Gentoo Forums
Gentoo Forums
Gentoo Forums
Quick Search: in
[portage] epatch_user , commande introuvable (résolu)
View unanswered posts
View posts from last 24 hours

 
Reply to topic    Gentoo Forums Forum Index French
View previous topic :: View next topic  
Author Message
alcorel
n00b
n00b


Joined: 02 Mar 2004
Posts: 68

PostPosted: Tue Nov 26, 2013 3:50 am    Post subject: [portage] epatch_user , commande introuvable (résolu) Reply with quote

Bonjour,

J'ai besoin d'inclure un patch dans un ebuild. La doc parle de epatch-user mais je n'arrive pas à le faire fonctionner.
Le patch est placé dans /etc/portage/patches/.../.patch et l'ebuild à modifié dans /usr/local/portage/.../.ebuild
Code:
/etc/portage/make.conf
PORTDIR_OVERLAY="/usr/local/portage"
LOCALPATCH_OVERLAY="/etc/portage/patches"


Pour appeler epatch_user dans mon ebuild, j'ai repris l'exemple de celui de firefox:
Code:
snort # nano snort-2.9.4.6.ebuild
src_prepare() {
        # Apply our patches
        EPATCH_SUFFIX="patch" \
        EPATCH_FORCE="yes" \
        epatch "${WORKDIR}/snort"

        epatch "${FILESDIR}/${PN}snortsam.patch

        # Allow user to apply any additional patches without modifing ebuild
        epatch_user
......


ensuite je crée le manifest et prepare l'ebuild:
Code:
# ebuild snort-2.9.4.6.ebuild clean
# ebuild snort-2.9.4.6.ebuild prepare
 * snort-2.9.4.6.tar.gz SHA256 SHA512 WHIRLPOOL size ;-) ...                     [ ok ]
 * checking ebuild checksums ;-) ...                                             [ ok ]
>>> Unpacking source...
>>> Unpacking snort-2.9.4.6.tar.gz to /var/tmp/portage/net-analyzer/snort-2.9.4.6/work
>>> Source unpacked in /var/tmp/portage/net-analyzer/snort-2.9.4.6/work
>>> Preparing source in /var/tmp/portage/net-analyzer/snort-2.9.4.6/work/snort-2.9.4.6 ...
/var/tmp/portage/net-analyzer/snort-2.9.4.6/temp/environment: ligne1958: epatch : commande introuvable
/var/tmp/portage/net-analyzer/snort-2.9.4.6/temp/environment: ligne1959: epatch : commande introuvable
/var/tmp/portage/net-analyzer/snort-2.9.4.6/temp/environment: ligne1960: epatch_user : commande introuvable
 * Applying multilib fix ...                                                     [ ok ]
 * Running eautoreconf in '/var/tmp/portage/net-analyzer/snort-2.9.4.6/work/snort-2.9.4.6' ...
 * Running libtoolize --install --copy --force --automake ...                    [ ok ]
 * Running aclocal -I m4 ...                                                     [ ok ]
 * Running autoconf -I m4 ...                                                    [ ok ]
 * Running autoheader -I m4 ...                                                  [ ok ]
 * Running automake --add-missing --copy --foreign ...                           [ ok ]
 * Running elibtoolize in: snort-2.9.4.6/
 *   Applying portage/1.2.0 patch ...
 *   Applying sed/1.5.6 patch ...
 *   Applying as-needed/2.4.2 patch ...
 *   Applying target-nm/2.4.2 patch ...
>>> Source prepared.


Savez vous si il y a quelques chose à modifier dans /usr/portage/eclasse/ eutils.eclass ?


Last edited by alcorel on Thu Nov 28, 2013 9:22 am; edited 1 time in total
Back to top
View user's profile Send private message
xaviermiller
Administrator
Administrator


Joined: 23 Jul 2004
Posts: 5935
Location: ~Brussels - Belgique

PostPosted: Tue Nov 26, 2013 7:18 am    Post subject: Reply with quote

Hello,

Apparemment, tu dois aussi inclure la "eclass" qu s'occupe de patcher.

Il te faudra creuser dans la doc, je ne connais pas par coeur tout cela ;)
_________________
Kind regards,
Xavier Miller
Back to top
View user's profile Send private message
alcorel
n00b
n00b


Joined: 02 Mar 2004
Posts: 68

PostPosted: Wed Nov 27, 2013 3:48 am    Post subject: Reply with quote

Salut!

En fait, niveau doc, c'est un peu le désert! :)
je n'ai aucune idée de la façon de renseigner le eclass utilisé. tu as vu cette info ou? :)
un moyen de forcer epatch_user au moment de la phase prepare de l'ebuild: (résultat identique pour ma part)
Code:
/etc/portage/bashrc
if [ "${EBUILD_PHASE}" == "prepare" ]; then
    echo ":: Calling epatch_user";
    pushd "${S}"
    epatch_user
    popd
fi


Le plus surprenant, c'est que, si je joue un peu avec l'ebuild de firefox, je n'ai aucun message d'erreur venant de epatch_user lors la phase prepare.
Back to top
View user's profile Send private message
xaviermiller
Administrator
Administrator


Joined: 23 Jul 2004
Posts: 5935
Location: ~Brussels - Belgique

PostPosted: Wed Nov 27, 2013 7:52 am    Post subject: Reply with quote

Google...

http://wiki.gentoo.org/wiki//etc/portage/patches
_________________
Kind regards,
Xavier Miller
Back to top
View user's profile Send private message
xaviermiller
Administrator
Administrator


Joined: 23 Jul 2004
Posts: 5935
Location: ~Brussels - Belgique

PostPosted: Wed Nov 27, 2013 10:54 am    Post subject: Reply with quote

et la doc complète: http://devmanual.gentoo.org/ebuild-writing/functions/src_prepare/epatch/index.html
_________________
Kind regards,
Xavier Miller
Back to top
View user's profile Send private message
alcorel
n00b
n00b


Joined: 02 Mar 2004
Posts: 68

PostPosted: Thu Nov 28, 2013 8:50 am    Post subject: Reply with quote

ça fonctionne:
En créant un script dans /etc/portage/env/epatch.sh contenant une bonne partie de eclass.eutils et un bashrc pointant vers epatch.sh

la solution ici: https://forums.gentoo.org/viewtopic-t-912200-start-0.html dernier post
Code:

snort # ebuild snort-2.9.4.6.ebuild prepare
 * snort-2.9.4.6.tar.gz SHA256 SHA512 WHIRLPOOL size ;-) ...                                                                                          [ ok ]
 * checking ebuild checksums ;-) ...                                                                                                                  [ ok ]
>>> Unpacking source...
>>> Unpacking snort-2.9.4.6.tar.gz to /var/tmp/portage/net-analyzer/snort-2.9.4.6/work
>>> Source unpacked in /var/tmp/portage/net-analyzer/snort-2.9.4.6/work
 * Applying user patches from /etc/portage/patches//net-analyzer/snort ...
 *  snort.patch ...


merci :)
Back to top
View user's profile Send private message
xaviermiller
Administrator
Administrator


Joined: 23 Jul 2004
Posts: 5935
Location: ~Brussels - Belgique

PostPosted: Thu Nov 28, 2013 9:28 am    Post subject: Reply with quote

Perso, j'aurais repris l'ebuild dans un overlay local, ajouté "inherit eutils", et "epatch" dans 'src_prepare()'
_________________
Kind regards,
Xavier Miller
Back to top
View user's profile Send private message
alcorel
n00b
n00b


Joined: 02 Mar 2004
Posts: 68

PostPosted: Thu Nov 28, 2013 9:38 am    Post subject: Reply with quote

en fait j'ai essayé mais j'ai eu un tas d'erreurs:

Code:
# ebuild snort-2.9.4.6.ebuild prepare
 * snort-2.9.4.6.tar.gz SHA256 SHA512 WHIRLPOOL size ;-) ...                                                              [ ok ]
 * checking ebuild checksums ;-) ...                                                                                      [ ok ]
>>> Unpacking source...
>>> Unpacking snort-2.9.4.6.tar.gz to /var/tmp/portage/net-analyzer/snort-2.9.4.6/work
>>> Source unpacked in /var/tmp/portage/net-analyzer/snort-2.9.4.6/work
>>> Preparing source in /var/tmp/portage/net-analyzer/snort-2.9.4.6/work/snort-2.9.4.6 ...
 * QA Notice: ECLASS 'eutils' inherited illegally in net-analyzer/snort-2.9.4.6 prepare
/usr/lib64/portage/bin/ebuild.sh: ligne 273 : unset: IUSE : « unset » impossible : variable est en lecture seule
/usr/lib64/portage/bin/ebuild.sh: ligne 273 : unset: REQUIRED_USE : « unset » impossible : variable est en lecture seule
/usr/lib64/portage/bin/ebuild.sh: ligne 273 : unset: DEPEND : « unset » impossible : variable est en lecture seule
/usr/lib64/portage/bin/ebuild.sh: ligne 273 : unset: RDEPEND : « unset » impossible : variable est en lecture seule
/usr/lib64/portage/bin/ebuild.sh: ligne 273 : unset: PDEPEND : « unset » impossible : variable est en lecture seule
/usr/lib64/portage/bin/ebuild.sh: ligne 273 : unset: HDEPEND : « unset » impossible : variable est en lecture seule
/usr/lib64/portage/bin/ebuild.sh: ligne 273 : unset: IUSE : « unset » impossible : variable est en lecture seule
/usr/lib64/portage/bin/ebuild.sh: ligne 273 : unset: REQUIRED_USE : « unset » impossible : variable est en lecture seule
/usr/lib64/portage/bin/ebuild.sh: ligne 273 : unset: DEPEND : « unset » impossible : variable est en lecture seule
/usr/lib64/portage/bin/ebuild.sh: ligne 273 : unset: RDEPEND : « unset » impossible : variable est en lecture seule
/usr/lib64/portage/bin/ebuild.sh: ligne 273 : unset: PDEPEND : « unset » impossible : variable est en lecture seule
/usr/lib64/portage/bin/ebuild.sh: ligne 273 : unset: HDEPEND : « unset » impossible : variable est en lecture seule
/usr/lib64/portage/bin/ebuild.sh: ligne291: IUSE : variable en lecture seule
 * The ebuild phase 'prepare' has exited unexpectedly. This type of
 * behavior is known to be triggered by things such as failed variable
 * assignments (bug #190128) or bad substitution errors (bug #200313).
 * Normally, before exiting, bash should have displayed an error message
 * above. If bash did not produce an error message above, it's possible
 * that the ebuild has called `exit` when it should have called `die`
 * instead. This behavior may also be triggered by a corrupt bash binary or
 * a hardware problem such as memory or cpu malfunction. If the problem is
 * not reproducible or it appears to occur randomly, then it is likely to
 * be triggered by a hardware problem. If you suspect a hardware problem
 * then you should try some basic hardware diagnostics such as memtest.
 * Please do not report this as a bug unless it is consistently
 * reproducible and you are sure that your bash binary and hardware are
 * functioning properly.
Back to top
View user's profile Send private message
xaviermiller
Administrator
Administrator


Joined: 23 Jul 2004
Posts: 5935
Location: ~Brussels - Belgique

PostPosted: Thu Nov 28, 2013 9:51 am    Post subject: Reply with quote

montre-nous l'ebuild steplé ;)
_________________
Kind regards,
Xavier Miller
Back to top
View user's profile Send private message
alcorel
n00b
n00b


Joined: 02 Mar 2004
Posts: 68

PostPosted: Thu Nov 28, 2013 11:01 am    Post subject: Reply with quote

j'ai modifié ça dans la partie prepare
Code:
nano snort-2.9.4.6.ebuild
 
src_prepare() {

inherit eutils
epatch
epatch_user
Back to top
View user's profile Send private message
boozo
Advocate
Advocate


Joined: 01 Jul 2004
Posts: 3178

PostPosted: Thu Nov 28, 2013 11:07 am    Post subject: Reply with quote

Pardonnez-moi, je crois que je n'ai sans doute pas bien compris le problème car de mémoire "epatch_user" est une feature qui permet à l'utilsateur de patcher simplement un prog sans rien devoir modifier dans l'ebuild 8O

Me semble qu'il suffisait juste de créer un repertoire dans /etc/portage/patches/<arb>/<apps>-<version> et d'y coller le patch à appliquer avant de relancer un --oneshot sur le prog en question

Aurais-je loupé qqch ?
_________________
" Un psychotique, c'est quelqu'un qui croit dur comme fer que 2 et 2 font 5, et qui en est pleinement satisfait.
Un névrosé, c'est quelqu'un qui sait pertinemment que 2 et 2 font 4, et ça le rend malade ! "
Back to top
View user's profile Send private message
xaviermiller
Administrator
Administrator


Joined: 23 Jul 2004
Posts: 5935
Location: ~Brussels - Belgique

PostPosted: Thu Nov 28, 2013 11:14 am    Post subject: Reply with quote

@alcorel
il faut mettre inherit hors de src_prepare()
regarde la doc que j'ai donnée.

@boozo: tous les ebuilds ne sont pas "user-friendly", et il faut les adapter.
_________________
Kind regards,
Xavier Miller
Back to top
View user's profile Send private message
alcorel
n00b
n00b


Joined: 02 Mar 2004
Posts: 68

PostPosted: Thu Nov 28, 2013 11:17 am    Post subject: Reply with quote

c'est effectivement le cas si d'origine, ton ebuild est déjà préparé pour la fonction epatch_user
Back to top
View user's profile Send private message
alcorel
n00b
n00b


Joined: 02 Mar 2004
Posts: 68

PostPosted: Thu Nov 28, 2013 11:24 am    Post subject: Reply with quote

XavierMiller wrote:
@alcorel
il faut mettre inherit hors de src_prepare()
regarde la doc que j'ai donnée..


effectivement, ça va tout de suite mieux au début de l'ebuild :
Code:
# Copyright 1999-2013 Gentoo Foundation
# Distributed under the terms of the GNU General Public License v2
# $Header: /var/cvsroot/gentoo-x86/net-analyzer/snort/snort-2.9.4.6.ebuild,v 1.$

EAPI="5"
inherit autotools multilib user
inherit eutils


Code:
 snort # ebuild snort-2.9.4.6.ebuild prepare
 * snort-2.9.4.6.tar.gz SHA256 SHA512 WHIRLPOOL size ;-) ...             [ ok ]
 * checking ebuild checksums ;-) ...                                     [ ok ]
>>> Unpacking source...
>>> Unpacking snort-2.9.4.6.tar.gz to /var/tmp/portage/net-analyzer/snort-2.9.4.6/work
>>> Source unpacked in /var/tmp/portage/net-analyzer/snort-2.9.4.6/work
>>> Preparing source in /var/tmp/portage/net-analyzer/snort-2.9.4.6/work/snort-2.9.4.6 ...

 * Cannot find $EPATCH_SOURCE!  Value for $EPATCH_SOURCE is:
 *
 *   /var/tmp/portage/net-analyzer/snort-2.9.4.6/work/patch
 *   ( patch )

 * ERROR: net-analyzer/snort-2.9.4.6::x-portage failed (prepare phase):
 *   Cannot find $EPATCH_SOURCE!
 *
 * Call stack:
 *     ebuild.sh, line   93:  Called src_prepare
 *   environment, line 3056:  Called epatch
 *   environment, line 1572:  Called die
 * The specific snippet of code:
 *                   die "Cannot find \$EPATCH_SOURCE!";
Back to top
View user's profile Send private message
xaviermiller
Administrator
Administrator


Joined: 23 Jul 2004
Posts: 5935
Location: ~Brussels - Belgique

PostPosted: Thu Nov 28, 2013 11:29 am    Post subject: Reply with quote

donne-nous l'ebuild complet stp !
_________________
Kind regards,
Xavier Miller
Back to top
View user's profile Send private message
alcorel
n00b
n00b


Joined: 02 Mar 2004
Posts: 68

PostPosted: Thu Nov 28, 2013 11:35 am    Post subject: Reply with quote

Code:
# Copyright 1999-2013 Gentoo Foundation
# Distributed under the terms of the GNU General Public License v2
# $Header: /var/cvsroot/gentoo-x86/net-analyzer/snort/snort-2.9.4.6.ebuild,v 1.2 2013/08/18 03:06:45 patrick Exp $

EAPI="5"
inherit autotools multilib user
inherit eutils

DESCRIPTION="The de facto standard for intrusion detection/prevention"
HOMEPAGE="http://www.snort.org/"
SRC_URI="http://snort.org/downloads/2320 -> ${P}.tar.gz"
LICENSE="GPL-2"
SLOT="0"
KEYWORDS="~amd64 ~arm ~mips ~ppc ~ppc64 ~sparc ~x86"
IUSE="static +dynamicplugin +zlib +gre +mpls +targetbased +decoder-preprocessor-rules
+ppm +perfprofiling linux-smp-stats inline-init-failopen +threads debug +active-response
+normalizer reload-error-restart +react +flexresp3 +paf large-pcap-64bit
aruba mysql odbc postgres selinux"

DEPEND=">=net-libs/libpcap-1.0.0
   >=net-libs/daq-0.6
   >=dev-libs/libpcre-6.0
   dev-libs/libdnet
   postgres? ( dev-db/postgresql-base )
   mysql? ( virtual/mysql )
   odbc? ( dev-db/unixODBC )
   zlib? ( sys-libs/zlib )"

RDEPEND="${DEPEND}
   selinux? ( sec-policy/selinux-snort )"

REQUIRED_USE="zlib? ( dynamicplugin )"

pkg_setup() {

   # pre_inst() is a better place to put this
   # but we need it here for the 'fowners' statements in src_install()
   enewgroup snort
   enewuser snort -1 -1 /dev/null snort

}

src_prepare() {

epatch
epatch_user

   #Multilib fix for the sf_engine
   ebegin "Applying multilib fix"
   sed -i -e 's|${exec_prefix}/lib|${exec_prefix}/'$(get_libdir)'|g' \
      "${WORKDIR}/${P}/src/dynamic-plugins/sf_engine/Makefile.am" \
      || die "sed for sf_engine failed"

   #Multilib fix for the curent set of dynamic-preprocessors
   for i in ftptelnet smtp ssh dns ssl dcerpc2 sdf imap pop rzb_saac sip reputation gtp modbus dnp3; do
      sed -i -e 's|${exec_prefix}/lib|${exec_prefix}/'$(get_libdir)'|g' \
         "${WORKDIR}/${P}/src/dynamic-preprocessors/$i/Makefile.am" \
         || die "sed for $i failed."
   done
   eend

   AT_M4DIR=m4 eautoreconf
}

src_configure() {

   econf \
      $(use_enable !static shared) \
      $(use_enable static) \
      $(use_enable static so-with-static-lib) \
      $(use_enable dynamicplugin) \
      $(use_enable zlib) \
      $(use_enable gre) \
      $(use_enable mpls) \
      $(use_enable targetbased) \
      $(use_enable decoder-preprocessor-rules) \
      $(use_enable ppm) \
      $(use_enable perfprofiling) \
      $(use_enable linux-smp-stats) \
      $(use_enable inline-init-failopen) \
      $(use_enable threads pthread) \
      $(use_enable debug) \
      $(use_enable debug debug-msgs) \
      $(use_enable debug corefiles) \
      $(use_enable !debug dlclose) \
      $(use_enable active-response) \
      $(use_enable normalizer) \
      $(use_enable reload-error-restart) \
      $(use_enable react) \
      $(use_enable flexresp3) \
      $(use_enable paf) \
      $(use_enable large-pcap-64bit large-pcap) \
      $(use_enable aruba) \
      $(use_with mysql) \
      $(use_with odbc) \
      $(use_with postgres postgresql) \
      --enable-ipv6 \
      --enable-reload \
      --disable-prelude \
      --disable-build-dynamic-examples \
      --disable-profile \
      --disable-ppm-test \
      --disable-intel-soft-cpm \
      --disable-static-daq \
      --disable-rzb-saac \
      --without-oracle
}

src_install() {

   emake DESTDIR="${D}" install

   dodir /var/log/snort \
      /var/run/snort \
      /etc/snort/rules \
      /etc/snort/so_rules \
      /usr/$(get_libdir)/snort_dynamicrules

   # config.log and build.log are needed by Sourcefire
   # to trouble shoot build problems and bug reports so we are
   # perserving them incase the user needs upstream support.
   dodoc RELEASE.NOTES ChangeLog \
      doc/* \
      tools/u2boat/README.u2boat

   insinto /etc/snort
   doins etc/attribute_table.dtd \
      etc/classification.config \
      etc/gen-msg.map \
      etc/reference.config \
      etc/threshold.conf \
      etc/unicode.map

   # We use snort.conf.distrib because the config file is complicated
   # and the one shipped with snort can change drastically between versions.
   # Users should migrate setting by hand and not with etc-update.
   newins etc/snort.conf snort.conf.distrib

   # config.log and build.log are needed by Sourcefire
   # to troubleshoot build problems and bug reports so we are
   # preserving them incase the user needs upstream support.
   if [ -f "${WORKDIR}/${PF}/config.log" ]; then
      dodoc "${WORKDIR}/${PF}/config.log"
   fi
   if [ -f "${T}/build.log" ]; then
      dodoc "${T}/build.log"
   fi

   insinto /etc/snort/preproc_rules
   doins preproc_rules/decoder.rules \
      preproc_rules/preprocessor.rules \
      preproc_rules/sensitive-data.rules

   fowners -R snort:snort \
      /var/log/snort \
      /var/run/snort \
      /etc/snort

   newinitd "${FILESDIR}/snort.rc12" snort
   newconfd "${FILESDIR}/snort.confd.2" snort

   # Sourcefire uses Makefiles to install docs causing Bug #297190.
   # This removes the unwanted doc directory and rogue Makefiles.
   rm -rf "${D}"usr/share/doc/snort || die "Failed to remove SF doc directories"
   rm "${D}"usr/share/doc/"${PF}"/Makefile* || die "Failed to remove doc make files"

   #Remove unneeded .la files (Bug #382863)
   rm "${D}"usr/$(get_libdir)/snort_dynamicengine/libsf_engine.la || die
   rm "${D}"usr/$(get_libdir)/snort_dynamicpreprocessor/libsf_*_preproc.la || die "Failed to remove libsf_?_preproc.la"

   # Set the correct lib path for dynamicengine, dynamicpreprocessor, and dynamicdetection
   sed -i -e 's|/usr/local/lib|/usr/'$(get_libdir)'|g' \
      "${D}etc/snort/snort.conf.distrib" || die

   # Set the correct rule location in the config
   sed -i -e 's|RULE_PATH ../rules|RULE_PATH /etc/snort/rules|g' \
      "${D}etc/snort/snort.conf.distrib" || die

   # Set the correct preprocessor/decoder rule location in the config
   sed -i -e 's|PREPROC_RULE_PATH ../preproc_rules|PREPROC_RULE_PATH /etc/snort/preproc_rules|g' \
      "${D}etc/snort/snort.conf.distrib" || die

   # Enable the preprocessor/decoder rules
   sed -i -e 's|^# include $PREPROC_RULE_PATH|include $PREPROC_RULE_PATH|g' \
      "${D}etc/snort/snort.conf.distrib" || die

   sed -i -e 's|^# dynamicdetection directory|dynamicdetection directory|g' \
      "${D}etc/snort/snort.conf.distrib" || die

   # Just some clean up of trailing /'s in the config
   sed -i -e 's|snort_dynamicpreprocessor/$|snort_dynamicpreprocessor|g' \
      "${D}etc/snort/snort.conf.distrib" || die

   # Make it clear in the config where these are...
   sed -i -e 's|^include classification.config|include /etc/snort/classification.config|g' \
      "${D}etc/snort/snort.conf.distrib" || die

   sed -i -e 's|^include reference.config|include /etc/snort/reference.config|g' \
      "${D}etc/snort/snort.conf.distrib" || die

   # Disable all rule files by default.
   sed -i -e 's|^include $RULE_PATH|# include $RULE_PATH|g' \
      "${D}etc/snort/snort.conf.distrib" || die

   # Disable normalizer preprocessor config if normalizer USE flag not set.
   if ! use normalizer; then
      sed -i -e 's|^preprocessor normalize|#preprocessor normalize|g' \
         "${D}etc/snort/snort.conf.distrib" || die
   fi

   # Set the configured DAQ to afpacket
   sed -i -e 's|^# config daq: <type>|config daq: afpacket|g' \
      "${D}etc/snort/snort.conf.distrib" || die

   # Set the location of the DAQ modules
   sed -i -e 's|^# config daq_dir: <dir>|config daq_dir: /usr/'$(get_libdir)'/daq|g' \
      "${D}etc/snort/snort.conf.distrib" || die

   # Set the DAQ mode to passive
   sed -i -e 's|^# config daq_mode: <mode>|config daq_mode: passive|g' \
      "${D}etc/snort/snort.conf.distrib" || die

   # Set snort to run as snort:snort
   sed -i -e 's|^# config set_gid:|config set_gid: snort|g' \
      "${D}etc/snort/snort.conf.distrib" || die
   sed -i -e 's|^# config set_uid:|config set_uid: snort|g' \
      "${D}etc/snort/snort.conf.distrib" || die

   # Set the default log dir
   sed -i -e 's|^# config logdir:|config logdir: /var/log/snort/|g' \
      "${D}etc/snort/snort.conf.distrib" || die

   # Set the correct so_rule location in the config
    sed -i -e 's|SO_RULE_PATH ../so_rules|SO_RULE_PATH /etc/snort/so_rules|g' \
       "${D}etc/snort/snort.conf.distrib" || die
}

pkg_postinst() {

   einfo "There have been a number of improvements and new features"
   einfo "added to ${P}. Please review the RELEASE.NOTES and"
   einfo "ChangLog located in /usr/share/doc/${PF}."
   einfo
   elog "The Sourcefire Vulnerability Research Team (VRT) recommends that"
   elog "users migrate their snort.conf customizations to the latest config"
   elog "file released by the VRT. You can find the latest version of the"
   elog "Snort config file in /etc/snort/snort.conf.distrib."
   elog
   elog "!! It is important that you migrate to this new snort.conf file !!"
   elog
   elog "This version of the ebuild includes an updated init.d file and"
   elog "conf.d file that rely on options found in the latest Snort"
   elog "config file provided by the VRT."

   if use debug; then
      elog "You have the 'debug' USE flag enabled. If this has been done to"
      elog "troubleshoot an issue by producing a core dump or a back trace,"
      elog "then you need to also ensure the FEATURES variable in make.conf"
      elog "contains the 'nostrip' option."
   fi
}
Back to top
View user's profile Send private message
xaviermiller
Administrator
Administrator


Joined: 23 Jul 2004
Posts: 5935
Location: ~Brussels - Belgique

PostPosted: Thu Nov 28, 2013 11:38 am    Post subject: Reply with quote

non, l'ebuild modifiée qui pose problème...
_________________
Kind regards,
Xavier Miller
Back to top
View user's profile Send private message
alcorel
n00b
n00b


Joined: 02 Mar 2004
Posts: 68

PostPosted: Thu Nov 28, 2013 11:38 am    Post subject: Reply with quote

j'ai édité, désolé
Back to top
View user's profile Send private message
xaviermiller
Administrator
Administrator


Joined: 23 Jul 2004
Posts: 5935
Location: ~Brussels - Belgique

PostPosted: Thu Nov 28, 2013 1:31 pm    Post subject: Reply with quote

pourquoi mets-tu epatch tout seul ?
epatch demande un nom de fichier comme argument (un patch fourni par l'ebuild).
_________________
Kind regards,
Xavier Miller
Back to top
View user's profile Send private message
alcorel
n00b
n00b


Joined: 02 Mar 2004
Posts: 68

PostPosted: Sat Nov 30, 2013 10:33 am    Post subject: Reply with quote

désolé petite galère d'internet.

en fait cela fonctionne parfaitement comme tu le disais plus haut

epatch_user dans la partie prepare, inherit eutils en haut de l'ebuild.
Back to top
View user's profile Send private message
Display posts from previous:   
Reply to topic    Gentoo Forums Forum Index French All times are GMT
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum