Gentoo Forums
Gentoo Forums
Gentoo Forums
Quick Search: in
[SOLVED] Black screen on kernel 3.14.14
View unanswered posts
View posts from last 24 hours

 
Reply to topic    Gentoo Forums Forum Index Kernel & Hardware
View previous topic :: View next topic  
Author Message
Catanduva
Tux's lil' helper
Tux's lil' helper


Joined: 25 Dec 2008
Posts: 77
Location: Brazil

PostPosted: Wed Aug 06, 2014 9:11 pm    Post subject: [SOLVED] Black screen on kernel 3.14.14 Reply with quote

This thing is driving me crazy.

Did an update today and used the exact same config as 3.12.21, but when my system starts i get a black screen with some white dots.
The system boots just fine, i can log into TTY and do anything i want, but i can't see anything and when i type "startx" my monitor goes on sleep mode.

The weird thing is this:

I'm booting in EFI without any bootloader (just using efibootmgr and the motherboard "bootloader").
My /boot/EFI/gentoo folder has two files: kernel.efi and oldkernel.efi

Every time i emerge a new kernel i do a "mv kernel.efi oldkernel.efi" and put the new kernel under the name kernel.efi. So i don't have to mess with efibootmgr every time.

When i do this with 3.14.14 i get the black granulated screen with both kernels (3.14.14 as kernel.efi and 3.12.21 as oldkernel.efi).
To have a working system again i have to copy the oldkernel.efi (3.12.21) to kernel.efi so both my oldkernel.efi and kernel.efi are 3.12.21. Now i can boot and see everything just fine.

Anyone has any insight?


Last edited by Catanduva on Fri Aug 08, 2014 1:34 am; edited 1 time in total
Back to top
View user's profile Send private message
DONAHUE
Watchman
Watchman


Joined: 09 Dec 2006
Posts: 7651
Location: Goose Creek SC

PostPosted: Thu Aug 07, 2014 12:39 am    Post subject: Reply with quote

what video driver are you using? if the oem drivers, nvidia or fglrx, you need to emerge nvidia-drivers and nvidia-settings or ati-drivers, respectively, with the new kernel version set.
_________________
Defund the FCC.
Back to top
View user's profile Send private message
wraeth
Developer
Developer


Joined: 08 May 2007
Posts: 72
Location: Australia

PostPosted: Thu Aug 07, 2014 1:04 am    Post subject: Reply with quote

After a kernel upgrade, it's generally advisable to run `emerge -av @module-rebuild` and, sometimes, `emerge -av @x11-module-rebuild`.

You may also be able to find more details about what's going on by looking in /var/log/Xorg.0.log.
Back to top
View user's profile Send private message
Catanduva
Tux's lil' helper
Tux's lil' helper


Joined: 25 Dec 2008
Posts: 77
Location: Brazil

PostPosted: Thu Aug 07, 2014 9:36 am    Post subject: Reply with quote

DONAHUE wrote:
what video driver are you using? if the oem drivers, nvidia or fglrx, you need to emerge nvidia-drivers and nvidia-settings or ati-drivers, respectively, with the new kernel version set.


Intel drivers. it's a 3rd generation i5 processor.

wraeth wrote:
After a kernel upgrade, it's generally advisable to run `emerge -av @module-rebuild` and, sometimes, `emerge -av @x11-module-rebuild`.

You may also be able to find more details about what's going on by looking in /var/log/Xorg.0.log.


Did emerge -av @x11-module-rebuild and the modules were re-emerged, but nothing changed.

Here is the Xorg.0.log:

Code:
[    97.943]
X.Org X Server 1.15.0
Release Date: 2013-12-27
[    97.943] X Protocol Version 11, Revision 0
[    97.943] Build Operating System: Linux 3.12.13-gentoo x86_64 Gentoo
[    97.943] Current Operating System: Linux cris 3.14.14-gentoo #2 SMP Wed Aug 6 17:52:59 BRT 2014 x86_64
[    97.943] Kernel command line: root=/dev/sda2
[    97.943] Build Date: 15 May 2014  05:08:06PM
[    97.943] 
[    97.943] Current version of pixman: 0.32.4
[    97.943]    Before reporting problems, check http://wiki.x.org
        to make sure that you have the latest version.
[    97.943] Markers: (--) probed, (**) from config file, (==) default setting,
        (++) from command line, (!!) notice, (II) informational,
        (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[    97.943] (==) Log file: "/var/log/Xorg.0.log", Time: Thu Aug  7 06:30:23 2014
[    97.972] (==) Using config file: "/etc/X11/xorg.conf"
[    97.972] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[    98.006] (==) No Layout section.  Using the first Screen section.
[    98.006] (==) No screen section available. Using defaults.
[    98.006] (**) |-->Screen "Default Screen Section" (0)
[    98.006] (**) |   |-->Monitor "<default monitor>"
[    98.006] (==) No monitor specified for screen "Default Screen Section".
        Using a default monitor configuration.
[    98.006] (==) Automatically adding devices
[    98.006] (==) Automatically enabling devices
[    98.006] (==) Automatically adding GPU devices
[    98.017] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/encodings/".
[    98.017]    Entry deleted from font path.
[    98.017]    (Run 'mkfontdir' on "/usr/share/fonts/encodings/").
[    98.017] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/util/".
[    98.017]    Entry deleted from font path.
[    98.017]    (Run 'mkfontdir' on "/usr/share/fonts/util/").
[    98.017] (WW) The directory "/usr/share/fonts/misc/" does not exist.
[    98.017]    Entry deleted from font path.
[    98.017] (WW) The directory "/usr/share/fonts/TTF/" does not exist.
[    98.017]    Entry deleted from font path.
[    98.017] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[    98.017]    Entry deleted from font path.
[    98.017] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
[    98.017]    Entry deleted from font path.
[    98.017] (WW) The directory "/usr/share/fonts/100dpi/" does not exist.
[    98.017]    Entry deleted from font path.
[    98.017] (WW) The directory "/usr/share/fonts/75dpi/" does not exist.
[    98.017]    Entry deleted from font path.
[    98.017] (**) FontPath set to:
        /usr/share/fonts/corefonts/,
        /usr/share/fonts/dejavu/,
        /usr/share/fonts/dina/
[    98.017] (==) ModulePath set to "/usr/lib64/xorg/modules"
[    98.017] (II) The server relies on udev to provide the list of input devices.
        If no devices become available, reconfigure udev or disable AutoAddDevices.
[    98.017] (II) Loader magic: 0x807c60
[    98.017] (II) Module ABI versions:
[    98.017]    X.Org ANSI C Emulation: 0.4
[    98.017]    X.Org Video Driver: 15.0
[    98.017]    X.Org XInput driver : 20.0
[    98.017]    X.Org Server Extension : 8.0
[    98.017] (II) xfree86: Adding drm device (/dev/dri/card0)
[    98.017] (--) PCI:*(0:0:2:0) 8086:0152:1043:84ca rev 9, Mem @ 0xf7800000/4194304, 0xe0000000/268435456, I/O @ 0x0000f000/64
[    98.018] Initializing built-in extension Generic Event Extension
[    98.018] Initializing built-in extension SHAPE
[    98.018] Initializing built-in extension MIT-SHM
[    98.018] Initializing built-in extension XInputExtension
[    98.018] Initializing built-in extension XTEST
[    98.018] Initializing built-in extension BIG-REQUESTS
[    98.018] Initializing built-in extension SYNC
[    98.018] Initializing built-in extension XKEYBOARD
[    98.018] Initializing built-in extension XC-MISC
[    98.018] Initializing built-in extension XINERAMA
[    98.018] Initializing built-in extension XFIXES
[    98.018] Initializing built-in extension RENDER
[    98.018] Initializing built-in extension RANDR
[    98.018] Initializing built-in extension COMPOSITE
[    98.018] Initializing built-in extension DAMAGE
[    98.018] Initializing built-in extension MIT-SCREEN-SAVER
[    98.018] Initializing built-in extension DOUBLE-BUFFER
[    98.018] Initializing built-in extension RECORD
[    98.018] Initializing built-in extension DPMS
[    98.018] Initializing built-in extension Present
[    98.018] Initializing built-in extension DRI3
[    98.018] Initializing built-in extension X-Resource
[    98.018] Initializing built-in extension XVideo
[    98.018] Initializing built-in extension XVideo-MotionCompensation
[    98.018] Initializing built-in extension XFree86-VidModeExtension
[    98.018] Initializing built-in extension XFree86-DGA
[    98.018] Initializing built-in extension XFree86-DRI
[    98.018] Initializing built-in extension DRI2
[    98.018] (II) "glx" will be loaded by default.
[    98.018] (II) LoadModule: "glx"
[    98.050] (II) Loading /usr/lib64/xorg/modules/extensions/libglx.so
[    98.168] (II) Module glx: vendor="X.Org Foundation"
[    98.168]    compiled for 1.15.0, module version = 1.0.0
[    98.168]    ABI class: X.Org Server Extension, version 8.0
[    98.168] (==) AIGLX enabled
[    98.168] Loading extension GLX
[    98.168] (==) Matched intel as autoconfigured driver 0
[    98.168] (==) Matched intel as autoconfigured driver 1
[    98.168] (==) Matched modesetting as autoconfigured driver 2
[    98.168] (==) Matched fbdev as autoconfigured driver 3
[    98.168] (==) Matched vesa as autoconfigured driver 4
[    98.168] (==) Assigned the driver to the xf86ConfigLayout
[    98.168] (II) LoadModule: "intel"
[    98.180] (II) Loading /usr/lib64/xorg/modules/drivers/intel_drv.so
[    98.200] (II) Module intel: vendor="X.Org Foundation"
[    98.200]    compiled for 1.15.0, module version = 2.21.15
[    98.200]    Module class: X.Org Video Driver
[    98.200]    ABI class: X.Org Video Driver, version 15.0
[    98.200] (II) LoadModule: "modesetting"
[    98.201] (WW) Warning, couldn't open module modesetting
[    98.201] (II) UnloadModule: "modesetting"
[    98.201] (II) Unloading modesetting
[    98.201] (EE) Failed to load module "modesetting" (module does not exist, 0)
[    98.201] (II) LoadModule: "fbdev"
[    98.201] (WW) Warning, couldn't open module fbdev
[    98.201] (II) UnloadModule: "fbdev"
[    98.201] (II) Unloading fbdev
[    98.201] (EE) Failed to load module "fbdev" (module does not exist, 0)
[    98.201] (II) LoadModule: "vesa"
[    98.201] (WW) Warning, couldn't open module vesa
[    98.201] (II) UnloadModule: "vesa"
[    98.201] (II) Unloading vesa
[    98.201] (EE) Failed to load module "vesa" (module does not exist, 0)
[    98.201] (II) intel: Driver for Intel(R) Integrated Graphics Chipsets:
        i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G,
        915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM,
        Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33,
        GM45, 4 Series, G45/G43, Q45/Q43, G41, B43, HD Graphics,
        HD Graphics 2000, HD Graphics 3000, HD Graphics 2500,
        HD Graphics 4000, HD Graphics P4000, HD Graphics 4600,
        HD Graphics 5000, HD Graphics P4600/P4700, Iris(TM) Graphics 5100,
        HD Graphics 4400, HD Graphics 4200, Iris(TM) Pro Graphics 5200
[    98.201] (--) using VT number 7
[    98.203] (II) intel(0): Creating default Display subsection in Screen section
        "Default Screen Section" for depth/fbbpp 24/32
[    98.203] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[    98.203] (==) intel(0): RGB weight 888
[    98.203] (==) intel(0): Default visual is TrueColor
[    98.203] (--) intel(0): Integrated Graphics Chipset: Intel(R) HD Graphics 2500
[    98.203] (--) intel(0): CPU: x86-64, sse2, sse3, ssse3, sse4.1, sse4.2, avx
[    98.203] (**) intel(0): Framebuffer tiled
[    98.203] (**) intel(0): Pixmaps tiled
[    98.203] (**) intel(0): "Tear free" disabled
[    98.203] (**) intel(0): Forcing per-crtc-pixmaps? no
[    98.203] (II) intel(0): Output VGA1 has no monitor section
[    98.203] (II) intel(0): Output HDMI1 has no monitor section
[    98.203] (II) intel(0): Output HDMI2 has no monitor section
[    98.203] (II) intel(0): Output DP1 has no monitor section
[    98.203] (II) intel(0): Output DP2 has no monitor section
[    98.203] (==) intel(0): DPI set to (96, 96)
[    98.203] (II) Loading sub module "dri2"
[    98.203] (II) LoadModule: "dri2"
[    98.203] (II) Module "dri2" already built-in
[    98.203] (==) Depth 24 pixmap format is 32 bpp
[    98.206] (II) intel(0): SNA initialized with Ivybridge (gen7, gt1) backend
[    98.206] (==) intel(0): Backing store enabled
[    98.206] (==) intel(0): Silken mouse enabled
[    98.206] (II) intel(0): HW Cursor enabled
[    98.206] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[    98.207] (==) intel(0): DPMS enabled
[    98.207] (II) intel(0): [DRI2] Setup complete
[    98.207] (II) intel(0): [DRI2]   DRI driver: i965
[    98.207] (II) intel(0): direct rendering: DRI2 Enabled
[    98.207] (==) intel(0): hotplug detection: "enabled"
[    98.207] (--) RandR disabled
[    98.364] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[    98.364] (II) AIGLX: enabled GLX_ARB_create_context
[    98.364] (II) AIGLX: enabled GLX_ARB_create_context_profile
[    98.364] (II) AIGLX: enabled GLX_EXT_create_context_es2_profile
[    98.364] (II) AIGLX: enabled GLX_INTEL_swap_event
[    98.364] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[    98.364] (II) AIGLX: enabled GLX_EXT_framebuffer_sRGB
[    98.364] (II) AIGLX: enabled GLX_ARB_fbconfig_float
[    98.364] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[    98.364] (II) AIGLX: enabled GLX_ARB_create_context_robustness
[    98.364] (II) AIGLX: Loaded and initialized i965
[    98.364] (II) GLX: Initialized DRI2 GL provider for screen 0
[    98.666] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[    98.666] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    98.666] (II) LoadModule: "evdev"
[    98.666] (II) Loading /usr/lib64/xorg/modules/input/evdev_drv.so
[    98.700] (II) Module evdev: vendor="X.Org Foundation"
[    98.700]    compiled for 1.15.0, module version = 2.8.2
[    98.700]    Module class: X.Org XInput Driver
[    98.700]    ABI class: X.Org XInput driver, version 20.0
[    98.700] (II) Using input driver 'evdev' for 'Power Button'
[    98.700] (**) Power Button: always reports core events
[    98.700] (**) evdev: Power Button: Device: "/dev/input/event1"
[    98.700] (--) evdev: Power Button: Vendor 0 Product 0x1
[    98.700] (--) evdev: Power Button: Found keys
[    98.700] (II) evdev: Power Button: Configuring as keyboard
[    98.700] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input1/event1"
[    98.700] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[    98.700] (**) Option "xkb_rules" "evdev"
[    98.700] (**) Option "xkb_model" "pc104"
[    98.700] (**) Option "xkb_layout" "br"
[    98.700] (**) Option "xkb_variant" "abnt2"
[    98.742] (II) config/udev: Adding input device Video Bus (/dev/input/event2)
[    98.742] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[    98.742] (II) Using input driver 'evdev' for 'Video Bus'
[    98.742] (**) Video Bus: always reports core events
[    98.742] (**) evdev: Video Bus: Device: "/dev/input/event2"
[    98.742] (--) evdev: Video Bus: Vendor 0 Product 0x6
[    98.742] (--) evdev: Video Bus: Found keys
[    98.742] (II) evdev: Video Bus: Configuring as keyboard
[    98.742] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input2/event2"
[    98.742] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[    98.742] (**) Option "xkb_rules" "evdev"
[    98.742] (**) Option "xkb_model" "pc104"
[    98.742] (**) Option "xkb_layout" "br"
[    98.742] (**) Option "xkb_variant" "abnt2"
[    98.743] (II) config/udev: Adding input device Power Button (/dev/input/event0)
[    98.743] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    98.743] (II) Using input driver 'evdev' for 'Power Button'
[    98.743] (**) Power Button: always reports core events
[    98.743] (**) evdev: Power Button: Device: "/dev/input/event0"
[    98.743] (--) evdev: Power Button: Vendor 0 Product 0x1
[    98.743] (--) evdev: Power Button: Found keys
[    98.743] (II) evdev: Power Button: Configuring as keyboard
[    98.743] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0/event0"
[    98.743] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 8)
[    98.743] (**) Option "xkb_rules" "evdev"
[    98.743] (**) Option "xkb_model" "pc104"
[    98.743] (**) Option "xkb_layout" "br"
[    98.743] (**) Option "xkb_variant" "abnt2"
[    98.743] (II) config/udev: Adding drm device (/dev/dri/card0)
[    98.744] (II) config/udev: Adding input device USB gamepad            (/dev/input/event3)
[    98.744] (II) No input driver specified, ignoring this device.
[    98.744] (II) This device may have been added with another device file.
[    98.744] (II) config/udev: Adding input device USB gamepad            (/dev/input/js0)
[    98.744] (II) No input driver specified, ignoring this device.
[    98.744] (II) This device may have been added with another device file.
[    98.744] (II) config/udev: Adding input device Microsoft Wired Keyboard 600 (/dev/input/event4)
[    98.744] (**) Microsoft Wired Keyboard 600: Applying InputClass "evdev keyboard catchall"
[    98.744] (II) Using input driver 'evdev' for 'Microsoft Wired Keyboard 600'
[    98.744] (**) Microsoft Wired Keyboard 600: always reports core events
[    98.744] (**) evdev: Microsoft Wired Keyboard 600: Device: "/dev/input/event4"
[    98.744] (--) evdev: Microsoft Wired Keyboard 600: Vendor 0x45e Product 0x750
[    98.744] (--) evdev: Microsoft Wired Keyboard 600: Found keys
[    98.744] (II) evdev: Microsoft Wired Keyboard 600: Configuring as keyboard
[    98.744] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.5/2-1.5:1.0/0003:045E:0750.0002/input/input6/event4"
[    98.744] (II) XINPUT: Adding extended input device "Microsoft Wired Keyboard 600" (type: KEYBOARD, id 9)
[    98.744] (**) Option "xkb_rules" "evdev"
[    98.744] (**) Option "xkb_model" "pc104"
[    98.744] (**) Option "xkb_layout" "br"
[    98.744] (**) Option "xkb_variant" "abnt2"
[    98.745] (II) config/udev: Adding input device Microsoft Wired Keyboard 600 (/dev/input/event5)
[    98.745] (**) Microsoft Wired Keyboard 600: Applying InputClass "evdev keyboard catchall"
[    98.745] (II) Using input driver 'evdev' for 'Microsoft Wired Keyboard 600'
[    98.745] (**) Microsoft Wired Keyboard 600: always reports core events
[    98.745] (**) evdev: Microsoft Wired Keyboard 600: Device: "/dev/input/event5"
[    98.745] (II) evdev: Microsoft Wired Keyboard 600: Using mtdev for this device
[    98.745] (--) evdev: Microsoft Wired Keyboard 600: Vendor 0x45e Product 0x750
[    98.745] (--) evdev: Microsoft Wired Keyboard 600: Found 1 mouse buttons
[    98.745] (--) evdev: Microsoft Wired Keyboard 600: Found scroll wheel(s)
[    98.745] (--) evdev: Microsoft Wired Keyboard 600: Found relative axes
[    98.745] (--) evdev: Microsoft Wired Keyboard 600: Found absolute axes
[    98.745] (--) evdev: Microsoft Wired Keyboard 600: Found absolute multitouch axes
[    98.745] (--) evdev: Microsoft Wired Keyboard 600: Found x and y absolute axes
[    98.745] (--) evdev: Microsoft Wired Keyboard 600: Found keys
[    98.745] (II) evdev: Microsoft Wired Keyboard 600: Forcing relative x/y axes to exist.
[    98.745] (II) evdev: Microsoft Wired Keyboard 600: Configuring as mouse
[    98.745] (II) evdev: Microsoft Wired Keyboard 600: Configuring as keyboard
[    98.745] (II) evdev: Microsoft Wired Keyboard 600: Adding scrollwheel support
[    98.745] (**) evdev: Microsoft Wired Keyboard 600: YAxisMapping: buttons 4 and 5
[    98.745] (**) evdev: Microsoft Wired Keyboard 600: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[    98.745] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.5/2-1.5:1.1/0003:045E:0750.0003/input/input7/event5"
[    98.745] (II) XINPUT: Adding extended input device "Microsoft Wired Keyboard 600" (type: KEYBOARD, id 10)
[    98.745] (**) Option "xkb_rules" "evdev"
[    98.745] (**) Option "xkb_model" "pc104"
[    98.745] (**) Option "xkb_layout" "br"
[    98.745] (**) Option "xkb_variant" "abnt2"
[    98.746] (II) evdev: Microsoft Wired Keyboard 600: initialized for relative axes.
[    98.746] (WW) evdev: Microsoft Wired Keyboard 600: ignoring absolute axes.
[    98.746] (**) Microsoft Wired Keyboard 600: (accel) keeping acceleration scheme 1
[    98.746] (**) Microsoft Wired Keyboard 600: (accel) acceleration profile 0
[    98.746] (**) Microsoft Wired Keyboard 600: (accel) acceleration factor: 2.000
[    98.746] (**) Microsoft Wired Keyboard 600: (accel) acceleration threshold: 4
[    98.746] (II) config/udev: Adding input device Microsoft Wired Keyboard 600 (/dev/input/js1)
[    98.746] (II) No input driver specified, ignoring this device.
[    98.746] (II) This device may have been added with another device file.
[    98.746] (II) config/udev: Adding input device Microsoft  Microsoft Basic Optical Mouse v2.0  (/dev/input/event6)
[    98.746] (**) Microsoft  Microsoft Basic Optical Mouse v2.0 : Applying InputClass "evdev pointer catchall"
[    98.746] (II) Using input driver 'evdev' for 'Microsoft  Microsoft Basic Optical Mouse v2.0 '
[    98.746] (**) Microsoft  Microsoft Basic Optical Mouse v2.0 : always reports core events
[    98.746] (**) evdev: Microsoft  Microsoft Basic Optical Mouse v2.0 : Device: "/dev/input/event6"
[    98.746] (--) evdev: Microsoft  Microsoft Basic Optical Mouse v2.0 : Vendor 0x45e Product 0xcb
[    98.746] (--) evdev: Microsoft  Microsoft Basic Optical Mouse v2.0 : Found 3 mouse buttons
[    98.746] (--) evdev: Microsoft  Microsoft Basic Optical Mouse v2.0 : Found scroll wheel(s)
[    98.746] (--) evdev: Microsoft  Microsoft Basic Optical Mouse v2.0 : Found relative axes
[    98.746] (--) evdev: Microsoft  Microsoft Basic Optical Mouse v2.0 : Found x and y relative axes
[    98.746] (II) evdev: Microsoft  Microsoft Basic Optical Mouse v2.0 : Configuring as mouse
[    98.746] (II) evdev: Microsoft  Microsoft Basic Optical Mouse v2.0 : Adding scrollwheel support
[    98.746] (**) evdev: Microsoft  Microsoft Basic Optical Mouse v2.0 : YAxisMapping: buttons 4 and 5
[    98.747] (**) evdev: Microsoft  Microsoft Basic Optical Mouse v2.0 : EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[    98.747] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.6/2-1.6:1.0/0003:045E:00CB.0005/input/input9/event6"
[    98.747] (II) XINPUT: Adding extended input device "Microsoft  Microsoft Basic Optical Mouse v2.0 " (type: MOUSE, id 11)
[    98.747] (II) evdev: Microsoft  Microsoft Basic Optical Mouse v2.0 : initialized for relative axes.
[    98.747] (**) Microsoft  Microsoft Basic Optical Mouse v2.0 : (accel) keeping acceleration scheme 1
[    98.747] (**) Microsoft  Microsoft Basic Optical Mouse v2.0 : (accel) acceleration profile 0
[    98.747] (**) Microsoft  Microsoft Basic Optical Mouse v2.0 : (accel) acceleration factor: 2.000
[    98.747] (**) Microsoft  Microsoft Basic Optical Mouse v2.0 : (accel) acceleration threshold: 4
[    98.747] (II) config/udev: Adding input device Microsoft  Microsoft Basic Optical Mouse v2.0  (/dev/input/mouse0)
[    98.747] (II) No input driver specified, ignoring this device.
[    98.747] (II) This device may have been added with another device file.
[   118.992] (II) evdev: Microsoft  Microsoft Basic Optical Mouse v2.0 : Close
[   118.992] (II) UnloadModule: "evdev"
[   118.992] (II) evdev: Microsoft Wired Keyboard 600: Close
[   118.992] (II) UnloadModule: "evdev"
[   118.992] (II) evdev: Microsoft Wired Keyboard 600: Close
[   118.992] (II) UnloadModule: "evdev"
[   118.992] (II) evdev: Power Button: Close
[   118.992] (II) UnloadModule: "evdev"
[   118.992] (II) evdev: Video Bus: Close
[   118.992] (II) UnloadModule: "evdev"
[   118.992] (II) evdev: Power Button: Close
[   118.993] (II) UnloadModule: "evdev"
[   119.392] (EE) Server terminated successfully (0). Closing log file.
Back to top
View user's profile Send private message
wraeth
Developer
Developer


Joined: 08 May 2007
Posts: 72
Location: Australia

PostPosted: Thu Aug 07, 2014 9:54 am    Post subject: Reply with quote

This looks like a successful run of Xorg - it loaded your graphics driver and did everything normally, and terminated successfully.

Are there any errors in your dmesg perhaps?
Back to top
View user's profile Send private message
Catanduva
Tux's lil' helper
Tux's lil' helper


Joined: 25 Dec 2008
Posts: 77
Location: Brazil

PostPosted: Thu Aug 07, 2014 7:21 pm    Post subject: Reply with quote

Didn't see any errors.
Here's part of dmesg:

Code:

[    0.401906] SCSI subsystem initialized
[    0.401959] libata version 3.00 loaded.
[    0.401961] ACPI: bus type USB registered
[    0.401996] usbcore: registered new interface driver usbfs
[    0.402015] usbcore: registered new interface driver hub
[    0.402038] usbcore: registered new device driver usb
[    0.402127] Advanced Linux Sound Architecture Driver Initialized.
[    0.402129] PCI: Using ACPI for IRQ routing
[    0.402131] PCI: pci_cache_line_size set to 64 bytes
[    0.402168] e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff]
[    0.402169] e820: reserve RAM buffer [mem 0x0c554018-0x0fffffff]
[    0.402170] e820: reserve RAM buffer [mem 0x0c565018-0x0fffffff]
[    0.402171] e820: reserve RAM buffer [mem 0x40004000-0x43ffffff]
[    0.402172] e820: reserve RAM buffer [mem 0xbcf9e000-0xbfffffff]
[    0.402173] e820: reserve RAM buffer [mem 0xbcfa3000-0xbfffffff]
[    0.402175] e820: reserve RAM buffer [mem 0xbdc81000-0xbfffffff]
[    0.402176] e820: reserve RAM buffer [mem 0xbe000000-0xbfffffff]
[    0.402177] e820: reserve RAM buffer [mem 0x11ee00000-0x11fffffff]
[    0.402288] Switched to clocksource hpet
[    0.406249] pnp: PnP ACPI init
[    0.406255] ACPI: bus type PNP registered
[    0.406331] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved
[    0.406335] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.406344] pnp 00:01: [dma 4]
[    0.406370] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
[    0.406401] pnp 00:02: Plug and Play ACPI device, IDs INT0800 (active)
[    0.406478] pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active)
[    0.406522] system 00:04: [io  0x0680-0x069f] has been reserved
[    0.406525] system 00:04: [io  0x0200-0x020f] has been reserved
[    0.406527] system 00:04: [io  0xffff] has been reserved
[    0.406529] system 00:04: [io  0xffff] has been reserved
[    0.406531] system 00:04: [io  0x0400-0x0453] could not be reserved
[    0.406533] system 00:04: [io  0x0458-0x047f] has been reserved
[    0.406536] system 00:04: [io  0x0500-0x057f] has been reserved
[    0.406538] system 00:04: [io  0x164e-0x164f] has been reserved
[    0.406540] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.406577] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.406624] system 00:06: [io  0x0454-0x0457] has been reserved
[    0.406627] system 00:06: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[    0.406710] system 00:07: [io  0x0a00-0x0a1f] has been reserved
[    0.406712] system 00:07: [io  0x0290-0x029f] has been reserved
[    0.406715] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.406989] system 00:08: [io  0x04d0-0x04d1] has been reserved
[    0.406993] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.407027] pnp 00:09: Plug and Play ACPI device, IDs PNP0c04 (active)
[    0.407163] pnp 00:0a: [dma 0 disabled]
[    0.407210] pnp 00:0a: Plug and Play ACPI device, IDs PNP0501 (active)
[    0.407377] system 00:0b: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    0.407380] system 00:0b: [mem 0xfed10000-0xfed17fff] has been reserved
[    0.407383] system 00:0b: [mem 0xfed18000-0xfed18fff] has been reserved
[    0.407385] system 00:0b: [mem 0xfed19000-0xfed19fff] has been reserved
[    0.407387] system 00:0b: [mem 0xf8000000-0xfbffffff] has been reserved
[    0.407390] system 00:0b: [mem 0xfed20000-0xfed3ffff] has been reserved
[    0.407392] system 00:0b: [mem 0xfed90000-0xfed93fff] has been reserved
[    0.407394] system 00:0b: [mem 0xfed45000-0xfed8ffff] has been reserved
[    0.407397] system 00:0b: [mem 0xff000000-0xffffffff] has been reserved
[    0.407399] system 00:0b: [mem 0xfee00000-0xfeefffff] could not be reserved
[    0.407401] system 00:0b: [mem 0xdf200000-0xdf200fff] has been reserved
[    0.407404] system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.407520] system 00:0c: [mem 0x20000000-0x201fffff] has been reserved
[    0.407523] system 00:0c: [mem 0x40004000-0x40004fff] has been reserved
[    0.407526] system 00:0c: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.407540] pnp: PnP ACPI: found 13 devices
[    0.407541] ACPI: bus type PNP unregistered
[    0.412112] pci 0000:00:01.0: PCI bridge to [bus 01]
[    0.412118] pci 0000:00:1c.0: PCI bridge to [bus 02]
[    0.412135] pci 0000:00:1c.4: PCI bridge to [bus 03]
[    0.412138] pci 0000:00:1c.4:   bridge window [io  0xe000-0xefff]
[    0.412145] pci 0000:00:1c.4:   bridge window [mem 0xf0000000-0xf00fffff 64bit pref]
[    0.412151] pci 0000:00:1e.0: PCI bridge to [bus 04]
[    0.412162] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
[    0.412163] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
[    0.412164] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[    0.412165] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff]
[    0.412166] pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff]
[    0.412167] pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff]
[    0.412169] pci_bus 0000:00: resource 10 [mem 0x000dc000-0x000dffff]
[    0.412170] pci_bus 0000:00: resource 11 [mem 0xdf200000-0xfeafffff]
[    0.412171] pci_bus 0000:03: resource 0 [io  0xe000-0xefff]
[    0.412172] pci_bus 0000:03: resource 2 [mem 0xf0000000-0xf00fffff 64bit pref]
[    0.412174] pci_bus 0000:04: resource 4 [io  0x0000-0x0cf7]
[    0.412175] pci_bus 0000:04: resource 5 [io  0x0d00-0xffff]
[    0.412176] pci_bus 0000:04: resource 6 [mem 0x000a0000-0x000bffff]
[    0.412177] pci_bus 0000:04: resource 7 [mem 0x000d0000-0x000d3fff]
[    0.412178] pci_bus 0000:04: resource 8 [mem 0x000d4000-0x000d7fff]
[    0.412179] pci_bus 0000:04: resource 9 [mem 0x000d8000-0x000dbfff]
[    0.412180] pci_bus 0000:04: resource 10 [mem 0x000dc000-0x000dffff]
[    0.412182] pci_bus 0000:04: resource 11 [mem 0xdf200000-0xfeafffff]
[    0.412201] NET: Registered protocol family 2
[    0.412280] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
[    0.412336] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
[    0.412433] TCP: Hash tables configured (established 32768 bind 32768)
[    0.412450] TCP: reno registered
[    0.412452] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[    0.412466] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[    0.412507] NET: Registered protocol family 1
[    0.412526] pci 0000:00:02.0: BIOS left Intel GPU interrupts enabled; disabling
[    0.412539] pci 0000:00:02.0: Boot video device
[    0.412610] pci 0000:00:14.0: CONFIG_USB_XHCI_HCD is turned off, defaulting to EHCI.
[    0.412613] pci 0000:00:14.0: USB 3.0 devices will work at USB 2.0 speeds.
[    0.444362] PCI: CLS 64 bytes, default 64
[    0.444390] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    0.444393] software IO TLB [mem 0xb8f9e000-0xbcf9e000] (64MB) mapped at [ffff8800b8f9e000-ffff8800bcf9dfff]
[    0.444517] RAPL PMU detected, hw unit 2^-16 Joules, API unit is 2^-32 Joules, 3 fixed counters 163840 ms ovfl timer
[    0.445073] futex hash table entries: 1024 (order: 4, 65536 bytes)
[    0.447885] msgmni has been set to 6763
[    0.448169] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[    0.448172] io scheduler noop registered
[    0.448173] io scheduler deadline registered
[    0.448209] io scheduler cfq registered (default)
[    0.448582] Non-volatile memory driver v1.3
[    0.448600] Linux agpgart interface v0.103
[    0.448741] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
[    0.448745] ACPI: Power Button [PWRB]
[    0.448787] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[    0.448790] ACPI: Power Button [PWRF]
[    0.448860] ACPI: Fan [FAN0] (off)
[    0.448893] ACPI: Fan [FAN1] (off)
[    0.448926] ACPI: Fan [FAN2] (off)
[    0.448958] ACPI: Fan [FAN3] (off)
[    0.448992] ACPI: Fan [FAN4] (off)
[    0.455470] Monitor-Mwait will be used to enter C-1 state
[    0.455473] Monitor-Mwait will be used to enter C-2 state
[    0.455475] Monitor-Mwait will be used to enter C-3 state
[    0.455480] ACPI: acpi_idle registered with cpuidle
[    0.461774] thermal LNXTHERM:00: registered as thermal_zone0
[    0.461778] ACPI: Thermal Zone [TZ00] (28 C)
[    0.462045] thermal LNXTHERM:01: registered as thermal_zone1
[    0.462049] ACPI: Thermal Zone [TZ01] (30 C)
[    0.462231] [drm] Initialized drm 1.1.0 20060810
[    0.463075] [drm] Memory usable by graphics device = 2048M
[    0.469450] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    0.469453] [drm] Driver supports precise vblank timestamp query.
[    0.469497] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[    0.484384] [drm] Wrong MCH_SSKPD value: 0x20100406
[    0.484387] [drm] This can cause pipe underruns and display issues.
[    0.484388] [drm] Please upgrade your BIOS to fix this.
[    0.489450] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[    0.489733] acpi device:47: registered as cooling_device9
[    0.489870] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input2
[    0.489966] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[    0.491655] brd: module loaded
[    0.492413] loop: module loaded
[    0.492513] ata_piix 0000:00:1f.2: version 2.13
[    0.492571] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
[    0.643785] scsi0 : ata_piix
[    0.643932] scsi1 : ata_piix
[    0.644028] ata1: SATA max UDMA/133 cmd 0xf110 ctl 0xf100 bmdma 0xf0d0 irq 19
[    0.644033] ata2: SATA max UDMA/133 cmd 0xf0f0 ctl 0xf0e0 bmdma 0xf0d8 irq 19
[    0.644103] ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
[    0.794234] ata_piix 0000:00:1f.5: SCR access via SIDPR is available but doesn't work
[    0.794878] scsi2 : ata_piix
[    0.795049] scsi3 : ata_piix
[    0.795160] ata3: SATA max UDMA/133 cmd 0xf0b0 ctl 0xf0a0 bmdma 0xf070 irq 19
[    0.795163] ata4: SATA max UDMA/133 cmd 0xf090 ctl 0xf080 bmdma 0xf078 irq 19
[    0.795323] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[    0.795330] r8169 0000:03:00.0: can't disable ASPM; OS doesn't have ASPM control
[    0.795754] r8169 0000:03:00.0 eth0: RTL8168f/8111f at 0xffffc9000001e000, 10:bf:48:7d:1c:be, XID 08000800 IRQ 16
[    0.795758] r8169 0000:03:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[    0.795856] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.795858] ehci-pci: EHCI PCI platform driver
[    0.795924] ehci-pci 0000:00:1a.0: EHCI Host Controller
[    0.795966] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[    0.795978] ehci-pci 0000:00:1a.0: debug port 2
[    0.799864] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[    0.799874] ehci-pci 0000:00:1a.0: irq 23, io mem 0xf7c17000
[    0.805222] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[    0.805267] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    0.805270] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.805272] usb usb1: Product: EHCI Host Controller
[    0.805274] usb usb1: Manufacturer: Linux 3.14.14-gentoo ehci_hcd
[    0.805276] usb usb1: SerialNumber: 0000:00:1a.0
[    0.805663] hub 1-0:1.0: USB hub found
[    0.805673] hub 1-0:1.0: 2 ports detected
[    0.805806] ehci-pci 0000:00:1d.0: EHCI Host Controller
[    0.805987] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    0.805999] ehci-pci 0000:00:1d.0: debug port 2
[    0.809903] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[    0.809907] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf7c16000
[    0.815223] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[    0.815259] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[    0.815262] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.815265] usb usb2: Product: EHCI Host Controller
[    0.815267] usb usb2: Manufacturer: Linux 3.14.14-gentoo ehci_hcd
[    0.815269] usb usb2: SerialNumber: 0000:00:1d.0
[    0.815636] hub 2-0:1.0: USB hub found
[    0.815646] hub 2-0:1.0: 2 ports detected
[    0.815841] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    0.815858] uhci_hcd: USB Universal Host Controller Interface driver
[    0.816061] usbcore: registered new interface driver usblp
[    0.816213] usbcore: registered new interface driver usb-storage
[    0.816766] i8042: PNP: No PS/2 controller found. Probing ports directly.
[    0.818966] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.818975] serio: i8042 AUX port at 0x60,0x64 irq 12
[    0.819148] mousedev: PS/2 mouse device common for all mice
[    0.819357] rtc_cmos 00:05: RTC can wake from S4
[    0.819486] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
[    0.819514] rtc_cmos 00:05: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[    0.819604] ACPI Warning: SystemIO range 0x000000000000f040-0x000000000000f05f conflicts with OpRegion 0x000000000000f040-0x000000000000f04f (\_SB_.PCI0.SBUS.SMBI) (20131218/utaddress-258)
[    0.819611] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    0.819690] hidraw: raw HID events driver (C) Jiri Kosina
[    0.819987] usbcore: registered new interface driver usbhid
[    0.819989] usbhid: USB HID core driver
[    0.820039] snd_hda_intel 0000:00:1b.0: enabling device (0000 -> 0002)
[    0.820218] TCP: cubic registered
[    0.820220] Initializing XFRM netlink socket
[    0.820416] NET: Registered protocol family 10
[    0.820551] sit: IPv6 over IPv4 tunneling driver
[    0.820686] NET: Registered protocol family 17
[    0.820695] Key type dns_resolver registered
[    0.821643] ALSA device list:
[    0.821645]   No soundcards found.
[    1.107224] usb 1-1: new high-speed USB device number 2 using ehci-pci
[    1.221627] usb 1-1: New USB device found, idVendor=8087, idProduct=0024
[    1.221635] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.222299] hub 1-1:1.0: USB hub found
[    1.222499] hub 1-1:1.0: 6 ports detected
[    1.325136] usb 2-1: new high-speed USB device number 2 using ehci-pci
[    1.439559] usb 2-1: New USB device found, idVendor=8087, idProduct=0024
[    1.439567] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.440108] hub 2-1:1.0: USB hub found
[    1.440159] hub 2-1:1.0: 6 ports detected
[    1.446084] tsc: Refined TSC clocksource calibration: 3092.973 MHz
[    1.514174] usb 1-1.2: new low-speed USB device number 3 using ehci-pci
[    1.602647] usb 1-1.2: New USB device found, idVendor=0810, idProduct=e101
[    1.602655] usb 1-1.2: New USB device strings: Mfr=0, Product=2, SerialNumber=0
[    1.602660] usb 1-1.2: Product: USB gamepad           
[    1.606562] input: USB gamepad            as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/0003:0810:E101.0001/input/input5
[    1.606972] hid-generic 0003:0810:E101.0001: input,hidraw0: USB HID v1.10 Joystick [USB gamepad           ] on usb-0000:00:1a.0-1.2/input0
[    1.650061] ata2.00: failed to resume link (SControl 30)
[    1.714129] usb 2-1.5: new low-speed USB device number 3 using ehci-pci
[    1.807848] usb 2-1.5: New USB device found, idVendor=045e, idProduct=0750
[    1.807856] usb 2-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    1.807861] usb 2-1.5: Product: Wired Keyboard 600
[    1.807865] usb 2-1.5: Manufacturer: Microsoft
[    1.812525] input: Microsoft Wired Keyboard 600 as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.5/2-1.5:1.0/0003:045E:0750.0002/input/input6
[    1.812889] hid-generic 0003:045E:0750.0002: input,hidraw1: USB HID v1.11 Keyboard [Microsoft Wired Keyboard 600] on usb-0000:00:1d.0-1.5/input0
[    1.819263] input: Microsoft Wired Keyboard 600 as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.5/2-1.5:1.1/0003:045E:0750.0003/input/input7
[    1.819825] hid-generic 0003:045E:0750.0003: input,hidraw2: USB HID v1.11 Device [Microsoft Wired Keyboard 600] on usb-0000:00:1d.0-1.5/input1
[    1.882092] usb 2-1.6: new low-speed USB device number 4 using ehci-pci
[    1.954999] ata1.01: failed to resume link (SControl 0)
[    1.971810] usb 2-1.6: New USB device found, idVendor=045e, idProduct=00cb
[    1.971818] usb 2-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    1.971824] usb 2-1.6: Product: Microsoft Basic Optical Mouse v2.0
[    1.971828] usb 2-1.6: Manufacturer: Microsoft
[    1.976085] input: Microsoft  Microsoft Basic Optical Mouse v2.0  as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.6/2-1.6:1.0/0003:045E:00CB.0004/input/input8
[    1.976607] hid-generic 0003:045E:00CB.0004: input,hidraw3: USB HID v1.11 Mouse [Microsoft  Microsoft Basic Optical Mouse v2.0 ] on usb-0000:00:1d.0-1.6/input0
[    2.000248] [drm] Enabling RC6 states: RC6 on, RC6p on, RC6pp off
[    2.106023] ata1.00: SATA link up 3.0 Gbps (SStatus 123 SControl 330)
[    2.106041] ata1.01: SATA link down (SStatus 0 SControl 0)
[    2.109895] ata1.00: ATA-8: WDC WD10EARS-00Y5B1, 80.00A80, max UDMA/133
[    2.109903] ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[    2.116369] ata1.00: configured for UDMA/133
[    2.116570] scsi 0:0:0:0: Direct-Access     ATA      WDC WD10EARS-00Y 80.0 PQ: 0 ANSI: 5
[    2.117272] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[    2.117281] sd 0:0:0:0: [sda] 4096-byte physical blocks
[    2.117469] sd 0:0:0:0: [sda] Write Protect is off
[    2.117477] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    2.117521] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.164957]  sda: sda1 sda2 sda3 sda4
[    2.166159] sd 0:0:0:0: [sda] Attached SCSI disk
[    2.446038] Switched to clocksource tsc
[    2.656851] ata2.01: failed to resume link (SControl 0)
[    2.667725] ata2.00: SATA link down (SStatus 4 SControl 30)
[    2.667742] ata2.01: SATA link down (SStatus 0 SControl 0)
[    2.687996] EXT4-fs (sda2): couldn't mount as ext3 due to feature incompatibilities
[    2.688314] EXT4-fs (sda2): couldn't mount as ext2 due to feature incompatibilities
[    2.715575] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
[    2.715583] VFS: Mounted root (ext4 filesystem) readonly on device 8:2.
[    2.749068] devtmpfs: mounted
[    2.749640] Freeing unused kernel memory: 856K (ffffffff8187e000 - ffffffff81954000)
[    2.749644] Write protecting the kernel read-only data: 8192k
[    2.751456] Freeing unused kernel memory: 788K (ffff88000e53b000 - ffff88000e600000)
[    2.752032] Freeing unused kernel memory: 244K (ffff88000e7c3000 - ffff88000e800000)
[    3.101213] random: nonblocking pool is initialized
[    3.420455] kbd_mode (915) used greatest stack depth: 5136 bytes left
[    3.443223] loadkeys (916) used greatest stack depth: 5032 bytes left
[    3.443424] init-early.sh (913) used greatest stack depth: 4464 bytes left
[    4.281765] systemd-udevd[1081]: starting version 215
[    7.181073] EXT4-fs (sda2): re-mounted. Opts: (null)
[    7.346835] Adding 4095996k swap on /dev/sda4.  Priority:-1 extents:1 across:4095996k FS
[    7.433948] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
[    8.351076] r8169 0000:03:00.0 eth0: unable to load firmware patch rtl_nic/rtl8168f-1.fw (-2)
[    8.359459] r8169 0000:03:00.0 eth0: link down
[    8.359477] r8169 0000:03:00.0 eth0: link down
[    8.359502] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   10.641071] r8169 0000:03:00.0 eth0: link up
[   10.641082] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready

Back to top
View user's profile Send private message
DONAHUE
Watchman
Watchman


Joined: 09 Dec 2006
Posts: 7651
Location: Goose Creek SC

PostPosted: Thu Aug 07, 2014 9:58 pm    Post subject: Reply with quote

if the machine is a laptop- there was a problem with brightness and contrast keys working backward- may have recurred in the 14.4 kernel- could be found by cycling
could it be hibernating/suspending?
If kernel versions are misconstrued please adjust
Code:
awk '/Graphics/,/CONFIG_SOUND/' /usr/src/linux-3.12.21-gentoo/.config | wgetpaste
awk '/Graphics/,/CONFIG_SOUND/' /usr/src/linux-3.14.4-gentoo/.config | wgetpaste
lspci -k | wgetpaste
post the url's returned

Edit to reduce data to only the Graphics support section
_________________
Defund the FCC.


Last edited by DONAHUE on Fri Aug 08, 2014 1:02 am; edited 1 time in total
Back to top
View user's profile Send private message
Catanduva
Tux's lil' helper
Tux's lil' helper


Joined: 25 Dec 2008
Posts: 77
Location: Brazil

PostPosted: Thu Aug 07, 2014 10:15 pm    Post subject: Reply with quote

DONAHUE wrote:
if the machine is a laptop- there was a problem with brightness and contrast keys working backward- may have recurred in the 14.4 kernel- could be found by cycling
could it be hibernating/suspending?
If kernel versions are misconstrued please adjust
Code:
t
awk '/Graphics/,/CONFIG_LOGO_LINUX_CLUT224/' /usr/src/linux-3.14.4-gentoo/.config | wgetpaste
lspci -k | wgetpaste
post the url's returned


It's not a laptop.

Here:
http://bpaste.net/show/573788/
http://bpaste.net/show/573790/
http://bpaste.net/show/573791/
Back to top
View user's profile Send private message
DONAHUE
Watchman
Watchman


Joined: 09 Dec 2006
Posts: 7651
Location: Goose Creek SC

PostPosted: Fri Aug 08, 2014 12:58 am    Post subject: Reply with quote

Graphics support sections are identical for the two kernels and look good to me, consistent with xorg.log and dmesg looking good.
eselect kernel set <the 3.14.4 >
Hail Mary
Code:
emerge xorg-server xf86-video-intel xf86-input-evdev

Might consider keywording for a 3.16.0 kernel if the prayer is unanswered
_________________
Defund the FCC.
Back to top
View user's profile Send private message
Catanduva
Tux's lil' helper
Tux's lil' helper


Joined: 25 Dec 2008
Posts: 77
Location: Brazil

PostPosted: Fri Aug 08, 2014 1:16 am    Post subject: Reply with quote

DONAHUE wrote:
Graphics support sections are identical for the two kernels and look good to me, consistent with xorg.log and dmesg looking good.
eselect kernel set <the 3.14.4 >
Hail Mary
Code:
emerge xorg-server xf86-video-intel xf86-input-evdev

Might consider keywording for a 3.16.0 kernel if the prayer is unanswered


It can`t be anything with xorg because i get the black screen right after the BIOS/UEFI boot screen.
But i tried anyway and nothing changed. :lol:

I think i'll block 3.14.14 and wait for a newer version.
Back to top
View user's profile Send private message
DONAHUE
Watchman
Watchman


Joined: 09 Dec 2006
Posts: 7651
Location: Goose Creek SC

PostPosted: Fri Aug 08, 2014 1:24 am    Post subject: Reply with quote

Quote:
i get the black screen right after the BIOS/UEFI boot screen.
perhaps the efi_fb versus kms incompatibility has recurred. might try disabling one, the other, both in the kernel.
_________________
Defund the FCC.
Back to top
View user's profile Send private message
Catanduva
Tux's lil' helper
Tux's lil' helper


Joined: 25 Dec 2008
Posts: 77
Location: Brazil

PostPosted: Fri Aug 08, 2014 1:33 am    Post subject: Reply with quote

DONAHUE wrote:
Quote:
i get the black screen right after the BIOS/UEFI boot screen.
perhaps the efi_fb versus kms incompatibility has recurred. might try disabling one, the other, both in the kernel.


THANKWS!@#!@@!D
Disabling FB_EFI solved the issue.
Back to top
View user's profile Send private message
Display posts from previous:   
Reply to topic    Gentoo Forums Forum Index Kernel & Hardware All times are GMT
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum