Gentoo Forums
Gentoo Forums
Gentoo Forums
Quick Search: in
DHCPCD sigsegv with systemd and renaming interfaces
View unanswered posts
View posts from last 24 hours

 
Reply to topic    Gentoo Forums Forum Index Networking & Security
View previous topic :: View next topic  
Author Message
theit8514
n00b
n00b


Joined: 28 Jun 2014
Posts: 5

PostPosted: Sat Jun 28, 2014 2:31 am    Post subject: DHCPCD sigsegv with systemd and renaming interfaces Reply with quote

I'm not entirely sure this is related to systemd renaming interfaces, but it's the only thing I could think that is crashing it.

Every time my new system boots, dhcpcd sigsegvs and I have to log into the console and run systemctl start dhcpcd.

Log from journalctl:
Quote:
Jun 27 18:07:54 localhost dhcpcd[4475]: version 6.4.0 starting
Jun 27 18:07:54 localhost dhcpcd[4475]: dev: loaded udev
Jun 27 18:07:54 localhost dhcpcd[4475]: eth0: adding address fe80::xxxx
Jun 27 18:07:54 localhost sshd[4563]: Server listening on 0.0.0.0 port 22.
Jun 27 18:07:54 localhost sshd[4563]: Server listening on :: port 22.
Jun 27 18:07:54 localhost dhcpcd[4475]: no interfaces have a carrier
Jun 27 18:07:54 localhost dhcpcd[4475]: lo: unsupported interface type 00, falling back to ethernet
Jun 27 18:07:54 localhost dhcpcd[4475]: lo: adding address fe80::xxxx
Jun 27 18:07:54 localhost dhcpcd[4475]: if_addaddress6: No such device
Jun 27 18:07:54 localhost dhcpcd[4475]: DUID {duid}
Jun 27 18:07:54 localhost dhcpcd[4475]: lo: IAID 00:00:01:00
Jun 27 18:07:54 localhost dhcpcd[4475]: eth0: waiting for carrier
Jun 27 18:07:54 localhost dhcpcd[4475]: eno16777736: waiting for carrier
Jun 27 18:07:54 localhost kernel: IPv6: ADDRCONF(NETDEV_UP): eno16777736: link is not ready
Jun 27 18:07:54 localhost kernel: e1000: eno16777736 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None
Jun 27 18:07:54 localhost kernel: IPv6: ADDRCONF(NETDEV_CHANGE): eno16777736: link becomes ready
Jun 27 18:07:54 localhost dhcpcd[4475]: eno16777736: IAID 29:0c:64:ca
Jun 27 18:07:54 localhost dhcpcd[4475]: eno16777736: IAID conflicts with one assigned to eth0
Jun 27 18:07:54 localhost dhcpcd[4475]: eth0: removing interface
Jun 27 18:07:54 localhost dhcpcd[4475]: eno16777736: carrier acquired
Jun 27 18:07:54 localhost dhcpcd[4475]: eno16777736: IAID 29:0c:64:ca
Jun 27 18:07:54 localhost dhcpcd[4475]: lo: soliciting an IPv6 router
Jun 27 18:07:55 localhost dhcpcd[4475]: lo: needs a clientid to configure
Jun 27 18:07:55 localhost dhcpcd[4475]: eno16777736: rebinding lease of 172.25.100.106
Jun 27 18:07:55 localhost dhcpcd[4475]: eno16777736: soliciting an IPv6 router
Jun 27 18:07:55 localhost dhcpcd[4475]: [30B blob data]
Jun 27 18:07:55 localhost systemd-udevd[4470]: renamed network interface eth0 to eno16777736
Jun 27 18:07:55 localhost kernel: dhcpcd[4475]: segfault at 1000001cf ip 000000000041e478 sp 00007fff3d924170 error 4
Jun 27 18:07:55 localhost kernel: in dhcpcd[400000+35000]
Jun 27 18:07:55 localhost systemd[1]: dhcpcd.service: main process exited, code=killed, status=11/SEGV


So, having not installed Gentoo in probably about 3-4 years, how do I:

A. Prevent systemd from renaming my interface. I do not want to type eno16777736 every time. Sheesh.
B. Stop dhcpcd from crashing (maybe fixed by A?). I did try to follow some directions I saw on here from earlier this month and install dhcpcd 6.4 but the problem still persists.

Thanks!
Back to top
View user's profile Send private message
UberLord
Retired Dev
Retired Dev


Joined: 18 Sep 2003
Posts: 6737
Location: Blighty

PostPosted: Sat Jun 28, 2014 9:48 am    Post subject: Reply with quote

Well, the udev plugin loaded and udev must have told dhcpcd that eth0 was stable which it obviously wasn't

Still, it should not have segfaulted.
Can you built with debugging enabled and provide a backtrace from a dhcpcd core dump please?
_________________
Use dhcpcd for all your automated network configuration needs
Use dhcpcd-ui (GTK+/Qt) as your System Tray Network tool
Back to top
View user's profile Send private message
theit8514
n00b
n00b


Joined: 28 Jun 2014
Posts: 5

PostPosted: Sat Jun 28, 2014 2:36 pm    Post subject: Reply with quote

Haha, I think I finally figured this out. I set up kernel with CONFIG_COREDUMP, added the * soft core unlimited to limits.conf, updated the systemd service with LimitCORE=infinity, and set the sysctl settings for dumping the core of suid. Whew.

And just to double check, this is the proper debug config for building the package, right?
Code:
# cat /etc/portage/env/debug.conf
CFLAGS="${CFLAGS} -ggdb"
CXXFLAGS="${CXXFLAGS} -ggdb"
FEATURES="noclean nostrip splitdebug"
# cat /etc/portage/package.env
net-misc/dhcpcd debug.conf


And tada, I have a core dump. Only took me 2 hours :oops:

Code:
# gdb_get_backtrace `which dhcpcd` core.dump.1403951241.4491
[New LWP 4491]

warning: Could not load shared library symbols for linux-vdso.so.1.
Do you need "set solib-search-path" or "set sysroot"?
[Thread debugging using libthread_db enabled]
Using host libthread_db library "/lib64/libthread_db.so.1".
Core was generated by `/sbin/dhcpcd -q --nobackground'.
Program terminated with signal 11, Segmentation fault.
#0  0x0000000000416091 in dhcp_start1 (arg=0x636830) at dhcp.c:2915
2915            if (ifp->ctx->udp_fd == -1 && dhcp_openudp(ifp->ctx, NULL) != -1)

Thread 1 (Thread 0x7f6c06921700 (LWP 4491)):
#0  0x0000000000416091 in dhcp_start1 (arg=0x636830) at dhcp.c:2915
        ifp = 0x636830
        ifo = 0x654630
        state = <optimized out>
        st = {st_dev = 1, st_ino = 4258656, st_nlink = 140736987641488, st_mode = 1137, st_uid = 0, st_gid = 0, __pad0 = 0, st_rdev = 0, st_size = 1, st_blksize = 4258157, st_blocks = 140736987641152, st_atim = {tv_sec = 6601440, tv_nsec = 25769803776}, st_mtim = {tv_sec = 420906795072, tv_nsec = 6513360}, st_ctim = {tv_sec = 140736987640944, tv_nsec = 140736989141068}, __unused = {140736987640976, 1, 140736987641008}}
        now = {tv_sec = 1137, tv_usec = 1137}
        l = <optimized out>
        nolease = <optimized out>
#1  0x0000000000407a13 in eloop_start (dctx=dctx@entry=0x7fffe227b690) at eloop.c:357
        ctx = 0x63e430
        now = {tv_sec = 11, tv_usec = 535167}
        n = 6515840
        e = <optimized out>
        t = 0x636790
        tv = <optimized out>
        ts = {tv_sec = 0, tv_nsec = 348779000}
        tsp = <optimized out>
        t0 = <optimized out>
#2  0x0000000000403809 in main (argc=<optimized out>, argv=<optimized out>) at dhcpcd.c:1598
        ctx = {sigset = {__val = {0 <repeats 16 times>}}, cffile = 0x427bd4 "/etc/dhcpcd.conf", options = 1830040538848265, argc = 3, argv = 0x7fffe227b9b8, ifac = 0, ifav = 0x0, ifdc = 0, ifdv = 0x0, ifc = 0, ifv = 0x7fffe227b9d0, duid = 0x64c250 "", duid_len = 14, pid_fd = 3, link_fd = 6, ifaces = 0x64dee0, eloop = 0x63e430, control_fd = 4, control_fds = 0x0, control_sock = "/run/dhcpcd.sock", '\000' <repeats 20 times>, control_group = 0, vivso = 0x0, vivso_len = 0, dhcp_opts = 0x63c5e0, dhcp_opts_len = 121, ipv4_routes = 0x64df60, udp_fd = -1, packet = 0x0, opt_buffer = 0x0, secret = '\000' <repeats 63 times>, secret_len = 0, dhcp6_opts = 0x643810, dhcp6_opts_len = 69, ipv6 = 0x64b360, ra_restore = 0x64df20, ra_restore_len = 2, dev_load = 0x0, dev_fd = 8, dev = 0x64da80, dev_handle = 0x64c990}
        pidfile = "/run/dhcpcd.pid\000 +\223\006l\177\000\000ô'q\006l\177\000\000po\027\006l\177"
        ifo = 0x0
        ifp = 0x0
        family = <optimized out>
        opt = 0
        oi = 25
        i = <optimized out>
        t = <optimized out>
        len = <optimized out>
        pid = <optimized out>
        sig = <optimized out>
        siga = <optimized out>
        ts = {tv_sec = 140101935394384, tv_nsec = 140101941311835}
        __func__ = "main"
Back to top
View user's profile Send private message
UberLord
Retired Dev
Retired Dev


Joined: 18 Sep 2003
Posts: 6737
Location: Blighty

PostPosted: Sat Jun 28, 2014 3:35 pm    Post subject: Reply with quote

Hmmmm, it shouldn't really be crashing there.
Can you add debug on a line by itself in /etc/dhcpcd.conf and provide another log snippet please so I can get more context?
_________________
Use dhcpcd for all your automated network configuration needs
Use dhcpcd-ui (GTK+/Qt) as your System Tray Network tool
Back to top
View user's profile Send private message
theit8514
n00b
n00b


Joined: 28 Jun 2014
Posts: 5

PostPosted: Sat Jun 28, 2014 4:07 pm    Post subject: Reply with quote

Code:
Jun 28 08:00:20 localhost dhcpcd[4513]: version 6.4.0 starting
Jun 28 08:00:20 localhost dhcpcd[4513]: udev: starting
Jun 28 08:00:20 localhost dhcpcd[4513]: dev: loaded udev
Jun 28 08:00:20 localhost dhcpcd[4513]: eno16777736: disabling kernel IPv6 RA support
Jun 28 08:00:20 localhost dhcpcd[4513]: eno16777736: adding address fe80::xxxx
Jun 28 08:00:20 localhost dhcpcd[4513]: eno16777736: vltime infinity, pltime infinity
Jun 28 08:00:20 localhost dhcpcd[4513]: eno16777736: executing `/lib/dhcpcd/dhcpcd-run-hooks' PREINIT
Jun 28 08:00:20 localhost dhcpcd[4513]: eno16777736: executing `/lib/dhcpcd/dhcpcd-run-hooks' NOCARRIER
Jun 28 08:00:20 localhost dhcpcd[4513]: no interfaces have a carrier
Jun 28 08:00:20 localhost dhcpcd[4513]: eno16777736: waiting for carrier
Jun 28 08:00:20 localhost dhcpcd[4513]: eno16777736: carrier acquired
Jun 28 08:00:20 localhost dhcpcd[4513]: eno16777736: executing `/lib/dhcpcd/dhcpcd-run-hooks' CARRIER
Jun 28 08:00:20 localhost dhcpcd[4513]: DUID {duid}
Jun 28 08:00:20 localhost dhcpcd[4513]: eno16777736: IAID 29:0c:64:ca
Jun 28 08:00:20 localhost dhcpcd[4513]: eno16777736: delaying IPv6 router solictation for 0.5 seconds
Jun 28 08:00:20 localhost dhcpcd[4513]: eno16777736: delaying DHCP for 0.9 seconds
Jun 28 08:00:20 localhost dhcpcd[4513]: eno16777736: libudev: add
Jun 28 08:00:20 localhost dhcpcd[4513]: eno16777736: executing `/lib/dhcpcd/dhcpcd-run-hooks' PREINIT
Jun 28 08:00:20 localhost dhcpcd[4513]: eno16777736: executing `/lib/dhcpcd/dhcpcd-run-hooks' CARRIER
Jun 28 08:00:20 localhost dhcpcd[4513]: eno16777736: IAID 29:0c:64:ca
Jun 28 08:00:20 localhost dhcpcd[4513]: eno16777736: IAID conflicts with one assigned to eno16777736
Jun 28 08:00:20 localhost dhcpcd[4513]: eno16777736: delaying IPv6 router solictation for 0.4 seconds
Jun 28 08:00:20 localhost dhcpcd[4513]: eno16777736: delaying DHCP for 0.8 seconds
Jun 28 08:00:20 localhost dhcpcd[4513]: eno16777736: libudev: move
Jun 28 08:00:20 localhost dhcpcd[4513]: eno16777736: executing `/lib/dhcpcd/dhcpcd-run-hooks' PREINIT
Jun 28 08:00:20 localhost dhcpcd[4513]: eno16777736: executing `/lib/dhcpcd/dhcpcd-run-hooks' CARRIER
Jun 28 08:00:20 localhost dhcpcd[4513]: eno16777736: IAID 29:0c:64:ca
Jun 28 08:00:20 localhost dhcpcd[4513]: eno16777736: IAID conflicts with one assigned to eno16777736
Jun 28 08:00:20 localhost dhcpcd[4513]: eno16777736: delaying IPv6 router solictation for 0.2 seconds
Jun 28 08:00:20 localhost dhcpcd[4513]: eno16777736: delaying DHCP for 0.4 seconds
Jun 28 08:00:21 localhost dhcpcd[4513]: eno16777736: soliciting an IPv6 router
Jun 28 08:00:21 localhost dhcpcd[4513]: eno16777736: delaying Router Solicitation for LL address
Jun 28 08:00:21 localhost dhcpcd[4513]: [30B blob data]
Jun 28 08:00:21 localhost systemd[1]: dhcpcd.service: main process exited, code=dumped, status=11/SEGV
Jun 28 08:00:21 localhost systemd[1]: Unit dhcpcd.service entered failed state.
Jun 28 08:00:21 localhost systemd-udevd[4107]: renamed network interface eth0 to eno16777736
Jun 28 08:00:21 localhost kernel: dhcpcd[4513]: segfault at 770 ip 000000000041e480 sp 00007fff0b73d4d0 error 4
Jun 28 08:00:21 localhost kernel:  in dhcpcd[400000+35000]
Jun 28 08:00:21 localhost systemd[1]: dhcpcd.service: main process exited, code=dumped, status=11/SEGV
Jun 28 08:00:21 localhost systemd[1]: Unit dhcpcd.service entered failed state.
Jun 28 08:00:21 localhost kernel: dhcpcd[4513]: segfault at 770 ip 000000000041e480 sp 00007fff0b73d4d0 error 4
Jun 28 08:00:21 localhost kernel:  in dhcpcd[400000+35000]
Back to top
View user's profile Send private message
UberLord
Retired Dev
Retired Dev


Joined: 18 Sep 2003
Posts: 6737
Location: Blighty

PostPosted: Mon Jun 30, 2014 10:08 am    Post subject: Reply with quote

Interesting.

So it looks like that udev lied that the device was ready and it issued an add and move call - only one should have been issued.
So I think it's caused by a udev bug.
However, dhcpcd still shouldn't segfault but I can't see what I'm doing wrong. I'll keep poking at it, but for the time being file a bug at bugs.gentoo.org
_________________
Use dhcpcd for all your automated network configuration needs
Use dhcpcd-ui (GTK+/Qt) as your System Tray Network tool
Back to top
View user's profile Send private message
UberLord
Retired Dev
Retired Dev


Joined: 18 Sep 2003
Posts: 6737
Location: Blighty

PostPosted: Mon Jun 30, 2014 11:09 am    Post subject: Reply with quote

Can you test this patch please?
http://roy.marples.name/~roy/dhcpcd-ifdebug.diff

If it fails, some more dhcpcd debug output would be nice so I can see the new messages.
_________________
Use dhcpcd for all your automated network configuration needs
Use dhcpcd-ui (GTK+/Qt) as your System Tray Network tool
Back to top
View user's profile Send private message
UberLord
Retired Dev
Retired Dev


Joined: 18 Sep 2003
Posts: 6737
Location: Blighty

PostPosted: Mon Jun 30, 2014 11:28 am    Post subject: Reply with quote

Or you can try the dhcpcd-9999 ebuild as I have committed a similar patch upstream.
_________________
Use dhcpcd for all your automated network configuration needs
Use dhcpcd-ui (GTK+/Qt) as your System Tray Network tool
Back to top
View user's profile Send private message
theit8514
n00b
n00b


Joined: 28 Jun 2014
Posts: 5

PostPosted: Mon Jun 30, 2014 3:17 pm    Post subject: Reply with quote

So maybe the error is not tied to the renaming of the interface. Patch applied and still crashing. I'm doing an emerge @world right now to see if maybe something else is messed up.

Two new logs:
Code:
Jun 30 06:49:06 localhost systemd-udevd[4411]: renamed network interface eth0 to eno16777736
Jun 30 06:49:06 localhost dhcpcd[4557]: version 6.4.0 starting
Jun 30 06:49:06 localhost dhcpcd[4557]: udev: starting
Jun 30 06:49:06 localhost dhcpcd[4557]: dev: loaded udev
Jun 30 06:49:06 localhost dhcpcd[4557]: eno16777736: disabling kernel IPv6 RA support
Jun 30 06:49:06 localhost dhcpcd[4557]: eno16777736: adding address fe80::xxxx
Jun 30 06:49:06 localhost dhcpcd[4557]: eno16777736: vltime infinity, pltime infinity
Jun 30 06:49:06 localhost dhcpcd[4557]: eno16777736: executing `/lib/dhcpcd/dhcpcd-run-hooks' PREINIT
Jun 30 06:49:06 localhost dhcpcd[4557]: eno16777736: executing `/lib/dhcpcd/dhcpcd-run-hooks' NOCARRIER
Jun 30 06:49:06 localhost dhcpcd[4557]: no interfaces have a carrier
Jun 30 06:49:06 localhost kernel: IPv6: ADDRCONF(NETDEV_UP): eno16777736: link is not ready
Jun 30 06:49:06 localhost dhcpcd[4557]: eno16777736: waiting for carrier
Jun 30 06:49:06 localhost dhcpcd[4557]: eno16777736: libudev: add
Jun 30 06:49:06 localhost dhcpcd[4557]: eno16777736: interface updated
Jun 30 06:49:06 localhost systemd[1]: dhcpcd.service: main process exited, code=killed, status=11/SEGV
Jun 30 06:49:06 localhost systemd[1]: Unit dhcpcd.service entered failed state.
Jun 30 06:49:06 localhost kernel: dhcpcd[4557]: segfault at 60a0 ip 0000000000405c75 sp 00007fff84365230 error 4 in dhcpcd[400000+35000]
Jun 30 06:49:06 localhost kernel: e1000: eno16777736 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None
Jun 30 06:49:06 localhost kernel: IPv6: ADDRCONF(NETDEV_CHANGE): eno16777736: link becomes ready


Code:
Jun 30 06:58:41 localhost dhcpcd[4444]: version 6.4.0 starting
Jun 30 06:58:41 localhost dhcpcd[4444]: udev: starting
Jun 30 06:58:41 localhost dhcpcd[4444]: dev: loaded udev
Jun 30 06:58:41 localhost dhcpcd[4444]: eno16777736: disabling kernel IPv6 RA support
Jun 30 06:58:41 localhost dhcpcd[4444]: eno16777736: adding address fe80::xxxx
Jun 30 06:58:41 localhost dhcpcd[4444]: eno16777736: vltime infinity, pltime infinity
Jun 30 06:58:41 localhost dhcpcd[4444]: eno16777736: executing `/lib/dhcpcd/dhcpcd-run-hooks' PREINIT
Jun 30 06:58:41 localhost systemd-udevd[4415]: renamed network interface eth0 to eno16777736
Jun 30 06:58:41 localhost dhcpcd[4444]: eno16777736: executing `/lib/dhcpcd/dhcpcd-run-hooks' NOCARRIER
Jun 30 06:58:41 localhost dhcpcd[4444]: no interfaces have a carrier
Jun 30 06:58:41 localhost dhcpcd[4444]: lo: libudev: add
Jun 30 06:58:41 localhost dhcpcd[4444]: lo: unsupported interface type 00, falling back to ethernet
Jun 30 06:58:41 localhost dhcpcd[4444]: lo: interface added
Jun 30 06:58:41 localhost dhcpcd[4444]: lo: disabling kernel IPv6 RA support
Jun 30 06:58:41 localhost dhcpcd[4444]: lo: adding address fe80::xxxx
Jun 30 06:58:41 localhost dhcpcd[4444]: if_addaddress6: No such device
Jun 30 06:58:41 localhost dhcpcd[4444]: lo: executing `/lib/dhcpcd/dhcpcd-run-hooks' PREINIT
Jun 30 06:58:41 localhost dhcpcd[4444]: lo: executing `/lib/dhcpcd/dhcpcd-run-hooks' CARRIER
Jun 30 06:58:41 localhost dhcpcd[4444]: DUID 00:01:00:01:1b:40:73:45:xxxx
Jun 30 06:58:41 localhost dhcpcd[4444]: lo: IAID 00:00:01:00
Jun 30 06:58:41 localhost dhcpcd[4444]: lo: delaying IPv6 router solictation for 0.6 seconds
Jun 30 06:58:41 localhost dhcpcd[4444]: lo: delaying DHCP for 0.4 seconds
Jun 30 06:58:41 localhost dhcpcd[4444]: eno16777736: waiting for carrier
Jun 30 06:58:41 localhost dhcpcd[4444]: eno16777736: libudev: add
Jun 30 06:58:41 localhost dhcpcd[4444]: eno16777736: interface updated
Jun 30 06:58:41 localhost systemd[1]: dhcpcd.service: main process exited, code=dumped, status=11/SEGV
Jun 30 06:58:41 localhost systemd[1]: Unit dhcpcd.service entered failed state.
Jun 30 06:58:41 localhost kernel: e1000: eno16777736 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None
Jun 30 06:58:41 localhost kernel: IPv6: ADDRCONF(NETDEV_UP): eno16777736: link is not ready
Jun 30 06:58:41 localhost kernel: IPv6: ADDRCONF(NETDEV_CHANGE): eno16777736: link becomes ready
Jun 30 06:58:41 localhost kernel: dhcpcd[4444]: segfault at 60a0 ip 0000000000405c75 sp 00007fff604c0e40 error 4 in dhcpcd[400000+35000]


The IPv6 is new, and I have this new backtrace which happens in dhcpcd_startinterface (IPv6)
Code:
# gdb_get_backtrace `which dhcpcd` core.dump.1404125921.4444
[New LWP 4444]

warning: Could not load shared library symbols for linux-vdso.so.1.
Do you need "set solib-search-path" or "set sysroot"?
[Thread debugging using libthread_db enabled]
Using host libthread_db library "/lib64/libthread_db.so.1".
Core was generated by `/sbin/dhcpcd -q --nobackground'.
Program terminated with signal 11, Segmentation fault.
#0  dhcpcd_startinterface (arg=arg@entry=0x64e680) at dhcpcd.c:576
576             if (ifo->options & DHCPCD_IPV6 && ipv6_start(ifp) == -1) {

Thread 1 (Thread 0x7fb8613ab700 (LWP 4444)):
#0  dhcpcd_startinterface (arg=arg@entry=0x64e680) at dhcpcd.c:576
        ifp = 0x64e680
        ifo = 0x0
        i = <optimized out>
        buf = "\020\017L`ÿ\177\000\000P\016L`ÿ\177\000\000\200\021L`ÿ\177\000\000\070õd\000\000\000\000\000\200æd\000\000\000\000\000\210ßd", '\000' <repeats 29 times>, "bgÍ`¸\177\000\000\003\020\000\000\000\000\000\000\001\000\000\000\060\000\000\000\230æd\000\000\000\000\000 \017L`ÿ\177\000\000`Id\000\000\000\000\000`ñd\000\000\000\000\000\200\021L`ÿ\177"
#1  0x0000000000406480 in dhcpcd_handleinterface (arg=0x7fff604c1180, action=1, ifname=0x64c4b0 "eno16777736") at dhcpcd.c:786
        ctx = 0x7fff604c1180
        ifs = 0x64f030
        ifp = 0x64e680
        ifn = 0x0
        ifl = 0x64df70
        argv = {0x64c4b0 "eno16777736"}
        i = 0
#2  0x00007fb8609eb029 in udev_handle_device (ctx=0x7fff604c1180) at udev.c:95
        device = 0x64af30
        subsystem = 0x64e260 "net"
        ifname = 0x64c4b0 "eno16777736"
        action = <optimized out>
#3  0x0000000000407af6 in eloop_start (dctx=dctx@entry=0x7fff604c1180) at eloop.c:399
        ctx = 0x63e430
        now = {tv_sec = 10, tv_usec = 613775}
        n = 6610850
        e = <optimized out>
        t = 0x64e0a0
        tv = <optimized out>
        ts = {tv_sec = 0, tv_nsec = 403839000}
        tsp = <optimized out>
        t0 = <optimized out>
#4  0x0000000000403809 in main (argc=<optimized out>, argv=<optimized out>) at dhcpcd.c:1603
        ctx = {sigset = {__val = {0 <repeats 16 times>}}, cffile = 0x427c55 "/etc/dhcpcd.conf", options = 1830040538848297, argc = 3, argv = 0x7fff604c14a8, ifac = 0, ifav = 0x0, ifdc = 0, ifdv = 0x0, ifc = 0, ifv = 0x7fff604c14c0, duid = 0x64c100 "", duid_len = 14, pid_fd = 3, link_fd = 6, ifaces = 0x64dc80, eloop = 0x63e430, control_fd = 4, control_fds = 0x0, control_sock = "/run/dhcpcd.sock", '\000' <repeats 20 times>, control_group = 0, vivso = 0x0, vivso_len = 0, dhcp_opts = 0x63c5e0, dhcp_opts_len = 121, ipv4_routes = 0x64b1f0, udp_fd = -1, packet = 0x0, opt_buffer = 0x0, secret = '\000' <repeats 63 times>, secret_len = 0, dhcp6_opts = 0x643810, dhcp6_opts_len = 69, ipv6 = 0x64b240, ra_restore = 0x64b1b0, ra_restore_len = 2, dev_load = 0x0, dev_fd = 8, dev = 0x64da80, dev_handle = 0x64c990}
        pidfile = "/run/dhcpcd.pid\000 Ë;a¸\177\000\000ôÇ\031a¸\177\000\000p\017À`¸\177"
        ifo = 0x0
        ifp = 0x0
        family = <optimized out>
        opt = 0
        oi = 25
        i = <optimized out>
        t = <optimized out>
        len = <optimized out>
        pid = <optimized out>
        sig = <optimized out>
        siga = <optimized out>
        ts = {tv_sec = 140429873909328, tv_nsec = 140429879826779}
        __func__ = "main"
Back to top
View user's profile Send private message
UberLord
Retired Dev
Retired Dev


Joined: 18 Sep 2003
Posts: 6737
Location: Blighty

PostPosted: Mon Jun 30, 2014 3:57 pm    Post subject: Reply with quote

OK, fixed here I think: http://roy.marples.name/projects/dhcpcd/fdiff?v1=c2f0f356fbb7ba56801b45f38b52ac89976cca7d&v2=0e945dc9ec65fed2f41c0e27f80d9c8145cae181&sbs=0

Requires the previous patch as well.
_________________
Use dhcpcd for all your automated network configuration needs
Use dhcpcd-ui (GTK+/Qt) as your System Tray Network tool
Back to top
View user's profile Send private message
theit8514
n00b
n00b


Joined: 28 Jun 2014
Posts: 5

PostPosted: Mon Jun 30, 2014 6:28 pm    Post subject: Reply with quote

Thanks! I was unable to apply the patch directly using the 6.4.0 codebase, so I switched to dhcpcd-9999 and the patch you have committed has not crashed in 4-5 reboots now.
Back to top
View user's profile Send private message
UberLord
Retired Dev
Retired Dev


Joined: 18 Sep 2003
Posts: 6737
Location: Blighty

PostPosted: Mon Jun 30, 2014 6:36 pm    Post subject: Reply with quote

Nice!
_________________
Use dhcpcd for all your automated network configuration needs
Use dhcpcd-ui (GTK+/Qt) as your System Tray Network tool
Back to top
View user's profile Send private message
Display posts from previous:   
Reply to topic    Gentoo Forums Forum Index Networking & Security All times are GMT
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum