Gentoo Forums
Gentoo Forums
Gentoo Forums
Quick Search: in
[SOLVED] jak przypisać eth(0,1,2) do MACa?
View unanswered posts
View posts from last 24 hours
View posts from last 7 days

 
Reply to topic    Gentoo Forums Forum Index Polskie forum (Polish) Instalacja i sprzęt
View previous topic :: View next topic  
Author Message
Oniryczny
Guru
Guru


Joined: 01 Dec 2011
Posts: 419
Location: Poland

PostPosted: Mon Sep 30, 2013 6:54 pm    Post subject: [SOLVED] jak przypisać eth(0,1,2) do MACa? Reply with quote

problem pewnie trywialny ale coś nie daję rady
mam 3 karty sieciowe (RTL8168/8111 zintegrowana na mobo, RTL8168/8111 PCI oraz RTL8139 PCI) [karta 10/100/1000 nie chce za nic gadać z RPi dlatego zakupiłem kartę 10/100]
z początku gdy była tylko integra to była eth0
ale po dołożeniu kart PCI zmieniła na eth1

chciałbym mieć na stałe to przypisane

próbowałem skorzystać z artykułów na temat konfiguracji udeva ale grzebanie w /etc/udev/rules.d/ nie pomogło...

arch x86_64
kernel 3.10.7 (przedostatni stabilny na dzień dzisiejszy) system aktualny
_________________
cogito ergo sum


Last edited by Oniryczny on Tue Nov 19, 2013 5:58 am; edited 1 time in total
Back to top
View user's profile Send private message
SlashBeast
Retired Dev
Retired Dev


Joined: 23 May 2006
Posts: 2922

PostPosted: Mon Sep 30, 2013 7:02 pm    Post subject: Reply with quote

Udev z automatu Ci to zalatwi, wygeneruje odpowiednie regulki w /etc/udev/rules.d/*net*

W przypadku mdev(-like-a-boss) od tego jest /etc/mactab
Back to top
View user's profile Send private message
Oniryczny
Guru
Guru


Joined: 01 Dec 2011
Posts: 419
Location: Poland

PostPosted: Tue Oct 01, 2013 5:43 am    Post subject: Reply with quote

nie mam nic takiego jak /etc/mactab
w /etc/udev/rules.d/ w jednym z nicj jest tylko wpis jednej karty:

    SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*", ATTR{address}=="e0:cb:4e:d5:cd:81", ATTR{dev_id}=="0x0", ATTR{type}=="1", KERNEL=="eth*", NAME="eth0"

jak dla mnie to definiuje eth0 a ifconfig pokazuje to jako eth1 :?
_________________
cogito ergo sum
Back to top
View user's profile Send private message
Jacekalex
Guru
Guru


Joined: 17 Sep 2009
Posts: 553

PostPosted: Wed Oct 02, 2013 6:44 pm    Post subject: Reply with quote

U mnie:
Code:
egrep -v '#' /etc/udev/rules.d/80-net-name-slot.rules

SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*", ATTR{address}=="00:04:76:e9:48:c1", ATTR{dev_id}=="0x0", ATTR{type}=="1", KERNEL=="eth*", NAME="lan"

SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*", ATTR{address}=="00:24:1d:c4:82:87", ATTR{dev_id}=="0x0", ATTR{type}=="1", KERNEL=="eth*", NAME="net"


Zainstalowane:
Code:
sys-fs/eudev-1.1 gudev hwdb introspection keymap kmod modutils openrc selinux
sys-fs/udev-init-scripts-26
virtual/udev-200 gudev hwdb introspection keymap kmod selinux


SOA#1

Pozdro
8)
Back to top
View user's profile Send private message
Oniryczny
Guru
Guru


Joined: 01 Dec 2011
Posts: 419
Location: Poland

PostPosted: Fri Oct 04, 2013 6:12 am    Post subject: Reply with quote

Code:
# ls -l /etc/udev/rules.d/
razem 0
lrwxrwxrwx 1 root root 9 10-01 20:11 80-net-name-slot.rules -> /dev/null


usunąłem tam wszystkie pliki i mam tylko dowiązanie (sposób jaki znalazłem gdzieś na jakimś forum :P )
bo jak wcześniej próbowałem edytować ten plik wpisując określone adresy MAC i nazwy eth0/1/2 to nic nie pomagało...
_________________
cogito ergo sum
Back to top
View user's profile Send private message
Oniryczny
Guru
Guru


Joined: 01 Dec 2011
Posts: 419
Location: Poland

PostPosted: Mon Oct 07, 2013 5:30 pm    Post subject: Reply with quote

utworzyłem plik, wpisałem co należy
Code:

$ ifconfig
lan_100: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500
        inet 169.254.146.40  netmask 255.255.0.0  broadcast 169.254.255.255
        inet6 fe80::6670:2ff:fe07:ac  prefixlen 64  scopeid 0x20<link>
        ether 64:70:02:07:00:ac  txqueuelen 1000  (Ethernet)
        RX packets 0  bytes 0 (0.0 B)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 41  bytes 8828 (8.6 KiB)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

lan_100:1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500
        inet 192.168.2.13  netmask 255.255.255.0  broadcast 192.168.2.255
        ether 64:70:02:07:00:ac  txqueuelen 1000  (Ethernet)

lan_1000: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500
        inet 192.168.3.13  netmask 255.255.255.0  broadcast 192.168.3.255
        ether f8:1a:67:02:23:ac  txqueuelen 1000  (Ethernet)
        RX packets 0  bytes 0 (0.0 B)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 0  bytes 0 (0.0 B)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

lan_dhcp: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500
        inet 192.168.1.103  netmask 255.255.255.0  broadcast 192.168.1.255
        inet6 fe80::e2cb:4eff:fed5:cd81  prefixlen 64  scopeid 0x20<link>
        ether e0:cb:4e:d5:cd:81  txqueuelen 1000  (Ethernet)
        RX packets 4231  bytes 5130737 (4.8 MiB)
        RX errors 0  dropped 2  overruns 0  frame 0
        TX packets 2685  bytes 293633 (286.7 KiB)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

lo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536
        inet 127.0.0.1  netmask 255.0.0.0
        inet6 ::1  prefixlen 128  scopeid 0x10<host>
        loop  txqueuelen 0  (Local Loopback)
        RX packets 0  bytes 0 (0.0 B)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 0  bytes 0 (0.0 B)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

tap0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500
        inet 10.3.1.8  netmask 255.255.255.0  broadcast 10.3.1.255
        inet6 fe80::80fc:73ff:fe4c:e894  prefixlen 64  scopeid 0x20<link>
        ether 82:fc:73:4c:e8:94  txqueuelen 100  (Ethernet)
        RX packets 20  bytes 3642 (3.5 KiB)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 24  bytes 5527 (5.3 KiB)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

dziwny zapis lan_100 ale ważne, że działa 8)
_________________
cogito ergo sum
Back to top
View user's profile Send private message
Display posts from previous:   
Reply to topic    Gentoo Forums Forum Index Polskie forum (Polish) Instalacja i sprzęt All times are GMT
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum