View previous topic :: View next topic |
Author |
Message |
jimqode n00b
Joined: 31 May 2012 Posts: 3
|
Posted: Thu May 31, 2012 6:20 pm Post subject: Autoresize guest does not work with i3wm on VirtualBox. |
|
|
Hello there,
I'm running Gentoo as a VirtualBox guest. I'm using i3 as my wm (I don't know if that matters). Autoresize guest does not work for me. System is up to date and VirtualBox guest additions has been installed from portage. Here is my Xorg.log:
Code: |
[ 1747.148]
X.Org X Server 1.11.2
Release Date: 2011-11-04
[ 1747.150] X Protocol Version 11, Revision 0
[ 1747.152] Build Operating System: Linux 3.2.12-gentoo x86_64 Gentoo
[ 1747.153] Current Operating System: Linux jimmies 3.2.12-gentoo #3 SMP Thu May 31 20:04:22 EEST 2012 x86_64
[ 1747.154] Kernel command line: root=/dev/sda3
[ 1747.156] Build Date: 31 May 2012 12:39:34AM
[ 1747.157]
[ 1747.158] Current version of pixman: 0.24.0
[ 1747.159] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 1747.161] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 1747.166] (==) Log file: "/var/log/Xorg.0.log", Time: Thu May 31 21:11:46 2012
[ 1747.167] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 1747.168] (==) No Layout section. Using the first Screen section.
[ 1747.168] (==) No screen section available. Using defaults.
[ 1747.168] (**) |-->Screen "Default Screen Section" (0)
[ 1747.168] (**) | |-->Monitor "<default monitor>"
[ 1747.168] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 1747.168] (==) Automatically adding devices
[ 1747.168] (==) Automatically enabling devices
[ 1747.168] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/OTF/,
/usr/share/fonts/Type1/,
/usr/share/fonts/100dpi/,
/usr/share/fonts/75dpi/
[ 1747.168] (==) ModulePath set to "/usr/lib64/xorg/modules"
[ 1747.168] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 1747.168] (II) Loader magic: 0x7cfac0
[ 1747.168] (II) Module ABI versions:
[ 1747.168] X.Org ANSI C Emulation: 0.4
[ 1747.168] X.Org Video Driver: 11.0
[ 1747.168] X.Org XInput driver : 13.0
[ 1747.168] X.Org Server Extension : 6.0
[ 1747.170] (--) PCI:*(0:0:2:0) 80ee:beef:0000:0000 rev 0, Mem @ 0xe0000000/67108864
[ 1747.170] (II) LoadModule: "extmod"
[ 1747.170] (II) Loading /usr/lib64/xorg/modules/extensions/libextmod.so
[ 1747.170] (II) Module extmod: vendor="X.Org Foundation"
[ 1747.171] compiled for 1.11.2, module version = 1.0.0
[ 1747.171] Module class: X.Org Server Extension
[ 1747.171] ABI class: X.Org Server Extension, version 6.0
[ 1747.171] (II) Loading extension MIT-SCREEN-SAVER
[ 1747.171] (II) Loading extension XFree86-VidModeExtension
[ 1747.171] (II) Loading extension XFree86-DGA
[ 1747.171] (II) Loading extension DPMS
[ 1747.171] (II) Loading extension XVideo
[ 1747.171] (II) Loading extension XVideo-MotionCompensation
[ 1747.171] (II) Loading extension X-Resource
[ 1747.171] (II) LoadModule: "dbe"
[ 1747.171] (II) Loading /usr/lib64/xorg/modules/extensions/libdbe.so
[ 1747.171] (II) Module dbe: vendor="X.Org Foundation"
[ 1747.171] compiled for 1.11.2, module version = 1.0.0
[ 1747.171] Module class: X.Org Server Extension
[ 1747.171] ABI class: X.Org Server Extension, version 6.0
[ 1747.171] (II) Loading extension DOUBLE-BUFFER
[ 1747.171] (II) LoadModule: "glx"
[ 1747.171] (II) Loading /usr/lib64/xorg/modules/extensions/libglx.so
[ 1747.171] (II) Module glx: vendor="X.Org Foundation"
[ 1747.171] compiled for 1.11.2, module version = 1.0.0
[ 1747.171] ABI class: X.Org Server Extension, version 6.0
[ 1747.171] (==) AIGLX enabled
[ 1747.171] (II) Loading extension GLX
[ 1747.171] (II) LoadModule: "record"
[ 1747.171] (II) Loading /usr/lib64/xorg/modules/extensions/librecord.so
[ 1747.171] (II) Module record: vendor="X.Org Foundation"
[ 1747.171] compiled for 1.11.2, module version = 1.13.0
[ 1747.171] Module class: X.Org Server Extension
[ 1747.171] ABI class: X.Org Server Extension, version 6.0
[ 1747.171] (II) Loading extension RECORD
[ 1747.171] (II) LoadModule: "dri"
[ 1747.171] (II) Loading /usr/lib64/xorg/modules/extensions/libdri.so
[ 1747.172] (II) Module dri: vendor="X.Org Foundation"
[ 1747.172] compiled for 1.11.2, module version = 1.0.0
[ 1747.172] ABI class: X.Org Server Extension, version 6.0
[ 1747.172] (II) Loading extension XFree86-DRI
[ 1747.172] (II) LoadModule: "dri2"
[ 1747.172] (II) Loading /usr/lib64/xorg/modules/extensions/libdri2.so
[ 1747.172] (II) Module dri2: vendor="X.Org Foundation"
[ 1747.172] compiled for 1.11.2, module version = 1.2.0
[ 1747.172] ABI class: X.Org Server Extension, version 6.0
[ 1747.172] (II) Loading extension DRI2
[ 1747.172] (==) Matched vboxvideo as autoconfigured driver 0
[ 1747.172] (==) Matched vesa as autoconfigured driver 1
[ 1747.172] (==) Matched fbdev as autoconfigured driver 2
[ 1747.172] (==) Assigned the driver to the xf86ConfigLayout
[ 1747.172] (II) LoadModule: "vboxvideo"
[ 1747.172] (II) Loading /usr/lib64/xorg/modules/drivers/vboxvideo_drv.so
[ 1747.172] (II) Module vboxvideo: vendor="Oracle Corporation"
[ 1747.172] compiled for 1.5.99.901, module version = 1.0.1
[ 1747.172] Module class: X.Org Video Driver
[ 1747.172] ABI class: X.Org Video Driver, version 11.0
[ 1747.172] (**) Load address of symbol "VBOXVIDEO" is 0x7fbd9c825400
[ 1747.172] (II) LoadModule: "vesa"
[ 1747.173] (WW) Warning, couldn't open module vesa
[ 1747.173] (II) UnloadModule: "vesa"
[ 1747.173] (II) Unloading vesa
[ 1747.173] (EE) Failed to load module "vesa" (module does not exist, 0)
[ 1747.174] (II) LoadModule: "fbdev"
[ 1747.174] (WW) Warning, couldn't open module fbdev
[ 1747.174] (II) UnloadModule: "fbdev"
[ 1747.174] (II) Unloading fbdev
[ 1747.174] (EE) Failed to load module "fbdev" (module does not exist, 0)
[ 1747.175] (II) VBoxVideo: guest driver for VirtualBox: vbox
[ 1747.175] (--) using VT number 7
[ 1747.188] (II) Loading /usr/lib64/xorg/modules/drivers/vboxvideo_drv.so
[ 1747.188] (II) VBoxVideo(0): VirtualBox guest additions video driver version 4.1.16_OSE
[ 1747.188] (II) Loading sub module "ramdac"
[ 1747.188] (II) LoadModule: "ramdac"
[ 1747.188] (II) Module "ramdac" already built-in
[ 1747.188] (II) Loading sub module "fb"
[ 1747.188] (II) LoadModule: "fb"
[ 1747.188] (II) Loading /usr/lib64/xorg/modules/libfb.so
[ 1747.188] (II) Module fb: vendor="X.Org Foundation"
[ 1747.188] compiled for 1.11.2, module version = 1.0.0
[ 1747.188] ABI class: X.Org ANSI C Emulation, version 0.4
[ 1747.189] (II) Loading sub module "shadowfb"
[ 1747.189] (II) LoadModule: "shadowfb"
[ 1747.189] (II) Loading /usr/lib64/xorg/modules/libshadowfb.so
[ 1747.189] (II) Module shadowfb: vendor="X.Org Foundation"
[ 1747.189] compiled for 1.11.2, module version = 1.0.0
[ 1747.189] ABI class: X.Org ANSI C Emulation, version 0.4
[ 1747.189] (II) Loading sub module "vgahw"
[ 1747.189] (II) LoadModule: "vgahw"
[ 1747.189] (II) Loading /usr/lib64/xorg/modules/libvgahw.so
[ 1747.189] (II) Module vgahw: vendor="X.Org Foundation"
[ 1747.189] compiled for 1.11.2, module version = 0.1.0
[ 1747.189] ABI class: X.Org Video Driver, version 11.0
[ 1747.189] (II) Loading sub module "dri"
[ 1747.189] (II) LoadModule: "dri"
[ 1747.189] (II) Loading /usr/lib64/xorg/modules/extensions/libdri.so
[ 1747.189] (II) Module dri: vendor="X.Org Foundation"
[ 1747.189] compiled for 1.11.2, module version = 1.0.0
[ 1747.189] ABI class: X.Org Server Extension, version 6.0
[ 1747.189] (II) VBoxVideo(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 1747.190] (==) VBoxVideo(0): Depth 24, (--) framebuffer bpp 32
[ 1747.190] (--) VBoxVideo(0): Virtual size is 32000x32000 (pitch 32000)
[ 1747.190] (**) VBoxVideo(0): Built-in mode "VBoxInitialMode": 39.8 MHz (scaled from 0.0 MHz), 37.9 kHz, 60.0 Hz
[ 1747.190] (II) VBoxVideo(0): Modeline "VBoxInitialMode"x0.0 39.78 1043 1045 1047 1049 626 628 630 632 (37.9 kHz)
[ 1747.190] (**) VBoxVideo(0): Built-in mode "VBoxDynamicMode": 39.8 MHz (scaled from 0.0 MHz), 37.9 kHz, 60.0 Hz
[ 1747.190] (II) VBoxVideo(0): Modeline "VBoxDynamicMode"x0.0 39.78 1043 1045 1047 1049 626 628 630 632 (37.9 kHz)
[ 1747.190] (**) VBoxVideo(0): Built-in mode "VBoxDynamicMode": 39.8 MHz (scaled from 0.0 MHz), 37.9 kHz, 60.0 Hz
[ 1747.190] (II) VBoxVideo(0): Modeline "VBoxDynamicMode"x0.0 39.78 1043 1045 1047 1049 626 628 630 632 (37.9 kHz)
[ 1747.190] (**) VBoxVideo(0): Built-in mode "VBox-800x600": 29.3 MHz (scaled from 0.0 MHz), 36.4 kHz, 60.0 Hz
[ 1747.190] (II) VBoxVideo(0): Modeline "VBox-800x600"x0.0 29.31 800 802 804 806 600 602 604 606 (36.4 kHz)
[ 1747.190] (**) VBoxVideo(0): Built-in mode "VBox-640x480": 18.8 MHz (scaled from 0.0 MHz), 29.2 kHz, 60.0 Hz
[ 1747.190] (II) VBoxVideo(0): Modeline "VBox-640x480"x0.0 18.84 640 642 644 646 480 482 484 486 (29.2 kHz)
[ 1747.190] (II) VBoxVideo(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
[ 1747.190] (==) VBoxVideo(0): RGB weight 888
[ 1747.190] (==) VBoxVideo(0): Default visual is TrueColor
[ 1747.190] (==) VBoxVideo(0): Using gamma correction (1.0, 1.0, 1.0)
[ 1747.190] (==) VBoxVideo(0): DPI set to (96, 96)
[ 1747.190] (--) Depth 24 pixmap format is 32 bpp
[ 1748.083] drmOpenDevice: node name is /dev/dri/card0
[ 1748.088] drmOpenDevice: node name is /dev/dri/card0
[ 1748.104] [drm] failed to load kernel module "vboxvideo"
[ 1748.104] (EE) [drm] drmOpen failed.
[ 1748.104] (EE) VBoxVideo(0): DRIScreenInit failed, disabling DRI.
[ 1748.104] (II) VBoxVideo(0): visual configurations initialized
[ 1748.105] (II) VBoxVideo(0): Requested monitor count: 1
[ 1748.105] (II) VBoxVideo(0): Output VBOX0 has no monitor section
[ 1748.105] (II) VBoxVideo(0): Output VBOX0 has no monitor section
[ 1748.105] (II) VBoxVideo(0): EDID for output VBOX0
[ 1748.105] (II) VBoxVideo(0): Manufacturer: VBX Model: 0 Serial#: 41026579
[ 1748.105] (II) VBoxVideo(0): Year: 1990 Week: 1
[ 1748.105] (II) VBoxVideo(0): EDID Version: 1.3
[ 1748.105] (II) VBoxVideo(0): Digital Display Input
[ 1748.105] (II) VBoxVideo(0): Indeterminate output size
[ 1748.105] (II) VBoxVideo(0): Gamma: 2.20
[ 1748.105] (II) VBoxVideo(0): DPMS capabilities: StandBy Suspend Off
[ 1748.105] (II) VBoxVideo(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[ 1748.105] (II) VBoxVideo(0): Default color space is primary color space
[ 1748.105] (II) VBoxVideo(0): First detailed timing is preferred mode
[ 1748.105] (II) VBoxVideo(0): redX: 0.640 redY: 0.330 greenX: 0.300 greenY: 0.600
[ 1748.105] (II) VBoxVideo(0): blueX: 0.150 blueY: 0.060 whiteX: 0.312 whiteY: 0.329
[ 1748.105] (II) VBoxVideo(0): Manufacturer's mask: 0
[ 1748.105] (II) VBoxVideo(0): Supported detailed timing:
[ 1748.105] (II) VBoxVideo(0): clock: 39.8 MHz Image Size: 0 x 0 mm
[ 1748.105] (II) VBoxVideo(0): h_active: 1043 h_sync: 1045 h_sync_end 1047 h_blank_end 1049 h_border: 0
[ 1748.105] (II) VBoxVideo(0): v_active: 626 v_sync: 628 v_sync_end 630 v_blanking: 632 v_border: 0
[ 1748.105] (II) VBoxVideo(0): Ranges: V min: 0 V max: 200 Hz, H min: 0 H max: 200 kHz, PixClock max 1005 MHz
[ 1748.105] (II) VBoxVideo(0): Monitor name: VBOX monitor
[ 1748.105] (II) VBoxVideo(0): EDID (in hex):
[ 1748.105] (II) VBoxVideo(0): 00ffffffffffff005858000013047202
[ 1748.105] (II) VBoxVideo(0): 0100010380000078eeee91a3544c9926
[ 1748.105] (II) VBoxVideo(0): 0f505400000001010101010101010101
[ 1748.105] (II) VBoxVideo(0): 010101010101890f1306407206200202
[ 1748.105] (II) VBoxVideo(0): 2200000000000000000000fd0000c800
[ 1748.105] (II) VBoxVideo(0): c864000a202020202020000000fc0056
[ 1748.106] (II) VBoxVideo(0): 424f58206d6f6e69746f720a00000010
[ 1748.106] (II) VBoxVideo(0): 000a202020202020202020202020002b
[ 1748.106] (II) VBoxVideo(0): EDID vendor "VBX", prod id 0
[ 1748.106] (II) VBoxVideo(0): DDCModeFromDetailedTiming: 1043x626 Warning: We only handle separate sync.
[ 1748.106] (II) VBoxVideo(0): Using hsync ranges from config file
[ 1748.106] (II) VBoxVideo(0): Using vrefresh ranges from config file
[ 1748.106] (II) VBoxVideo(0): Printing DDC gathered Modelines:
[ 1748.106] (II) VBoxVideo(0): Modeline "1043x626"x0.0 39.77 1043 1045 1047 1049 626 628 630 632 -hsync -vsync (37.9 kHz)
[ 1748.106] (II) VBoxVideo(0): Printing probed modes for output VBOX0
[ 1748.106] (II) VBoxVideo(0): Modeline "1043x626"x60.0 39.78 1043 1045 1047 1049 626 628 630 632 (37.9 kHz)
[ 1748.106] (II) VBoxVideo(0): Modeline "800x600"x60.0 29.31 800 802 804 806 600 602 604 606 (36.4 kHz)
[ 1748.106] (II) VBoxVideo(0): Modeline "640x480"x60.0 18.84 640 642 644 646 480 482 484 486 (29.2 kHz)
[ 1748.106] (II) VBoxVideo(0): Output VBOX0 connected
[ 1748.106] (II) VBoxVideo(0): Using exact sizes for initial modes
[ 1748.106] (II) VBoxVideo(0): Output VBOX0 using initial mode 1043x626
[ 1748.106] (II) VBoxVideo(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[ 1748.106] (II) VBoxVideo(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 1748.107] (==) VBoxVideo(0): DPMS enabled
[ 1748.107] (--) RandR disabled
[ 1748.107] (II) Initializing built-in extension Generic Event Extension
[ 1748.107] (II) Initializing built-in extension SHAPE
[ 1748.107] (II) Initializing built-in extension MIT-SHM
[ 1748.107] (II) Initializing built-in extension XInputExtension
[ 1748.107] (II) Initializing built-in extension XTEST
[ 1748.107] (II) Initializing built-in extension BIG-REQUESTS
[ 1748.107] (II) Initializing built-in extension SYNC
[ 1748.107] (II) Initializing built-in extension XKEYBOARD
[ 1748.107] (II) Initializing built-in extension XC-MISC
[ 1748.107] (II) Initializing built-in extension XINERAMA
[ 1748.107] (II) Initializing built-in extension XFIXES
[ 1748.107] (II) Initializing built-in extension RENDER
[ 1748.107] (II) Initializing built-in extension RANDR
[ 1748.107] (II) Initializing built-in extension COMPOSITE
[ 1748.107] (II) Initializing built-in extension DAMAGE
[ 1748.118] (II) AIGLX: Screen 0 is not DRI2 capable
[ 1748.118] (II) AIGLX: Screen 0 is not DRI capable
[ 1748.122] (II) AIGLX: Loaded and initialized swrast
[ 1748.122] (II) GLX: Initialized DRISWRAST GL provider for screen 0
[ 1748.122] (II) VBoxVideo(0): Setting screen physical size to 275 x 165
[ 1748.301] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[ 1748.301] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 1748.301] (II) LoadModule: "evdev"
[ 1748.301] (II) Loading /usr/lib64/xorg/modules/input/evdev_drv.so
[ 1748.301] (II) Module evdev: vendor="X.Org Foundation"
[ 1748.301] compiled for 1.11.2, module version = 2.6.0
[ 1748.302] Module class: X.Org XInput Driver
[ 1748.302] ABI class: X.Org XInput driver, version 13.0
[ 1748.302] (II) Using input driver 'evdev' for 'Power Button'
[ 1748.302] (II) Loading /usr/lib64/xorg/modules/input/evdev_drv.so
[ 1748.302] (**) Power Button: always reports core events
[ 1748.302] (**) Power Button: Device: "/dev/input/event3"
[ 1748.302] (--) Power Button: Found keys
[ 1748.302] (II) Power Button: Configuring as keyboard
[ 1748.302] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3/event3"
[ 1748.302] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 1748.302] (**) Option "xkb_rules" "evdev"
[ 1748.302] (**) Option "xkb_model" "evdev"
[ 1748.302] (**) Option "xkb_layout" "us"
[ 1748.343] (II) config/udev: Adding input device Sleep Button (/dev/input/event4)
[ 1748.343] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[ 1748.343] (II) Using input driver 'evdev' for 'Sleep Button'
[ 1748.343] (II) Loading /usr/lib64/xorg/modules/input/evdev_drv.so
[ 1748.343] (**) Sleep Button: always reports core events
[ 1748.343] (**) Sleep Button: Device: "/dev/input/event4"
[ 1748.343] (--) Sleep Button: Found keys
[ 1748.343] (II) Sleep Button: Configuring as keyboard
[ 1748.343] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSLPBN:00/input/input4/event4"
[ 1748.343] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 7)
[ 1748.343] (**) Option "xkb_rules" "evdev"
[ 1748.343] (**) Option "xkb_model" "evdev"
[ 1748.343] (**) Option "xkb_layout" "us"
[ 1748.343] (II) config/udev: Adding input device VirtualBox USB Tablet (/dev/input/event2)
[ 1748.343] (**) VirtualBox USB Tablet: Applying InputClass "evdev pointer catchall"
[ 1748.343] (II) Using input driver 'evdev' for 'VirtualBox USB Tablet'
[ 1748.343] (II) Loading /usr/lib64/xorg/modules/input/evdev_drv.so
[ 1748.343] (**) VirtualBox USB Tablet: always reports core events
[ 1748.343] (**) VirtualBox USB Tablet: Device: "/dev/input/event2"
[ 1748.344] (--) VirtualBox USB Tablet: Found 9 mouse buttons
[ 1748.344] (--) VirtualBox USB Tablet: Found scroll wheel(s)
[ 1748.344] (--) VirtualBox USB Tablet: Found relative axes
[ 1748.344] (--) VirtualBox USB Tablet: Found absolute axes
[ 1748.344] (--) VirtualBox USB Tablet: Found x and y absolute axes
[ 1748.344] (II) VirtualBox USB Tablet: Configuring as mouse
[ 1748.344] (II) VirtualBox USB Tablet: Adding scrollwheel support
[ 1748.344] (**) VirtualBox USB Tablet: YAxisMapping: buttons 4 and 5
[ 1748.344] (**) VirtualBox USB Tablet: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 1748.344] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:06.0/usb1/1-1/1-1:1.0/input/input2/event2"
[ 1748.344] (II) XINPUT: Adding extended input device "VirtualBox USB Tablet" (type: MOUSE, id 8)
[ 1748.344] (EE) VirtualBox USB Tablet: failed to initialize for relative axes.
[ 1748.344] (II) VirtualBox USB Tablet: initialized for absolute axes.
[ 1748.344] (**) VirtualBox USB Tablet: (accel) keeping acceleration scheme 1
[ 1748.344] (**) VirtualBox USB Tablet: (accel) acceleration profile 0
[ 1748.344] (**) VirtualBox USB Tablet: (accel) acceleration factor: 2.000
[ 1748.344] (**) VirtualBox USB Tablet: (accel) acceleration threshold: 4
[ 1748.344] (II) config/udev: Adding input device VirtualBox USB Tablet (/dev/input/js0)
[ 1748.344] (II) No input driver/identifier specified (ignoring)
[ 1748.344] (II) config/udev: Adding input device VirtualBox USB Tablet (/dev/input/mouse1)
[ 1748.344] (II) No input driver/identifier specified (ignoring)
[ 1748.345] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[ 1748.345] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 1748.345] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[ 1748.345] (II) Loading /usr/lib64/xorg/modules/input/evdev_drv.so
[ 1748.345] (**) AT Translated Set 2 keyboard: always reports core events
[ 1748.345] (**) AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[ 1748.345] (--) AT Translated Set 2 keyboard: Found keys
[ 1748.345] (II) AT Translated Set 2 keyboard: Configuring as keyboard
[ 1748.345] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[ 1748.345] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 9)
[ 1748.345] (**) Option "xkb_rules" "evdev"
[ 1748.345] (**) Option "xkb_model" "evdev"
[ 1748.345] (**) Option "xkb_layout" "us"
[ 1748.345] (II) config/udev: Adding input device ImExPS/2 Generic Explorer Mouse (/dev/input/event1)
[ 1748.345] (**) ImExPS/2 Generic Explorer Mouse: Applying InputClass "evdev pointer catchall"
[ 1748.345] (II) Using input driver 'evdev' for 'ImExPS/2 Generic Explorer Mouse'
[ 1748.345] (II) Loading /usr/lib64/xorg/modules/input/evdev_drv.so
[ 1748.345] (**) ImExPS/2 Generic Explorer Mouse: always reports core events
[ 1748.345] (**) ImExPS/2 Generic Explorer Mouse: Device: "/dev/input/event1"
[ 1748.345] (--) ImExPS/2 Generic Explorer Mouse: Found 9 mouse buttons
[ 1748.345] (--) ImExPS/2 Generic Explorer Mouse: Found scroll wheel(s)
[ 1748.345] (--) ImExPS/2 Generic Explorer Mouse: Found relative axes
[ 1748.345] (--) ImExPS/2 Generic Explorer Mouse: Found x and y relative axes
[ 1748.345] (II) ImExPS/2 Generic Explorer Mouse: Configuring as mouse
[ 1748.345] (II) ImExPS/2 Generic Explorer Mouse: Adding scrollwheel support
[ 1748.345] (**) ImExPS/2 Generic Explorer Mouse: YAxisMapping: buttons 4 and 5
[ 1748.345] (**) ImExPS/2 Generic Explorer Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 1748.345] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input1/event1"
[ 1748.345] (II) XINPUT: Adding extended input device "ImExPS/2 Generic Explorer Mouse" (type: MOUSE, id 10)
[ 1748.345] (II) ImExPS/2 Generic Explorer Mouse: initialized for relative axes.
[ 1748.345] (**) ImExPS/2 Generic Explorer Mouse: (accel) keeping acceleration scheme 1
[ 1748.345] (**) ImExPS/2 Generic Explorer Mouse: (accel) acceleration profile 0
[ 1748.346] (**) ImExPS/2 Generic Explorer Mouse: (accel) acceleration factor: 2.000
[ 1748.346] (**) ImExPS/2 Generic Explorer Mouse: (accel) acceleration threshold: 4
[ 1748.346] (II) config/udev: Adding input device ImExPS/2 Generic Explorer Mouse (/dev/input/mouse0)
[ 1748.346] (II) No input driver/identifier specified (ignoring)
[ 1748.346] (II) config/udev: Adding input device PC Speaker (/dev/input/event5)
[ 1748.346] (II) No input driver/identifier specified (ignoring)
[ 1748.346] (II) config/udev: Adding input device VirtualBox mouse integration (/dev/input/event6)
[ 1748.346] (**) VirtualBox mouse integration: Applying InputClass "evdev pointer catchall"
[ 1748.346] (II) Using input driver 'evdev' for 'VirtualBox mouse integration'
[ 1748.346] (II) Loading /usr/lib64/xorg/modules/input/evdev_drv.so
[ 1748.346] (**) VirtualBox mouse integration: always reports core events
[ 1748.346] (**) VirtualBox mouse integration: Device: "/dev/input/event6"
[ 1748.346] (--) VirtualBox mouse integration: Found 1 mouse buttons
[ 1748.346] (--) VirtualBox mouse integration: Found absolute axes
[ 1748.346] (--) VirtualBox mouse integration: Found x and y absolute axes
[ 1748.346] (II) VirtualBox mouse integration: Configuring as mouse
[ 1748.346] (**) VirtualBox mouse integration: YAxisMapping: buttons 4 and 5
[ 1748.346] (**) VirtualBox mouse integration: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 1748.346] (**) Option "config_info" "udev:/sys/devices/virtual/input/input6/event6"
[ 1748.346] (II) XINPUT: Adding extended input device "VirtualBox mouse integration" (type: MOUSE, id 11)
[ 1748.346] (II) VirtualBox mouse integration: initialized for absolute axes.
[ 1748.347] (**) VirtualBox mouse integration: (accel) keeping acceleration scheme 1
[ 1748.347] (**) VirtualBox mouse integration: (accel) acceleration profile 0
[ 1748.347] (**) VirtualBox mouse integration: (accel) acceleration factor: 2.000
[ 1748.347] (**) VirtualBox mouse integration: (accel) acceleration threshold: 4
|
|
|
Back to top |
|
|
Rexilion Veteran
Joined: 17 Mar 2009 Posts: 1044
|
Posted: Sat Jun 02, 2012 1:38 pm Post subject: |
|
|
I see the following in your log:
Quote: | [ 1748.083] drmOpenDevice: node name is /dev/dri/card0
[ 1748.088] drmOpenDevice: node name is /dev/dri/card0
[ 1748.104] [drm] failed to load kernel module "vboxvideo"
[ 1748.104] (EE) [drm] drmOpen failed.
[ 1748.104] (EE) VBoxVideo(0): DRIScreenInit failed, disabling DRI. |
Looks like you didn't (properly) install the virtual vbox video driver? Mayba a:
Might help?
Otherwise post the output of (in the guest:)
Quote: | find /lib/modules/"`uname -r`"/ -name \*.ko |
Please.
Good luck! |
|
Back to top |
|
|
jimqode n00b
Joined: 31 May 2012 Posts: 3
|
Posted: Sat Jun 02, 2012 5:13 pm Post subject: |
|
|
Thank you. You were right, I forgot the recompile vboxvideo driver after a kernel recompile. I fixed it now, however it still doesn't resize.
Here is the new log:
Code: |
# cat /var/log/Xorg.0.log
[ 632.915]
X.Org X Server 1.11.2
Release Date: 2011-11-04
[ 632.919] X Protocol Version 11, Revision 0
[ 632.920] Build Operating System: Linux 3.2.12-gentoo x86_64 Gentoo
[ 632.921] Current Operating System: Linux jimmies 3.2.12-gentoo #3 SMP Thu May 31 20:04:22 EEST 2012 x86_64
[ 632.922] Kernel command line: root=/dev/sda3
[ 632.923] Build Date: 31 May 2012 12:39:34AM
[ 632.924]
[ 632.924] Current version of pixman: 0.24.0
[ 632.925] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 632.927] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 632.932] (==) Log file: "/var/log/Xorg.0.log", Time: Sat Jun 2 20:03:37 2012
[ 632.976] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 632.986] (==) No Layout section. Using the first Screen section.
[ 632.987] (==) No screen section available. Using defaults.
[ 632.987] (**) |-->Screen "Default Screen Section" (0)
[ 632.987] (**) | |-->Monitor "<default monitor>"
[ 632.996] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 632.997] (==) Automatically adding devices
[ 632.997] (==) Automatically enabling devices
[ 633.132] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/OTF/,
/usr/share/fonts/Type1/,
/usr/share/fonts/100dpi/,
/usr/share/fonts/75dpi/
[ 633.132] (==) ModulePath set to "/usr/lib64/xorg/modules"
[ 633.132] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 633.132] (II) Loader magic: 0x7cfac0
[ 633.132] (II) Module ABI versions:
[ 633.132] X.Org ANSI C Emulation: 0.4
[ 633.132] X.Org Video Driver: 11.0
[ 633.132] X.Org XInput driver : 13.0
[ 633.132] X.Org Server Extension : 6.0
[ 633.140] (--) PCI:*(0:0:2:0) 80ee:beef:0000:0000 rev 0, Mem @ 0xe0000000/67108864
[ 633.140] (II) LoadModule: "extmod"
[ 633.155] (II) Loading /usr/lib64/xorg/modules/extensions/libextmod.so
[ 633.182] (II) Module extmod: vendor="X.Org Foundation"
[ 633.182] compiled for 1.11.2, module version = 1.0.0
[ 633.183] Module class: X.Org Server Extension
[ 633.183] ABI class: X.Org Server Extension, version 6.0
[ 633.183] (II) Loading extension MIT-SCREEN-SAVER
[ 633.183] (II) Loading extension XFree86-VidModeExtension
[ 633.183] (II) Loading extension XFree86-DGA
[ 633.183] (II) Loading extension DPMS
[ 633.183] (II) Loading extension XVideo
[ 633.183] (II) Loading extension XVideo-MotionCompensation
[ 633.183] (II) Loading extension X-Resource
[ 633.183] (II) LoadModule: "dbe"
[ 633.183] (II) Loading /usr/lib64/xorg/modules/extensions/libdbe.so
[ 633.185] (II) Module dbe: vendor="X.Org Foundation"
[ 633.185] compiled for 1.11.2, module version = 1.0.0
[ 633.186] Module class: X.Org Server Extension
[ 633.186] ABI class: X.Org Server Extension, version 6.0
[ 633.186] (II) Loading extension DOUBLE-BUFFER
[ 633.186] (II) LoadModule: "glx"
[ 633.286] (II) Loading /usr/lib64/xorg/modules/extensions/libglx.so
[ 633.313] (II) Module glx: vendor="X.Org Foundation"
[ 633.314] compiled for 1.11.2, module version = 1.0.0
[ 633.314] ABI class: X.Org Server Extension, version 6.0
[ 633.314] (==) AIGLX enabled
[ 633.314] (II) Loading extension GLX
[ 633.314] (II) LoadModule: "record"
[ 633.314] (II) Loading /usr/lib64/xorg/modules/extensions/librecord.so
[ 633.316] (II) Module record: vendor="X.Org Foundation"
[ 633.316] compiled for 1.11.2, module version = 1.13.0
[ 633.316] Module class: X.Org Server Extension
[ 633.316] ABI class: X.Org Server Extension, version 6.0
[ 633.316] (II) Loading extension RECORD
[ 633.316] (II) LoadModule: "dri"
[ 633.317] (II) Loading /usr/lib64/xorg/modules/extensions/libdri.so
[ 633.319] (II) Module dri: vendor="X.Org Foundation"
[ 633.319] compiled for 1.11.2, module version = 1.0.0
[ 633.319] ABI class: X.Org Server Extension, version 6.0
[ 633.319] (II) Loading extension XFree86-DRI
[ 633.319] (II) LoadModule: "dri2"
[ 633.320] (II) Loading /usr/lib64/xorg/modules/extensions/libdri2.so
[ 633.321] (II) Module dri2: vendor="X.Org Foundation"
[ 633.322] compiled for 1.11.2, module version = 1.2.0
[ 633.322] ABI class: X.Org Server Extension, version 6.0
[ 633.322] (II) Loading extension DRI2
[ 633.322] (==) Matched vboxvideo as autoconfigured driver 0
[ 633.322] (==) Matched vesa as autoconfigured driver 1
[ 633.322] (==) Matched fbdev as autoconfigured driver 2
[ 633.322] (==) Assigned the driver to the xf86ConfigLayout
[ 633.322] (II) LoadModule: "vboxvideo"
[ 633.322] (II) Loading /usr/lib64/xorg/modules/drivers/vboxvideo_drv.so
[ 633.323] (II) Module vboxvideo: vendor="Oracle Corporation"
[ 633.323] compiled for 1.5.99.901, module version = 1.0.1
[ 633.323] Module class: X.Org Video Driver
[ 633.323] ABI class: X.Org Video Driver, version 11.0
[ 633.323] (**) Load address of symbol "VBOXVIDEO" is 0x7f83a94bd400
[ 633.323] (II) LoadModule: "vesa"
[ 633.324] (WW) Warning, couldn't open module vesa
[ 633.324] (II) UnloadModule: "vesa"
[ 633.324] (II) Unloading vesa
[ 633.324] (EE) Failed to load module "vesa" (module does not exist, 0)
[ 633.328] (II) LoadModule: "fbdev"
[ 633.328] (WW) Warning, couldn't open module fbdev
[ 633.328] (II) UnloadModule: "fbdev"
[ 633.328] (II) Unloading fbdev
[ 633.328] (EE) Failed to load module "fbdev" (module does not exist, 0)
[ 633.332] (II) VBoxVideo: guest driver for VirtualBox: vbox
[ 633.332] (--) using VT number 7
[ 633.375] (II) Loading /usr/lib64/xorg/modules/drivers/vboxvideo_drv.so
[ 633.375] (II) VBoxVideo(0): VirtualBox guest additions video driver version 4.1.16_OSE
[ 633.382] (II) Loading sub module "ramdac"
[ 633.382] (II) LoadModule: "ramdac"
[ 633.382] (II) Module "ramdac" already built-in
[ 633.382] (II) Loading sub module "fb"
[ 633.383] (II) LoadModule: "fb"
[ 633.383] (II) Loading /usr/lib64/xorg/modules/libfb.so
[ 633.387] (II) Module fb: vendor="X.Org Foundation"
[ 633.387] compiled for 1.11.2, module version = 1.0.0
[ 633.387] ABI class: X.Org ANSI C Emulation, version 0.4
[ 633.387] (II) Loading sub module "shadowfb"
[ 633.387] (II) LoadModule: "shadowfb"
[ 633.387] (II) Loading /usr/lib64/xorg/modules/libshadowfb.so
[ 633.389] (II) Module shadowfb: vendor="X.Org Foundation"
[ 633.389] compiled for 1.11.2, module version = 1.0.0
[ 633.389] ABI class: X.Org ANSI C Emulation, version 0.4
[ 633.389] (II) Loading sub module "vgahw"
[ 633.389] (II) LoadModule: "vgahw"
[ 633.389] (II) Loading /usr/lib64/xorg/modules/libvgahw.so
[ 633.391] (II) Module vgahw: vendor="X.Org Foundation"
[ 633.391] compiled for 1.11.2, module version = 0.1.0
[ 633.391] ABI class: X.Org Video Driver, version 11.0
[ 633.391] (II) Loading sub module "dri"
[ 633.391] (II) LoadModule: "dri"
[ 633.392] (II) Loading /usr/lib64/xorg/modules/extensions/libdri.so
[ 633.392] (II) Module dri: vendor="X.Org Foundation"
[ 633.392] compiled for 1.11.2, module version = 1.0.0
[ 633.392] ABI class: X.Org Server Extension, version 6.0
[ 633.393] (II) VBoxVideo(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 633.394] (==) VBoxVideo(0): Depth 24, (--) framebuffer bpp 32
[ 633.394] (--) VBoxVideo(0): Virtual size is 32000x32000 (pitch 32000)
[ 633.394] (**) VBoxVideo(0): Built-in mode "VBoxInitialMode": 39.8 MHz (scaled from 0.0 MHz), 37.9 kHz, 60.0 Hz
[ 633.394] (II) VBoxVideo(0): Modeline "VBoxInitialMode"x0.0 39.78 1043 1045 1047 1049 626 628 630 632 (37.9 kHz)
[ 633.394] (**) VBoxVideo(0): Built-in mode "VBoxDynamicMode": 39.8 MHz (scaled from 0.0 MHz), 37.9 kHz, 60.0 Hz
[ 633.394] (II) VBoxVideo(0): Modeline "VBoxDynamicMode"x0.0 39.78 1043 1045 1047 1049 626 628 630 632 (37.9 kHz)
[ 633.394] (**) VBoxVideo(0): Built-in mode "VBoxDynamicMode": 39.8 MHz (scaled from 0.0 MHz), 37.9 kHz, 60.0 Hz
[ 633.394] (II) VBoxVideo(0): Modeline "VBoxDynamicMode"x0.0 39.78 1043 1045 1047 1049 626 628 630 632 (37.9 kHz)
[ 633.394] (**) VBoxVideo(0): Built-in mode "VBox-800x600": 29.3 MHz (scaled from 0.0 MHz), 36.4 kHz, 60.0 Hz
[ 633.394] (II) VBoxVideo(0): Modeline "VBox-800x600"x0.0 29.31 800 802 804 806 600 602 604 606 (36.4 kHz)
[ 633.394] (**) VBoxVideo(0): Built-in mode "VBox-640x480": 18.8 MHz (scaled from 0.0 MHz), 29.2 kHz, 60.0 Hz
[ 633.394] (II) VBoxVideo(0): Modeline "VBox-640x480"x0.0 18.84 640 642 644 646 480 482 484 486 (29.2 kHz)
[ 633.394] (II) VBoxVideo(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
[ 633.394] (==) VBoxVideo(0): RGB weight 888
[ 633.394] (==) VBoxVideo(0): Default visual is TrueColor
[ 633.394] (==) VBoxVideo(0): Using gamma correction (1.0, 1.0, 1.0)
[ 633.395] (==) VBoxVideo(0): DPI set to (96, 96)
[ 633.395] (--) Depth 24 pixmap format is 32 bpp
[ 634.302] drmOpenDevice: node name is /dev/dri/card0
[ 634.302] drmOpenDevice: open result is 11, (OK)
[ 634.302] drmOpenDevice: node name is /dev/dri/card0
[ 634.302] drmOpenDevice: open result is 11, (OK)
[ 634.303] drmOpenByBusid: Searching for BusID pci:0000:00:02.0
[ 634.303] drmOpenDevice: node name is /dev/dri/card0
[ 634.303] drmOpenDevice: open result is 11, (OK)
[ 634.303] drmOpenByBusid: drmOpenMinor returns 11
[ 634.303] drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
[ 634.303] (II) [drm] DRM interface version 1.4
[ 634.303] (II) [drm] DRM open master succeeded.
[ 634.303] (II) VBoxVideo(0): [drm] Using the DRM lock SAREA also for drawables.
[ 634.303] (II) VBoxVideo(0): [drm] framebuffer handle = 0xe0000000
[ 634.303] (II) VBoxVideo(0): [drm] added 1 reserved context for kernel
[ 634.304] (II) VBoxVideo(0): X context handle = 0x1
[ 634.304] (II) VBoxVideo(0): [drm] installed DRM signal handler
[ 634.304] (II) VBoxVideo(0): visual configurations initialized
[ 634.310] (II) VBoxVideo(0): Requested monitor count: 1
[ 634.311] (II) VBoxVideo(0): Output VBOX0 has no monitor section
[ 634.311] (II) VBoxVideo(0): Output VBOX0 has no monitor section
[ 634.312] (II) VBoxVideo(0): EDID for output VBOX0
[ 634.312] (II) VBoxVideo(0): Manufacturer: VBX Model: 0 Serial#: 41026579
[ 634.312] (II) VBoxVideo(0): Year: 1990 Week: 1
[ 634.312] (II) VBoxVideo(0): EDID Version: 1.3
[ 634.312] (II) VBoxVideo(0): Digital Display Input
[ 634.313] (II) VBoxVideo(0): Indeterminate output size
[ 634.313] (II) VBoxVideo(0): Gamma: 2.20
[ 634.313] (II) VBoxVideo(0): DPMS capabilities: StandBy Suspend Off
[ 634.313] (II) VBoxVideo(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[ 634.313] (II) VBoxVideo(0): Default color space is primary color space
[ 634.313] (II) VBoxVideo(0): First detailed timing is preferred mode
[ 634.313] (II) VBoxVideo(0): redX: 0.640 redY: 0.330 greenX: 0.300 greenY: 0.600
[ 634.313] (II) VBoxVideo(0): blueX: 0.150 blueY: 0.060 whiteX: 0.312 whiteY: 0.329
[ 634.313] (II) VBoxVideo(0): Manufacturer's mask: 0
[ 634.313] (II) VBoxVideo(0): Supported detailed timing:
[ 634.313] (II) VBoxVideo(0): clock: 39.8 MHz Image Size: 0 x 0 mm
[ 634.313] (II) VBoxVideo(0): h_active: 1043 h_sync: 1045 h_sync_end 1047 h_blank_end 1049 h_border: 0
[ 634.313] (II) VBoxVideo(0): v_active: 626 v_sync: 628 v_sync_end 630 v_blanking: 632 v_border: 0
[ 634.313] (II) VBoxVideo(0): Ranges: V min: 0 V max: 200 Hz, H min: 0 H max: 200 kHz, PixClock max 1005 MHz
[ 634.313] (II) VBoxVideo(0): Monitor name: VBOX monitor
[ 634.313] (II) VBoxVideo(0): EDID (in hex):
[ 634.313] (II) VBoxVideo(0): 00ffffffffffff005858000013047202
[ 634.314] (II) VBoxVideo(0): 0100010380000078eeee91a3544c9926
[ 634.314] (II) VBoxVideo(0): 0f505400000001010101010101010101
[ 634.314] (II) VBoxVideo(0): 010101010101890f1306407206200202
[ 634.314] (II) VBoxVideo(0): 2200000000000000000000fd0000c800
[ 634.314] (II) VBoxVideo(0): c864000a202020202020000000fc0056
[ 634.314] (II) VBoxVideo(0): 424f58206d6f6e69746f720a00000010
[ 634.314] (II) VBoxVideo(0): 000a202020202020202020202020002b
[ 634.314] (II) VBoxVideo(0): EDID vendor "VBX", prod id 0
[ 634.314] (II) VBoxVideo(0): DDCModeFromDetailedTiming: 1043x626 Warning: We only handle separate sync.
[ 634.314] (II) VBoxVideo(0): Using hsync ranges from config file
[ 634.314] (II) VBoxVideo(0): Using vrefresh ranges from config file
[ 634.314] (II) VBoxVideo(0): Printing DDC gathered Modelines:
[ 634.314] (II) VBoxVideo(0): Modeline "1043x626"x0.0 39.77 1043 1045 1047 1049 626 628 630 632 -hsync -vsync (37.9 kHz)
[ 634.315] (II) VBoxVideo(0): Printing probed modes for output VBOX0
[ 634.315] (II) VBoxVideo(0): Modeline "1043x626"x60.0 39.78 1043 1045 1047 1049 626 628 630 632 (37.9 kHz)
[ 634.315] (II) VBoxVideo(0): Modeline "800x600"x60.0 29.31 800 802 804 806 600 602 604 606 (36.4 kHz)
[ 634.315] (II) VBoxVideo(0): Modeline "640x480"x60.0 18.84 640 642 644 646 480 482 484 486 (29.2 kHz)
[ 634.315] (II) VBoxVideo(0): Output VBOX0 connected
[ 634.315] (II) VBoxVideo(0): Using exact sizes for initial modes
[ 634.315] (II) VBoxVideo(0): Output VBOX0 using initial mode 1043x626
[ 634.315] (II) VBoxVideo(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[ 634.315] (II) VBoxVideo(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 634.318] (==) VBoxVideo(0): DPMS enabled
[ 634.318] (II) VBoxVideo(0): [DRI] installation complete
[ 634.318] (--) RandR disabled
[ 634.318] (II) Initializing built-in extension Generic Event Extension
[ 634.318] (II) Initializing built-in extension SHAPE
[ 634.318] (II) Initializing built-in extension MIT-SHM
[ 634.318] (II) Initializing built-in extension XInputExtension
[ 634.318] (II) Initializing built-in extension XTEST
[ 634.318] (II) Initializing built-in extension BIG-REQUESTS
[ 634.318] (II) Initializing built-in extension SYNC
[ 634.318] (II) Initializing built-in extension XKEYBOARD
[ 634.318] (II) Initializing built-in extension XC-MISC
[ 634.318] (II) Initializing built-in extension XINERAMA
[ 634.318] (II) Initializing built-in extension XFIXES
[ 634.319] (II) Initializing built-in extension RENDER
[ 634.319] (II) Initializing built-in extension RANDR
[ 634.319] (II) Initializing built-in extension COMPOSITE
[ 634.319] (II) Initializing built-in extension DAMAGE
[ 634.327] (II) AIGLX: Screen 0 is not DRI2 capable
[ 634.327] drmOpenDevice: node name is /dev/dri/card0
[ 634.327] drmOpenDevice: open result is 12, (OK)
[ 634.327] drmOpenByBusid: Searching for BusID pci:0000:00:02.0
[ 634.327] drmOpenDevice: node name is /dev/dri/card0
[ 634.327] drmOpenDevice: open result is 12, (OK)
[ 634.327] drmOpenByBusid: drmOpenMinor returns 12
[ 634.327] drmOpenByBusid: Interface 1.4 failed, trying 1.1
[ 634.327] drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
[ 634.342] (II) Next line is added to allow vboxvideo_drv.so to appear as whitelisted driver
[ 634.342] (II) The file referenced, is *NOT* loaded
[ 634.342] (II) Loading /usr/lib/xorg/modules/drivers//ati_drv.so
[ 634.342] (EE) AIGLX error: vboxvideo does not export required DRI extension
[ 634.342] (EE) AIGLX: reverting to software rendering
[ 635.073] (II) AIGLX: Loaded and initialized swrast
[ 635.073] (II) GLX: Initialized DRISWRAST GL provider for screen 0
[ 635.074] (II) VBoxVideo(0): Setting screen physical size to 275 x 165
[ 635.780] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[ 635.780] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 635.780] (II) LoadModule: "evdev"
[ 635.781] (II) Loading /usr/lib64/xorg/modules/input/evdev_drv.so
[ 635.797] (II) Module evdev: vendor="X.Org Foundation"
[ 635.797] compiled for 1.11.2, module version = 2.6.0
[ 635.797] Module class: X.Org XInput Driver
[ 635.797] ABI class: X.Org XInput driver, version 13.0
[ 635.797] (II) Using input driver 'evdev' for 'Power Button'
[ 635.797] (II) Loading /usr/lib64/xorg/modules/input/evdev_drv.so
[ 635.797] (**) Power Button: always reports core events
[ 635.797] (**) Power Button: Device: "/dev/input/event3"
[ 635.797] (--) Power Button: Found keys
[ 635.797] (II) Power Button: Configuring as keyboard
[ 635.797] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3/event3"
[ 635.797] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 635.797] (**) Option "xkb_rules" "evdev"
[ 635.797] (**) Option "xkb_model" "evdev"
[ 635.797] (**) Option "xkb_layout" "us"
[ 635.847] (II) config/udev: Adding input device Sleep Button (/dev/input/event4)
[ 635.848] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[ 635.848] (II) Using input driver 'evdev' for 'Sleep Button'
[ 635.848] (II) Loading /usr/lib64/xorg/modules/input/evdev_drv.so
[ 635.848] (**) Sleep Button: always reports core events
[ 635.848] (**) Sleep Button: Device: "/dev/input/event4"
[ 635.848] (--) Sleep Button: Found keys
[ 635.848] (II) Sleep Button: Configuring as keyboard
[ 635.848] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSLPBN:00/input/input4/event4"
[ 635.848] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 7)
[ 635.848] (**) Option "xkb_rules" "evdev"
[ 635.848] (**) Option "xkb_model" "evdev"
[ 635.849] (**) Option "xkb_layout" "us"
[ 635.851] (II) config/udev: Adding input device VirtualBox USB Tablet (/dev/input/event2)
[ 635.851] (**) VirtualBox USB Tablet: Applying InputClass "evdev pointer catchall"
[ 635.851] (II) Using input driver 'evdev' for 'VirtualBox USB Tablet'
[ 635.851] (II) Loading /usr/lib64/xorg/modules/input/evdev_drv.so
[ 635.851] (**) VirtualBox USB Tablet: always reports core events
[ 635.851] (**) VirtualBox USB Tablet: Device: "/dev/input/event2"
[ 635.851] (--) VirtualBox USB Tablet: Found 9 mouse buttons
[ 635.851] (--) VirtualBox USB Tablet: Found scroll wheel(s)
[ 635.851] (--) VirtualBox USB Tablet: Found relative axes
[ 635.851] (--) VirtualBox USB Tablet: Found absolute axes
[ 635.851] (--) VirtualBox USB Tablet: Found x and y absolute axes
[ 635.851] (II) VirtualBox USB Tablet: Configuring as mouse
[ 635.851] (II) VirtualBox USB Tablet: Adding scrollwheel support
[ 635.852] (**) VirtualBox USB Tablet: YAxisMapping: buttons 4 and 5
[ 635.852] (**) VirtualBox USB Tablet: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 635.852] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:06.0/usb1/1-1/1-1:1.0/input/input2/event2"
[ 635.852] (II) XINPUT: Adding extended input device "VirtualBox USB Tablet" (type: MOUSE, id 8)
[ 635.852] (EE) VirtualBox USB Tablet: failed to initialize for relative axes.
[ 635.852] (II) VirtualBox USB Tablet: initialized for absolute axes.
[ 635.853] (**) VirtualBox USB Tablet: (accel) keeping acceleration scheme 1
[ 635.853] (**) VirtualBox USB Tablet: (accel) acceleration profile 0
[ 635.853] (**) VirtualBox USB Tablet: (accel) acceleration factor: 2.000
[ 635.853] (**) VirtualBox USB Tablet: (accel) acceleration threshold: 4
[ 635.853] (II) config/udev: Adding input device VirtualBox USB Tablet (/dev/input/js0)
[ 635.853] (II) No input driver/identifier specified (ignoring)
[ 635.854] (II) config/udev: Adding input device VirtualBox USB Tablet (/dev/input/mouse1)
[ 635.854] (II) No input driver/identifier specified (ignoring)
[ 635.855] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[ 635.855] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 635.855] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[ 635.855] (II) Loading /usr/lib64/xorg/modules/input/evdev_drv.so
[ 635.855] (**) AT Translated Set 2 keyboard: always reports core events
[ 635.855] (**) AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[ 635.855] (--) AT Translated Set 2 keyboard: Found keys
[ 635.855] (II) AT Translated Set 2 keyboard: Configuring as keyboard
[ 635.855] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[ 635.855] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 9)
[ 635.855] (**) Option "xkb_rules" "evdev"
[ 635.855] (**) Option "xkb_model" "evdev"
[ 635.855] (**) Option "xkb_layout" "us"
[ 635.857] (II) config/udev: Adding input device ImExPS/2 Generic Explorer Mouse (/dev/input/event1)
[ 635.857] (**) ImExPS/2 Generic Explorer Mouse: Applying InputClass "evdev pointer catchall"
[ 635.857] (II) Using input driver 'evdev' for 'ImExPS/2 Generic Explorer Mouse'
[ 635.857] (II) Loading /usr/lib64/xorg/modules/input/evdev_drv.so
[ 635.857] (**) ImExPS/2 Generic Explorer Mouse: always reports core events
[ 635.857] (**) ImExPS/2 Generic Explorer Mouse: Device: "/dev/input/event1"
[ 635.857] (--) ImExPS/2 Generic Explorer Mouse: Found 9 mouse buttons
[ 635.857] (--) ImExPS/2 Generic Explorer Mouse: Found scroll wheel(s)
[ 635.857] (--) ImExPS/2 Generic Explorer Mouse: Found relative axes
[ 635.857] (--) ImExPS/2 Generic Explorer Mouse: Found x and y relative axes
[ 635.857] (II) ImExPS/2 Generic Explorer Mouse: Configuring as mouse
[ 635.857] (II) ImExPS/2 Generic Explorer Mouse: Adding scrollwheel support
[ 635.857] (**) ImExPS/2 Generic Explorer Mouse: YAxisMapping: buttons 4 and 5
[ 635.857] (**) ImExPS/2 Generic Explorer Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 635.857] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input1/event1"
[ 635.857] (II) XINPUT: Adding extended input device "ImExPS/2 Generic Explorer Mouse" (type: MOUSE, id 10)
[ 635.858] (II) ImExPS/2 Generic Explorer Mouse: initialized for relative axes.
[ 635.858] (**) ImExPS/2 Generic Explorer Mouse: (accel) keeping acceleration scheme 1
[ 635.858] (**) ImExPS/2 Generic Explorer Mouse: (accel) acceleration profile 0
[ 635.858] (**) ImExPS/2 Generic Explorer Mouse: (accel) acceleration factor: 2.000
[ 635.858] (**) ImExPS/2 Generic Explorer Mouse: (accel) acceleration threshold: 4
[ 635.859] (II) config/udev: Adding input device ImExPS/2 Generic Explorer Mouse (/dev/input/mouse0)
[ 635.859] (II) No input driver/identifier specified (ignoring)
[ 635.859] (II) config/udev: Adding input device PC Speaker (/dev/input/event5)
[ 635.859] (II) No input driver/identifier specified (ignoring)
[ 635.860] (II) config/udev: Adding input device VirtualBox mouse integration (/dev/input/event6)
[ 635.860] (**) VirtualBox mouse integration: Applying InputClass "evdev pointer catchall"
[ 635.860] (II) Using input driver 'evdev' for 'VirtualBox mouse integration'
[ 635.860] (II) Loading /usr/lib64/xorg/modules/input/evdev_drv.so
[ 635.860] (**) VirtualBox mouse integration: always reports core events
[ 635.860] (**) VirtualBox mouse integration: Device: "/dev/input/event6"
[ 635.860] (--) VirtualBox mouse integration: Found 1 mouse buttons
[ 635.860] (--) VirtualBox mouse integration: Found absolute axes
[ 635.860] (--) VirtualBox mouse integration: Found x and y absolute axes
[ 635.860] (II) VirtualBox mouse integration: Configuring as mouse
[ 635.860] (**) VirtualBox mouse integration: YAxisMapping: buttons 4 and 5
[ 635.860] (**) VirtualBox mouse integration: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 635.860] (**) Option "config_info" "udev:/sys/devices/virtual/input/input6/event6"
[ 635.860] (II) XINPUT: Adding extended input device "VirtualBox mouse integration" (type: MOUSE, id 11)
[ 635.860] (II) VirtualBox mouse integration: initialized for absolute axes.
[ 635.860] (**) VirtualBox mouse integration: (accel) keeping acceleration scheme 1
[ 635.860] (**) VirtualBox mouse integration: (accel) acceleration profile 0
[ 635.860] (**) VirtualBox mouse integration: (accel) acceleration factor: 2.000
[ 635.860] (**) VirtualBox mouse integration: (accel) acceleration threshold: 4
[ 727.377] (II) VBoxVideo(0): EDID vendor "VBX", prod id 0
[ 727.378] (II) VBoxVideo(0): DDCModeFromDetailedTiming: 1240x614 Warning: We only handle separate sync.
[ 727.378] (II) VBoxVideo(0): Using hsync ranges from config file
[ 727.378] (II) VBoxVideo(0): Using vrefresh ranges from config file
[ 727.378] (II) VBoxVideo(0): Printing DDC gathered Modelines:
[ 727.378] (II) VBoxVideo(0): Modeline "1240x614"x0.0 46.35 1240 1242 1244 1246 614 616 618 620 -hsync -vsync (37.2 kHz)
# lsmod
Module Size Used by
vboxvideo 1742 1
drm 155368 2 vboxvideo
vboxsf 27508 0
ipv6 226785 16
ppdev 4918 0
i2c_piix4 7704 0
parport_pc 27566 0
i2c_core 16191 2 drm,i2c_piix4
parport 25143 2 ppdev,parport_pc
processor 24479 0
pata_acpi 3016 0
thermal_sys 12530 1 processor
sg 20996 0
ata_piix 20807 0
vboxguest 145773 3 vboxsf
pcspkr 1699 0
battery 10675 0
ac 3081 0
joydev 8599 0
button 4247 0
|
|
|
Back to top |
|
|
Rexilion Veteran
Joined: 17 Mar 2009 Posts: 1044
|
Posted: Sat Jun 02, 2012 5:39 pm Post subject: |
|
|
Okay, so X works now.
Did you do:
/etc/init.d/vboxadd setup
or anything like that? I think you need to reconfigure after you changed the installation (i.e. rebuild vboxvideo).
Are you using an OpenGL3 compositing manager (on top of i3 maybe?)
Dit you activate the mode in VirtualBox? (i.e. maybe host key + C ?) |
|
Back to top |
|
|
jimqode n00b
Joined: 31 May 2012 Posts: 3
|
Posted: Sun Jun 03, 2012 12:07 am Post subject: |
|
|
There is no /etc/init.d/vboxadd file. There is a virtualbox-guest-additions script there but it doesn't have setup or similar parameter.
I'm not using a compositing manager. In fact I tried running X server with no other client than a single xterm, it didn't work either.
The mode is activated on VirtualBox and it does not complain about anything. Option is not grayed out either. |
|
Back to top |
|
|
BurningHero n00b
Joined: 28 Aug 2012 Posts: 4 Location: Austin, TX
|
Posted: Tue Sep 04, 2012 6:42 am Post subject: |
|
|
Okay, folks. I was following a few different guides on setting up Virtualbox Guest Additions and I didn't see anything about vboxvideo until way late in the game. I am very new to Gentoo. I also cannot resize the video. I even tried VBoxClient --display. The option is still greyed out.
Looks like you didn't (properly) install the virtual vbox video driver? Mayba a:
Error for unknown symbol
dmesg -c returns:
vboxvideo: Unknown symbol drm_* (lists about 12 items)
So obviously I missed something. I think this means I need to recompile my kernel. I've not done this before... I am not even sure if that is what I need to do.
I appreciate your kindness and consideration.
-Hero _________________ machine. Unexpectedly, I build a time |
|
Back to top |
|
|
solamour l33t
Joined: 21 Dec 2004 Posts: 698 Location: San Diego, CA
|
Posted: Fri Jun 27, 2014 7:55 pm Post subject: |
|
|
I know it's an old topic, so I hope all the issues are resolved by now. In case not, here is what I did.
Win7 x64 host + Gentoo x64 guest
1) emerge -v virtualbox-guest-additions
The version numbers between guest-additions and VirtualBox itself don't need to match exactly. Also, make sure to include "X" use flag.
Code: | /etc/portage/package.use
app-emulation/virtualbox-guest-additions X
|
2) rc-update add virtualbox-guest-additions default
3) usermod -a -G vboxguest YOUR_ACCOUNT_NAME
4) bzcat /usr/share/doc/virtualbox-guest-additions-4.2.24/xorg.conf.vbox.bz2 > /etc/X11/xorg.conf
Your version might be different from mine.
5) Start X if it's not already started.
6) VBoxClient-all (or "VBoxClient --display")
7) HOSTKEY + G (or "View -> Auto-resize Guest Display" from guest's menu)
__
sol |
|
Back to top |
|
|
|
|
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
|
|