Gentoo Forums
Gentoo Forums
Gentoo Forums
Quick Search: in
WiFi connection fails with NetworkManager
View unanswered posts
View posts from last 24 hours

 
Reply to topic    Gentoo Forums Forum Index Networking & Security
View previous topic :: View next topic  
Author Message
philip
Guru
Guru


Joined: 10 Jun 2003
Posts: 535
Location: Sweden

PostPosted: Mon Jun 30, 2014 8:46 pm    Post subject: WiFi connection fails with NetworkManager Reply with quote

I have just installed net-misc/networkmanager and kde-misc/networkmanagement

My fixed line ethernet i/f comes up nicely. But my WLAN does not connect.
The WLAN HW works since my access point can be seen by the SW.
It seems the authentication never succeeds.

Am I missing any support for encryption in the kernel?

# tail -n 100 /var/log/wpa_supplicant.log
says:

Code:
wlp3s0:    selected BSS 08:60:6e:cf:9a:32 ssid='my_home_wifi'
wlp3s0: Request association: reassociate: 0  selected: 08:60:6e:cf:9a:32  bssid: 00:00:00:00:00:00  pending: 00:00:00:00:00:00  wpa_state: DISCONNECTED
wlp3s0: Automatic auth_alg selection: 0x1
wlp3s0: Overriding auth_alg selection: 0x1
RSN: PMKSA cache search - network_ctx=(nil) try_opportunistic=0
RSN: Search for BSSID 08:60:6e:cf:9a:32
RSN: No PMKSA cache entry found
wlp3s0: RSN: using IEEE 802.11i/D9.0
wlp3s0: WPA: Selected cipher suites: group 16 pairwise 16 key_mgmt 2 proto 2
wlp3s0: WPA: clearing AP WPA IE
WPA: set AP RSN IE - hexdump(len=22): 30 14 01 00 00 0f ac 04 01 00 00 0f ac 04 01 00 00 0f ac 02 00 00
wlp3s0: WPA: using GTK CCMP
wlp3s0: WPA: using PTK CCMP
wlp3s0: WPA: using KEY_MGMT WPA-PSK
WPA: Set own WPA IE default - hexdump(len=22): 30 14 01 00 00 0f ac 04 01 00 00 0f ac 04 01 00 00 0f ac 02 00 00
wlp3s0: Cancelling scan request
wlp3s0: SME: Trying to authenticate with 08:60:6e:cf:9a:32 (SSID='norshill' freq=5180 MHz)
CTRL_IFACE monitor send - hexdump(len=21): 2f 74 6d 70 2f 77 70 61 5f 63 74 72 6c 5f 33 30 34 30 2d 32 00
CTRL_IFACE monitor send - hexdump(len=21): 2f 74 6d 70 2f 77 70 61 5f 63 74 72 6c 5f 32 33 37 38 2d 31 00
wlp3s0: No keys have been configured - skip key clearing
wlp3s0: State: DISCONNECTED -> AUTHENTICATING
EAPOL: External notification - EAP success=0
EAPOL: Supplicant port status: Unauthorized
EAPOL: External notification - EAP fail=0
EAPOL: Supplicant port status: Unauthorized
EAPOL: External notification - portControl=Auto
EAPOL: Supplicant port status: Unauthorized
nl80211: Authenticate (ifindex=5)
  * bssid=08:60:6e:cf:9a:32
  * freq=5180
  * SSID - hexdump_ascii(len=8):
     6e 6f 72 73 68 69 6c 6c                           norshill       
  * IEs - hexdump(len=0): [NULL]
  * Auth Type 0
nl80211: Authentication request send successfully
RSN: Ignored PMKID candidate without preauth flag
RSN: Ignored PMKID candidate without preauth flag
nl80211: Event message available
nl80211: New station 08:60:6e:cf:9a:32
RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP])
RTM_NEWLINK, IFLA_IFNAME: Interface 'wlp3s0' added
nl80211: if_removed already cleared - ignore event
nl80211: Event message available
nl80211: Delete station 08:60:6e:cf:9a:32
nl80211: Event message available
nl80211: MLME event 37; timeout with 08:60:6e:cf:9a:32
wlp3s0: Event AUTH_TIMED_OUT (14) received
wlp3s0: SME: Authentication timed out
Added BSSID 08:60:6e:cf:9a:32 into blacklist
wlp3s0: Another BSS in this ESS has been seen; try it next
BSSID 08:60:6e:cf:9a:32 blacklist count incremented to 2
wlp3s0: Blacklist count 91 --> request scan in 10000 ms
wlp3s0: Setting scan request: 10 sec 0 usec
wlp3s0: State: AUTHENTICATING -> DISCONNECTED
wpa_driver_nl80211_set_operstate: operstate 0->0 (DORMANT)
netlink: Operstate: linkmode=-1, operstate=5
EAPOL: External notification - portEnabled=0
EAPOL: Supplicant port status: Unauthorized
EAPOL: External notification - portValid=0
EAPOL: Supplicant port status: Unauthorized
EAPOL: External notification - EAP success=0
EAPOL: Supplicant port status: Unauthorized
CTRL_IFACE monitor detached - hexdump(len=21): 2f 74 6d 70 2f 77 70 61 5f 63 74 72 6c 5f 33 30 34 30 2d 32 00
RTM_NEWLINK: operstate=0 ifi_flags=0x1002 ()
nl80211: Interface down
wlp3s0: Event INTERFACE_DISABLED (30) received
wlp3s0: Interface was disabled
wlp3s0: State: DISCONNECTED -> DISCONNECTED
wpa_driver_nl80211_set_operstate: operstate 0->0 (DORMANT)
netlink: Operstate: linkmode=-1, operstate=5
EAPOL: External notification - portEnabled=0
EAPOL: Supplicant port status: Unauthorized
EAPOL: External notification - portValid=0
EAPOL: Supplicant port status: Unauthorized
wlp3s0: State: DISCONNECTED -> INTERFACE_DISABLED
RTM_NEWLINK, IFLA_IFNAME: Interface 'wlp3s0' added
nl80211: if_removed already cleared - ignore event
l2_packet_receive - recvfrom: Network is down
wlp3s0: Removing interface wlp3s0
wlp3s0: Request to deauthenticate - bssid=00:00:00:00:00:00 pending_bssid=00:00:00:00:00:00 reason=3 state=INTERFACE_DISABLED
wlp3s0: No keys have been configured - skip key clearing
wlp3s0: No keys have been configured - skip key clearing
Removed BSSID 08:60:6e:cf:9a:32 from blacklist (clear)
Removed BSSID 74:d0:2b:d3:3e:2c from blacklist (clear)
wlp3s0: BSS: Remove id 0 BSSID 74:d0:2b:d3:3e:2c SSID ''my_home_wifi' due to wpa_bss_flush
CTRL_IFACE monitor send - hexdump(len=21): 2f 74 6d 70 2f 77 70 61 5f 63 74 72 6c 5f 32 33 37 38 2d 31 00
wlp3s0: BSS: Remove id 57 BSSID 08:60:6e:cf:9a:32 SSID ''my_home_wifi' due to wpa_bss_flush
CTRL_IFACE monitor send - hexdump(len=21): 2f 74 6d 70 2f 77 70 61 5f 63 74 72 6c 5f 32 33 37 38 2d 31 00
wlp3s0: BSS: Remove id 1 BSSID 74:d0:2b:d3:3e:28 SSID ''my_home_wifi' due to wpa_bss_flush
CTRL_IFACE monitor send - hexdump(len=21): 2f 74 6d 70 2f 77 70 61 5f 63 74 72 6c 5f 32 33 37 38 2d 31 00
wlp3s0: BSS: Remove id 17 BSSID c8:60:00:94:ff:ea SSID 'ASUS' due to wpa_bss_flush
CTRL_IFACE monitor send - hexdump(len=21): 2f 74 6d 70 2f 77 70 61 5f 63 74 72 6c 5f 32 33 37 38 2d 31 00
wlp3s0: Cancelling scan request
wlp3s0: Cancelling authentication timeout
netlink: Operstate: linkmode=0, operstate=6
nl80211: Set mode ifindex 5 iftype 2 (STATION)
nl80211: Unsubscribe mgmt frames handle 0x10352e0 (mode change)
wlp3s0: CTRL-EVENT-TERMINATING
CTRL_IFACE monitor send - hexdump(len=21): 2f 74 6d 70 2f 77 70 61 5f 63 74 72 6c 5f 32 33 37 38 2d 31 00
CTRL_IFACE wait for attached monitors to receive messages


and

/var/log/messages says:

# tail -n 100 /var/log/messages
Code:
Jun 30 22:40:35 phils_x1 kernel: [ 2298.571447] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Jun 30 22:40:35 phils_x1 kernel: [ 2298.571449] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
Jun 30 22:40:35 phils_x1 kernel: [ 2298.571450] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Jun 30 22:40:35 phils_x1 kernel: [ 2298.571452] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Jun 30 22:40:45 phils_x1 NetworkManager[2134]: <info> (wlp3s0): supplicant interface state: disconnected -> inactive
Jun 30 22:40:46 phils_x1 kernel: [ 2309.803692] wlp3s0: authenticate with 08:60:6e:cf:9a:32
Jun 30 22:40:46 phils_x1 kernel: [ 2309.804633] wlp3s0: No basic rates, using min rate instead
Jun 30 22:40:46 phils_x1 kernel: [ 2309.805890] wlp3s0: direct probe to 08:60:6e:cf:9a:32 (try 1/3)
Jun 30 22:40:46 phils_x1 kernel: [ 2310.007958] wlp3s0: direct probe to 08:60:6e:cf:9a:32 (try 2/3)
Jun 30 22:40:47 phils_x1 kernel: [ 2310.210062] wlp3s0: direct probe to 08:60:6e:cf:9a:32 (try 3/3)
Jun 30 22:40:47 phils_x1 kernel: [ 2310.410723] wlp3s0: authentication with 08:60:6e:cf:9a:32 timed out
Jun 30 22:40:47 phils_x1 NetworkManager[2134]: <info> (wlp3s0): supplicant interface state: inactive -> disconnected
Jun 30 22:40:57 phils_x1 NetworkManager[2134]: <info> (wlp3s0): supplicant interface state: disconnected -> inactive
Jun 30 22:40:57 phils_x1 kernel: [ 2320.466706] wlp3s0: authenticate with 74:d0:2b:d3:3e:28
Jun 30 22:40:57 phils_x1 kernel: [ 2320.468987] wlp3s0: send auth to 74:d0:2b:d3:3e:28 (try 1/3)
Jun 30 22:40:57 phils_x1 kernel: [ 2320.470923] wlp3s0: authenticated
Jun 30 22:40:57 phils_x1 kernel: [ 2320.471733] wlp3s0: associate with 74:d0:2b:d3:3e:28 (try 1/3)
Jun 30 22:40:57 phils_x1 kernel: [ 2320.475598] wlp3s0: RX AssocResp from 74:d0:2b:d3:3e:28 (capab=0x411 status=0 aid=3)
Jun 30 22:40:57 phils_x1 kernel: [ 2320.477829] wlp3s0: associated
Jun 30 22:40:57 phils_x1 kernel: [ 2320.477983] wlp3s0: deauthenticating from 74:d0:2b:d3:3e:28 by local choice (reason=3)
Jun 30 22:40:57 phils_x1 NetworkManager[2134]: <info> (wlp3s0): supplicant interface state: inactive -> associated
Jun 30 22:40:57 phils_x1 NetworkManager[2134]: <warn> Connection disconnected (reason -3)
Jun 30 22:40:57 phils_x1 NetworkManager[2134]: <info> (wlp3s0): supplicant interface state: associated -> disconnected
Jun 30 22:40:57 phils_x1 NetworkManager[2134]: <warn> Connection disconnected (reason -3)
Jun 30 22:40:57 phils_x1 kernel: [ 2320.484002] cfg80211: Calling CRDA to update world regulatory domain
Jun 30 22:40:57 phils_x1 kernel: [ 2320.487520] cfg80211: World regulatory domain updated:
Jun 30 22:40:57 phils_x1 kernel: [ 2320.487525] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
Jun 30 22:40:57 phils_x1 kernel: [ 2320.487530] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Jun 30 22:40:57 phils_x1 kernel: [ 2320.487534] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Jun 30 22:40:57 phils_x1 kernel: [ 2320.487537] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
Jun 30 22:40:57 phils_x1 kernel: [ 2320.487541] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Jun 30 22:40:57 phils_x1 kernel: [ 2320.487544] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Jun 30 22:41:07 phils_x1 NetworkManager[2134]: <info> (wlp3s0): supplicant interface state: disconnected -> inactive
Jun 30 22:41:10 phils_x1 kernel: [ 2334.147352] wlp3s0: authenticate with 74:d0:2b:d3:3e:2c
Jun 30 22:41:10 phils_x1 kernel: [ 2334.150007] wlp3s0: send auth to 74:d0:2b:d3:3e:2c (try 1/3)
Jun 30 22:41:10 phils_x1 kernel: [ 2334.150852] wlp3s0: authenticated
Jun 30 22:41:10 phils_x1 kernel: [ 2334.151425] wlp3s0: associate with 74:d0:2b:d3:3e:2c (try 1/3)
Jun 30 22:41:10 phils_x1 kernel: [ 2334.152507] wlp3s0: RX AssocResp from 74:d0:2b:d3:3e:2c (capab=0x11 status=0 aid=4)
Jun 30 22:41:10 phils_x1 kernel: [ 2334.154495] wlp3s0: associated
Jun 30 22:41:10 phils_x1 kernel: [ 2334.154753] wlp3s0: deauthenticating from 74:d0:2b:d3:3e:2c by local choice (reason=3)
Jun 30 22:41:10 phils_x1 kernel: [ 2334.158250] cfg80211: Calling CRDA to update world regulatory domain
Jun 30 22:41:10 phils_x1 NetworkManager[2134]: <info> (wlp3s0): supplicant interface state: inactive -> associated
Jun 30 22:41:10 phils_x1 NetworkManager[2134]: <warn> Connection disconnected (reason -3)
Jun 30 22:41:10 phils_x1 NetworkManager[2134]: <info> (wlp3s0): supplicant interface state: associated -> disconnected
Jun 30 22:41:10 phils_x1 NetworkManager[2134]: <warn> Connection disconnected (reason -3)
Jun 30 22:41:10 phils_x1 kernel: [ 2334.161338] cfg80211: World regulatory domain updated:
Jun 30 22:41:10 phils_x1 kernel: [ 2334.161343] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
Jun 30 22:41:10 phils_x1 kernel: [ 2334.161346] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Jun 30 22:41:10 phils_x1 kernel: [ 2334.161348] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Jun 30 22:41:10 phils_x1 kernel: [ 2334.161350] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
Jun 30 22:41:10 phils_x1 kernel: [ 2334.161352] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Jun 30 22:41:10 phils_x1 kernel: [ 2334.161354] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Jun 30 22:41:20 phils_x1 NetworkManager[2134]: <info> (wlp3s0): supplicant interface state: disconnected -> inactive
Jun 30 22:41:21 phils_x1 kernel: [ 2344.253624] wlp3s0: authenticate with 08:60:6e:cf:9a:32
Jun 30 22:41:21 phils_x1 kernel: [ 2344.254627] wlp3s0: No basic rates, using min rate instead
Jun 30 22:41:21 phils_x1 kernel: [ 2344.255935] wlp3s0: direct probe to 08:60:6e:cf:9a:32 (try 1/3)
Jun 30 22:41:21 phils_x1 kernel: [ 2344.458031] wlp3s0: direct probe to 08:60:6e:cf:9a:32 (try 2/3)
Jun 30 22:41:21 phils_x1 kernel: [ 2344.660125] wlp3s0: direct probe to 08:60:6e:cf:9a:32 (try 3/3)
Jun 30 22:41:21 phils_x1 kernel: [ 2344.860789] wlp3s0: authentication with 08:60:6e:cf:9a:32 timed out
Jun 30 22:41:21 phils_x1 NetworkManager[2134]: <info> (wlp3s0): supplicant interface state: inactive -> disconnected
Jun 30 22:41:31 phils_x1 NetworkManager[2134]: <info> (wlp3s0): supplicant interface state: disconnected -> inactive
Jun 30 22:41:31 phils_x1 kernel: [ 2354.916107] wlp3s0: authenticate with 74:d0:2b:d3:3e:28
Jun 30 22:41:31 phils_x1 kernel: [ 2354.918346] wlp3s0: send auth to 74:d0:2b:d3:3e:28 (try 1/3)
Jun 30 22:41:31 phils_x1 kernel: [ 2354.920281] wlp3s0: authenticated
Jun 30 22:41:31 phils_x1 kernel: [ 2354.920696] wlp3s0: associate with 74:d0:2b:d3:3e:28 (try 1/3)
Jun 30 22:41:31 phils_x1 kernel: [ 2354.924576] wlp3s0: RX AssocResp from 74:d0:2b:d3:3e:28 (capab=0x411 status=0 aid=3)
Jun 30 22:41:31 phils_x1 kernel: [ 2354.930162] wlp3s0: associated
Jun 30 22:41:31 phils_x1 kernel: [ 2354.930328] wlp3s0: deauthenticating from 74:d0:2b:d3:3e:28 by local choice (reason=3)
Jun 30 22:41:31 phils_x1 kernel: [ 2354.935429] cfg80211: Calling CRDA to update world regulatory domain
Jun 30 22:41:31 phils_x1 NetworkManager[2134]: <info> (wlp3s0): supplicant interface state: inactive -> associated
Jun 30 22:41:31 phils_x1 NetworkManager[2134]: <warn> Connection disconnected (reason -3)
Jun 30 22:41:31 phils_x1 NetworkManager[2134]: <info> (wlp3s0): supplicant interface state: associated -> disconnected
Jun 30 22:41:31 phils_x1 NetworkManager[2134]: <warn> Connection disconnected (reason -3)
Jun 30 22:41:31 phils_x1 kernel: [ 2354.938764] cfg80211: World regulatory domain updated:
Jun 30 22:41:31 phils_x1 kernel: [ 2354.938768] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
Jun 30 22:41:31 phils_x1 kernel: [ 2354.938771] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Jun 30 22:41:31 phils_x1 kernel: [ 2354.938773] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Jun 30 22:41:31 phils_x1 kernel: [ 2354.938775] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
Jun 30 22:41:31 phils_x1 kernel: [ 2354.938777] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Jun 30 22:41:31 phils_x1 kernel: [ 2354.938778] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Jun 30 22:41:41 phils_x1 NetworkManager[2134]: <info> (wlp3s0): supplicant interface state: disconnected -> inactive
Jun 30 22:42:06 phils_x1 kernel: [ 2390.159045] wlp3s0: authenticate with 74:d0:2b:d3:3e:2c
Jun 30 22:42:06 phils_x1 kernel: [ 2390.161715] wlp3s0: send auth to 74:d0:2b:d3:3e:2c (try 1/3)
Jun 30 22:42:06 phils_x1 kernel: [ 2390.162433] wlp3s0: authenticated
Jun 30 22:42:06 phils_x1 kernel: [ 2390.163069] wlp3s0: associate with 74:d0:2b:d3:3e:2c (try 1/3)
Jun 30 22:42:06 phils_x1 kernel: [ 2390.164140] wlp3s0: RX AssocResp from 74:d0:2b:d3:3e:2c (capab=0x11 status=0 aid=4)
Jun 30 22:42:06 phils_x1 kernel: [ 2390.166034] wlp3s0: associated
Jun 30 22:42:06 phils_x1 kernel: [ 2390.166209] wlp3s0: deauthenticating from 74:d0:2b:d3:3e:2c by local choice (reason=3)
Jun 30 22:42:06 phils_x1 kernel: [ 2390.169043] cfg80211: Calling CRDA to update world regulatory domain
Jun 30 22:42:06 phils_x1 NetworkManager[2134]: <info> (wlp3s0): supplicant interface state: inactive -> associated
Jun 30 22:42:06 phils_x1 NetworkManager[2134]: <warn> Connection disconnected (reason -3)
Jun 30 22:42:06 phils_x1 NetworkManager[2134]: <info> (wlp3s0): supplicant interface state: associated -> disconnected
Jun 30 22:42:06 phils_x1 NetworkManager[2134]: <warn> Connection disconnected (reason -3)
Jun 30 22:42:06 phils_x1 kernel: [ 2390.172738] cfg80211: World regulatory domain updated:
Jun 30 22:42:06 phils_x1 kernel: [ 2390.172744] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
Jun 30 22:42:06 phils_x1 kernel: [ 2390.172748] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Jun 30 22:42:06 phils_x1 kernel: [ 2390.172752] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Jun 30 22:42:06 phils_x1 kernel: [ 2390.172755] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
Jun 30 22:42:06 phils_x1 kernel: [ 2390.172759] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Jun 30 22:42:06 phils_x1 kernel: [ 2390.172762] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)

_________________
/Phil
Back to top
View user's profile Send private message
philip
Guru
Guru


Joined: 10 Jun 2003
Posts: 535
Location: Sweden

PostPosted: Tue Jul 01, 2014 4:38 pm    Post subject: Reply with quote

I have made some progress.

I emerged gnome-extra/nm-applet

Through this GUI I manged to configure and get a connection with my Access Point.

Obviously kde-misc/networkmanagement use the wpa_supplicant SW for the lower level communication with the HW.

Those of you who use KDE's kde-misc/networkmanagement, do you use the
wpa_gui - wpa_supplicant user interface in combination with nm-applet (or possibly the plasma-nm)?
_________________
/Phil
Back to top
View user's profile Send private message
sebB
l33t
l33t


Joined: 02 Mar 2011
Posts: 730
Location: S.O. France

PostPosted: Tue Jul 01, 2014 6:36 pm    Post subject: Reply with quote

Can you post
Quote:
rc-update show
Back to top
View user's profile Send private message
philip
Guru
Guru


Joined: 10 Jun 2003
Posts: 535
Location: Sweden

PostPosted: Wed Jul 02, 2014 8:02 am    Post subject: Reply with quote

Here it is:

# rc-update show
Code:
NetworkManager |      default                 
             bootmisc | boot                         
           consolekit |      default                 
                 dbus |      default                 
                devfs |                       sysinit
                dmesg |                       sysinit
                 fsck | boot                         
             hostname | boot                         
              hwclock | boot                         
              keymaps | boot                         
            killprocs |              shutdown       
    kmod-static-nodes |                       sysinit
                local |      default                 
           localmount | boot                         
             loopback | boot                         
              modules | boot                         
             mount-ro |              shutdown       
                 mtab | boot                         
             netmount |      default                 
           ntp-client |      default                 
                 ntpd |      default                 
               procfs | boot                         
                 root | boot                         
            savecache |              shutdown       
                 sshd |      default                 
                 swap | boot                         
            swapfiles | boot                         
               sysctl | boot                         
                sysfs |                       sysinit
            syslog-ng |      default                 
         termencoding | boot                         
         tmpfiles.dev |                       sysinit
       tmpfiles.setup | boot                         
                 udev |                       sysinit
           udev-mount |                       sysinit
              urandom | boot                         
                  xdm |      default

_________________
/Phil
Back to top
View user's profile Send private message
Display posts from previous:   
Reply to topic    Gentoo Forums Forum Index Networking & Security All times are GMT
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum