HP Ipaq not recongized

[extraketchup]

Help please!

I'm the proud new owner of an HP rx1950 Ipaq PocketPC (though I wish it ran Linux). I also am an avid fan of KDE's latest PIM suite (Kontact, Korganizer, etc.). I'd love be be able to sync between the two, but my first problem to overcome is getting Linux (particularly the kernel) to even recognize the PDA.

When I plug the PDA in, it does come up under the USB devices. In fact, here's the copy of /proc/bus/usb/devices (for the PDA):

T: Bus=01 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 12 Spd=12 MxCh= 0
D: Ver= 2.00 Cls=ef(unk. ) Sub=01 Prot=01 MxPS= 8 #Cfgs= 1
P: Vendor=03f0 ProdID=1c1d Rev= 0.00
S: Manufacturer=HP
S: Product=Generic RNDIS
C:* #Ifs= 2 Cfg#= 1 Atr=c0 MxPwr= 2mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=ef(unk. ) Sub=01 Prot=01 Driver=(none)
E: Ad=81(I) Atr=03(Int.) MxPS= 64 Ivl=1ms
I: If#= 1 Alt= 0 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=(none)
E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=04(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms

This PDA runs Windows Mobile 5, and I've read some things have changed with the sync process in this new mobile OS. As for drivers, I've tried the ipaq kernel module (under USB serial devices), I've tried the usbnet and rndis_host. In fact, here's a list of modules that are loaded (obviously not all relate the the Ipaq).

Module Size Used by
nfs 172424 1
lockd 43848 2 nfs
sunrpc 105276 3 nfs,lockd
ipaq 14032 0
pl2303 14980 0
usbserial 20456 2 ipaq,pl2303
rndis_host 2816 0
cdc_ether 2560 1 rndis_host
usbnet 8328 2 rndis_host,cdc_ether
i915 12352 1
drm 47636 2 i915
8139too 14912 0
crc32 3008 1 8139too
snd_mixer_oss 11840 0
snd_intel8x0 19612 0
snd_ac97_codec 68832 1 snd_intel8x0
snd_ac97_bus 896 1 snd_ac97_codec
snd_pcm 51656 2 snd_intel8x0,snd_ac97_codec
snd_timer 14340 1 snd_pcm
snd 31204 5 snd_mixer_oss,snd_intel8x0,snd_ac97_codec,snd_pcm,snd_timer
snd_page_alloc 4680 2 snd_intel8x0,snd_pcm
psmouse 26120 0
sd_mod 10896 0
sg 21340 0
usb_storage 21252 0
ehci_hcd 22472 0
uhci_hcd 15500 0
usbcore 85120 10 ipaq,pl2303,usbserial,rndis_host,cdc_ether,usbnet,usb_storage,ehci_hcd,uhci_hcd

So, looking at this list, then looking at the output from the usb devices file, why am I getting "Driver=(none)" ???

I'm using kernel version 2.6.17.4. Please help if you can!!!

Mike