SemmZemm
n00b
Joined: 05 Jul 2013
Posts: 62
Location: France, Russia
|
 Posted: Sat Feb 22, 2014 8:13 pm Post subject: Failed to authenticate in WPA-EAP [SOLVED] |
 |
|
Hi,
After update of wpa_supplicant I cannot connect to my institutional network.
| Code: | equery u wpa_supplicant
[ Legend : U - final flag setting for installation]
[ : I - package is installed with flag ]
[ Colors : set, unset ]
* Found these USE flags for net-wireless/wpa_supplicant-2.1:
U I
+ + ap : Add support for access point mode
+ + dbus : Enable dbus support for anything that needs it (gpsd, gnomemeeting, etc)
+ + eap-sim : Add support for EAP-SIM authentication algorithm
- - fasteap : Add support for FAST-EAP authentication algorithm
+ + gnutls : Add support for net-libs/gnutls (TLS 1.0 and SSL 3.0 support)
+ + p2p : Add support for Wi-Fi Direct mode
+ + qt4 : Add support for the Qt GUI/Application Toolkit version 4.x
+ + readline : Enable support for libreadline, a GNU line-editing library that almost everyone wants
- - smartcard : Add support for smartcards
+ + ssl : Add support for Secure Socket Layer connections
- - wimax : Add support for Wimax EAP-PEER authentication algorithm
+ + wps : Add support for Wi-Fi Protected Setup
|
Here is my wpa_supplicant.conf
| Code: | ctrl_interface=DIR=/var/run/wpa_supplicant GROUP=wheel
fast_reauth=0
update_config=1
network={
ssid="eduroam"
scan_ssid=1
key_mgmt=WPA-EAP
eap=PEAP
identity="login"
password="password"
phase2="auth=MSCHAPV2"
}
network={
ssid="eduspot"
key_mgmt=NONE
auth_alg=OPEN
disabled=1
} |
Here is my wpa_supplicant.log.
| Code: | wlp4s0: Trying to associate with 00:26:cb:1d:7e:90 (SSID='eduroam' freq=2462 MHz)
wlp4s0: Association request to the driver failed
wlp4s0: Associated with 00:26:cb:1d:7e:90
wlp4s0: CTRL-EVENT-EAP-STARTED EAP authentication started
wlp4s0: CTRL-EVENT-EAP-PROPOSED-METHOD vendor=0 method=25
wlp4s0: CTRL-EVENT-EAP-METHOD EAP vendor 0 method 25 (PEAP) selected
wlp4s0: CTRL-EVENT-EAP-PEER-CERT depth=3 subject='/C=SE/O=AddTrust AB/OU=AddTrust External TTP Network/CN=AddTrust External CA Root'
wlp4s0: CTRL-EVENT-EAP-PEER-CERT depth=3 subject='/C=SE/O=AddTrust AB/OU=AddTrust External TTP Network/CN=AddTrust External CA Root'
wlp4s0: CTRL-EVENT-EAP-PEER-CERT depth=2 subject='/C=US/ST=UT/L=Salt Lake City/O=The USERTRUST Network/OU=http://www.usertrust.com/CN=UTN-USERFirst-Hardware'
wlp4s0: CTRL-EVENT-EAP-PEER-CERT depth=1 subject='/C=NL/O=TERENA/CN=TERENA SSL CA'
wlp4s0: CTRL-EVENT-EAP-PEER-CERT depth=0 subject='/OU=Domain Control Validated/CN=radius.ens-lyon.fr'
TLS: Server used client certificate
wlp4s0: CTRL-EVENT-EAP-TLS-CERT-ERROR reason=10 depth=0 subject='/OU=Domain Control Validated/CN=radius.ens-lyon.fr' err='Server used client certificate'
SSL: SSL3 alert: write (local SSL3 detected an error):fatal:unknown CA
OpenSSL: openssl_handshake - SSL_connect error:14090086:SSL routines:SSL3_GET_SERVER_CERTIFICATE:certificate verify failed
wlp4s0: CTRL-EVENT-EAP-FAILURE EAP authentication failed
wlp4s0: CTRL-EVENT-DISCONNECTED bssid=00:26:cb:1d:7e:90 reason=0
wlp4s0: CTRL-EVENT-SSID-TEMP-DISABLED id=0 ssid="eduroam" auth_failures=1 duration=10
wlp4s0: CTRL-EVENT-SSID-REENABLED id=0 ssid="eduroam"
|
The network is accessible from other devices.
What do I wrong?
Added: solved in net-wireless/wpa_supplicant-2.1-r1 |
|
Networking & Security
