Gentoo Forums
Gentoo Forums
Gentoo Forums
Quick Search: in
Update The Kernel 3.11.0 EE Log
View unanswered posts
View posts from last 24 hours

 
Reply to topic    Gentoo Forums Forum Index Kernel & Hardware
View previous topic :: View next topic  
Author Message
lhw828
n00b
n00b


Joined: 05 Sep 2013
Posts: 10

PostPosted: Tue Sep 10, 2013 5:39 am    Post subject: Update The Kernel 3.11.0 EE Log Reply with quote

Code:

* Gentoo Linux Genkernel; Version 3.4.47
* Running with options: --bootloader=grub all
* Using genkernel.conf from /etc/genkernel.conf
* Sourcing arch-specific config.sh from /usr/share/genkernel/arch/x86_64/config.sh ..
* Sourcing arch-specific modules_load from /usr/share/genkernel/arch/x86_64/modules_load ..

* Linux Kernel 3.11.0-gentoo for x86_64...
* .. with config file /usr/share/genkernel/arch/x86_64/kernel-config
* WARNING: Failed to mount /boot!
* kernel: Using config from /usr/share/genkernel/arch/x86_64/kernel-config
* kernel: >> Running mrproper...
COMMAND: make -j2 CC="gcc" LD="ld" AS="as" ARCH="x86" 
 * gcc-config: Active gcc profile is invalid!
gcc-config: error: could not run/locate 'gcc'
*         >> Running oldconfig...
COMMAND: make -j2 CC="gcc" LD="ld" AS="as" ARCH="x86" 
  HOSTCC  scripts/basic/fixdep
 * gcc-config: Active gcc profile is invalid!
gcc-config: error: could not run/locate 'gcc'
make[1]: *** [scripts/basic/fixdep] Error 1
make: *** [scripts_basic] Error 2
* Gentoo Linux Genkernel; Version 3.4.47
* Running with options: --bootloader=grub all
* Using genkernel.conf from /etc/genkernel.conf
* Sourcing arch-specific config.sh from /usr/share/genkernel/arch/x86_64/config.sh ..
* Sourcing arch-specific modules_load from /usr/share/genkernel/arch/x86_64/modules_load ..

* ERROR: Failed to compile the "oldconfig" target...
*
* -- Grepping log... --
*
*
* -- End log... --
*
* Please consult /var/log/genkernel.log for more information and any
* errors that were reported above.
*
* Report any genkernel bugs to bugs.gentoo.org and
* assign your bug to genkernel@gentoo.org. Please include
* as much information as you can in your bug report; attaching
* /var/log/genkernel.log so that your issue can be dealt with effectively.
*
* Please do *not* report compilation failures as genkernel bugs!
*
* kernel: >> Cleaning...
COMMAND: make -j2 CC="gcc" LD="ld" AS="as" ARCH="x86" 
 * gcc-config: Active gcc profile is invalid!
gcc-config: error: could not run/locate 'gcc'
COMMAND: make -j2 CC="gcc" LD="ld" AS="as" ARCH="x86" 
 * gcc-config: Active gcc profile is invalid!
gcc-config: error: could not run/locate 'gcc'
  HOSTCC  scripts/basic/fixdep
 * gcc-config: Active gcc profile is invalid!
gcc-config: error: could not run/locate 'gcc'
make[2]: *** [scripts/basic/fixdep] Error 1
make[1]: *** [scripts_basic] Error 2
  SYSHDR  arch/x86/syscalls/../include/generated/uapi/asm/unistd_32.h
  SYSHDR  arch/x86/syscalls/../include/generated/uapi/asm/unistd_64.h
  SYSHDR  arch/x86/syscalls/../include/generated/uapi/asm/unistd_x32.h
  SYSTBL  arch/x86/syscalls/../include/generated/asm/syscalls_32.h
make: *** No rule to make target `include/config/auto.conf', needed by `include/config/kernel.release'.  Stop.
make: *** Waiting for unfinished jobs....
  HOSTCC  scripts/basic/fixdep
 * gcc-config: Active gcc profile is invalid!
gcc-config: error: could not run/locate 'gcc'
make[1]: *** [scripts/basic/fixdep] Error 1
make: *** [scripts_basic] Error 2
* Gentoo Linux Genkernel; Version 3.4.47
* Running with options: --bootloader=grub all
* Using genkernel.conf from /etc/genkernel.conf
* Sourcing arch-specific config.sh from /usr/share/genkernel/arch/x86_64/config.sh ..
* Sourcing arch-specific modules_load from /usr/share/genkernel/arch/x86_64/modules_load ..

* ERROR: Failed to compile the "prepare" target...
*
* -- Grepping log... --
*
*
* -- End log... --
*
* Please consult /var/log/genkernel.log for more information and any
* errors that were reported above.
*
* Report any genkernel bugs to bugs.gentoo.org and
* assign your bug to genkernel@gentoo.org. Please include
* as much information as you can in your bug report; attaching
* /var/log/genkernel.log so that your issue can be dealt with effectively.
*
* Please do *not* report compilation failures as genkernel bugs!
*
Back to top
View user's profile Send private message
alacheesu
Tux's lil' helper
Tux's lil' helper


Joined: 01 Jun 2005
Posts: 111

PostPosted: Tue Sep 10, 2013 8:34 am    Post subject: Reply with quote

I don't use genkernel, but
Code:
 * gcc-config: Active gcc profile is invalid!

doesn't look good. What does gcc-config -l say? Try setting it to a valid gcc profile with something like gcc-config 1. Also please post your make.conf.
Back to top
View user's profile Send private message
lhw828
n00b
n00b


Joined: 05 Sep 2013
Posts: 10

PostPosted: Tue Sep 10, 2013 8:43 am    Post subject: Reply with quote

alacheesu wrote:
I don't use genkernel, but
Code:
 * gcc-config: Active gcc profile is invalid!

doesn't look good. What does gcc-config -l say? Try setting it to a valid gcc profile with something like gcc-config 1. Also please post your make.conf.



Code:
gcc-config -l
 * gcc-config: Active gcc profile is invalid!

 [1] x86_64-pc-linux-gnu-4.7.3


Code:
cat /etc/portage/make.conf
# These settings were set by the catalyst build script that automatically
# built this stage.
# Please consult /usr/share/portage/config/make.conf.example for a more
# detailed example.
EMERGE_DEFAULT_OPTS="--autounmask=n"
ACCEPT_LICENSE="*"
ACCEPT_KEYWORDS="~amd64"
LINGUAS="zh zh_CN zh_CN.UTF-8"
VIDEO_CARDS="intel"
MAKEOPTS="-j3"
CFLAGS="-march=core2 -O2 -pipe"
CXXFLAGS="${CFLAGS}"
# WARNING: Changing your CHOST is not something that should be done lightly.
# Please consult http://www.gentoo.org/doc/en/change-chost.xml before changing.
CHOST="x86_64-pc-linux-gnu"
# These are the USE flags that were used in addition to what is provided by the
# profile used for building.
USE="symlink 3dfx opengl pdf png qt3support alsa dri exif flac gif gzip hal mp3 mp4 mpeg ogg -perl -wallpapers -handbook -doc -ppp qt dbus X qt4 -bluetooth -gnome cups kde -ipv6 gtk usb win32codecs x264 zsh-completion"
#GENTOO_MIRRORS="http://mirrors.sohu.com/gentoo/"

#SYNC="rsync://rsync2.cn.gentoo.org/gentoo-portage"
INPUT_DEVICE="evdev synaptics keybord mouse"
source /var/lib/layman/make.conf 
PORTDIR_OVERLAY="${PORTDIR} ${PORTDIR_OVERLAY}" 
#PYTHON_TARGETS="python2_7 python3_3"
PORTDIR="/usr/portage" source /var/lib/layman/make.conf
Back to top
View user's profile Send private message
lhw828
n00b
n00b


Joined: 05 Sep 2013
Posts: 10

PostPosted: Tue Sep 10, 2013 8:54 am    Post subject: Reply with quote

ok,i got it!
Code:
gcc-config -c


x86_64-pc-linux-gnu-4.7.3

Code:
gcc-config x86_64-pc-linux-gnu-4.7.3
Back to top
View user's profile Send private message
alacheesu
Tux's lil' helper
Tux's lil' helper


Joined: 01 Jun 2005
Posts: 111

PostPosted: Tue Sep 10, 2013 10:09 am    Post subject: Reply with quote

Good. Glad to see you solved it!
Back to top
View user's profile Send private message
Display posts from previous:   
Reply to topic    Gentoo Forums Forum Index Kernel & Hardware All times are GMT
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum