Gentoo Forums
Gentoo Forums
Gentoo Forums
Quick Search: in
Fail to load X Server with nvidia drivers. GeForce 9400M
View unanswered posts
View posts from last 24 hours

 
Reply to topic    Gentoo Forums Forum Index Desktop Environments
View previous topic :: View next topic  
Author Message
Phredus
n00b
n00b


Joined: 07 Feb 2013
Posts: 47

PostPosted: Tue Jun 10, 2014 11:11 am    Post subject: Fail to load X Server with nvidia drivers. GeForce 9400M Reply with quote

Please see further outputs on this unresolved issue at this post. thank you so much


https://forums.gentoo.org/viewtopic-t-993058-highlight-.html



Quote:

Other than this current issue the system seems to be running perfectly.
portage synced and emerge update ran without any errors.
Thank you so much for your help.

X will not start.
after "startx" command the nvidia logo flashes then the x server shuts down.


Code:

Initializing built-in extension XFree86-VidModeExtension
Initializing built-in extension XFree86-DGA
Initializing built-in extension XFree86-DRI
Initializing built-in extension DRI2
Loading extension GLX
Loading extension NV-GLX
Loading extension NV-CONTROL
Loading extension XINERAMA
/etc/X11/xinit/xinitrc: line 61: xterm: command not found
/etc/X11/xinit/xinitrc: line 63: exec: xterm: not found
/etc/X11/xinit/xinitrc: line 59: twm: command not found
xinit: connection to X server lost

waiting for X server to shut down ..(EE) Server terminated successfully (0). Closing log file.


Code:


minig log # dmesg
[    1.630232] system 00:00: [io  0x1400-0x147f] has been reserved
[    1.630245] system 00:00: [io  0x1480-0x14ff] has been reserved
[    1.630257] system 00:00: [io  0x0400-0x047f] has been reserved
[    1.630269] system 00:00: [io  0x0480-0x04ff] has been reserved
[    1.630281] system 00:00: [io  0x0500-0x057f] has been reserved
[    1.630292] system 00:00: [io  0x0580-0x05ff] has been reserved
[    1.630304] system 00:00: [io  0x0800-0x087f] has been reserved
[    1.630316] system 00:00: [io  0x0880-0x08ff] has been reserved
[    1.630331] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[    1.630906] pnp 00:01: Plug and Play ACPI device, IDs PNP0103 (active)
[    1.630942] pnp 00:02: [dma 4]
[    1.631005] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
[    1.631101] pnp 00:03: Plug and Play ACPI device, IDs PNP0c04 (active)
[    1.631244] pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
[    1.631326] pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active)
[    1.631438] pnp 00:06: Plug and Play ACPI device, IDs PNP0303 (active)
[    1.631548] pnp 00:07: Plug and Play ACPI device, IDs AUI1101 PNP0f13 (active)
[    1.631682] system 00:08: [mem 0x00000000-0x0009ffff] could not be reserved
[    1.631699] system 00:08: [mem 0x000ec000-0x000fffff] could not be reserved
[    1.631713] system 00:08: [mem 0xf8000000-0xf9ffffff] has been reserved
[    1.631726] system 00:08: [mem 0xfec00000-0xfec00fff] could not be reserved
[    1.631739] system 00:08: [mem 0xfee00000-0xfee00fff] has been reserved
[    1.631753] system 00:08: Plug and Play ACPI device, IDs PNP0c01 (active)
[    1.636473] pnp: PnP ACPI: found 9 devices
[    1.636483] ACPI: bus type PNP unregistered
[    1.671083] pci 0000:02:00.0: no compatible bridge window for [mem 0xfffe0000-0xffffffff pref]
[    1.671159] pci 0000:00:09.0: PCI bridge to [bus 01]
[    1.671184] pci 0000:02:00.0: BAR 6: can't assign mem pref (size 0x20000)
[    1.671197] pci 0000:00:10.0: PCI bridge to [bus 02]
[    1.671208] pci 0000:00:10.0:   bridge window [io  0x2000-0x2fff]
[    1.671222] pci 0000:00:10.0:   bridge window [mem 0xd2000000-0xd2ffffff]
[    1.671236] pci 0000:00:10.0:   bridge window [mem 0xc0000000-0xd1ffffff 64bit pref]
[    1.671252] pci 0000:00:15.0: PCI bridge to [bus 03]
[    1.671272] pci 0000:00:15.0:   bridge window [mem 0xd3000000-0xd30fffff]
[    1.671301] pci 0000:00:16.0: PCI bridge to [bus 04]
[    1.671340] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
[    1.671345] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
[    1.671351] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[    1.671356] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff]
[    1.671361] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff]
[    1.671367] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff]
[    1.671372] pci_bus 0000:00: resource 10 [mem 0x000d0000-0x000d3fff]
[    1.671378] pci_bus 0000:00: resource 11 [mem 0x000d4000-0x000d7fff]
[    1.671383] pci_bus 0000:00: resource 12 [mem 0x000d8000-0x000dbfff]
[    1.671388] pci_bus 0000:00: resource 13 [mem 0x000dc000-0x000dffff]
[    1.671394] pci_bus 0000:00: resource 14 [mem 0x000e0000-0x000e3fff]
[    1.671399] pci_bus 0000:00: resource 15 [mem 0x000e4000-0x000e7fff]
[    1.671404] pci_bus 0000:00: resource 16 [mem 0x000e8000-0x000ebfff]
[    1.671410] pci_bus 0000:00: resource 17 [mem 0x000ec000-0x000effff]
[    1.671415] pci_bus 0000:00: resource 18 [mem 0xc0000000-0xf7ffffff]
[    1.671421] pci_bus 0000:00: resource 19 [mem 0xfa000000-0xfebfffff]
[    1.671426] pci_bus 0000:00: resource 20 [mem 0xfff00000-0xffffffff]
[    1.671433] pci_bus 0000:01: resource 4 [io  0x0000-0x0cf7]
[    1.671438] pci_bus 0000:01: resource 5 [io  0x0d00-0xffff]
[    1.671443] pci_bus 0000:01: resource 6 [mem 0x000a0000-0x000bffff]
[    1.671449] pci_bus 0000:01: resource 7 [mem 0x000c0000-0x000c3fff]
[    1.671454] pci_bus 0000:01: resource 8 [mem 0x000c4000-0x000c7fff]
[    1.671459] pci_bus 0000:01: resource 9 [mem 0x000c8000-0x000cbfff]
[    1.671465] pci_bus 0000:01: resource 10 [mem 0x000d0000-0x000d3fff]
[    1.671470] pci_bus 0000:01: resource 11 [mem 0x000d4000-0x000d7fff]
[    1.671476] pci_bus 0000:01: resource 12 [mem 0x000d8000-0x000dbfff]
[    1.671481] pci_bus 0000:01: resource 13 [mem 0x000dc000-0x000dffff]
[    1.671487] pci_bus 0000:01: resource 14 [mem 0x000e0000-0x000e3fff]
[    1.671492] pci_bus 0000:01: resource 15 [mem 0x000e4000-0x000e7fff]
[    1.671497] pci_bus 0000:01: resource 16 [mem 0x000e8000-0x000ebfff]
[    1.671503] pci_bus 0000:01: resource 17 [mem 0x000ec000-0x000effff]
[    1.671508] pci_bus 0000:01: resource 18 [mem 0xc0000000-0xf7ffffff]
[    1.671514] pci_bus 0000:01: resource 19 [mem 0xfa000000-0xfebfffff]
[    1.671520] pci_bus 0000:01: resource 20 [mem 0xfff00000-0xffffffff]
[    1.671525] pci_bus 0000:02: resource 0 [io  0x2000-0x2fff]
[    1.671531] pci_bus 0000:02: resource 1 [mem 0xd2000000-0xd2ffffff]
[    1.671536] pci_bus 0000:02: resource 2 [mem 0xc0000000-0xd1ffffff 64bit pref]
[    1.671542] pci_bus 0000:03: resource 1 [mem 0xd3000000-0xd30fffff]
[    1.671635] NET: Registered protocol family 2
[    1.672021] TCP established hash table entries: 8192 (order: 4, 65536 bytes)
[    1.672091] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[    1.672154] TCP: Hash tables configured (established 8192 bind 8192)
[    1.672250] TCP: reno registered
[    1.672261] UDP hash table entries: 512 (order: 2, 16384 bytes)
[    1.672284] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[    1.672454] NET: Registered protocol family 1
[    1.673256] ACPI: PCI Interrupt Link [AUBA] enabled at IRQ 23
[    1.760988] ACPI: PCI Interrupt Link [AUBB] enabled at IRQ 22
[    1.781009] ACPI: PCI Interrupt Link [AUBC] enabled at IRQ 21
[    1.860979] ACPI: PCI Interrupt Link [AUBD] enabled at IRQ 20
[    1.880462] pci 0000:02:00.0: Boot video device
[    1.880511] PCI: CLS 64 bytes, default 64
[    1.880626] Trying to unpack rootfs image as initramfs...
[    3.058326] Freeing initrd memory: 3676K (f7467000 - f77fe000)
[    3.058617] apm: BIOS not found.
[    3.059294] audit: initializing netlink socket (disabled)
[    3.059326] type=2000 audit(1402335724.050:1): initialized
[    3.099038] bounce pool size: 64 pages
[    3.099058] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[    3.099237] VFS: Disk quotas dquot_6.5.2
[    3.099302] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    3.099545] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    3.099682] msgmni has been set to 1712
[    3.100179] async_tx: api initialized (async)
[    3.100242] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[    3.100255] io scheduler noop registered
[    3.100262] io scheduler deadline registered
[    3.100285] io scheduler cfq registered (default)
[    3.105265] ACPI: PCI Interrupt Link [AX3A] enabled at IRQ 16
[    3.106013] ACPI: PCI Interrupt Link [AX4A] enabled at IRQ 16
[    3.106319] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    3.107731] vesafb: mode is 1280x720x32, linelength=5120, pages=0
[    3.107744] vesafb: scrolling: redraw
[    3.107753] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[    3.108872] vesafb: framebuffer at 0xd1000000, mapped to 0xf8080000, using 3648k, total 3648k
[    3.158311] Console: switching to colour frame buffer device 160x45
[    3.203544] fb0: VESA VGA frame buffer device
[    3.203857] isapnp: Scanning for PnP cards...
[    3.516048] isapnp: No Plug & Play device found
[    3.516314] ioatdma: Intel(R) QuickData Technology Driver 4.00
[    3.520097] brd: module loaded
[    3.521986] loop: module loaded
[    3.522153] Loading iSCSI transport class v2.0-870.
[    3.522655] iscsi: registered transport (tcp)
[    3.524686] scsi0 : pata_legacy
[    3.524953] ata1: PATA max PIO4 cmd 0x1f0 ctl 0x3f6 irq 14
[    3.680717] scsi1 : pata_legacy
[    3.680959] ata2: PATA max PIO4 cmd 0x170 ctl 0x376 irq 15
[    3.840511] i8042: PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[    3.858398] serio: i8042 KBD port at 0x60,0x64 irq 1
[    3.858708] serio: i8042 AUX port at 0x60,0x64 irq 12
[    3.871730] mousedev: PS/2 mouse device common for all mice
[    3.884756] md: raid0 personality registered for level 0
[    3.897600] md: raid1 personality registered for level 1
[    3.900494] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[    3.924014] md: raid6 personality registered for level 6
[    3.937335] md: raid5 personality registered for level 5
[    3.950378] md: raid4 personality registered for level 4
[    3.962991] hidraw: raw HID events driver (C) Jiri Kosina
[    3.976025] TCP: cubic registered
[    3.988403] NET: Registered protocol family 17
[    4.000939] Using IPI No-Shortcut mode
[    4.013638] registered taskstats version 1
[    4.026303] drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
[    4.039030] Freeing unused kernel memory: 496K (c0621000 - c069d000)
[    4.050037] tsc: Refined TSC clocksource calibration: 1599.992 MHz
[    5.050145] Switched to clocksource tsc
[    5.338299] ahci 0000:00:0b.0: version 3.0
[    5.339024] ACPI: PCI Interrupt Link [APSI] enabled at IRQ 23
[    5.339116] ahci 0000:00:0b.0: irq 40 for MSI/MSI-X
[    5.339142] ahci 0000:00:0b.0: controller can't do PMP, turning off CAP_PMP
[    5.339306] ahci 0000:00:0b.0: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x1 impl SATA mode
[    5.339314] ahci 0000:00:0b.0: flags: 64bit ncq sntf led pio slum part
[    5.339321] ahci 0000:00:0b.0: setting latency timer to 64
[    5.346610] scsi2 : ahci
[    5.348562] scsi3 : ahci
[    5.349165] scsi4 : ahci
[    5.349938] scsi5 : ahci
[    5.350690] scsi6 : ahci
[    5.351431] scsi7 : ahci
[    5.352934] ata3: SATA max UDMA/133 abar m8192@0xd3104000 port 0xd3104100 irq 40
[    5.352942] ata4: DUMMY
[    5.352946] ata5: DUMMY
[    5.352949] ata6: DUMMY
[    5.352953] ata7: DUMMY
[    5.352957] ata8: DUMMY
[    5.517930] input: PS/2 Mouse as /devices/platform/i8042/serio1/input/input3
[    5.542458] input: AlpsPS/2 ALPS GlidePoint as /devices/platform/i8042/serio1/input/input2
[    5.700052] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    5.700988] ata3.00: ATA-8: Hitachi HTS542525K9SA00, BBFOC31P, max UDMA/133
[    5.700994] ata3.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 31/32)
[    5.702095] ata3.00: configured for UDMA/133
[    5.702340] scsi 2:0:0:0: Direct-Access     ATA      Hitachi HTS54252 BBFO PQ: 0 ANSI: 5
[    5.703389] sd 2:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB)
[    5.703613] sd 2:0:0:0: [sda] Write Protect is off
[    5.703624] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    5.703768] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    5.808057]  sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 sda8 sda9 >
[    5.812303] sd 2:0:0:0: [sda] Attached SCSI disk
[    5.915128] sd 2:0:0:0: Attached scsi generic sg0 type 0
[    6.015428] NCR53c406a: no available ports found
[    6.204678] scsi: <fdomain> Detection failed (no card)
[    6.245283] GDT-HA: Storage RAID Controller Driver. Version: 3.05
[    6.377314] qlogicfas: no cards were found, please specify I/O address and IRQ using iobase= and irq= optionsFailed initialization of WD-7000 SCSI card!
[    6.718060] imm: Version 2.05 (for Linux 2.4.0)
[    6.825245] sym53c416.c: Version 1.0.0-ac
[    6.867768] Fusion MPT base driver 3.04.20
[    6.867773] Copyright (c) 1999-2008 LSI Corporation
[    6.880562] Fusion MPT SPI Host driver 3.04.20
[    6.891368] Fusion MPT FC Host driver 3.04.20
[    6.902015] Fusion MPT SAS Host driver 3.04.20
[    6.922529] 3ware Storage Controller device driver for Linux v1.26.02.003.
[    6.928640] 3ware 9000 Storage Controller device driver for Linux v2.26.02.014.
[    6.934785] Compaq SMART2 Driver (v 2.6.0)
[    6.986105] HP CISS Driver (v 3.6.26)
[    7.030750] Adaptec aacraid driver 1.2-0[30200]-ms
[    7.042257] megaraid cmm: 2.20.2.7 (Release Date: Sun Jul 16 00:01:03 EST 2006)
[    7.043506] megaraid: 2.20.5.1 (Release Date: Thu Nov 16 15:32:35 EST 2006)
[    7.054877] megasas: 06.700.06.00-rc1 Sat. Aug. 31 17:00:00 PDT 2013
[    7.065391] qla2xxx [0000:00:00.0]-0005: : QLogic Fibre Channel HBA Driver: 8.06.00.08-k.
[    7.120749] Emulex LightPulse Fibre Channel SCSI driver 8.3.42
[    7.120755] Copyright(c) 2004-2013 Emulex.  All rights reserved.
[    7.134247] aic94xx: Adaptec aic94xx SAS/SATA driver version 1.0.3 loaded
[    7.189309] ACPI: bus type USB registered
[    7.189836] usbcore: registered new interface driver usbfs
[    7.190140] usbcore: registered new interface driver hub
[    7.190762] usbcore: registered new device driver usb
[    7.192219] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    7.192876] ehci-pci: EHCI PCI platform driver
[    7.193482] ehci-pci 0000:00:04.1: setting latency timer to 64
[    7.193505] ehci-pci 0000:00:04.1: EHCI Host Controller
[    7.193525] ehci-pci 0000:00:04.1: new USB bus registered, assigned bus number 1
[    7.193543] ehci-pci 0000:00:04.1: debug port 1
[    7.193577] ehci-pci 0000:00:04.1: cache line size of 64 is not supported
[    7.193637] ehci-pci 0000:00:04.1: irq 22, io mem 0xd3109200
[    7.210092] ehci-pci 0000:00:04.1: USB 2.0 started, EHCI 1.00
[    7.210278] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    7.210285] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    7.210290] usb usb1: Product: EHCI Host Controller
[    7.210294] usb usb1: Manufacturer: Linux 3.12.21-gentoo-r1 ehci_hcd
[    7.210299] usb usb1: SerialNumber: 0000:00:04.1
[    7.211050] hub 1-0:1.0: USB hub found
[    7.211093] hub 1-0:1.0: 5 ports detected
[    7.212315] ehci-pci 0000:00:06.1: setting latency timer to 64
[    7.212343] ehci-pci 0000:00:06.1: EHCI Host Controller
[    7.212373] ehci-pci 0000:00:06.1: new USB bus registered, assigned bus number 2
[    7.212391] ehci-pci 0000:00:06.1: debug port 1
[    7.212428] ehci-pci 0000:00:06.1: cache line size of 64 is not supported
[    7.212473] ehci-pci 0000:00:06.1: irq 20, io mem 0xd3109100
[    7.230064] ehci-pci 0000:00:06.1: USB 2.0 started, EHCI 1.00
[    7.230232] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[    7.230239] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    7.230244] usb usb2: Product: EHCI Host Controller
[    7.230249] usb usb2: Manufacturer: Linux 3.12.21-gentoo-r1 ehci_hcd
[    7.230253] usb usb2: SerialNumber: 0000:00:06.1
[    7.231028] hub 2-0:1.0: USB hub found
[    7.231071] hub 2-0:1.0: 3 ports detected
[    7.319159] usbcore: registered new interface driver usb-storage
[    7.325658] uhci_hcd: USB Universal Host Controller Interface driver
[    7.332536] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    7.372778] usbcore: registered new interface driver usbhid
[    7.372783] usbhid: USB HID core driver
[    7.750069] usb 2-1: new high-speed USB device number 2 using ehci-pci
[    7.901389] usb 2-1: New USB device found, idVendor=13fd, idProduct=0841
[    7.901399] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    7.901406] usb 2-1: Product: USB Mass Storage Device
[    7.901413] usb 2-1: Manufacturer: TSSTcorp
[    7.901419] usb 2-1: SerialNumber: SATASLIM000000762f3
[    7.902761] usb-storage 2-1:1.0: USB Mass Storage device detected
[    7.906741] scsi10 : usb-storage 2-1:1.0
[    7.907224] device-mapper: uevent: version 1.0.3
[    7.908099] device-mapper: ioctl: 4.26.0-ioctl (2013-08-15) initialised: dm-devel@redhat.com
[    8.020079] usb 2-2: new high-speed USB device number 3 using ehci-pci
[    8.143961] md: raid10 personality registered for level 10
[    8.150232] md: linear personality registered for level -1
[    8.156641] md: multipath personality registered for level -4
[    8.173135] usb 2-2: New USB device found, idVendor=090c, idProduct=637b
[    8.173141] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    8.173146] usb 2-2: Product: HP Webcam-50
[    8.173150] usb 2-2: Manufacturer: Image Processor
[    8.299351] JFS: nTxBlock = 8192, nTxLock = 65536
[    8.318101] RPC: Registered named UNIX socket transport module.
[    8.318106] RPC: Registered udp transport module.
[    8.318109] RPC: Registered tcp transport module.
[    8.318111] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    8.347166] SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled
[    8.379354] fuse init (API version 7.22)
[    8.405364] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI
[    8.405371] e1000: Copyright (c) 1999-2006 Intel Corporation.
[    8.415447] pps_core: LinuxPPS API ver. 1 registered
[    8.415454] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    8.416731] PTP clock support registered
[    8.902177] scsi 10:0:0:0: CD-ROM            TSSTcorp CDDVDW SE-S084B  TS00 PQ: 0 ANSI: 0
[    8.910649] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[    8.910655] cdrom: Uniform CD-ROM driver Revision: 3.20
[    8.911325] sr 10:0:0:0: Attached scsi CD-ROM sr0
[    8.912602] sr 10:0:0:0: Attached scsi generic sg1 type 5
[    9.078802] EXT3-fs (sda5): error: couldn't mount because of unsupported optional features (240)
[    9.079130] EXT2-fs (sda5): error: couldn't mount because of unsupported optional features (240)
[    9.093164] UDF-fs: warning (device sda5): udf_fill_super: No partition found (2)
[    9.132119] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
[   12.231749] systemd-udevd[1838]: starting version 212
[   13.063080] ACPI: Requesting acpi_cpufreq
[   13.131755] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input4
[   13.133335] ACPI: Lid Switch [LID0]
[   13.133567] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input5
[   13.133711] ACPI: Sleep Button [SLPB]
[   13.133922] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input6
[   13.134043] ACPI: Power Button [PWRB]
[   13.134359] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input7
[   13.134502] ACPI: Power Button [PWRF]
[   13.136504] ohci-pci: OHCI PCI platform driver
[   13.137100] ohci-pci 0000:00:04.0: setting latency timer to 64
[   13.137111] ohci-pci 0000:00:04.0: OHCI PCI host controller
[   13.137135] ohci-pci 0000:00:04.0: new USB bus registered, assigned bus number 3
[   13.137222] ohci-pci 0000:00:04.0: irq 23, io mem 0xd3108000
[   13.192231] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[   13.192243] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[   13.192250] usb usb3: Product: OHCI PCI host controller
[   13.192258] usb usb3: Manufacturer: Linux 3.12.21-gentoo-r1 ohci_hcd
[   13.192265] usb usb3: SerialNumber: 0000:00:04.0
[   13.192880] hub 3-0:1.0: USB hub found
[   13.192913] hub 3-0:1.0: 5 ports detected
[   13.195143] ohci-pci 0000:00:06.0: setting latency timer to 64
[   13.195155] ohci-pci 0000:00:06.0: OHCI PCI host controller
[   13.195177] ohci-pci 0000:00:06.0: new USB bus registered, assigned bus number 4
[   13.195265] ohci-pci 0000:00:06.0: irq 21, io mem 0xd3107000
[   13.199319] ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[   13.199929] ACPI: AC Adapter [ACAD] (on-line)
[   13.238392] tsc: Marking TSC unstable due to TSC halts in idle
[   13.238421] ACPI: acpi_idle registered with cpuidle
[   13.244699] Switched to clocksource hpet
[   13.252226] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[   13.252236] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[   13.252244] usb usb4: Product: OHCI PCI host controller
[   13.252250] usb usb4: Manufacturer: Linux 3.12.21-gentoo-r1 ohci_hcd
[   13.252257] usb usb4: SerialNumber: 0000:00:06.0
[   13.252687] hub 4-0:1.0: USB hub found
[   13.252720] hub 4-0:1.0: 3 ports detected
[   13.255888] i2c i2c-0: nForce2 SMBus adapter at 0x3040
[   13.256105] i2c i2c-1: nForce2 SMBus adapter at 0x3000
[   13.271940] Linux agpgart interface v0.103
[   13.312928] rtc_cmos 00:04: RTC can wake from S4
[   13.315523] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
[   13.315626] rtc_cmos 00:04: alarms up to one year, y3k, 114 bytes nvram, hpet irqs
[   13.323393] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[   13.323446] ACPI: Battery Slot [BAT0] (battery present)
[   13.368742] [drm] Initialized drm 1.1.0 20060810
[   13.435699] acpi device:2f: registered as cooling_device2
[   13.436289] ACPI: Video Device [IGPU] (multi-head: yes  rom: no  post: no)
[   13.436721] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:2e/LNXVIDEO:00/input/input8
[   13.580142] usb 3-1: new low-speed USB device number 2 using ohci-pci
[   13.587621] [Firmware Bug]: Invalid critical threshold (0)
[   13.591925] thermal LNXTHERM:00: registered as thermal_zone0
[   13.591940] ACPI: Thermal Zone [TZ0] (59 C)
[   13.658819] input: PC Speaker as /devices/platform/pcspkr/input/input9
[   13.783915] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64.
[   13.784943] ACPI: PCI Interrupt Link [APCH] enabled at IRQ 22
[   13.784970] forcedeth 0000:00:0a.0: setting latency timer to 64
[   13.808102] usb 3-1: New USB device found, idVendor=046d, idProduct=c001
[   13.808113] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[   13.808120] usb 3-1: Product: N48
[   13.808126] usb 3-1: Manufacturer: Logitech
[   13.819532] input: Logitech N48 as /devices/pci0000:00/0000:00:04.0/usb3/3-1/3-1:1.0/input/input10
[   13.819898] hid-generic 0003:046D:C001.0001: input,hidraw0: USB HID v1.00 Mouse [Logitech N48] on usb-0000:00:04.0-1/input0
[   13.830185] ssb: Found chip with id 0x4312, rev 0x01 and package 0x00
[   13.830205] ssb: Core 0 found: ChipCommon (cc 0x800, rev 0x16, vendor 0x4243)
[   13.830220] ssb: Core 1 found: IEEE 802.11 (cc 0x812, rev 0x0F, vendor 0x4243)
[   13.830236] ssb: Core 2 found: PCMCIA (cc 0x80D, rev 0x0A, vendor 0x4243)
[   13.830252] ssb: Core 3 found: PCI-E (cc 0x820, rev 0x09, vendor 0x4243)
[   13.868457] microcode: CPU0 sig=0x106c2, pf=0x4, revision=0x212
[   13.950279] ssb: Sonics Silicon Backplane found on PCI device 0000:03:00.0
[   14.058120] microcode: CPU1 sig=0x106c2, pf=0x4, revision=0x212
[   14.062721] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[   14.311132] forcedeth 0000:00:0a.0: ifname eth0, PHY OUI 0x732 @ 1, addr 00:26:9e:8b:cc:03
[   14.311140] forcedeth 0000:00:0a.0: highdma csum pwrctl lnktim msi desc-v3
[   14.448373] cfg80211: Calling CRDA to update world regulatory domain
[   14.693029] b43-phy0: Broadcom 4312 WLAN found (core revision 15)
[   14.790091] b43-phy0: Found PHY: Analog 6, Type 5 (LP), Revision 1
[   14.850399] Broadcom 43xx driver loaded [ Features: PMNL ]
[   15.529521] ACPI: PCI Interrupt Link [AAZA] enabled at IRQ 21
[   15.529538] hda_intel: Disabling MSI
[   15.529589] snd_hda_intel 0000:00:08.0: setting latency timer to 64
[   15.565170] b43-phy0 ERROR: Firmware file "b43/ucode15.fw" not found
[   15.565177] b43-phy0 ERROR: Firmware file "b43-open/ucode15.fw" not found
[   15.565183] b43-phy0 ERROR: You must go to http://wireless.kernel.org/en/users/Drivers/b43#devicefirmware and download the correct firmware for this driver version. Please carefully read all instructions on this website.
[   16.636337] nvidia: module license 'NVIDIA' taints kernel.
[   16.636343] nvidia: module license 'NVIDIA' taints kernel.
[   16.636347] Disabling lock debugging due to kernel taint
[   19.371628] ACPI: PCI Interrupt Link [APMU] enabled at IRQ 20
[   19.371714] pci 0000:00:10.0: setting latency timer to 64
[   19.372364] ACPI: PCI Interrupt Link [AIGP] enabled at IRQ 23
[   19.372386] nvidia 0000:02:00.0: setting latency timer to 64
[   19.372394] vgaarb: device changed decodes: PCI:0000:02:00.0,olddecodes=io+mem,decodes=none:owns=none
[   19.373205] [drm] Initialized nvidia-drm 0.0.0 20130102 for 0000:02:00.0 on minor 0
[   14.520422] systemd-udevd[1857]: renamed network interface eth0 to enp0s10
[   19.374269] NVRM: loading NVIDIA UNIX x86 Kernel Module  334.21  Thu Feb 27 15:04:33 PST 2014

[   20.909047] EXT4-fs (sda5): re-mounted. Opts: (null)
[   21.253654] Adding 3145724k swap on /dev/sda8.  Priority:-1 extents:1 across:3145724k
[   21.379003] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null)
[   33.739936] NET: Registered protocol family 10
[   60.293525] nvidia 0000:02:00.0: irq 41 for MSI/MSI-X
[   61.143009] NVRM: Your system is not currently configured to drive a VGA console
[   61.143020] NVRM: on the primary VGA device. The NVIDIA Linux graphics driver
[   61.143027] NVRM: requires the use of a text-mode VGA console. Use of other console
[   61.143033] NVRM: drivers including, but not limited to, vesafb, may result in
[   61.143038] NVRM: corruption and stability problems, and is not supported.
[  353.900280] nvidia 0000:02:00.0: irq 41 for MSI/MSI-X
[20164.646218] nvidia 0000:02:00.0: irq 41 for MSI/MSI-X
[20181.486583] nvidia 0000:02:00.0: irq 41 for MSI/MSI-X
[20229.616247] nvidia 0000:02:00.0: irq 41 for MSI/MSI-X
[21026.108759] nvidia 0000:02:00.0: irq 41 for MSI/MSI-X
[23120.814811] nvidia 0000:02:00.0: irq 41 for MSI/MSI-X
[32439.800334] nvidia 0000:02:00.0: irq 41 for MSI/MSI-X
[33792.174582] nvidia 0000:02:00.0: irq 41 for MSI/MSI-X
minig log # dmesg





Code:


minig ~ # lspci
00:00.0 Host bridge: NVIDIA Corporation MCP79 Host Bridge (rev b1)
00:00.1 RAM memory: NVIDIA Corporation MCP79 Memory Controller (rev b1)
00:03.0 ISA bridge: NVIDIA Corporation MCP79 LPC Bridge (rev b3)
00:03.1 RAM memory: NVIDIA Corporation MCP79 Memory Controller (rev b1)
00:03.2 SMBus: NVIDIA Corporation MCP79 SMBus (rev b1)
00:03.3 RAM memory: NVIDIA Corporation MCP79 Memory Controller (rev b1)
00:03.5 Co-processor: NVIDIA Corporation MCP79 Co-processor (rev b1)
00:04.0 USB controller: NVIDIA Corporation MCP79 OHCI USB 1.1 Controller (rev b1)
00:04.1 USB controller: NVIDIA Corporation MCP79 EHCI USB 2.0 Controller (rev b1)
00:06.0 USB controller: NVIDIA Corporation MCP79 OHCI USB 1.1 Controller (rev b1)
00:06.1 USB controller: NVIDIA Corporation MCP79 EHCI USB 2.0 Controller (rev b1)
00:08.0 Audio device: NVIDIA Corporation MCP79 High Definition Audio (rev b1)
00:09.0 PCI bridge: NVIDIA Corporation MCP79 PCI Bridge (rev b1)
00:0a.0 Ethernet controller: NVIDIA Corporation MCP79 Ethernet (rev b1)
00:0b.0 SATA controller: NVIDIA Corporation MCP79 AHCI Controller (rev b1)
00:10.0 PCI bridge: NVIDIA Corporation MCP79 PCI Express Bridge (rev b1)
00:15.0 PCI bridge: NVIDIA Corporation MCP79 PCI Express Bridge (rev b1)
00:16.0 PCI bridge: NVIDIA Corporation MCP79 PCI Express Bridge (rev b1)
02:00.0 VGA compatible controller: NVIDIA Corporation ION VGA [GeForce 9400M] (rev b1)
03:00.0 Network controller: Broadcom Corporation BCM4312 802.11b/g LP-PHY (rev 01)
minig ~ #





Code:
minig log # eselect kernel list
Available kernel symlink targets:
  [1]   linux-3.12.21-gentoo-r1 *
minig log # uname -r
3.12.21-gentoo-r1
minig log # uname -a
Linux minig 3.12.21-gentoo-r1 #1 SMP Mon Jun 9 11:22:02 PDT 2014 i686 Intel(R) Atom(TM) CPU N270 @ 1.60GHz GenuineIntel GNU/Linux
minig log #





Code:

phredus@minig ~ $ startx
xauth:  file /home/phredus/.serverauth.4772 does not exist


X.Org X Server 1.15.0
Release Date: 2013-12-27
X Protocol Version 11, Revision 0
Build Operating System: Linux 3.10.7-gentoo-r1 i686 Gentoo
Current Operating System: Linux minig 3.12.21-gentoo-r1 #1 SMP Mon Jun 9 11:22:02 PDT 2014 i686
Kernel command line: BOOT_IMAGE=/kernel-genkernel-x86-3.12.21-gentoo-r1 root=UUID=24bdc2b7-f065-4520-a7d2-c3e62e7d5c55 ro
Build Date: 08 June 2014  03:03:16AM

Current version of pixman: 0.32.4
        Before reporting problems, check http://wiki.x.org
        to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
        (++) from command line, (!!) notice, (II) informational,
        (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Tue Jun 10 02:42:41 2014
(==) Using config file: "/etc/X11/xorg.conf"
(==) Using system config directory "/usr/share/X11/xorg.conf.d"
Initializing built-in extension Generic Event Extension
Initializing built-in extension SHAPE
Initializing built-in extension MIT-SHM
Initializing built-in extension XInputExtension
Initializing built-in extension XTEST
Initializing built-in extension BIG-REQUESTS
Initializing built-in extension SYNC
Initializing built-in extension XKEYBOARD
Initializing built-in extension XC-MISC
Initializing built-in extension XINERAMA
Initializing built-in extension XFIXES
Initializing built-in extension RENDER
Initializing built-in extension RANDR
Initializing built-in extension COMPOSITE
Initializing built-in extension DAMAGE
Initializing built-in extension MIT-SCREEN-SAVER
Initializing built-in extension DOUBLE-BUFFER
Initializing built-in extension RECORD
Initializing built-in extension DPMS
Initializing built-in extension Present
Initializing built-in extension DRI3
Initializing built-in extension X-Resource
Initializing built-in extension XVideo
Initializing built-in extension XVideo-MotionCompensation
Initializing built-in extension XFree86-VidModeExtension
Initializing built-in extension XFree86-DGA
Initializing built-in extension XFree86-DRI
Initializing built-in extension DRI2
Loading extension GLX
Loading extension NV-GLX
Loading extension NV-CONTROL
Loading extension XINERAMA
/etc/X11/xinit/xinitrc: line 59: twm: command not found
/etc/X11/xinit/xinitrc: line 63: exec: xterm: not found
/etc/X11/xinit/xinitrc: line 61: xterm: command not found
xinit: connection to X server lost

waiting for X server to shut down ..(EE) Server terminated successfully (0). Closing log file.

phredus@minig ~ $


Code:

minig log # nano -w /etc/conf.d/modules

modules_3_12_21-gentoo-r1="nvidia"



Code:

minig ~ # find /lib/modules/3.12.21-gentoo-r1/ -type f -iname '*.o' -or -iname '*.ko' | less
/lib/modules/3.12.21-gentoo-r1/video/nvidia.ko


Code:
  GNU nano 2.3.2          File: /etc/portage/make.conf

# These settings were set by the catalyst build script that automatically
# built this stage.
# Please consult /usr/share/portage/config/make.conf.example for a more
# detailed example.
CFLAGS="-O2 -march=atom -pipe"
CXXFLAGS="${CFLAGS}"
# WARNING: Changing your CHOST is not something that should be done lightly.
# Please consult http://www.gentoo.org/doc/en/change-chost.xml before changing.
CHOST="i686-pc-linux-gnu"
# These are the USE flags that were used in addition to what is provided by the
# profile used for building.
USE="bindist symlink x86 -gtk -gnome qt4 kde X nvidia udev xvmc policykit udisk$
PORTDIR="/usr/portage"
DISTDIR="${PORTDIR}/distfiles"
PKGDIR="${PORTDIR}/packages"
MAKEOPTS="-j2"

# This section added for X and KDE install#######
## (For mouse, keyboard, and Synaptics touchpad support)
INPUT_DEVICES="keyboard mouse evdev synaptics"
# VIDEO_CARDS="nvidia"
VIDEO_CARDS="fbdev nv vesa nvidia"
# VIDEO_CARDS="nouveau"
LINGUAS="en"
DISPLAYMANAGER="kdm"

GENTOO_MIRRORS="ftp://ftp.gtlib.gatech.edu/pub/gentoo ftp://ftp.ucsb.edu/pub/mi$

SYNC="rsync://rsync3.us.gentoo.org/gentoo-portage"


Last edited by Phredus on Fri Jun 13, 2014 11:27 am; edited 5 times in total
Back to top
View user's profile Send private message
VinzC
Advocate
Advocate


Joined: 17 Apr 2004
Posts: 4974
Location: Dark side of the mood

PostPosted: Tue Jun 10, 2014 12:35 pm    Post subject: Reply with quote

I think you need a legacy driver for that video card, like version 173-* . I'm not even sure version 304 would fit. Now it's not sure either the legacy version will fit recent kernels. In general NVIDIA have [been "kind" enough to] made updates to legacy version but you have to try and see if it works.

EDIT: See Gentoo Wiki.
_________________
Gentoo addict: tomorrow I quit, I promise!... Just one more emerge...
1739!
Back to top
View user's profile Send private message
chithanh
Developer
Developer


Joined: 05 Aug 2006
Posts: 2152
Location: Berlin, Germany

PostPosted: Tue Jun 10, 2014 2:51 pm    Post subject: Re: Fail to load X Server with nvidia drivers. GeForce 9400M Reply with quote

Phredus wrote:

Code:

phredus@minig ~ $ startx
[...]
/etc/X11/xinit/xinitrc: line 59: twm: command not found
/etc/X11/xinit/xinitrc: line 63: exec: xterm: not found
/etc/X11/xinit/xinitrc: line 61: xterm: command not found
xinit: connection to X server lost
You cannot run startx in the default configuration, unless you have these packages (xterm and twm) installed.
Either install them or switch your default desktop to something else. http://wiki.gentoo.org/wiki/Xorg/Configuration#Using_startx

Or avoid startx and use only a display manager through /etc/init.d/xdm.
Back to top
View user's profile Send private message
Phredus
n00b
n00b


Joined: 07 Feb 2013
Posts: 47

PostPosted: Wed Jun 11, 2014 10:05 am    Post subject: Partial success Reply with quote

I installed xterm, twm and xclock.
I get the desired result of of 3 white consoles and the clock on the screen.

I uninstalled xterm, twm and xclock.

Now I ran:
Code:
kdm

I get the kdm greet screen (sign on screen)
I put in username and password of user that is part of the "video" group.
I hit enter I see the nvidia green logo flash for a couple of seconds and after a couple of minutes the sign on scree is back, never started kde.

Help Please, thank you



Code:
phredus@minig ~ $ startx
xauth:  file /home/phredus/.serverauth.23430 does not exist


X.Org X Server 1.15.0
Release Date: 2013-12-27
X Protocol Version 11, Revision 0
Build Operating System: Linux 3.10.7-gentoo-r1 i686 Gentoo
Current Operating System: Linux minig 3.12.21-gentoo-r1 #1 SMP Mon Jun 9 11:22:02 PDT 2014 i686
Kernel command line: BOOT_IMAGE=/kernel-genkernel-x86-3.12.21-gentoo-r1 root=UUID=24bdc2b7-f065-4520-a7d2-c3e62e7d5c55 ro
Build Date: 08 June 2014  03:03:16AM

Current version of pixman: 0.32.4
        Before reporting problems, check http://wiki.x.org
        to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
        (++) from command line, (!!) notice, (II) informational,
        (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Tue Jun 10 22:53:58 2014
(==) Using config file: "/etc/X11/xorg.conf"
(==) Using system config directory "/usr/share/X11/xorg.conf.d"
Initializing built-in extension Generic Event Extension
Initializing built-in extension SHAPE
Initializing built-in extension MIT-SHM
Initializing built-in extension XInputExtension
Initializing built-in extension XTEST
Initializing built-in extension BIG-REQUESTS
Initializing built-in extension SYNC
Initializing built-in extension XKEYBOARD
Initializing built-in extension XC-MISC
Initializing built-in extension XINERAMA
Initializing built-in extension XFIXES
Initializing built-in extension RENDER
Initializing built-in extension RANDR
Initializing built-in extension COMPOSITE
Initializing built-in extension DAMAGE
Initializing built-in extension MIT-SCREEN-SAVER
Initializing built-in extension DOUBLE-BUFFER
Initializing built-in extension RECORD
Initializing built-in extension DPMS
Initializing built-in extension Present
Initializing built-in extension DRI3
Initializing built-in extension X-Resource
Initializing built-in extension XVideo
Initializing built-in extension XVideo-MotionCompensation
Initializing built-in extension XFree86-VidModeExtension
Initializing built-in extension XFree86-DGA
Initializing built-in extension XFree86-DRI
Initializing built-in extension DRI2
Loading extension GLX
Loading extension NV-GLX
Loading extension NV-CONTROL
Loading extension XINERAMA
/etc/X11/xinit/xinitrc: line 60: xclock: command not found
^Cxinit: connection to X server lost

waiting for X server to shut down XIO:  fatal IO error 0 (Success) on X server ":0"
      after 464 requests (464 known processed) with 0 events remaining.
xterm: fatal IO error 11 (Resource temporarily unavailable) or KillClient on X server ":0"
xterm: fatal IO error 11 (Resource temporarily unavailable) or KillClient on X server ":0"
xterm: fatal IO error 11 (Resource temporarily unavailable) or KillClient on X server ":0"
.(EE) Server terminated successfully (0). Closing log file.

xinit: unexpected signal 2
xauth: (argv):1:  bad display name "minig:0" in "remove" command
phredus@minig ~ $
Back to top
View user's profile Send private message
chithanh
Developer
Developer


Joined: 05 Aug 2006
Posts: 2152
Location: Berlin, Germany

PostPosted: Wed Jun 11, 2014 1:02 pm    Post subject: Reply with quote

You don't start kdm like that. The correct way is this:
/etc/conf.d/xdm:
DISPLAYMANAGER="kdm"

Code:
# /etc/init.d/xdm start

If kde will not start, you can choose failsafe from kdm session menu, which will only launch xterm. Then you can run "startkde" in the xterm to see which errors you get.
Back to top
View user's profile Send private message
Phredus
n00b
n00b


Joined: 07 Feb 2013
Posts: 47

PostPosted: Wed Jun 11, 2014 9:18 pm    Post subject: Thank you chithanh, here is the results so far Reply with quote

please look at all pertinent setting in my earlier outputs particularly in /etc/portage/make.conf.

Thank you



This set correctly:
Code:
/etc/conf.d/xdm:
DISPLAYMANAGER="kdm"


Ran:
Code:
/etc/init.d/xdm start



Returns:
Code:
minig ~ # /etc/init.d/xdm start
/etc/init.d/../conf.d/modules: line 9: modules_3_12_21-gentoo-r1=nvidia: command not found
 * modules: error loading /etc/init.d/../conf.d/modules
 * ERROR: modules failed to start
/etc/init.d/../conf.d/modules: line 9: modules_3_12_21-gentoo-r1=nvidia: command not found
 * modules: error loading /etc/init.d/../conf.d/modules
 * ERROR: modules failed to start
 * Setting up xdm ...                                                     [ ok ]
minig ~ #




Please see line 9 in:
/etc/init.d/../conf.d/modules:

Code:
  GNU nano 2.3.2       File: /etc/init.d/../conf.d/modules

# You can define a list modules for a specific kernel version,
# a released kernel version, a main kernel version or just a list.
# The most specific versioned variable will take precedence.
#modules_2_6_23_gentoo_r5="ieee1394 ohci1394"
#modules_2_6_23="tun ieee1394"
#modules_2_6="tun"
#modules_2="ipv6"
#modules="ohci1394"
modules_3_12_21-gentoo-r1="nvidia"

# You can give modules a different name when they load - the new name
# will also be used to pick arguments below.
#modules="dummy:dummy1"

# Give the modules some arguments if needed, per version if necessary.
# Again, the most specific versioned variable will take precedence.
#module_ieee1394_args="debug"
#module_ieee1394_args_2_6_23_gentoo_r5="debug2"
#module_ieee1394_args_2_6_23="debug3"
Back to top
View user's profile Send private message
Phredus
n00b
n00b


Joined: 07 Feb 2013
Posts: 47

PostPosted: Wed Jun 11, 2014 10:47 pm    Post subject: Error in Contents of /var/log/dmesg. IS RELATED? Reply with quote

Error in Contents of /var/log/dmesg. IS RELATED?

Please take a look, thank you.

GNU nano 2.3.2 File: /var/log/dmesg

[ 14.242070] hda_intel: Disabling MSI
[ 14.242123] snd_hda_intel 0000:00:08.0: setting latency timer to 64
[ 6.356302] qlogicfas: no cards were found, please specify I/O address and I$
[ 14.330420] systemd-udevd[1856]: renamed network interface eth0 to enp0s10
[ 14.330901] cfg80211: Calling CRDA to update world regulatory domain
[ 14.365682] microcode: CPU1 sig=0x106c2, pf=0x4, revision=0x212
[ 14.367472] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet$
[ 14.613703] b43-phy0: Broadcom 4312 WLAN found (core revision 15)
[ 14.710090] b43-phy0: Found PHY: Analog 6, Type 5 (LP), Revision 1
[ 14.770397] Broadcom 43xx driver loaded [ Features: PMNL ]
[ 15.373259] b43-phy0 ERROR: Firmware file "b43/ucode15.fw" not found
[ 15.373267] b43-phy0 ERROR: Firmware file "b43-open/ucode15.fw" not found
[ 15.373273] b43-phy0 ERROR: You must go to http://wireless.kernel.org/en/use$
[ 15.800677] nvidia: module license 'NVIDIA' taints kernel.
[ 15.800683] nvidia: module license 'NVIDIA' taints kernel.
[ 15.800689] Disabling lock debugging due to kernel taint
[ 18.171753] ACPI: PCI Interrupt Link [APMU] enabled at IRQ 20
[ 18.171853] pci 0000:00:10.0: setting latency timer to 64
[ 18.172868] ACPI: PCI Interrupt Link [AIGP] enabled at IRQ 23
[ 18.172903] nvidia 0000:02:00.0: setting latency timer to 64
[ 18.172914] vgaarb: device changed decodes: PCI:0000:02:00.0,olddecodes=io+m$
[ 18.174547] [drm] Initialized nvidia-drm 0.0.0 20130102 for 0000:02:00.0 on $
[ 18.175364] NVRM: loading NVIDIA UNIX x86 Kernel Module 334.21 Thu Feb 27 $
[ 19.440498] EXT4-fs (sda5): re-mounted. Opts: (null)
[ 19.795966] Adding 3145724k swap on /dev/sda8. Priority:-1 extents:1 across$
[ 19.921131] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts:$
Back to top
View user's profile Send private message
russK
l33t
l33t


Joined: 27 Jun 2006
Posts: 618

PostPosted: Wed Jun 11, 2014 10:59 pm    Post subject: Re: Thank you chithanh, here is the results so far Reply with quote

Code:

Please see line 9 in:
/etc/init.d/../conf.d/modules:

GNU nano 2.3.2       File: /etc/init.d/../conf.d/modules

# You can define a list modules for a specific kernel version,
# a released kernel version, a main kernel version or just a list.
# The most specific versioned variable will take precedence.
#modules_2_6_23_gentoo_r5="ieee1394 ohci1394"
#modules_2_6_23="tun ieee1394"
#modules_2_6="tun"
#modules_2="ipv6"
#modules="ohci1394"
modules_3_12_21-gentoo-r1="nvidia"

# You can give modules a different name when they load - the new name
# will also be used to pick arguments below.
#modules="dummy:dummy1"

# Give the modules some arguments if needed, per version if necessary.
# Again, the most specific versioned variable will take precedence.
#module_ieee1394_args="debug"
#module_ieee1394_args_2_6_23_gentoo_r5="debug2"
#module_ieee1394_args_2_6_23="debug3"



You can't have a '-' character in a variable name, that's why the error message 'command not found'.
Might want to skip the 3_12_21-gentoo-r1 and just say, "modules=..."
The other examples in the file seem to suggest -gentoo-r5 becomes _gentoo_r5.

I don't have nvidia in my /etc/conf.d/modules file however; I think Xorg must modprobe itself, works for me because lsmod shows it loaded.
Back to top
View user's profile Send private message
Phredus
n00b
n00b


Joined: 07 Feb 2013
Posts: 47

PostPosted: Fri Jun 13, 2014 10:36 pm    Post subject: Solved, Thank you very much guys. Reply with quote

All the fixes that were suggested were needed and helped but the last thing i tried was looking for "startkde".
I noticed startkde was missing from the system. I don't know if I missed it or somehow it was removed.
I emerged kdebase-startkde.
I now have a beautiful "kdegreet" :lol: login screen followed by a beautiful kde fully operational desktop.
the logs are clear of any errors other than minor warnings.
YOU GUYS ARE TERRIFIC. ESPECIALLY: russK, VinzC, franzf and especially chithanh.
THANK YOU FOR ALL THE HELP DURING THIS MADNESS.
Code:
  # emerge kdebase-startkde

All fixed and happy now!!!!!! :lol: :lol: :lol: "I Love Gentoo"
Back to top
View user's profile Send private message
VinzC
Advocate
Advocate


Joined: 17 Apr 2004
Posts: 4974
Location: Dark side of the mood

PostPosted: Sat Jun 14, 2014 9:30 am    Post subject: Reply with quote

Glad to be of any help 8) . You're most welcome.
_________________
Gentoo addict: tomorrow I quit, I promise!... Just one more emerge...
1739!
Back to top
View user's profile Send private message
Display posts from previous:   
Reply to topic    Gentoo Forums Forum Index Desktop Environments All times are GMT
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum