kiksen Guru
Joined: 24 Jun 2002 Posts: 401 Location: Denmark
|
Posted: Fri Sep 06, 2013 7:57 am Post subject: Nouveau and 3.11 = No X |
|
|
Hi.
I have issues with 3.11 and nouveau, and can't seem to find a workaround. Maybe someone has suggestions.
When booting on 3.11 dmesg says:
[ 1.116588] [drm] Initialized drm 1.1.0 20060810
[ 1.116731] MXM: GUID detected in BIOS
[ 1.117104] nouveau [ DEVICE][0000:03:00.0] BOOT0 : 0x0c1000a1
[ 1.117217] nouveau [ DEVICE][0000:03:00.0] Chipset: GF108 (NVC1)
[ 1.117330] nouveau [ DEVICE][0000:03:00.0] Family : NVC0
[ 1.118322] nouveau [ VBIOS][0000:03:00.0] checking PRAMIN for image...
[ 1.194400] nouveau [ VBIOS][0000:03:00.0] ... appears to be valid
[ 1.194513] nouveau [ VBIOS][0000:03:00.0] using image from PRAMIN
[ 1.194712] nouveau [ VBIOS][0000:03:00.0] BIT signature found
[ 1.194825] nouveau [ VBIOS][0000:03:00.0] version 70.08.b1.00.00
[ 1.195424] nouveau [ PFB][0000:03:00.0] RAM type: DDR3
[ 1.195587] nouveau [ PFB][0000:03:00.0] RAM size: 1024 MiB
[ 1.195752] nouveau [ PFB][0000:03:00.0] ZCOMP: 0 tags
[ 1.219716] nouveau [ PTHERM][0000:03:00.0] FAN control: none / external
[ 1.219884] nouveau [ PTHERM][0000:03:00.0] fan management: disabled
[ 1.220052] nouveau [ PTHERM][0000:03:00.0] internal sensor: yes
[ 1.222093] [TTM] Zone kernel: Available graphics memory: 16423786 kiB
[ 1.222258] [TTM] Zone dma32: Available graphics memory: 2097152 kiB
[ 1.222422] [TTM] Initializing pool allocator
[ 1.222588] [TTM] Initializing DMA pool allocator
[ 1.222756] nouveau [ DRM] VRAM: 1024 MiB
[ 1.222917] nouveau [ DRM] GART: 1048576 MiB
[ 1.223085] nouveau [ DRM] TMDS table version 2.0
[ 1.223247] nouveau [ DRM] DCB version 4.0
[ 1.223436] nouveau [ DRM] DCB outp 00: 01000302 00020030
[ 1.223600] nouveau [ DRM] DCB outp 01: 02000300 00000000
[ 1.223764] nouveau [ DRM] DCB outp 02: 04011310 00020030
[ 1.223927] nouveau [ DRM] DCB outp 03: 08022392 00020020
[ 1.224095] nouveau [ DRM] DCB conn 00: 00001030
[ 1.224323] nouveau [ DRM] DCB conn 01: 00000100
[ 1.224576] nouveau [ DRM] DCB conn 02: 00002261
[ 1.225669] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 1.225861] [drm] No driver support for vblank timestamp query.
[ 1.226267] nouveau [ DRM] 3 available performance level(s)
[ 1.226433] nouveau [ DRM] 0: core 50MHz shader 101MHz memory 135MHz voltage 900mV
[ 1.226689] nouveau [ DRM] 1: core 405MHz shader 810MHz memory 324MHz voltage 1000mV
[ 1.226971] nouveau [ DRM] 3: core 810MHz shader 1620MHz memory 900MHz voltage 1100mV
[ 1.227233] nouveau [ DRM] c: core 405MHz shader 810MHz memory 324MHz voltage 1000mV
[ 1.230465] nouveau [ DRM] MM: using COPY0 for buffer copies
[ 1.340135] nouveau E[ PBUS][0000:03:00.0] MMIO write of 0x00000401 FAULT at 0x002010 [ IBUS TIMEOUT ]
[ 1.340565] nouveau E[ PMC][0000:03:00.0] unknown intr 0xffffffff
[ 1.372719] nouveau [ DRM] allocated 1920x1200 fb: 0x60000, bo ffff880819bcf400
[ 1.373067] fbcon: nouveaufb (fb0) is primary device
[ 1.619439] nouveau E[ DRM] GPU lockup - switching to software fbcon
Which is not good. The GPU lockup disappears if i add nouveau.nofbaccell=1 to the kernel command line, but the behaviour is the same - no X (never gets to a login prompt and slim log says: slim: waiting for X server to begin accepting connections.
Xorg.0.log says:
[ 14.556]
This is a pre-release version of the X server from The X.Org Foundation.
It is not supported in any way.
Bugs may be filed in the bugzilla at http://bugs.freedesktop.org/.
Select the "xorg" product for bugs you find in this release.
Before reporting bugs in pre-release versions please check the
latest version in the X.Org Foundation git repository.
See http://wiki.x.org/wiki/GitPage for git access instructions.
[ 14.556]
X.Org X Server 1.14.2.902 (1.14.3 RC 2)
Release Date: 2013-08-22
[ 14.556] X Protocol Version 11, Revision 0
[ 14.556] Build Operating System: Linux 3.10.10-gentoo x86_64 Gentoo
[ 14.556] Current Operating System: Linux ziow 3.11.0-gentoo #2 SMP PREEMPT Thu Sep 5 12:03:18 CEST 2013 x86_64
[ 14.556] Kernel command line: BOOT_IMAGE=/kernel-3.11.0-gentoo root=/dev/sda3 ro pcie_aspm=off nouveau.nofbaccel=1
[ 14.556] Build Date: 05 September 2013 08:20:16AM
[ 14.556]
[ 14.556] Current version of pixman: 0.30.2
[ 14.556] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 14.556] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 14.556] (==) Log file: "/var/log/Xorg.0.log", Time: Fri Sep 6 09:38:03 2013
[ 14.557] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 14.557] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 14.558] (==) No Layout section. Using the first Screen section.
[ 14.558] (==) No screen section available. Using defaults.
[ 14.558] (**) |-->Screen "Default Screen Section" (0)
[ 14.558] (**) | |-->Monitor "<default monitor>"
[ 14.558] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 14.558] (==) Automatically adding devices
[ 14.558] (==) Automatically enabling devices
[ 14.558] (==) Automatically adding GPU devices
[ 14.562] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 14.562] Entry deleted from font path.
[ 14.563] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 14.563] Entry deleted from font path.
[ 14.563] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 14.563] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 14.563] Entry deleted from font path.
[ 14.563] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 14.563] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/Type1/
[ 14.563] (==) ModulePath set to "/usr/lib64/xorg/modules"
[ 14.563] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 14.563] (II) Loader magic: 0x802c00
[ 14.563] (II) Module ABI versions:
[ 14.563] X.Org ANSI C Emulation: 0.4
[ 14.563] X.Org Video Driver: 14.1
[ 14.563] X.Org XInput driver : 19.1
[ 14.563] X.Org Server Extension : 7.0
[ 14.563] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 14.565] (--) PCI:*(0:3:0:0) 10de:0f00:1043:8436 rev 161, Mem @ 0xfd000000/16777216, 0xc0000000/268435456, 0xd0000000/33554432, I/O @ 0x0000b000/128, BIOS @ 0x????????/524288
[ 14.565] Initializing built-in extension Generic Event Extension
[ 14.565] Initializing built-in extension SHAPE
[ 14.565] Initializing built-in extension MIT-SHM
[ 14.565] Initializing built-in extension XInputExtension
[ 14.565] Initializing built-in extension XTEST
[ 14.565] Initializing built-in extension BIG-REQUESTS
[ 14.565] Initializing built-in extension SYNC
[ 14.565] Initializing built-in extension XKEYBOARD
[ 14.565] Initializing built-in extension XC-MISC
[ 14.565] Initializing built-in extension XINERAMA
[ 14.565] Initializing built-in extension XFIXES
[ 14.565] Initializing built-in extension RENDER
[ 14.565] Initializing built-in extension RANDR
[ 14.565] Initializing built-in extension COMPOSITE
[ 14.565] Initializing built-in extension DAMAGE
[ 14.565] Initializing built-in extension MIT-SCREEN-SAVER
[ 14.565] Initializing built-in extension DOUBLE-BUFFER
[ 14.565] Initializing built-in extension RECORD
[ 14.565] Initializing built-in extension DPMS
[ 14.565] Initializing built-in extension X-Resource
[ 14.565] Initializing built-in extension XVideo
[ 14.565] Initializing built-in extension XVideo-MotionCompensation
[ 14.565] Initializing built-in extension XFree86-VidModeExtension
[ 14.565] Initializing built-in extension XFree86-DGA
[ 14.565] Initializing built-in extension XFree86-DRI
[ 14.565] Initializing built-in extension DRI2
[ 14.565] (II) LoadModule: "glx"
[ 14.568] (II) Loading /usr/lib64/xorg/modules/extensions/libglx.so
[ 14.569] (II) Module glx: vendor="X.Org Foundation"
[ 14.569] compiled for 1.14.2.902, module version = 1.0.0
[ 14.569] ABI class: X.Org Server Extension, version 7.0
[ 14.569] (==) AIGLX enabled
[ 14.569] Loading extension GLX
[ 14.569] (==) Matched nouveau as autoconfigured driver 0
[ 14.569] (==) Matched nv as autoconfigured driver 1
[ 14.569] (==) Matched nouveau as autoconfigured driver 2
[ 14.569] (==) Matched nv as autoconfigured driver 3
[ 14.569] (==) Matched vesa as autoconfigured driver 4
[ 14.569] (==) Matched modesetting as autoconfigured driver 5
[ 14.569] (==) Matched fbdev as autoconfigured driver 6
[ 14.569] (==) Assigned the driver to the xf86ConfigLayout
[ 14.569] (II) LoadModule: "nouveau"
[ 14.570] (II) Loading /usr/lib64/xorg/modules/drivers/nouveau_drv.so
[ 14.571] (II) Module nouveau: vendor="X.Org Foundation"
[ 14.571] compiled for 1.14.2.902, module version = 1.0.9
[ 14.571] Module class: X.Org Video Driver
[ 14.571] ABI class: X.Org Video Driver, version 14.1
[ 14.571] (II) LoadModule: "nv"
[ 14.571] (WW) Warning, couldn't open module nv
[ 14.571] (II) UnloadModule: "nv"
[ 14.571] (II) Unloading nv
[ 14.571] (EE) Failed to load module "nv" (module does not exist, 0)
[ 14.571] (II) LoadModule: "vesa"
[ 14.571] (WW) Warning, couldn't open module vesa
[ 14.571] (II) UnloadModule: "vesa"
[ 14.571] (II) Unloading vesa
[ 14.571] (EE) Failed to load module "vesa" (module does not exist, 0)
[ 14.571] (II) LoadModule: "modesetting"
[ 14.572] (WW) Warning, couldn't open module modesetting
[ 14.572] (II) UnloadModule: "modesetting"
[ 14.572] (II) Unloading modesetting
[ 14.572] (EE) Failed to load module "modesetting" (module does not exist, 0)
[ 14.572] (II) LoadModule: "fbdev"
[ 14.572] (WW) Warning, couldn't open module fbdev
[ 14.572] (II) UnloadModule: "fbdev"
[ 14.572] (II) Unloading fbdev
[ 14.572] (EE) Failed to load module "fbdev" (module does not exist, 0)
[ 14.572] (II) NOUVEAU driver
[ 14.572] (II) NOUVEAU driver for NVIDIA chipset families :
[ 14.572] RIVA TNT (NV04)
[ 14.572] RIVA TNT2 (NV05)
[ 14.572] GeForce 256 (NV10)
[ 14.572] GeForce 2 (NV11, NV15)
[ 14.572] GeForce 4MX (NV17, NV18)
[ 14.572] GeForce 3 (NV20)
[ 14.572] GeForce 4Ti (NV25, NV28)
[ 14.572] GeForce FX (NV3x)
[ 14.572] GeForce 6 (NV4x)
[ 14.572] GeForce 7 (G7x)
[ 14.572] GeForce 8 (G8x)
[ 14.572] GeForce GTX 200 (NVA0)
[ 14.572] GeForce GTX 400 (NVC0)
[ 14.572] (++) using VT number 7
[ 14.576] (II) [drm] nouveau interface version: 1.1.1
[ 14.576] (II) Loading sub module "dri2"
[ 14.576] (II) LoadModule: "dri2"
[ 14.576] (II) Module "dri2" already built-in
[ 14.576] (--) NOUVEAU(0): Chipset: "NVIDIA NVC1"
[ 14.576] (II) NOUVEAU(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 14.576] (==) NOUVEAU(0): Depth 24, (--) framebuffer bpp 32
[ 14.576] (==) NOUVEAU(0): RGB weight 888
[ 14.576] (==) NOUVEAU(0): Default visual is TrueColor
[ 14.576] (==) NOUVEAU(0): Using HW cursor
[ 14.576] (==) NOUVEAU(0): GLX sync to VBlank disabled.
[ 14.576] (==) NOUVEAU(0): Page flipping enabled
[ 14.576] (==) NOUVEAU(0): Swap limit set to 2 [Max allowed 2]
[ 14.615] (II) NOUVEAU(0): Output DVI-I-1 has no monitor section
[ 14.636] (II) NOUVEAU(0): Output VGA-1 has no monitor section
[ 14.638] (II) NOUVEAU(0): Output HDMI-1 has no monitor section
[ 14.675] (II) NOUVEAU(0): EDID for output DVI-I-1
[ 14.675] (II) NOUVEAU(0): Manufacturer: ENC Model: 1996 Serial#: 16843009
[ 14.675] (II) NOUVEAU(0): Year: 2009 Week: 51
[ 14.675] (II) NOUVEAU(0): EDID Version: 1.3
[ 14.675] (II) NOUVEAU(0): Digital Display Input
[ 14.675] (II) NOUVEAU(0): Max Image Size [cm]: horiz.: 52 vert.: 33
[ 14.675] (II) NOUVEAU(0): Gamma: 2.20
[ 14.675] (II) NOUVEAU(0): DPMS capabilities: StandBy Suspend Off
[ 14.675] (II) NOUVEAU(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[ 14.675] (II) NOUVEAU(0): First detailed timing is preferred mode
[ 14.675] (II) NOUVEAU(0): redX: 0.650 redY: 0.337 greenX: 0.296 greenY: 0.604
[ 14.675] (II) NOUVEAU(0): blueX: 0.147 blueY: 0.073 whiteX: 0.313 whiteY: 0.329
[ 14.675] (II) NOUVEAU(0): Supported established timings:
[ 14.675] (II) NOUVEAU(0): 720x400@70Hz
[ 14.675] (II) NOUVEAU(0): 640x480@60Hz
[ 14.675] (II) NOUVEAU(0): 800x600@60Hz
[ 14.675] (II) NOUVEAU(0): 1024x768@60Hz
[ 14.675] (II) NOUVEAU(0): Manufacturer's mask: 0
[ 14.675] (II) NOUVEAU(0): Supported standard timings:
[ 14.675] (II) NOUVEAU(0): #0: hsize: 1600 vsize 1200 refresh: 60 vid: 16553
[ 14.675] (II) NOUVEAU(0): #1: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
[ 14.675] (II) NOUVEAU(0): #2: hsize: 1280 vsize 960 refresh: 60 vid: 16513
[ 14.675] (II) NOUVEAU(0): #3: hsize: 1680 vsize 1050 refresh: 60 vid: 179
[ 14.675] (II) NOUVEAU(0): Supported detailed timing:
[ 14.675] (II) NOUVEAU(0): clock: 154.0 MHz Image Size: 519 x 324 mm
[ 14.675] (II) NOUVEAU(0): h_active: 1920 h_sync: 1968 h_sync_end 2000 h_blank_end 2080 h_border: 0
[ 14.675] (II) NOUVEAU(0): v_active: 1200 v_sync: 1203 v_sync_end 1209 v_blanking: 1235 v_border: 0
[ 14.675] (II) NOUVEAU(0): Serial No: 40883129
[ 14.675] (II) NOUVEAU(0): Ranges: V min: 59 V max: 61 Hz, H min: 31 H max: 76 kHz, PixClock max 175 MHz
[ 14.675] (II) NOUVEAU(0): Monitor name: S2402W
[ 14.675] (II) NOUVEAU(0): EDID (in hex):
[ 14.675] (II) NOUVEAU(0): 00ffffffffffff0015c3961901010101
[ 14.675] (II) NOUVEAU(0): 3313010380342178ea9ef5a6564b9a25
[ 14.675] (II) NOUVEAU(0): 125054a10800a94081808140b3000101
[ 14.675] (II) NOUVEAU(0): 010101010101283c80a070b023403020
[ 14.675] (II) NOUVEAU(0): 360007442100001a000000ff00343038
[ 14.675] (II) NOUVEAU(0): 38333132390a20202020000000fd003b
[ 14.675] (II) NOUVEAU(0): 3d1f4c11000a202020202020000000fc
[ 14.675] (II) NOUVEAU(0): 005332343032570a202020202020006a
[ 14.675] (II) NOUVEAU(0): Printing probed modes for output DVI-I-1
[ 14.675] (II) NOUVEAU(0): Modeline "1920x1200"x60.0 154.00 1920 1968 2000 2080 1200 1203 1209 1235 +hsync -vsync (74.0 kHz eP)
[ 14.675] (II) NOUVEAU(0): Modeline "1600x1200"x60.0 162.00 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync (75.0 kHz e)
[ 14.675] (II) NOUVEAU(0): Modeline "1680x1050"x59.9 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz e)
[ 14.675] (II) NOUVEAU(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[ 14.675] (II) NOUVEAU(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz e)
[ 14.675] (II) NOUVEAU(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 14.675] (II) NOUVEAU(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 14.675] (II) NOUVEAU(0): Modeline "640x480"x60.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 14.675] (II) NOUVEAU(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
[ 14.696] (II) NOUVEAU(0): EDID for output VGA-1
[ 14.699] (II) NOUVEAU(0): EDID for output HDMI-1
[ 14.699] (II) NOUVEAU(0): Output DVI-I-1 connected
[ 14.699] (II) NOUVEAU(0): Output VGA-1 disconnected
[ 14.699] (II) NOUVEAU(0): Output HDMI-1 disconnected
[ 14.699] (II) NOUVEAU(0): Using exact sizes for initial modes
[ 14.699] (II) NOUVEAU(0): Output DVI-I-1 using initial mode 1920x1200
[ 14.699] (II) NOUVEAU(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[ 14.699] (--) NOUVEAU(0): Virtual size is 1920x1200 (pitch 0)
[ 14.699] (**) NOUVEAU(0): Driver mode "1920x1200": 154.0 MHz (scaled from 0.0 MHz), 74.0 kHz, 60.0 Hz
[ 14.699] (II) NOUVEAU(0): Modeline "1920x1200"x60.0 154.00 1920 1968 2000 2080 1200 1203 1209 1235 +hsync -vsync (74.0 kHz eP)
[ 14.699] (**) NOUVEAU(0): Driver mode "1600x1200": 162.0 MHz (scaled from 0.0 MHz), 75.0 kHz, 60.0 Hz
[ 14.699] (II) NOUVEAU(0): Modeline "1600x1200"x60.0 162.00 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync (75.0 kHz e)
[ 14.699] (**) NOUVEAU(0): Driver mode "1680x1050": 119.0 MHz (scaled from 0.0 MHz), 64.7 kHz, 59.9 Hz
[ 14.699] (II) NOUVEAU(0): Modeline "1680x1050"x59.9 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz e)
[ 14.699] (**) NOUVEAU(0): Driver mode "1280x1024": 108.0 MHz (scaled from 0.0 MHz), 64.0 kHz, 60.0 Hz
[ 14.699] (II) NOUVEAU(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[ 14.699] (**) NOUVEAU(0): Driver mode "1280x960": 108.0 MHz (scaled from 0.0 MHz), 60.0 kHz, 60.0 Hz
[ 14.699] (II) NOUVEAU(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz e)
[ 14.699] (**) NOUVEAU(0): Driver mode "1024x768": 65.0 MHz (scaled from 0.0 MHz), 48.4 kHz, 60.0 Hz
[ 14.699] (II) NOUVEAU(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 14.699] (**) NOUVEAU(0): Driver mode "800x600": 40.0 MHz (scaled from 0.0 MHz), 37.9 kHz, 60.3 Hz
[ 14.699] (II) NOUVEAU(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 14.699] (**) NOUVEAU(0): Driver mode "640x480": 25.2 MHz (scaled from 0.0 MHz), 31.5 kHz, 60.0 Hz
[ 14.699] (II) NOUVEAU(0): Modeline "640x480"x60.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 14.699] (**) NOUVEAU(0): Driver mode "720x400": 28.3 MHz (scaled from 0.0 MHz), 31.5 kHz, 70.1 Hz
[ 14.699] (II) NOUVEAU(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
[ 14.699] (==) NOUVEAU(0): DPI set to (96, 96)
[ 14.699] (II) Loading sub module "fb"
[ 14.699] (II) LoadModule: "fb"
[ 14.699] (II) Loading /usr/lib64/xorg/modules/libfb.so
[ 14.700] (II) Module fb: vendor="X.Org Foundation"
[ 14.700] compiled for 1.14.2.902, module version = 1.0.0
[ 14.700] ABI class: X.Org ANSI C Emulation, version 0.4
[ 14.700] (II) Loading sub module "exa"
[ 14.700] (II) LoadModule: "exa"
[ 14.700] (II) Loading /usr/lib64/xorg/modules/libexa.so
[ 14.700] (II) Module exa: vendor="X.Org Foundation"
[ 14.700] compiled for 1.14.2.902, module version = 2.6.0
[ 14.700] ABI class: X.Org Video Driver, version 14.1
[ 14.700] (II) Loading sub module "shadowfb"
[ 14.700] (II) LoadModule: "shadowfb"
[ 14.701] (II) Loading /usr/lib64/xorg/modules/libshadowfb.so
[ 14.701] (II) Module shadowfb: vendor="X.Org Foundation"
[ 14.701] compiled for 1.14.2.902, module version = 1.0.0
[ 14.701] ABI class: X.Org ANSI C Emulation, version 0.4
[ 14.701] (--) Depth 24 pixmap format is 32 bpp
[ 14.702] (II) NOUVEAU(0): Opened GPU channel 0
[ 14.797] (II) NOUVEAU(0): [DRI2] Setup complete
[ 14.797] (II) NOUVEAU(0): [DRI2] DRI driver: nouveau
[ 14.797] (II) NOUVEAU(0): [DRI2] VDPAU driver: nouveau
[ 14.798] (II) EXA(0): Driver allocated offscreen pixmaps
[ 14.798] (II) EXA(0): Driver registered support for the following operations:
[ 14.798] (II) Solid
[ 14.798] (II) Copy
[ 14.798] (II) Composite (RENDER acceleration)
[ 14.798] (II) UploadToScreen
[ 14.798] (II) DownloadFromScreen
[ 14.798] (==) NOUVEAU(0): Backing store disabled
[ 14.798] (==) NOUVEAU(0): Silken mouse enabled
[ 14.798] (II) NOUVEAU(0): [XvMC] Associated with Nouveau GeForce 8/9 Textured Video.
[ 14.798] (II) NOUVEAU(0): [XvMC] Extension initialized.
[ 14.798] (==) NOUVEAU(0): DPMS enabled
[ 14.798] (II) NOUVEAU(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 14.799] (--) RandR disabled
[ 16.838] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[ 16.838] (II) AIGLX: enabled GLX_INTEL_swap_event
[ 16.838] (II) AIGLX: enabled GLX_ARB_create_context
[ 16.838] (II) AIGLX: enabled GLX_ARB_create_context_profile
[ 16.838] (II) AIGLX: enabled GLX_EXT_create_context_es2_profile
[ 16.838] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[ 16.838] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[ 16.839] (II) AIGLX: Loaded and initialized nouveau
[ 16.839] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 31.839] (II) NOUVEAU(0): NVEnterVT is called.
[ 31.862] (II) NOUVEAU(0): Setting screen physical size to 508 x 317
[ 31.862] resize called 1920 1200
[ 31.899] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[ 31.899] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 31.899] (**) Power Button: Applying InputClass "keyboard-all"
[ 31.899] (II) LoadModule: "evdev"
[ 31.899] (II) Loading /usr/lib64/xorg/modules/input/evdev_drv.so
[ 31.900] (II) Module evdev: vendor="X.Org Foundation"
[ 31.900] compiled for 1.14.2.902, module version = 2.8.1
[ 31.900] Module class: X.Org XInput Driver
[ 31.900] ABI class: X.Org XInput driver, version 19.1
[ 31.900] (II) Using input driver 'evdev' for 'Power Button'
[ 31.900] (**) Power Button: always reports core events
[ 31.900] (**) evdev: Power Button: Device: "/dev/input/event1"
[ 31.900] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 31.900] (--) evdev: Power Button: Found keys
[ 31.900] (II) evdev: Power Button: Configuring as keyboard
[ 31.900] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input1/event1"
[ 31.900] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 31.900] (**) Option "xkb_rules" "evdev"
[ 31.900] (**) Option "xkb_model" "pc104"
[ 31.900] (**) Option "xkb_layout" "dk"
[ 31.900] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[ 31.915] (II) config/udev: Adding input device Power Button (/dev/input/event0)
[ 31.915] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 31.915] (**) Power Button: Applying InputClass "keyboard-all"
[ 31.915] (II) Using input driver 'evdev' for 'Power Button'
[ 31.915] (**) Power Button: always reports core events
[ 31.915] (**) evdev: Power Button: Device: "/dev/input/event0"
[ 31.915] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 31.915] (--) evdev: Power Button: Found keys
[ 31.915] (II) evdev: Power Button: Configuring as keyboard
[ 31.915] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0/event0"
[ 31.915] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
[ 31.915] (**) Option "xkb_rules" "evdev"
[ 31.915] (**) Option "xkb_model" "pc104"
[ 31.915] (**) Option "xkb_layout" "dk"
[ 31.915] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[ 31.916] (II) config/udev: Adding drm device (/dev/dri/card0)
[ 31.916] (II) config/udev: Adding input device daskeyboard (/dev/input/event2)
[ 31.916] (**) daskeyboard: Applying InputClass "evdev keyboard catchall"
[ 31.916] (**) daskeyboard: Applying InputClass "keyboard-all"
[ 31.916] (II) Using input driver 'evdev' for 'daskeyboard'
[ 31.916] (**) daskeyboard: always reports core events
[ 31.916] (**) evdev: daskeyboard: Device: "/dev/input/event2"
[ 31.916] (--) evdev: daskeyboard: Vendor 0x4d9 Product 0x2013
[ 31.916] (--) evdev: daskeyboard: Found keys
[ 31.916] (II) evdev: daskeyboard: Configuring as keyboard
[ 31.916] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:12.0/usb4/4-5/4-5:1.0/input/input2/event2"
[ 31.916] (II) XINPUT: Adding extended input device "daskeyboard" (type: KEYBOARD, id
[ 31.916] (**) Option "xkb_rules" "evdev"
[ 31.916] (**) Option "xkb_model" "pc104"
[ 31.916] (**) Option "xkb_layout" "dk"
[ 31.916] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[ 31.916] (II) config/udev: Adding input device daskeyboard (/dev/input/event3)
[ 31.916] (**) daskeyboard: Applying InputClass "evdev keyboard catchall"
[ 31.916] (**) daskeyboard: Applying InputClass "keyboard-all"
[ 31.916] (II) Using input driver 'evdev' for 'daskeyboard'
[ 31.916] (**) daskeyboard: always reports core events
[ 31.916] (**) evdev: daskeyboard: Device: "/dev/input/event3"
[ 31.916] (--) evdev: daskeyboard: Vendor 0x4d9 Product 0x2013
[ 31.916] (--) evdev: daskeyboard: Found keys
[ 31.916] (II) evdev: daskeyboard: Configuring as keyboard
[ 31.916] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:12.0/usb4/4-5/4-5:1.1/input/input3/event3"
[ 31.916] (II) XINPUT: Adding extended input device "daskeyboard" (type: KEYBOARD, id 9)
[ 31.916] (**) Option "xkb_rules" "evdev"
[ 31.916] (**) Option "xkb_model" "pc104"
[ 31.916] (**) Option "xkb_layout" "dk"
[ 31.916] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[ 31.917] (II) config/udev: Adding input device Logitech USB Laser Mouse (/dev/input/event4)
[ 31.917] (**) Logitech USB Laser Mouse: Applying InputClass "evdev pointer catchall"
[ 31.917] (II) Using input driver 'evdev' for 'Logitech USB Laser Mouse'
[ 31.917] (**) Logitech USB Laser Mouse: always reports core events
[ 31.917] (**) evdev: Logitech USB Laser Mouse: Device: "/dev/input/event4"
[ 31.917] (--) evdev: Logitech USB Laser Mouse: Vendor 0x46d Product 0xc069
[ 31.917] (--) evdev: Logitech USB Laser Mouse: Found 12 mouse buttons
[ 31.917] (--) evdev: Logitech USB Laser Mouse: Found scroll wheel(s)
[ 31.917] (--) evdev: Logitech USB Laser Mouse: Found relative axes
[ 31.917] (--) evdev: Logitech USB Laser Mouse: Found x and y relative axes
[ 31.917] (II) evdev: Logitech USB Laser Mouse: Configuring as mouse
[ 31.917] (II) evdev: Logitech USB Laser Mouse: Adding scrollwheel support
[ 31.917] (**) evdev: Logitech USB Laser Mouse: YAxisMapping: buttons 4 and 5
[ 31.917] (**) evdev: Logitech USB Laser Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 31.917] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:12.2/usb1/1-4/1-4.1/1-4.1:1.0/input/input4/event4"
[ 31.917] (II) XINPUT: Adding extended input device "Logitech USB Laser Mouse" (type: MOUSE, id 10)
[ 31.917] (II) evdev: Logitech USB Laser Mouse: initialized for relative axes.
[ 31.917] (**) Logitech USB Laser Mouse: (accel) keeping acceleration scheme 1
[ 31.917] (**) Logitech USB Laser Mouse: (accel) acceleration profile 0
[ 31.917] (**) Logitech USB Laser Mouse: (accel) acceleration factor: 2.000
[ 31.917] (**) Logitech USB Laser Mouse: (accel) acceleration threshold: 4
[ 31.917] (II) config/udev: Adding input device Logitech USB Laser Mouse (/dev/input/mouse0)
[ 31.917] (II) No input driver specified, ignoring this device.
[ 31.917] (II) This device may have been added with another device file.
(EE) [mi] EQ overflowing. Additional events will be discarded until existing events are processed.
(EE)
(EE) Backtrace:
(EE) 0: /usr/bin/X (xorg_backtrace+0x36) [0x5867f6]
(EE) 1: /usr/bin/X (mieqEnqueue+0x223) [0x567ca3]
(EE) 2: /usr/bin/X (0x400000+0x4f2da) [0x44f2da]
(EE) 3: /usr/lib64/xorg/modules/input/evdev_drv.so (0x7fa75af30000+0x6871) [0x7fa75af36871]
(EE) 4: /usr/bin/X (0x400000+0x784f8) [0x4784f8]
(EE) 5: /usr/bin/X (0x400000+0xa0f6c) [0x4a0f6c]
(EE) 6: /lib64/libpthread.so.0 (0x7fa75fb50000+0x10f50) [0x7fa75fb60f50]
(EE) 7: /lib64/libc.so.6 (ioctl+0x7) [0x7fa75ea8d2c7]
(EE) 8: /usr/lib64/libdrm.so.2 (drmIoctl+0x30) [0x7fa75f944230]
(EE) 9: /usr/lib64/libdrm.so.2 (drmCommandWrite+0x1b) [0x7fa75f94679b]
(EE) 10: /usr/lib64/libdrm_nouveau.so.2 (nouveau_bo_wait+0x89) [0x7fa75d602989]
(EE) 11: /usr/lib64/xorg/modules/drivers/nouveau_drv.so (0x7fa75d808000+0x7b6b) [0x7fa75d80fb6b]
(EE) 12: /usr/lib64/xorg/modules/libexa.so (0x7fa75d1c0000+0x615b) [0x7fa75d1c615b]
(EE) 13: /usr/lib64/xorg/modules/libexa.so (0x7fa75d1c0000+0x88f2) [0x7fa75d1c88f2]
(EE) 14: /usr/lib64/xorg/modules/libexa.so (0x7fa75d1c0000+0x5679) [0x7fa75d1c5679]
(EE) 15: /usr/bin/X (0x400000+0xc6411) [0x4c6411]
(EE) 16: /usr/bin/X (ChangeWindowAttributes+0x221) [0x468461]
(EE) 17: /usr/bin/X (0x400000+0x358a5) [0x4358a5]
(EE) 18: /usr/bin/X (0x400000+0x3afb6) [0x43afb6]
(EE) 19: /usr/bin/X (0x400000+0x29f4d) [0x429f4d]
(EE) 20: /lib64/libc.so.6 (__libc_start_main+0xf5) [0x7fa75e9ccc15]
(EE) 21: /usr/bin/X (0x400000+0x2a2c1) [0x42a2c1]
(EE)
(EE) [mi] These backtraces from mieqEnqueue may point to a culprit higher up the stack.
(EE) [mi] mieq is *NOT* the cause. It is a victim.
(EE) [mi] EQ overflow continuing. 100 events have been dropped.
(EE)
(EE) Backtrace:
(EE) 0: /usr/bin/X (xorg_backtrace+0x36) [0x5867f6]
(EE) 1: /usr/bin/X (0x400000+0x4f2da) [0x44f2da]
(EE) 2: /usr/lib64/xorg/modules/input/evdev_drv.so (0x7fa75af30000+0x6871) [0x7fa75af36871]
(EE) 3: /usr/bin/X (0x400000+0x784f8) [0x4784f8]
(EE) 4: /usr/bin/X (0x400000+0xa0f6c) [0x4a0f6c]
(EE) 5: /lib64/libpthread.so.0 (0x7fa75fb50000+0x10f50) [0x7fa75fb60f50]
(EE) 6: /lib64/libc.so.6 (ioctl+0x7) [0x7fa75ea8d2c7]
(EE) 7: /usr/lib64/libdrm.so.2 (drmIoctl+0x30) [0x7fa75f944230]
(EE) 8: /usr/lib64/libdrm.so.2 (drmCommandWrite+0x1b) [0x7fa75f94679b]
(EE) 9: /usr/lib64/libdrm_nouveau.so.2 (nouveau_bo_wait+0x89) [0x7fa75d602989]
(EE) 10: /usr/lib64/xorg/modules/drivers/nouveau_drv.so (0x7fa75d808000+0x7b6b) [0x7fa75d80fb6b]
(EE) 11: /usr/lib64/xorg/modules/libexa.so (0x7fa75d1c0000+0x615b) [0x7fa75d1c615b]
(EE) 12: /usr/lib64/xorg/modules/libexa.so (0x7fa75d1c0000+0x88f2) [0x7fa75d1c88f2]
(EE) 13: /usr/lib64/xorg/modules/libexa.so (0x7fa75d1c0000+0x5679) [0x7fa75d1c5679]
(EE) 14: /usr/bin/X (0x400000+0xc6411) [0x4c6411]
(EE) 15: /usr/bin/X (ChangeWindowAttributes+0x221) [0x468461]
(EE) 16: /usr/bin/X (0x400000+0x358a5) [0x4358a5]
(EE) 17: /usr/bin/X (0x400000+0x3afb6) [0x43afb6]
(EE) 18: /usr/bin/X (0x400000+0x29f4d) [0x429f4d]
(EE) 19: /lib64/libc.so.6 (__libc_start_main+0xf5) [0x7fa75e9ccc15]
(EE) 20: /usr/bin/X (0x400000+0x2a2c1) [0x42a2c1]
(EE)
[ 47.043] [mi] Increasing EQ size to 512 to prevent dropped events.
[ 47.043] [mi] EQ processing has resumed after 126 dropped events.
[ 47.043] [mi] This may be caused my a misbehaving driver monopolizing the server's resources.
[ 91.402] (II) AIGLX: Suspending AIGLX clients for VT switch
[ 91.402] (II) NOUVEAU(0): NVLeaveVT is called.
[ 212.828] (II) evdev: Logitech USB Laser Mouse: Close
[ 212.828] (II) UnloadModule: "evdev"
[ 212.828] (II) evdev: daskeyboard: Close
[ 212.828] (II) UnloadModule: "evdev"
[ 212.828] (II) evdev: daskeyboard: Close
[ 212.828] (II) UnloadModule: "evdev"
[ 212.828] (II) evdev: Power Button: Close
[ 212.828] (II) UnloadModule: "evdev"
[ 212.828] (II) evdev: Power Button: Close
[ 212.828] (II) UnloadModule: "evdev"
lspci:
00:00.0 Host bridge: Advanced Micro Devices, Inc. [AMD/ATI] RD890 PCI to PCI bridge (external gfx0 port B) (rev 02)
00:00.2 IOMMU: Advanced Micro Devices, Inc. [AMD/ATI] RD990 I/O Memory Management Unit (IOMMU)
00:02.0 PCI bridge: Advanced Micro Devices, Inc. [AMD/ATI] RD890 PCI to PCI bridge (PCI express gpp port B)
00:04.0 PCI bridge: Advanced Micro Devices, Inc. [AMD/ATI] RD890 PCI to PCI bridge (PCI express gpp port D)
00:05.0 PCI bridge: Advanced Micro Devices, Inc. [AMD/ATI] RD890 PCI to PCI bridge (PCI express gpp port E)
00:09.0 PCI bridge: Advanced Micro Devices, Inc. [AMD/ATI] RD890 PCI to PCI bridge (PCI express gpp port H)
00:0a.0 PCI bridge: Advanced Micro Devices, Inc. [AMD/ATI] RD890 PCI to PCI bridge (external gfx1 port A)
00:0b.0 PCI bridge: Advanced Micro Devices, Inc. [AMD/ATI] RD890 PCI to PCI bridge (NB-SB link)
00:11.0 SATA controller: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 SATA Controller [AHCI mode] (rev 40)
00:12.0 USB controller: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB OHCI0 Controller
00:12.2 USB controller: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB EHCI Controller
00:13.0 USB controller: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB OHCI0 Controller
00:13.2 USB controller: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB EHCI Controller
00:14.0 SMBus: Advanced Micro Devices, Inc. [AMD/ATI] SBx00 SMBus Controller (rev 42)
00:14.2 Audio device: Advanced Micro Devices, Inc. [AMD/ATI] SBx00 Azalia (Intel HDA) (rev 40)
00:14.3 ISA bridge: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 LPC host controller (rev 40)
00:14.4 PCI bridge: Advanced Micro Devices, Inc. [AMD/ATI] SBx00 PCI to PCI Bridge (rev 40)
00:14.5 USB controller: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB OHCI2 Controller
00:15.0 PCI bridge: Advanced Micro Devices, Inc. [AMD/ATI] SB700/SB800/SB900 PCI to PCI bridge (PCIE port 0)
00:15.1 PCI bridge: Advanced Micro Devices, Inc. [AMD/ATI] SB700/SB800/SB900 PCI to PCI bridge (PCIE port 1)
00:15.2 PCI bridge: Advanced Micro Devices, Inc. [AMD/ATI] SB900 PCI to PCI bridge (PCIE port 2)
00:15.3 PCI bridge: Advanced Micro Devices, Inc. [AMD/ATI] SB900 PCI to PCI bridge (PCIE port 3)
00:16.0 USB controller: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB OHCI0 Controller
00:16.2 USB controller: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB EHCI Controller
00:18.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 15h Processor Function 0
00:18.1 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 15h Processor Function 1
00:18.2 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 15h Processor Function 2
00:18.3 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 15h Processor Function 3
00:18.4 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 15h Processor Function 4
00:18.5 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 15h Processor Function 5
01:00.0 PCI bridge: PLX Technology, Inc. Device 8747 (rev ba)
02:08.0 PCI bridge: PLX Technology, Inc. Device 8747 (rev ba)
02:10.0 PCI bridge: PLX Technology, Inc. Device 8747 (rev ba)
02:11.0 PCI bridge: PLX Technology, Inc. Device 8747 (rev ba)
03:00.0 VGA compatible controller: NVIDIA Corporation GF108 [GeForce GT 630] (rev a1)
03:00.1 Audio device: NVIDIA Corporation GF108 High Definition Audio Controller (rev a1)
05:00.0 RAID bus controller: LSI Logic / Symbios Logic MegaRAID SAS 2108 [Liberator] (rev 05)
06:00.0 SATA controller: ASMedia Technology Inc. ASM1062 Serial ATA Controller (rev 01)
07:00.0 SATA controller: ASMedia Technology Inc. ASM1062 Serial ATA Controller (rev 01)
08:00.0 USB controller: ASMedia Technology Inc. ASM1042 SuperSpeed USB Host Controller
0d:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 09)
0e:00.0 USB controller: ASMedia Technology Inc. ASM1042 SuperSpeed USB Host Controller
0f:00.0 USB controller: ASMedia Technology Inc. ASM1042 SuperSpeed USB Host Controller
Let me know if any further info is needed. Everything works as intended up to 3.10.10 and I really like the 3.11 boot logo
Any help appreciated.
/Søren |
|