Gentoo Forums
Gentoo Forums
Gentoo Forums
Quick Search: in
Gnome 3 black screen with NVIDIA optimus
View unanswered posts
View posts from last 24 hours

 
Reply to topic    Gentoo Forums Forum Index Desktop Environments
View previous topic :: View next topic  
Author Message
n3bul4
Apprentice
Apprentice


Joined: 04 Nov 2003
Posts: 173

PostPosted: Mon Dec 09, 2013 1:20 pm    Post subject: Gnome 3 black screen with NVIDIA optimus Reply with quote

Hey guys,

I am really stuck on this.

I have a Samsung Laptop with built in NVIDIA Optimus graphics card.
When I am using the X11 opengl interface my Gnome 3 desktop works as expected.
(without the need of an xorg.conf)

Obviously I would like to use my NVIDIA GPU and the NVIDIA opengl interface.

Code:

# lspci | egrep "NV|VGA"
00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09)
01:00.0 3D controller: NVIDIA Corporation GF119M [GeForce GT 520MX] (rev a1)


When I try to switch to the NVIDIA opengl interface by issuing the following command:

Code:

# eselect opengl list
Available OpenGL implementations:
  [1]   nvidia
  [2]   xorg-x11 *
# eselect opengl set 1
Switching to nvidia OpenGL interface... done


and using the following xorg.conf:

Code:

Section "ServerLayout"
    Identifier "layout"
    Screen 0 "nvidia"
    Inactive "intel"
EndSection

Section "Device"
    Identifier "nvidia"
    Driver "nvidia"
    BusID "PCI:01:00:0"
EndSection

Section "Screen"
    Identifier "nvidia"
    Device "nvidia"
    # Uncomment this line if your computer has no display devices connected to
    # the NVIDIA GPU.  Leave it commented if you have display devices
    # connected to the NVIDIA GPU that you would like to use.
    #Option "UseDisplayDevice" "none"
EndSection

Section "Device"
    Identifier "intel"
    Driver "modesetting"
    BusID "PCI:00:02:0"
EndSection

Section "Screen"
    Identifier "intel"
    Device "intel"
EndSection


Starting up gdm shows me a black screen.

I read a lot of howtos and figured out that I have to enter the following commands:

Code:

xrandr --setprovideroutputsource modesetting NVIDIA-0
xrandr --auto


Obviously this was not working because xrandr was not able to find my display as I was issuing the command from a simple login shell.

Therefor I had to modify the commands by setting the display as parameter to the xrandr command as follows:

Code:

xrandr -d :0 --setprovideroutputsource modesetting NVIDIA-0
xrandr -d :0 --auto


This was working without any errors, but my screen stays black and nothing seems to happen.
I took a look at the Xorg.0.log file but could not find any errors except of the last line (setversion 1.4 failed)

Code:

[  2611.752]
X.Org X Server 1.14.3
Release Date: 2013-09-12
[  2611.752] X Protocol Version 11, Revision 0
[  2611.752] Build Operating System: Linux 3.10.17-gentoo x86_64 Gentoo
[  2611.752] Current Operating System: Linux pandora 3.10.17-gentoo #2 SMP Fri Nov 29 13:31:02 CET 2013 x86_64
[  2611.752] Kernel command line: BOOT_IMAGE=/vmlinuz-3.10.17-gentoo root=UUID=a36c2fa7-587b-4a20-b8a1-1724ed02bba2 ro real_init=/usr/lib/systemd/systemd rootfstype=ext4
[  2611.752] Build Date: 07 December 2013  08:08:13PM
[  2611.752] 
[  2611.752] Current version of pixman: 0.32.4
[  2611.752]    Before reporting problems, check http://wiki.x.org
   to make sure that you have the latest version.
[  2611.752] Markers: (--) probed, (**) from config file, (==) default setting,
   (++) from command line, (!!) notice, (II) informational,
   (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[  2611.752] (==) Log file: "/var/log/Xorg.0.log", Time: Mon Dec  9 13:50:00 2013
[  2611.752] (==) Using config file: "/etc/X11/xorg.conf"
[  2611.752] (==) Using config directory: "/etc/X11/xorg.conf.d"
[  2611.752] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[  2611.752] (==) ServerLayout "layout"
[  2611.752] (**) |-->Screen "nvidia" (0)
[  2611.752] (**) |   |-->Monitor "<default monitor>"
[  2611.753] (**) |   |-->Device "nvidia"
[  2611.753] (==) No monitor specified for screen "nvidia".
   Using a default monitor configuration.
[  2611.753] (**) |-->Inactive Device "intel"
[  2611.753] (==) Automatically adding devices
[  2611.753] (==) Automatically enabling devices
[  2611.753] (==) Automatically adding GPU devices
[  2611.753] (WW) The directory "/usr/share/fonts/TTF/" does not exist.
[  2611.753]    Entry deleted from font path.
[  2611.753] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[  2611.753]    Entry deleted from font path.
[  2611.753] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
[  2611.753]    Entry deleted from font path.
[  2611.753] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[  2611.753]    Entry deleted from font path.
[  2611.753]    (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[  2611.753] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[  2611.753]    Entry deleted from font path.
[  2611.753]    (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[  2611.753] (==) FontPath set to:
   /usr/share/fonts/misc/
[  2611.753] (==) ModulePath set to "/usr/lib64/xorg/modules"
[  2611.753] (II) The server relies on udev to provide the list of input devices.
   If no devices become available, reconfigure udev or disable AutoAddDevices.
[  2611.753] (II) Loader magic: 0x7fec00
[  2611.753] (II) Module ABI versions:
[  2611.753]    X.Org ANSI C Emulation: 0.4
[  2611.753]    X.Org Video Driver: 14.1
[  2611.753]    X.Org XInput driver : 19.1
[  2611.753]    X.Org Server Extension : 7.0
[  2611.753] (II) xfree86: Adding drm device (/dev/dri/card1)
[  2611.753] (II) xfree86: Adding drm device (/dev/dri/card0)
[  2611.754] (--) PCI:*(0:0:2:0) 8086:0126:144d:c606 rev 9, Mem @ 0xe1000000/4194304, 0xd0000000/268435456, I/O @ 0x00004000/64
[  2611.754] (--) PCI: (0:1:0:0) 10de:1051:144d:c606 rev 161, Mem @ 0xe0000000/16777216, 0xb0000000/268435456, 0xc0000000/33554432, I/O @ 0x00003000/128
[  2611.754] Initializing built-in extension Generic Event Extension
[  2611.754] Initializing built-in extension SHAPE
[  2611.754] Initializing built-in extension MIT-SHM
[  2611.754] Initializing built-in extension XInputExtension
[  2611.754] Initializing built-in extension XTEST
[  2611.754] Initializing built-in extension BIG-REQUESTS
[  2611.754] Initializing built-in extension SYNC
[  2611.754] Initializing built-in extension XKEYBOARD
[  2611.754] Initializing built-in extension XC-MISC
[  2611.754] Initializing built-in extension XINERAMA
[  2611.754] Initializing built-in extension XFIXES
[  2611.754] Initializing built-in extension RENDER
[  2611.754] Initializing built-in extension RANDR
[  2611.754] Initializing built-in extension COMPOSITE
[  2611.754] Initializing built-in extension DAMAGE
[  2611.754] Initializing built-in extension MIT-SCREEN-SAVER
[  2611.754] Initializing built-in extension DOUBLE-BUFFER
[  2611.754] Initializing built-in extension RECORD
[  2611.754] Initializing built-in extension DPMS
[  2611.754] Initializing built-in extension X-Resource
[  2611.754] Initializing built-in extension XVideo
[  2611.754] Initializing built-in extension XVideo-MotionCompensation
[  2611.754] Initializing built-in extension XFree86-VidModeExtension
[  2611.754] Initializing built-in extension XFree86-DGA
[  2611.754] Initializing built-in extension XFree86-DRI
[  2611.754] Initializing built-in extension DRI2
[  2611.754] (II) "glx" will be loaded. This was enabled by default and also specified in the config file.
[  2611.755] (II) LoadModule: "record"
[  2611.755] (II) Module "record" already built-in
[  2611.755] (II) LoadModule: "extmod"
[  2611.755] (II) Module "extmod" already built-in
[  2611.755] (II) LoadModule: "dbe"
[  2611.755] (II) Module "dbe" already built-in
[  2611.755] (II) LoadModule: "glx"
[  2611.755] (II) Loading /usr/lib64/xorg/modules/extensions/libglx.so
[  2611.766] (II) Module glx: vendor="NVIDIA Corporation"
[  2611.766]    compiled for 4.0.2, module version = 1.0.0
[  2611.766]    Module class: X.Org Server Extension
[  2611.766] (II) NVIDIA GLX Module  331.20  Wed Oct 30 17:36:48 PDT 2013
[  2611.766] Loading extension GLX
[  2611.766] (II) LoadModule: "nvidia"
[  2611.766] (II) Loading /usr/lib64/xorg/modules/drivers/nvidia_drv.so
[  2611.767] (II) Module nvidia: vendor="NVIDIA Corporation"
[  2611.767]    compiled for 4.0.2, module version = 1.0.0
[  2611.767]    Module class: X.Org Video Driver
[  2611.767] (II) LoadModule: "nvidia"
[  2611.767] (II) Loading /usr/lib64/xorg/modules/drivers/nvidia_drv.so
[  2611.767] (II) Module nvidia: vendor="NVIDIA Corporation"
[  2611.767]    compiled for 4.0.2, module version = 1.0.0
[  2611.767]    Module class: X.Org Video Driver
[  2611.767] (II) UnloadModule: "nvidia"
[  2611.767] (II) Unloading nvidia
[  2611.767] (II) Failed to load module "nvidia" (already loaded, 0)
[  2611.767] (II) LoadModule: "modesetting"
[  2611.767] (II) Loading /usr/lib64/xorg/modules/drivers/modesetting_drv.so
[  2611.767] (II) Module modesetting: vendor="X.Org Foundation"
[  2611.767]    compiled for 1.14.3, module version = 0.8.0
[  2611.767]    Module class: X.Org Video Driver
[  2611.767]    ABI class: X.Org Video Driver, version 14.1
[  2611.767] (II) NVIDIA dlloader X Driver  331.20  Wed Oct 30 17:16:53 PDT 2013
[  2611.767] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[  2611.767] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[  2611.767] (++) using VT number 7

[  2611.772] (II) Loading sub module "fb"
[  2611.772] (II) LoadModule: "fb"
[  2611.772] (II) Loading /usr/lib64/xorg/modules/libfb.so
[  2611.773] (II) Module fb: vendor="X.Org Foundation"
[  2611.773]    compiled for 1.14.3, module version = 1.0.0
[  2611.773]    ABI class: X.Org ANSI C Emulation, version 0.4
[  2611.773] (WW) Unresolved symbol: fbGetGCPrivateKey
[  2611.773] (II) Loading sub module "wfb"
[  2611.773] (II) LoadModule: "wfb"
[  2611.773] (II) Loading /usr/lib64/xorg/modules/libwfb.so
[  2611.773] (II) Module wfb: vendor="X.Org Foundation"
[  2611.773]    compiled for 1.14.3, module version = 1.0.0
[  2611.773]    ABI class: X.Org ANSI C Emulation, version 0.4
[  2611.773] (II) Loading sub module "ramdac"
[  2611.773] (II) LoadModule: "ramdac"
[  2611.773] (II) Module "ramdac" already built-in
[  2611.773] (II) modesetting(1): using drv /dev/dri/card0
[  2611.773] (II) modesetting(G0): using drv /dev/dri/card0
[  2611.773] (EE) Screen 1 deleted because of no matching config section.
[  2611.773] (II) UnloadModule: "modesetting"
[  2611.773] (II) NVIDIA(0): Creating default Display subsection in Screen section
   "nvidia" for depth/fbbpp 24/32
[  2611.773] (==) NVIDIA(0): Depth 24, (==) framebuffer bpp 32
[  2611.773] (==) NVIDIA(0): RGB weight 888
[  2611.773] (==) NVIDIA(0): Default visual is TrueColor
[  2611.773] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[  2611.773] (**) NVIDIA(0): Enabling 2D acceleration
[  2611.899] (WW) NVIDIA(0): Unable to read EDID for display device CRT-0
[  2611.899] (II) NVIDIA(GPU-0): Found DRM driver nvidia-drm (20130102)
[  2611.900] (II) NVIDIA(0): NVIDIA GPU GeForce GT 520MX (GF119) at PCI:1:0:0 (GPU-0)
[  2611.900] (--) NVIDIA(0): Memory: 1048576 kBytes
[  2611.900] (--) NVIDIA(0): VideoBIOS: 75.19.2b.00.03
[  2611.900] (II) NVIDIA(0): Detected PCI Express Link width: 16X
[  2611.902] (--) NVIDIA(0): Valid display device(s) on GeForce GT 520MX at PCI:1:0:0
[  2611.902] (--) NVIDIA(0):     CRT-0 (boot, connected)
[  2611.902] (--) NVIDIA(0): CRT-0: 400.0 MHz maximum pixel clock
[  2611.902] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[  2611.902] (**) NVIDIA(0):     device CRT-0 (Using EDID frequencies has been enabled on
[  2611.902] (**) NVIDIA(0):     all display devices.)
[  2611.903] (==) NVIDIA(0):
[  2611.903] (==) NVIDIA(0): No modes were requested; the default mode "nvidia-auto-select"
[  2611.903] (==) NVIDIA(0):     will be used as the requested mode.
[  2611.903] (==) NVIDIA(0):
[  2611.903] (II) NVIDIA(0): Validated MetaModes:
[  2611.903] (II) NVIDIA(0):     "CRT-0:nvidia-auto-select"
[  2611.903] (II) NVIDIA(0): Virtual screen size determined to be 1024 x 768
[  2611.906] (WW) NVIDIA(0): Unable to get display device CRT-0's EDID; cannot compute DPI
[  2611.906] (WW) NVIDIA(0):     from CRT-0's EDID.
[  2611.906] (==) NVIDIA(0): DPI set to (75, 75); computed from built-in default
[  2611.906] (==) modesetting(G0): Depth 24, (==) framebuffer bpp 32
[  2611.906] (==) modesetting(G0): RGB weight 888
[  2611.906] (==) modesetting(G0): Default visual is TrueColor
[  2611.906] (II) modesetting(G0): ShadowFB: preferred YES, enabled YES
[  2611.906] (II) modesetting(G0): Output LVDS-0 has no monitor section
[  2611.907] (II) modesetting(G0): Output VGA-0 has no monitor section
[  2611.907] (II) modesetting(G0): Output HDMI-0 has no monitor section
[  2611.907] (II) modesetting(G0): Output DisplayPort-0 has no monitor section
[  2611.907] (II) modesetting(G0): EDID for output LVDS-0
[  2611.908] (II) modesetting(G0): Manufacturer: SEC  Model: 364d  Serial#: 0
[  2611.908] (II) modesetting(G0): Year: 2011  Week: 0
[  2611.908] (II) modesetting(G0): EDID Version: 1.3
[  2611.908] (II) modesetting(G0): Digital Display Input
[  2611.908] (II) modesetting(G0): Max Image Size [cm]: horiz.: 38  vert.: 21
[  2611.908] (II) modesetting(G0): Gamma: 2.20
[  2611.908] (II) modesetting(G0): No DPMS capabilities specified
[  2611.908] (II) modesetting(G0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[  2611.908] (II) modesetting(G0): First detailed timing is preferred mode
[  2611.908] (II) modesetting(G0): redX: 0.615 redY: 0.362   greenX: 0.348 greenY: 0.624
[  2611.908] (II) modesetting(G0): blueX: 0.146 blueY: 0.075   whiteX: 0.313 whiteY: 0.329
[  2611.908] (II) modesetting(G0): Manufacturer's mask: 0
[  2611.908] (II) modesetting(G0): Supported detailed timing:
[  2611.908] (II) modesetting(G0): clock: 107.8 MHz   Image Size:  382 x 214 mm
[  2611.908] (II) modesetting(G0): h_active: 1600  h_sync: 1648  h_sync_end 1680 h_blank_end 1888 h_border: 0
[  2611.908] (II) modesetting(G0): v_active: 900  v_sync: 902  v_sync_end 908 v_blanking: 950 v_border: 0
[  2611.908] (II) modesetting(G0): Unknown vendor-specific block f
[  2611.908] (II) modesetting(G0):  SAMSUNG
[  2611.908] (II) modesetting(G0):  LTN173KT028
[  2611.908] (II) modesetting(G0): EDID (in hex):
[  2611.908] (II) modesetting(G0):    00ffffffffffff004ca34d3600000000
[  2611.908] (II) modesetting(G0):    00150103802615780ab3959d5c599f25
[  2611.908] (II) modesetting(G0):    13505400000001010101010101010101
[  2611.908] (II) modesetting(G0):    010101010101202a4020618432303020
[  2611.908] (II) modesetting(G0):    26007ed6100000190000000f00000000
[  2611.908] (II) modesetting(G0):    00000000001eb4027400000000fe0053
[  2611.908] (II) modesetting(G0):    414d53554e470a2020202020000000fe
[  2611.908] (II) modesetting(G0):    004c544e3137334b543032380a20002e
[  2611.908] (II) modesetting(G0): Printing probed modes for output LVDS-0
[  2611.908] (II) modesetting(G0): Modeline "1600x900"x60.1  107.84  1600 1648 1680 1888  900 902 908 950 -hsync -vsync (57.1 kHz eP)
[  2611.908] (II) modesetting(G0): Modeline "1024x768"x120.1  133.47  1024 1100 1212 1400  768 768 770 794 doublescan -hsync +vsync (95.3 kHz d)
[  2611.908] (II) modesetting(G0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz d)
[  2611.908] (II) modesetting(G0): Modeline "960x720"x120.0  117.00  960 1024 1128 1300  720 720 722 750 doublescan -hsync +vsync (90.0 kHz d)
[  2611.908] (II) modesetting(G0): Modeline "928x696"x120.1  109.15  928 976 1088 1264  696 696 698 719 doublescan -hsync +vsync (86.4 kHz d)
[  2611.908] (II) modesetting(G0): Modeline "896x672"x120.0  102.40  896 960 1060 1224  672 672 674 697 doublescan -hsync +vsync (83.7 kHz d)
[  2611.908] (II) modesetting(G0): Modeline "800x600"x120.0   81.00  800 832 928 1080  600 600 602 625 doublescan +hsync +vsync (75.0 kHz d)
[  2611.908] (II) modesetting(G0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz d)
[  2611.908] (II) modesetting(G0): Modeline "800x600"x56.2   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz d)
[  2611.908] (II) modesetting(G0): Modeline "700x525"x120.0   61.00  700 744 820 940  525 526 532 541 doublescan +hsync +vsync (64.9 kHz d)
[  2611.908] (II) modesetting(G0): Modeline "640x512"x120.0   54.00  640 664 720 844  512 512 514 533 doublescan +hsync +vsync (64.0 kHz d)
[  2611.908] (II) modesetting(G0): Modeline "640x480"x120.0   54.00  640 688 744 900  480 480 482 500 doublescan +hsync +vsync (60.0 kHz d)
[  2611.908] (II) modesetting(G0): Modeline "640x480"x59.9   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz d)
[  2611.908] (II) modesetting(G0): Modeline "512x384"x120.0   32.50  512 524 592 672  384 385 388 403 doublescan -hsync -vsync (48.4 kHz d)
[  2611.908] (II) modesetting(G0): Modeline "400x300"x120.6   20.00  400 420 484 528  300 300 302 314 doublescan +hsync +vsync (37.9 kHz d)
[  2611.908] (II) modesetting(G0): Modeline "400x300"x112.7   18.00  400 412 448 512  300 300 301 312 doublescan +hsync +vsync (35.2 kHz d)
[  2611.908] (II) modesetting(G0): Modeline "320x240"x120.1   12.59  320 328 376 400  240 245 246 262 doublescan -hsync -vsync (31.5 kHz d)
[  2611.909] (II) modesetting(G0): EDID for output VGA-0
[  2611.910] (II) modesetting(G0): EDID for output HDMI-0
[  2611.910] (II) modesetting(G0): EDID for output DisplayPort-0
[  2611.910] (II) modesetting(G0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[  2611.910] (==) modesetting(G0): DPI set to (96, 96)
[  2611.910] (II) Loading sub module "fb"
[  2611.910] (II) LoadModule: "fb"
[  2611.910] (II) Loading /usr/lib64/xorg/modules/libfb.so
[  2611.910] (II) Module fb: vendor="X.Org Foundation"
[  2611.910]    compiled for 1.14.3, module version = 1.0.0
[  2611.910]    ABI class: X.Org ANSI C Emulation, version 0.4
[  2611.910] (II) Loading sub module "shadow"
[  2611.910] (II) LoadModule: "shadow"
[  2611.910] (II) Loading /usr/lib64/xorg/modules/libshadow.so
[  2611.910] (II) Module shadow: vendor="X.Org Foundation"
[  2611.910]    compiled for 1.14.3, module version = 1.1.0
[  2611.910]    ABI class: X.Org ANSI C Emulation, version 0.4
[  2611.910] (--) Depth 24 pixmap format is 32 bpp
[  2611.910] (==) modesetting(G0): Backing store disabled
[  2611.910] (==) modesetting(G0): Silken mouse enabled
[  2611.910] (II) modesetting(G0): RandR 1.2 enabled, ignore the following RandR disabled message.
[  2611.910] (==) modesetting(G0): DPMS enabled
[  2612.510] (II) NVIDIA: Using 3072.00 MB of virtual memory for indirect memory
[  2612.510] (II) NVIDIA:     access.
[  2612.515] (II) NVIDIA(0): Setting mode "CRT-0:nvidia-auto-select"
[  2612.554] Loading extension NV-GLX
[  2612.569] (==) NVIDIA(0): Disabling shared memory pixmaps
[  2612.569] (==) NVIDIA(0): Backing store disabled
[  2612.569] (==) NVIDIA(0): Silken mouse enabled
[  2612.569] (==) NVIDIA(0): DPMS enabled
[  2612.569] Loading extension NV-CONTROL
[  2612.570] Loading extension XINERAMA
[  2612.570] (II) Loading sub module "dri2"
[  2612.570] (II) LoadModule: "dri2"
[  2612.570] (II) Module "dri2" already built-in
[  2612.570] (II) NVIDIA(0): [DRI2] Setup complete
[  2612.570] (II) NVIDIA(0): [DRI2]   VDPAU driver: nvidia
[  2612.570] (--) RandR disabled
[  2612.574] (II) Initializing extension GLX
[  2612.575] (II) modesetting(G0): Damage tracking initialized
[  2612.599] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[  2612.599] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[  2612.599] (**) Power Button: Applying InputClass "system-keyboard"
[  2612.599] (**) Power Button: Applying InputClass "keyboard-all"
[  2612.599] (II) LoadModule: "evdev"
[  2612.599] (II) Loading /usr/lib64/xorg/modules/input/evdev_drv.so
[  2612.600] (II) Module evdev: vendor="X.Org Foundation"
[  2612.600]    compiled for 1.14.3, module version = 2.8.1
[  2612.600]    Module class: X.Org XInput Driver
[  2612.600]    ABI class: X.Org XInput driver, version 19.1
[  2612.600] (II) Using input driver 'evdev' for 'Power Button'
[  2612.600] (**) Power Button: always reports core events
[  2612.600] (**) evdev: Power Button: Device: "/dev/input/event2"
[  2612.600] (--) evdev: Power Button: Vendor 0 Product 0x1
[  2612.600] (--) evdev: Power Button: Found keys
[  2612.600] (II) evdev: Power Button: Configuring as keyboard
[  2612.600] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input2/event2"
[  2612.600] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[  2612.600] (**) Option "xkb_rules" "evdev"
[  2612.600] (**) Option "xkb_model" "pc105"
[  2612.600] (**) Option "xkb_layout" "de"
[  2612.600] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[  2612.615] (II) config/udev: Adding input device Video Bus (/dev/input/event4)
[  2612.615] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[  2612.615] (**) Video Bus: Applying InputClass "system-keyboard"
[  2612.615] (**) Video Bus: Applying InputClass "keyboard-all"
[  2612.615] (II) Using input driver 'evdev' for 'Video Bus'
[  2612.615] (**) Video Bus: always reports core events
[  2612.615] (**) evdev: Video Bus: Device: "/dev/input/event4"
[  2612.615] (--) evdev: Video Bus: Vendor 0 Product 0x6
[  2612.615] (--) evdev: Video Bus: Found keys
[  2612.615] (II) evdev: Video Bus: Configuring as keyboard
[  2612.615] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:01/input/input4/event4"
[  2612.616] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[  2612.616] (**) Option "xkb_rules" "evdev"
[  2612.616] (**) Option "xkb_model" "pc105"
[  2612.616] (**) Option "xkb_layout" "de"
[  2612.616] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[  2612.616] (II) config/udev: Adding input device Video Bus (/dev/input/event3)
[  2612.616] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[  2612.616] (**) Video Bus: Applying InputClass "system-keyboard"
[  2612.616] (**) Video Bus: Applying InputClass "keyboard-all"
[  2612.616] (II) Using input driver 'evdev' for 'Video Bus'
[  2612.616] (**) Video Bus: always reports core events
[  2612.616] (**) evdev: Video Bus: Device: "/dev/input/event3"
[  2612.616] (--) evdev: Video Bus: Vendor 0 Product 0x6
[  2612.616] (--) evdev: Video Bus: Found keys
[  2612.616] (II) evdev: Video Bus: Configuring as keyboard
[  2612.616] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/device:2c/LNXVIDEO:00/input/input3/event3"
[  2612.616] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 8)
[  2612.616] (**) Option "xkb_rules" "evdev"
[  2612.616] (**) Option "xkb_model" "pc105"
[  2612.616] (**) Option "xkb_layout" "de"
[  2612.616] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[  2612.616] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[  2612.616] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[  2612.617] (**) Power Button: Applying InputClass "system-keyboard"
[  2612.617] (**) Power Button: Applying InputClass "keyboard-all"
[  2612.617] (II) Using input driver 'evdev' for 'Power Button'
[  2612.617] (**) Power Button: always reports core events
[  2612.617] (**) evdev: Power Button: Device: "/dev/input/event1"
[  2612.617] (--) evdev: Power Button: Vendor 0 Product 0x1
[  2612.617] (--) evdev: Power Button: Found keys
[  2612.617] (II) evdev: Power Button: Configuring as keyboard
[  2612.617] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1/event1"
[  2612.617] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 9)
[  2612.617] (**) Option "xkb_rules" "evdev"
[  2612.617] (**) Option "xkb_model" "pc105"
[  2612.617] (**) Option "xkb_layout" "de"
[  2612.617] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[  2612.617] (II) config/udev: Adding input device Lid Switch (/dev/input/event0)
[  2612.617] (II) No input driver specified, ignoring this device.
[  2612.617] (II) This device may have been added with another device file.
[  2612.617] (II) config/udev: Adding drm device (/dev/dri/card1)
[  2612.617] (II) config/udev: Adding drm device (/dev/dri/card0)
[  2612.617] (II) config/udev: Adding input device PIXART USB OPTICAL MOUSE (/dev/input/event6)
[  2612.618] (**) PIXART USB OPTICAL MOUSE: Applying InputClass "evdev pointer catchall"
[  2612.618] (II) Using input driver 'evdev' for 'PIXART USB OPTICAL MOUSE'
[  2612.618] (**) PIXART USB OPTICAL MOUSE: always reports core events
[  2612.618] (**) evdev: PIXART USB OPTICAL MOUSE: Device: "/dev/input/event6"
[  2612.618] (--) evdev: PIXART USB OPTICAL MOUSE: Vendor 0x93a Product 0x2510
[  2612.618] (--) evdev: PIXART USB OPTICAL MOUSE: Found 3 mouse buttons
[  2612.618] (--) evdev: PIXART USB OPTICAL MOUSE: Found scroll wheel(s)
[  2612.618] (--) evdev: PIXART USB OPTICAL MOUSE: Found relative axes
[  2612.618] (--) evdev: PIXART USB OPTICAL MOUSE: Found x and y relative axes
[  2612.618] (II) evdev: PIXART USB OPTICAL MOUSE: Configuring as mouse
[  2612.618] (II) evdev: PIXART USB OPTICAL MOUSE: Adding scrollwheel support
[  2612.618] (**) evdev: PIXART USB OPTICAL MOUSE: YAxisMapping: buttons 4 and 5
[  2612.618] (**) evdev: PIXART USB OPTICAL MOUSE: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[  2612.618] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.5/2-1.5:1.0/input/input14/event6"
[  2612.618] (II) XINPUT: Adding extended input device "PIXART USB OPTICAL MOUSE" (type: MOUSE, id 10)
[  2612.618] (II) evdev: PIXART USB OPTICAL MOUSE: initialized for relative axes.
[  2612.618] (**) PIXART USB OPTICAL MOUSE: (accel) keeping acceleration scheme 1
[  2612.618] (**) PIXART USB OPTICAL MOUSE: (accel) acceleration profile 0
[  2612.618] (**) PIXART USB OPTICAL MOUSE: (accel) acceleration factor: 2.000
[  2612.618] (**) PIXART USB OPTICAL MOUSE: (accel) acceleration threshold: 4
[  2612.618] (II) config/udev: Adding input device PIXART USB OPTICAL MOUSE (/dev/input/mouse0)
[  2612.618] (II) No input driver specified, ignoring this device.
[  2612.618] (II) This device may have been added with another device file.
[  2612.618] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event5)
[  2612.618] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[  2612.618] (**) AT Translated Set 2 keyboard: Applying InputClass "system-keyboard"
[  2612.618] (**) AT Translated Set 2 keyboard: Applying InputClass "keyboard-all"
[  2612.618] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[  2612.618] (**) AT Translated Set 2 keyboard: always reports core events
[  2612.618] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event5"
[  2612.618] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[  2612.618] (--) evdev: AT Translated Set 2 keyboard: Found keys
[  2612.618] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[  2612.619] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input5/event5"
[  2612.619] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 11)
[  2612.619] (**) Option "xkb_rules" "evdev"
[  2612.619] (**) Option "xkb_model" "pc105"
[  2612.619] (**) Option "xkb_layout" "de"
[  2612.619] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[  2612.619] (II) config/udev: Adding input device PS/2 Logitech Wheel Mouse (/dev/input/event7)
[  2612.619] (**) PS/2 Logitech Wheel Mouse: Applying InputClass "evdev pointer catchall"
[  2612.619] (II) Using input driver 'evdev' for 'PS/2 Logitech Wheel Mouse'
[  2612.619] (**) PS/2 Logitech Wheel Mouse: always reports core events
[  2612.619] (**) evdev: PS/2 Logitech Wheel Mouse: Device: "/dev/input/event7"
[  2612.619] (--) evdev: PS/2 Logitech Wheel Mouse: Vendor 0x2 Product 0x1
[  2612.619] (--) evdev: PS/2 Logitech Wheel Mouse: Found 3 mouse buttons
[  2612.619] (--) evdev: PS/2 Logitech Wheel Mouse: Found relative axes
[  2612.619] (--) evdev: PS/2 Logitech Wheel Mouse: Found x and y relative axes
[  2612.619] (II) evdev: PS/2 Logitech Wheel Mouse: Configuring as mouse
[  2612.619] (**) evdev: PS/2 Logitech Wheel Mouse: YAxisMapping: buttons 4 and 5
[  2612.619] (**) evdev: PS/2 Logitech Wheel Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[  2612.619] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input7/event7"
[  2612.619] (II) XINPUT: Adding extended input device "PS/2 Logitech Wheel Mouse" (type: MOUSE, id 12)
[  2612.619] (II) evdev: PS/2 Logitech Wheel Mouse: initialized for relative axes.
[  2612.619] (**) PS/2 Logitech Wheel Mouse: (accel) keeping acceleration scheme 1
[  2612.619] (**) PS/2 Logitech Wheel Mouse: (accel) acceleration profile 0
[  2612.619] (**) PS/2 Logitech Wheel Mouse: (accel) acceleration factor: 2.000
[  2612.619] (**) PS/2 Logitech Wheel Mouse: (accel) acceleration threshold: 4
[  2612.619] (II) config/udev: Adding input device PS/2 Logitech Wheel Mouse (/dev/input/mouse1)
[  2612.619] (II) No input driver specified, ignoring this device.
[  2612.619] (II) This device may have been added with another device file.
[  2612.620] (II) config/udev: Adding input device PC Speaker (/dev/input/event8)
[  2612.620] (II) No input driver specified, ignoring this device.
[  2612.620] (II) This device may have been added with another device file.
[  2613.101] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
[  2613.102] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[  2613.102] (**) NVIDIA(0):     device CRT-0 (Using EDID frequencies has been enabled on
[  2613.102] (**) NVIDIA(0):     all display devices.)
[  2613.252] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
[  2613.252] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[  2613.252] (**) NVIDIA(0):     device CRT-0 (Using EDID frequencies has been enabled on
[  2613.252] (**) NVIDIA(0):     all display devices.)
[  2613.386] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
[  2613.386] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[  2613.386] (**) NVIDIA(0):     device CRT-0 (Using EDID frequencies has been enabled on
[  2613.386] (**) NVIDIA(0):     all display devices.)
[  2622.803] (II) NVIDIA(0): Setting mode "CRT-0:nvidia-auto-select"
[  2622.856] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
[  2622.856] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[  2622.856] (**) NVIDIA(0):     device CRT-0 (Using EDID frequencies has been enabled on
[  2622.856] (**) NVIDIA(0):     all display devices.)
[  2623.450] (II) modesetting(G0): EDID vendor "SEC", prod id 13901
[  2623.450] (II) modesetting(G0): Printing DDC gathered Modelines:
[  2623.450] (II) modesetting(G0): Modeline "1600x900"x0.0  107.84  1600 1648 1680 1888  900 902 908 950 -hsync -vsync (57.1 kHz eP)
[  2623.458] setversion 1.4 failed


I am using the following kernel:

Code:

# uname -a
Linux pandora 3.10.17-gentoo #2 SMP Fri Nov 29 13:31:02 CET 2013 x86_64 Intel(R) Core(TM) i5-2450M CPU @ 2.50GHz GenuineIntel GNU/Linux


With the following kernel config:

[code:1:1885929ca4]
#
# Automatically generated file; DO NOT EDIT.
# Linux/x86 3.10.17-gentoo Kernel Configuration
#

#
# Gentoo Linux
#
CONFIG_GENTOO_LINUX=y
CONFIG_GENTOO_LINUX_UDEV=y

#
# Support for init systems, system and service managers
#
CONFIG_GENTOO_LINUX_INIT_SCRIPT=y
CONFIG_GENTOO_LINUX_INIT_SYSTEMD=y
CONFIG_64BIT=y
CONFIG_X86_64=y
CONFIG_X86=y
CONFIG_INSTRUCTION_DECODER=y
CONFIG_OUTPUT_FORMAT="elf64-x86-64"
CONFIG_ARCH_DEFCONFIG="arch/x86/configs/x86_64_defconfig"
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_MMU=y
CONFIG_NEED_DMA_MAP_STATE=y
CONFIG_NEED_SG_DMA_LENGTH=y
CONFIG_GENERIC_ISA_DMA=y
CONFIG_GENERIC_BUG=y
CONFIG_GENERIC_BUG_RELATIVE_POINTERS=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_ARCH_HAS_CPU_RELAX=y
CONFIG_ARCH_HAS_CACHE_LINE_SIZE=y
CONFIG_ARCH_HAS_CPU_AUTOPROBE=y
CONFIG_HAVE_SETUP_PER_CPU_AREA=y
CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK=y
CONFIG_NEED_PER_CPU_PAGE_FIRST_CHUNK=y
CONFIG_ARCH_HIBERNATION_POSSIBLE=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
CONFIG_ZONE_DMA32=y
CONFIG_AUDIT_ARCH=y
CONFIG_ARCH_SUPPORTS_OPTIMIZED_INLINING=y
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_X86_64_SMP=y
CONFIG_X86_HT=y
CONFIG_ARCH_HWEIGHT_CFLAGS="-fcall-saved-rdi -fcall-saved-rsi -fcall-saved-rdx -fcall-saved-rcx -fcall-saved-r8 -fcall-saved-r9 -fcall-saved-r10 -fcall-saved-r11"
CONFIG_ARCH_CPU_PROBE_RELEASE=y
CONFIG_ARCH_SUPPORTS_UPROBES=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
CONFIG_IRQ_WORK=y
CONFIG_BUILDTIME_EXTABLE_SORT=y

#
# General setup
#
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_CROSS_COMPILE=""
CONFIG_LOCALVERSION=""
# CONFIG_LOCALVERSION_AUTO is not set
CONFIG_HAVE_KERNEL_GZIP=y
CONFIG_HAVE_KERNEL_BZIP2=y
CONFIG_HAVE_KERNEL_LZMA=y
CONFIG_HAVE_KERNEL_XZ=y
CONFIG_HAVE_KERNEL_LZO=y
CONFIG_KERNEL_GZIP=y
# CONFIG_KERNEL_BZIP2 is not set
# CONFIG_KERNEL_LZMA is not set
# CONFIG_KERNEL_XZ is not set
# CONFIG_KERNEL_LZO is not set
CONFIG_DEFAULT_HOSTNAME="(none)"
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
CONFIG_POSIX_MQUEUE_SYSCTL=y
CONFIG_FHANDLE=y
CONFIG_AUDIT=y
CONFIG_AUDITSYSCALL=y
CONFIG_AUDIT_WATCH=y
CONFIG_AUDIT_TREE=y
# CONFIG_AUDIT_LOGINUID_IMMUTABLE is not set
CONFIG_HAVE_GENERIC_HARDIRQS=y

#
# IRQ subsystem
#
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_GENERIC_IRQ_SHOW=y
CONFIG_GENERIC_PENDING_IRQ=y
CONFIG_IRQ_FORCED_THREADING=y
CONFIG_SPARSE_IRQ=y
CONFIG_CLOCKSOURCE_WATCHDOG=y
CONFIG_ARCH_CLOCKSOURCE_DATA=y
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
CONFIG_GENERIC_CLOCKEVENTS_MIN_ADJUST=y
CONFIG_GENERIC_CMOS_UPDATE=y

#
# Timers subsystem
#
CONFIG_TICK_ONESHOT=y
CONFIG_NO_HZ_COMMON=y
# CONFIG_HZ_PERIODIC is not set
CONFIG_NO_HZ_IDLE=y
# CONFIG_NO_HZ_FULL is not set
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y

#
# CPU/Task time and stats accounting
#
CONFIG_TICK_CPU_ACCOUNTING=y
# CONFIG_VIRT_CPU_ACCOUNTING_GEN is not set
# CONFIG_IRQ_TIME_ACCOUNTING is not set
CONFIG_BSD_PROCESS_ACCT=y
CONFIG_BSD_PROCESS_ACCT_V3=y
CONFIG_TASKSTATS=y
CONFIG_TASK_DELAY_ACCT=y
# CONFIG_TASK_XACCT is not set

#
# RCU Subsystem
#
CONFIG_TREE_RCU=y
# CONFIG_PREEMPT_RCU is not set
CONFIG_RCU_STALL_COMMON=y
# CONFIG_RCU_USER_QS is not set
CONFIG_RCU_FANOUT=64
CONFIG_RCU_FANOUT_LEAF=16
# CONFIG_RCU_FANOUT_EXACT is not set
# CONFIG_RCU_FAST_NO_HZ is not set
# CONFIG_TREE_RCU_TRACE is not set
# CONFIG_RCU_NOCB_CPU is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=15
CONFIG_HAVE_UNSTABLE_SCHED_CLOCK=y
CONFIG_ARCH_SUPPORTS_NUMA_BALANCING=y
CONFIG_ARCH_WANTS_PROT_NUMA_PROT_NONE=y
CONFIG_CGROUPS=y
# CONFIG_CGROUP_DEBUG is not set
# CONFIG_CGROUP_FREEZER is not set
# CONFIG_CGROUP_DEVICE is not set
CONFIG_CPUSETS=y
CONFIG_PROC_PID_CPUSET=y
CONFIG_CGROUP_CPUACCT=y
# CONFIG_RESOURCE_COUNTERS is not set
# CONFIG_CGROUP_PERF is not set
# CONFIG_CGROUP_SCHED is not set
# CONFIG_BLK_CGROUP is not set
# CONFIG_CHECKPOINT_RESTORE is not set
CONFIG_NAMESPACES=y
CONFIG_UTS_NS=y
CONFIG_IPC_NS=y
CONFIG_PID_NS=y
CONFIG_NET_NS=y
# CONFIG_SCHED_AUTOGROUP is not set
# CONFIG_SYSFS_DEPRECATED is not set
# CONFIG_RELAY is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
CONFIG_RD_GZIP=y
CONFIG_RD_BZIP2=y
CONFIG_RD_LZMA=y
CONFIG_RD_XZ=y
CONFIG_RD_LZO=y
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_SYSCTL=y
CONFIG_ANON_INODES=y
CONFIG_HAVE_UID16=y
CONFIG_SYSCTL_EXCEPTION_TRACE=y
CONFIG_HOTPLUG=y
CONFIG_HAVE_PCSPKR_PLATFORM=y
# CONFIG_EXPERT is not set
CONFIG_UID16=y
# CONFIG_SYSCTL_SYSCALL is not set
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_PCSPKR_PLATFORM=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
CONFIG_PCI_QUIRKS=y
# CONFIG_EMBEDDED is not set
CONFIG_HAVE_PERF_EVENTS=y

#
# Kernel Performance Events And Counters
#
CONFIG_PERF_EVENTS=y
# CONFIG_DEBUG_PERF_USE_VMALLOC is not set
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_COMPAT_BRK=y
CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_PROFILING is not set
CONFIG_HAVE_OPROFILE=y
CONFIG_OPROFILE_NMI_TIMER=y
# CONFIG_KPROBES is not set
# CONFIG_JUMP_LABEL is not set
# CONFIG_HAVE_64BIT_ALIGNED_ACCESS is not set
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_ARCH_USE_BUILTIN_BSWAP=y
CONFIG_USER_RETURN_NOTIFIER=y
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_OPTPROBES=y
CONFIG_HAVE_KPROBES_ON_FTRACE=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_DMA_ATTRS=y
CONFIG_USE_GENERIC_SMP_HELPERS=y
CONFIG_GENERIC_SMP_IDLE_THREAD=y
CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
CONFIG_HAVE_DMA_API_DEBUG=y
CONFIG_HAVE_HW_BREAKPOINT=y
CONFIG_HAVE_MIXED_BREAKPOINTS_REGS=y
CONFIG_HAVE_USER_RETURN_NOTIFIER=y
CONFIG_HAVE_PERF_EVENTS_NMI=y
CONFIG_HAVE_PERF_REGS=y
CONFIG_HAVE_PERF_USER_STACK_DUMP=y
CONFIG_HAVE_ARCH_JUMP_LABEL=y
CONFIG_ARCH_HAVE_NMI_SAFE_CMPXCHG=y
CONFIG_HAVE_CMPXCHG_LOCAL=y
CONFIG_HAVE_CMPXCHG_DOUBLE=y
CONFIG_ARCH_WANT_COMPAT_IPC_PARSE_VERSION=y
CONFIG_ARCH_WANT_OLD_COMPAT_IPC=y
CONFIG_HAVE_ARCH_SECCOMP_FILTER=y
CONFIG_SECCOMP_FILTER=y
CONFIG_HAVE_CONTEXT_TRACKING=y
CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y
CONFIG_HAVE_ARCH_TRANSPARENT_HUGEPAGE=y
CONFIG_MODULES_USE_ELF_RELA=y
CONFIG_OLD_SIGSUSPEND3=y
CONFIG_COMPAT_OLD_SIGACTION=y

#
# GCOV-based kernel profiling
#
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
CONFIG_MODVERSIONS=y
# CONFIG_MODULE_SRCVERSION_ALL is not set
# CONFIG_MODULE_SIG is not set
CONFIG_STOP_MACHINE=y
CONFIG_BLOCK=y
CONFIG_BLK_DEV_BSG=y
CONFIG_BLK_DEV_BSGLIB=y
# CONFIG_BLK_DEV_INTEGRITY is not set

#
# Partition Types
#
CONFIG_PARTITION_ADVANCED=y
# CONFIG_ACORN_PARTITION is not set
# CONFIG_OSF_PARTITION is not set
# CONFIG_AMIGA_PARTITION is not set
# CONFIG_ATARI_PARTITION is not set
CONFIG_MAC_PARTITION=y
CONFIG_MSDOS_PARTITION=y
CONFIG_BSD_DISKLABEL=y
CONFIG_MINIX_SUBPARTITION=y
CONFIG_SOLARIS_X86_PARTITION=y
CONFIG_UNIXWARE_DISKLABEL=y
CONFIG_LDM_PARTITION=y
# CONFIG_LDM_DEBUG is not set
# CONFIG_SGI_PARTITION is not set
# CONFIG_ULTRIX_PARTITION is not set
# CONFIG_SUN_PARTITION is not set
CONFIG_KARMA_PARTITION=y
CONFIG_EFI_PARTITION=y
CONFIG_SYSV68_PARTITION=y
CONFIG_BLOCK_COMPAT=y

#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
# CONFIG_DEFAULT_DEADLINE is not set
CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="cfq"
CONFIG_PREEMPT_NOTIFIERS=y
CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
CONFIG_INLINE_READ_UNLOCK=y
CONFIG_INLINE_READ_UNLOCK_IRQ=y
CONFIG_INLINE_WRITE_UNLOCK=y
CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
CONFIG_FREEZER=y

#
# Processor type and features
#
CONFIG_ZONE_DMA=y
CONFIG_SMP=y
CONFIG_X86_MPPARSE=y
CONFIG_X86_EXTENDED_PLATFORM=y
# CONFIG_X86_VSMP is not set
# CONFIG_X86_INTEL_LPSS is not set
CONFIG_X86_SUPPORTS_MEMORY_FAILURE=y
CONFIG_SCHED_OMIT_FRAME_POINTER=y
# CONFIG_HYPERVISOR_GUEST is not set
CONFIG_NO_BOOTMEM=y
# CONFIG_MEMTEST is not set
# CONFIG_MK8 is not set
# CONFIG_MPSC is not set
# CONFIG_MCORE2 is not set
# CONFIG_MATOM is not set
CONFIG_GENERIC_CPU=y
CONFIG_X86_INTERNODE_CACHE_SHIFT=6
CONFIG_X86_L1_CACHE_SHIFT=6
CONFIG_X86_TSC=y
CONFIG_X86_CMPXCHG64=y
CONFIG_X86_CMOV=y
CONFIG_X86_MINIMUM_CPU_FAMILY=64
CONFIG_X86_DEBUGCTLMSR=y
CONFIG_CPU_SUP_INTEL=y
CONFIG_CPU_SUP_AMD=y
CONFIG_CPU_SUP_CENTAUR=y
CONFIG_HPET_TIMER=y
CONFIG_HPET_EMULATE_RTC=y
CONFIG_DMI=y
CONFIG_GART_IOMMU=y
CONFIG_CALGARY_IOMMU=y
CONFIG_CALGARY_IOMMU_ENABLED_BY_DEFAULT=y
CONFIG_SWIOTLB=y
CONFIG_IOMMU_HELPER=y
# CONFIG_MAXSMP is not set
CONFIG_NR_CPUS=32
CONFIG_SCHED_SMT=y
CONFIG_SCHED_MC=y
CONFIG_PREEMPT_NONE=y
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
CONFIG_X86_LOCAL_APIC=y
CONFIG_X86_IO_APIC=y
# CONFIG_X86_REROUTE_FOR_BROKEN_BOOT_IRQS is not set
CONFIG_X86_MCE=y
CONFIG_X86_MCE_INTEL=y
CONFIG_X86_MCE_AMD=y
CONFIG_X86_MCE_THRESHOLD=y
# CONFIG_X86_MCE_INJECT is not set
CONFIG_X86_THERMAL_VECTOR=y
# CONFIG_I8K is not set
CONFIG_MICROCODE=y
CONFIG_MICROCODE_INTEL=y
# CONFIG_MICROCODE_AMD is not set
CONFIG_MICROCODE_OLD_INTERFACE=y
CONFIG_MICROCODE_INTEL_LIB=y
CONFIG_MICROCODE_INTEL_EARLY=y
CONFIG_MICROCODE_EARLY=y
CONFIG_X86_MSR=y
CONFIG_X86_CPUID=y
CONFIG_ARCH_PHYS_ADDR_T_64BIT=y
CONFIG_ARCH_DMA_ADDR_T_64BIT=y
CONFIG_DIRECT_GBPAGES=y
# CONFIG_NUMA is not set
CONFIG_ARCH_SPARSEMEM_ENABLE=y
CONFIG_ARCH_SPARSEMEM_DEFAULT=y
CONFIG_ARCH_SELECT_MEMORY_MODEL=y
CONFIG_ARCH_PROC_KCORE_TEXT=y
CONFIG_ILLEGAL_POINTER_VALUE=0xdead000000000000
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_SPARSEMEM_MANUAL=y
CONFIG_SPARSEMEM=y
CONFIG_HAVE_MEMORY_PRESENT=y
CONFIG_SPARSEMEM_EXTREME=y
CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y
CONFIG_SPARSEMEM_ALLOC_MEM_MAP_TOGETHER=y
CONFIG_SPARSEMEM_VMEMMAP=y
CONFIG_HAVE_MEMBLOCK=y
CONFIG_HAVE_MEMBLOCK_NODE_MAP=y
CONFIG_ARCH_DISCARD_MEMBLOCK=y
# CONFIG_HAVE_BOOTMEM_INFO_NODE is not set
# CONFIG_MEMORY_HOTPLUG is not set
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_COMPACTION is not set
CONFIG_PHYS_ADDR_T_64BIT=y
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
CONFIG_MMU_NOTIFIER=y
# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_ARCH_SUPPORTS_MEMORY_FAILURE=y
# CONFIG_MEMORY_FAILURE is not set
# CONFIG_TRANSPARENT_HUGEPAGE is not set
CONFIG_CROSS_MEMORY_ATTACH=y
# CONFIG_CLEANCACHE is not set
# CONFIG_FRONTSWAP is not set
# CONFIG_X86_CHECK_BIOS_CORRUPTION is not set
CONFIG_X86_RESERVE_LOW=64
CONFIG_MTRR=y
CONFIG_MTRR_SANITIZER=y
CONFIG_MTRR_SANITIZER_ENABLE_DEFAULT=0
CONFIG_MTRR_SANITIZER_SPARE_REG_NR_DEFAULT=1
CONFIG_X86_PAT=y
CONFIG_ARCH_USES_PG_UNCACHED=y
CONFIG_ARCH_RANDOM=y
CONFIG_X86_SMAP=y
CONFIG_EFI=y
# CONFIG_EFI_STUB is not set
CONFIG_SECCOMP=y
# CONFIG_CC_STACKPROTECTOR is not set
CONFIG_HZ_100=y
# CONFIG_HZ_250 is not set
# CONFIG_HZ_300 is not set
# CONFIG_HZ_1000 is not set
CONFIG_HZ=100
CONFIG_SCHED_HRTICK=y
CONFIG_KEXEC=y
CONFIG_CRASH_DUMP=y
# CONFIG_KEXEC_JUMP is not set
CONFIG_PHYSICAL_START=0x200000
CONFIG_RELOCATABLE=y
CONFIG_PHYSICAL_ALIGN=0x1000000
CONFIG_HOTPLUG_CPU=y
# CONFIG_BOOTPARAM_HOTPLUG_CPU0 is not set
# CONFIG_DEBUG_HOTPLUG_CPU0 is not set
CONFIG_COMPAT_VDSO=y
# CONFIG_CMDLINE_BOOL is not set
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y

#
# Power management and ACPI options
#
CONFIG_ARCH_HIBERNATION_HEADER=y
CONFIG_SUSPEND=y
CONFIG_SUSPEND_FREEZER=y
CONFIG_HIBERNATE_CALLBACKS=y
CONFIG_HIBERNATION=y
CONFIG_PM_STD_PARTITION=""
CONFIG_PM_SLEEP=y
CONFIG_PM_SLEEP_SMP=y
# CONFIG_PM_AUTOSLEEP is not set
# CONFIG_PM_WAKELOCKS is not set
CONFIG_PM_RUNTIME=y
CONFIG_PM=y
# CONFIG_PM_DEBUG is not set
CONFIG_ACPI=y
CONFIG_ACPI_SLEEP=y
CONFIG_ACPI_PROCFS=y
CONFIG_ACPI_PROCFS_POWER=y
# CONFIG_ACPI_EC_DEBUGFS is not set
CONFIG_ACPI_PROC_EVENT=y
CONFIG_ACPI_AC=m
CONFIG_ACPI_BATTERY=m
CONFIG_ACPI_BUTTON=y
CONFIG_ACPI_VIDEO=y
CONFIG_ACPI_FAN=m
# CONFIG_ACPI_DOCK is not set
CONFIG_ACPI_I2C=y
CONFIG_ACPI_PROCESSOR=m
CONFIG_ACPI_HOTPLUG_CPU=y
# CONFIG_ACPI_PROCESSOR_AGGREGATOR is not set
CONFIG_ACPI_THERMAL=m
# CONFIG_ACPI_CUSTOM_DSDT is not set
# CONFIG_ACPI_INITRD_TABLE_OVERRIDE is not set
CONFIG_ACPI_BLACKLIST_YEAR=0
# CONFIG_ACPI_DEBUG is not set
# CONFIG_ACPI_PCI_SLOT is not set
CONFIG_X86_PM_TIMER=y
CONFIG_ACPI_CONTAINER=y
# CONFIG_ACPI_SBS is not set
# CONFIG_ACPI_HED is not set
# CONFIG_ACPI_BGRT is not set
# CONFIG_ACPI_APEI is not set
# CONFIG_SFI is not set

#
# CPU Frequency scaling
#
CONFIG_CPU_FREQ=y
CONFIG_CPU_FREQ_TABLE=m
CONFIG_CPU_FREQ_GOV_COMMON=y
CONFIG_CPU_FREQ_STAT=m
# CONFIG_CPU_FREQ_STAT_DETAILS is not set
CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
CONFIG_CPU_FREQ_GOV_POWERSAVE=m
CONFIG_CPU_FREQ_GOV_USERSPACE=m
CONFIG_CPU_FREQ_GOV_ONDEMAND=m
CONFIG_CPU_FREQ_GOV_CONSERVATIVE=m

#
# x86 CPU frequency scaling drivers
#
# CONFIG_X86_INTEL_PSTATE is not set
# CONFIG_X86_PCC_CPUFREQ is not set
CONFIG_X86_ACPI_CPUFREQ=m
CONFIG_X86_ACPI_CPUFREQ_CPB=y
CONFIG_X86_POWERNOW_K8=m
# CONFIG_X86_AMD_FREQ_SENSITIVITY is not set
CONFIG_X86_SPEEDSTEP_CENTRINO=m
CONFIG_X86_P4_CLOCKMOD=m

#
# shared options
#
CONFIG_X86_SPEEDSTEP_LIB=m
CONFIG_CPU_IDLE=y
# CONFIG_CPU_IDLE_MULTIPLE_DRIVERS is not set
CONFIG_CPU_IDLE_GOV_LADDER=y
CONFIG_CPU_IDLE_GOV_MENU=y
# CONFIG_ARCH_NEEDS_CPU_IDLE_COUPLED is not set
# CONFIG_INTEL_IDLE is not set

#
# Memory power savings
#
# CONFIG_I7300_IDLE is not set

#
# Bus options (PCI etc.)
#
CONFIG_PCI=y
CONFIG_PCI_DIRECT=y
CONFIG_PCI_MMCONFIG=y
CONFIG_PCI_DOMAINS=y
CONFIG_PCIEPORTBUS=y
CONFIG_PCIEAER=y
# CONFIG_PCIE_ECRC is not set
# CONFIG_PCIEAER_INJECT is not set
CONFIG_PCIEASPM=y
# CONFIG_PCIEASPM_DEBUG is not set
CONFIG_PCIEASPM_DEFAULT=y
# CONFIG_PCIEASPM_POWERSAVE is not set
# CONFIG_PCIEASPM_PERFORMANCE is not set
CONFIG_PCIE_PME=y
CONFIG_ARCH_SUPPORTS_MSI=y
CONFIG_PCI_MSI=y
# CONFIG_PCI_DEBUG is not set
# CONFIG_PCI_REALLOC_ENABLE_AUTO is not set
# CONFIG_PCI_STUB is not set
CONFIG_HT_IRQ=y
# CONFIG_PCI_IOV is not set
# CONFIG_PCI_PRI is not set
# CONFIG_PCI_PASID is not set
CONFIG_PCI_IOAPIC=y
CONFIG_PCI_LABEL=y
CONFIG_ISA_DMA_API=y
CONFIG_AMD_NB=y
CONFIG_PCCARD=y
CONFIG_PCMCIA=y
CONFIG_PCMCIA_LOAD_CIS=y
CONFIG_CARDBUS=y

#
# PC-card bridges
#
CONFIG_YENTA=y
CONFIG_YENTA_O2=y
CONFIG_YENTA_RICOH=y
CONFIG_YENTA_TI=y
CONFIG_YENTA_ENE_TUNE=y
CONFIG_YENTA_TOSHIBA=y
CONFIG_PD6729=y
CONFIG_I82092=y
CONFIG_PCCARD_NONSTATIC=y
# CONFIG_HOTPLUG_PCI is not set
# CONFIG_RAPIDIO is not set

#
# Executable file formats / Emulations
#
CONFIG_BINFMT_ELF=y
CONFIG_COMPAT_BINFMT_ELF=y
CONFIG_ARCH_BINFMT_ELF_RANDOMIZE_PIE=y
# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
CONFIG_BINFMT_SCRIPT=y
# CONFIG_HAVE_AOUT is not set
CONFIG_BINFMT_MISC=y
CONFIG_COREDUMP=y
CONFIG_IA32_EMULATION=y
# CONFIG_IA32_AOUT is not set
# CONFIG_X86_X32 is not set
CONFIG_COMPAT=y
CONFIG_COMPAT_FOR_U64_ALIGNMENT=y
CONFIG_SYSVIPC_COMPAT=y
CONFIG_KEYS_COMPAT=y
CONFIG_HAVE_TEXT_POKE_SMP=y
CONFIG_X86_DEV_DMA_OPS=y
CONFIG_NET=y
CONFIG_COMPAT_NETLINK_MESSAGES=y

#
# Networking options
#
CONFIG_PACKET=y
# CONFIG_PACKET_DIAG is not set
CONFIG_UNIX=y
# CONFIG_UNIX_DIAG is not set
CONFIG_XFRM=y
CONFIG_XFRM_ALGO=m
CONFIG_XFRM_USER=m
# CONFIG_XFRM_SUB_POLICY is not set
# CONFIG_XFRM_MIGRATE is not set
# CONFIG_XFRM_STATISTICS is not set
CONFIG_XFRM_IPCOMP=m
CONFIG_NET_KEY=m
# CONFIG_NET_KEY_MIGRATE is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
CONFIG_IP_ADVANCED_ROUTER=y
# CONFIG_IP_FIB_TRIE_STATS is not set
CONFIG_IP_MULTIPLE_TABLES=y
CONFIG_IP_ROUTE_MULTIPATH=y
# CONFIG_IP_ROUTE_VERBOSE is not set
CONFIG_IP_ROUTE_CLASSID=y
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
# CONFIG_IP_PNP_BOOTP is not set
# CONFIG_IP_PNP_RARP is not set
CONFIG_NET_IPIP=m
# CONFIG_NET_IPGRE_DEMUX is not set
CONFIG_NET_IP_TUNNEL=m
CONFIG_IP_MROUTE=y
# CONFIG_IP_MROUTE_MULTIPLE_TABLES is not set
CONFIG_IP_PIMSM_V1=y
CONFIG_IP_PIMSM_V2=y
# CONFIG_ARPD is not set
CONFIG_SYN_COOKIES=y
# CONFIG_NET_IPVTI is not set
CONFIG_INET_AH=m
CONFIG_INET_ESP=m
CONFIG_INET_IPCOMP=m
CONFIG_INET_XFRM_TUNNEL=m
CONFIG_INET_TUNNEL=m
CONFIG_INET_XFRM_MODE_TRANSPORT=m
CONFIG_INET_XFRM_MODE_TUNNEL=m
CONFIG_INET_XFRM_MODE_BEET=m
CONFIG_INET_LRO=m
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
# CONFIG_INET_UDP_DIAG is not set
# CONFIG_TCP_CONG_ADVANCED is not set
CONFIG_TCP_CONG_CUBIC=y
CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_TCP_MD5SIG is not set
CONFIG_IPV6=y
CONFIG_IPV6_PRIVACY=y
CONFIG_IPV6_ROUTER_PREF=y
# CONFIG_IPV6_ROUTE_INFO is not set
# CONFIG_IPV6_OPTIMISTIC_DAD is not set
CONFIG_INET6_AH=m
CONFIG_INET6_ESP=m
CONFIG_INET6_IPCOMP=m
# CONFIG_IPV6_MIP6 is not set
CONFIG_INET6_XFRM_TUNNEL=m
CONFIG_INET6_TUNNEL=m
CONFIG_INET6_XFRM_MODE_TRANSPORT=m
CONFIG_INET6_XFRM_MODE_TUNNEL=m
CONFIG_INET6_XFRM_MODE_BEET=m
# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
CONFIG_IPV6_SIT=m
# CONFIG_IPV6_SIT_6RD is not set
CONFIG_IPV6_NDISC_NODETYPE=y
CONFIG_IPV6_TUNNEL=m
# CONFIG_IPV6_GRE is not set
# CONFIG_IPV6_MULTIPLE_TABLES is not set
# CONFIG_IPV6_MROUTE is not set
CONFIG_NETWORK_SECMARK=y
# CONFIG_NETWORK_PHY_TIMESTAMPING is not set
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
CONFIG_NETFILTER_ADVANCED=y
CONFIG_BRIDGE_NETFILTER=y

#
# Core Netfilter Configuration
#
CONFIG_NETFILTER_NETLINK=m
# CONFIG_NETFILTER_NETLINK_ACCT is not set
CONFIG_NETFILTER_NETLINK_QUEUE=m
CONFIG_NETFILTER_NETLINK_LOG=m
CONFIG_NF_CONNTRACK=m
CONFIG_NF_CONNTRACK_MARK=y
CONFIG_NF_CONNTRACK_SECMARK=y
# CONFIG_NF_CONNTRACK_ZONES is not set
CONFIG_NF_CONNTRACK_PROCFS=y
CONFIG_NF_CONNTRACK_EVENTS=y
# CONFIG_NF_CONNTRACK_TIMEOUT is not set
# CONFIG_NF_CONNTRACK_TIMESTAMP is not set
# CONFIG_NF_CT_PROTO_DCCP is not set
CONFIG_NF_CT_PROTO_GRE=m
CONFIG_NF_CT_PROTO_SCTP=m
CONFIG_NF_CT_PROTO_UDPLITE=m
CONFIG_NF_CONNTRACK_AMANDA=m
CONFIG_NF_CONNTRACK_FTP=m
CONFIG_NF_CONNTRACK_H323=m
CONFIG_NF_CONNTRACK_IRC=m
CONFIG_NF_CONNTRACK_BROADCAST=m
CONFIG_NF_CONNTRACK_NETBIOS_NS=m
# CONFIG_NF_CONNTRACK_SNMP is not set
CONFIG_NF_CONNTRACK_PPTP=m
CONFIG_NF_CONNTRACK_SANE=m
CONFIG_NF_CONNTRACK_SIP=m
CONFIG_NF_CONNTRACK_TFTP=m
CONFIG_NF_CT_NETLINK=m
# CONFIG_NF_CT_NETLINK_TIMEOUT is not set
# CONFIG_NETFILTER_NETLINK_QUEUE_CT is not set
# CONFIG_NETFILTER_TPROXY is not set
CONFIG_NETFILTER_XTABLES=m

#
# Xtables combined modules
#
CONFIG_NETFILTER_XT_MARK=m
CONFIG_NETFILTER_XT_CONNMARK=m

#
# Xtables targets
#
# CONFIG_NETFILTER_XT_TARGET_AUDIT is not set
# CONFIG_NETFILTER_XT_TARGET_CHECKSUM is not set
CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
CONFIG_NETFILTER_XT_TARGET_CONNSECMARK=m
CONFIG_NETFILTER_XT_TARGET_CT=m
CONFIG_NETFILTER_XT_TARGET_DSCP=m
CONFIG_NETFILTER_XT_TARGET_HL=m
# CONFIG_NETFILTER_XT_TARGET_HMARK is not set
# CONFIG_NETFILTER_XT_TARGET_IDLETIMER is not set
# CONFIG_NETFILTER_XT_TARGET_LED is not set
# CONFIG_NETFILTER_XT_TARGET_LOG is not set
CONFIG_NETFILTER_XT_TARGET_MARK=m
CONFIG_NETFILTER_XT_TARGET_NFLOG=m
CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
CONFIG_NETFILTER_XT_TARGET_NOTRACK=m
# CONFIG_NETFILTER_XT_TARGET_RATEEST is not set
# CONFIG_NETFILTER_XT_TARGET_TEE is not set
CONFIG_NETFILTER_XT_TARGET_TRACE=m
CONFIG_NETFILTER_XT_TARGET_SECMARK=m
CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
# CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP is not set

#
# Xtables matches
#
# CONFIG_NETFILTER_XT_MATCH_ADDRTYPE is not set
# CONFIG_NETFILTER_XT_MATCH_BPF is not set
# CONFIG_NETFILTER_XT_MATCH_CLUSTER is not set
CONFIG_NETFILTER_XT_MATCH_COMMENT=m
CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
# CONFIG_NETFILTER_XT_MATCH_CONNLABEL is not set
CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m
CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
# CONFIG_NETFILTER_XT_MATCH_CPU is not set
CONFIG_NETFILTER_XT_MATCH_DCCP=m
# CONFIG_NETFILTER_XT_MATCH_DEVGROUP is not set
CONFIG_NETFILTER_XT_MATCH_DSCP=m
CONFIG_NETFILTER_XT_MATCH_ECN=m
CONFIG_NETFILTER_XT_MATCH_ESP=m
CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
CONFIG_NETFILTER_XT_MATCH_HELPER=m
CONFIG_NETFILTER_XT_MATCH_HL=m
# CONFIG_NETFILTER_XT_MATCH_IPRANGE is not set
CONFIG_NETFILTER_XT_MATCH_LENGTH=m
CONFIG_NETFILTER_XT_MATCH_LIMIT=m
CONFIG_NETFILTER_XT_MATCH_MAC=m
CONFIG_NETFILTER_XT_MATCH_MARK=m
CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
# CONFIG_NETFILTER_XT_MATCH_NFACCT is not set
# CONFIG_NETFILTER_XT_MATCH_OSF is not set
# CONFIG_NETFILTER_XT_MATCH_OWNER is not set
CONFIG_NETFILTER_XT_MATCH_POLICY=m
# CONFIG_NETFILTER_XT_MATCH_PHYSDEV is not set
CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
CONFIG_NETFILTER_XT_MATCH_QUOTA=m
# CONFIG_NETFILTER_XT_MATCH_RATEEST is not set
CONFIG_NETFILTER_XT_MATCH_REALM=m
# CONFIG_NETFILTER_XT_MATCH_RECENT is not set
CONFIG_NETFILTER_XT_MATCH_SCTP=m
CONFIG_NETFILTER_XT_MATCH_STATE=m
CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
CONFIG_NETFILTER_XT_MATCH_STRING=m
CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
CONFIG_NETFILTER_X
Back to top
View user's profile Send private message
n3bul4
Apprentice
Apprentice


Joined: 04 Nov 2003
Posts: 173

PostPosted: Tue Dec 10, 2013 11:46 pm    Post subject: Reply with quote

Nobody any ideas or suggestions?
Back to top
View user's profile Send private message
Display posts from previous:   
Reply to topic    Gentoo Forums Forum Index Desktop Environments All times are GMT
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum