| View previous topic :: View next topic |
| Author |
Message |
jkagen
n00b
Joined: 29 Jul 2008
Posts: 42
|
 Posted: Thu Oct 03, 2013 1:34 pm Post subject: problem with intel graphic card X does not start [SOLVED] |
 |
|
Hi folks
Until recently everything worked fine with my laptop.
Recently I updated to xorg-server-1.14.3,
rebuilt all modules (emerge @x11-module-rebuild) and since then I can not start X
I tried restarting both xdm and startx a number of times and it happened that 2 or three times I get a logins screen and I can
login to my KDE session. But it's been only two or three times out of tens of attemtps to restart X
I tried:
1. rebuild xorg-server + all modules
2. downgrade to lower version of xorg-server
3. rebuild udev and check it is on sysinit
About a week ago I rebuild entire system and word when updating to gcc-4.7.3
cat /proc/fb gives me
0 inteldrmfb
Attached is output of lspc-k, emerge --info, Xorg.0.log, make conf
Any help would be appreciated.
Thanks a lot!
lspci -k
| Quote: |
00:00.0 Host bridge: Intel Corporation Core Processor DRAM Controller (rev 12)
Subsystem: Acer Incorporated [ALI] Device 031c
Kernel driver in use: agpgart-intel
00:02.0 VGA compatible controller: Intel Corporation Core Processor Integrated Graphics Controller (rev 12)
Subsystem: Acer Incorporated [ALI] Device 031c
Kernel driver in use: i915
00:16.0 Communication controller: Intel Corporation 5 Series/3400 Series Chipset HECI Controller (rev 06)
Subsystem: Acer Incorporated [ALI] Device 031c
00:1a.0 USB controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 05)
Subsystem: Acer Incorporated [ALI] Device 031c
Kernel driver in use: ehci-pci
Kernel modules: ehci_pci
00:1b.0 Audio device: Intel Corporation 5 Series/3400 Series Chipset High Definition Audio (rev 05)
Subsystem: Acer Incorporated [ALI] Device 031c
Kernel driver in use: snd_hda_intel
Kernel modules: snd_hda_intel
00:1c.0 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 1 (rev 05)
Kernel driver in use: pcieport
00:1c.1 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 2 (rev 05)
Kernel driver in use: pcieport
00:1d.0 USB controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 05)
Subsystem: Acer Incorporated [ALI] Device 031c
Kernel driver in use: ehci-pci
Kernel modules: ehci_pci
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev a5)
00:1f.0 ISA bridge: Intel Corporation Mobile 5 Series Chipset LPC Interface Controller (rev 05)
Subsystem: Acer Incorporated [ALI] Device 031c
00:1f.2 SATA controller: Intel Corporation 5 Series/3400 Series Chipset 4 port SATA AHCI Controller (rev 05)
Subsystem: Acer Incorporated [ALI] Device 031c
Kernel driver in use: ahci
00:1f.3 SMBus: Intel Corporation 5 Series/3400 Series Chipset SMBus Controller (rev 05)
Subsystem: Acer Incorporated [ALI] Device 031c
00:1f.6 Signal processing controller: Intel Corporation 5 Series/3400 Series Chipset Thermal Subsystem (rev 05)
Subsystem: Acer Incorporated [ALI] Device 0000
01:00.0 Ethernet controller: Broadcom Corporation NetLink BCM57780 Gigabit Ethernet PCIe (rev 01)
Subsystem: Acer Incorporated [ALI] Device 0139
Kernel driver in use: tg3
Kernel modules: tg3
02:00.0 Network controller: Atheros Communications Inc. AR928X Wireless Network Adapter (PCI-Express) (rev 01)
Subsystem: Lite-On Communications Inc Device 6632
Kernel driver in use: ath9k
Kernel modules: ath9k
ff:00.0 Host bridge: Intel Corporation Core Processor QuickPath Architecture Generic Non-core Registers (rev 02)
Subsystem: Acer Incorporated [ALI] Device 031c
ff:00.1 Host bridge: Intel Corporation Core Processor QuickPath Architecture System Address Decoder (rev 02)
Subsystem: Acer Incorporated [ALI] Device 031c
ff:02.0 Host bridge: Intel Corporation Core Processor QPI Link 0 (rev 02)
Subsystem: Acer Incorporated [ALI] Device 031c
ff:02.1 Host bridge: Intel Corporation Core Processor QPI Physical 0 (rev 02)
Subsystem: Acer Incorporated [ALI] Device 031c
ff:02.2 Host bridge: Intel Corporation Core Processor Reserved (rev 02)
Subsystem: Acer Incorporated [ALI] Device 031c
ff:02.3 Host bridge: Intel Corporation Core Processor Reserved (rev 02)
Subsystem: Acer Incorporated [ALI] Device 031c
|
emerge --info
| Quote: |
Portage 2.2.1 (default/linux/amd64/13.0, gcc-4.7.3, glibc-2.15-r3, 3.10.7-gentoo x86_64)
=================================================================
System uname: Linux-3.10.7-gentoo-x86_64-Intel-R-_Core-TM-_i3_CPU_M_330_@_2.13GHz-with-gentoo-2.2
KiB Mem: 3719256 total, 3361208 free
KiB Swap: 8393956 total, 8393956 free
Timestamp of tree: Tue, 01 Oct 2013 14:30:01 +0000
ld GNU ld (GNU Binutils) 2.23.1
ccache version 3.1.9 [disabled]
app-shells/bash: 4.2_p45
dev-java/java-config: 2.1.12-r1
dev-lang/python: 2.5.4-r5, 2.6.8-r3, 2.7.5-r2, 3.1.5-r1, 3.2.5-r2
dev-util/ccache: 3.1.9
dev-util/cmake: 2.8.10.2-r2
dev-util/pkgconfig: 0.28
sys-apps/baselayout: 2.2
sys-apps/openrc: 0.11.8
sys-apps/sandbox: 2.6-r1
sys-devel/autoconf: 2.13, 2.69
sys-devel/automake: 1.9.6-r3, 1.10.3, 1.11.6, 1.12.6, 1.13.4
sys-devel/binutils: 2.23.1
sys-devel/gcc: 4.6.3, 4.7.3-r1
sys-devel/gcc-config: 1.7.3
sys-devel/libtool: 2.4.2
sys-devel/make: 3.82-r4
sys-kernel/linux-headers: 3.9 (virtual/os-headers)
sys-libs/glibc: 2.15-r3
Repositories: gentoo local_overlay
ACCEPT_KEYWORDS="amd64"
ACCEPT_LICENSE="*"
CBUILD="x86_64-pc-linux-gnu"
CFLAGS="-march=core2 -msse4 -mcx16 -msahf -O2 -pipe"
CHOST="x86_64-pc-linux-gnu"
CONFIG_PROTECT="/etc /usr/share/config /usr/share/gnupg/qualified.txt /var/lib/hsqldb"
CONFIG_PROTECT_MASK="/etc/ca-certificates.conf /etc/env.d /etc/fonts/fonts.conf /etc/gconf /etc/gentoo-release /etc/revdep-rebuild /etc/sandbox.d /etc/terminfo /etc/texmf/language.dat.d /etc/texmf/language.def.d /etc/texmf/updmap.d /etc/texmf/web2c"
CXXFLAGS="-march=core2 -msse4 -mcx16 -msahf -O2 -pipe"
DISTDIR="/usr/portage/distfiles"
FCFLAGS="-O2 -pipe"
FEATURES="assume-digests binpkg-logs config-protect-if-modified distlocks ebuild-locks fixlafiles merge-sync news parallel-fetch preserve-libs protect-owned sandbox sfperms splitdebug strict unknown-features-warn unmerge-logs unmerge-orphans userfetch userpriv usersandbox usersync"
FFLAGS="-O2 -pipe"
GENTOO_MIRRORS="http://distfiles.gentoo.org"
LDFLAGS="-Wl,-O1 -Wl,--as-needed"
MAKEOPTS="-j2"
PKGDIR="/usr/portage/packages"
PORTAGE_CONFIGROOT="/"
PORTAGE_RSYNC_OPTS="--recursive --links --safe-links --perms --times --omit-dir-times --compress --force --whole-file --delete --stats --human-readable --timeout=180 --exclude=/distfiles --exclude=/local --exclude=/packages"
PORTAGE_TMPDIR="/var/tmp"
PORTDIR="/usr/portage"
PORTDIR_OVERLAY="/usr/local/portage"
USE="X a52 acl acpi alsa amd64 ansi apm audiofile berkdb bluetooth bzip2 cairo cddb cli codec compiz compiz-fusion cracklib crypt cxx dbus dri dvd dvdr exif expat fam ffmpeg fontconfig foomaticdb fortran freetype gca gda gdbm gif glut gmp gstreamer gt3 iconv idn ieee1394 imagemagic imlib ipv6 java javascript jpeg jpeg3k kde kerberos latex lcmi libwww lm_sensors mad mms mmx modules motif mozilla mplayer mudflap multilib ncurses nforce2 nls nptl opengl openmp pam pcre pmu png qt3support qtk quassel readline samba screenlets sdl session sse sse2 ssl subversion svg tcpd tiff tk truetype udev unicode usb win32 xerces-c xorg-server xscreensaver xvid zlib" ABI_X86="64" ALSA_CARDS="ali5451 als4000 atiixp atiixp-modem bt87x ca0106 cmipci emu10k1x ens1370 ens1371 es1938 es1968 fm801 hda-intel intel8x0 intel8x0m maestro3 trident usb-audio via82xx via82xx-modem ymfpci" APACHE2_MODULES="authn_core authz_core socache_shmcb unixd actions alias auth_basic authn_alias authn_anon authn_dbm authn_default authn_file authz_dbm authz_default authz_groupfile authz_host authz_owner authz_user autoindex cache cgi cgid dav dav_fs dav_lock deflate dir disk_cache env expires ext_filter file_cache filter headers include info log_config logio mem_cache mime mime_magic negotiation rewrite setenvif speling status unique_id userdir usertrack vhost_alias" CALLIGRA_FEATURES="kexi words flow plan sheets stage tables krita karbon braindump author" CAMERAS="ptp2" COLLECTD_PLUGINS="df interface irq load memory rrdtool swap syslog" ELIBC="glibc" GPSD_PROTOCOLS="ashtech aivdm earthmate evermore fv18 garmin garmintxt gpsclock itrax mtk3301 nmea ntrip navcom oceanserver oldstyle oncore rtcm104v2 rtcm104v3 sirf superstar2 timing tsip tripmate tnt ubx" INPUT_DEVICES="evdev" KERNEL="linux" LCD_DEVICES="bayrad cfontz cfontz633 glk hd44780 lb216 lcdm001 mtxorb ncurses text" LIBREOFFICE_EXTENSIONS="presenter-console presenter-minimizer" OFFICE_IMPLEMENTATION="libreoffice" PHP_TARGETS="php5-5" PYTHON_SINGLE_TARGET="python2_7" PYTHON_TARGETS="jython2_5 pypy1_8 pypy1_9 python2_5 python2_6 python2_7 python3_1 python3_2" RUBY_TARGETS="ruby19" USERLAND="GNU" VIDEO_CARDS="intel" XTABLES_ADDONS="quota2 psd pknock lscan length2 ipv4options ipset ipp2p iface geoip fuzzy condition tee tarpit sysrq steal rawnat logmark ipmark dhcpmac delude chaos account"
USE_PYTHON="2.6 2.7 3.2"
Unset: CPPFLAGS, CTARGET, EMERGE_DEFAULT_OPTS, INSTALL_MASK, LANG, LC_ALL, PORTAGE_BUNZIP2_COMMAND, PORTAGE_COMPRESS, PORTAGE_COMPRESS_FLAGS, PORTAGE_RSYNC_EXTRA_OPTS, SYNC
|
Xorg.0.log
| Quote: |
[ 415.940]
X.Org X Server 1.14.3
Release Date: 2013-09-12
[ 415.941] X Protocol Version 11, Revision 0
[ 415.943] Build Operating System: Linux 3.10.7-gentoo x86_64 Gentoo
[ 415.946] Current Operating System: Linux eaglespeak 3.10.7-gentoo #1 SMP Wed Oct 2 14:45:22 MDT 2013 x86_64
[ 415.946] Kernel command line: root=/dev/sda1 quiet udev
[ 415.948] Build Date: 03 October 2013 07:44:38AM
[ 415.948]
[ 415.949] Current version of pixman: 0.30.2
[ 415.952] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 415.952] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 415.960] (==) Log file: "/var/log/Xorg.0.log", Time: Thu Oct 3 08:08:43 2013
[ 415.962] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 415.962] (==) No Layout section. Using the first Screen section.
[ 415.962] (==) No screen section available. Using defaults.
[ 415.962] (**) |-->Screen "Default Screen Section" (0)
[ 415.962] (**) | |-->Monitor "<default monitor>"
[ 415.962] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 415.962] (==) Automatically adding devices
[ 415.962] (==) Automatically enabling devices
[ 415.962] (==) Automatically adding GPU devices
[ 415.963] (WW) The directory "/usr/share/fonts/TTF/" does not exist.
[ 415.963] Entry deleted from font path.
[ 415.963] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 415.963] Entry deleted from font path.
[ 415.963] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
[ 415.963] Entry deleted from font path.
[ 415.963] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 415.963] Entry deleted from font path.
[ 415.963] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 415.963] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 415.963] Entry deleted from font path.
[ 415.963] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 415.963] (==) FontPath set to:
/usr/share/fonts/misc/
[ 415.963] (==) ModulePath set to "/usr/lib64/xorg/modules"
[ 415.963] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 415.963] (II) Loader magic: 0x7febe0
[ 415.963] (II) Module ABI versions:
[ 415.963] X.Org ANSI C Emulation: 0.4
[ 415.963] X.Org Video Driver: 14.1
[ 415.963] X.Org XInput driver : 19.1
[ 415.963] X.Org Server Extension : 7.0
[ 415.963] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 415.965] (--) PCI:*(0:0:2:0) 8086:0046:1025:031c rev 18, Mem @ 0xd0000000/4194304, 0xc0000000/268435456, I/O @ 0x00003050/8
[ 415.967] Initializing built-in extension Generic Event Extension
[ 415.968] Initializing built-in extension SHAPE
[ 415.969] Initializing built-in extension MIT-SHM
[ 415.970] Initializing built-in extension XInputExtension
[ 415.972] Initializing built-in extension XTEST
[ 415.973] Initializing built-in extension BIG-REQUESTS
[ 415.974] Initializing built-in extension SYNC
[ 415.975] Initializing built-in extension XKEYBOARD
[ 415.976] Initializing built-in extension XC-MISC
[ 415.977] Initializing built-in extension XINERAMA
[ 415.978] Initializing built-in extension XFIXES
[ 415.979] Initializing built-in extension RENDER
[ 415.981] Initializing built-in extension RANDR
[ 415.982] Initializing built-in extension COMPOSITE
[ 415.983] Initializing built-in extension DAMAGE
[ 415.984] Initializing built-in extension MIT-SCREEN-SAVER
[ 415.986] Initializing built-in extension DOUBLE-BUFFER
[ 415.987] Initializing built-in extension RECORD
[ 416.032] Initializing built-in extension DPMS
[ 416.077] Initializing built-in extension X-Resource
[ 416.121] Initializing built-in extension XVideo
[ 416.165] Initializing built-in extension XVideo-MotionCompensation
[ 416.208] Initializing built-in extension XFree86-VidModeExtension
[ 416.247] Initializing built-in extension XFree86-DGA
[ 416.282] Initializing built-in extension XFree86-DRI
[ 416.316] Initializing built-in extension DRI2
[ 416.316] (II) LoadModule: "glx"
[ 416.316] (II) Loading /usr/lib64/xorg/modules/extensions/libglx.so
[ 416.316] (II) Module glx: vendor="X.Org Foundation"
[ 416.316] compiled for 1.14.3, module version = 1.0.0
[ 416.316] ABI class: X.Org Server Extension, version 7.0
[ 416.316] (==) AIGLX enabled
[ 416.350] Loading extension GLX
[ 416.350] (==) Matched intel as autoconfigured driver 0
[ 416.350] (==) Matched intel as autoconfigured driver 1
[ 416.350] (==) Matched vesa as autoconfigured driver 2
[ 416.350] (==) Matched modesetting as autoconfigured driver 3
[ 416.350] (==) Matched fbdev as autoconfigured driver 4
[ 416.350] (==) Assigned the driver to the xf86ConfigLayout
[ 416.350] (II) LoadModule: "intel"
[ 416.350] (II) Loading /usr/lib64/xorg/modules/drivers/intel_drv.so
[ 416.350] (II) Module intel: vendor="X.Org Foundation"
[ 416.350] compiled for 1.14.3, module version = 2.21.15
[ 416.350] Module class: X.Org Video Driver
[ 416.350] ABI class: X.Org Video Driver, version 14.1
[ 416.350] (II) LoadModule: "vesa"
[ 416.350] (II) Loading /usr/lib64/xorg/modules/drivers/vesa_drv.so
[ 416.351] (II) Module vesa: vendor="X.Org Foundation"
[ 416.351] compiled for 1.14.3, module version = 2.3.3
[ 416.351] Module class: X.Org Video Driver
[ 416.351] ABI class: X.Org Video Driver, version 14.1
[ 416.351] (II) LoadModule: "modesetting"
[ 416.351] (WW) Warning, couldn't open module modesetting
[ 416.351] (II) UnloadModule: "modesetting"
[ 416.351] (II) Unloading modesetting
[ 416.351] (EE) Failed to load module "modesetting" (module does not exist, 0)
[ 416.351] (II) LoadModule: "fbdev"
[ 416.351] (WW) Warning, couldn't open module fbdev
[ 416.351] (II) UnloadModule: "fbdev"
[ 416.351] (II) Unloading fbdev
[ 416.351] (EE) Failed to load module "fbdev" (module does not exist, 0)
[ 416.351] (II) intel: Driver for Intel(R) Integrated Graphics Chipsets:
i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G,
915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM,
Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33,
GM45, 4 Series, G45/G43, Q45/Q43, G41, B43, HD Graphics,
HD Graphics 2000, HD Graphics 3000, HD Graphics 2500,
HD Graphics 4000, HD Graphics P4000, HD Graphics 4600,
HD Graphics 5000, HD Graphics P4600/P4700, Iris(TM) Graphics 5100,
HD Graphics 4400, HD Graphics 4200, Iris(TM) Pro Graphics 5200
[ 416.351] (II) VESA: driver for VESA chipsets: vesa
[ 416.351] (--) using VT number 7
[ 416.584] (WW) Falling back to old probe method for vesa
[ 416.584] (II) intel(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 416.584] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[ 416.584] (==) intel(0): RGB weight 888
[ 416.584] (==) intel(0): Default visual is TrueColor
[ 416.584] (--) intel(0): Integrated Graphics Chipset: Intel(R) HD Graphics
[ 416.585] (--) intel(0): CPU: x86-64, sse2, sse3, ssse3, sse4.1, sse4.2
[ 416.585] (**) intel(0): Framebuffer tiled
[ 416.585] (**) intel(0): Pixmaps tiled
[ 416.585] (**) intel(0): "Tear free" disabled
[ 416.585] (**) intel(0): Forcing per-crtc-pixmaps? no
[ 416.585] (II) intel(0): Output LVDS1 has no monitor section
[ 416.585] (--) intel(0): found backlight control interface acpi_video0 (type 'firmware')
[ 416.585] (II) intel(0): Output VGA1 has no monitor section
[ 416.585] (II) intel(0): Output HDMI1 has no monitor section
[ 416.585] (II) intel(0): Output DP1 has no monitor section
[ 416.585] (==) intel(0): DPI set to (96, 96)
[ 416.585] (II) Loading sub module "dri2"
[ 416.585] (II) LoadModule: "dri2"
[ 416.585] (II) Module "dri2" already built-in
[ 416.585] (II) UnloadModule: "vesa"
[ 416.585] (II) Unloading vesa
[ 416.586] (==) Depth 24 pixmap format is 32 bpp
[ 416.586] (II) intel(0): SNA initialized with Ironlake (gen5) backend
[ 416.586] (==) intel(0): Backing store disabled
[ 416.586] (==) intel(0): Silken mouse enabled
[ 416.586] (II) intel(0): HW Cursor enabled
[ 416.586] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 416.586] (==) intel(0): DPMS enabled
[ 416.587] (II) intel(0): [DRI2] Setup complete
[ 416.587] (II) intel(0): [DRI2] DRI driver: i965
[ 416.587] (II) intel(0): direct rendering: DRI2 Enabled
[ 416.587] (==) intel(0): hotplug detection: "enabled"
[ 416.587] (--) RandR disabled
[ 416.606] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[ 416.606] (II) AIGLX: enabled GLX_INTEL_swap_event
[ 416.606] (II) AIGLX: enabled GLX_ARB_create_context
[ 416.606] (II) AIGLX: enabled GLX_ARB_create_context_profile
[ 416.606] (II) AIGLX: enabled GLX_EXT_create_context_es2_profile
[ 416.606] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[ 416.606] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[ 416.607] (II) AIGLX: Loaded and initialized i965
[ 416.607] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 416.999] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[ 416.999] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 416.999] (II) LoadModule: "evdev"
[ 416.999] (II) Loading /usr/lib64/xorg/modules/input/evdev_drv.so
[ 416.999] (II) Module evdev: vendor="X.Org Foundation"
[ 416.999] compiled for 1.14.3, module version = 2.8.1
[ 416.999] Module class: X.Org XInput Driver
[ 417.000] ABI class: X.Org XInput driver, version 19.1
[ 417.000] (II) Using input driver 'evdev' for 'Power Button'
[ 417.000] (**) Power Button: always reports core events
[ 417.000] (**) evdev: Power Button: Device: "/dev/input/event3"
[ 417.000] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 417.000] (--) evdev: Power Button: Found keys
[ 417.000] (II) evdev: Power Button: Configuring as keyboard
[ 417.000] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3/event3"
[ 417.000] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 417.000] (**) Option "xkb_rules" "evdev"
[ 417.000] (**) Option "xkb_model" "pc104"
[ 417.000] (**) Option "xkb_layout" "us"
[ 417.050] (II) config/udev: Adding input device Video Bus (/dev/input/event4)
[ 417.050] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 417.050] (II) Using input driver 'evdev' for 'Video Bus'
[ 417.050] (**) Video Bus: always reports core events
[ 417.050] (**) evdev: Video Bus: Device: "/dev/input/event4"
[ 417.050] (--) evdev: Video Bus: Vendor 0 Product 0x6
[ 417.050] (--) evdev: Video Bus: Found keys
[ 417.050] (II) evdev: Video Bus: Configuring as keyboard
[ 417.050] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input4/event4"
[ 417.050] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[ 417.050] (**) Option "xkb_rules" "evdev"
[ 417.050] (**) Option "xkb_model" "pc104"
[ 417.050] (**) Option "xkb_layout" "us"
[ 417.051] (II) config/udev: Adding input device Power Button (/dev/input/event0)
[ 417.051] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 417.051] (II) Using input driver 'evdev' for 'Power Button'
[ 417.051] (**) Power Button: always reports core events
[ 417.051] (**) evdev: Power Button: Device: "/dev/input/event0"
[ 417.051] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 417.051] (--) evdev: Power Button: Found keys
[ 417.051] (II) evdev: Power Button: Configuring as keyboard
[ 417.051] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/device:0e/PNP0C0C:00/input/input0/event0"
[ 417.051] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 
[ 417.051] (**) Option "xkb_rules" "evdev"
[ 417.051] (**) Option "xkb_model" "pc104"
[ 417.051] (**) Option "xkb_layout" "us"
[ 417.052] (II) config/udev: Adding input device Lid Switch (/dev/input/event1)
[ 417.052] (II) No input driver specified, ignoring this device.
[ 417.052] (II) This device may have been added with another device file.
[ 417.052] (II) config/udev: Adding input device Sleep Button (/dev/input/event2)
[ 417.052] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[ 417.052] (II) Using input driver 'evdev' for 'Sleep Button'
[ 417.052] (**) Sleep Button: always reports core events
[ 417.052] (**) evdev: Sleep Button: Device: "/dev/input/event2"
[ 417.053] (--) evdev: Sleep Button: Vendor 0 Product 0x3
[ 417.053] (--) evdev: Sleep Button: Found keys
[ 417.053] (II) evdev: Sleep Button: Configuring as keyboard
[ 417.053] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/device:0e/PNP0C0E:00/input/input2/event2"
[ 417.053] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 9)
[ 417.053] (**) Option "xkb_rules" "evdev"
[ 417.053] (**) Option "xkb_model" "pc104"
[ 417.053] (**) Option "xkb_layout" "us"
[ 417.053] (II) config/udev: Adding drm device (/dev/dri/card0)
[ 417.054] (II) config/udev: Adding input device HDA Intel MID Headphone (/dev/input/event10)
[ 417.054] (II) No input driver specified, ignoring this device.
[ 417.054] (II) This device may have been added with another device file.
[ 417.054] (II) config/udev: Adding input device HDA Intel MID Mic (/dev/input/event11)
[ 417.054] (II) No input driver specified, ignoring this device.
[ 417.054] (II) This device may have been added with another device file.
[ 417.055] (II) config/udev: Adding input device HDA Intel MID HDMI/DP,pcm=3 (/dev/input/event9)
[ 417.055] (II) No input driver specified, ignoring this device.
[ 417.055] (II) This device may have been added with another device file.
[ 417.055] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/event7)
[ 417.055] (**) Logitech USB Receiver: Applying InputClass "evdev pointer catchall"
[ 417.055] (II) Using input driver 'evdev' for 'Logitech USB Receiver'
[ 417.055] (**) Logitech USB Receiver: always reports core events
[ 417.055] (**) evdev: Logitech USB Receiver: Device: "/dev/input/event7"
[ 417.055] (--) evdev: Logitech USB Receiver: Vendor 0x46d Product 0xc526
[ 417.055] (--) evdev: Logitech USB Receiver: Found 20 mouse buttons
[ 417.055] (--) evdev: Logitech USB Receiver: Found scroll wheel(s)
[ 417.056] (--) evdev: Logitech USB Receiver: Found relative axes
[ 417.056] (--) evdev: Logitech USB Receiver: Found x and y relative axes
[ 417.056] (II) evdev: Logitech USB Receiver: Configuring as mouse
[ 417.056] (II) evdev: Logitech USB Receiver: Adding scrollwheel support
[ 417.056] (**) evdev: Logitech USB Receiver: YAxisMapping: buttons 4 and 5
[ 417.056] (**) evdev: Logitech USB Receiver: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 417.056] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.0/input/input7/event7"
[ 417.056] (II) XINPUT: Adding extended input device "Logitech USB Receiver" (type: MOUSE, id 10)
[ 417.056] (II) evdev: Logitech USB Receiver: initialized for relative axes.
[ 417.056] (**) Logitech USB Receiver: (accel) keeping acceleration scheme 1
[ 417.056] (**) Logitech USB Receiver: (accel) acceleration profile 0
[ 417.056] (**) Logitech USB Receiver: (accel) acceleration factor: 2.000
[ 417.056] (**) Logitech USB Receiver: (accel) acceleration threshold: 4
[ 417.057] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/mouse1)
[ 417.057] (II) No input driver specified, ignoring this device.
[ 417.057] (II) This device may have been added with another device file.
[ 417.058] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/event8)
[ 417.058] (**) Logitech USB Receiver: Applying InputClass "evdev keyboard catchall"
[ 417.058] (II) Using input driver 'evdev' for 'Logitech USB Receiver'
[ 417.058] (**) Logitech USB Receiver: always reports core events
[ 417.058] (**) evdev: Logitech USB Receiver: Device: "/dev/input/event8"
[ 417.058] (--) evdev: Logitech USB Receiver: Vendor 0x46d Product 0xc526
[ 417.058] (--) evdev: Logitech USB Receiver: Found 1 mouse buttons
[ 417.058] (--) evdev: Logitech USB Receiver: Found scroll wheel(s)
[ 417.058] (--) evdev: Logitech USB Receiver: Found relative axes
[ 417.058] (II) evdev: Logitech USB Receiver: Forcing relative x/y axes to exist.
[ 417.058] (--) evdev: Logitech USB Receiver: Found absolute axes
[ 417.058] (II) evdev: Logitech USB Receiver: Forcing absolute x/y axes to exist.
[ 417.058] (--) evdev: Logitech USB Receiver: Found keys
[ 417.058] (II) evdev: Logitech USB Receiver: Configuring as mouse
[ 417.058] (II) evdev: Logitech USB Receiver: Configuring as keyboard
[ 417.058] (II) evdev: Logitech USB Receiver: Adding scrollwheel support
[ 417.058] (**) evdev: Logitech USB Receiver: YAxisMapping: buttons 4 and 5
[ 417.058] (**) evdev: Logitech USB Receiver: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 417.058] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.1/input/input8/event8"
[ 417.058] (II) XINPUT: Adding extended input device "Logitech USB Receiver" (type: KEYBOARD, id 11)
[ 417.058] (**) Option "xkb_rules" "evdev"
[ 417.058] (**) Option "xkb_model" "pc104"
[ 417.058] (**) Option "xkb_layout" "us"
[ 417.059] (II) evdev: Logitech USB Receiver: initialized for relative axes.
[ 417.059] (WW) evdev: Logitech USB Receiver: ignoring absolute axes.
[ 417.059] (**) Logitech USB Receiver: (accel) keeping acceleration scheme 1
[ 417.059] (**) Logitech USB Receiver: (accel) acceleration profile 0
[ 417.059] (**) Logitech USB Receiver: (accel) acceleration factor: 2.000
[ 417.059] (**) Logitech USB Receiver: (accel) acceleration threshold: 4
[ 417.060] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event5)
[ 417.060] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 417.060] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[ 417.060] (**) AT Translated Set 2 keyboard: always reports core events
[ 417.060] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event5"
[ 417.060] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[ 417.060] (--) evdev: AT Translated Set 2 keyboard: Found keys
[ 417.060] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[ 417.060] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input5/event5"
[ 417.060] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 12)
[ 417.060] (**) Option "xkb_rules" "evdev"
[ 417.060] (**) Option "xkb_model" "pc104"
[ 417.060] (**) Option "xkb_layout" "us"
[ 417.061] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event6)
[ 417.061] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
[ 417.061] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
[ 417.061] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "Default clickpad buttons"
[ 417.061] (II) LoadModule: "synaptics"
[ 417.061] (II) Loading /usr/lib64/xorg/modules/input/synaptics_drv.so
[ 417.061] (II) Module synaptics: vendor="X.Org Foundation"
[ 417.061] compiled for 1.14.3, module version = 1.7.1
[ 417.061] Module class: X.Org XInput Driver
[ 417.061] ABI class: X.Org XInput driver, version 19.1
[ 417.061] (II) Using input driver 'synaptics' for 'SynPS/2 Synaptics TouchPad'
[ 417.061] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 417.061] (**) Option "Device" "/dev/input/event6"
[ 417.201] (II) synaptics: SynPS/2 Synaptics TouchPad: ignoring touch events for semi-multitouch device
[ 417.201] (--) synaptics: SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5584 (res 61)
[ 417.201] (--) synaptics: SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4434 (res 81)
[ 417.201] (--) synaptics: SynPS/2 Synaptics TouchPad: pressure range 0 - 255
[ 417.201] (--) synaptics: SynPS/2 Synaptics TouchPad: finger width range 0 - 15
[ 417.201] (--) synaptics: SynPS/2 Synaptics TouchPad: buttons: left right double triple scroll-buttons
[ 417.201] (--) synaptics: SynPS/2 Synaptics TouchPad: Vendor 0x2 Product 0x7
[ 417.201] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[ 417.201] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 417.267] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input6/event6"
[ 417.268] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 13)
[ 417.268] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MinSpeed is now constant deceleration 2.5
[ 417.268] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MaxSpeed is now 1.75
[ 417.268] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) AccelFactor is now 0.039
[ 417.268] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
[ 417.268] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 1
[ 417.268] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
[ 417.268] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
[ 417.268] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[ 417.268] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse0)
[ 417.269] (**) SynPS/2 Synaptics TouchPad: Ignoring device from InputClass "touchpad ignore duplicates"
[ 418.138] (II) UnloadModule: "synaptics"
[ 418.138] (II) evdev: AT Translated Set 2 keyboard: Close
[ 418.138] (II) UnloadModule: "evdev"
[ 418.138] (II) evdev: Logitech USB Receiver: Close
[ 418.138] (II) UnloadModule: "evdev"
[ 418.138] (II) evdev: Logitech USB Receiver: Close
[ 418.138] (II) UnloadModule: "evdev"
[ 418.138] (II) evdev: Sleep Button: Close
[ 418.138] (II) UnloadModule: "evdev"
[ 418.138] (II) evdev: Power Button: Close
[ 418.138] (II) UnloadModule: "evdev"
[ 418.138] (II) evdev: Video Bus: Close
[ 418.138] (II) UnloadModule: "evdev"
[ 418.138] (II) evdev: Power Button: Close
[ 418.138] (II) UnloadModule: "evdev"
[ 418.990] (EE) Server terminated successfully (0). Closing log file.
|
make.cof
| Quote: |
# Copyright 1999-2007 Gentoo Foundation
# Distributed under the terms of the GNU General Public License v2
# $Id: make.conf 13289 2009-04-03 22:27:18Z zmedico $
# Contains local system settings for Portage system
# Please review 'man make.conf' for more information.
# Build-time functionality
# ========================
#
# The USE variable is used to enable optional build-time functionality. For
# example, quite a few packages have optional X, gtk or GNOME functionality
# that can only be enabled or disabled at compile-time. Gentoo Linux has a
# very extensive set of USE variables described in our USE variable HOWTO at
# http://www.gentoo.org/doc/en/handbook/handbook-x86.xml?part=2&chap=1
#
# The available list of use flags with descriptions is in your portage tree.
# Use 'less' to view them: --> less /usr/portage/profiles/use.desc <--
#
USE="X a52 acpi alsa ansi apm audiofile bzip2 bluetooth cairo cddb compiz compiz-fusion
dbus dvd dvdr exif expat fam ffmpeg fontconfig foomaticdb freetype
qtk gca gda gif glut gmp gstreamer idn ieee1394 imagemagic imlib
java javascript jpeg jpeg3k kde kerberos lcmi libwww lm_sensors mad mms nforce2 motif mozilla mplayer
opengl png pmu gt3 qt3support samba sdl sse sse2 subversion svg tiff latex tk truetype
udev usb win32 codec xscreensaver xvid
quassel xorg-server screenlets xerces-c"
FEATURES="splitdebug"
# Host Setting
# ============
#
# DO NOT CHANGE THIS SETTING UNLESS YOU ARE USING STAGE1!
# Change this line as appropriate (i686, i586, i486 or i386).
# All modern systems (even Athlons) should use "i686-pc-linux-gnu".
# All K6's are i586.
CHOST="x86_64-pc-linux-gnu"
# Host and optimization settings
# ==============================
#
# For optimal performance, enable a CFLAGS setting appropriate for your CPU.
#
# Please note that if you experience strange issues with a package, it may be
# due to gcc's optimizations interacting in a strange way. Please test the
# package (and in some cases the libraries it uses) at default optimizations
# before reporting errors to developers.
#
# -mcpu=<cpu-type> means optimize code for the particular type of CPU without
# breaking compatibility with other CPUs.
#
# -march=<cpu-type> means to take full advantage of the ABI and instructions
# for the particular CPU; this will break compatibility with older CPUs (for
# example, -march=athlon-xp code will not run on a regular Athlon, and
# -march=i686 code will not run on a Pentium Classic.
#
# CPU types supported by gcc version:
# (Higher versions include the targets from older ones,
# those listed on the same line are equivalent.)
# === >=gcc-2.95
# i386 Original Intel's i386.
# i486 Intel's i486. (No scheduling implemented.)
# i586, pentium Intel Pentium with no MMX support.
# pentium-mmx Intel PentiumMMX based on Pentium core with MMX.
# i686, pentiumpro Intel PentiumPro.
# === >=gcc-3.2
# k6 AMD K6 with MMX.
# k6-2, k6-3 AMD K6 with MMX and 3dNOW!.
# pentium2 Intel Pentium2 based on PentiumPro with MMX.
# pentium3 Intel Pentium3 based on PentiumPro with MMX and SSE.
# pentium4 Intel Pentium4 with MMX, SSE and SSE2.
# athlon, athlon-tbird AMD Athlon with MMX, 3dNOW!, enhanced 3dNOW!
# and SSE prefetch.
# athlon-4, athlon-xp, athlon-mp AMD Athlon with MMX, 3dNOW!, enhanced
# 3dNOW! and full SSE.
# === >=gcc-3.3
# winchip-c6 IDT Winchip C6, i486 with MMX.
# winchip2 IDT Winchip2, i486 MMX and 3dNOW!.
# c3 Via C3 with MMX and 3dNOW! (No scheduling implemented.)
# === >=gcc-4.1
# c3-2 Via C3-2 with MMX and SSE. (No scheduling implemented.)
# pentium-m Low power version of Intel Pentium3 with MMX, SSE, SSE2.
# Used by Centrino notebooks.
# prescott Intel Pentium4 with MMX, SSE, SSE2 and SSE3.
# nocona Intel Pentium4 with 64-bit extensions, MMX, SSE, SSE2
# and SSE3.
# k8, opteron, athlon64, athlon-fx AMD K8 core based CPUs with x86-64.
# (This supersets MMX, SSE, SSE2, 3dNOW!, enhanced 3dNOW! and
# 64-bit extensions.)
#
# Gentoo Linux 1.2 and below used gcc-2.95*
# Gentoo Linux 1.4 and 2004.* had gcc-3.2
# Gentoo Linux 2005.1 through 2006.0 use gcc-3.3
# Gentoo Linux 2006.1 has gcc-4.1
#
#
# CRITICAL WARNINGS: ****************************************************** #
# K6 markings are deceptive. Avoid setting -march for them. See Bug #24379. #
# Pentium-M CPUs should not enable sse2 until at least gcc-3.4. Bug 50616. #
# ************************************************************************* #
#
# NOTE: the -On optimization levels are set with the letter O, not -0 (zero).
#
# Decent examples:
CFLAGS="-march=core2 -msse4 -mcx16 -msahf -O2 -pipe"
# If you set a CFLAGS above, then this line will set your default C++ flags to
# the same settings.
CXXFLAGS="${CFLAGS}"
# PORTAGE_ELOG_MAILSUBJECT: template string to be used as subject for logmails. The following
# variables are expanded:
# ${PACKAGE} - see description of PORTAGE_ELOG_COMMAND
# ${HOST} - FQDN of the host portage is running on
#PORTAGE_ELOG_MAILSUBJECT="[portage] ebuild log for \${PACKAGE} on \${HOST}"
VIDEO_CARDS="intel"
INPUT_DEVICES="evdev"
MAKEOPTS="-j2"
PORTDIR_OVERLAY="${PORTDIR_OVERLAY} /usr/local/portage/"
ACCEPT_LICENSE="*"
RUBY_TARGETS="ruby19"
PYTHON_TARGETS="jython2_5 pypy1_8 pypy1_9 python2_5 python2_6 python2_7 python3_1 python3_2"
USE_PYTHON='2.6 2.7 3.2'
|
.config
[quote]
#
# Automatically generated file; DO NOT EDIT.
# Linux/x86 3.10.7-gentoo Kernel Configuration
#
#
# Gentoo Linux
#
CONFIG_GENTOO_LINUX=y
CONFIG_GENTOO_LINUX_UDEV=y
#
# Support for init systems, system and service managers
#
CONFIG_GENTOO_LINUX_INIT_SCRIPT=y
# CONFIG_GENTOO_LINUX_INIT_SYSTEMD is not set
CONFIG_64BIT=y
CONFIG_X86_64=y
CONFIG_X86=y
CONFIG_INSTRUCTION_DECODER=y
CONFIG_OUTPUT_FORMAT="elf64-x86-64"
CONFIG_ARCH_DEFCONFIG="arch/x86/configs/x86_64_defconfig"
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_MMU=y
CONFIG_NEED_DMA_MAP_STATE=y
CONFIG_NEED_SG_DMA_LENGTH=y
CONFIG_GENERIC_ISA_DMA=y
CONFIG_GENERIC_BUG=y
CONFIG_GENERIC_BUG_RELATIVE_POINTERS=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_ARCH_HAS_CPU_RELAX=y
CONFIG_ARCH_HAS_CACHE_LINE_SIZE=y
CONFIG_ARCH_HAS_CPU_AUTOPROBE=y
CONFIG_HAVE_SETUP_PER_CPU_AREA=y
CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK=y
CONFIG_NEED_PER_CPU_PAGE_FIRST_CHUNK=y
CONFIG_ARCH_HIBERNATION_POSSIBLE=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
CONFIG_ZONE_DMA32=y
CONFIG_AUDIT_ARCH=y
CONFIG_ARCH_SUPPORTS_OPTIMIZED_INLINING=y
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_X86_64_SMP=y
CONFIG_X86_HT=y
CONFIG_ARCH_HWEIGHT_CFLAGS="-fcall-saved-rdi -fcall-saved-rsi -fcall-saved-rdx -fcall-saved-rcx -fcall-saved-r8 -fcall-saved-r9 -fcall-saved-r10 -fcall-saved-r11"
CONFIG_ARCH_SUPPORTS_UPROBES=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
CONFIG_IRQ_WORK=y
CONFIG_BUILDTIME_EXTABLE_SORT=y
#
# General setup
#
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_CROSS_COMPILE=""
CONFIG_LOCALVERSION=""
# CONFIG_LOCALVERSION_AUTO is not set
CONFIG_HAVE_KERNEL_GZIP=y
CONFIG_HAVE_KERNEL_BZIP2=y
CONFIG_HAVE_KERNEL_LZMA=y
CONFIG_HAVE_KERNEL_XZ=y
CONFIG_HAVE_KERNEL_LZO=y
CONFIG_KERNEL_GZIP=y
# CONFIG_KERNEL_BZIP2 is not set
# CONFIG_KERNEL_LZMA is not set
# CONFIG_KERNEL_XZ is not set
# CONFIG_KERNEL_LZO is not set
CONFIG_DEFAULT_HOSTNAME="(none)"
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
# CONFIG_POSIX_MQUEUE is not set
# CONFIG_FHANDLE is not set
CONFIG_AUDIT=y
CONFIG_AUDITSYSCALL=y
CONFIG_AUDIT_WATCH=y
CONFIG_AUDIT_TREE=y
# CONFIG_AUDIT_LOGINUID_IMMUTABLE is not set
CONFIG_HAVE_GENERIC_HARDIRQS=y
#
# IRQ subsystem
#
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_GENERIC_IRQ_SHOW=y
CONFIG_GENERIC_PENDING_IRQ=y
CONFIG_IRQ_FORCED_THREADING=y
CONFIG_SPARSE_IRQ=y
CONFIG_CLOCKSOURCE_WATCHDOG=y
CONFIG_ARCH_CLOCKSOURCE_DATA=y
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
CONFIG_GENERIC_CLOCKEVENTS_MIN_ADJUST=y
CONFIG_GENERIC_CMOS_UPDATE=y
#
# Timers subsystem
#
CONFIG_HZ_PERIODIC=y
# CONFIG_NO_HZ_IDLE is not set
# CONFIG_NO_HZ_FULL is not set
# CONFIG_NO_HZ is not set
# CONFIG_HIGH_RES_TIMERS is not set
#
# CPU/Task time and stats accounting
#
CONFIG_TICK_CPU_ACCOUNTING=y
# CONFIG_VIRT_CPU_ACCOUNTING_GEN is not set
# CONFIG_IRQ_TIME_ACCOUNTING is not set
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
#
# RCU Subsystem
#
CONFIG_TREE_RCU=y
# CONFIG_PREEMPT_RCU is not set
CONFIG_RCU_STALL_COMMON=y
# CONFIG_RCU_USER_QS is not set
CONFIG_RCU_FANOUT=64
CONFIG_RCU_FANOUT_LEAF=16
# CONFIG_RCU_FANOUT_EXACT is not set
# CONFIG_TREE_RCU_TRACE is not set
# CONFIG_RCU_NOCB_CPU is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=15
CONFIG_HAVE_UNSTABLE_SCHED_CLOCK=y
CONFIG_ARCH_SUPPORTS_NUMA_BALANCING=y
CONFIG_ARCH_WANTS_PROT_NUMA_PROT_NONE=y
# CONFIG_CGROUPS is not set
# CONFIG_CHECKPOINT_RESTORE is not set
# CONFIG_NAMESPACES is not set
# CONFIG_SCHED_AUTOGROUP is not set
# CONFIG_SYSFS_DEPRECATED is not set
# CONFIG_RELAY is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
CONFIG_RD_GZIP=y
# CONFIG_RD_BZIP2 is not set
# CONFIG_RD_LZMA is not set
# CONFIG_RD_XZ is not set
# CONFIG_RD_LZO is not set
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_SYSCTL=y
CONFIG_ANON_INODES=y
CONFIG_HAVE_UID16=y
CONFIG_SYSCTL_EXCEPTION_TRACE=y
CONFIG_HOTPLUG=y
CONFIG_HAVE_PCSPKR_PLATFORM=y
CONFIG_EXPERT=y
# CONFIG_UID16 is not set
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_PCSPKR_PLATFORM=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
CONFIG_PCI_QUIRKS=y
CONFIG_EMBEDDED=y
CONFIG_HAVE_PERF_EVENTS=y
#
# Kernel Performance Events And Counters
#
CONFIG_PERF_EVENTS=y
# CONFIG_DEBUG_PERF_USE_VMALLOC is not set
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_COMPAT_BRK=y
CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
CONFIG_HAVE_OPROFILE=y
CONFIG_OPROFILE_NMI_TIMER=y
# CONFIG_KPROBES is not set
# CONFIG_JUMP_LABEL is not set
# CONFIG_HAVE_64BIT_ALIGNED_ACCESS is not set
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_ARCH_USE_BUILTIN_BSWAP=y
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_OPTPROBES=y
CONFIG_HAVE_KPROBES_ON_FTRACE=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_DMA_ATTRS=y
CONFIG_USE_GENERIC_SMP_HELPERS=y
CONFIG_GENERIC_SMP_IDLE_THREAD=y
CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
CONFIG_HAVE_DMA_API_DEBUG=y
CONFIG_HAVE_HW_BREAKPOINT=y
CONFIG_HAVE_MIXED_BREAKPOINTS_REGS=y
CONFIG_HAVE_USER_RETURN_NOTIFIER=y
CONFIG_HAVE_PERF_EVENTS_NMI=y
CONFIG_HAVE_PERF_REGS=y
CONFIG_HAVE_PERF_USER_STACK_DUMP=y
CONFIG_HAVE_ARCH_JUMP_LABEL=y
CONFIG_ARCH_HAVE_NMI_SAFE_CMPXCHG=y
CONFIG_HAVE_CMPXCHG_LOCAL=y
CONFIG_HAVE_CMPXCHG_DOUBLE=y
CONFIG_ARCH_WANT_COMPAT_IPC_PARSE_VERSION=y
CONFIG_ARCH_WANT_OLD_COMPAT_IPC=y
CONFIG_HAVE_ARCH_SECCOMP_FILTER=y
CONFIG_SECCOMP_FILTER=y
CONFIG_HAVE_CONTEXT_TRACKING=y
CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y
CONFIG_HAVE_ARCH_TRANSPARENT_HUGEPAGE=y
CONFIG_MODULES_USE_ELF_RELA=y
CONFIG_OLD_SIGSUSPEND3=y
CONFIG_COMPAT_OLD_SIGACTION=y
#
# GCOV-based kernel profiling
#
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
CONFIG_MODVERSIONS=y
# CONFIG_MODULE_SRCVERSION_ALL is not set
# CONFIG_MODULE_SIG is not set
CONFIG_STOP_MACHINE=y
CONFIG_BLOCK=y
CONFIG_BLK_DEV_BSG=y
CONFIG_BLK_DEV_BSGLIB=y
# CONFIG_BLK_DEV_INTEGRITY is not set
#
# Partition Types
#
CONFIG_PARTITION_ADVANCED=y
# CONFIG_ACORN_PARTITION is not set
# CONFIG_OSF_PARTITION is not set
# CONFIG_AMIGA_PARTITION is not set
# CONFIG_ATARI_PARTITION is not set
CONFIG_MAC_PARTITION=y
CONFIG_MSDOS_PARTITION=y
CONFIG_BSD_DISKLABEL=y
# CONFIG_MINIX_SUBPARTITION is not set
CONFIG_SOLARIS_X86_PARTITION=y
# CONFIG_UNIXWARE_DISKLABEL is not set
CONFIG_LDM_PARTITION=y
# CONFIG_LDM_DEBUG is not set
# CONFIG_SGI_PARTITION is not set
# CONFIG_ULTRIX_PARTITION is not set
# CONFIG_SUN_PARTITION is not set
# CONFIG_KARMA_PARTITION is not set
CONFIG_EFI_PARTITION=y
# CONFIG_SYSV68_PARTITION is not set
CONFIG_BLOCK_COMPAT=y
#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_DEADLINE=y
# CONFIG_IOSCHED_CFQ is not set
# CONFIG_IOSCHED_BFQ is not set
CONFIG_DEFAULT_DEADLINE=y
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="deadline"
CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
CONFIG_INLINE_READ_UNLOCK=y
CONFIG_INLINE_READ_UNLOCK_IRQ=y
CONFIG_INLINE_WRITE_UNLOCK=y
CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
CONFIG_MUTEX_SPIN_ON_OWNER=y
# CONFIG_FREEZER is not set
#
# Processor type and features
#
CONFIG_ZONE_DMA=y
CONFIG_SMP=y
CONFIG_X86_MPPARSE=y
CONFIG_X86_EXTENDED_PLATFORM=y
# CONFIG_X86_VSMP is not set
# CONFIG_X86_INTEL_LPSS is not set
CONFIG_X86_SUPPORTS_MEMORY_FAILURE=y
CONFIG_SCHED_OMIT_FRAME_POINTER=y
# CONFIG_HYPERVISOR_GUEST is not set
CONFIG_NO_BOOTMEM=y
# CONFIG_MEMTEST is not set
# CONFIG_MK8 is not set
# CONFIG_MPSC is not set
# CONFIG_MCORE2 is not set
# CONFIG_MATOM is not set
CONFIG_GENERIC_CPU=y
CONFIG_X86_INTERNODE_CACHE_SHIFT=6
CONFIG_X86_L1_CACHE_SHIFT=6
CONFIG_X86_TSC=y
CONFIG_X86_CMPXCHG64=y
CONFIG_X86_CMOV=y
CONFIG_X86_MINIMUM_CPU_FAMILY=64
CONFIG_X86_DEBUGCTLMSR=y
# CONFIG_PROCESSOR_SELECT is not set
CONFIG_CPU_SUP_INTEL=y
CONFIG_CPU_SUP_AMD=y
CONFIG_CPU_SUP_CENTAUR=y
CONFIG_HPET_TIMER=y
CONFIG_DMI=y
CONFIG_GART_IOMMU=y
# CONFIG_CALGARY_IOMMU is not set
CONFIG_SWIOTLB=y
CONFIG_IOMMU_HELPER=y
# CONFIG_MAXSMP is not set
CONFIG_NR_CPUS=64
CONFIG_SCHED_SMT=y
CONFIG_SCHED_MC=y
CONFIG_PREEMPT_NONE=y
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
CONFIG_X86_LOCAL_APIC=y
CONFIG_X86_IO_APIC=y
# CONFIG_X86_REROUTE_FOR_BROKEN_BOOT_IRQS is not set
CONFIG_X86_MCE=y
CONFIG_X86_MCE_INTEL=y
CONFIG_X86_MCE_AMD=y
CONFIG_X86_MCE_THRESHOLD=y
# CONFIG_X86_MCE_INJECT is not set
CONFIG_X86_THERMAL_VECTOR=y
CONFIG_I8K=m
# CONFIG_MICROCODE is not set
# CONFIG_X86_MSR is not set
# CONFIG_X86_CPUID is not set
CONFIG_ARCH_PHYS_ADDR_T_64BIT=y
CONFIG_ARCH_DMA_ADDR_T_64BIT=y
# CONFIG_DIRECT_GBPAGES is not set
# CONFIG_NUMA is not set
CONFIG_ARCH_SPARSEMEM_ENABLE=y
CONFIG_ARCH_SPARSEMEM_DEFAULT=y
CONFIG_ARCH_SELECT_MEMORY_MODEL=y
CONFIG_ILLEGAL_POINTER_VALUE=0xdead000000000000
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_SPARSEMEM_MANUAL=y
CONFIG_SPARSEMEM=y
CONFIG_HAVE_MEMORY_PRESENT=y
CONFIG_SPARSEMEM_EXTREME=y
CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y
CONFIG_SPARSEMEM_ALLOC_MEM_MAP_TOGETHER=y
CONFIG_SPARSEMEM_VMEMMAP=y
CONFIG_HAVE_MEMBLOCK=y
CONFIG_HAVE_MEMBLOCK_NODE_MAP=y
CONFIG_ARCH_DISCARD_MEMBLOCK=y
# CONFIG_HAVE_BOOTMEM_INFO_NODE is not set
# CONFIG_MEMORY_HOTPLUG is not set
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_COMPACTION is not set
CONFIG_PHYS_ADDR_T_64BIT=y
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_ARCH_SUPPORTS_MEMORY_FAILURE=y
# CONFIG_MEMORY_FAILURE is not set
# CONFIG_TRANSPARENT_HUGEPAGE is not set
CONFIG_CROSS_MEMORY_ATTACH=y
# CONFIG_CLEANCACHE is not set
# CONFIG_FRONTSWAP is not set
# CONFIG_X86_CHECK_BIOS_CORRUPTION is not set
CONFIG_X86_RESERVE_LOW=64
CONFIG_MTRR=y
# CONFIG_MTRR_SANITIZER is not set
# CONFIG_X86_PAT is not set
CONFIG_ARCH_RANDOM=y
CONFIG_X86_SMAP=y
CONFIG_EFI=y
# CONFIG_EFI_STUB is not set
CONFIG_SECCOMP=y
# CONFIG_CC_STACKPROTECTOR is not set
CONFIG_HZ_100=y
# CONFIG_HZ_250 is not set
# CONFIG_HZ_300 is not set
# CONFIG_HZ_1000 is not set
CONFIG_HZ=100
# CONFIG_SCHED_HRTICK is not set
# CONFIG_KEXEC is not set
# CONFIG_CRASH_DUMP is not set
CONFIG_PHYSICAL_START=0x200000
CONFIG_RELOCATABLE=y
CONFIG_PHYSICAL_ALIGN=0x1000000
# CONFIG_HOTPLUG_CPU is not set
# CONFIG_COMPAT_VDSO is not set
# CONFIG_CMDLINE_BOOL is not set
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
#
# Power management and ACPI options
#
# CONFIG_SUSPEND is not set
# CONFIG_HIBERNATION is not set
CONFIG_PM_RUNTIME=y
CONFIG_PM=y
# CONFIG_PM_DEBUG is not set
CONFIG_ACPI=y
# CONFIG_ACPI_PROCFS is not set
# CONFIG_ACPI_PROCFS_POWER is not set
# CONFIG_ACPI_EC_DEBUGFS is not set
CONFIG_ACPI_PROC_EVENT=y
CONFIG_ACPI_AC=y
CONFIG_ACPI_BATTERY=y
CONFIG_ACPI_BUTTON=y
CONFIG_ACPI_VIDEO=y
CONFIG_ACPI_FAN=m
CONFIG_ACPI_DOCK=y
CONFIG_ACPI_I2C=y
CONFIG_ACPI_PROCESSOR=m
# CONFIG_ACPI_IPMI is not set
# CONFIG_ACPI_PROCESSOR_AGGREGATOR is not set
CONFIG_ACPI_THERMAL=m
# CONFIG_ACPI_CUSTOM_DSDT is not set
# CONFIG_ACPI_INITRD_TABLE_OVERRIDE is not set
CONFIG_ACPI_BLACKLIST_YEAR=0
# CONFIG_ACPI_DEBUG is not set
# CONFIG_ACPI_PCI_SLOT is not set
CONFIG_X86_PM_TIMER=y
# CONFIG_ACPI_CONTAINER is not set
# CONFIG_ACPI_SBS is not set
# CONFIG_ACPI_HED is not set
# CONFIG_ACPI_BGRT is not set
# CONFIG_ACPI_APEI is not set
# CONFIG_SFI is not set
#
# CPU Frequency scaling
#
CONFIG_CPU_FREQ=y
CONFIG_CPU_FREQ_TABLE=y
CONFIG_CPU_FREQ_GOV_COMMON=y
CONFIG_CPU_FREQ_STAT=m
# CONFIG_CPU_FREQ_STAT_DETAILS is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
CONFIG_CPU_FREQ_GOV_POWERSAVE=y
CONFIG_CPU_FREQ_GOV_USERSPACE=y
CONFIG_CPU_FREQ_GOV_ONDEMAND=y
CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y
#
# x86 CPU frequency scaling drivers
#
# CONFIG_X86_INTEL_PSTATE is not set
# CONFIG_X86_PCC_CPUFREQ is not set
CONFIG_X86_ACPI_CPUFREQ=m
CONFIG_X86_ACPI_CPUFREQ_CPB=y
CONFIG_X86_POWERNOW_K8=m
# CONFIG_X86_AMD_FREQ_SENSITIVITY is not set
CONFIG_X86_SPEEDSTEP_CENTRINO=m
CONFIG_X86_P4_CLOCKMOD=m
#
# shared options
#
CONFIG_X86_SPEEDSTEP_LIB=m
CONFIG_CPU_IDLE=y
# CONFIG_CPU_IDLE_MULTIPLE_DRIVERS is not set
CONFIG_CPU_IDLE_GOV_LADDER=y
# CONFIG_ARCH_NEEDS_CPU_IDLE_COUPLED is not set
CONFIG_INTEL_IDLE=y
#
# Memory power savings
#
# CONFIG_I7300_IDLE is not set
#
# Bus options (PCI etc.)
#
CONFIG_PCI=y
CONFIG_PCI_DIRECT=y
CONFIG_PCI_MMCONFIG=y
CONFIG_PCI_DOMAINS=y
# CONFIG_PCI_CNB20LE_QUIRK is not set
CONFIG_PCIEPORTBUS=y
CONFIG_PCIEAER=y
# CONFIG_PCIE_ECRC is not set
# CONFIG_PCIEAER_INJECT is not set
# CONFIG_PCIEASPM is not set
CONFIG_PCIE_PME=y
CONFIG_ARCH_SUPPORTS_MSI=y
# CONFIG_PCI_MSI is not set
# CONFIG_PCI_DEBUG is not set
# CONFIG_PCI_REALLOC_ENABLE_AUTO is not set
# CONFIG_PCI_STUB is not set
CONFIG_HT_IRQ=y
# CONFIG_PCI_IOV is not set
# CONFIG_PCI_PRI is not set
# CONFIG_PCI_PASID is not set
CONFIG_PCI_IOAPIC=y
CONFIG_PCI_LABEL=y
CONFIG_ISA_DMA_API=y
CONFIG_AMD_NB=y
CONFIG_PCCARD=m
CONFIG_PCMCIA=m
CONFIG_PCMCIA_LOAD_CIS=y
CONFIG_CARDBUS=y
#
# PC-card bridges
#
CONFIG_YENTA=m
CONFIG_YENTA_O2=y
CONFIG_YENTA_RICOH=y
CONFIG_YENTA_TI=y
CONFIG_YENTA_ENE_TUNE=y
CONFIG_YENTA_TOSHIBA=y
CONFIG_PD6729=m
CONFIG_I82092=m
CONFIG_PCCARD_NONSTATIC=y
# CONFIG_HOTPLUG_PCI is not set
# CONFIG_RAPIDIO is not set
#
# Executable file formats / Emulations
#
CONFIG_BINFMT_ELF=y
CONFIG_COMPAT_BINFMT_ELF=y
CONFIG_ARCH_BINFMT_ELF_RANDOMIZE_PIE=y
# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
CONFIG_BINFMT_SCRIPT=y
# CONFIG_HAVE_AOUT is not set
# CONFIG_BINFMT_MISC is not set
CONFIG_COREDUMP=y
CONFIG_IA32_EMULATION=y
CONFIG_IA32_AOUT=y
# CONFIG_X86_X32 is not set
CONFIG_COMPAT=y
CONFIG_COMPAT_FOR_U64_ALIGNMENT=y
CONFIG_SYSVIPC_COMPAT=y
CONFIG_KEYS_COMPAT=y
CONFIG_HAVE_TEXT_POKE_SMP=y
CONFIG_X86_DEV_DMA_OPS=y
CONFIG_NET=y
CONFIG_COMPAT_NETLINK_MESSAGES=y
#
# Networking options
#
CONFIG_PACKET=y
# CONFIG_PACKET_DIAG is not set
CONFIG_UNIX=y
# CONFIG_UNIX_DIAG is not set
CONFIG_XFRM=y
CONFIG_XFRM_ALGO=m
CONFIG_XFRM_USER=m
# CONFIG_XFRM_SUB_POLICY is not set
# CONFIG_XFRM_MIGRATE is not set
# CONFIG_XFRM_STATISTICS is not set
CONFIG_XFRM_IPCOMP=m
CONFIG_NET_KEY=m
# CONFIG_NET_KEY_MIGRATE is not set
CONFIG_INET=y
# CONFIG_IP_MULTICAST is not set
# CONFIG_IP_ADVANCED_ROUTER is not set
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
# CONFIG_IP_PNP_BOOTP is not set
# CONFIG_IP_PNP_RARP is not set
CONFIG_NET_IPIP=m
# CONFIG_NET_IPGRE_DEMUX is not set
CONFIG_NET_IP_TUNNEL=m
# CONFIG_ARPD is not set
# CONFIG_SYN_COOKIES is not set
# CONFIG_NET_IPVTI is not set
CONFIG_INET_AH=m
CONFIG_INET_ESP=m
CONFIG_INET_IPCOMP=m
CONFIG_INET_XFRM_TUNNEL=m
CONFIG_INET_TUNNEL=m
CONFIG_INET_XFRM_MODE_TRANSPORT=m
CONFIG_INET_XFRM_MODE_TUNNEL=m
CONFIG_INET_XFRM_MODE_BEET=m
CONFIG_INET_LRO=y
# CONFIG_INET_DIAG is not set
# CONFIG_TCP_CONG_ADVANCED is not set
CONFIG_TCP_CONG_CUBIC=y
CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_TCP_MD5SIG is not set
CONFIG_IPV6=m
CONFIG_IPV6_PRIVACY=y
# CONFIG_IPV6_ROUTER_PREF is not set
# CONFIG_IPV6_OPTIMISTIC_DAD is not set
CONFIG_INET6_AH=m
CONFIG_INET6_ESP=m
CONFIG_INET6_IPCOMP=m
# CONFIG_IPV6_MIP6 is not set
CONFIG_INET6_XFRM_TUNNEL=m
CONFIG_INET6_TUNNEL=m
CONFIG_INET6_XFRM_MODE_TRANSPORT=m
CONFIG_INET6_XFRM_MODE_TUNNEL=m
CONFIG_INET6_XFRM_MODE_BEET=m
CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m
CONFIG_IPV6_SIT=m
# CONFIG_IPV6_SIT_6RD is not set
CONFIG_IPV6_NDISC_NODETYPE=y
CONFIG_IPV6_TUNNEL=m
# CONFIG_IPV6_GRE is not set
# CONFIG_IPV6_MULTIPLE_TABLES is not set
# CONFIG_IPV6_MROUTE is not set
# CONFIG_NETWORK_SECMARK is not set
# CONFIG_NETWORK_PHY_TIMESTAMPING is not set
# CONFIG_NETFILTER is not set
# CONFIG_IP_DCCP is not set
CONFIG_IP_SCTP=m
# CONFIG_SCTP_DBG_MSG is not set
# CONFIG_SCTP_DBG_OBJCNT is not set
CONFIG_SCTP_DEFAULT_COOKIE_HMAC_MD5=y
# CONFIG_SCTP_DEFAULT_COOKIE_HMAC_SHA1 is not set
# CONFIG_SCTP_DEFAULT_COOKIE_HMAC_NONE is not set
CONFIG_SCTP_COOKIE_HMAC_MD5=y
# CONFIG_SCTP_COOKIE_HMAC_SHA1 is not set
# CONFIG_RDS is not set
# CONFIG_TIPC is not set
CONFIG_ATM=m
CONFIG_ATM_CLIP=m
# CONFIG_ATM_CLIP_NO_ICMP is not set
CONFIG_ATM_LANE=m
CONFIG_ATM_MPOA=m
CONFIG_ATM_BR2684=m
# CONFIG_ATM_BR2684_IPFILTER is not set
# CONFIG_L2TP is not set
CONFIG_STP=m
CONFIG_BRIDGE=m
CONFIG_BRIDGE_IGMP_SNOOPING=y
CONFIG_BRIDGE_VLAN_FILTERING=y
CONFIG_HAVE_NET_DSA=y
CONFIG_VLAN_8021Q=m
# CONFIG_VLAN_8021Q_GVRP is not set
# CONFIG_VLAN_8021Q_MVRP is not set
# CONFIG_DECNET is not set
CONFIG_LLC=m
# CONFIG_LLC2 is not set
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_PHONET is not set
# CONFIG_IEEE802154 is not set
# CONFIG_NET_SCHED is not set
# CONFIG_DCB is not set
CONFIG_DNS_RESOLVER=y
# CONFIG_BATMAN_ADV is not set
# CONFIG_OPENVSWITCH is not set
# CONFIG_VSOCKETS is not set
# CONFIG_NETLINK_MMAP is not set
# CONFIG_NETLINK_DIAG is not set
CONFIG_RPS=y
CONFIG_RFS_ACCEL=y
CONFIG_XPS=y
CONFIG_BQL=y
# CONFIG_BPF_JIT is not set
#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_HAMRADIO is not set
# CONFIG_CAN is not set
# CONFIG_IRDA is not set
CONFIG_BT=m
# CONFIG_BT_RFCOMM is not set
# CONFIG_BT_BNEP is not set
# CONFIG_BT_HIDP is not set
#
# Bluetooth device drivers
#
CONFIG_BT_HCIBTUSB=m
CONFIG_BT_HCIUART=m
CONFIG_BT_HCIUART_H4=y
CONFIG_BT_HCIUART_BCSP=y
# CONFIG_BT_HCIUART_ATH3K is not set
CONFIG_BT_HCIUART_LL=y
# CONFIG_BT_HCIUART_3WIRE is not set
CONFIG_BT_HCIBCM203X=m
CONFIG_BT_HCIBPA10X=m
CONFIG_BT_HCIBFUSB=m
CONFIG_BT_HCIDTL1=m
CONFIG_BT_HCIBT3C=m
CONFIG_BT_HCIBLUECARD=m
CONFIG_BT_HCIBTUART=m
CONFIG_BT_HCIVHCI=m
# CONFIG_BT_MRVL is not set
# CONFIG_BT_ATH3K is not set
# CONFIG_AF_RXRPC is not set
CONFIG_WIRELESS=y
CONFIG_WIRELESS_EXT=y
CONFIG_WEXT_CORE=y
CONFIG_WEXT_PROC=y
CONFIG_WEXT_SPY=y
CONFIG_WEXT_PRIV=y
CONFIG_CFG80211=m
# CONFIG_NL80211_TESTMODE is not set
# CONFIG_CFG80211_DEVELOPER_WARNINGS is not set
# CONFIG_CFG80211_REG_DEBUG is not set
# CONFIG_CFG80211_CERTIFICATION_ONUS is not set
CONFIG_CFG80211_DEFAULT_PS=y
# CONFIG_CFG80211_INTERNAL_REGDB is not set
CONFIG_CFG80211_WEXT=y
CONFIG_LIB80211=m
CONFIG_LIB80211_CRYPT_WEP=m
CONFIG_LIB80211_CRYPT_CCMP=m
CONFIG_LIB80211_CRYPT_TKIP=m
# CONFIG_LIB80211_DEBUG is not set
CONFIG_MAC80211=m
CONFIG_MAC80211_HAS_RC=y
CONFIG_MAC80211_RC_PID=y
# CONFIG_MAC80211_RC_MINSTREL is not set
CONFIG_MAC80211_RC_DEFAULT_PID=y
CONFIG_MAC80211_RC_DEFAULT="pid"
# CONFIG_MAC80211_MESH is not set
CONFIG_MAC80211_LEDS=y
# CONFIG_MAC80211_MESSAGE_TRACING is not set
# CONFIG_MAC80211_DEBUG_MENU is not set
# CONFIG_WIMAX is not set
CONFIG_RFKILL=m
CONFIG_RFKILL_LEDS=y
# CONFIG_RFKILL_INPUT is not set
# CONFIG_NET_9P is not set
# CONFIG_CAIF is not set
# CONFIG_CEPH_LIB is not set
# CONFIG_NFC is not set
CONFIG_HAVE_BPF_JIT=y
#
# Device Drivers
#
#
# Generic Driver Options
#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_DEVTMPFS=y
# CONFIG_DEVTMPFS_MOUNT is not set
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=m
CONFIG_FIRMWARE_IN_KERNEL=y
CONFIG_EXTRA_FIRMWARE=""
CONFIG_FW_LOADER_USER_HELPER=y
# CONFIG_DEBUG_DRIVER is not set
# CONFIG_DEBUG_DEVRES is not set
# CONFIG_SYS_HYPERVISOR is not set
# CONFIG_GENERIC_CPU_DEVICES is not set
CONFIG_REGMAP=y
CONFIG_REGMAP_I2C=m
CONFIG_DMA_SHARED_BUFFER=y
#
# Bus devices
#
# CONFIG_CONNECTOR is not set
# CONFIG_MTD is not set
# CONFIG_PARPORT is not set
CONFIG_PNP=y
# CONFIG_PNP_DEBUG_MESSAGES is not set
#
# Protocols
#
CONFIG_PNPACPI=y
CONFIG_BLK_DEV=y
CONFIG_BLK_DEV_FD=m
# CONFIG_BLK_DEV_PCIESSD_MTIP32XX is not set
CONFIG_BLK_CPQ_DA=m
CONFIG_BLK_CPQ_CISS_DA=m
# CONFIG_CISS_SCSI_TAPE is not set
CONFIG_BLK_DEV_DAC960=m
CONFIG_BLK_DEV_UMEM=m
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_LOOP_MIN_COUNT=8
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
# CONFIG_BLK_DEV_DRBD is not set
CONFIG_BLK_DEV_NBD=m
# CONFIG_BLK_DEV_NVME is not set
CONFIG_BLK_DEV_SX8=m
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=8192
# CONFIG_BLK_DEV_XIP is not set
# CONFIG_CDROM_PKTCDVD is not set
CONFIG_ATA_OVER_ETH=y
CONFIG_VIRTIO_BLK=m
# CONFIG_BLK_DEV_HD is not set
# CONFIG_BLK_DEV_RBD is not set
# CONFIG_BLK_DEV_RSXX is not set
#
# Misc devices
#
# CONFIG_SENSORS_LIS3LV02D is not set
# CONFIG_AD525X_DPOT is not set
# CONFIG_DUMMY_IRQ is not set
# CONFIG_IBM_ASM is not set
# CONFIG_PHANTOM is not set
# CONFIG_INTEL_MID_PTI is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
# CONFIG_ICS932S401 is not set
# CONFIG_ATMEL_SSC is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
# CONFIG_APDS9802ALS is not set
# CONFIG_ISL29003 is not set
# CONFIG_ISL29020 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_SENSORS_BH1780 is not set
# CONFIG_SENSORS_BH1770 is not set
# CONFIG_SENSORS_APDS990X is not set
# CONFIG_HMC6352 is not set
# CONFIG_DS1682 is not set
# CONFIG_BMP085_I2C is not set
# CONFIG_PCH_PHUB is not set
# CONFIG_USB_SWITCH_FSA9480 is not set
# CONFIG_SRAM is not set
# CONFIG_C2PORT is not set
#
# EEPROM support
#
# CONFIG_EEPROM_AT24 is not set
# CONFIG_EEPROM_LEGACY is not set
# CONFIG_EEPROM_MAX6875 is not set
CONFIG_EEPROM_93CX6=m
# CONFIG_CB710_CORE is not set
#
# Texas Instruments shared transport line discipline
#
# CONFIG_SENSORS_LIS3_I2C is not set
#
# Altera FPGA firmware download module
#
# CONFIG_ALTERA_STAPL is not set
# CONFIG_VMWARE_VMCI is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
#
# SCSI device support
#
CONFIG_SCSI_MOD=y
CONFIG_RAID_ATTRS=m
CONFIG_SCSI=y
CONFIG_SCSI_DMA=y
CONFIG_SCSI_TGT=m
CONFIG_SCSI_NETLINK=y
CONFIG_SCSI_PROC_FS=y
#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=y
# CONFIG_CHR_DEV_ST is not set
# CONFIG_CHR_DEV_OSST is not set
CONFIG_BLK_DEV_SR=y
CONFIG_BLK_DEV_SR_VENDOR=y
CONFIG_CHR_DEV_SG=m
CONFIG_CHR_DEV_SCH=y
CONFIG_SCSI_MULTI_LUN=y
CONFIG_SCSI_CONSTANTS=y
CONFIG_SCSI_LOGGING=y
CONFIG_SCSI_SCAN_ASYNC=y
#
# SCSI Transports
#
CONFIG_SCSI_SPI_ATTRS=y
CONFIG_SCSI_FC_ATTRS=y
CONFIG_SCSI_ISCSI_ATTRS=y
CONFIG_SCSI_SAS_ATTRS=y
CONFIG_SCSI_SAS_LIBSAS=y
# CONFIG_SCSI_SAS_ATA is not set
CONFIG_SCSI_SAS_HOST_SMP=y
CONFIG_SCSI_SRP_ATTRS=m
CONFIG_SCSI_SRP_TGT_ATTRS=y
CONFIG_SCSI_LOWLEVEL=y
CONFIG_ISCSI_TCP=y
CONFIG_ISCSI_BOOT_SYSFS=m
# CONFIG_SCSI_CXGB3_ISCSI is not set
# CONFIG_SCSI_CXGB4_ISCSI is not set
# CONFIG_SCSI_BNX2_ISCSI is not set
# CONFIG_SCSI_BNX2X_FCOE is not set
# CONFIG_BE2ISCSI is not set
CONFIG_BLK_DEV_3W_XXXX_RAID=m
# CONFIG_SCSI_HPSA is not set
CONFIG_SCSI_3W_9XXX=m
# CONFIG_SCSI_3W_SAS is not set
CONFIG_SCSI_ACARD=m
CONFIG_SCSI_AACRAID=m
CONFIG_SCSI_AIC7XXX=y
CONFIG_AIC7XXX_CMDS_PER_DEVICE=32
CONFIG_AIC7XXX_RESET_DELAY_MS=15000
# CONFIG_AIC7XXX_DEBUG_ENABLE is not set
CONFIG_AIC7XXX_DEBUG_MASK=0
CONFIG_AIC7XXX_REG_PRETTY_PRINT=y
# CONFIG_SCSI_AIC7XXX_OLD is not set
CONFIG_SCSI_AIC79XX=y
CONFIG_AIC79XX_CMDS_PER_DEVICE=32
CONFIG_AIC79XX_RESET_DELAY_MS=15000
# CONFIG_AIC79XX_DEBUG_ENABLE is not set
CONFIG_AIC79XX_DEBUG_MASK=0
CONFIG_AIC79XX_REG_PRETTY_PRINT=y
CONFIG_SCSI_AIC94XX=m
# CONFIG_AIC94XX_DEBUG is not set
CONFIG_SCSI_MVSAS=m
CONFIG_SCSI_MVSAS_DEBUG=y
# CONFIG_SCSI_MVSAS_TASKLET is not set
# CONFIG_SCSI_MVUMI is not set
CONFIG_SCSI_DPT_I2O=m
CONFIG_SCSI_ADVANSYS=m
CONFIG_SCSI_ARCMSR=m
CONFIG_MEGARAID_NEWGEN=y
CONFIG_MEGARAID_MM=m
CONFIG_MEGARAID_MAILBOX=m
CONFIG_MEGARAID_LEGACY=m
CONFIG_MEGARAID_SAS=m
# CONFIG_SCSI_MPT2SAS is not set
# CONFIG_SCSI_MPT3SAS is not set
# CONFIG_SCSI_UFSHCD is not set
CONFIG_SCSI_HPTIOP=m
CONFIG_SCSI_BUSLOGIC=m
# CONFIG_VMWARE_PVSCSI is not set
# CONFIG_LIBFC is not set
# CONFIG_LIBFCOE is not set
# CONFIG_FCOE is not set
# CONFIG_FCOE_FNIC is not set
CONFIG_SCSI_DMX3191D=y
CONFIG_SCSI_EATA=m
CONFIG_SCSI_EATA_TAGGED
Last edited by jkagen on Sun Oct 06, 2013 6:54 pm; edited 1 time in total |
|
| Back to top |
|
 |
jkagen
n00b
Joined: 29 Jul 2008
Posts: 42
|
| Posted: Thu Oct 03, 2013 1:35 pm Post subject: |
|
|
and this is Xorg.0.log after x started (one of the rare occasions)
| Quote: |
[ 2835.149]
X.Org X Server 1.14.3
Release Date: 2013-09-12
[ 2835.149] X Protocol Version 11, Revision 0
[ 2835.149] Build Operating System: Linux 3.10.7-gentoo x86_64 Gentoo
[ 2835.149] Current Operating System: Linux eaglespeak 3.10.7-gentoo #1 SMP Wed Oct 2 14:45:22 MDT 2013 x86_64
[ 2835.149] Kernel command line: root=/dev/sda1 quiet udev
[ 2835.149] Build Date: 03 October 2013 07:44:38AM
[ 2835.149]
[ 2835.149] Current version of pixman: 0.30.2
[ 2835.149] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 2835.149] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 2835.150] (==) Log file: "/var/log/Xorg.0.log", Time: Thu Oct 3 08:49:03 2013
[ 2835.150] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 2835.150] (==) No Layout section. Using the first Screen section.
[ 2835.150] (==) No screen section available. Using defaults.
[ 2835.150] (**) |-->Screen "Default Screen Section" (0)
[ 2835.150] (**) | |-->Monitor "<default monitor>"
[ 2835.150] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 2835.150] (==) Automatically adding devices
[ 2835.150] (==) Automatically enabling devices
[ 2835.150] (==) Automatically adding GPU devices
[ 2835.150] (WW) The directory "/usr/share/fonts/TTF/" does not exist.
[ 2835.150] Entry deleted from font path.
[ 2835.150] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 2835.150] Entry deleted from font path.
[ 2835.150] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
[ 2835.150] Entry deleted from font path.
[ 2835.150] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 2835.150] Entry deleted from font path.
[ 2835.151] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 2835.151] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 2835.151] Entry deleted from font path.
[ 2835.151] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 2835.151] (==) FontPath set to:
/usr/share/fonts/misc/
[ 2835.151] (==) ModulePath set to "/usr/lib64/xorg/modules"
[ 2835.151] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 2835.151] (II) Loader magic: 0x7febe0
[ 2835.151] (II) Module ABI versions:
[ 2835.151] X.Org ANSI C Emulation: 0.4
[ 2835.151] X.Org Video Driver: 14.1
[ 2835.151] X.Org XInput driver : 19.1
[ 2835.151] X.Org Server Extension : 7.0
[ 2835.151] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 2835.154] (--) PCI:*(0:0:2:0) 8086:0046:1025:031c rev 18, Mem @ 0xd0000000/4194304, 0xc0000000/268435456, I/O @ 0x00003050/8
[ 2835.154] Initializing built-in extension Generic Event Extension
[ 2835.154] Initializing built-in extension SHAPE
[ 2835.154] Initializing built-in extension MIT-SHM
[ 2835.154] Initializing built-in extension XInputExtension
[ 2835.154] Initializing built-in extension XTEST
[ 2835.154] Initializing built-in extension BIG-REQUESTS
[ 2835.154] Initializing built-in extension SYNC
[ 2835.154] Initializing built-in extension XKEYBOARD
[ 2835.154] Initializing built-in extension XC-MISC
[ 2835.154] Initializing built-in extension XINERAMA
[ 2835.154] Initializing built-in extension XFIXES
[ 2835.154] Initializing built-in extension RENDER
[ 2835.154] Initializing built-in extension RANDR
[ 2835.154] Initializing built-in extension COMPOSITE
[ 2835.155] Initializing built-in extension DAMAGE
[ 2835.155] Initializing built-in extension MIT-SCREEN-SAVER
[ 2835.155] Initializing built-in extension DOUBLE-BUFFER
[ 2835.155] Initializing built-in extension RECORD
[ 2835.155] Initializing built-in extension DPMS
[ 2835.155] Initializing built-in extension X-Resource
[ 2835.155] Initializing built-in extension XVideo
[ 2835.155] Initializing built-in extension XVideo-MotionCompensation
[ 2835.155] Initializing built-in extension XFree86-VidModeExtension
[ 2835.155] Initializing built-in extension XFree86-DGA
[ 2835.155] Initializing built-in extension XFree86-DRI
[ 2835.155] Initializing built-in extension DRI2
[ 2835.155] (II) LoadModule: "glx"
[ 2835.155] (II) Loading /usr/lib64/xorg/modules/extensions/libglx.so
[ 2835.155] (II) Module glx: vendor="X.Org Foundation"
[ 2835.155] compiled for 1.14.3, module version = 1.0.0
[ 2835.155] ABI class: X.Org Server Extension, version 7.0
[ 2835.155] (==) AIGLX enabled
[ 2835.155] Loading extension GLX
[ 2835.155] (==) Matched intel as autoconfigured driver 0
[ 2835.155] (==) Matched intel as autoconfigured driver 1
[ 2835.155] (==) Matched vesa as autoconfigured driver 2
[ 2835.155] (==) Matched modesetting as autoconfigured driver 3
[ 2835.155] (==) Matched fbdev as autoconfigured driver 4
[ 2835.155] (==) Assigned the driver to the xf86ConfigLayout
[ 2835.155] (II) LoadModule: "intel"
[ 2835.156] (II) Loading /usr/lib64/xorg/modules/drivers/intel_drv.so
[ 2835.156] (II) Module intel: vendor="X.Org Foundation"
[ 2835.156] compiled for 1.14.3, module version = 2.21.15
[ 2835.156] Module class: X.Org Video Driver
[ 2835.156] ABI class: X.Org Video Driver, version 14.1
[ 2835.156] (II) LoadModule: "vesa"
[ 2835.156] (II) Loading /usr/lib64/xorg/modules/drivers/vesa_drv.so
[ 2835.156] (II) Module vesa: vendor="X.Org Foundation"
[ 2835.156] compiled for 1.14.3, module version = 2.3.3
[ 2835.156] Module class: X.Org Video Driver
[ 2835.156] ABI class: X.Org Video Driver, version 14.1
[ 2835.156] (II) LoadModule: "modesetting"
[ 2835.157] (WW) Warning, couldn't open module modesetting
[ 2835.157] (II) UnloadModule: "modesetting"
[ 2835.157] (II) Unloading modesetting
[ 2835.157] (EE) Failed to load module "modesetting" (module does not exist, 0)
[ 2835.157] (II) LoadModule: "fbdev"
[ 2835.157] (WW) Warning, couldn't open module fbdev
[ 2835.157] (II) UnloadModule: "fbdev"
[ 2835.157] (II) Unloading fbdev
[ 2835.157] (EE) Failed to load module "fbdev" (module does not exist, 0)
[ 2835.157] (II) intel: Driver for Intel(R) Integrated Graphics Chipsets:
i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G,
915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM,
Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33,
GM45, 4 Series, G45/G43, Q45/Q43, G41, B43, HD Graphics,
HD Graphics 2000, HD Graphics 3000, HD Graphics 2500,
HD Graphics 4000, HD Graphics P4000, HD Graphics 4600,
HD Graphics 5000, HD Graphics P4600/P4700, Iris(TM) Graphics 5100,
HD Graphics 4400, HD Graphics 4200, Iris(TM) Pro Graphics 5200
[ 2835.158] (II) VESA: driver for VESA chipsets: vesa
[ 2835.158] (++) using VT number 7
[ 2835.440] (WW) Falling back to old probe method for vesa
[ 2835.440] (II) intel(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 2835.440] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[ 2835.440] (==) intel(0): RGB weight 888
[ 2835.440] (==) intel(0): Default visual is TrueColor
[ 2835.440] (--) intel(0): Integrated Graphics Chipset: Intel(R) HD Graphics
[ 2835.441] (--) intel(0): CPU: x86-64, sse2, sse3, ssse3, sse4.1, sse4.2
[ 2835.441] (**) intel(0): Framebuffer tiled
[ 2835.441] (**) intel(0): Pixmaps tiled
[ 2835.441] (**) intel(0): "Tear free" disabled
[ 2835.441] (**) intel(0): Forcing per-crtc-pixmaps? no
[ 2835.441] (II) intel(0): Output LVDS1 has no monitor section
[ 2835.441] (--) intel(0): found backlight control interface acpi_video0 (type 'firmware')
[ 2835.441] (II) intel(0): Output VGA1 has no monitor section
[ 2835.442] (II) intel(0): Output HDMI1 has no monitor section
[ 2835.442] (II) intel(0): Output DP1 has no monitor section
[ 2835.442] (--) intel(0): Output LVDS1 using initial mode 1600x900 on pipe 0
[ 2835.442] (==) intel(0): DPI set to (96, 96)
[ 2835.442] (II) Loading sub module "dri2"
[ 2835.442] (II) LoadModule: "dri2"
[ 2835.442] (II) Module "dri2" already built-in
[ 2835.442] (II) UnloadModule: "vesa"
[ 2835.442] (II) Unloading vesa
[ 2835.442] (==) Depth 24 pixmap format is 32 bpp
[ 2835.442] (II) intel(0): SNA initialized with Ironlake (gen5) backend
[ 2835.442] (==) intel(0): Backing store disabled
[ 2835.442] (==) intel(0): Silken mouse enabled
[ 2835.442] (II) intel(0): HW Cursor enabled
[ 2835.442] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 2835.443] (==) intel(0): DPMS enabled
[ 2835.444] (II) intel(0): [DRI2] Setup complete
[ 2835.444] (II) intel(0): [DRI2] DRI driver: i965
[ 2835.444] (II) intel(0): direct rendering: DRI2 Enabled
[ 2835.444] (==) intel(0): hotplug detection: "enabled"
[ 2835.444] (--) RandR disabled
[ 2835.464] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[ 2835.464] (II) AIGLX: enabled GLX_INTEL_swap_event
[ 2835.464] (II) AIGLX: enabled GLX_ARB_create_context
[ 2835.464] (II) AIGLX: enabled GLX_ARB_create_context_profile
[ 2835.464] (II) AIGLX: enabled GLX_EXT_create_context_es2_profile
[ 2835.464] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[ 2835.464] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[ 2835.464] (II) AIGLX: Loaded and initialized i965
[ 2835.464] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 2835.480] (II) intel(0): switch to mode 1600x900@60.0 on pipe 0 using LVDS1, position (0, 0), rotation normal
[ 2835.501] (II) intel(0): Setting screen physical size to 423 x 238
[ 2835.563] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[ 2835.563] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 2835.564] (II) LoadModule: "evdev"
[ 2835.564] (II) Loading /usr/lib64/xorg/modules/input/evdev_drv.so
[ 2835.564] (II) Module evdev: vendor="X.Org Foundation"
[ 2835.564] compiled for 1.14.3, module version = 2.8.1
[ 2835.564] Module class: X.Org XInput Driver
[ 2835.564] ABI class: X.Org XInput driver, version 19.1
[ 2835.564] (II) Using input driver 'evdev' for 'Power Button'
[ 2835.564] (**) Power Button: always reports core events
[ 2835.564] (**) evdev: Power Button: Device: "/dev/input/event3"
[ 2835.564] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 2835.564] (--) evdev: Power Button: Found keys
[ 2835.564] (II) evdev: Power Button: Configuring as keyboard
[ 2835.564] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3/event3"
[ 2835.564] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 2835.564] (**) Option "xkb_rules" "evdev"
[ 2835.564] (**) Option "xkb_model" "pc104"
[ 2835.564] (**) Option "xkb_layout" "us"
[ 2835.614] (II) config/udev: Adding input device Video Bus (/dev/input/event4)
[ 2835.614] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 2835.614] (II) Using input driver 'evdev' for 'Video Bus'
[ 2835.614] (**) Video Bus: always reports core events
[ 2835.614] (**) evdev: Video Bus: Device: "/dev/input/event4"
[ 2835.614] (--) evdev: Video Bus: Vendor 0 Product 0x6
[ 2835.614] (--) evdev: Video Bus: Found keys
[ 2835.614] (II) evdev: Video Bus: Configuring as keyboard
[ 2835.614] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input4/event4"
[ 2835.615] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[ 2835.615] (**) Option "xkb_rules" "evdev"
[ 2835.615] (**) Option "xkb_model" "pc104"
[ 2835.615] (**) Option "xkb_layout" "us"
[ 2835.615] (II) config/udev: Adding input device Power Button (/dev/input/event0)
[ 2835.615] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 2835.615] (II) Using input driver 'evdev' for 'Power Button'
[ 2835.615] (**) Power Button: always reports core events
[ 2835.616] (**) evdev: Power Button: Device: "/dev/input/event0"
[ 2835.616] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 2835.616] (--) evdev: Power Button: Found keys
[ 2835.616] (II) evdev: Power Button: Configuring as keyboard
[ 2835.616] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/device:0e/PNP0C0C:00/input/input0/event0"
[ 2835.616] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id
[ 2835.616] (**) Option "xkb_rules" "evdev"
[ 2835.616] (**) Option "xkb_model" "pc104"
[ 2835.616] (**) Option "xkb_layout" "us"
[ 2835.617] (II) config/udev: Adding input device Lid Switch (/dev/input/event1)
[ 2835.617] (II) No input driver specified, ignoring this device.
[ 2835.617] (II) This device may have been added with another device file.
[ 2835.617] (II) config/udev: Adding input device Sleep Button (/dev/input/event2)
[ 2835.617] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[ 2835.617] (II) Using input driver 'evdev' for 'Sleep Button'
[ 2835.617] (**) Sleep Button: always reports core events
[ 2835.617] (**) evdev: Sleep Button: Device: "/dev/input/event2"
[ 2835.617] (--) evdev: Sleep Button: Vendor 0 Product 0x3
[ 2835.617] (--) evdev: Sleep Button: Found keys
[ 2835.617] (II) evdev: Sleep Button: Configuring as keyboard
[ 2835.617] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/device:0e/PNP0C0E:00/input/input2/event2"
[ 2835.617] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 9)
[ 2835.617] (**) Option "xkb_rules" "evdev"
[ 2835.617] (**) Option "xkb_model" "pc104"
[ 2835.617] (**) Option "xkb_layout" "us"
[ 2835.618] (II) config/udev: Adding drm device (/dev/dri/card0)
[ 2835.618] (II) config/udev: Adding input device HDA Intel MID Headphone (/dev/input/event10)
[ 2835.618] (II) No input driver specified, ignoring this device.
[ 2835.618] (II) This device may have been added with another device file.
[ 2835.619] (II) config/udev: Adding input device HDA Intel MID Mic (/dev/input/event11)
[ 2835.619] (II) No input driver specified, ignoring this device.
[ 2835.619] (II) This device may have been added with another device file.
[ 2835.619] (II) config/udev: Adding input device HDA Intel MID HDMI/DP,pcm=3 (/dev/input/event9)
[ 2835.619] (II) No input driver specified, ignoring this device.
[ 2835.619] (II) This device may have been added with another device file.
[ 2835.620] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/event7)
[ 2835.620] (**) Logitech USB Receiver: Applying InputClass "evdev pointer catchall"
[ 2835.620] (II) Using input driver 'evdev' for 'Logitech USB Receiver'
[ 2835.620] (**) Logitech USB Receiver: always reports core events
[ 2835.620] (**) evdev: Logitech USB Receiver: Device: "/dev/input/event7"
[ 2835.620] (--) evdev: Logitech USB Receiver: Vendor 0x46d Product 0xc526
[ 2835.620] (--) evdev: Logitech USB Receiver: Found 20 mouse buttons
[ 2835.620] (--) evdev: Logitech USB Receiver: Found scroll wheel(s)
[ 2835.620] (--) evdev: Logitech USB Receiver: Found relative axes
[ 2835.620] (--) evdev: Logitech USB Receiver: Found x and y relative axes
[ 2835.620] (II) evdev: Logitech USB Receiver: Configuring as mouse
[ 2835.620] (II) evdev: Logitech USB Receiver: Adding scrollwheel support
[ 2835.620] (**) evdev: Logitech USB Receiver: YAxisMapping: buttons 4 and 5
[ 2835.620] (**) evdev: Logitech USB Receiver: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 2835.620] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.0/input/input7/event7"
[ 2835.620] (II) XINPUT: Adding extended input device "Logitech USB Receiver" (type: MOUSE, id 10)
[ 2835.620] (II) evdev: Logitech USB Receiver: initialized for relative axes.
[ 2835.621] (**) Logitech USB Receiver: (accel) keeping acceleration scheme 1
[ 2835.621] (**) Logitech USB Receiver: (accel) acceleration profile 0
[ 2835.621] (**) Logitech USB Receiver: (accel) acceleration factor: 2.000
[ 2835.621] (**) Logitech USB Receiver: (accel) acceleration threshold: 4
[ 2835.621] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/mouse1)
[ 2835.622] (II) No input driver specified, ignoring this device.
[ 2835.622] (II) This device may have been added with another device file.
[ 2835.622] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/event8)
[ 2835.622] (**) Logitech USB Receiver: Applying InputClass "evdev keyboard catchall"
[ 2835.622] (II) Using input driver 'evdev' for 'Logitech USB Receiver'
[ 2835.622] (**) Logitech USB Receiver: always reports core events
[ 2835.622] (**) evdev: Logitech USB Receiver: Device: "/dev/input/event8"
[ 2835.622] (--) evdev: Logitech USB Receiver: Vendor 0x46d Product 0xc526
[ 2835.622] (--) evdev: Logitech USB Receiver: Found 1 mouse buttons
[ 2835.622] (--) evdev: Logitech USB Receiver: Found scroll wheel(s)
[ 2835.622] (--) evdev: Logitech USB Receiver: Found relative axes
[ 2835.622] (II) evdev: Logitech USB Receiver: Forcing relative x/y axes to exist.
[ 2835.622] (--) evdev: Logitech USB Receiver: Found absolute axes
[ 2835.622] (II) evdev: Logitech USB Receiver: Forcing absolute x/y axes to exist.
[ 2835.622] (--) evdev: Logitech USB Receiver: Found keys
[ 2835.622] (II) evdev: Logitech USB Receiver: Configuring as mouse
[ 2835.622] (II) evdev: Logitech USB Receiver: Configuring as keyboard
[ 2835.622] (II) evdev: Logitech USB Receiver: Adding scrollwheel support
[ 2835.622] (**) evdev: Logitech USB Receiver: YAxisMapping: buttons 4 and 5
[ 2835.622] (**) evdev: Logitech USB Receiver: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 2835.622] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.1/input/input8/event8"
[ 2835.622] (II) XINPUT: Adding extended input device "Logitech USB Receiver" (type: KEYBOARD, id 11)
[ 2835.622] (**) Option "xkb_rules" "evdev"
[ 2835.622] (**) Option "xkb_model" "pc104"
[ 2835.623] (**) Option "xkb_layout" "us"
[ 2835.623] (II) evdev: Logitech USB Receiver: initialized for relative axes.
[ 2835.623] (WW) evdev: Logitech USB Receiver: ignoring absolute axes.
[ 2835.623] (**) Logitech USB Receiver: (accel) keeping acceleration scheme 1
[ 2835.623] (**) Logitech USB Receiver: (accel) acceleration profile 0
[ 2835.623] (**) Logitech USB Receiver: (accel) acceleration factor: 2.000
[ 2835.623] (**) Logitech USB Receiver: (accel) acceleration threshold: 4
[ 2835.624] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event5)
[ 2835.624] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 2835.624] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[ 2835.624] (**) AT Translated Set 2 keyboard: always reports core events
[ 2835.624] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event5"
[ 2835.624] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[ 2835.624] (--) evdev: AT Translated Set 2 keyboard: Found keys
[ 2835.624] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[ 2835.624] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input5/event5"
[ 2835.624] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 12)
[ 2835.624] (**) Option "xkb_rules" "evdev"
[ 2835.624] (**) Option "xkb_model" "pc104"
[ 2835.624] (**) Option "xkb_layout" "us"
[ 2835.625] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event6)
[ 2835.625] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
[ 2835.625] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
[ 2835.625] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "Default clickpad buttons"
[ 2835.625] (II) LoadModule: "synaptics"
[ 2835.625] (II) Loading /usr/lib64/xorg/modules/input/synaptics_drv.so
[ 2835.626] (II) Module synaptics: vendor="X.Org Foundation"
[ 2835.626] compiled for 1.14.3, module version = 1.7.1
[ 2835.626] Module class: X.Org XInput Driver
[ 2835.626] ABI class: X.Org XInput driver, version 19.1
[ 2835.626] (II) Using input driver 'synaptics' for 'SynPS/2 Synaptics TouchPad'
[ 2835.626] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 2835.626] (**) Option "Device" "/dev/input/event6"
[ 2835.764] (II) synaptics: SynPS/2 Synaptics TouchPad: ignoring touch events for semi-multitouch device
[ 2835.764] (--) synaptics: SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5584 (res 61)
[ 2835.765] (--) synaptics: SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4434 (res 81)
[ 2835.765] (--) synaptics: SynPS/2 Synaptics TouchPad: pressure range 0 - 255
[ 2835.765] (--) synaptics: SynPS/2 Synaptics TouchPad: finger width range 0 - 15
[ 2835.765] (--) synaptics: SynPS/2 Synaptics TouchPad: buttons: left right double triple scroll-buttons
[ 2835.765] (--) synaptics: SynPS/2 Synaptics TouchPad: Vendor 0x2 Product 0x7
[ 2835.765] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[ 2835.765] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 2835.831] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input6/event6"
[ 2835.831] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 13)
[ 2835.831] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MinSpeed is now constant deceleration 2.5
[ 2835.831] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MaxSpeed is now 1.75
[ 2835.831] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) AccelFactor is now 0.039
[ 2835.832] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
[ 2835.832] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 1
[ 2835.832] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
[ 2835.832] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
[ 2835.832] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[ 2835.832] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse0)
[ 2835.832] (**) SynPS/2 Synaptics TouchPad: Ignoring device from InputClass "touchpad ignore duplicates"
[ 2857.926] (II) intel(0): EDID vendor "SEC", prod id 12369
[ 2857.926] (II) intel(0): Printing DDC gathered Modelines:
[ 2857.926] (II) intel(0): Modeline "1600x900"x0.0 107.84 1600 1648 1680 1892 900 902 908 950 -hsync -vsync (57.0 kHz eP)
|
|
|
| Back to top |
|
|
jkagen
n00b
Joined: 29 Jul 2008
Posts: 42
|
| Posted: Sun Oct 06, 2013 6:53 pm Post subject: |
|
|
problem solved by using acpi_osi=Linux acpi_backlight=vendor
upon kernel boot |
|
| Back to top |
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
|
|
Kernel & Hardware
