Core AMD Opteron, 2600 MHz
CPU 4 Six-Core AMD Opteron, 2600 MHz
Memory 65536 MB

Disks on Netapp san
20TB netto

Don't have the compile times here :(

Posted: Fri Jun 11, 2010 1:55 pm
by madchaz
Jupiler wrote:Device InformationBlade
Type Server Blade
Manufacturer HP
Product Name ProLiant BL685c G6
CPU and Memory Information
CPU 1 Six-Core AMD Opteron, 2600 MHz
CPU 2 Six-Core AMD Opteron, 2600 MHz
CPU 3 Six-Core AMD Opteron, 2600 MHz
CPU 4 Six-Core AMD Opteron, 2600 MHz
Memory 65536 MB

Disks on Netapp san
20TB netto

Don't have the compile times here :(
*whistle* That's a nice machine. That's 24 cores, lol. I don't think you'd have much compilation time on that, lol.

Posted: Thu Oct 07, 2010 4:47 pm
by luscinius
Xeon W3520 (essentially i7-920) and Quadro FX580 (9500GT) at work.

Code: Select all

emerge -ep system | genlop -p
These are the pretended packages: (this may take a while; wait...)

[ebuild   R   ] sys-libs/zlib-1.2.3-r1 
[ebuild   R   ] virtual/libintl-0 
[ebuild   R   ] dev-libs/expat-2.0.1-r3 
[ebuild   R   ] sys-devel/gnuconfig-20100122 
[ebuild   R   ] app-arch/bzip2-1.0.6 
[ebuild   R   ] virtual/libiconv-0 
[ebuild   R   ] media-libs/jpeg-8b 
[ebuild   R   ] app-misc/pax-utils-0.2.1 
[ebuild   R   ] dev-libs/gmp-4.3.2 
[ebuild   R   ] sys-devel/gcc-config-1.4.1 
[ebuild   R   ] app-misc/mime-types-8 
[ebuild   R   ] app-text/libpaper-1.1.23 
[ebuild   R   ] app-arch/cpio-2.11 
[ebuild   R   ] sys-apps/miscfiles-1.4.2-r1 
[ebuild   R   ] media-fonts/gnu-gs-fonts-std-8.11 
[ebuild   R   ] media-libs/openjpeg-1.3-r2 
[ebuild   R   ] sys-devel/autoconf-wrapper-8 
[ebuild   R   ] sys-apps/tcp-wrappers-7.6-r8 
[ebuild   R   ] sys-fs/sysfsutils-2.1.0 
[ebuild   R   ] sys-devel/automake-wrapper-4 
[ebuild   R   ] sys-libs/timezone-data-2010l 
[ebuild   R   ] dev-libs/libffi-3.0.9 
[ebuild   R   ] sys-devel/patch-2.5.9 
[ebuild   R   ] sys-apps/which-2.20 
[ebuild   R   ] app-arch/xz-utils-4.999.9_beta 
[ebuild   R   ] dev-util/gperf-3.0.4 
[ebuild   R   ] dev-lang/swig-1.3.40-r1 
[ebuild   R   ] app-portage/portage-utils-0.3.1 
[ebuild   R   ] sys-devel/m4-1.4.14-r1 
[ebuild   R   ] sys-kernel/linux-headers-2.6.30-r1 
[ebuild   R   ] virtual/jpeg-0 
[ebuild   R   ] media-libs/libpng-1.4.3 
[ebuild   R   ] sys-apps/sandbox-2.3-r1 
[ebuild   R   ] virtual/libffi-0 
[ebuild   R   ] dev-libs/mpfr-2.4.2_p3 
[ebuild   R   ] sys-apps/pciutils-3.1.4 
[ebuild   R   ] app-arch/unzip-6.0-r1 
[ebuild   R   ] media-libs/tiff-3.9.4 
[ebuild   R   ] sys-apps/sysvinit-2.88-r1 
[ebuild   R   ] media-libs/lcms-1.19 
[ebuild   R   ] virtual/init-0 
[ebuild   R   ] sys-apps/debianutils-3.2.3 
[ebuild   R   ] app-shells/bash-completion-1.2 
[ebuild   R   ] app-shells/gentoo-bashcomp-20090613 
[ebuild   R   ] sys-auth/pambase-20100310 
[ebuild   R   ] virtual/acl-0 
[ebuild   R   ] virtual/perl-digest-base-1.16 
[ebuild   R   ] virtual/opengl-7.0 
[ebuild   R   ] media-libs/glitz-0.5.6 
[ebuild   R   ] app-admin/python-updater-0.8 
[ebuild   R   ] virtual/libusb-0 
[ebuild   R   ] app-admin/eselect-vi-1.1.5 
[ebuild   R   ] virtual/perl-Scalar-List-Utils-1.23 
[ebuild   R   ] app-admin/eselect-opengl-1.1.1-r2 
[ebuild   R   ] virtual/blas-1.0 
[ebuild   R   ] x11-misc/xdg-utils-1.0.2_p20100618 
[ebuild   R   ] app-admin/eselect-fontconfig-1.0 
[ebuild   R   ] sys-devel/binutils-config-1.9-r4 
[ebuild   R   ] app-i18n/man-pages-ru-0.98 
[ebuild   R   ] sys-apps/man-pages-posix-2003a 
[ebuild   R   ] app-admin/eselect-ctags-1.13 
[ebuild   R   ] dev-util/ctags-5.7 
[ebuild   R   ] virtual/perl-libnet-1.22 
[ebuild   R   ] virtual/perl-MIME-Base64-3.08 
[ebuild   R   ] virtual/perl-Digest-MD5-2.39 
[ebuild   R   ] virtual/glu-7.0 
[ebuild   R   ] virtual/ttf-fonts-1 
[ebuild   R   ] virtual/lapack-3.1 
[ebuild   R   ] virtual/cblas-1.0 
[ebuild   R   ] app-text/docbook-xsl-stylesheets-1.75.2 
[ebuild   R   ] app-text/build-docbook-catalog-1.4 
[ebuild   R   ] virtual/perl-IO-Compress-2.024 
[ebuild   R   ] virtual/perl-ExtUtils-CBuilder-0.27.03 
[ebuild   R   ] virtual/perl-Module-Build-0.36.07 
[ebuild   R   ] virtual/perl-Test-Harness-3.17 
[ebuild   R   ] virtual/perl-Archive-Tar-1.54 
[ebuild   R   ] virtual/perl-Package-Constants-0.02 
[ebuild   R   ] virtual/perl-Compress-Raw-Bzip2-2.024 
[ebuild   R   ] virtual/perl-Compress-Raw-Zlib-2.024 
[ebuild   R   ] virtual/perl-IO-Zlib-1.10 
[ebuild   R   ] virtual/perl-ExtUtils-ParseXS-2.22.05 
[ebuild   R   ] sys-devel/autoconf-2.65-r1 
[ebuild   R   ] sys-devel/automake-1.11.1 
[ebuild   R   ] sys-devel/libtool-2.2.10 
[ebuild   R   ] dev-lang/tcl-8.5.7 
[ebuild   R   ] app-text/djvu-3.5.22-r1 
[ebuild   R   ] dev-libs/libusb-0.1.12-r5 
[ebuild   R   ] app-text/sgml-common-0.6.3-r5 
[ebuild   R   ] sys-devel/binutils-2.20.1-r1 
[ebuild   R   ] sys-libs/db-4.8.30 
[ebuild   R   ] sys-libs/db-4.7.25_p4 
[ebuild   R   ] sys-libs/gdbm-1.8.3-r4 
[ebuild   R   ] sys-devel/libperl-5.8.8-r2 
[ebuild   R   ] dev-lang/perl-5.8.8-r8 
[ebuild   R   ] dev-perl/Error-0.17.016 
[ebuild   R   ] dev-perl/Digest-SHA1-2.12 
[ebuild   R   ] perl-core/Scalar-List-Utils-1.23 
[ebuild   R   ] perl-core/libnet-1.22 
[ebuild   R   ] perl-core/digest-base-1.16 
[ebuild   R   ] perl-core/MIME-Base64-3.08 
[ebuild   R   ] perl-core/Digest-MD5-2.39 
[ebuild   R   ] dev-perl/XML-Parser-2.36-r1 
[ebuild   R   ] dev-perl/YAML-Tiny-1.41 
[ebuild   R   ] perl-core/Test-Harness-3.17 
[ebuild   R   ] perl-core/Archive-Tar-1.54 
[ebuild   R   ] perl-core/Package-Constants-0.02 
[ebuild   R   ] perl-core/IO-Compress-2.024 
[ebuild   R   ] perl-core/Compress-Raw-Bzip2-2.024 
[ebuild   R   ] perl-core/Compress-Raw-Zlib-2.024 
[ebuild   R   ] perl-core/IO-Zlib-1.10 
[ebuild   R   ] perl-core/ExtUtils-ParseXS-2.22.05 
[ebuild   R   ] perl-core/ExtUtils-CBuilder-0.27.03 
[ebuild   R   ] dev-perl/Digest-HMAC-1.01-r1 
[ebuild   R   ] perl-core/Module-Build-0.36.07 
[ebuild   R   ] dev-perl/Authen-SASL-2.12 
[ebuild   R   ] dev-util/intltool-0.41.1 
[ebuild   R   ] sys-devel/gettext-0.18.1.1-r1 
[ebuild   R   ] sys-apps/sed-4.2 
[ebuild   R   ] sys-apps/findutils-4.4.2 
[ebuild   R   ] sys-devel/flex-2.5.35 
[ebuild   R   ] sys-devel/bison-2.4.2 
[ebuild   R   ] dev-libs/libgpg-error-1.7 
[ebuild   R   ] sys-apps/attr-2.4.43 
[ebuild   R   ] dev-libs/popt-1.16 
[ebuild   R   ] sys-apps/diffutils-2.8.7-r2 
[ebuild   R   ] app-arch/gzip-1.4 
[ebuild   R   ] sys-apps/kbd-1.15 
[ebuild   R   ] sys-apps/net-tools-1.60_p20090728014017-r1 
[ebuild   R   ] sys-apps/gawk-3.1.6 
[ebuild   R   ] app-arch/tar-1.23-r2 
[ebuild   R   ] sys-devel/make-3.81-r2 
[ebuild   R   ] dev-perl/Locale-gettext-1.05-r1 
[ebuild   R   ] sys-apps/acl-2.2.49 
[ebuild   R   ] dev-libs/libgcrypt-1.4.6 
[ebuild   R   ] net-misc/rsync-3.0.7 
[ebuild   R   ] dev-libs/libtasn1-2.7 
[ebuild   R   ] dev-util/pkgconfig-0.25-r2 
[ebuild     U ] sys-apps/help2man-1.37.1 [1.36.4-r1]
[ebuild   R   ] x11-proto/xproto-7.0.17 
[ebuild   R   ] net-libs/gnutls-2.10.1 
[ebuild   R   ] x11-libs/pixman-0.18.2 
[ebuild   R   ] sys-apps/usbutils-0.86-r1 
[ebuild   R   ] dev-libs/libpcre-7.9-r1 
[ebuild     U ] x11-misc/util-macros-1.10.1 [1.10.0]
[ebuild   R   ] media-fonts/font-util-1.1.1-r1 
[ebuild   R   ] x11-proto/xextproto-7.1.1 
[ebuild   R   ] x11-proto/inputproto-2.0 
[ebuild   R   ] x11-libs/xtrans-1.2.5 
[ebuild   R   ] x11-libs/libXau-1.0.5 
[ebuild   R   ] x11-proto/renderproto-0.11 
[ebuild   R   ] x11-proto/kbproto-1.0.4 
[ebuild   R   ] x11-libs/libXdmcp-1.0.3 
[ebuild   R   ] dev-libs/libpthread-stubs-0.1 
[ebuild   R   ] x11-proto/damageproto-1.2.0 
[ebuild   R   ] x11-proto/xf86vidmodeproto-2.3 
[ebuild   R   ] x11-proto/compositeproto-0.4.1 
[ebuild   R   ] x11-proto/randrproto-1.3.1 
[ebuild   R   ] sys-apps/grep-2.5.4-r1 
[ebuild   R   ] x11-proto/xf86bigfontproto-1.2.0 
[ebuild   R   ] x11-proto/fontcacheproto-0.1.3 
[ebuild   R   ] x11-proto/xf86miscproto-0.9.3 
[ebuild   R   ] x11-misc/makedepend-1.0.2 
[ebuild   R   ] x11-proto/xf86driproto-2.1.0 
[ebuild   R   ] x11-proto/dri2proto-2.3 
[ebuild   R   ] x11-proto/glproto-1.4.11 
[ebuild   R   ] x11-libs/libfontenc-1.0.5 
[ebuild   R   ] x11-libs/libICE-1.0.6 
[ebuild   R   ] x11-proto/fixesproto-4.1.1 
[ebuild   R   ] x11-libs/libdrm-2.4.20-r1 
[ebuild   R   ] dev-libs/openssl-1.0.0a-r3 
[ebuild   R   ] net-misc/curl-7.20.0-r2 
[ebuild   R   ] dev-perl/Net-SSLeay-1.36 
[ebuild   R   ] net-misc/iputils-20100418 
[ebuild   R   ] net-misc/wget-1.12-r2 
[ebuild   R   ] dev-perl/IO-Socket-SSL-1.33 
[ebuild   R   ] dev-perl/Net-SMTP-SSL-1.01 
[ebuild   R   ] sys-apps/man-1.6f-r4 
[ebuild   R   ] sys-apps/man-pages-3.26 
[ebuild   R   ] x11-libs/libX11-1.3.4 
[ebuild   R   ] x11-libs/libXext-1.1.2 
[ebuild   R   ] x11-libs/libXrender-0.9.6 
[ebuild   R   ] media-libs/freetype-2.3.12 
[ebuild   R   ] x11-libs/libXfixes-4.0.5 
[ebuild   R   ] x11-apps/xprop-1.1.0 
[ebuild   R   ] media-libs/fontconfig-2.8.0-r1 
[ebuild   R   ] x11-libs/libXi-1.3.1 
[ebuild   R   ] x11-libs/libXdamage-1.1.3 
[ebuild   R   ] x11-libs/libXcursor-1.1.10 
[ebuild   R   ] x11-libs/libXrandr-1.3.0 
[ebuild   R   ] x11-libs/libXcomposite-0.4.2 
[ebuild   R   ] x11-libs/libXxf86misc-1.0.2 
[ebuild   R   ] x11-libs/libXfontcache-1.0.5 
[ebuild   R   ] x11-libs/libXxf86vm-1.1.0 
[ebuild   R   ] x11-apps/mkfontscale-1.0.7 
[ebuild   R   ] x11-libs/libXft-2.1.14 
[ebuild   R   ] media-libs/freeglut-2.6.0 
[ebuild   R   ] x11-apps/mkfontdir-1.0.5 
[ebuild   R   ] media-fonts/encodings-1.0.3-r1 
[ebuild   R   ] media-libs/jasper-1.900.1-r3 
[ebuild   R   ] media-fonts/dejavu-2.30 
[ebuild   R   ] sys-libs/ncurses-5.7-r3 
[ebuild   R   ] sys-apps/texinfo-4.13 
[ebuild   R   ] sys-apps/coreutils-8.5 
[ebuild   R   ] app-shells/bash-4.0_p37 
[ebuild   R   ] sys-apps/util-linux-2.17.2 
[ebuild   R   ] sys-libs/gpm-1.20.6 
[ebuild   R   ] app-editors/nano-2.2.4 
[ebuild   R   ] sys-apps/less-436 
[ebuild   R   ] sys-process/psmisc-22.12 
[ebuild   R   ] sys-process/procps-3.2.8 
[ebuild   R   ] sys-libs/readline-6.1 
[ebuild   R   ] x11-libs/libSM-1.1.1 
[ebuild   R   ] app-misc/ca-certificates-20090709 
[ebuild   R   ] app-admin/perl-cleaner-1.05 
[ebuild   R   ] virtual/editor-0 
[ebuild   R   ] virtual/pager-0 
[ebuild   R   ] x11-libs/libXt-1.0.8 
[ebuild   R   ] sys-devel/bc-1.06.95 
[ebuild   R   ] x11-libs/libXmu-1.0.5 
[ebuild   R   ] dev-lang/tk-8.5.7 
[ebuild   R   ] sys-apps/dbus-1.2.24 
[ebuild   R   ] x11-libs/libXpm-3.5.8 
[ebuild   R   ] media-libs/mesa-7.8.2 
[ebuild   R   ] x11-apps/xset-1.1.0 
[ebuild   R   ] x11-apps/xauth-1.0.4 
[ebuild   R   ] x11-libs/libXaw-1.0.7 
[ebuild   R   ] sys-apps/groff-1.20.1-r1 
[ebuild   R   ] app-admin/eselect-1.2.10 
[ebuild   R   ] app-admin/eselect-lapack-0.1 
[ebuild   R   ] app-admin/eselect-blas-0.1 
[ebuild   R   ] app-admin/eselect-cblas-0.1 
[ebuild   R   ] sci-libs/lapack-reference-3.1.1-r1 
[ebuild   R   ] sci-libs/blas-reference-20070226 
[ebuild   R   ] sci-libs/cblas-reference-20030223-r4 
[ebuild   R   ] sys-libs/e2fsprogs-libs-1.41.12 
[ebuild   R   ] sys-fs/e2fsprogs-1.41.12 
[ebuild   R   ] dev-util/cmake-2.8.1-r2 
[ebuild   R   ] app-admin/eselect-python-20100321 
[ebuild   R   ] dev-lang/python-2.6.5-r3 
[ebuild   R   ] dev-libs/libxml2-2.7.7 
[ebuild   R   ] dev-lang/python-3.1.2-r4 
[ebuild   R   ] sys-apps/file-5.03 
[ebuild   R   ] sys-apps/portage-2.1.8.3 
[ebuild   R   ] dev-python/setuptools-0.6.14 
[ebuild   R   ] dev-libs/libxslt-1.1.26 
[ebuild   R   ] x11-proto/xcb-proto-1.6 
[ebuild   R   ] app-text/docbook-xml-dtd-4.3-r1 
[ebuild   R   ] x11-libs/libxcb-1.6 
[ebuild   R   ] sys-libs/cracklib-2.8.16 
[ebuild   R   ] dev-python/numpy-1.4.1 
[ebuild   R   ] dev-util/gtk-doc-am-1.15 
[ebuild   R   ] dev-libs/glib-2.24.1-r1 
[ebuild   R   ] x11-libs/xcb-util-0.3.6 
[ebuild   R   ] x11-libs/cairo-1.8.8-r1 
[ebuild   R   ] dev-libs/atk-1.30.0 
[ebuild   R   ] dev-python/pygobject-2.20.0 
[ebuild   R   ] x11-misc/shared-mime-info-0.71 
[ebuild   R   ] dev-util/desktop-file-utils-0.16 
[ebuild   R   ] x11-libs/pango-1.28.1 
[ebuild   R   ] dev-python/pycairo-1.8.8 
[ebuild   R   ] sys-apps/baselayout-1.12.13 
[ebuild   R   ] sys-apps/module-init-tools-3.5 
[ebuild   R   ] app-editors/vim-core-7.2.442 
[ebuild   R   ] app-editors/gvim-7.2.442 
[ebuild   R   ] app-vim/gtk-syntax-20060423 
[ebuild   R   ] app-vim/pam-syntax-20060424 
[ebuild   R   ] app-vim/gentoo-syntax-20100215 
[ebuild   R   ] x11-libs/gtk+-2.20.1-r1 
[ebuild   R   ] gnome-base/libglade-2.6.4 
[ebuild   R   ] app-text/poppler-0.14.1 
[ebuild   R   ] x11-libs/gtksourceview-2.10.4 
[ebuild   R   ] dev-python/pygtk-2.16.0-r1 
[ebuild   R   ] dev-python/pygtksourceview-2.10.1 
[ebuild   R   ] dev-vcs/git-1.7.2.2 
[ebuild   R   ] sys-libs/pam-1.1.1-r2 
[ebuild   R   ] sys-apps/shadow-4.1.4.2-r5 
[ebuild   R   ] sys-apps/busybox-1.15.3 
[ebuild   R   ] net-misc/openssh-5.5_p1-r2 
[ebuild     UD] net-print/cups-1.3.11-r2 [1.4.4] USE="-avahi% -ppds% -zeroconf%" LINGUAS="en%* -et% -he%" 
[ebuild   R   ] app-text/ghostscript-gpl-8.71-r1 
[ebuild   R   ] sys-libs/glibc-2.11.2 
[ebuild   R   ] sys-devel/gcc-4.4.3-r2 
[ebuild   R   ] sys-fs/udev-151-r4 


Estimated update time: 1hour, 47 minutes.

Posted: Thu Oct 07, 2010 10:13 pm
by krinn
Just my 2 cents:
You know guys how weak is your bench no ?

genlop keep track of what was build at what speed, so
- FEATURES="ccache" emerge -1 gcc && FEATURES="ccache" emerge -1 gcc FEATURES="ccache" emerge -1 gcc && FEATURES="ccache" emerge -1 gcc
This will lower your average gcc build time, let's say without ccache you need 2m to build gcc.
First run ccache take 2m30s, next run ccache cut down time to 1,30m: you end with
2,30+1,30+1.3+1.3=average build time for gcc will be 1m45s, without it, your gcc was taking 2m average time. A false "positive" result.
- same with FEATURES="distcc", will gave a false "positive" result,
- a previous cpu with your gentoo, emerge.log as record it's build time for gcc, now you are using a different cpu, but your previous emerge are still log and genlop have no way to know what gcc was build with the old cpu and what gcc was build with the new one. You can end-up with crazy values like 2 hours and 10 minutes, average 1 hour and 5 minutes to build gcc while your cpu will take 10 minutes only
So a false "negative" result

Code: Select all

     Fri Jul 11 04:33:39 2008 >>> sys-devel/gcc-4.3.1-r1
       merge time: 56 minutes and 54 seconds.
Yes, i didn't remove emerge.log since a long time, in fact i use gentoo for more than that, but i think i enable the emerge.log at that time and never removed it since.
- --jobs>1 will also produce a bad value. A false "negative" result. Let's see it.
time emerge --jobs=3 -1 vlc genlop gcc
real 9m10.649s
time emerge --jobs=1 -1 vlc genlop gcc
real 12m43.426s
(i don't use ccache else second run could have been lower, but i did the test with jobs=1 on 2nd to let everything possible help that run instead of the first one with jobs=3, disk caching...)
But why it will produce a false "positive" result so ?
Because using --jobs>1 will max out your cpu usage, lowering total time to build the 3 program, but higher total time tooked to build one, look at my genlop result after the 2 run.

Code: Select all

 * media-video/vlc

     Thu Oct  7 22:56:30 2010 >>> media-video/vlc-1.1.4.1
       merge time: 7 minutes and 45 seconds.

     Thu Oct  7 23:11:01 2010 >>> media-video/vlc-1.1.4.1
       merge time: 4 minutes and 14 seconds.

 * app-portage/genlop

     Thu Oct  7 22:48:52 2010 >>> app-portage/genlop-0.30.8-r2
       merge time: 7 seconds.

     Thu Oct  7 23:06:46 2010 >>> app-portage/genlop-0.30.8-r2
       merge time: 5 seconds.

 * sys-devel/gcc

     Thu Oct  7 22:57:52 2010 >>> sys-devel/gcc-4.4.3-r2
       merge time: 9 minutes and 7 seconds.

     Thu Oct  7 23:06:41 2010 >>> sys-devel/gcc-4.4.3-r2
       merge time: 8 minutes and 20 seconds.
If you compare first value is always higher than 2nd, but this was while using --jobs=3 and you finally end up with less time to build the 3 programs ?
Because 2nd value show all your cpu working on 1 program (and you might have cpu cores idle)
And 1st one show you cpu working 100% on 3 programs in parallel (and this time, as your cpu isn't 100% avaiable to build a program, it will need longer time to produce it). So instead of adding the 3 programs time, you should take the higest time took by the 3 programs to get the final result: here it was gcc with 9minutes 7seconds, close to the time result that was 9m 10s.
But genlop isn't aware of // tasking, and it will add the 3 time to produce it's estimated time, so worst than 12 minutes, genlop will base it on 9m10s+7m45s+7s = 16m45s

To sum up, even it's still far from perfect (program versions need different time to be build, disk/memory speed/size, tmpfs...), using genlop like this will produce a "better" result.
FEATURES="-distcc -ccache" emerge -1 --jobs=1 aprogram
and your last entry in "genlop -t aprogram" is the result of that last emerge.

and for the record, that computer who need 10 minutes to build its gcc, need "Estimated update time: 1 hour, 52 minutes." for the emerge -ep system | genlop -p test :)

Posted: Sat Oct 09, 2010 8:00 am
by Ormaaj
How are you guys doing this? Doesn't work for me. I've done full system merges on this machine many times.

Code: Select all

 # emerge -ep @system | genlop -p
These are the pretended packages: (this may take a while; wait...)


!!! Error: no pretended packages found.