Gentoo Forums
Gentoo Forums
Gentoo Forums
Quick Search: in
DVB-S-USB-Gerät wird nicht erkannt, zieht keine Firmware
View unanswered posts
View posts from last 24 hours
View posts from last 7 days

 
Reply to topic    Gentoo Forums Forum Index Deutsches Forum (German)
View previous topic :: View next topic  
Author Message
Mac Fly
Guru
Guru


Joined: 30 Nov 2003
Posts: 330
Location: nähe Stuttgart

PostPosted: Fri Oct 25, 2013 5:15 pm    Post subject: DVB-S-USB-Gerät wird nicht erkannt, zieht keine Firmware Reply with quote

Hallo zusammen,

hab hier ein kleines Problem, bei dem ich trotz fleissigen suchens nicht weiter komme.

Und zwar möchte ich eine Tivii S660 USB DVB-S Karte an mein System anschliessen, darüber dann tvheadend laufen lassen und zu guter letzt möchte ich eben auf meinem raspberry pi mit raspbmc TV schauen.

Ich habe nach diversen Howtos den kernel konfiguriert, die passende Firmware nach /lib/firmware kopiert und schliesslich das Gerät angeschlossen.
Allerdings erkennt es das System wohl nicht komplett, denn er zieht sich keine Firmware.

Folgendes passiert nach dem einstöpseln:
Code:
Oct 25 18:42:29 gboslave kernel: [  148.107758] hub 2-0:1.0: state 7 ports 5 chg 0000 evt 0004
Oct 25 18:42:29 gboslave kernel: [  148.107771] ehci-pci 0000:00:04.1: GetStatus port:2 status 001002 0  ACK POWER sig=se0 CSC
Oct 25 18:42:29 gboslave kernel: [  148.107780] hub 2-0:1.0: port 2, status 0100, change 0001, 12 Mb/s
Oct 25 18:42:29 gboslave kernel: [  148.107784] usb 2-2: USB disconnect, device number 2
Oct 25 18:42:29 gboslave kernel: [  148.107787] usb 2-2: unregistering device
Oct 25 18:42:29 gboslave kernel: [  148.107790] usb 2-2: unregistering interface 2-2:1.0
Oct 25 18:42:29 gboslave kernel: [  148.107863] usb 2-2: usb_disable_device nuking all URBs
Oct 25 18:42:29 gboslave kernel: [  148.211022] hub 2-0:1.0: debounce: port 2: total 100ms stable 100ms status 0x100
Oct 25 18:42:30 gboslave kernel: [  149.367492] hub 2-0:1.0: state 7 ports 5 chg 0000 evt 0004
Oct 25 18:42:30 gboslave kernel: [  149.367504] ehci-pci 0000:00:04.1: GetStatus port:2 status 001803 0  ACK POWER sig=j CSC CONNECT
Oct 25 18:42:30 gboslave kernel: [  149.367512] hub 2-0:1.0: port 2, status 0501, change 0001, 480 Mb/s
Oct 25 18:42:30 gboslave kernel: [  149.471022] hub 2-0:1.0: debounce: port 2: total 100ms stable 100ms status 0x501
Oct 25 18:42:30 gboslave kernel: [  149.522262] ehci-pci 0000:00:04.1: port 2 reset complete, port enabled
Oct 25 18:42:30 gboslave kernel: [  149.522268] ehci-pci 0000:00:04.1: GetStatus port:2 status 001005 0  ACK POWER sig=se0 PE CONNECT
Oct 25 18:42:30 gboslave kernel: [  149.573024] usb 2-2: new high-speed USB device number 3 using ehci-pci
Oct 25 18:42:30 gboslave kernel: [  149.624235] ehci-pci 0000:00:04.1: port 2 reset complete, port enabled
Oct 25 18:42:30 gboslave kernel: [  149.624242] ehci-pci 0000:00:04.1: GetStatus port:2 status 001005 0  ACK POWER sig=se0 PE CONNECT
Oct 25 18:42:30 gboslave kernel: [  149.687993] usb 2-2: udev 3, busnum 2, minor = 130
Oct 25 18:42:30 gboslave kernel: [  149.687997] usb 2-2: New USB device found, idVendor=9022, idProduct=d660
Oct 25 18:42:30 gboslave kernel: [  149.688000] usb 2-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
Oct 25 18:42:30 gboslave kernel: [  149.688111] usb 2-2: usb_probe_device
Oct 25 18:42:30 gboslave kernel: [  149.688115] usb 2-2: configuration #1 chosen from 1 choice
Oct 25 18:42:30 gboslave kernel: [  149.688236] usb 2-2: adding 2-2:1.0 (config #1, interface 0)


Allerdings steht da nirgends was von "loading Firmware" oder auch nur das Wort "dvb".

Ich denke, ich hab irgendwas elementares vergessen/übersehen? Kann mir jemand den Stoß in die richtige Richtung geben?

Hier noch ein paar Infos:

uname -a:
Code:
Linux gboslave 3.8.13-gentoo #2 SMP Sat Oct 19 16:45:03 CEST 2013 x86_64 AMD Athlon(tm) 64 X2 Dual Core Processor 4200+ AuthenticAMD GNU/Linux


Kernel .config: http://nopaste.info/348cd78669.html
dmesg: http://nopaste.info/d1bd7fc323.html
Back to top
View user's profile Send private message
Mac Fly
Guru
Guru


Joined: 30 Nov 2003
Posts: 330
Location: nähe Stuttgart

PostPosted: Sun Oct 27, 2013 3:17 pm    Post subject: Reply with quote

https://bitbucket.org/liplianin/s2-liplianin-v39

Das fehlte :)
Back to top
View user's profile Send private message
Display posts from previous:   
Reply to topic    Gentoo Forums Forum Index Deutsches Forum (German) All times are GMT
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum