| View previous topic :: View next topic |
| Author |
Message |
chameleon
n00b
Joined: 16 Aug 2002
Posts: 35
Location: Germany
|
 Posted: Thu May 15, 2003 6:46 am Post subject: Fritz! Card PCI - PC hangs if I start ISDN software |
 |
|
Hi guys,
i just installed everything for getting and sending faxes with my
PC. If i start any ISDN software like capifaxrcvd my PC stands still
and I have to make a hard reset!
I cann successfully start /etc/init.d/capi start and all modules are
loaded by this init script but if I want to make a test call to AVM
or any other number my PC hangs ... and then reset!
| Code: |
Used hardware:
+ Fritz! Card PCI
Used software:
+ fcpci
+ isdn support built into kernel
+ capi2.0 support built as module
Kernel:
<M> CAPI2.0 support
[*] Verbose reason code reporting (kernel size +=7K)
[*] CAPI2.0 Middleware support (EXPERIMENTAL)
<M> CAPI2.0 /dev/capi support
[*] CAPI2.0 filesystem support
<M> CAPI2.0 capidrv interface support
|
greetz chameleon |
|
| Back to top |
|
 |
akb
Guru
Joined: 25 Jan 2003
Posts: 314
Location: Wolfenbüttel/Germany
|
| Posted: Fri May 16, 2003 7:00 am Post subject: |
|
|
i got a similar problem, like at least three people at now. i really would like to know what it is related to... so i could report a bug or something 
here's a link to my thread about it: https://forums.gentoo.org/viewtopic.php?p=324780 |
|
| Back to top |
|
|
CjK
n00b
Joined: 08 May 2003
Posts: 6
Location: Germany
|
| Posted: Sat May 17, 2003 4:29 pm Post subject: |
|
|
That's probably because you have SMP compiled into your kernel (which is the default, I guess). The AVM driver doesn't support SMP and therefore hangs the system.
Recompile your kernel with Single CPU support and you should be fine.
CjK |
|
| Back to top |
|
|
akb
Guru
Joined: 25 Jan 2003
Posts: 314
Location: Wolfenbüttel/Germany
|
| Posted: Sat May 17, 2003 10:09 pm Post subject: |
|
|
yeehaw, it works. it really WORKS. thx honey   |
|
| Back to top |
|
|
el*Loco
Tux's lil' helper
Joined: 29 Jan 2003
Posts: 91
Location: Cologne, Germany
|
| Posted: Mon Sep 15, 2003 1:26 pm Post subject: |
|
|
| CjK wrote: | That's probably because you have SMP compiled into your kernel (which is the default, I guess). The AVM driver doesn't support SMP and therefore hangs the system.
Recompile your kernel with Single CPU support and you should be fine.
|
I don't know what my Dual-P3 (at least one of the two CPUs) thinks about it No other solution? |
|
| Back to top |
|
|
el*Loco
Tux's lil' helper
Joined: 29 Jan 2003
Posts: 91
Location: Cologne, Germany
|
| Posted: Mon Sep 15, 2003 1:26 pm Post subject: |
|
|
| * double post * |
|
| Back to top |
|
|
|
Networking & Security
