KOT, give us more details
dodo
Official thread: "zen-sources" - Part III
Message
- kernelOfTruth
- Watchman
- Posts: 6111
- Joined: Tue Dec 20, 2005 10:34 pm
- Location: Vienna, Austria; Germany; hello world :)
- Contact:
DAMN ! 
I wanted to test-copy 2.6.25-zen0 sources to another folder and it HARDLOCKED
unfortunately the dmesg-file is gone too, fortunately this saved the data's/partition's life
reiser4 is a data-saver , atomic copy ftw
ok, the error message isn't a big deal, it pretty similar to the already posted ones with the rwlock
currently diffing reiser4-trees from 2.6.25-zen0 to 2.6.25-zen1_preview3 I'll try that reiser4-version & let you know if it works
ok, I'm trying the reiser4-version from 2.6.25-zen0, then I'll completely delete the zen-sources repository & re-sync hopefully one of those two will fix it
I wanted to test-copy 2.6.25-zen0 sources to another folder and it HARDLOCKED
unfortunately the dmesg-file is gone too, fortunately this saved the data's/partition's life
reiser4 is a data-saver , atomic copy ftw
ok, the error message isn't a big deal, it pretty similar to the already posted ones with the rwlock
currently diffing reiser4-trees from 2.6.25-zen0 to 2.6.25-zen1_preview3 I'll try that reiser4-version & let you know if it works
try copying a kernel-sources directory to your reiser4-partition & compile it (the kernel) whether it hardlocks or notdodo1122 wrote:it booted fine here. Now paludis does not hang on src_unpack, everything seems to work.
KOT, give us more details
dodo
ok, I'm trying the reiser4-version from 2.6.25-zen0, then I'll completely delete the zen-sources repository & re-sync hopefully one of those two will fix it
https://github.com/kernelOfTruth/ZFS-fo ... scCD-4.9.0
https://github.com/kernelOfTruth/pulsea ... zer-ladspa
Hardcore Gentoo Linux user since 2004
https://github.com/kernelOfTruth/pulsea ... zer-ladspa
Hardcore Gentoo Linux user since 2004
- kernelOfTruth
- Watchman
- Posts: 6111
- Joined: Tue Dec 20, 2005 10:34 pm
- Location: Vienna, Austria; Germany; hello world :)
- Contact:
thanks for notifiyingcreidiki wrote:"Authorities" have been notified:And steps are being taken:<dodo1122_> no
<dodo1122_> that got fixed
<dodo1122_> oh wait
<dodo1122_> no it didn't
<dodo1122_> waninkoko: u sux
<creidiki> XD
<dodo1122_> seriously
<dodo1122_> your failness never ends<dodo1122_> i'm going to break the rule
<dodo1122_> and fix it
obviously (?) it's that version,dodo1122 wrote:the reiser4 currently in master-new is the one from -zen0.
or it might not be... you never know, cuz waninkoko was merging it ;P
dodo
there are however noticable differences (?)
Code: Select all
diff -Nrcpad linux-2.6.25-zen0_test/fs/reiser4/as_ops.c linux-2.6.25-zen1_preview3/fs/reiser4/as_ops.c
*** linux-2.6.25-zen0_test/fs/reiser4/as_ops.c 2008-05-03 00:30:00.382157467 +0200
--- linux-2.6.25-zen1_preview3/fs/reiser4/as_ops.c 2008-05-03 00:34:04.711363347 +0200
*************** int reiser4_set_page_dirty(struct page *
*** 77,83 ****
struct address_space *mapping = page->mapping;
if (mapping) {
! spin_lock_irq(&mapping->tree_lock);
/* check for race with truncate */
if (page->mapping) {
--- 77,83 ----
struct address_space *mapping = page->mapping;
if (mapping) {
! write_lock_irq(&mapping->tree_lock);
/* check for race with truncate */
if (page->mapping) {
*************** int reiser4_set_page_dirty(struct page *
*** 89,95 ****
page->index,
PAGECACHE_TAG_REISER4_MOVED);
}
! spin_unlock_irq(&mapping->tree_lock);
__mark_inode_dirty(mapping->host, I_DIRTY_PAGES);
}
}
--- 89,95 ----
page->index,
PAGECACHE_TAG_REISER4_MOVED);
}
! write_unlock_irq(&mapping->tree_lock);
__mark_inode_dirty(mapping->host, I_DIRTY_PAGES);
}
}
diff -Nrcpad linux-2.6.25-zen0_test/fs/reiser4/plugin/file/cryptcompress.c linux-2.6.25-zen1_preview3/fs/reiser4/plugin/file/cryptcompress.c
*** linux-2.6.25-zen0_test/fs/reiser4/plugin/file/cryptcompress.c 2008-05-03 00:30:00.284965444 +0200
--- linux-2.6.25-zen1_preview3/fs/reiser4/plugin/file/cryptcompress.c 2008-05-03 00:34:04.615866844 +0200
*************** static int find_anon_page_cluster(struct
*** 3438,3444 ****
{
int i = 0;
int found;
! spin_lock_irq(&mapping->tree_lock);
do {
/* looking for one page */
found = radix_tree_gang_lookup_tag(&mapping->page_tree,
--- 3438,3444 ----
{
int i = 0;
int found;
! write_lock_irq(&mapping->tree_lock);
do {
/* looking for one page */
found = radix_tree_gang_lookup_tag(&mapping->page_tree,
*************** static int find_anon_page_cluster(struct
*** 3460,3466 ****
if (last_page_in_cluster(pages[i++]))
break;
} while (1);
! spin_unlock_irq(&mapping->tree_lock);
return i;
}
--- 3460,3466 ----
if (last_page_in_cluster(pages[i++]))
break;
} while (1);
! write_unlock_irq(&mapping->tree_lock);
return i;
}
*************** static int capture_anon_pages(struct add
*** 3535,3544 ****
static int cryptcompress_inode_has_anon_pages(struct inode *inode)
{
int result;
! spin_lock_irq(&inode->i_mapping->tree_lock);
result = radix_tree_tagged(&inode->i_mapping->page_tree,
PAGECACHE_TAG_REISER4_MOVED);
! spin_unlock_irq(&inode->i_mapping->tree_lock);
return result;
}
--- 3535,3544 ----
static int cryptcompress_inode_has_anon_pages(struct inode *inode)
{
int result;
! read_lock_irq(&inode->i_mapping->tree_lock);
result = radix_tree_tagged(&inode->i_mapping->page_tree,
PAGECACHE_TAG_REISER4_MOVED);
! read_unlock_irq(&inode->i_mapping->tree_lock);
return result;
}
diff -Nrcpad linux-2.6.25-zen0_test/fs/reiser4/plugin/file/file.c linux-2.6.25-zen1_preview3/fs/reiser4/plugin/file/file.c
*** linux-2.6.25-zen0_test/fs/reiser4/plugin/file/file.c 2008-05-03 00:30:00.287219501 +0200
--- linux-2.6.25-zen1_preview3/fs/reiser4/plugin/file/file.c 2008-05-03 00:34:04.620516798 +0200
*************** static int has_anonymous_pages(struct in
*** 848,856 ****
{
int result;
! spin_lock_irq(&inode->i_mapping->tree_lock);
result = radix_tree_tagged(&inode->i_mapping->page_tree, PAGECACHE_TAG_REISER4_MOVED);
! spin_unlock_irq(&inode->i_mapping->tree_lock);
return result;
}
--- 848,856 ----
{
int result;
! read_lock_irq(&inode->i_mapping->tree_lock);
result = radix_tree_tagged(&inode->i_mapping->page_tree, PAGECACHE_TAG_REISER4_MOVED);
! read_unlock_irq(&inode->i_mapping->tree_lock);
return result;
}
*************** capture_anonymous_pages(struct address_s
*** 994,1000 ****
nr = 0;
/* find pages tagged MOVED */
! spin_lock_irq(&mapping->tree_lock);
pvec.nr = radix_tree_gang_lookup_tag(&mapping->page_tree,
(void **)pvec.pages, *index, count,
PAGECACHE_TAG_REISER4_MOVED);
--- 994,1000 ----
nr = 0;
/* find pages tagged MOVED */
! write_lock_irq(&mapping->tree_lock);
pvec.nr = radix_tree_gang_lookup_tag(&mapping->page_tree,
(void **)pvec.pages, *index, count,
PAGECACHE_TAG_REISER4_MOVED);
*************** capture_anonymous_pages(struct address_s
*** 1003,1009 ****
* there are no pages tagged MOVED in mapping->page_tree
* starting from *index
*/
! spin_unlock_irq(&mapping->tree_lock);
*index = (pgoff_t)-1;
return 0;
}
--- 1003,1009 ----
* there are no pages tagged MOVED in mapping->page_tree
* starting from *index
*/
! write_unlock_irq(&mapping->tree_lock);
*index = (pgoff_t)-1;
return 0;
}
*************** capture_anonymous_pages(struct address_s
*** 1014,1020 ****
radix_tree_tag_clear(&mapping->page_tree, pvec.pages[i]->index,
PAGECACHE_TAG_REISER4_MOVED);
}
! spin_unlock_irq(&mapping->tree_lock);
*index = pvec.pages[i - 1]->index + 1;
--- 1014,1020 ----
radix_tree_tag_clear(&mapping->page_tree, pvec.pages[i]->index,
PAGECACHE_TAG_REISER4_MOVED);
}
! write_unlock_irq(&mapping->tree_lock);
*index = pvec.pages[i - 1]->index + 1;
*************** capture_anonymous_pages(struct address_s
*** 1039,1051 ****
* set MOVED tag to all pages which left not
* captured
*/
! spin_lock_irq(&mapping->tree_lock);
for (; i < pagevec_count(&pvec); i ++) {
radix_tree_tag_set(&mapping->page_tree,
pvec.pages[i]->index,
PAGECACHE_TAG_REISER4_MOVED);
}
! spin_unlock_irq(&mapping->tree_lock);
pagevec_release(&pvec);
return result;
--- 1039,1051 ----
* set MOVED tag to all pages which left not
* captured
*/
! write_lock_irq(&mapping->tree_lock);
for (; i < pagevec_count(&pvec); i ++) {
radix_tree_tag_set(&mapping->page_tree,
pvec.pages[i]->index,
PAGECACHE_TAG_REISER4_MOVED);
}
! write_unlock_irq(&mapping->tree_lock);
pagevec_release(&pvec);
return result;
*************** capture_anonymous_pages(struct address_s
*** 1055,1065 ****
* 0 for Writeback-ed page. Set MOVED tag on
* that page
*/
! spin_lock_irq(&mapping->tree_lock);
radix_tree_tag_set(&mapping->page_tree,
pvec.pages[i]->index,
PAGECACHE_TAG_REISER4_MOVED);
! spin_unlock_irq(&mapping->tree_lock);
if (i == 0)
*index = pvec.pages[0]->index;
else
--- 1055,1065 ----
* 0 for Writeback-ed page. Set MOVED tag on
* that page
*/
! write_lock_irq(&mapping->tree_lock);
radix_tree_tag_set(&mapping->page_tree,
pvec.pages[i]->index,
PAGECACHE_TAG_REISER4_MOVED);
! write_unlock_irq(&mapping->tree_lock);
if (i == 0)
*index = pvec.pages[0]->index;
else
*************** static int sync_page_list(struct inode *
*** 1135,1141 ****
mapping = inode->i_mapping;
from = 0;
result = 0;
! spin_lock_irq(&mapping->tree_lock);
while (result == 0) {
struct page *page;
--- 1135,1141 ----
mapping = inode->i_mapping;
from = 0;
result = 0;
! read_lock_irq(&mapping->tree_lock);
while (result == 0) {
struct page *page;
*************** static int sync_page_list(struct inode *
*** 1150,1166 ****
* truncating by inode->i_mutex locked by sys_fsync
*/
page_cache_get(page);
! spin_unlock_irq(&mapping->tree_lock);
from = page->index + 1;
result = sync_page(page);
page_cache_release(page);
! spin_lock_irq(&mapping->tree_lock);
}
! spin_unlock_irq(&mapping->tree_lock);
return result;
}
--- 1150,1166 ----
* truncating by inode->i_mutex locked by sys_fsync
*/
page_cache_get(page);
! read_unlock_irq(&mapping->tree_lock);
from = page->index + 1;
result = sync_page(page);
page_cache_release(page);
! read_lock_irq(&mapping->tree_lock);
}
! read_unlock_irq(&mapping->tree_lock);
return result;
}
and off I gothanks
https://github.com/kernelOfTruth/ZFS-fo ... scCD-4.9.0
https://github.com/kernelOfTruth/pulsea ... zer-ladspa
Hardcore Gentoo Linux user since 2004
https://github.com/kernelOfTruth/pulsea ... zer-ladspa
Hardcore Gentoo Linux user since 2004
- kernelOfTruth
- Watchman
- Posts: 6111
- Joined: Tue Dec 20, 2005 10:34 pm
- Location: Vienna, Austria; Germany; hello world :)
- Contact:
one question while it still compiles:
does concurrent-pagecache also include lockless pagecache ?
afaik there were 2 performance enhancing sets included:
concurrent radix tree & lockless pagecache
if yes are those differences in reiser4-code between zen0 and zen1 (at least for me - see diff above) related to one of those patchsets and/or modifications waninkoko made ?
thanks
does concurrent-pagecache also include lockless pagecache ?
afaik there were 2 performance enhancing sets included:
concurrent radix tree & lockless pagecache
if yes are those differences in reiser4-code between zen0 and zen1 (at least for me - see diff above) related to one of those patchsets and/or modifications waninkoko made ?
thanks
https://github.com/kernelOfTruth/ZFS-fo ... scCD-4.9.0
https://github.com/kernelOfTruth/pulsea ... zer-ladspa
Hardcore Gentoo Linux user since 2004
https://github.com/kernelOfTruth/pulsea ... zer-ladspa
Hardcore Gentoo Linux user since 2004
- kernelOfTruth
- Watchman
- Posts: 6111
- Joined: Tue Dec 20, 2005 10:34 pm
- Location: Vienna, Austria; Germany; hello world :)
- Contact:
thanks dodo,
and here's the dmesg before the hardlock (just booted with the latest zen-sources / master-new and it got triggered again
the last seconds 35-36 are related to mount & umount of my /home -partition (saving of dmesg)
and here's the dmesg before the hardlock (just booted with the latest zen-sources / master-new and it got triggered again
el, low) -> IRQ 17
[ 0.266984] PCI: Setting latency timer of device 0000:00:1c.5 to 64
[ 0.266993] PCI: Setting latency timer of device 0000:00:1e.0 to 64
[ 0.267000] NET: Registered protocol family 2
[ 0.349598] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.349966] IPv4 FIB: Using LC-trie version 0.408
[ 0.350019] TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
[ 0.351523] TCP bind hash table entries: 65536 (order: 9, 2097152 bytes)
[ 0.352590] TCP: Hash tables configured (established 262144 bind 65536)
[ 0.352601] TCP reno registered
[ 0.191379] audit: initializing netlink socket (disabled)
[ 0.191398] type=2000 audit(1209776776.380:1): initialized
[ 0.191693] Total HugeTLB memory allocated, 0
[ 0.191814] DLM (built May 3 2008 00:50:07) installed
[ 0.191822] Loading Reiser4. See www.namesys.com for a description of Reiser4.
[ 0.191862] squashfs: version 3.3 (2007/10/31) Phillip Lougher
[ 0.191889] fuse init (API version 7.9)
[ 0.191942] JFS: nTxBlock = 8192, nTxLock = 65536
[ 0.194952] SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled
[ 0.195101] SGI XFS Quota Management subsystem
[ 0.195236] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
[ 0.195247] io scheduler noop registered
[ 0.195252] io scheduler anticipatory registered
[ 0.195258] io scheduler deadline registered
[ 0.195266] io scheduler cfq registered (default)
[ 0.195366] pci 0000:06:00.0: Boot video device
[ 0.195449] PCI: Setting latency timer of device 0000:00:01.0 to 64
[ 0.195474] assign_interrupt_mode Found MSI capability
[ 0.195503] Allocate Port Service[0000:00:01.0:pcie00]
[ 0.195568] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[ 0.195594] assign_interrupt_mode Found MSI capability
[ 0.195627] Allocate Port Service[0000:00:1c.0:pcie00]
[ 0.195657] Allocate Port Service[0000:00:1c.0:pcie02]
[ 0.195729] PCI: Setting latency timer of device 0000:00:1c.3 to 64
[ 0.195755] assign_interrupt_mode Found MSI capability
[ 0.195788] Allocate Port Service[0000:00:1c.3:pcie00]
[ 0.195858] PCI: Setting latency timer of device 0000:00:1c.4 to 64
[ 0.195883] assign_interrupt_mode Found MSI capability
[ 0.195916] Allocate Port Service[0000:00:1c.4:pcie00]
[ 0.195987] PCI: Setting latency timer of device 0000:00:1c.5 to 64
[ 0.196012] assign_interrupt_mode Found MSI capability
[ 0.196045] Allocate Port Service[0000:00:1c.5:pcie00]
[ 0.216769] Real Time Clock Driver v1.12ac
[ 0.216921] hpet_resources: 0xfed00000 is busy
[ 0.216995] Non-volatile memory driver v1.2
[ 0.217067] intel_rng: FWH not detected
[ 0.217093] Linux agpgart interface v0.103
[ 0.217167] ipmi message handler version 39.1
[ 0.217178] Hangcheck: starting hangcheck timer 0.9.0 (tick is 180 seconds, margin is 60 seconds).
[ 0.217189] Hangcheck: Using get_cycles().
[ 0.217428] vesafb: framebuffer at 0xd0000000, mapped to 0xffffc20000680000, using 5120k, total 262144k
[ 0.217440] vesafb: mode is 1280x1024x16, linelength=2560, pages=1
[ 0.217447] vesafb: scrolling: redraw
[ 0.217452] vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
[ 0.242515] Console: switching to colour frame buffer device 160x64
[ 0.265860] fb0: VESA VGA frame buffer device
[ 0.266134] input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[ 0.287053] ACPI: Power Button (FF) [PWRF]
[ 0.287279] input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
[ 0.307886] ACPI: Power Button (CM) [PWRB]
[ 0.498147] ACPI: ACPI0007:00 is registered as cooling_device0
[ 0.498319] ACPI: Processor [CPU1] (supports 8 throttling states)
[ 0.309478] ACPI: ACPI0007:01 is registered as cooling_device1
[ 0.309650] ACPI: Processor [CPU2] (supports 8 throttling states)
[ 0.311388] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
[ 0.312584] brd: module loaded
[ 0.312967] loop: module loaded
[ 0.313063] PPP generic driver version 2.4.2
[ 0.313236] PPP Deflate Compression module registered
[ 0.313384] PPP BSD Compression module registered
[ 0.313576] PPP MPPE Compression module registered
[ 0.313717] NET: Registered protocol family 24
[ 0.313854] PPPoL2TP kernel driver, V1.0
[ 0.314145] tun: Universal TUN/TAP device driver, 1.6
[ 0.314293] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 0.314500] console [netcon0] enabled
[ 0.314607] netconsole: network logging started
[ 0.314909] Driver 'sd' needs updating - please use bus_type methods
[ 0.315119] Driver 'sr' needs updating - please use bus_type methods
[ 0.315370] ahci 0000:00:1f.2: version 3.0
[ 0.315388] ACPI: PCI Interrupt 0000:00:1f.2 -> GSI 23 (level, low) -> IRQ 23
[ 0.315658] ahci 0000:00:1f.2: enabling ASUS P5W DH Deluxe on-board SIMG4726 workaround
[ 1.319477] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode
[ 1.319747] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part
[ 1.319945] PCI: Setting latency timer of device 0000:00:1f.2 to 64
[ 1.320097] scsi0 : ahci
[ 1.320229] scsi1 : ahci
[ 1.320355] scsi2 : ahci
[ 1.320483] scsi3 : ahci
[ 1.320596] ata1: SATA max UDMA/133 abar m1024@0xefffb800 port 0xefffb900 irq 314
[ 1.320814] ata2: SATA max UDMA/133 irq_stat 0x00400040, connection status changed irq 314
[ 1.321773] ata3: SATA max UDMA/133 abar m1024@0xefffb800 port 0xefffba00 irq 314
[ 1.324087] ata4: SATA max UDMA/133 abar m1024@0xefffb800 port 0xefffba80 irq 314
[ 1.800946] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2.030848] ata1.00: ATA-7: ST3250620AS, 3.AAE, max UDMA/133
[ 2.032419] ata1.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 31/32)
[ 2.084081] ata1.00: configured for UDMA/133
[ 4.807894] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 4.810262] ata2.00: ATA-6: Config Disk, RGL10364, max UDMA/133
[ 4.812515] ata2.00: 640 sectors, multi 1: LBA
[ 4.814832] ata2.00: device is on DMA blacklist, disabling DMA
[ 4.817229] ata2.00: configured for PIO4
[ 5.307892] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 5.555901] ata3.00: ATA-7: ST3250824AS, 3.AAH, max UDMA/133
[ 5.557884] ata3.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 31/32)
[ 5.606824] ata3.00: configured for UDMA/133
[ 5.884281] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 6.091111] ata4.00: ATA-6: ST3750330NS, SN04, max UDMA/133
[ 6.092607] ata4.00: 1465149168 sectors, multi 16: LBA48 NCQ (depth 31/32)
[ 6.097458] ata4.00: configured for UDMA/133
[ 5.912939] scsi 0:0:0:0: Direct-Access ATA ST3250620AS 3.AA PQ: 0 ANSI: 5
[ 5.914457] sd 0:0:0:0: [sda] 488397168 512-byte hardware sectors (250059 MB)
[ 5.916691] sd 0:0:0:0: [sda] Write Protect is off
[ 5.918997] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 5.919013] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 5.921349] sd 0:0:0:0: [sda] 488397168 512-byte hardware sectors (250059 MB)
[ 5.923634] sd 0:0:0:0: [sda] Write Protect is off
[ 5.925941] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 5.925957] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 5.928257] sda: unknown partition table
[ 6.175989] sd 0:0:0:0: [sda] Attached SCSI disk
[ 6.178315] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 6.180659] scsi 1:0:0:0: Direct-Access ATA Config Disk RGL1 PQ: 0 ANSI: 5
[ 6.182966] sd 1:0:0:0: [sdb] 640 512-byte hardware sectors (0 MB)
[ 6.185207] sd 1:0:0:0: [sdb] Write Protect is off
[ 6.187514] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 6.187529] sd 1:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[ 6.189859] sd 1:0:0:0: [sdb] 640 512-byte hardware sectors (0 MB)
[ 6.192151] sd 1:0:0:0: [sdb] Write Protect is off
[ 6.194463] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 6.194479] sd 1:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[ 6.196774] sdb: unknown partition table
[ 6.199130] sd 1:0:0:0: [sdb] Attached SCSI disk
[ 6.201464] sd 1:0:0:0: Attached scsi generic sg1 type 0
[ 6.203791] scsi 2:0:0:0: Direct-Access ATA ST3250824AS 3.AA PQ: 0 ANSI: 5
[ 6.206114] sd 2:0:0:0: [sdc] 488397168 512-byte hardware sectors (250059 MB)
[ 6.208355] sd 2:0:0:0: [sdc] Write Protect is off
[ 6.210662] sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[ 6.210678] sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 6.213006] sd 2:0:0:0: [sdc] 488397168 512-byte hardware sectors (250059 MB)
[ 6.215301] sd 2:0:0:0: [sdc] Write Protect is off
[ 6.217606] sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[ 6.217622] sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 6.219922] sdc: sdc1 sdc2 sdc3 sdc4 < sdc5 sdc6 sdc7 sdc8 >
[ 6.289646] sd 2:0:0:0: [sdc] Attached SCSI disk
[ 6.291735] sd 2:0:0:0: Attached scsi generic sg2 type 0
[ 6.294078] scsi 3:0:0:0: Direct-Access ATA ST3750330NS SN04 PQ: 0 ANSI: 5
[ 6.296390] sd 3:0:0:0: [sdd] 1465149168 512-byte hardware sectors (750156 MB)
[ 6.298633] sd 3:0:0:0: [sdd] Write Protect is off
[ 6.300940] sd 3:0:0:0: [sdd] Mode Sense: 00 3a 00 00
[ 6.300955] sd 3:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 6.303288] sd 3:0:0:0: [sdd] 1465149168 512-byte hardware sectors (750156 MB)
[ 6.305577] sd 3:0:0:0: [sdd] Write Protect is off
[ 6.307889] sd 3:0:0:0: [sdd] Mode Sense: 00 3a 00 00
[ 6.307905] sd 3:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 6.310199] sdd: sdd1 sdd2 sdd3 sdd4 < sdd5 sdd6 sdd7 sdd8 sdd9 sdd10 sdd11 >
[ 6.396218] sd 3:0:0:0: [sdd] Attached SCSI disk
[ 6.398216] sd 3:0:0:0: Attached scsi generic sg3 type 0
[ 6.400539] ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 17 (level, low) -> IRQ 17
[ 7.405136] ahci 0000:02:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode
[ 7.407422] ahci 0000:02:00.0: flags: 64bit ncq pm led clo pmp pio slum part
[ 7.409740] PCI: Setting latency timer of device 0000:02:00.0 to 64
[ 7.409837] scsi4 : ahci
[ 7.412105] scsi5 : ahci
[ 7.414415] ata5: SATA max UDMA/133 abar m8192@0xebbfe000 port 0xebbfe100 irq 17
[ 7.416683] ata6: SATA max UDMA/133 abar m8192@0xebbfe000 port 0xebbfe180 irq 17
[ 7.747719] ata5: SATA link down (SStatus 0 SControl 300)
[ 8.381975] ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 8.432338] ata6.00: ATA-7: ST3250620AS, 3.AAE, max UDMA/133
[ 8.432886] ata6.00: 488397168 sectors, multi 0: LBA48 NCQ (depth 31/32)
[ 8.476358] ata6.00: configured for UDMA/133
[ 8.476923] scsi 5:0:0:0: Direct-Access ATA ST3250620AS 3.AA PQ: 0 ANSI: 5
[ 8.479263] sd 5:0:0:0: [sde] 488397168 512-byte hardware sectors (250059 MB)
[ 8.481504] sd 5:0:0:0: [sde] Write Protect is off
[ 8.483811] sd 5:0:0:0: [sde] Mode Sense: 00 3a 00 00
[ 8.483827] sd 5:0:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 8.486158] sd 5:0:0:0: [sde] 488397168 512-byte hardware sectors (250059 MB)
[ 8.488449] sd 5:0:0:0: [sde] Write Protect is off
[ 8.490756] sd 5:0:0:0: [sde] Mode Sense: 00 3a 00 00
[ 8.490771] sd 5:0:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 8.493071] sde: unknown partition table
[ 8.516261] sd 5:0:0:0: [sde] Attached SCSI disk
[ 8.518588] sd 5:0:0:0: Attached scsi generic sg4 type 0
[ 8.520933] ata_piix 0000:00:1f.1: version 2.12
[ 8.520940] ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 22 (level, low) -> IRQ 22
[ 8.523184] PCI: Setting latency timer of device 0000:00:1f.1 to 64
[ 8.523235] scsi6 : ata_piix
[ 8.525530] scsi7 : ata_piix
[ 8.530837] ata7: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14
[ 8.532423] ata8: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15
[ 8.958673] ata7.00: ATAPI: TSSTcorpCD/DVDW SH-S182D, SB06, max UDMA/33
[ 9.125273] ata7.00: configured for UDMA/33
[ 9.191574] scsi 6:0:0:0: CD-ROM TSSTcorp CD/DVDW SH-S182D SB06 PQ: 0 ANSI: 5
[ 9.198372] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 9.199090] Uniform CD-ROM driver Revision: 3.20
[ 9.201477] sr 6:0:0:0: Attached scsi CD-ROM sr0
[ 9.201536] sr 6:0:0:0: Attached scsi generic sg5 type 5
[ 9.206077] ACPI: PCI Interrupt 0000:02:00.1 -> GSI 18 (level, low) -> IRQ 18
[ 9.208369] PCI: Setting latency timer of device 0000:02:00.1 to 64
[ 9.208412] scsi8 : pata_jmicron
[ 9.210716] scsi9 : pata_jmicron
[ 9.213518] ata9: PATA max UDMA/100 cmd 0x9c00 ctl 0x9880 bmdma 0x9400 irq 18
[ 9.215293] ata10: PATA max UDMA/100 cmd 0x9800 ctl 0x9480 bmdma 0x9408 irq 18
[ 9.536784] usbcore: registered new interface driver libusual
[ 9.537160] PNP: No PS/2 controller found. Probing ports directly.
[ 9.543094] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 9.543999] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 9.546386] mice: PS/2 mouse device common for all mice
[ 9.634775] I2O subsystem v1.325
[ 9.636590] i2o: max drivers = 8
[ 9.639086] i2c /dev entries driver
[ 9.641271] device-mapper: uevent: version 1.0.3
[ 9.643591] device-mapper: ioctl: 4.13.0-ioctl (2007-10-18) initialised: dm-devel@redhat.com
[ 9.645881] device-mapper: multipath: version 1.0.5 loaded
[ 9.648164] device-mapper: multipath round-robin: version 1.0.0 loaded
[ 9.650504] EDAC MC: Ver: 2.1.0 May 3 2008
[ 9.652889] cpuidle: using governor ladder
[ 9.655108] cpuidle: using governor menu
[ 9.657477] usbcore: registered new interface driver hiddev
[ 9.659764] usbcore: registered new interface driver usbhid
[ 9.662053] drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
[ 9.664402] Advanced Linux Sound Architecture Driver Version 1.0.16rc2 (Thu Jan 31 16:40:16 2008 UTC).
[ 9.666736] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 19 (level, low) -> IRQ 19
[ 9.669042] PCI: Setting latency timer of device 0000:00:1b.0 to 64
[ 9.714540] ALSA device list:
[ 9.715293] #0: HDA Intel at 0xefffc000 irq 313
[ 9.717654] Netfilter messages via NETLINK v0.30.
[ 9.722274] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 9.724570] arp_tables: (C) 2002 David S. Miller
[ 9.726881] TCP cubic registered
[ 9.729182] Initializing XFRM netlink socket
[ 9.731501] NET: Registered protocol family 1
[ 9.736144] NET: Registered protocol family 10
[ 9.738738] lo: Disabled Privacy Extensions
[ 9.741079] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 9.743086] IPv6 over IPv4 tunneling driver
[ 9.745612] sit0: Disabled Privacy Extensions
[ 9.750139] NET: Registered protocol family 17
[ 9.752333] NET: Registered protocol family 15
[ 9.754648] NET: Registered protocol family 5
[ 9.811914] SCTP: Hash tables configured (established 65536 bind 65536)
[ 9.893151] reiser4: sdd5: found disk format 4.0.0.
[ 10.361132] Switched to high resolution mode on CPU 1
[ 10.002332] Switched to high resolution mode on CPU 0
[ 10.016219] VFS: Mounted root (reiser4 filesystem) readonly.
[ 10.016234] Freeing unused kernel memory: 320k freed
[ 10.018630] Write protecting the kernel read-only data: 1340k
[ 10.023164] Warning: unable to open an initial console.
[ 11.296777] EDAC i82975x: ECC disabled on both channels.
[ 11.351650] ACPI: PCI Interrupt 0000:04:00.0[A] -> GSI 19 (level, low) -> IRQ 19
[ 11.351661] PCI: Setting latency timer of device 0000:04:00.0 to 64
[ 11.351690] sky2 0000:04:00.0: v1.21 addr 0xebdfc000 irq 19 Yukon-EC (0xb6) rev 2
[ 11.352337] sky2 eth0: addr 00:17:31:e8:f3:53
[ 11.352356] ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 11.352363] PCI: Setting latency timer of device 0000:03:00.0 to 64
[ 11.352384] sky2 0000:03:00.0: v1.21 addr 0xebcfc000 irq 16 Yukon-EC (0xb6) rev 2
[ 11.353029] sky2 eth1: addr 00:17:31:ee:e4:18
[ 11.697834] USB Universal Host Controller Interface driver v3.0
[ 11.697866] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 20 (level, low) -> IRQ 20
[ 11.697874] PCI: Setting latency timer of device 0000:00:1d.0 to 64
[ 11.697877] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 11.698161] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
[ 11.698188] uhci_hcd 0000:00:1d.0: irq 20, io base 0x0000e480
[ 11.698291] usb usb1: configuration #1 chosen from 1 choice
[ 11.698309] hub 1-0:1.0: USB hub found
[ 11.698314] hub 1-0:1.0: 2 ports detected
[ 11.446114] input: PC Speaker as /devices/platform/pcspkr/input/input2
[ 11.801050] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
[ 11.801053] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 11.801055] usb usb1: Product: UHCI Host Controller
[ 11.801056] usb usb1: Manufacturer: Linux 2.6.25.1-zen1-preview3-07731-gd0e3fa3 uhci_hcd
[ 11.801058] usb usb1: SerialNumber: 0000:00:1d.0
[ 11.801101] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 20 (level, low) -> IRQ 20
[ 11.801114] PCI: Setting latency timer of device 0000:00:1d.7 to 64
[ 11.801117] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 11.801158] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
[ 11.805047] ehci_hcd 0000:00:1d.7: debug port 1
[ 11.805052] PCI: cache line size of 32 is not supported by device 0000:00:1d.7
[ 11.805059] ehci_hcd 0000:00:1d.7: irq 20, io mem 0xefffbc00
[ 11.817154] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 11.817248] usb usb2: configuration #1 chosen from 1 choice
[ 11.817266] hub 2-0:1.0: USB hub found
[ 11.817273] hub 2-0:1.0: 8 ports detected
[ 11.509751] Linux video capture interface: v2.00
[ 11.557128] cx2388x alsa driver version 0.0.6 loaded
[ 11.921380] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 11.921383] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 11.921385] usb usb2: Product: EHCI Host Controller
[ 11.921386] usb usb2: Manufacturer: Linux 2.6.25.1-zen1-preview3-07731-gd0e3fa3 ehci_hcd
[ 11.921388] usb usb2: SerialNumber: 0000:00:1d.7
[ 11.921427] ACPI: PCI Interrupt 0000:00:1d.1 -> GSI 17 (level, low) -> IRQ 17
[ 11.921435] PCI: Setting latency timer of device 0000:00:1d.1 to 64
[ 11.921438] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 11.921482] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[ 11.921504] uhci_hcd 0000:00:1d.1: irq 17, io base 0x0000e800
[ 11.921586] usb usb3: configuration #1 chosen from 1 choice
[ 11.921603] hub 3-0:1.0: USB hub found
[ 11.921608] hub 3-0:1.0: 2 ports detected
[ 11.628781] cx88/2: cx2388x MPEG-TS Driver Manager version 0.0.6 loaded
[ 11.658243] cx88/0: cx2388x v4l2 driver version 0.0.6 loaded
[ 12.025614] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 12.025616] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 12.025618] usb usb3: Product: UHCI Host Controller
[ 12.025620] usb usb3: Manufacturer: Linux 2.6.25.1-zen1-preview3-07731-gd0e3fa3 uhci_hcd
[ 12.025621] usb usb3: SerialNumber: 0000:00:1d.1
[ 12.025655] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
[ 12.025664] PCI: Setting latency timer of device 0000:00:1d.2 to 64
[ 12.025667] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 12.025706] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[ 12.025728] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000e880
[ 12.025812] usb usb4: configuration #1 chosen from 1 choice
[ 12.025831] hub 4-0:1.0: USB hub found
[ 12.025836] hub 4-0:1.0: 2 ports detected
[ 12.049317] Floppy drive(s): fd0 is 1.44M
[ 12.066168] FDC 0 is a post-1991 82077
[ 12.129714] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 12.129717] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 12.129719] usb usb4: Product: UHCI Host Controller
[ 12.129721] usb usb4: Manufacturer: Linux 2.6.25.1-zen1-preview3-07731-gd0e3fa3 uhci_hcd
[ 12.129722] usb usb4: SerialNumber: 0000:00:1d.2
[ 12.129754] ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 19 (level, low) -> IRQ 19
[ 12.129762] PCI: Setting latency timer of device 0000:00:1d.3 to 64
[ 12.129764] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 12.129805] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
[ 12.129832] uhci_hcd 0000:00:1d.3: irq 19, io base 0x0000ec00
[ 12.129914] usb usb5: configuration #1 chosen from 1 choice
[ 12.129933] hub 5-0:1.0: USB hub found
[ 12.129938] hub 5-0:1.0: 2 ports detected
[ 12.138932] hub 2-0:1.0: unable to enumerate USB device on port 1
[ 12.210751] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 12.210754] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 12.210757] usb usb5: Product: UHCI Host Controller
[ 12.210759] usb usb5: Manufacturer: Linux 2.6.25.1-zen1-preview3-07731-gd0e3fa3 uhci_hcd
[ 12.210761] usb usb5: SerialNumber: 0000:00:1d.3
[ 11.878196] ACPI: PCI Interrupt 0000:01:00.1[A] -> GSI 21 (level, low) -> IRQ 21
[ 11.878590] cx88[0]: subsystem: 0070:9402, board: Hauppauge WinTV-HVR1100 DVB-T/Hybrid [card=40,autodetected]
[ 11.878592] cx88[0]: TV tuner type 63, Radio tuner type -1
[ 12.275497] hub 2-0:1.0: unable to enumerate USB device on port 3
[ 11.990920] tuner' 0-0043: chip found @ 0x86 (cx88[0])
[ 11.990922] tda9887 0-0043: tda988[5/6/7] found
[ 11.994956] tuner' 0-0061: chip found @ 0xc2 (cx88[0])
[ 11.997562] tuner-simple 0-0061: type set to 63 (Philips FMD1216ME MK3 Hybrid Tuner)
[ 12.000103] tuner' 0-0063: chip found @ 0xc6 (cx88[0])
[ 12.047389] tveeprom 0-0050: Hauppauge model 94009, rev C3A0, serial# 429177
[ 12.047392] tveeprom 0-0050: MAC address is 00-0D-FE-06-8C-79
[ 12.047394] tveeprom 0-0050: tuner model is Philips FMD1216ME (idx 100, type 63)
[ 12.047396] tveeprom 0-0050: TV standards PAL(B/G) PAL(I) SECAM(L/L') PAL(D/D1/K) ATSC/DVB Digital (eeprom 0xf4)
[ 12.047398] tveeprom 0-0050: audio processor is CX882 (idx 33)
[ 12.047400] tveeprom 0-0050: decoder processor is CX882 (idx 25)
[ 12.047401] tveeprom 0-0050: has radio, has IR receiver, has no IR transmitter
[ 12.047403] cx88[0]: hauppauge eeprom: model=94009
[ 12.047548] input: cx88 IR (Hauppauge WinTV-HVR110 as /devices/pci0000:00/0000:00:1e.0/0000:01:00.1/input/input3
[ 12.398183] hub 2-0:1.0: unable to enumerate USB device on port 4
[ 12.102052] cx88[0]/1: CX88x/0: ALSA support for cx2388x boards
[ 12.102545] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 21 (level, low) -> IRQ 21
[ 12.102554] cx88[0]/0: found at 0000:01:00.0, rev: 5, irq: 21, latency: 64, mmio: 0xe7000000
[ 12.102581] cx88[0]/0: registered device video0 [v4l2]
[ 12.102594] cx88[0]/0: registered device vbi0
[ 12.102607] cx88[0]/0: registered device radio0
[ 12.106299] cx88[0]/2: cx2388x 8802 Driver Manager
[ 12.106313] ACPI: PCI Interrupt 0000:01:00.2[A] -> GSI 21 (level, low) -> IRQ 21
[ 12.106320] cx88[0]/2: found at 0000:01:00.2, rev: 5, irq: 21, latency: 64, mmio: 0xe9000000
[ 12.106699] ACPI: PCI Interrupt 0000:00:1f.3 -> GSI 23 (level, low) -> IRQ 23
[ 12.107038] ACPI: PCI Interrupt 0000:01:03.0[A] -> GSI 21 (level, low) -> IRQ 21
[ 12.137117] cx88/2: cx2388x dvb driver version 0.0.6 loaded
[ 12.137120] cx88/2: registering cx8802 driver, type: dvb access: shared
[ 12.137123] cx88[0]/2: subsystem: 0070:9402, board: Hauppauge WinTV-HVR1100 DVB-T/Hybrid [card=40]
[ 12.137125] cx88[0]/2: cx2388x based DVB/ATSC card
[ 12.496290] DVB: registering new adapter (cx88[0])
[ 12.496293] DVB: registering frontend 0 (Conexant CX22702 DVB-T)...
[ 12.167899] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[21] MMIO=[ebaff800-ebafffff] Max Packet=[2048] IR/IT contexts=[4/8]
[ 12.615771] usb 2-7: new high speed USB device using ehci_hcd and address 5
[ 12.397204] usb 2-7: configuration #1 chosen from 1 choice
[ 12.397504] hub 2-7:1.0: USB hub found
[ 12.397734] hub 2-7:1.0: 4 ports detected
[ 12.474632] usb 2-7: New USB device found, idVendor=05e3, idProduct=0606
[ 12.474634] usb 2-7: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 12.474636] usb 2-7: Product: USB2.0 Hub
[ 12.692152] usb 3-1: new low speed USB device using uhci_hcd and address 2
[ 12.868360] usb 3-1: configuration #1 chosen from 1 choice
[ 12.887491] input: Microsoft Microsoft IntelliMouse® Optical as /devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1:1.0/input/input4
[ 12.923691] input,hidraw0: USB HID v1.00 Mouse [Microsoft Microsoft IntelliMouse® Optical] on usb-0000:00:1d.1-1
[ 12.923769] usb 3-1: New USB device found, idVendor=045e, idProduct=0039
[ 12.923772] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 12.923775] usb 3-1: Product: Microsoft IntelliMouse® Optical
[ 12.923777] usb 3-1: Manufacturer: Microsoft
[ 12.974564] usb 3-2: new low speed USB device using uhci_hcd and address 3
[ 13.110007] usb 3-2: configuration #1 chosen from 1 choice
[ 13.127233] input: Microsoft Natural® Ergonomic Keyboard 4000 as /devices/pci0000:00/0000:00:1d.1/usb3/3-2/3-2:1.0/input/input5
[ 13.164411] input,hidraw1: USB HID v1.11 Keyboard [Microsoft Natural® Ergonomic Keyboard 4000] on usb-0000:00:1d.1-2
[ 13.185297] input: Microsoft Natural® Ergonomic Keyboard 4000 as /devices/pci0000:00/0000:00:1d.1/usb3/3-2/3-2:1.1/input/input6
[ 13.196934] ieee1394: Host added: ID:BUS[0-00:1023] GUID[0011d80000c1b73d]
[ 13.222297] input,hidraw2: USB HID v1.11 Device [Microsoft Natural® Ergonomic Keyboard 4000] on usb-0000:00:1d.1-2
[ 13.222377] usb 3-2: New USB device found, idVendor=045e, idProduct=00db
[ 13.222380] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 13.222383] usb 3-2: Product: Natural® Ergonomic Keyboard 4000
[ 13.222385] usb 3-2: Manufacturer: Microsoft
[ 13.275489] usb 1-1: new full speed USB device using uhci_hcd and address 2
[ 13.289369] usb 1-1: configuration #1 chosen from 1 choice
[ 13.293658] usb 1-1: New USB device found, idVendor=04f9, idProduct=016e
[ 13.293660] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=3
[ 13.293662] usb 1-1: SerialNumber: BROM4F624801
[ 13.308933] Initializing USB Mass Storage driver...
[ 13.345185] usb 2-7.3: new high speed USB device using ehci_hcd and address 6
[ 13.356499] usb 2-7.3: configuration #1 chosen from 1 choice
[ 13.357306] usb 2-7.3: New USB device found, idVendor=0bda, idProduct=8187
[ 13.357308] usb 2-7.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 13.357310] usb 2-7.3: Product: RTL8187_Wireless
[ 13.357311] usb 2-7.3: Manufacturer: Manufacturer_Realtek_RTL8187_
[ 13.357313] usb 2-7.3: SerialNumber: 0015AF037EDA
[ 13.360091] scsi10 : SCSI emulation for USB Mass Storage devices
[ 13.641242] usb-storage: device found at 2
[ 13.361749] usbcore: registered new interface driver usb-storage
[ 13.641266] usb-storage: waiting for device to settle before scanning
[ 13.361754] USB Mass Storage support registered.
[ 13.367753] usblp0: USB Bidirectional printer dev 2 if 0 alt 0 proto 2 vid 0x04F9 pid 0x016E
[ 13.367769] usbcore: registered new interface driver usblp
[ 16.935204] scsi 10:0:0:0: Direct-Access Brother MFC-5840CN 1.00 PQ: 0 ANSI: 2
[ 16.958352] sd 10:0:0:0: [sdf] Attached SCSI removable disk
[ 16.958352] sd 10:0:0:0: Attached scsi generic sg6 type 0
[ 16.958352] usb-storage: device scan complete
[ 25.104207] ReiserFS: sdd1: found reiserfs format "3.6" with standard journal
[ 25.104207] ReiserFS: sdd1: using ordered data mode
[ 25.104207] reiserfs: using flush barriers
[ 25.118789] ReiserFS: sdd1: journal params: device sdd1, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
[ 25.119175] ReiserFS: sdd1: checking transaction log (sdd1)
[ 25.131984] ReiserFS: sdd1: Using r5 hash to sort names
[ 25.155545] ReiserFS: sdd10: found reiserfs format "3.6" with standard journal
[ 25.155556] ReiserFS: sdd10: using ordered data mode
[ 25.155558] reiserfs: using flush barriers
[ 25.158755] ReiserFS: sdd10: journal params: device sdd10, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
[ 25.159148] ReiserFS: sdd10: checking transaction log (sdd10)
[ 25.159762] ReiserFS: sdd10: Using r5 hash to sort names
[ 25.193321] ReiserFS: sdc8: found reiserfs format "3.6" with standard journal
[ 25.193334] ReiserFS: sdc8: using ordered data mode
[ 25.193336] reiserfs: using flush barriers
[ 25.196799] ReiserFS: sdc8: journal params: device sdc8, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
[ 25.196799] ReiserFS: sdc8: checking transaction log (sdc8)
[ 25.196799] ReiserFS: sdc8: Using r5 hash to sort names
[ 26.072965] sky2 eth0: enabling interface
[ 26.076879] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 26.305918] Adding 4096532k swap on /dev/mapper/system-swap. Priority:-1 extents:1 across:4096532k
[ 26.502355] sky2 eth0: Link is up at 100 Mbps, full duplex, flow control both
[ 26.502366] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 28.388932] eth0: no IPv6 routers present
[ 30.255377] BUG: rwlock bad magic on CPU#0, mysqld/3958, ffff810137c99c68
[ 30.256991] Pid: 3958, comm: mysqld Not tainted 2.6.25.1-zen1-preview3-07731-gd0e3fa3 #1
[ 30.256991]
[ 30.256991] Call Trace:
[ 30.256991] [<ffffffff804a2a69>]
[ 30.256991] [<ffffffff8033d3d1>]
[ 30.256991] [<ffffffff80278a63>]
[ 30.256991] [<ffffffff8027b3f9>]
[ 30.256991] [<ffffffff80286288>]
[ 30.256991] [<ffffffff80288af2>]
[ 30.256991] [<ffffffff8028a6f4>]
[ 30.256991] [<ffffffff8027f923>]
[ 30.256991] [<ffffffff802793d8>]
[ 30.256991] [<ffffffff802c7195>]
[ 30.256991] [<ffffffff802c725e>]
[ 30.256991] [<ffffffff8020c26b>]
[ 30.256991]
[ 33.092566] w83627ehf: Found W83627EHG chip at 0x290
[ 33.109513] coretemp coretemp.0: Using relative temperature scale!
[ 33.111339] coretemp coretemp.1: Using relative temperature scale!
[ 34.757006] device eth0 entered promiscuous mode
[ 34.787094] device eth0 left promiscuous mode
[ 34.067166] device eth0 entered promiscuous mode
[ 35.313768] ReiserFS: dm-1: found reiserfs format "3.6" with standard journal
[ 35.314854] ReiserFS: dm-1: using ordered data mode
[ 35.317159] reiserfs: using flush barriers
[ 35.328732] ReiserFS: dm-1: journal params: device dm-1, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
[ 35.331168] ReiserFS: dm-1: checking transaction log (dm-1)
[ 35.337991] reiserfs: disabling flush barriers on dm-1
[ 36.199477] ReiserFS: dm-1: Using r5 hash to sort names
the last seconds 35-36 are related to mount & umount of my /home -partition (saving of dmesg)
https://github.com/kernelOfTruth/ZFS-fo ... scCD-4.9.0
https://github.com/kernelOfTruth/pulsea ... zer-ladspa
Hardcore Gentoo Linux user since 2004
https://github.com/kernelOfTruth/pulsea ... zer-ladspa
Hardcore Gentoo Linux user since 2004
- kernelOfTruth
- Watchman
- Posts: 6111
- Joined: Tue Dec 20, 2005 10:34 pm
- Location: Vienna, Austria; Germany; hello world :)
- Contact:
gentlemen:
fixed
the mentioned differences from the current reiser4-tree fixed this hardlock bug
http://forums.gentoo.org/viewtopic-p-50 ... ml#5081386
here the packed folder & patch, please include / replace:
http://rapidshare.com/files/112116286/r ... inal.patch
http://rapidshare.com/files/112116533/r ... -zen1.tbz2
now 2.6.25.1-zen1 can go final
thanks & good night
fixed
the mentioned differences from the current reiser4-tree fixed this hardlock bug
http://forums.gentoo.org/viewtopic-p-50 ... ml#5081386
here the packed folder & patch, please include / replace:
http://rapidshare.com/files/112116286/r ... inal.patch
http://rapidshare.com/files/112116533/r ... -zen1.tbz2
now 2.6.25.1-zen1 can go final
thanks & good night
https://github.com/kernelOfTruth/ZFS-fo ... scCD-4.9.0
https://github.com/kernelOfTruth/pulsea ... zer-ladspa
Hardcore Gentoo Linux user since 2004
https://github.com/kernelOfTruth/pulsea ... zer-ladspa
Hardcore Gentoo Linux user since 2004
Please add support for eeepc specific hw modules if possible. It has 4 such modules.
1. atl2 network driver. I've heard that it will be included in main tree as a part of unified atlx module, but donno when it' gonna happen.
Patch for adding atl2 support to kernel can be found here http://people.redhat.com/csnook/atl2/at ... .patch.bz2
It applies fine on gentoo-sources 2.6.25-r1
2. eeepc-linux - this modules adds support for controlling fan and reporting system temperature.
http://eeepc-linux.googlecode.com/files ... 0.2.tar.gz
It compiles fine with gentoo-sources 2.6.25-r1
3. Patched asus_acpi kernel module
http://www.geeentoo.com/patches/asus_acpi_eee.patch.bz2 this patch adds support for controlling eeepc hardware
It also applies fine on latest gentoo-sources 2.6.25-r1
4. patched madwifi module, but i'm not sure if its possible to include it zen-sources at all
http://gentoo-wiki.com/HARDWARE_Asus_Ee ... 06EG_patch
1. atl2 network driver. I've heard that it will be included in main tree as a part of unified atlx module, but donno when it' gonna happen.
Patch for adding atl2 support to kernel can be found here http://people.redhat.com/csnook/atl2/at ... .patch.bz2
It applies fine on gentoo-sources 2.6.25-r1
2. eeepc-linux - this modules adds support for controlling fan and reporting system temperature.
http://eeepc-linux.googlecode.com/files ... 0.2.tar.gz
It compiles fine with gentoo-sources 2.6.25-r1
3. Patched asus_acpi kernel module
http://www.geeentoo.com/patches/asus_acpi_eee.patch.bz2 this patch adds support for controlling eeepc hardware
It also applies fine on latest gentoo-sources 2.6.25-r1
4. patched madwifi module, but i'm not sure if its possible to include it zen-sources at all
http://gentoo-wiki.com/HARDWARE_Asus_Ee ... 06EG_patch
rmh3093 I'm calling you out!
Back in the day when KDE was crashing all the time did you say move to a real OS?
Pain. Yes, pain is what separates the troopers from the men. By the way thanks kernelOfTruth for looking out for your own. Don't give up. We are gonna make it out of the trenches one day.
Will the Catalyst 8.4 drivers compile with any of the zen-preview kernels?
Back in the day when KDE was crashing all the time did you say move to a real OS?
Pain. Yes, pain is what separates the troopers from the men. By the way thanks kernelOfTruth for looking out for your own. Don't give up. We are gonna make it out of the trenches one day.
Will the Catalyst 8.4 drivers compile with any of the zen-preview kernels?
I really hope that people are joking and/or have never looked at the code when they say/imply that ricer4 is the future ...
'((eINIT) (soor overlay))
- MostAwesomeDude
- Guru
- Posts: 373
- Joined: Sun Aug 12, 2007 2:44 pm
I'll get it later.prizident wrote:Please add support for eeepc specific hw modules if possible. It has 4 such modules.
1. atl2 network driver. I've heard that it will be included in main tree as a part of unified atlx module, but donno when it' gonna happen.
Patch for adding atl2 support to kernel can be found here http://people.redhat.com/csnook/atl2/at ... .patch.bz2
It applies fine on gentoo-sources 2.6.25-r1
2. eeepc-linux - this modules adds support for controlling fan and reporting system temperature.
http://eeepc-linux.googlecode.com/files ... 0.2.tar.gz
It compiles fine with gentoo-sources 2.6.25-r1
3. Patched asus_acpi kernel module
http://www.geeentoo.com/patches/asus_acpi_eee.patch.bz2 this patch adds support for controlling eeepc hardware
It also applies fine on latest gentoo-sources 2.6.25-r1
4. patched madwifi module, but i'm not sure if its possible to include it zen-sources at all
http://gentoo-wiki.com/HARDWARE_Asus_Ee ... 06EG_patch
Don't believe the "n00b" under my name.
does that driver work with 2.6.25 non zen???? i dont think so, we are not about to revert patches to make that driver workcharlie wrote:Will the Catalyst 8.4 drivers compile with any of the zen-preview kernels?
... and actually I bet there is 3d support working in with radeonhd before 2.6.26 is out, you should switch to an opensource driver
Do not meddle in the affairs of wizards, for they are subtle and quick to anger.
- MostAwesomeDude
- Guru
- Posts: 373
- Joined: Sun Aug 12, 2007 2:44 pm
We have r500 DRI working in Mesa git w/TCL. All we need now is the fragment shader...rmh3093 wrote:does that driver work with 2.6.25 non zen???? i dont think so, we are not about to revert patches to make that driver workcharlie wrote:Will the Catalyst 8.4 drivers compile with any of the zen-preview kernels?
... and actually I bet there is 3d support working in with radeonhd before 2.6.26 is out, you should switch to an opensource driver
Don't believe the "n00b" under my name.
- darklegion
- Guru
- Posts: 468
- Joined: Sun Nov 14, 2004 1:47 am
Thanks, it's working!kernelOfTruth wrote:gentlemen:
fixed
the mentioned differences from the current reiser4-tree fixed this hardlock bug
http://forums.gentoo.org/viewtopic-p-50 ... ml#5081386
here the packed folder & patch, please include / replace:
http://rapidshare.com/files/112116286/r ... inal.patch
http://rapidshare.com/files/112116533/r ... -zen1.tbz2
now 2.6.25.1-zen1 can go final
thanks & good night
Thanks for the help with ricer4 KOT. I'll poke people until its included, I expect dodo will tag zen1 final as soon as he's up
'((eINIT) (soor overlay))
Its out now.
http://repo.or.cz/w/linux-2.6/zen-sourc ... a49cfac1c0
edit: sf.net was being bloody useless, is what happened.
http://repo.or.cz/w/linux-2.6/zen-sourc ... a49cfac1c0
edit: sf.net was being bloody useless, is what happened.
'((eINIT) (soor overlay))
2.6.25-zen1 tagged.
dodo
sf.net is being a pain, i couldn't upload the patch this morning. I'm going to try again.ejs76 wrote:dodo,
What's wrong with SF.net patches??? After 2.6.25-zen1-preview2 none have showed up...
I did get a RSS message that zen1 is out, but no patch.
dodo
#zen-sources on irc.rizon.net
- MostAwesomeDude
- Guru
- Posts: 373
- Joined: Sun Aug 12, 2007 2:44 pm
I have added these patches to git, under the branch eeepc, based on 2.6.25.1. Please test, and also please ask your upstream to port your asus_acpi patch to the newer asus-laptop module, as asus_acpi is officially deprecated.prizident wrote:Please add support for eeepc specific hw modules if possible. It has 4 such modules.
1. atl2 network driver. I've heard that it will be included in main tree as a part of unified atlx module, but donno when it' gonna happen.
Patch for adding atl2 support to kernel can be found here http://people.redhat.com/csnook/atl2/at ... .patch.bz2
It applies fine on gentoo-sources 2.6.25-r1
2. eeepc-linux - this modules adds support for controlling fan and reporting system temperature.
http://eeepc-linux.googlecode.com/files ... 0.2.tar.gz
It compiles fine with gentoo-sources 2.6.25-r1
3. Patched asus_acpi kernel module
http://www.geeentoo.com/patches/asus_acpi_eee.patch.bz2 this patch adds support for controlling eeepc hardware
It also applies fine on latest gentoo-sources 2.6.25-r1
4. patched madwifi module, but i'm not sure if its possible to include it zen-sources at all
http://gentoo-wiki.com/HARDWARE_Asus_Ee ... 06EG_patch
Oh, and I had to guess a lot at the modules that eeepc depends on. Please test and tell me if you cannot build or insmod eeepc.
And, of course, madwifi isn't added yet due to being on a different branch. I'm trying to figure out a nice way to do it.
Don't believe the "n00b" under my name.
I'm just curious why "Whine" and not "Wine"? Maybe it is some kind of joke I can't understand.
Does the official 2.6.25-zen1 contain the ipw3945 driver?
Code: Select all
--- a/Makefile
+++ b/Makefile
@@ -1,8 +1,8 @@
VERSION = 2
PATCHLEVEL = 6
SUBLEVEL = 25
-EXTRAVERSION = .1
-NAME = Funky Weasel is Jiggy wit it
+EXTRAVERSION =
+NAME = Would you like some Cheese with your Whine, Sir?