Gentoo Forums
Gentoo Forums
Gentoo Forums
Quick Search: in
Gentoo on VIA VAB-600 - can't compile kernel for U-Boot:-)
View unanswered posts
View posts from last 24 hours

 
Reply to topic    Gentoo Forums Forum Index Kernel & Hardware
View previous topic :: View next topic  
Author Message
Januszzz
Guru
Guru


Joined: 04 Feb 2006
Posts: 367
Location: Opole, Poland

PostPosted: Fri Nov 29, 2013 7:28 pm    Post subject: Gentoo on VIA VAB-600 - can't compile kernel for U-Boot:-) Reply with quote

Hello,

I've installed Gentoo on this board - VIA VAB-600:

http://www.viaembedded.com/en/products/boards/2070/1/VAB-600_%28Pico-ITX%29.html

The only thing which is left "stock" is the kernel from debian which was compiled by Via. It is bootable through U-Boot and all is fine.

But I miss some features in the kernel and would like to compile by myself. I do it by "make uImage" and u-boot recognizes it.

I've taken many tries and used the config extracted from the kernel delivered from Via, prepared my own config, taken different sources... but all kernels fail to start!

http://postimg.org/image/scpme4zxx/

I'm fully alone, because Via has no real support and says all is in BSP, while there are not even files they say they should be...

Any ideas?

Thank you!


Last edited by Januszzz on Thu Dec 12, 2013 7:47 am; edited 1 time in total
Back to top
View user's profile Send private message
schorsch_76
Tux's lil' helper
Tux's lil' helper


Joined: 19 Jun 2012
Posts: 136

PostPosted: Fri Nov 29, 2013 8:12 pm    Post subject: Reply with quote

From my expirience with arm boards (Raspberry pi and Beaglebone), they need a patched kernel. Stock kernel dont work most of the time. You should look where via has put the kernel sources for that board.
Back to top
View user's profile Send private message
Januszzz
Guru
Guru


Joined: 04 Feb 2006
Posts: 367
Location: Opole, Poland

PostPosted: Fri Nov 29, 2013 8:27 pm    Post subject: Reply with quote

Thanks. Thay say that kernel sources are in BSP package, while there is no sources here... They also say that board is highly compatible with 3.0.8 kernel and gave only some BINARY drivers in compiled kernel modules... completely useless except the BSP kernel itself.

I would say that may be not a complete disaster, but the board is not user friendly.
Back to top
View user's profile Send private message
schorsch_76
Tux's lil' helper
Tux's lil' helper


Joined: 19 Jun 2012
Posts: 136

PostPosted: Fri Nov 29, 2013 8:59 pm    Post subject: Reply with quote

Since the kernel is GPL-2, they should give you that sources.
Back to top
View user's profile Send private message
Januszzz
Guru
Guru


Joined: 04 Feb 2006
Posts: 367
Location: Opole, Poland

PostPosted: Sun Dec 01, 2013 10:52 pm    Post subject: Reply with quote

All right,

some more mails to Via more and here we go - there are sources.

http://www.viaspringboard.com/via-vab-600-springboard-software-development-packages.html

These files include the same stuff as on main Via product site & more. Seems like they forgot to add stuff on main site :-/

Not good feeling about overall support & compiling those, but I'm to see yet how it goes.
Back to top
View user's profile Send private message
Januszzz
Guru
Guru


Joined: 04 Feb 2006
Posts: 367
Location: Opole, Poland

PostPosted: Thu Dec 12, 2013 7:48 am    Post subject: Reply with quote

and an update - I'm mostly done with kernel recompilation - it needs to be compiled using delivered GCC 4.5.2.
Back to top
View user's profile Send private message
Exogw
n00b
n00b


Joined: 04 Feb 2014
Posts: 1

PostPosted: Mon Feb 10, 2014 11:02 am    Post subject: Reply with quote

Hello

I read thisthread about recompiling the kernel for the VIA VAB-600 springboard. Did you just recompile it to get some new options or did you upgrade the kernel to a newer one?

I want to run XBMC on the springboard but have some problems and maybe a newer kernel would help.

Cheers,
Horst
Back to top
View user's profile Send private message
Display posts from previous:   
Reply to topic    Gentoo Forums Forum Index Kernel & Hardware All times are GMT
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum