[PALUDIS] Support thread (current v. 0.24.6) - Part 3

Message

dleverton · Post by **dleverton** » Tue Oct 09, 2007 3:27 pm

tecknojunky wrote:
dleverton wrote:
tecknojunky wrote:File is here. (800 kbits upload speed)
What does /etc/env.d/60prelink look like?
Code: Select all
# cat /etc/env.d/60prelink
PRELINK_PATH_MASK="/lib/modules:/usr/lib/locale:/usr/lib/wine:/usr/lib/valgrind:*.la:*.png:*.py:*.pl:*.pm:*.sh:*.xml:*.xslt:*.a:*.js"
PRELINK_PATH=""
Hope it helps

No funny invisible characters in there?

tecknojunky · Post by **tecknojunky** » Wed Oct 10, 2007 2:12 am

dleverton wrote:
tecknojunky wrote:
dleverton wrote:
tecknojunky wrote:File is here. (800 kbits upload speed)
What does /etc/env.d/60prelink look like?
Code: Select all
# cat /etc/env.d/60prelink
PRELINK_PATH_MASK="/lib/modules:/usr/lib/locale:/usr/lib/wine:/usr/lib/valgrind:*.la:*.png:*.py:*.pl:*.pm:*.sh:*.xml:*.xslt:*.a:*.js"
PRELINK_PATH=""
Hope it helps
No funny invisible characters in there?

Unfortunatly.

dleverton · Post by **dleverton** » Wed Oct 10, 2007 9:43 am

tecknojunky wrote:Unfortunatly.

Hmm. The first place in the strace output I can see that it goes wrong is

Code: Select all

27728 open("/lib/modules:/usr/lib/locale:/usr/lib/wine:/usr/lib/", O_RDONLY|O_NONBLOCK|O_LARGEFILE|O_DIRECTORY) = -1 ENOENT (No such file or directory)

but I have no idea why it would try to treat that as a file. Maybe try reinstalling prelink, to make sure you have a fresh copy of the /etc/env.d file.

TheNewOsiris · Post by **TheNewOsiris** » Sat Oct 13, 2007 2:16 am

I can't seem to install barnyard. This is the output I recieve:

Code: Select all

These packages will be installed:

* net-analyzer/barnyard-0.2.0-r2 {:0} [N] mysql postgres sguil
* net-analyzer/sancp-1.6.1-r2 {:0} [N] sguil
* dev-lang/ocaml-3.09.3-r1 {:0} [N] X gdbm -latex ncurses -tk
* dev-ml/findlib-1.1.2_p1 {:0} [N] -doc -tk
* dev-ml/pcre-ocaml-5.12.1 {:0} [N] -examples
* net-analyzer/sguil-sensor-0.6.1 {:0} [N]

Total: 6 packages (6 new)

(1 of 6) Installing net-analyzer/barnyard-0.2.0-r2::gentoo

>>> Running ebuild phase fetch as paludisbuild:paludisbuild...
>>> Starting builtin_fetch
>>> Already have barnyard-0.2.0.tar.gz
>>> Already have barnyard-0.2.0-patches.tar.bz2
 * Checking MD5 for barnyard-0.2.0-patches.tar.bz2 ...                   [ ok ]
 * Checking RMD160 for barnyard-0.2.0-patches.tar.bz2 ...                [ ok ]
 * Checking SHA256 for barnyard-0.2.0-patches.tar.bz2 ...                [ ok ]
 * Checking MD5 for barnyard-0.2.0.tar.gz ...                            [ ok ]
 * Checking RMD160 for barnyard-0.2.0.tar.gz ...                         [ ok ]
 * Checking SHA256 for barnyard-0.2.0.tar.gz ...                         [ ok ]
>>> Done builtin_fetch
>>> Completed ebuild phase fetch
paludis@1192240743: [WARNING] In program paludis --log-level qa --dl-deps-default discard --install =net-analyzer/barnyard-0.2.0-r2::gentoo =net-analyzer/sancp-1.6.1-r2::gentoo =dev-lang/ocaml-3.09.3-r1::gentoo =dev-ml/findlib-1.1.2_p1::gentoo =dev-ml/pcre-ocaml-5.12.1::gentoo =net-analyzer/sguil-sensor-0.6.1::gentoo --add-to-world-spec ( net-analyzer/sguil-client net-analyzer/sguil-server net-analyzer/sguil-sensor ):
  ... When performing install action from command line:
  ... When executing install task:
  ... When installing 'net-analyzer/barnyard-0.2.0-r2':
  ... When checking permissions on '/var/tmp/paludis' for userpriv:
  ... Directory '/var/tmp/paludis' owned by group 'root', not 'paludisbuild', cannot enable userpriv
>>> Running ebuild phase prepare as root:root...
>>> Starting builtin_prepare
>>> Done builtin_prepare
>>> Completed ebuild phase prepare
>>> Running ebuild phases init saveenv as root:root...
>>> Starting builtin_init
>>> Done builtin_init
>>> Starting builtin_saveenv
>>> Done builtin_saveenv
>>> Completed ebuild phases init saveenv
>>> Running ebuild phases loadenv setup saveenv as root:root...
>>> Starting builtin_loadenv
>>> Done builtin_loadenv
>>> Starting pkg_setup
>>> Done pkg_setup
>>> Starting builtin_saveenv
>>> Done builtin_saveenv
>>> Completed ebuild phases loadenv setup saveenv
>>> Running ebuild phases loadenv unpack compile test saveenv as root:root...
>>> Starting builtin_loadenv
>>> Done builtin_loadenv
>>> Starting src_unpack
>>> Unpacking barnyard-0.2.0.tar.gz to /var/tmp/paludis/net-analyzer/barnyard-0.2.0-r2/work
tar zxf /usr/portage/distfiles/barnyard-0.2.0.tar.gz --no-same-owner
>>> Unpacking barnyard-0.2.0-patches.tar.bz2 to /var/tmp/paludis/net-analyzer/barnyard-0.2.0-r2/work
tar jxf /usr/portage/distfiles/barnyard-0.2.0-patches.tar.bz2 --no-same-owner
 * Applying 0.2.0-sguil_files.patch ...                                  [ ok ]
 * Applying 0.2.0-configure-in.patch ...                                 [ ok ]
 * Applying 0.2.0-op_plugbase.c.patch ...                                [ ok ]
 * Recreating configure ...
autoheader-2.61: WARNING: Using auxiliary files such as `acconfig.h', `config.h.bot'
autoheader-2.61: WARNING: and `config.h.top', to define templates for `config.h.in'
autoheader-2.61: WARNING: is deprecated and discouraged.
autoheader-2.61:
autoheader-2.61: WARNING: Using the third argument of `AC_DEFINE' and
autoheader-2.61: WARNING: `AC_DEFINE_UNQUOTED' allows one to define a template without
autoheader-2.61: WARNING: `acconfig.h':
autoheader-2.61:
autoheader-2.61: WARNING:   AC_DEFINE([NEED_FUNC_MAIN], 1,
autoheader-2.61:                [Define if a function `main' is needed.])
autoheader-2.61:
autoheader-2.61: WARNING: More sophisticated templates can also be produced, see the
autoheader-2.61: WARNING: documentation.
>>> Done src_unpack
>>> Starting src_compile
econf: updating /var/tmp/paludis/net-analyzer/barnyard-0.2.0-r2/work/barnyard-0.2.0/config.guess with /usr/share/gnuconfig/config.guess
econf: updating /var/tmp/paludis/net-analyzer/barnyard-0.2.0-r2/work/barnyard-0.2.0/config.sub with /usr/share/gnuconfig/config.sub
./configure --prefix=/usr --host=i686-pc-linux-gnu --mandir=/usr/share/man --infodir=/usr/share/info --datadir=/usr/share --sysconfdir=/etc --localstatedir=/var/lib --enable-tcl --sysconfdir=/etc/snort --enable-postgres --enable-mysql --build=i686-pc-linux-gnu
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking whether make sets $(MAKE)... yes
checking for working aclocal-1.4... found
checking for working autoconf... found
checking for working automake-1.4... found
checking for working autoheader... found
checking for working makeinfo... found
checking for i686-pc-linux-gnu-gcc... no
checking for gcc... gcc
checking for C compiler default output file name... a.out
checking whether the C compiler works... yes
checking whether we are cross compiling... no
checking for suffix of executables...
checking for suffix of object files... o
checking whether we are using the GNU C compiler... yes
checking whether gcc accepts -g... yes
checking for gcc option to accept ISO C89... none needed
checking for gcc option to accept ANSI C... none needed
checking for i686-pc-linux-gnu-ranlib... no
checking for ranlib... ranlib
checking for i686-pc-linux-gnu-gcc... gcc
checking whether we are using the GNU C compiler... (cached) yes
checking whether gcc accepts -g... (cached) yes
checking for gcc option to accept ISO C89... (cached) none needed
checking build system type... i686-pc-linux-gnu
checking host system type... i686-pc-linux-gnu
checking how to run the C preprocessor... gcc -E
checking for grep that handles long lines and -e... /bin/grep
checking for egrep... /bin/grep -E
checking for ANSI C header files... yes
checking for sys/types.h... yes
checking for sys/stat.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for memory.h... yes
checking for strings.h... yes
checking for inttypes.h... yes
checking for stdint.h... yes
checking for unistd.h... yes
checking whether byte ordering is bigendian... no
checking for strings.h... (cached) yes
checking for string.h... (cached) yes
checking for stdlib.h... (cached) yes
checking for unistd.h... (cached) yes
checking sys/sockio.h usability... no
checking sys/sockio.h presence... no
checking for sys/sockio.h... no
checking paths.h usability... yes
checking paths.h presence... yes
checking for paths.h... yes
checking for socket in -lsocket... no
checking whether printf must be declared... no
checking whether fprintf must be declared... no
checking whether syslog must be declared... no
checking whether puts must be declared... no
checking whether fputs must be declared... no
checking whether fputc must be declared... no
checking whether fopen must be declared... no
checking whether fclose must be declared... no
checking whether fwrite must be declared... no
checking whether fflush must be declared... no
checking whether getopt must be declared... no
checking whether bzero must be declared... no
checking whether bcopy must be declared... no
checking whether memset must be declared... no
checking whether strtol must be declared... no
checking whether strcasecmp must be declared... no
checking whether strncasecmp must be declared... no
checking whether strerror must be declared... no
checking whether perror must be declared... no
checking whether socket must be declared... no
checking whether sendto must be declared... no
checking whether vsnprintf must be declared... no
checking whether snprintf must be declared... no
checking whether strtoul must be declared... no
checking for snprintf... yes
checking for strlcpy... no
checking for strlcat... no
checking for strerror... yes
checking /usr/include/mysql/mysql.h usability... yes
checking /usr/include/mysql/mysql.h presence... yes
checking for /usr/include/mysql/mysql.h... yes
checking for mysql_real_connect in -lmysqlclient... yes
checking for tclsh8.4... tclsh8.4
checking for the tcl version number... 8.4, patchlevel .13
checking /usr/include/postgresql/libpq-4/libpq-fe.h usability... yes
checking /usr/include/postgresql/libpq-4/libpq-fe.h presence... yes
checking for /usr/include/postgresql/libpq-4/libpq-fe.h... yes
checking for PQsetdbLogin in -lpq... no


**********************************************
  ERROR: unable to find postgresql library
  checked in the following places
        /usr/lib
**********************************************

make -j2
make: *** No targets specified and no makefile found.  Stop.

!!! ERROR in net-analyzer/barnyard-0.2.0-r2:
!!! In src_compile at line 3061
!!! compile problem

!!! Call stack:
!!!    * src_compile (/var/tmp/paludis/net-analyzer/barnyard-0.2.0-r2/temp/loadsaveenv:3061)
!!!    * ebuild_f_compile (/usr/libexec/paludis/src_compile.bash:51)
!!!    * ebuild_main (/usr/libexec/paludis/ebuild.bash:363)
!!!    * main (/usr/libexec/paludis/ebuild.bash:381)

die trap: exiting with error.

Install error:
  * In program paludis --log-level qa --dl-deps-default discard --install =net-analyzer/barnyard-0.2.0-r2::gentoo =net-analyzer/sancp-1.6.1-r2::gentoo =dev-lang/ocaml-3.09.3-r1::gentoo =dev-ml/findlib-1.1.2_p1::gentoo =dev-ml/pcre-ocaml-5.12.1::gentoo =net-analyzer/sguil-sensor-0.6.1::gentoo --add-to-world-spec ( net-analyzer/sguil-client net-analyzer/sguil-server net-analyzer/sguil-sensor ):
  * When performing install action from command line:
  * When executing install task:
  * When installing 'net-analyzer/barnyard-0.2.0-r2':
  * Install error: Install failed for 'net-analyzer/barnyard-0.2.0-r2::gentoo'


Resume command: paludis --log-level qa --dl-deps-default discard --install '=net-analyzer/barnyard-0.2.0-r2::gentoo' '=net-analyzer/sancp-1.6.1-r2::gentoo' '=dev-lang/ocaml-3.09.3-r1::gentoo' '=dev-ml/findlib-1.1.2_p1::gentoo' '=dev-ml/pcre-ocaml-5.12.1::gentoo' '=net-analyzer/sguil-sensor-0.6.1::gentoo' --add-to-world-spec '( net-analyzer/sguil-client net-analyzer/sguil-server net-analyzer/sguil-sensor )'

pussi · Post by **pussi** » Sat Oct 13, 2007 2:31 am

did you try reinstalling postgresql?

TheNewOsiris · Post by **TheNewOsiris** » Sat Oct 13, 2007 3:24 am

yes, I have reinstalled postgresql and its dependencies.

slycordinator · Post by **slycordinator** » Sat Oct 13, 2007 7:29 am

http://bugs.gentoo.org/show_bug.cgi?id=124921

TheNewOsiris · Post by **TheNewOsiris** » Sat Oct 13, 2007 12:29 pm

so there is no solution?

slycordinator · Post by **slycordinator** » Sat Oct 13, 2007 3:17 pm

Pretty much.

peterbye · Post by **peterbye** » Fri Oct 19, 2007 12:16 pm

I know that Paludis has no equivalent of package.provided and the reason for that.
Can someone tell me how to deal with xorg-server wanting to install the nvidia-drivers ebuild please?
I have the nvidia drivers direct from nVidia, not from the ebuild.
In package_mask.conf I have:

Code: Select all

x11-drivers/nvidia-drivers

In use.conf I have the line:

Code: Select all

*/* VIDEO_CARDS: -* nvidia vesa fbdev

which I presume is what's making xorg-server want to install the nvidia-drivers ebuild.

When I try to build xorg-server I get

Code: Select all

  * When adding PackageDepSpec 'x11-base/xorg-server':
  * When adding package 'x11-base/xorg-server-1.3.0.0::gentoo':
  * When adding post dependencies as post dependencies:
  * When adding PackageDepSpec 'x11-drivers/nvidia-drivers':
  * All versions of 'x11-drivers/nvidia-drivers' are masked. Candidates are:
    * x11-drivers/nvidia-drivers-1.0.7185::gentoo: Masked by user_mask
       etc

so how can I tell it that I have nvidia drivers already and I don't want the ebuild installed?
I'm more than a little concerned that taking nvidia out of the VIDEO_CARDS line will have side effects!
Thanks

Penguin of Wonder · Post by **Penguin of Wonder** » Fri Oct 19, 2007 12:46 pm

Removing nvidia from your VIDEO card section won't change anything. All it is for is telling Paludis which drivers to include. Just take it out, you'll be fine.

zxy · Post by **zxy** » Fri Oct 19, 2007 1:18 pm

@peterbye : or you can put a fake ebuild for nvidia-drivers in your local repository

slycordinator · Post by **slycordinator** » Fri Oct 19, 2007 3:21 pm

What's the advantage of installing nvidia drivers outside of a package manager?

Penguin of Wonder · Post by **Penguin of Wonder** » Fri Oct 19, 2007 3:30 pm

slycordinator, I assume you probably a) already know, and b) were directing that at peterbye, but just in case, the answer is none.

slycordinator · Post by **slycordinator** » Fri Oct 19, 2007 3:36 pm

I was essentially trying to ask why in the hell he wants to do this.

n3Cre0 · Post by **n3Cre0** » Fri Oct 19, 2007 8:21 pm

Hi,

I quickly hacked up an ebuild (v0.9.1) of aircrack-ng to use the svn repo instead of the official releases, but I get this error, when it tries to install:

>>> Starting src_install
make -j2 prefix=/usr docdir=/usr/share/doc/aircrack-ng-9999 mandir=/usr/share/man/man1 destdir=/var/tmp/paludis/net-wireless/aircrack-ng-9999/image/ install doc
make -C src install
make[1]: Entering directory `/var/tmp/paludis/net-wireless/aircrack-ng-9999/work/aircrackng/src'
make -C osdep
install -d /usr/share/doc/aircrack-ng-9999
install -m 644 ChangeLog INSTALLING README LICENSE AUTHORS VERSION /usr/share/doc/aircrack-ng-9999
ACCESS DENIED open_wr: /usr/share/doc/aircrack-ng-9999/ChangeLog
install: cannot create regular file `/usr/share/doc/aircrack-ng-9999/ChangeLog': Permission denied
ACCESS DENIED open_wr: /usr/share/doc/aircrack-ng-9999/INSTALLING
install: cannot create regular file `/usr/share/doc/aircrack-ng-9999/INSTALLING': Permission denied
ACCESS DENIED open_wr: /usr/share/doc/aircrack-ng-9999/README
install: cannot create regular file `/usr/share/doc/aircrack-ng-9999/README': Permission denied
ACCESS DENIED open_wr: /usr/share/doc/aircrack-ng-9999/LICENSE
install: cannot create regular file `/usr/share/doc/aircrack-ng-9999/LICENSE': Permission denied
ACCESS DENIED open_wr: /usr/share/doc/aircrack-ng-9999/AUTHORS
install: cannot create regular file `/usr/share/doc/aircrack-ng-9999/AUTHORS': Permission denied
ACCESS DENIED open_wr: /usr/share/doc/aircrack-ng-9999/VERSION
install: cannot create regular file `/usr/share/doc/aircrack-ng-9999/VERSION': Permission denied
make: *** [doc] Error 1
make: *** Waiting for unfinished jobs....
make[2]: Entering directory `/var/tmp/paludis/net-wireless/aircrack-ng-9999/work/aircrackng/src/osdep'
Building for Linux
make[3]: Entering directory `/var/tmp/paludis/net-wireless/aircrack-ng-9999/work/aircrackng/src/osdep'
make[3]: `.os.Linux' is up to date.
make[3]: Leaving directory `/var/tmp/paludis/net-wireless/aircrack-ng-9999/work/aircrackng/src/osdep'
make[2]: Leaving directory `/var/tmp/paludis/net-wireless/aircrack-ng-9999/work/aircrackng/src/osdep'
make -C osdep install
make[2]: Entering directory `/var/tmp/paludis/net-wireless/aircrack-ng-9999/work/aircrackng/src/osdep'
Building for Linux
make[3]: Entering directory `/var/tmp/paludis/net-wireless/aircrack-ng-9999/work/aircrackng/src/osdep'
make[3]: `.os.Linux' is up to date.
make[3]: Leaving directory `/var/tmp/paludis/net-wireless/aircrack-ng-9999/work/aircrackng/src/osdep'
make[2]: Leaving directory `/var/tmp/paludis/net-wireless/aircrack-ng-9999/work/aircrackng/src/osdep'
install -d /usr/bin
install -m 755 aircrack-ng airdecap-ng packetforge-ng ivstools kstats buddy-ng makeivs-ng /usr/bin
ACCESS DENIED unlink: /usr/bin/aircrack-ng
install: cannot remove `/usr/bin/aircrack-ng': Permission denied
ACCESS DENIED unlink: /usr/bin/airdecap-ng
install: cannot remove `/usr/bin/airdecap-ng': Permission denied
ACCESS DENIED unlink: /usr/bin/packetforge-ng
install: cannot remove `/usr/bin/packetforge-ng': Permission denied
ACCESS DENIED unlink: /usr/bin/ivstools
install: cannot remove `/usr/bin/ivstools': Permission denied
ACCESS DENIED unlink: /usr/bin/kstats
install: cannot remove `/usr/bin/kstats': Permission denied
ACCESS DENIED open_wr: /usr/bin/buddy-ng
install: cannot create regular file `/usr/bin/buddy-ng': Permission denied
ACCESS DENIED open_wr: /usr/bin/makeivs-ng
install: cannot create regular file `/usr/bin/makeivs-ng': Permission denied
make[1]: *** [install] Error 1
make[1]: Leaving directory `/var/tmp/paludis/net-wireless/aircrack-ng-9999/work/aircrackng/src'
make: *** [install] Error 2

!!! ERROR in net-wireless/aircrack-ng-9999:
!!! In src_install at line 3151
!!! emake install failed

!!! Call stack:
!!! * src_install (/var/tmp/paludis/net-wireless/aircrack-ng-9999/temp/loadsaveenv:3151)
!!! * ebuild_f_install (/usr/libexec/paludis/src_install.bash:48)
!!! * ebuild_main (/usr/libexec/paludis/ebuild.bash:363)
!!! * main (/usr/libexec/paludis/ebuild.bash:381)

die trap: exiting with error.
--------------------------- ACCESS VIOLATION SUMMARY ---------------------------
LOG FILE = "/var/log/sandbox/sandbox-27143.log"

open_wr: /usr/share/doc/aircrack-ng-9999/ChangeLog
open_wr: /usr/share/doc/aircrack-ng-9999/INSTALLING
open_wr: /usr/share/doc/aircrack-ng-9999/README
open_wr: /usr/share/doc/aircrack-ng-9999/LICENSE
open_wr: /usr/share/doc/aircrack-ng-9999/AUTHORS
open_wr: /usr/share/doc/aircrack-ng-9999/VERSION
unlink: /usr/bin/aircrack-ng
unlink: /usr/bin/airdecap-ng
unlink: /usr/bin/packetforge-ng
unlink: /usr/bin/ivstools
unlink: /usr/bin/kstats
open_wr: /usr/bin/buddy-ng
open_wr: /usr/bin/makeivs-ng
--------------------------------------------------------------------------------

elog> Summary of messages from net-wireless/aircrack-ng-9999:

elog> * subversion update start -->
elog> * repository: http://trac.aircrack-ng.org/svn/branch/1.0-dev
elog> * working copy: /usr/portage/distfiles/svn-src/aircrack-ng/1.0-dev

Install error:
* In program paludis --safe-resume -i aircrack-ng:
* When performing install action from command line:
* When executing install task:
* When installing 'net-wireless/aircrack-ng-9999':
* Install error: Install failed for 'net-wireless/aircrack-ng-9999::local-portage'

Resume command: paludis --log-level qa --dl-deps-default discard --install '=net-wireless/aircrack-ng-9999::local-portage' --add-to-world-spec '( net-wireless/aircrack-ng )'

But when I go to /var/tmp/paludis/net-wireless/aircrack-ng-9999/work/aircrackng/src/ and just enter 'make install' (it compiled everything already) it installs everything fine

The ebuild:

# Copyright 1999-2007 Gentoo Foundation
# Distributed under the terms of the GNU General Public License v2

inherit toolchain-funcs subversion

ESVN_REPO_URI="http://trac.aircrack-ng.org/svn/branch/1.0-dev"

S="${WORKDIR}/${PN/-/}"

DESCRIPTION="WLAN tools for breaking 802.11 WEP/WPA keys"
HOMEPAGE="http://www.aircrack-ng.org"
SRC_URI=""

LICENSE="GPL-2"
SLOT="0"
KEYWORDS="~amd64 arm ~ppc x86 ~x86-fbsd"
IUSE="wifi"

DEPEND="wifi? ( net-libs/libpcap )"

src_compile() {
emake || die "emake failed"
}

src_install() {
local target
use wifi && target="install" || target="install_userland"
emake \
prefix=/usr \
docdir="/usr/share/doc/${PF}" \
mandir="/usr/share/man/man1" \
destdir="${D}" \
${target} \
doc \
|| die "emake install failed"
}

src_test() {
#./makeivs wep.ivs 11111111111111111111111111 || die 'generating ivs file failed'
#./aircrack-ng wep.ivs || die 'cracking WEP key failed'

# Upstream uses signal in order to quit,
# So protect busybox with process group leader.
"$(tc-getCC)" -o process-group-leader "${FILESDIR}/process-group-leader.c"
./process-group-leader ./aircrack-ng -w test/password.lst test/wpa.cap || die 'cracking WPA key failed'
}

ciaranm (on IRC) told me to edit the ebuild to correspond with the makefile. But I have no clue. So here is the Makefile

ROOT = .
include $(ROOT)/common.mak

SCRIPTS = airmon-ng airdriver-ng patchchk
DOCFILES = ChangeLog INSTALLING README LICENSE AUTHORS VERSION

default: all

all:
$(MAKE) -C src $(@)
$(MAKE) -C test $(@)

aircrack-ng-opt-prof_gen: all
mkdir -p prof
$(MAKE) -C src $(@)

aircrack-ng-opt-prof_use:
$(MAKE) -C src $(@)

install:
$(MAKE) -C src $(@)
$(MAKE) -C test $(@)
install -m 755 $(SCRIPTS) $(DESTDIR)$(sbindir)
install -d $(DESTDIR)$(mandir)
install -m 644 ./manpages/* $(DESTDIR)$(mandir)

uninstall:
$(MAKE) -C src $(@)
$(MAKE) -C test $(@)
-rm -f $(DESTDIR)$(sbindir)/airmon-ng
-rm -f $(DESTDIR)$(sbindir)/airdriver-ng
-rm -f $(DESTDIR)$(sbindir)/patchchk
-rm -f $(DESTDIR)$(mandir)/aircrack-ng.1
-rm -f $(DESTDIR)$(mandir)/airdecap-ng.1
-rm -f $(DESTDIR)$(mandir)/airdriver-ng.1
-rm -f $(DESTDIR)$(mandir)/aireplay-ng.1
-rm -f $(DESTDIR)$(mandir)/airmon-ng.1
-rm -f $(DESTDIR)$(mandir)/airodump-ng.1
-rm -f $(DESTDIR)$(mandir)/airolib-ng.1
-rm -f $(DESTDIR)$(mandir)/airsev-ng.1
-rm -f $(DESTDIR)$(mandir)/airtun-ng.1
-rm -f $(DESTDIR)$(mandir)/buddy-ng.1
-rm -f $(DESTDIR)$(mandir)/easside-ng.1
-rm -f $(DESTDIR)$(mandir)/ivstools.1
-rm -f $(DESTDIR)$(mandir)/kstats.1
-rm -f $(DESTDIR)$(mandir)/makeivs-ng.1
-rm -f $(DESTDIR)$(mandir)/packetforge-ng.1
-rm -f $(DESTDIR)$(mandir)/wesside-ng.1
-rm -fr $(DESTDIR)$(docdir)

strip:
$(MAKE) -C src $(@)
$(MAKE) -C test $(@)

doc:
install -d $(DESTDIR)$(docdir)
install -m 644 $(DOCFILES) $(DESTDIR)$(docdir)

clean:
$(MAKE) -C src $(@)
$(MAKE) -C test $(@)

distclean: clean

Can anyone PLEASE help with this? Thank you

Penguin of Wonder · Post by **Penguin of Wonder** » Fri Oct 19, 2007 8:30 pm

Didn't Ciaram tell you that you need to add the DESTDIR(s) to the ebuild? Or do you not how to do that?

n3Cre0 · Post by **n3Cre0** » Fri Oct 19, 2007 9:27 pm

No, I don't. But if someone would explain how I would know for the future.

beso_1717 · Post by **beso_1717** » Mon Oct 22, 2007 1:33 pm

i have a problem with the default settings options. i cannot configure paludis to read them. where do i have to put the export PALUDIS_OPTIONS="--options" thing?

Penguin of Wonder · Post by **Penguin of Wonder** » Mon Oct 22, 2007 2:02 pm

In your bashrc file, but not the one in /etc/paludis. The other one.

beso_1717 · Post by **beso_1717** » Mon Oct 22, 2007 3:28 pm

what other bashrc?!

Penguin of Wonder · Post by **Penguin of Wonder** » Mon Oct 22, 2007 3:58 pm

The one in your ~/ directory. The one that modifies everything you do in the terminal.

beso_1717 · Post by **beso_1717** » Mon Oct 22, 2007 5:49 pm

that doesn't work!!!! there's no way to put the export PALUDIS_OPTIONS in ~/.bashrc and make paludis get 'em.... there's no real guide about using that. i've done some browsing around but i wasn't able to find nothing useful. it's pretty annoying to always type the options manually...

Penguin of Wonder · Post by **Penguin of Wonder** » Mon Oct 22, 2007 6:03 pm

beso_1717 wrote:that doesn't work!!!! there's no way to put the export PALUDIS_OPTIONS in ~/.bashrc and make paludis get 'em.... there's no real guide about using that. i've done some browsing around but i wasn't able to find nothing useful. it's pretty annoying to always type the options manually...

Actually it does work.

alias paludis='paludis --crazy-default-option'

Next time read.

tecknojunky · Post by **tecknojunky** » Wed Oct 24, 2007 3:23 pm

I was wondering... can you use the ebuild command on paludis base builds?

For example, I had OpenOffice prevented to be installed by the collision-protect script. OO takes 36-40 hours to build on my system and doing "ebuild /usr/portage/app-office/openoffice/openoffice-2.3.0.ebuild qmerge" would have been quite neat, but I'm unsure if it would be compatible with Paludis file tracking system.

[PALUDIS] Support thread (current v. 0.24.6) - Part 3

Re: Stuck at " * Regenerating environment..."

Re: Stuck at " * Regenerating environment..."

Re: Stuck at " * Regenerating environment..."

can't install barnyard.

package.provided type question