Gentoo Forums
Gentoo Forums
Gentoo Forums
Quick Search: in
KDE klauncher(3104) kdemain: No DBUS session-bus found.
View unanswered posts
View posts from last 24 hours

 
Reply to topic    Gentoo Forums Forum Index Desktop Environments
View previous topic :: View next topic  
Author Message
Phredus
n00b
n00b


Joined: 07 Feb 2013
Posts: 47

PostPosted: Thu Jun 12, 2014 7:07 am    Post subject: KDE klauncher(3104) kdemain: No DBUS session-bus found. Reply with quote

I have tried everything i could find and think of.. Please help
Thank you



Code:

klauncher(3104) kdemain: No DBUS session-bus found. Check if you have started the DBUS server.
kdeinit4: Communication error with launcher. Exiting!
kdmgreet(3098)/kdecore (K*TimeZone*): KSystemTimeZones: ktimezoned initialize() D-Bus call failed:  "Not connected to D-Bus server"

kdmgreet(3098)/kdecore (K*TimeZone*): No time zone information obtained from ktimezoned
(EE) Server terminated successfully (0). Closing log file.




Code:
minig ~ # lspci -k | grep -A4 VGA
02:00.0 VGA compatible controller: NVIDIA Corporation ION VGA [GeForce 9400M] (rev b1)
        Subsystem: Hewlett-Packard Company Device 3651
        Kernel driver in use: nvidia
        Kernel modules: nvidia
03:00.0 Network controller: Broadcom Corporation BCM4312 802.11b/g LP-PHY (rev 01)
minig ~ #





Code:

# We always try and start X on a static VT. The various DMs normally default
# to using VT7. If you wish to use the xdm init script, then you should ensure
# that the VT checked is the same VT your DM wants to use. We do this check to
# ensure that you haven't accidentally configured something to run on the VT
# in your /etc/inittab file so that you don't get a dead keyboard.
CHECKVT=7

# What display manager do you use ?  [ xdm | gdm | kdm | gpe | entrance ]
# NOTE: If this is set in /etc/rc.conf, that setting will override this one.
DISPLAYMANAGER="xdm"




Code:
  GNU nano 2.3.2          File: /etc/portage/make.conf                Modified

# These settings were set by the catalyst build script that automatically
# built this stage.
# Please consult /usr/share/portage/config/make.conf.example for a more
# detailed example.
CFLAGS="-O2 -march=atom -pipe"
CXXFLAGS="${CFLAGS}"
# WARNING: Changing your CHOST is not something that should be done lightly.
# Please consult http://www.gentoo.org/doc/en/change-chost.xml before changing.
CHOST="i686-pc-linux-gnu"
# These are the USE flags that were used in addition to what is provided by the
# profile used for building.
USE="bindist symlink x86 -gtk -gnome qt4 kde X nvidia udev xvmc policykit udisk$
PORTDIR="/usr/portage"
DISTDIR="${PORTDIR}/distfiles"
PKGDIR="${PORTDIR}/packages"
MAKEOPTS="-j2"

# This section added by me for X and KDE install#######
## (For mouse, keyboard, and Synaptics touchpad support)
INPUT_DEVICES="keyboard mouse evdev synaptics"
VIDEO_CARDS="nvidia"
# VIDEO_CARDS="fbdev nv vesa nvidia"
# VIDEO_CARDS="nouveau"
LINGUAS="en"
# DISPLAYMANAGER="kdm"

GENTOO_MIRRORS="ftp://ftp.gtlib.gatech.edu/pub/gentoo ftp://ftp.ucsb.edu/pub/mi$

SYNC="rsync://rsync3.us.gentoo.org/gentoo-portage"





Code:
nvidia               9695709  31
drm                   164498  2 nvidia
i2c_core               13684  3 drm,nvidia,i2c_nforce2
minig ~ #



Code:
minig ~ # /etc/init.d/xdm start
 * Setting up xdm ...                                                     [ ok ]
minig ~ # /etc/init.d/xdm status
 * status: started
minig ~ # /etc/init.d/xdm status
 * status: crashed
minig ~ #




Code:

  GNU nano 2.3.2            File: /var/log/dmesg                      Modified

[   14.200658] ssb: Core 2 found: PCMCIA (cc 0x80D, rev 0x0A, vendor 0x4243)
[   14.200684] ssb: Core 3 found: PCI-E (cc 0x820, rev 0x09, vendor 0x4243)
[   14.205736] nvidia: module license 'NVIDIA' taints kernel.
[   14.205746] Disabling lock debugging due to kernel taint
[   14.345065] ssb: Sonics Silicon Backplane found on PCI device 0000:03:00.0
[   15.132169] microcode: CPU1 sig=0x106c2, pf=0x4, revision=0x212
[   15.784407] cfg80211: Calling CRDA to update world regulatory domain
[   15.807918] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet$
[   16.173853] b43-phy0: Broadcom 4312 WLAN found (core revision 15)
roadcom [   16.270133] b43-phy0: Found PHY: Analog 6, Type 5 (LP), Revision 1
[   16.330402] Broadcom 43xx driver loaded [ Features: PMNL ]
[   16.523552] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[   18.290774] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.$
[   18.291772] ACPI: PCI Interrupt Link [APCH] enabled at IRQ 21
[   18.291796] forcedeth 0000:00:0a.0: setting latency timer to 64
[   18.831028] forcedeth 0000:00:0a.0: ifname eth0, PHY OUI 0x732 @ 1, addr 00:$
[   18.831040] forcedeth 0000:00:0a.0: highdma csum pwrctl lnktim msi desc-v3
[   18.831924] ACPI: PCI Interrupt Link [APMU] enabled at IRQ 20
[   18.832007] pci 0000:00:10.0: setting latency timer to 64
[   18.831028] forcedeth 0000:00:0a.0: ifname eth0, PHY OUI 0x732 @ 1, addr 00:$
[   18.831040] forcedeth 0000:00:0a.0: highdma csum pwrctl lnktim msi desc-v3
[   18.831924] ACPI: PCI Interrupt Link [APMU] enabled at IRQ 20
[   18.832007] pci 0000:00:10.0: setting latency timer to 64
[   18.832656] ACPI: PCI Interrupt Link [AIGP] enabled at IRQ 23
[   18.832677] nvidia 0000:02:00.0: setting latency timer to 64
[   18.832685] vgaarb: device changed decodes: PCI:0000:02:00.0,olddecodes=io+m$
[   18.834106] [drm] Initialized nvidia-drm 0.0.0 20130102 for 0000:02:00.0 on $
[   18.835559] NVRM: loading NVIDIA UNIX x86 Kernel Module  334.21  Thu Feb 27 $
[   20.734048] EXT4-fs (sda5): re-mounted. Opts: (null)
[   21.056472] Adding 3145724k swap on /dev/sda8.  Priority:-1 extents:1 across$
[   21.181898] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts:$



Last edited by Phredus on Fri Jun 13, 2014 11:06 am; edited 2 times in total
Back to top
View user's profile Send private message
franzf
Advocate
Advocate


Joined: 29 Mar 2005
Posts: 4403

PostPosted: Thu Jun 12, 2014 8:45 am    Post subject: Reply with quote

Your current problem has nothing to do with kde/kdm. Your xdm-config says "xdm" for displaymanager. If you want to use kdm you have to replace the setting with "kdm".
Furthermore you have an own X-log at "/var/log/Xorg.0.log" which you should look at, and there should also be a kdm.log - can't tell you where that can be found.
Back to top
View user's profile Send private message
Phredus
n00b
n00b


Joined: 07 Feb 2013
Posts: 47

PostPosted: Thu Jun 12, 2014 11:31 am    Post subject: kde won't start, Thank you franzf, here are the results Reply with quote

I fixed entry in: File: /etc/conf.d/xdm. to read "kdm"
I did not find any issues in: File: /var/log/Xorg.0.log
I am running: /etc/init.d/xdm start to start kde.

the login applet "kdm_greet" appears after a couple of minutes, I log in with username and password (not root) then
All that happens in the screen is the nvidia logo appears for a couple of seconds, then appears again no error messages on the screen.

I deleted /.initrc Now this is what the error looks like:
minig ~ # less /var/log/kdm.log
Code:

Loading extension GLX
Loading extension NV-GLX
Loading extension NV-CONTROL
Loading extension XINERAMA
kdmgreet(3249) KdmPixmap::definePixmap: Cannot find wallpaper "Elarun"
klauncher(3255) kdemain: No DBUS session-bus found. Check if you have started th
e DBUS server.
kdeinit4: Communication error with launcher. Exiting!
kdmgreet(3249)/kdecore (K*TimeZone*): KSystemTimeZones: ktimezoned initialize()
D-Bus call failed:  "Not connected to D-Bus server"

kdmgreet(3249)/kdecore (K*TimeZone*): No time zone information obtained from kti
mezoned
(EE) Server terminated successfully (0). Closing log file.




File: /var/log/kdm.log
Code:

********************************************************************************
Note that your system uses syslog. All of kdm's internally generated messages
(i.e., not from libraries and external programs/scripts it uses) go to the
daemon.* syslog facility; check your syslog configuration to find out to which
file(s) it is logged. PAM logs messages related to authentication to authpriv.*.
********************************************************************************

Initializing built-in extension Generic Event Extension
Initializing built-in extension SHAPE
Initializing built-in extension MIT-SHM
Initializing built-in extension XInputExtension
Initializing built-in extension XTEST
Initializing built-in extension BIG-REQUESTS
Initializing built-in extension SYNC
Initializing built-in extension XKEYBOARD
Initializing built-in extension XC-MISC
Initializing built-in extension XINERAMA
Initializing built-in extension XFIXES
Initializing built-in extension RENDER
Initializing built-in extension RANDR
Initializing built-in extension COMPOSITE
Initializing built-in extension DAMAGE
Initializing built-in extension MIT-SCREEN-SAVER
Initializing built-in extension DOUBLE-BUFFER
Initializing built-in extension RECORD
Initializing built-in extension DPMS
Initializing built-in extension Present
Initializing built-in extension DRI3
Initializing built-in extension X-Resource
Initializing built-in extension XVideo
Initializing built-in extension XVideo-MotionCompensation
Initializing built-in extension XFree86-VidModeExtension
Initializing built-in extension XFree86-DGA
Initializing built-in extension XFree86-DRI
Initializing built-in extension DRI2
Loading extension GLX
Loading extension NV-GLX
Loading extension NV-CONTROL
Loading extension XINERAMA
kdmgreet(2981) KdmPixmap::definePixmap: Cannot find wallpaper "Elarun"
"KConfigIni: In file /.xinitrc, line 1: " Invalid entry (missing '=')
"KConfigIni: In file /.xinitrc, line 1: " Invalid entry (missing '=')
klauncher(2987) kdemain: No DBUS session-bus found. Check if you have started the DBUS server.
kdeinit4: Communication error with launcher. Exiting!
kdmgreet(2981)/kdecore (K*TimeZone*): KSystemTimeZones: ktimezoned initialize() D-Bus call failed:  "Not connected to D-Bus server"

kdmgreet(2981)/kdecore (K*TimeZone*): No time zone information obtained from ktimezoned
(EE) Server terminated successfully (0). Closing log file.
Initializing built-in extension Generic Event Extension
Initializing built-in extension SHAPE
Initializing built-in extension MIT-SHM
Initializing built-in extension XInputExtension
Initializing built-in extension XTEST
Initializing built-in extension BIG-REQUESTS
Initializing built-in extension SYNC
Initializing built-in extension XKEYBOARD
Initializing built-in extension XC-MISC
Initializing built-in extension XINERAMA
Initializing built-in extension XFIXES
Initializing built-in extension RENDER
Initializing built-in extension RANDR
Initializing built-in extension COMPOSITE
Initializing built-in extension DAMAGE
Initializing built-in extension MIT-SCREEN-SAVER
Initializing built-in extension DOUBLE-BUFFER
Initializing built-in extension RECORD
Initializing built-in extension DPMS
Initializing built-in extension Present
Initializing built-in extension DRI3
Initializing built-in extension X-Resource
Initializing built-in extension XVideo
Initializing built-in extension XVideo-MotionCompensation
Initializing built-in extension XFree86-VidModeExtension
Initializing built-in extension XFree86-DGA
Initializing built-in extension XFree86-DRI
Initializing built-in extension DRI2
Loading extension GLX
Loading extension NV-GLX
Loading extension NV-CONTROL
Loading extension XINERAMA
kdmgreet(3037) KdmPixmap::definePixmap: Cannot find wallpaper "Elarun"
"KConfigIni: In file /.xinitrc, line 1: " Invalid entry (missing '=')
"KConfigIni: In file /.xinitrc, line 1: " Invalid entry (missing '=')
klauncher(3043) kdemain: No DBUS session-bus found. Check if you have started the DBUS server.
kdeinit4: Communication error with launcher. Exiting!
kdmgreet(3037)/kdecore (K*TimeZone*): KSystemTimeZones: ktimezoned initialize() D-Bus call failed:  "Not connected to D-Bus server"

kdmgreet(3037)/kdecore (K*TimeZone*): No time zone information obtained from ktimezoned






Quote:
I have no idea why my stage 3 tarball is even mentioned here in File: /var/log/kdm.log

Code:
  GNU nano 2.3.2            File: /var/log/kdm.log

"KConfigIni: In file /stage3-i686-20131008.tar.bz2, line 398: " "Invalid escape$
"KConfigIni: In file /stage3-i686-20131008.tar.bz2, line 398: " "Invalid escape$
"KConfigIni: In file /stage3-i686-20131008.tar.bz2, line 399: " Invalid entry ($
"KConfigIni: In file /stage3-i686-20131008.tar.bz2, line 400: " Invalid entry ($
"KConfigIni: In file /stage3-i686-20131008.tar.bz2, line 401: " Invalid entry ($
"KConfigIni: In file /stage3-i686-20131008.tar.bz2, line 402: " Invalid entry ($
"KConfigIni: In file /stage3-i686-20131008.tar.bz2, line 403: " "Invalid escape$
"KConfigIni: In file /stage3-i686-20131008.tar.bz2, line 403: " "Invalid escape$
"KConfigIni: In file /stage3-i686-20131008.tar.bz2, line 403: " "Invalid escape$
"KConfigIni: In file /stage3-i686-20131008.tar.bz2, line 403: " "Invalid escape$
"KConfigIni: In file /stage3-i686-20131008.tar.bz2, line 403: " "Invalid escape$
"KConfigIni: In file /stage3-i686-20131008.tar.bz2, line 403: " "Invalid escape$
"KConfigIni: In file /stage3-i686-20131008.tar.bz2, line 403: " "Invalid escape$
"KConfigIni: In file /stage3-i686-20131008.tar.bz2, line 405: " "Invalid escape$
"KConfigIni: In file /stage3-i686-20131008.tar.bz2, line 406: " Invalid entry ($
"KConfigIni: In file /stage3-i686-20131008.tar.bz2, line 407: " "Invalid escape$
"KConfigIni: In file /stage3-i686-20131008.tar.bz2, line 407: " "Invalid escape$
"KConfigIni: In file /stage3-i686-20131008.tar.bz2, line 408: " Invalid entry ($




Code:
  GNU nano 2.3.2            File: /etc/conf.d/xdm

# We always try and start X on a static VT. The various DMs normally default
# to using VT7. If you wish to use the xdm init script, then you should ensure
# that the VT checked is the same VT your DM wants to use. We do this check to
# ensure that you haven't accidentally configured something to run on the VT
# in your /etc/inittab file so that you don't get a dead keyboard.
CHECKVT=7

# What display manager do you use ?  [ xdm | gdm | kdm | gpe | entrance ]
# NOTE: If this is set in /etc/rc.conf, that setting will override this one.
DISPLAYMANAGER="kdm"
Back to top
View user's profile Send private message
chithanh
Developer
Developer


Joined: 05 Aug 2006
Posts: 2152
Location: Berlin, Germany

PostPosted: Fri Jun 13, 2014 11:42 am    Post subject: Reply with quote

Did you check that dbus is started?
Code:
# /etc/init.d/dbus status
Back to top
View user's profile Send private message
Phredus
n00b
n00b


Joined: 07 Feb 2013
Posts: 47

PostPosted: Fri Jun 13, 2014 12:00 pm    Post subject: Thank you for the response chithanh Reply with quote

Yes. It is running. Here is the output for that, I am at my wits end!!! Thanks for the help
Quote:
minig ~ # /etc/init.d/dbus status
* status: started
minig ~ #
Back to top
View user's profile Send private message
chithanh
Developer
Developer


Joined: 05 Aug 2006
Posts: 2152
Location: Berlin, Germany

PostPosted: Fri Jun 13, 2014 12:08 pm    Post subject: Reply with quote

Code:
 "KConfigIni: In file /.xinitrc, line 1: " Invalid entry (missing '=')
That looks strange, what is in that file?
Back to top
View user's profile Send private message
Phredus
n00b
n00b


Joined: 07 Feb 2013
Posts: 47

PostPosted: Fri Jun 13, 2014 12:41 pm    Post subject: Contents of /.xinitrc Reply with quote

I deleted this file earlier shich gave the error:
Code:

"KConfigIni: In file /.xinitrc, line 1: " Invalid entry (missing '=')


I have replace the file and added the line below:
Code:

minig ~ # cat /.xinitrc
exec ck-launch-session startkde


Now the error is gone, but still no success in starting kde. Please see errors below:
Code:

Loading extension GLX
Loading extension NV-GLX
Loading extension NV-CONTROL
Loading extension XINERAMA
kdmgreet(2991) KdmPixmap::definePixmap: Cannot find wallpaper "Elarun"
klauncher(2997) kdemain: No DBUS session-bus found. Check if you have started th
e DBUS server.
kdeinit4: Communication error with launcher. Exiting!
kdmgreet(2991)/kdecore (K*TimeZone*): KSystemTimeZones: ktimezoned initialize()
D-Bus call failed:  "Not connected to D-Bus server"

kdmgreet(2991)/kdecore (K*TimeZone*): No time zone information obtained from kti
mezoned
setversion 1.4 failed: Permission denied
(EE) Server terminated successfully (0). Closing log file.
Initializing built-in extension Generic Event Extension
Initializing built-in extension SHAPE
Initializing built-in extension MIT-SHM
Initializing built-in extension XInputExtension

Back to top
View user's profile Send private message
Phredus
n00b
n00b


Joined: 07 Feb 2013
Posts: 47

PostPosted: Fri Jun 13, 2014 10:40 pm    Post subject: Solved, Thank you very much guys. Reply with quote

All the fixes that were suggested were needed and helped but the last thing i tried was looking for "startkde".
I noticed startkde was missing from the system. I don't know if I missed it or somehow it was removed.
I emerged kdebase-startkde.
I now have a beautiful "kdegreet" :lol: login screen followed by a beautiful kde fully operational desktop.
the logs are clear of any errors other than minor warnings.
YOU GUYS ARE TERRIFIC. ESPECIALLY: russK, VinzC, franzf and especially chithanh.
THANK YOU FOR ALL THE HELP DURING THIS MADNESS.
Code:
  # emerge kdebase-startkde

All fixed and happy now!!!!!! :lol: :lol: :lol: "I Love Gentoo"
Back to top
View user's profile Send private message
m1k0
Apprentice
Apprentice


Joined: 27 Dec 2006
Posts: 180
Location: Radom/Poland

PostPosted: Sat Jan 17, 2015 2:28 pm    Post subject: Reply with quote

@Phredus, big thanks :)
_________________
MSI GX-70
Back to top
View user's profile Send private message
Display posts from previous:   
Reply to topic    Gentoo Forums Forum Index Desktop Environments All times are GMT
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum