Gentoo Forums
Gentoo Forums
Gentoo Forums
Quick Search: in
intel and ati mulithead optiplex 9020
View unanswered posts
View posts from last 24 hours

 
Reply to topic    Gentoo Forums Forum Index Desktop Environments
View previous topic :: View next topic  
Author Message
namecid
n00b
n00b


Joined: 05 Feb 2014
Posts: 5

PostPosted: Wed Feb 05, 2014 6:09 pm    Post subject: intel and ati mulithead optiplex 9020 Reply with quote

Hi,

I'm trying to configure my new Dell Optiplex 9020 system for multihead. I'm currently driving 2 monitors but I'm having trouble enabling the third screen. I see three screens in my GNOME Settings > Displays panel and my arandr output looks like it also sees the three screens properly. The two screens are driven by my Radeon HD 8570 card. I am trying to drive the third using the Intel HDMI slot. However, there is no output on the third screen.

Any thoughts or pointers to steer me in the right direction?


$ X -version

X.Org X Server 1.14.3
Release Date: 2013-09-12
X Protocol Version 11, Revision 0
Build Operating System: Linux 3.10.25-gentoo x86_64 Gentoo
Current Operating System: Linux boyson 3.10.25-gentoo #9 SMP Wed Jan 29 16:41:49 EST 2014 x86_64
Kernel command line: BOOT_IMAGE=/kernel-3.3.8-gentoo root=/dev/sda4 ro
Build Date: 29 January 2014 09:16:50PM

Current version of pixman: 0.32.4
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.




$ gnome-session --version
gnome-session 3.8.4



$ xrandr -q
Screen 0: minimum 320 x 200, current 4800 x 1200, maximum 16384 x 16384
DisplayPort-0 connected primary 1600x1200+3200+0 (normal left inverted right x axis y axis) 367mm x 275mm
1600x1200 60.0*+
1280x1024 75.0 60.0
1152x864 75.0
1024x768 75.1 60.0
800x600 75.0 60.3
640x480 75.0 60.0
720x400 70.1
DVI-0 connected 1600x1200+1600+0 (normal left inverted right x axis y axis) 367mm x 275mm
1600x1200 60.0*+
1280x1024 75.0 60.0
1152x864 75.0
1024x768 75.1 60.0
800x600 75.0 60.3
640x480 75.0 60.0
720x400 70.1
VGA1 disconnected (normal left inverted right x axis y axis)
HDMI1 connected 1600x1200+0+0 (normal left inverted right x axis y axis) 367mm x 275mm
1600x1200 60.0*+
1280x1024 75.0 60.0
1152x864 75.0
1024x768 75.1 60.0
800x600 75.0 60.3
640x480 75.0 60.0
720x400 70.1
DP2 disconnected (normal left inverted right x axis y axis)
HDMI2 disconnected (normal left inverted right x axis y axis)
DP3 disconnected (normal left inverted right x axis y axis)
1600x1200 (0x48) 162.0MHz
h: width 1600 start 1664 end 1856 total 2160 skew 0 clock 75.0KHz
v: height 1200 start 1201 end 1204 total 1250 clock 60.0Hz
1280x1024 (0x7e) 135.0MHz
h: width 1280 start 1296 end 1440 total 1688 skew 0 clock 80.0KHz
v: height 1024 start 1025 end 1028 total 1066 clock 75.0Hz
1280x1024 (0x7f) 108.0MHz
h: width 1280 start 1328 end 1440 total 1688 skew 0 clock 64.0KHz
v: height 1024 start 1025 end 1028 total 1066 clock 60.0Hz
1152x864 (0x80) 108.0MHz
h: width 1152 start 1216 end 1344 total 1600 skew 0 clock 67.5KHz
v: height 864 start 865 end 868 total 900 clock 75.0Hz
1024x768 (0x81) 78.8MHz
h: width 1024 start 1040 end 1136 total 1312 skew 0 clock 60.1KHz
v: height 768 start 769 end 772 total 800 clock 75.1Hz
1024x768 (0x82) 65.0MHz
h: width 1024 start 1048 end 1184 total 1344 skew 0 clock 48.4KHz
v: height 768 start 771 end 777 total 806 clock 60.0Hz
800x600 (0x83) 49.5MHz
h: width 800 start 816 end 896 total 1056 skew 0 clock 46.9KHz
v: height 600 start 601 end 604 total 625 clock 75.0Hz
800x600 (0x84) 40.0MHz
h: width 800 start 840 end 968 total 1056 skew 0 clock 37.9KHz
v: height 600 start 601 end 605 total 628 clock 60.3Hz
640x480 (0x85) 31.5MHz
h: width 640 start 656 end 720 total 840 skew 0 clock 37.5KHz
v: height 480 start 481 end 484 total 500 clock 75.0Hz
640x480 (0x86) 25.2MHz
h: width 640 start 656 end 752 total 800 skew 0 clock 31.5KHz
v: height 480 start 490 end 492 total 525 clock 60.0Hz
720x400 (0x87) 28.3MHz
h: width 720 start 738 end 846 total 900 skew 0 clock 31.5KHz
v: height 400 start 412 end 414 total 449 clock 70.1Hz


# lsmod
Module Size Used by
i915 563320 1
radeon 793762 2
e1000e 191350 0
ttm 60756 1 radeon
cfbfillrect 3754 2 i915,radeon
cfbimgblt 2143 2 i915,radeon
cfbcopyarea 3358 2 i915,radeon
drm_kms_helper 27839 2 i915,radeon


# lspci
00:00.0 Host bridge: Intel Corporation 4th Gen Core Processor DRAM Controller (rev 06)
00:01.0 PCI bridge: Intel Corporation Xeon E3-1200 v3/4th Gen Core Processor PCI Express x16 Controller (rev 06)
00:02.0 VGA compatible controller: Intel Corporation Xeon E3-1200 v3/4th Gen Core Processor Integrated Graphics Controller (rev 06)
00:03.0 Audio device: Intel Corporation Xeon E3-1200 v3/4th Gen Core Processor HD Audio Controller (rev 06)
00:14.0 USB controller: Intel Corporation 8 Series/C220 Series Chipset Family USB xHCI (rev 04)
00:16.0 Communication controller: Intel Corporation 8 Series/C220 Series Chipset Family MEI Controller #1 (rev 04)
00:16.3 Serial controller: Intel Corporation 8 Series/C220 Series Chipset Family KT Controller (rev 04)
00:19.0 Ethernet controller: Intel Corporation Ethernet Connection I217-LM (rev 04)
00:1a.0 USB controller: Intel Corporation 8 Series/C220 Series Chipset Family USB EHCI #2 (rev 04)
00:1b.0 Audio device: Intel Corporation 8 Series/C220 Series Chipset High Definition Audio Controller (rev 04)
00:1c.0 PCI bridge: Intel Corporation 8 Series/C220 Series Chipset Family PCI Express Root Port #1 (rev d4)
00:1c.1 PCI bridge: Intel Corporation 8 Series/C220 Series Chipset Family PCI Express Root Port #2 (rev d4)
00:1d.0 USB controller: Intel Corporation 8 Series/C220 Series Chipset Family USB EHCI #1 (rev 04)
00:1f.0 ISA bridge: Intel Corporation Q87 Express LPC Controller (rev 04)
00:1f.2 SATA controller: Intel Corporation 8 Series/C220 Series Chipset Family 6-port SATA Controller 1 [AHCI mode] (rev 04)
00:1f.3 SMBus: Intel Corporation 8 Series/C220 Series Chipset Family SMBus Controller (rev 04)
01:00.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] Oland [Radeon HD 8570]
01:00.1 Audio device: Advanced Micro Devices, Inc. [AMD/ATI] Cape Verde/Pitcairn HDMI Audio [Radeon HD 7700/7800 Series]
03:00.0 PCI bridge: Texas Instruments XIO2001 PCI Express-to-PCI Bridge
Back to top
View user's profile Send private message
chithanh
Developer
Developer


Joined: 05 Aug 2006
Posts: 2152
Location: Berlin, Germany

PostPosted: Thu Feb 06, 2014 1:10 am    Post subject: Reply with quote

Do you have compositing enabled? This is required for PRIME to display correctly.

Although your xrandr output seems to indicate that both drivers are loaded correctly, verify with xrandr --listproviders that both intel and radeon are there. If necessary, do the xrandr --setprovideroutputsource step manually instead of relying on your desktop environment's autoconfiguration.
Back to top
View user's profile Send private message
namecid
n00b
n00b


Joined: 05 Feb 2014
Posts: 5

PostPosted: Thu Feb 06, 2014 2:46 pm    Post subject: Reply with quote

thanks for the reply.

My GNOME version uses mutter for a compositing manager, it's enabled.

mutter --version
mutter 3.8.4


Output below from xrandr but still no display on the monitor...I've tried different monitors and cables but no success.


$ xrandr --listproviders
Providers: number : 2
Provider 0: id: 0x7d cap: 0xf, Source Output, Sink Output, Source Offload, Sink Offload crtcs: 2 outputs: 2 associated providers: 1 name:radeon
Provider 1: id: 0x47 cap: 0xb, Source Output, Sink Output, Sink Offload crtcs: 3 outputs: 5 associated providers: 1 name:Intel

$ xrandr --setprovideroutputsource 1 0

$ xrandr --output HDMI1 --auto --output DVI-0 --auto --right-of HDMI1 --output DisplayPort-0 --auto --right-of DVI-0
Back to top
View user's profile Send private message
namecid
n00b
n00b


Joined: 05 Feb 2014
Posts: 5

PostPosted: Thu Feb 06, 2014 2:48 pm    Post subject: Reply with quote

slight correction, I forgot to include one of the xrandr commands I'm using.

xrandr --setprovideroutputsource 1 0
xrandr --output HDMI1 --auto
xrandr --output HDMI1 --auto --output DVI-0 --auto --right-of HDMI1 --output DisplayPort-0 --auto --right-of DVI-0
Back to top
View user's profile Send private message
chithanh
Developer
Developer


Joined: 05 Aug 2006
Posts: 2152
Location: Berlin, Germany

PostPosted: Thu Feb 06, 2014 6:40 pm    Post subject: Reply with quote

Your configuration looks correct. You could try to upgrade xorg-server to 1.15 or the kernel to 3.13 to see if that helps.
Back to top
View user's profile Send private message
namecid
n00b
n00b


Joined: 05 Feb 2014
Posts: 5

PostPosted: Fri Feb 07, 2014 2:47 pm    Post subject: Reply with quote

upgrading X did not help. I haven't had time for a kernel upgrade.

X -version

X.Org X Server 1.15.0
Release Date: 2013-12-27
X Protocol Version 11, Revision 0
Build Operating System: Linux 3.10.25-gentoo x86_64 Gentoo
Current Operating System: Linux boyson 3.10.25-gentoo #9 SMP Wed Jan 29 16:41:49 EST 2014 x86_64
Kernel command line: BOOT_IMAGE=/kernel-3.3.8-gentoo root=/dev/sda4 ro
Build Date: 07 February 2014 09:29:54AM
Back to top
View user's profile Send private message
namecid
n00b
n00b


Joined: 05 Feb 2014
Posts: 5

PostPosted: Mon Feb 10, 2014 2:02 pm    Post subject: Reply with quote

upgraded kernel, no improvement.

$ uname -a
Linux boyson 3.13.2 #2 SMP Mon Feb 10 08:51:42 EST 2014 x86_64 Intel(R) Core(TM) i7-4770 CPU @ 3.40GHz GenuineIntel GNU/Linux

xrandr --listproviders
Providers: number : 2
Provider 0: id: 0x7d cap: 0xf, Source Output, Sink Output, Source Offload, Sink Offload crtcs: 2 outputs: 2 associated providers: 1 name:radeon
Provider 1: id: 0x47 cap: 0xb, Source Output, Sink Output, Sink Offload crtcs: 3 outputs: 5 associated providers: 1 name:Intel

$ xrandr -q
Screen 0: minimum 320 x 200, current 4800 x 1200, maximum 16384 x 16384
DisplayPort-0 connected primary 1600x1200+3200+0 (normal left inverted right x axis y axis) 367mm x 275mm
1600x1200 60.0*+
1280x1024 75.0 60.0
1152x864 75.0
1024x768 75.1 60.0
800x600 75.0 60.3
640x480 75.0 60.0
720x400 70.1
DVI-0 connected 1600x1200+1600+0 (normal left inverted right x axis y axis) 367mm x 275mm
1600x1200 60.0*+
1280x1024 75.0 60.0
1152x864 75.0
1024x768 75.1 60.0
800x600 75.0 60.3
640x480 75.0 60.0
720x400 70.1
VGA1 disconnected (normal left inverted right x axis y axis)
DP2 disconnected (normal left inverted right x axis y axis)
HDMI1 connected 1600x1200+0+0 (normal left inverted right x axis y axis) 367mm x 275mm
1600x1200 60.0*+
1280x1024 75.0 60.0
1152x864 75.0
1024x768 75.1 60.0
800x600 75.0 60.3
640x480 75.0 60.0
720x400 70.1
DP3 disconnected (normal left inverted right x axis y axis)
HDMI2 disconnected (normal left inverted right x axis y axis)
1600x1200 (0x48) 162.0MHz
h: width 1600 start 1664 end 1856 total 2160 skew 0 clock 75.0KHz
v: height 1200 start 1201 end 1204 total 1250 clock 60.0Hz
1280x1024 (0x7e) 135.0MHz
h: width 1280 start 1296 end 1440 total 1688 skew 0 clock 80.0KHz
v: height 1024 start 1025 end 1028 total 1066 clock 75.0Hz
1280x1024 (0x7f) 108.0MHz
h: width 1280 start 1328 end 1440 total 1688 skew 0 clock 64.0KHz
v: height 1024 start 1025 end 1028 total 1066 clock 60.0Hz
1152x864 (0x80) 108.0MHz
h: width 1152 start 1216 end 1344 total 1600 skew 0 clock 67.5KHz
v: height 864 start 865 end 868 total 900 clock 75.0Hz
1024x768 (0x81) 78.8MHz
h: width 1024 start 1040 end 1136 total 1312 skew 0 clock 60.1KHz
v: height 768 start 769 end 772 total 800 clock 75.1Hz
1024x768 (0x82) 65.0MHz
h: width 1024 start 1048 end 1184 total 1344 skew 0 clock 48.4KHz
v: height 768 start 771 end 777 total 806 clock 60.0Hz
800x600 (0x83) 49.5MHz
h: width 800 start 816 end 896 total 1056 skew 0 clock 46.9KHz
v: height 600 start 601 end 604 total 625 clock 75.0Hz
800x600 (0x84) 40.0MHz
h: width 800 start 840 end 968 total 1056 skew 0 clock 37.9KHz
v: height 600 start 601 end 605 total 628 clock 60.3Hz
640x480 (0x85) 31.5MHz
h: width 640 start 656 end 720 total 840 skew 0 clock 37.5KHz
v: height 480 start 481 end 484 total 500 clock 75.0Hz
640x480 (0x86) 25.2MHz
h: width 640 start 656 end 752 total 800 skew 0 clock 31.5KHz
v: height 480 start 490 end 492 total 525 clock 60.0Hz
720x400 (0x87) 28.3MHz
h: width 720 start 738 end 846 total 900 skew 0 clock 31.5KHz
v: height 400 start 412 end 414 total 449 clock 70.1Hz
Back to top
View user's profile Send private message
Display posts from previous:   
Reply to topic    Gentoo Forums Forum Index Desktop Environments All times are GMT
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum