| View previous topic :: View next topic |
| Author |
Message |
agszepp
n00b
Joined: 30 Jan 2014
Posts: 8
|
 Posted: Fri Jan 31, 2014 10:00 pm Post subject: X won't start |
 |
|
Hello, I just installed Gentoo for the first time. I also installed X, but it won't start.
Here's my Xorg.0.log:
| Code: |
[ 926.535]
X.Org X Server 1.14.3
Release Date: 2013-09-12
[ 926.589] X Protocol Version 11, Revision 0
[ 926.606] Build Operating System: Linux 3.10.25-gentoo x86_64 Gentoo
[ 926.624] Current Operating System: Linux gentoo 3.10.25-gentoo #1 SMP Mon Jan 27 12:41:53 EST 2014 x86_64
[ 926.624] Kernel command line: BOOT_IMAGE=/kernel-genkernel-x86_64-3.10.25-gentoo root=UUID=7554e0c1-e320-4b40-8515-8c981d7ca6b7 ro
[ 926.662] Build Date: 28 January 2014 10:43:42PM
[ 926.681]
[ 926.699] Current version of pixman: 0.32.4
[ 926.737] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 926.737] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 926.814] (==) Log file: "/var/log/Xorg.0.log", Time: Fri Jan 31 21:32:18 2014
[ 926.834] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 926.834] (==) No Layout section. Using the first Screen section.
[ 926.834] (==) No screen section available. Using defaults.
[ 926.834] (**) |-->Screen "Default Screen Section" (0)
[ 926.834] (**) | |-->Monitor "<default monitor>"
[ 926.834] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 926.834] (==) Automatically adding devices
[ 926.834] (==) Automatically enabling devices
[ 926.834] (==) Automatically adding GPU devices
[ 926.834] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/OTF/,
/usr/share/fonts/Type1/,
/usr/share/fonts/100dpi/,
/usr/share/fonts/75dpi/
[ 926.834] (==) ModulePath set to "/usr/lib64/xorg/modules"
[ 926.834] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 926.834] (II) Loader magic: 0x7fec00
[ 926.834] (II) Module ABI versions:
[ 926.834] X.Org ANSI C Emulation: 0.4
[ 926.834] X.Org Video Driver: 14.1
[ 926.834] X.Org XInput driver : 19.1
[ 926.834] X.Org Server Extension : 7.0
[ 926.835] (--) PCI:*(0:0:2:0) 8086:0a16:1028:05e9 rev 9, Mem @ 0xb0000000/4194304, 0xa0000000/268435456, I/O @ 0x00004000/64
[ 926.854] Initializing built-in extension Generic Event Extension
[ 926.874] Initializing built-in extension SHAPE
[ 926.893] Initializing built-in extension MIT-SHM
[ 926.912] Initializing built-in extension XInputExtension
[ 926.931] Initializing built-in extension XTEST
[ 926.949] Initializing built-in extension BIG-REQUESTS
[ 926.968] Initializing built-in extension SYNC
[ 926.986] Initializing built-in extension XKEYBOARD
[ 927.003] Initializing built-in extension XC-MISC
[ 927.020] Initializing built-in extension XINERAMA
[ 927.037] Initializing built-in extension XFIXES
[ 927.053] Initializing built-in extension RENDER
[ 927.069] Initializing built-in extension RANDR
[ 927.085] Initializing built-in extension COMPOSITE
[ 927.101] Initializing built-in extension DAMAGE
[ 927.116] Initializing built-in extension MIT-SCREEN-SAVER
[ 927.131] Initializing built-in extension DOUBLE-BUFFER
[ 927.146] Initializing built-in extension RECORD
[ 927.160] Initializing built-in extension DPMS
[ 927.174] Initializing built-in extension X-Resource
[ 927.188] Initializing built-in extension XVideo
[ 927.202] Initializing built-in extension XVideo-MotionCompensation
[ 927.215] Initializing built-in extension XFree86-VidModeExtension
[ 927.228] Initializing built-in extension XFree86-DGA
[ 927.241] Initializing built-in extension XFree86-DRI
[ 927.253] Initializing built-in extension DRI2
[ 927.253] (II) LoadModule: "glx"
[ 927.253] (II) Loading /usr/lib64/xorg/modules/extensions/libglx.so
[ 927.253] (II) Module glx: vendor="X.Org Foundation"
[ 927.253] compiled for 1.14.3, module version = 1.0.0
[ 927.253] ABI class: X.Org Server Extension, version 7.0
[ 927.253] (==) AIGLX enabled
[ 927.266] Loading extension GLX
[ 927.266] (==) Matched intel as autoconfigured driver 0
[ 927.266] (==) Matched vesa as autoconfigured driver 1
[ 927.266] (==) Matched modesetting as autoconfigured driver 2
[ 927.266] (==) Matched fbdev as autoconfigured driver 3
[ 927.266] (==) Assigned the driver to the xf86ConfigLayout
[ 927.266] (II) LoadModule: "intel"
[ 927.266] (II) Loading /usr/lib64/xorg/modules/drivers/intel_drv.so
[ 927.266] (II) Module intel: vendor="X.Org Foundation"
[ 927.266] compiled for 1.14.3, module version = 2.21.15
[ 927.266] Module class: X.Org Video Driver
[ 927.266] ABI class: X.Org Video Driver, version 14.1
[ 927.266] (II) LoadModule: "vesa"
[ 927.266] (WW) Warning, couldn't open module vesa
[ 927.266] (II) UnloadModule: "vesa"
[ 927.266] (II) Unloading vesa
[ 927.266] (EE) Failed to load module "vesa" (module does not exist, 0)
[ 927.266] (II) LoadModule: "modesetting"
[ 927.266] (WW) Warning, couldn't open module modesetting
[ 927.266] (II) UnloadModule: "modesetting"
[ 927.266] (II) Unloading modesetting
[ 927.266] (EE) Failed to load module "modesetting" (module does not exist, 0)
[ 927.266] (II) LoadModule: "fbdev"
[ 927.267] (WW) Warning, couldn't open module fbdev
[ 927.267] (II) UnloadModule: "fbdev"
[ 927.267] (II) Unloading fbdev
[ 927.267] (EE) Failed to load module "fbdev" (module does not exist, 0)
[ 927.267] (II) intel: Driver for Intel(R) Integrated Graphics Chipsets:
i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G,
915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM,
Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33,
GM45, 4 Series, G45/G43, Q45/Q43, G41, B43, HD Graphics,
HD Graphics 2000, HD Graphics 3000, HD Graphics 2500,
HD Graphics 4000, HD Graphics P4000, HD Graphics 4600,
HD Graphics 5000, HD Graphics P4600/P4700, Iris(TM) Graphics 5100,
HD Graphics 4400, HD Graphics 4200, Iris(TM) Pro Graphics 5200
[ 927.267] (--) using VT number 7
[ 927.336] (EE) No devices detected.
[ 927.336] (EE)
Fatal server error:
[ 927.336] (EE) no screens found(EE)
[ 927.336] (EE)
Please consult the The X.Org Foundation support
at http://wiki.x.org
for help.
[ 927.336] (EE) Please also check the log file at "/var/log/Xorg.0.log" for additional information.
[ 927.336] (EE)
|
My dmesg:
| Code: |
[ 0.697392] pci 0000:00:1c.0: System wakeup disabled by ACPI
[ 0.697457] pci 0000:00:1c.3: [8086:9c16] type 01 class 0x060400
[ 0.697524] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[ 0.697695] pci 0000:00:1d.0: [8086:9c26] type 00 class 0x0c0320
[ 0.697937] pci 0000:00:1d.0: reg 10: [mem 0xb071c000-0xb071c3ff]
[ 0.699312] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 0.699433] pci 0000:00:1d.0: System wakeup disabled by ACPI
[ 0.699505] pci 0000:00:1f.0: [8086:9c43] type 00 class 0x060100
[ 0.699776] pci 0000:00:1f.2: [8086:9c03] type 00 class 0x010601
[ 0.699792] pci 0000:00:1f.2: reg 10: [io 0x4088-0x408f]
[ 0.699800] pci 0000:00:1f.2: reg 14: [io 0x4094-0x4097]
[ 0.699808] pci 0000:00:1f.2: reg 18: [io 0x4080-0x4087]
[ 0.699815] pci 0000:00:1f.2: reg 1c: [io 0x4090-0x4093]
[ 0.699823] pci 0000:00:1f.2: reg 20: [io 0x4060-0x407f]
[ 0.699830] pci 0000:00:1f.2: reg 24: [mem 0xb071b000-0xb071b7ff]
[ 0.699868] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.700023] pci 0000:00:1f.3: [8086:9c22] type 00 class 0x0c0500
[ 0.700040] pci 0000:00:1f.3: reg 10: [mem 0xb0719000-0xb07190ff 64bit]
[ 0.700061] pci 0000:00:1f.3: reg 20: [io 0x4040-0x405f]
[ 0.700327] pci 0000:01:00.0: [10ec:8136] type 00 class 0x020000
[ 0.700353] pci 0000:01:00.0: reg 10: [io 0x3000-0x30ff]
[ 0.700387] pci 0000:01:00.0: reg 18: [mem 0xb0600000-0xb0600fff 64bit]
[ 0.700410] pci 0000:01:00.0: reg 20: [mem 0xb0400000-0xb0403fff 64bit pref]
[ 0.700500] pci 0000:01:00.0: supports D1 D2
[ 0.700502] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.715341] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 0.715347] pci 0000:00:1c.0: bridge window [io 0x3000-0x3fff]
[ 0.715350] pci 0000:00:1c.0: bridge window [mem 0xb0600000-0xb06fffff]
[ 0.715355] pci 0000:00:1c.0: bridge window [mem 0xb0400000-0xb04fffff 64bit pref]
[ 0.715462] pci 0000:02:00.0: [168c:0036] type 00 class 0x028000
[ 0.715496] pci 0000:02:00.0: reg 10: [mem 0xb0500000-0xb057ffff 64bit]
[ 0.715574] pci 0000:02:00.0: reg 30: [mem 0xffff0000-0xffffffff pref]
[ 0.715656] pci 0000:02:00.0: supports D1 D2
[ 0.715657] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.735364] pci 0000:00:1c.3: PCI bridge to [bus 02]
[ 0.735371] pci 0000:00:1c.3: bridge window [mem 0xb0500000-0xb05fffff]
[ 0.735386] pci_bus 0000:00: on NUMA node 0
[ 0.735494] acpi PNP0A08:00: Requesting ACPI _OSC control (0x1d)
[ 0.735920] acpi PNP0A08:00: ACPI _OSC control (0x1d) granted
[ 0.795952] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.796013] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.796072] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.796129] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 *10 11 12 14 15)
[ 0.796185] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.796243] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.796302] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 *10 11 12 14 15)
[ 0.796359] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.796908] ACPI: Enabled 5 GPEs in block 00 to 7F
[ 0.796918] acpi root: \_SB_.PCI0 notify handler is installed
[ 0.796992] Found 1 acpi root devices
[ 0.797035] ACPI: EC: GPE = 0xa, I/O: command/status = 0x66, data = 0x62
[ 0.797165] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.797171] vgaarb: loaded
[ 0.797172] vgaarb: bridge control possible 0000:00:02.0
[ 0.797335] SCSI subsystem initialized
[ 0.797535] PCI: Using ACPI for IRQ routing
[ 0.803548] PCI: pci_cache_line_size set to 64 bytes
[ 0.803585] e820: reserve RAM buffer [mem 0x0009d400-0x0009ffff]
[ 0.803587] e820: reserve RAM buffer [mem 0x8a960000-0x8bffffff]
[ 0.803588] e820: reserve RAM buffer [mem 0x90abf000-0x93ffffff]
[ 0.803590] e820: reserve RAM buffer [mem 0x91000000-0x93ffffff]
[ 0.803591] e820: reserve RAM buffer [mem 0x25f600000-0x25fffffff]
[ 0.803799] Switching to clocksource hpet
[ 0.807897] pnp: PnP ACPI init
[ 0.807909] ACPI: bus type PNP registered
[ 0.807939] pnp 00:00: [dma 4]
[ 0.807993] pnp 00:00: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.808047] pnp 00:01: Plug and Play ACPI device, IDs INT0800 (active)
[ 0.808207] pnp 00:02: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.808288] system 00:03: [io 0x0680-0x069f] has been reserved
[ 0.808293] system 00:03: [io 0xfd60-0xfd63] has been reserved
[ 0.808296] system 00:03: [io 0xffff] has been reserved
[ 0.808299] system 00:03: [io 0xffff] has been reserved
[ 0.808302] system 00:03: [io 0xffff] has been reserved
[ 0.808305] system 00:03: [io 0x1800-0x18fe] has been reserved
[ 0.808308] system 00:03: [io 0x164e-0x164f] has been reserved
[ 0.808313] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.808401] pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.808487] system 00:05: [io 0x1854-0x1857] has been reserved
[ 0.808492] system 00:05: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[ 0.808585] pnp 00:06: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.808655] pnp 00:07: Plug and Play ACPI device, IDs DLL05eb PNP0f13 (active)
[ 0.864030] pnp 00:08: disabling [mem 0xffffffff-0x100000ffe] because it overlaps 0000:02:00.0 BAR 6 [mem 0xffff0000-0xffffffff pref]
[ 0.864090] system 00:08: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.864094] system 00:08: [mem 0xfed10000-0xfed17fff] has been reserved
[ 0.864098] system 00:08: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.864101] system 00:08: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.864105] system 00:08: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.864108] system 00:08: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.864112] system 00:08: [mem 0xfed90000-0xfed93fff] has been reserved
[ 0.864115] system 00:08: [mem 0xff000000-0xff000fff] has been reserved
[ 0.864119] system 00:08: [mem 0xff010000-0xffffffff] could not be reserved
[ 0.864122] system 00:08: [mem 0xfee00000-0xfeefffff] could not be reserved
[ 0.864126] system 00:08: [mem 0x9fa12000-0x9fa12fff] has been reserved
[ 0.864130] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.864692] pnp: PnP ACPI: found 9 devices
[ 0.864694] ACPI: bus type PNP unregistered
[ 0.869253] pci 0000:02:00.0: no compatible bridge window for [mem 0xffff0000-0xffffffff pref]
[ 0.869275] pci 0000:00:1c.3: BAR 9: assigned [mem 0x9fb00000-0x9fbfffff pref]
[ 0.869279] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 0.869283] pci 0000:00:1c.0: bridge window [io 0x3000-0x3fff]
[ 0.869289] pci 0000:00:1c.0: bridge window [mem 0xb0600000-0xb06fffff]
[ 0.869294] pci 0000:00:1c.0: bridge window [mem 0xb0400000-0xb04fffff 64bit pref]
[ 0.869302] pci 0000:02:00.0: BAR 6: assigned [mem 0x9fb00000-0x9fb0ffff pref]
[ 0.869306] pci 0000:00:1c.3: PCI bridge to [bus 02]
[ 0.869311] pci 0000:00:1c.3: bridge window [mem 0xb0500000-0xb05fffff]
[ 0.869316] pci 0000:00:1c.3: bridge window [mem 0x9fb00000-0x9fbfffff pref]
[ 0.869505] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.869507] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.869509] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.869510] pci_bus 0000:00: resource 7 [mem 0x9fa00000-0xfeafffff]
[ 0.869512] pci_bus 0000:01: resource 0 [io 0x3000-0x3fff]
[ 0.869514] pci_bus 0000:01: resource 1 [mem 0xb0600000-0xb06fffff]
[ 0.869516] pci_bus 0000:01: resource 2 [mem 0xb0400000-0xb04fffff 64bit pref]
[ 0.869518] pci_bus 0000:02: resource 1 [mem 0xb0500000-0xb05fffff]
[ 0.869520] pci_bus 0000:02: resource 2 [mem 0x9fb00000-0x9fbfffff pref]
[ 0.869578] NET: Registered protocol family 2
[ 0.869756] TCP established hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.869896] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.870031] TCP: Hash tables configured (established 65536 bind 65536)
[ 0.870053] TCP: reno registered
[ 0.870057] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.870080] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.870176] NET: Registered protocol family 1
[ 0.870190] pci 0000:00:02.0: Boot video device
[ 0.884001] PCI: CLS 64 bytes, default 64
[ 0.884037] Trying to unpack rootfs image as initramfs...
[ 1.406496] Freeing initrd memory: 3368k freed
[ 1.406924] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 1.406931] software IO TLB [mem 0x8cabf000-0x90abf000] (64MB) mapped at [ffff88008cabf000-ffff880090abefff]
[ 1.406968] Simple Boot Flag at 0x44 set to 0x1
[ 1.407487] audit: initializing netlink socket (disabled)
[ 1.407498] type=2000 audit(1391204821.410:1): initialized
[ 1.407978] VFS: Disk quotas dquot_6.5.2
[ 1.408005] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 1.408227] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 1.408264] SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled
[ 1.408475] OCFS2 1.5.0
[ 1.408534] ocfs2: Registered cluster interface o2cb
[ 1.408537] OCFS2 DLMFS 1.5.0
[ 1.408572] OCFS2 User DLM kernel interface loaded
[ 1.408575] OCFS2 Node Manager 1.5.0
[ 1.408671] OCFS2 DLM 1.5.0
[ 1.408881] GFS2 installed
[ 1.408887] msgmni has been set to 15437
[ 1.409133] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 1.409137] io scheduler noop registered
[ 1.409139] io scheduler deadline registered
[ 1.409154] io scheduler cfq registered (default)
[ 1.409254] pcieport 0000:00:1c.0: irq 56 for MSI/MSI-X
[ 1.409355] pcieport 0000:00:1c.3: irq 57 for MSI/MSI-X
[ 1.409518] pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
[ 1.409522] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt
[ 1.409527] pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded
[ 1.409545] pcieport 0000:00:1c.3: Signaling PME through PCIe PME interrupt
[ 1.409548] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt
[ 1.409553] pcie_pme 0000:00:1c.3:pcie01: service driver pcie_pme loaded
[ 1.409685] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 1.410293] Linux agpgart interface v0.103
[ 1.410457] vesafb: mode is 1366x768x32, linelength=5504, pages=0
[ 1.410460] vesafb: scrolling: redraw
[ 1.410463] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 1.410670] vesafb: framebuffer at 0xa0000000, mapped to 0xffffc90010100000, using 4160k, total 4160k
[ 1.526760] Console: switching to colour frame buffer device 170x48
[ 1.643315] fb0: VESA VGA frame buffer device
[ 1.645829] brd: module loaded
[ 1.647155] loop: module loaded
[ 1.647669] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 1.672868] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.673467] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.674258] mousedev: PS/2 mouse device common for all mice
[ 1.675074] cpuidle: using governor ladder
[ 1.675529] cpuidle: using governor menu
[ 1.676029] hidraw: raw HID events driver (C) Jiri Kosina
[ 1.677196] TCP: cubic registered
[ 1.677525] NET: Registered protocol family 17
[ 1.678520] registered taskstats version 1
[ 1.679329] drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
[ 1.680263] Freeing unused kernel memory: 804k freed
[ 1.696378] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 1.768555] ACPI: bus type ATA registered
[ 1.768805] libata version 3.00 loaded.
[ 2.405121] tsc: Refined TSC clocksource calibration: 2394.457 MHz
[ 2.405126] Switching to clocksource tsc
[ 2.613485] psmouse serio1: synaptics: Touchpad model: 1, fw: 8.1, id: 0x1e2b1, caps: 0xd00123/0x840300/0x26c00, board id: 2382, fw id: 1238635
[ 2.685233] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input1
[ 3.713146] ahci 0000:00:1f.2: version 3.0
[ 3.713300] ahci 0000:00:1f.2: irq 58 for MSI/MSI-X
[ 3.726193] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 3 ports 6 Gbps 0x3 impl SATA mode
[ 3.726197] ahci 0000:00:1f.2: flags: 64bit ncq led clo only pio slum part deso sadm sds apst
[ 3.726201] ahci 0000:00:1f.2: setting latency timer to 64
[ 3.727015] scsi0 : ahci
[ 3.727212] scsi1 : ahci
[ 3.727373] scsi2 : ahci
[ 3.727553] ata1: SATA max UDMA/133 abar m2048@0xb071b000 port 0xb071b100 irq 58
[ 3.727556] ata2: SATA max UDMA/133 abar m2048@0xb071b000 port 0xb071b180 irq 58
[ 3.727558] ata3: DUMMY
[ 4.076485] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 4.076504] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 4.077306] ata1.00: ATA-9: WDC WD10JPVX-75JC3T0, 01.01A01, max UDMA/133
[ 4.077309] ata1.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
[ 4.078089] ata1.00: configured for UDMA/133
[ 4.078189] scsi 0:0:0:0: Direct-Access ATA WDC WD10JPVX-75J 01.0 PQ: 0 ANSI: 5
[ 4.078478] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[ 4.078481] sd 0:0:0:0: [sda] 4096-byte physical blocks
[ 4.078523] sd 0:0:0:0: [sda] Write Protect is off
[ 4.078526] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 4.078544] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 4.079962] ata2.00: ATAPI: MATSHITA DVD+/-RW UJ8DB, D.03, max UDMA/100
[ 4.082374] ata2.00: configured for UDMA/100
[ 4.083857] scsi 1:0:0:0: CD-ROM MATSHITA DVD+-RW UJ8DB D.03 PQ: 0 ANSI: 5
[ 4.091493] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 4.091495] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 4.091695] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 4.179599] sda: sda1 sda2 sda3 sda4
[ 4.180187] sd 0:0:0:0: [sda] Attached SCSI disk
[ 4.424776] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 4.424870] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 4.758558] scsi: <fdomain> Detection failed (no card)
[ 4.855328] GDT-HA: Storage RAID Controller Driver. Version: 3.05
[ 5.026400] imm: Version 2.05 (for Linux 2.4.0)
[ 5.296139] Fusion MPT base driver 3.04.20
[ 5.296141] Copyright (c) 1999-2008 LSI Corporation
[ 5.396808] Fusion MPT SPI Host driver 3.04.20
[ 5.461151] Fusion MPT FC Host driver 3.04.20
[ 5.519627] Fusion MPT SAS Host driver 3.04.20
[ 5.569841] 3ware Storage Controller device driver for Linux v1.26.02.003.
[ 5.620434] 3ware 9000 Storage Controller device driver for Linux v2.26.02.014.
[ 5.671291] Compaq SMART2 Driver (v 2.6.0)
[ 5.760894] HP CISS Driver (v 3.6.26)
[ 5.915889] Adaptec aacraid driver 1.2-0[30200]-ms
[ 6.024757] megaraid cmm: 2.20.2.7 (Release Date: Sun Jul 16 00:01:03 EST 2006)
[ 6.026310] megaraid: 2.20.5.1 (Release Date: Thu Nov 16 15:32:35 EST 2006)
[ 6.114350] megasas: 06.506.00.00-rc1 Sat. Feb. 9 17:00:00 PDT 2013
[ 6.171627] qla2xxx [0000:00:00.0]-0005: : QLogic Fibre Channel HBA Driver: 8.05.00.03-k.
[ 6.234096] Emulex LightPulse Fibre Channel SCSI driver 8.3.39
[ 6.234098] Copyright(c) 2004-2009 Emulex. All rights reserved.
[ 6.336435] aic94xx: Adaptec aic94xx SAS/SATA driver version 1.0.3 loaded
[ 6.414289] ACPI: bus type USB registered
[ 6.414436] usbcore: registered new interface driver usbfs
[ 6.414493] usbcore: registered new interface driver hub
[ 6.414592] usbcore: registered new device driver usb
[ 6.416555] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 6.418947] ehci-pci: EHCI PCI platform driver
[ 6.419105] ehci-pci 0000:00:1d.0: setting latency timer to 64
[ 6.419113] ehci-pci 0000:00:1d.0: EHCI Host Controller
[ 6.419119] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 1
[ 6.419132] ehci-pci 0000:00:1d.0: debug port 2
[ 6.423022] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[ 6.423040] ehci-pci 0000:00:1d.0: irq 23, io mem 0xb071c000
[ 6.438370] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 6.438389] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 6.438391] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 6.438393] usb usb1: Product: EHCI Host Controller
[ 6.438395] usb usb1: Manufacturer: Linux 3.10.25-gentoo ehci_hcd
[ 6.438396] usb usb1: SerialNumber: 0000:00:1d.0
[ 6.438609] hub 1-0:1.0: USB hub found
[ 6.438614] hub 1-0:1.0: 2 ports detected
[ 6.544112] usbcore: registered new interface driver usb-storage
[ 6.604002] uhci_hcd: USB Universal Host Controller Interface driver
[ 6.664219] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 6.724923] xhci_hcd 0000:00:14.0: setting latency timer to 64
[ 6.724927] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 6.724934] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[ 6.725012] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[ 6.725033] xhci_hcd 0000:00:14.0: irq 59 for MSI/MSI-X
[ 6.725083] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 6.725085] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 6.725087] usb usb2: Product: xHCI Host Controller
[ 6.725089] usb usb2: Manufacturer: Linux 3.10.25-gentoo xhci_hcd
[ 6.725090] usb usb2: SerialNumber: 0000:00:14.0
[ 6.725224] xHCI xhci_add_endpoint called for root hub
[ 6.725226] xHCI xhci_check_bandwidth called for root hub
[ 6.725302] hub 2-0:1.0: USB hub found
[ 6.725314] hub 2-0:1.0: 9 ports detected
[ 6.727179] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 6.727184] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
[ 6.727204] usb usb3: New USB device found, idVendor=1d6b, idProduct=0003
[ 6.727206] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 6.727208] usb usb3: Product: xHCI Host Controller
[ 6.727210] usb usb3: Manufacturer: Linux 3.10.25-gentoo xhci_hcd
[ 6.727211] usb usb3: SerialNumber: 0000:00:14.0
[ 6.727329] xHCI xhci_add_endpoint called for root hub
[ 6.727330] xHCI xhci_check_bandwidth called for root hub
[ 6.727399] hub 3-0:1.0: USB hub found
[ 6.727408] hub 3-0:1.0: 4 ports detected
[ 6.758646] usb 1-1: new high-speed USB device number 2 using ehci-pci
[ 6.850806] usbcore: registered new interface driver usbhid
[ 6.850808] usbhid: USB HID core driver
[ 6.909098] usb 1-1: New USB device found, idVendor=8087, idProduct=8000
[ 6.909102] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 6.909422] hub 1-1:1.0: USB hub found
[ 6.909473] hub 1-1:1.0: 8 ports detected
[ 7.189080] usb 1-1.5: new full-speed USB device number 3 using ehci-pci
[ 7.300169] usb 1-1.5: New USB device found, idVendor=0cf3, idProduct=0036
[ 7.300172] usb 1-1.5: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 7.358368] device-mapper: uevent: version 1.0.3
[ 7.358472] device-mapper: ioctl: 4.24.0-ioctl (2013-01-15) initialised: dm-devel@redhat.com
[ 7.379232] usb 1-1.6: new full-speed USB device number 4 using ehci-pci
[ 7.491573] usb 1-1.6: New USB device found, idVendor=04f3, idProduct=0034
[ 7.491578] usb 1-1.6: New USB device strings: Mfr=4, Product=14, SerialNumber=0
[ 7.491580] usb 1-1.6: Product: Touchscreen
[ 7.491583] usb 1-1.6: Manufacturer: ELAN
[ 7.569390] usb 1-1.7: new high-speed USB device number 5 using ehci-pci
[ 7.680223] usb 1-1.7: New USB device found, idVendor=0bda, idProduct=0129
[ 7.680226] usb 1-1.7: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 7.680228] usb 1-1.7: Product: USB2.0-CRW
[ 7.680230] usb 1-1.7: Manufacturer: Generic
[ 7.680231] usb 1-1.7: SerialNumber: 20100201396000000
[ 7.759543] usb 1-1.8: new high-speed USB device number 6 using ehci-pci
[ 7.765237] md: raid0 personality registered for level 0
[ 7.829190] md: raid1 personality registered for level 1
[ 7.906529] async_tx: api initialized (async)
[ 7.934552] usb 1-1.8: New USB device found, idVendor=064e, idProduct=812e
[ 7.934556] usb 1-1.8: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 7.934558] usb 1-1.8: Product: Laptop_Integrated_Webcam_HD
[ 7.934560] usb 1-1.8: Manufacturer: SuYin
[ 8.079696] raid6: sse2x1 5360 MB/s
[ 8.249830] raid6: sse2x2 6880 MB/s
[ 8.419977] raid6: sse2x4 7978 MB/s
[ 8.590108] raid6: avx2x1 10568 MB/s
[ 8.760242] raid6: avx2x2 12472 MB/s
[ 8.930379] raid6: avx2x4 13953 MB/s
[ 8.930381] raid6: using algorithm avx2x4 (13953 MB/s)
[ 8.930382] raid6: using avx2x2 recovery algorithm
[ 8.956647] xor: automatically using best checksumming function:
[ 9.050478] avx : 15132.400 MB/sec
[ 9.059481] md: raid6 personality registered for level 6
[ 9.059482] md: raid5 personality registered for level 5
[ 9.059483] md: raid4 personality registered for level 4
[ 9.129590] md: raid10 personality registered for level 10
[ 9.197001] md: linear personality registered for level -1
[ 9.264953] md: multipath personality registered for level -4
[ 9.341978] JFS: nTxBlock = 8192, nTxLock = 65536
[ 9.425635] RPC: Registered named UNIX socket transport module.
[ 9.425638] RPC: Registered udp transport module.
[ 9.425639] RPC: Registered tcp transport module.
[ 9.425640] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 9.503755] fuse init (API version 7.22)
[ 9.574498] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI
[ 9.574499] e1000: Copyright (c) 1999-2006 Intel Corporation.
[ 9.653957] pps_core: LinuxPPS API ver. 1 registered
[ 9.653960] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 9.655429] PTP clock support registered
[ 9.736537] Loading iSCSI transport class v2.0-870.
[ 10.455972] EXT3-fs (sda4): error: couldn't mount because of unsupported optional features (240)
[ 10.456077] EXT2-fs (sda4): error: couldn't mount because of unsupported optional features (240)
[ 10.524313] EXT4-fs (sda4): mounted filesystem with ordered data mode. Opts: (null)
[ 13.239272] systemd-udevd[15587]: starting version 208
[ 13.712349] input: PC Speaker as /devices/platform/pcspkr/input/input2
[ 13.715405] ACPI: Requesting acpi_cpufreq
[ 13.744486] Monitor-Mwait will be used to enter C-1 state
[ 13.744497] Monitor-Mwait will be used to enter C-2 state
[ 13.744508] ACPI: acpi_idle registered with cpuidle
[ 13.793396] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:02/PNP0C0D:00/input/input3
[ 13.793612] ACPI: Lid Switch [LID0]
[ 13.794237] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:02/PNP0C0C:00/input/input4
[ 13.794355] ACPI: Power Button [PWRB]
[ 13.794421] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input5
[ 13.794609] ACPI: Power Button [PWRF]
[ 13.824198] rtc_cmos 00:04: RTC can wake from S4
[ 13.824353] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
[ 13.824383] rtc_cmos 00:04: alarms up to one month, 242 bytes nvram, hpet irqs
[ 13.843261] ACPI Warning: 0x0000000000004040-0x000000000000405f SystemIO conflicts with Region \_SB_.PCI0.SBUS.SMBI 1 (20130328/utaddress-251)
[ 13.843270] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 13.916413] microcode: CPU0 sig=0x40651, pf=0x40, revision=0x15
[ 14.094641] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[ 14.094648] ACPI: Battery Slot [BAT1] (battery present)
[ 14.094695] ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[ 14.094762] ACPI: AC Adapter [ACAD] (off-line)
[ 14.116101] microcode: CPU1 sig=0x40651, pf=0x40, revision=0x15
[ 14.117729] microcode: CPU2 sig=0x40651, pf=0x40, revision=0x15
[ 14.118112] microcode: CPU3 sig=0x40651, pf=0x40, revision=0x15
[ 14.118520] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 14.266169] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
[ 14.351441] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 14.351671] r8169 0000:01:00.0: irq 60 for MSI/MSI-X
[ 14.351801] r8169 0000:01:00.0 eth0: RTL8106e at 0xffffc900117fa000, 74:86:7a:30:db:4d, XID 04900000 IRQ 60
[ 14.395612] snd_hda_intel 0000:00:03.0: irq 61 for MSI/MSI-X
[ 14.454968] systemd-udevd[15604]: renamed network interface eth0 to enp1s0
[ 14.467749] hda_codec: invalid CONNECT_LIST verb 5[1]:0
[ 14.467806] hda_codec: invalid CONNECT_LIST verb 6[1]:0
[ 14.467870] hda_codec: invalid CONNECT_LIST verb 7[1]:0
[ 14.468439] snd_hda_intel 0000:00:1b.0: irq 62 for MSI/MSI-X
[ 15.926667] EXT4-fs (sda4): re-mounted. Opts: (null)
[ 16.188648] Adding 16383996k swap on /dev/sda3. Priority:-1 extents:1 across:16383996k
[ 20.047389] r8169 0000:01:00.0 enp1s0: unable to load firmware patch rtl_nic/rtl8106e-1.fw (-2)
[ 20.170654] r8169 0000:01:00.0 enp1s0: link down
[ 20.170672] r8169 0000:01:00.0 enp1s0: link down
[ 21.918082] r8169 0000:01:00.0 enp1s0: link up
|
My lspci:
| Code: |
00:00.0 Host bridge: Intel Corporation Haswell-ULT DRAM Controller (rev 09)
Subsystem: Dell Device 05e9
Flags: bus master, fast devsel, latency 0
Capabilities: [e0] Vendor Specific Information: Len=0c <?>
00:02.0 VGA compatible controller: Intel Corporation Haswell-ULT Integrated Graphics Controller (rev 09) (prog-if 00 [VGA controller])
Subsystem: Dell Device 05e9
Flags: bus master, fast devsel, latency 0, IRQ 7
Memory at b0000000 (64-bit, non-prefetchable) [size=4M]
Memory at a0000000 (64-bit, prefetchable) [size=256M]
I/O ports at 4000 [size=64]
Expansion ROM at <unassigned> [disabled]
Capabilities: [90] MSI: Enable- Count=1/1 Maskable- 64bit-
Capabilities: [d0] Power Management version 2
Capabilities: [a4] PCI Advanced Features
00:03.0 Audio device: Intel Corporation Device 0a0c (rev 09)
Subsystem: Dell Device 05e9
Flags: bus master, fast devsel, latency 0, IRQ 61
Memory at b0710000 (64-bit, non-prefetchable) [size=16K]
Capabilities: [50] Power Management version 2
Capabilities: [60] MSI: Enable+ Count=1/1 Maskable- 64bit-
Capabilities: [70] Express Root Complex Integrated Endpoint, MSI 00
Kernel driver in use: snd_hda_intel
Kernel modules: snd_hda_intel
00:14.0 USB controller: Intel Corporation Lynx Point-LP USB xHCI HC (rev 04) (prog-if 30 [XHCI])
Subsystem: Dell Device 05e9
Flags: bus master, medium devsel, latency 0, IRQ 59
Memory at b0700000 (64-bit, non-prefetchable) [size=64K]
Capabilities: [70] Power Management version 2
Capabilities: [80] MSI: Enable+ Count=1/8 Maskable- 64bit+
Kernel driver in use: xhci_hcd
Kernel modules: xhci_hcd
00:16.0 Communication controller: Intel Corporation Lynx Point-LP HECI #0 (rev 04)
Subsystem: Dell Device 05e9
Flags: bus master, fast devsel, latency 0, IRQ 7
Memory at b0718000 (64-bit, non-prefetchable) [size=32]
Capabilities: [50] Power Management version 3
Capabilities: [8c] MSI: Enable- Count=1/1 Maskable- 64bit+
00:1b.0 Audio device: Intel Corporation Lynx Point-LP HD Audio Controller (rev 04)
Subsystem: Dell Device 05e9
Flags: bus master, fast devsel, latency 0, IRQ 62
Memory at b0714000 (64-bit, non-prefetchable) [size=16K]
Capabilities: [50] Power Management version 3
Capabilities: [60] MSI: Enable+ Count=1/1 Maskable- 64bit+
Capabilities: [70] Express Root Complex Integrated Endpoint, MSI 00
Capabilities: [100] Virtual Channel
Kernel driver in use: snd_hda_intel
Kernel modules: snd_hda_intel
00:1c.0 PCI bridge: Intel Corporation Lynx Point-LP PCI Express Root Port 3 (rev e4) (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 00003000-00003fff
Memory behind bridge: b0600000-b06fffff
Prefetchable memory behind bridge: 00000000b0400000-00000000b04fffff
Capabilities: [40] Express Root Port (Slot+), MSI 00
Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit-
Capabilities: [90] Subsystem: Dell Device 05e9
Capabilities: [a0] Power Management version 3
Capabilities: [100] #00
Capabilities: [200] #1e
Kernel driver in use: pcieport
00:1c.3 PCI bridge: Intel Corporation Lynx Point-LP PCI Express Root Port 4 (rev e4) (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
Memory behind bridge: b0500000-b05fffff
Prefetchable memory behind bridge: 000000009fb00000-000000009fbfffff
Capabilities: [40] Express Root Port (Slot+), MSI 00
Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit-
Capabilities: [90] Subsystem: Dell Device 05e9
Capabilities: [a0] Power Management version 3
Capabilities: [100] #00
Capabilities: [200] #1e
Kernel driver in use: pcieport
00:1d.0 USB controller: Intel Corporation Lynx Point-LP USB EHCI #1 (rev 04) (prog-if 20 [EHCI])
Subsystem: Dell Device 05e9
Flags: bus master, medium devsel, latency 0, IRQ 23
Memory at b071c000 (32-bit, non-prefetchable) [size=1K]
Capabilities: [50] Power Management version 3
Capabilities: [58] Debug port: BAR=1 offset=00a0
Capabilities: [98] PCI Advanced Features
Kernel driver in use: ehci-pci
Kernel modules: ehci_pci
00:1f.0 ISA bridge: Intel Corporation Lynx Point-LP LPC Controller (rev 04)
Subsystem: Dell Device 05e9
Flags: bus master, medium devsel, latency 0
Capabilities: [e0] Vendor Specific Information: Len=0c <?>
00:1f.2 SATA controller: Intel Corporation Lynx Point-LP SATA Controller 1 [AHCI mode] (rev 04) (prog-if 01 [AHCI 1.0])
Subsystem: Dell Device 05e9
Flags: bus master, 66MHz, medium devsel, latency 0, IRQ 58
I/O ports at 4088 [size=8]
I/O ports at 4094 [size=4]
I/O ports at 4080 [size=8]
I/O ports at 4090 [size=4]
I/O ports at 4060 [size=32]
Memory at b071b000 (32-bit, non-prefetchable) [size=2K]
Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit-
Capabilities: [70] Power Management version 3
Capabilities: [a8] SATA HBA v1.0
Kernel driver in use: ahci
Kernel modules: ahci
00:1f.3 SMBus: Intel Corporation Lynx Point-LP SMBus Controller (rev 04)
Subsystem: Dell Device 05e9
Flags: medium devsel, IRQ 18
Memory at b0719000 (64-bit, non-prefetchable) [size=256]
I/O ports at 4040 [size=32]
Kernel modules: i2c_i801
01:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8101E/RTL8102E PCI Express Fast Ethernet controller (rev 07)
Subsystem: Dell Device 05e9
Flags: bus master, fast devsel, latency 0, IRQ 60
I/O ports at 3000 [size=256]
Memory at b0600000 (64-bit, non-prefetchable) [size=4K]
Memory at b0400000 (64-bit, prefetchable) [size=16K]
Capabilities: [40] Power Management version 3
Capabilities: [50] MSI: Enable+ Count=1/1 Maskable- 64bit+
Capabilities: [70] Express Endpoint, MSI 01
Capabilities: [b0] MSI-X: Enable- Count=4 Masked-
Capabilities: [d0] Vital Product Data
Capabilities: [100] Advanced Error Reporting
Capabilities: [140] Virtual Channel
Capabilities: [160] Device Serial Number 01-00-00-00-36-4c-e0-00
Capabilities: [170] Latency Tolerance Reporting
Kernel driver in use: r8169
Kernel modules: r8169
02:00.0 Network controller: Qualcomm Atheros QCA9565 / AR9565 Wireless Network Adapter (rev 01)
Subsystem: Dell Device 020c
Flags: bus master, fast devsel, latency 0, IRQ 10
Memory at b0500000 (64-bit, non-prefetchable) [size=512K]
Expansion ROM at 9fb00000 [disabled] [size=64K]
Capabilities: [40] Power Management version 2
Capabilities: [50] MSI: Enable- Count=1/4 Maskable+ 64bit+
Capabilities: [70] Express Endpoint, MSI 00
Capabilities: [100] Advanced Error Reporting
Capabilities: [140] Virtual Channel
Capabilities: [160] Device Serial Number 00-00-00-00-00-00-00-00
|
And my emerge --info
| Code: |
Portage 2.2.7 (default/linux/amd64/13.0/desktop/kde, gcc-4.7.3, glibc-2.17, 3.10.25-gentoo x86_64)
=================================================================
System uname: Linux-3.10.25-gentoo-x86_64-Intel-R-_Core-TM-_i7-4500U_CPU_@_1.80GHz-with-gentoo-2.2
KiB Mem: 7904920 total, 7732140 free
KiB Swap: 16383996 total, 16383996 free
Timestamp of tree: Mon, 27 Jan 2014 16:45:01 +0000
ld GNU ld (GNU Binutils) 2.23.2
app-shells/bash: 4.2_p45
dev-lang/python: 2.7.5-r3, 3.3.2-r2
dev-util/cmake: 2.8.11.2
dev-util/pkgconfig: 0.28
sys-apps/baselayout: 2.2
sys-apps/openrc: 0.12.4
sys-apps/sandbox: 2.6-r1
sys-devel/autoconf: 2.13, 2.69
sys-devel/automake: 1.12.6, 1.13.4
sys-devel/binutils: 2.23.2
sys-devel/gcc: 4.7.3-r1
sys-devel/gcc-config: 1.7.3
sys-devel/libtool: 2.4.2
sys-devel/make: 3.82-r4
sys-kernel/linux-headers: 3.9 (virtual/os-headers)
sys-libs/glibc: 2.17
Repositories: gentoo
ACCEPT_KEYWORDS="amd64"
ACCEPT_LICENSE="* -@EULA"
CBUILD="x86_64-pc-linux-gnu"
CFLAGS="-O2 -pipe -mtune=native"
CHOST="x86_64-pc-linux-gnu"
CONFIG_PROTECT="/etc /usr/share/config /usr/share/gnupg/qualified.txt"
CONFIG_PROTECT_MASK="/etc/ca-certificates.conf /etc/env.d /etc/fonts/fonts.conf /etc/gconf /etc/gentoo-release /etc/sandbox.d /etc/terminfo"
CXXFLAGS="-O2 -pipe -mtune=native"
DISTDIR="/usr/portage/distfiles"
FCFLAGS="-O2 -pipe"
FEATURES="assume-digests binpkg-logs config-protect-if-modified distlocks ebuild-locks fixlafiles merge-sync news parallel-fetch preserve-libs protect-owned sandbox sfperms strict unknown-features-warn unmerge-logs unmerge-orphans userfetch userpriv usersandbox usersync"
FFLAGS="-O2 -pipe"
GENTOO_MIRRORS="http://gentoo.arcticnetwork.ca/ http://gentoo.gossamerhost.com http://mirror.the-best-hosting.net http://gentoo.mirrors.tera-byte.com/ http://mirror.csclub.uwaterloo.ca/gentoo-distfiles/"
LANG="en_US.utf8"
LDFLAGS="-Wl,-O1 -Wl,--as-needed"
MAKEOPTS="-j3"
PKGDIR="/usr/portage/packages"
PORTAGE_CONFIGROOT="/"
PORTAGE_RSYNC_OPTS="--recursive --links --safe-links --perms --times --omit-dir-times --compress --force --whole-file --delete --stats --human-readable --timeout=180 --exclude=/distfiles --exclude=/local --exclude=/packages"
PORTAGE_TMPDIR="/var/tmp"
PORTDIR="/usr/portage"
PORTDIR_OVERLAY=""
SYNC="rsync://rsync4.ca.gentoo.org/gentoo-portage"
USE="X a52 aac acl acpi alsa amd64 berkdb bindist bluetooth branding bzip2 cairo cdda cdinstall cdr cli consolekit cracklib crypt css ctype cups cxx dbus declarative dri dts dvd dvdr emboss encode exif fam firefox flac fortran gdbm gif gpm iconv ipv6 javascript jpeg kde kipi lcms ldap libnotify lzma mad mmx mng modules mozilla mp3 mp4 mpeg multilib ncurses nls nptl ogg opengl openmp pam pango pcre pdf phonon plasma png policykit ppds qt3support qt4 readline sasl sdl semantic-desktop session shared-glapi smp sna spell sse sse2 ssl startup-notification svg tcpd tiff truetype udev udisks unicode upower usb vorbis wxwidgets x264 xcb xcomposite xinerama xml xscreensaver xv xvid zlib" ABI_X86="64" ALSA_CARDS="ali5451 als4000 atiixp atiixp-modem bt87x ca0106 cmipci emu10k1x ens1370 ens1371 es1938 es1968 fm801 hda-intel intel8x0 intel8x0m maestro3 trident usb-audio via82xx via82xx-modem ymfpci" APACHE2_MODULES="authn_core authz_core socache_shmcb unixd actions alias auth_basic authn_alias authn_anon authn_dbm authn_default authn_file authz_dbm authz_default authz_groupfile authz_host authz_owner authz_user autoindex cache cgi cgid dav dav_fs dav_lock deflate dir disk_cache env expires ext_filter file_cache filter headers include info log_config logio mem_cache mime mime_magic negotiation rewrite setenvif speling status unique_id userdir usertrack vhost_alias" CALLIGRA_FEATURES="kexi words flow plan sheets stage tables krita karbon braindump author" CAMERAS="ptp2" COLLECTD_PLUGINS="df interface irq load memory rrdtool swap syslog" ELIBC="glibc" GPSD_PROTOCOLS="ashtech aivdm earthmate evermore fv18 garmin garmintxt gpsclock itrax mtk3301 nmea ntrip navcom oceanserver oldstyle oncore rtcm104v2 rtcm104v3 sirf superstar2 timing tsip tripmate tnt ublox ubx" INPUT_DEVICES="evdev synaptics" KERNEL="linux" LCD_DEVICES="bayrad cfontz cfontz633 glk hd44780 lb216 lcdm001 mtxorb ncurses text" LIBREOFFICE_EXTENSIONS="presenter-console presenter-minimizer" OFFICE_IMPLEMENTATION="libreoffice" PHP_TARGETS="php5-5" PYTHON_SINGLE_TARGET="python2_7" PYTHON_TARGETS="python2_7 python3_3" RUBY_TARGETS="ruby19 ruby18" USERLAND="GNU" VIDEO_CARDS="intel i965" XTABLES_ADDONS="quota2 psd pknock lscan length2 ipv4options ipset ipp2p iface geoip fuzzy condition tee tarpit sysrq steal rawnat logmark ipmark dhcpmac delude chaos account"
Unset: CPPFLAGS, CTARGET, EMERGE_DEFAULT_OPTS, INSTALL_MASK, LC_ALL, PORTAGE_BUNZIP2_COMMAND, PORTAGE_COMPRESS, PORTAGE_COMPRESS_FLAGS, PORTAGE_RSYNC_EXTRA_OPTS, USE_PYTHON
|
How do I fix this problem? |
|
| Back to top |
|
 |
NeddySeagoon
Administrator
Joined: 05 Jul 2003
Posts: 54237
Location: 56N 3W
|
| Posted: Fri Jan 31, 2014 10:08 pm Post subject: |
|
|
agszepp,
Welcome to Gentoo
| Code: | | [ 927.336] (EE) No devices detected. |
usually means some other driver has grabbed your graphics chip, before the Xorg driver got to it. Its usually caused by a hardware framebuffer option in the kernel being on when it needs to be off.
Make friends with wgetpaste and put your kernet .config file onto a pastebin site.
Tell us the link you get back
_________________
Regards,
NeddySeagoon
Computer users fall into two groups:-
those that do backups
those that have never had a hard drive fail. |
|
| Back to top |
|
|
agszepp
n00b
Joined: 30 Jan 2014
Posts: 8
|
|
| Back to top |
|
|
NeddySeagoon
Administrator
Joined: 05 Jul 2003
Posts: 54237
Location: 56N 3W
|
| Posted: Fri Jan 31, 2014 11:31 pm Post subject: |
|
|
agszepp,
genkernel, unaided cannot build you a suitable kernel.
The problem is that some kernel settings conflict with other kernel settings.
You must use genkernel with the -menuconfig option, so you can help it out.
Pay attention to the Configuring framebuffers & the Intel Section
Your kernel setup is not correct.
Rebuild your kernel following the Wiki.
Hint: The kernel has several thousand configuration options arranged in a tree. You can search for options by pressing /
The options | Code: | CONFIG_FB_VESA=y
CONFIG_FB_EFI=y |
must be off. So practice on them. They are not the complete answer, there are other options which must be on.
_________________
Regards,
NeddySeagoon
Computer users fall into two groups:-
those that do backups
those that have never had a hard drive fail. |
|
| Back to top |
|
|
agszepp
n00b
Joined: 30 Jan 2014
Posts: 8
|
| Posted: Fri Jan 31, 2014 11:40 pm Post subject: |
|
|
| Quote: |
Hint: The kernel has several thousand configuration options arranged in a tree. You can search for options by pressing /
The options
| Code: |
CONFIG_FB_VESA=y
CONFIG_FB_EFI=y
|
must be off.
|
What do you mean by that? I searched for those options on my pastebin and they were set to
| Code: |
CONFIG_FB_VESA=y
CONFIG_FB_EFI=y
|
|
|
| Back to top |
|
|
NeddySeagoon
Administrator
Joined: 05 Jul 2003
Posts: 54237
Location: 56N 3W
|
| Posted: Fri Jan 31, 2014 11:57 pm Post subject: |
|
|
agszepp,
Thats a part of your problem.
means the option is on, built into the kernel.
means that the option is a loadable module.
| Code: | | # CONFIG_FB_VESA is not set |
means that the option is off.
Both of the options listed in my earlier post must be off.
The Wiki says | Code: | Kernel configuration Configuring framebuffers
Device Drivers --->
Graphics support --->
Support for frame buffer devices --->
## (Disable all drivers, including VGA, Intel, nVidia, and ATI)
## (Further down, enable basic console support. KMS uses this.)
Console display driver support --->
<*> Framebuffer Console Support
|
You also need the settings under Intel settings, on the same page.
Never use a text editor to edit the kernel .config file directly. Horrible things usually happen, thats why is says | Code: | #
# Automatically generated file; DO NOT EDIT. |
at the top of the file.
_________________
Regards,
NeddySeagoon
Computer users fall into two groups:-
those that do backups
those that have never had a hard drive fail. |
|
| Back to top |
|
|
VoidMage
Watchman
Joined: 14 Oct 2006
Posts: 6196
|
| Posted: Sat Feb 01, 2014 3:33 am Post subject: |
|
|
| Actually, CONFIG_FB_EFI=y is one of very few values that are OK. |
|
| Back to top |
|
|
agszepp
n00b
Joined: 30 Jan 2014
Posts: 8
|
| Posted: Sat Feb 01, 2014 5:05 am Post subject: |
|
|
| Thanks for all your help NeddySeagoon. I recompiled the kernel and I got KDE running, but there's no volume icon. What should I do about that? |
|
| Back to top |
|
|
NeddySeagoon
Administrator
Joined: 05 Jul 2003
Posts: 54237
Location: 56N 3W
|
| Posted: Sat Feb 01, 2014 12:00 pm Post subject: |
|
|
agszepp,
Start a new thread for a new problem. I'm not a KDE user, so can't help.
A new thread will show up in the 'Unanswered Posts' search, so you will get help sooner.
_________________
Regards,
NeddySeagoon
Computer users fall into two groups:-
those that do backups
those that have never had a hard drive fail. |
|
| Back to top |
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
|
|
Desktop Environments
