View previous topic :: View next topic |
Author |
Message |
deltamalloc Apprentice
Joined: 18 Jan 2013 Posts: 279
|
Posted: Sat Jul 20, 2013 6:19 pm Post subject: i915 not working |
|
|
When I run any OpenGL program, the following happens:
Code: |
$ glxgears
libGL error: failed to load driver: i915
libGL error: Try again with LIBGL_DEBUG=verbose for more details.
DRM_IOCTL_I915_GEM_APERTURE failed: Bad file descriptor
Assuming 131072kB available aperture size.
May lead to reduced performance or incorrect rendering.
get chip id failed: -1 [9]
param: 4, val: 100
Segmentation fault
|
Verbose:
Code: |
$ export LIBGL_DEBUG=verbose
$ glxgears
libGL: OpenDriver: trying /usr/lib/dri/tls/i915_dri.so
libGL: OpenDriver: trying /usr/lib/dri/i915_dri.so
libGL error: failed to create dri screen
libGL error: failed to load driver: i915
libGL: OpenDriver: trying /usr/lib/dri/tls/swrast_dri.so
libGL: OpenDriver: trying /usr/lib/dri/swrast_dri.so
DRM_IOCTL_I915_GEM_APERTURE failed: Bad file descriptor
Assuming 131072kB available aperture size.
May lead to reduced performance or incorrect rendering.
get chip id failed: -1 [9]
param: 4, val: 100
Segmentation fault
|
lspci:
Code: |
00:02.0 VGA compatible controller: Intel Corporation 82852/855GM Integrated Graphics Device (rev 02)
|
kernel config:
Code: |
│ │ <M> /dev/agpgart (AGP Support) ---> │ │
│ │ -*- VGA Arbitration │ │
│ │ (16) Maximum number of GPUs │ │
│ │ [ ] Laptop Hybrid Graphics - GPU switching support │ │
│ │ <M> Direct Rendering Manager (XFree86 4.1.0 and higher DRI suppor│ │
│ │ < > 3dfx Banshee/Voodoo3+ │ │
│ │ < > ATI Rage 128 │ │
│ │ < > ATI Radeon │ │
│ │ < > Nouveau (nVidia) cards │ │
│ │ I2C encoder or helper chips ---> │ │
│ │ <M> Intel 8xx/9xx/G3x/G4x/HD Graphics │ │
│ │ [*] Enable modesetting on intel by default │ │
│ │ < > Matrox g200/g400 │ │
│ │ < > SiS video cards │ │
│ │ < > Via unichrome video cards │ │
│ │ < > Savage video cards │ │
│ │ < > DRM driver for VMware Virtual GPU │ │
│ │ < > Intel GMA5/600 KMS Framebuffer │ │
│ │ < > DisplayLink │ │
│ │ < > AST server chips │ │
│ │ < > Kernel modesetting driver for MGA G200 server engines │ │
│ │ < > Cirrus driver for QEMU emulated device │ │
│ │ <M> Intel GMA500 Stub Driver │ │
│ │ {*} Lowlevel video output switch controls │ │
│ │ {*} Support for frame buffer devices ---> │ │
│ │ [ ] Exynos Video driver support ---> │ │
│ │ -*- Backlight & LCD device support ---> │ │
│ │ Console display driver support ---> │ │
│ │ [ ] Bootup logo --->
|
Why doesn't this work? Any ideas? There is nothing in dmesg except for the segfault of the program that crashed. In Xorg.log there is only a warning:
Code: |
[ 17.700] (II) LoadModule: "dri2"
[ 17.700] (II) Module "dri2" already built-in
[ 17.700] (==) Depth 24 pixmap format is 32 bpp
[ 17.758] (II) intel(0): SNA initialized with gen2 backend
[ 17.758] (==) intel(0): Backing store disabled
[ 17.758] (==) intel(0): Silken mouse enabled
[ 17.758] (II) intel(0): HW Cursor enabled
[ 17.758] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 17.773] (==) intel(0): DPMS enabled
[ 17.773] (WW) intel(0): Textured video not supported on this hardware
[ 17.796] (II) intel(0): [DRI2] Setup complete
[ 17.796] (II) intel(0): [DRI2] DRI driver: i915
[ 17.796] (II) intel(0): direct rendering: DRI2 Enabled
[ 17.796] (==) intel(0): hotplug detection: "enabled"
|
Any ideas? |
|
Back to top |
|
|
DONAHUE Watchman
Joined: 09 Dec 2006 Posts: 7651 Location: Goose Creek SC
|
Posted: Sat Jul 20, 2013 6:32 pm Post subject: |
|
|
shouldn't matter but <M> Intel GMA500 Stub Driver --> might cause interference, should not need it
{*} Support for frame buffer devices ---> what is selecting this? What choices are selected under it?
Console display driver support ---> is <*> Framebuffer Console support selected under this
<M> /dev/agpgart (AGP Support) ---> why not <*> ?
<M> Direct Rendering Manager (XFree86 4.1.0 and higher DRI support --> why not <*> ? _________________ Defund the FCC. |
|
Back to top |
|
|
aeyeaws64 n00b
Joined: 20 Jul 2013 Posts: 8
|
Posted: Sat Jul 20, 2013 9:22 pm Post subject: |
|
|
You cant make agp or dri modules.
Under Support for frame buffer devices
* Enable Video Mode Handling Helpers
* Enable Tile Blitting Support
thats it , no vesa, uvesa, intel, or vga |
|
Back to top |
|
|
deltamalloc Apprentice
Joined: 18 Jan 2013 Posts: 279
|
Posted: Sun Jul 21, 2013 5:26 am Post subject: |
|
|
DONAHUE wrote: | shouldn't matter but <M> Intel GMA500 Stub Driver --> might cause interference, should not need it
{*} Support for frame buffer devices ---> what is selecting this? What choices are selected under it?
Console display driver support ---> is <*> Framebuffer Console support selected under this
<M> /dev/agpgart (AGP Support) ---> why not <*> ?
<M> Direct Rendering Manager (XFree86 4.1.0 and higher DRI support --> why not <*> ? |
I have tried with and without GMA500, it was just a desperate attempt I did before posting here.
I do not know what is selecting "Support for frame buffer devices", I have to select either compiled-in or module. Under this option I had nothing selected previously, but now I have also tried with (as suggested in this thread) Enable Video Mode Handling Helpers and Enable Tile Blitting Support.
AGP support as module, why not? Sometimes I'd like to just stay in the console. But I have tried compiled-in too.
DRI support, again the same, I don't always want to use X.
I have tried various variants now. By "best bet" is the one I'm currently using, and it is:
Code: |
│ │ <*> /dev/agpgart (AGP Support) ---> │ │
│ │ -*- VGA Arbitration │ │
│ │ (16) Maximum number of GPUs │ │
│ │ [ ] Laptop Hybrid Graphics - GPU switching support │ │
│ │ <*> Direct Rendering Manager (XFree86 4.1.0 and higher DRI support) ---> │ │
│ │ I2C encoder or helper chips ---> │ │
│ │ < > 3dfx Banshee/Voodoo3+ │ │
│ │ < > ATI Rage 128 │ │
│ │ < > ATI Radeon │ │
│ │ < > Nouveau (nVidia) cards │ │
│ │ <*> Intel 8xx/9xx/G3x/G4x/HD Graphics │ │
│ │ [*] Enable modesetting on intel by default │ │
│ │ < > Matrox g200/g400 │ │
│ │ < > SiS video cards │ │
│ │ < > Via unichrome video cards │ │
│ │ < > Savage video cards │ │
│ │ < > DRM driver for VMware Virtual GPU │ │
│ │ < > Intel GMA5/600 KMS Framebuffer │ │
│ │ < > DisplayLink │ │
│ │ < > AST server chips │ │
│ │ < > Kernel modesetting driver for MGA G200 server engines │ │
│ │ < > Cirrus driver for QEMU emulated device │ │
│ │ < > QXL virtual GPU │ │
│ │ -*- Lowlevel video output switch controls │ │
│ │ -*- Support for frame buffer devices ---> │ │
│ │ [ ] Exynos Video driver support ---> │ │
│ │ -*- Backlight & LCD device support ---> │ │
│ │ Console display driver support ---> │ │
│ │ [ ] Bootup logo ---> │ │
│ │ │ │
│ │
|
I have tried both kernel versions 3.8.13 and 3.10.1 now. |
|
Back to top |
|
|
deltamalloc Apprentice
Joined: 18 Jan 2013 Posts: 279
|
Posted: Sun Jul 21, 2013 5:27 am Post subject: |
|
|
aeyeaws64 wrote: | You cant make agp or dri modules.
Under Support for frame buffer devices
* Enable Video Mode Handling Helpers
* Enable Tile Blitting Support
thats it , no vesa, uvesa, intel, or vga |
I have followed your advices now, but sadly I still get the same error. |
|
Back to top |
|
|
DONAHUE Watchman
Joined: 09 Dec 2006 Posts: 7651 Location: Goose Creek SC
|
Posted: Sun Jul 21, 2013 6:15 am Post subject: |
|
|
suggest: Quote: | Graphics support --->
<*> /dev/agpgart (AGP Support) --->
--- /dev/agpgart (AGP Support)
< > AMD Opteron/Athlon64 on-CPU GART support
<*> Intel 440LX/BX/GX, I8xx and E7x05 chipset support
< > SiS chipset support
< > VIA chipset support
-*- VGA Arbitration
(2) Maximum number of GPUs
[ ] Laptop Hybrid Graphics - GPU switching support
<*> Direct Rendering Manager (XFree86 4.1.0 and higher DRI support) --->
I2C encoder or helper chips --->
< > 3dfx Banshee/Voodoo3+ (NEW)
< > ATI Rage 128 (NEW)
< > ATI Radeon (NEW)
< > Nouveau (nVidia) cards (NEW)
<*> Intel 8xx/9xx/G3x/G4x/HD Graphics
[*] Enable modesetting on intel by default
< > Matrox g200/g400 (NEW)
< > SiS video cards (NEW)
< > Via unichrome video cards (NEW)
< > Savage video cards (NEW)
< > DRM driver for VMware Virtual GPU (NEW)
< > Intel GMA5/600 KMS Framebuffer (NEW)
< > DisplayLink (NEW)
< > AST server chips (NEW)
< > Kernel modesetting driver for MGA G200 server engines (NEW)
< > Cirrus driver for QEMU emulated device (NEW)
< > QXL virtual GPU (NEW)
-*- Lowlevel video output switch controls
-*- Support for frame buffer devices --->
--- Support for frame buffer devices
[*] Enable firmware EDID
[ ] Framebuffer foreign endianness support --->
[*] Enable Video Mode Handling Helpers
[*] Enable Tile Blitting Support
*** Frame buffer hardware drivers ***
< > Cirrus Logic support
< > Permedia2 support
< > CyberPro 2000/2010/5000 support
< > Arc Monochrome LCD board support
[ ] Asiliant (Chips) 69000 display support
[ ] IMS Twin Turbo display support
< > VGA 16-color graphics support
< > Userspace VESA VGA graphics support
[ ] VESA VGA graphics support
[ ] EFI-based Framebuffer Support
< > N411 Apollo/Hecuba devkit support
< > Hercules mono graphics support
< > Epson S1D13XXX framebuffer support
< > nVidia Framebuffer Support
< > nVidia Riva support
< > Intel740 support
< > Intel LE80578 (Vermilion) support
< > Matrox acceleration
< > ATI Radeon display support
< > ATI Rage128 display support
< > ATI Mach64 display support
< > S3 Trio/Virge support
< > S3 Savage support
< > SiS/XGI display support
< > VIA UniChrome (Pro) and Chrome9 display support
< > NeoMagic display support
< > IMG Kyro support
< > 3Dfx Banshee/Voodoo3/Voodoo5 display support
< > 3Dfx Voodoo Graphics (sst1) support
< > VIA VT8623 support
< > Trident/CyberXXX/CyberBlade support
< > ARK 2000PV support
< > Permedia3 support
< > Fujitsu carmine frame buffer support
[ ] AMD Geode family framebuffer support
< > SMSC UFX6000/7000 USB Framebuffer support
< > Displaylink USB Framebuffer support
< > Goldfish Framebuffer
< > Virtual Frame Buffer support (ONLY FOR TESTING!)
< > E-Ink Metronome/8track controller support
< > Fujitsu MB862xx GDC support
< > E-Ink Broadsheet/Epson S1D13521 controller support
< > AUO-K190X EPD controller support
[ ] Exynos Video driver support --->
[*] Backlight & LCD device support --->
Console display driver support --->
-*- VGA text console
[*] Enable Scrollback Buffer in System RAM
(256) Scrollback Buffer Size (in KB)
-*- Framebuffer Console support
-*- Map the console to the primary display device
[ ] Framebuffer Console Rotation
[ ] Select compiled-in fonts
[*] Bootup logo --->
--- Bootup logo
[ ] Standard black and white Linux logo
[ ] Standard 16-color Linux logo
[*] Standard 224-color Linux logo | recompile recopy kernel 3.10.1 then run emerge -a xorg-server $(qlist -IC x11-drivers) check that xf86-video-intel xf86-input-evdev xf86-input-synaptics are included _________________ Defund the FCC. |
|
Back to top |
|
|
deltamalloc Apprentice
Joined: 18 Jan 2013 Posts: 279
|
Posted: Mon Jul 22, 2013 12:36 am Post subject: |
|
|
DONAHUE wrote: | suggest: Quote: | Graphics support --->
<*> /dev/agpgart (AGP Support) --->
--- /dev/agpgart (AGP Support)
< > AMD Opteron/Athlon64 on-CPU GART support
<*> Intel 440LX/BX/GX, I8xx and E7x05 chipset support
< > SiS chipset support
< > VIA chipset support
-*- VGA Arbitration
(2) Maximum number of GPUs
[ ] Laptop Hybrid Graphics - GPU switching support
<*> Direct Rendering Manager (XFree86 4.1.0 and higher DRI support) --->
I2C encoder or helper chips --->
< > 3dfx Banshee/Voodoo3+ (NEW)
< > ATI Rage 128 (NEW)
< > ATI Radeon (NEW)
< > Nouveau (nVidia) cards (NEW)
<*> Intel 8xx/9xx/G3x/G4x/HD Graphics
[*] Enable modesetting on intel by default
< > Matrox g200/g400 (NEW)
< > SiS video cards (NEW)
< > Via unichrome video cards (NEW)
< > Savage video cards (NEW)
< > DRM driver for VMware Virtual GPU (NEW)
< > Intel GMA5/600 KMS Framebuffer (NEW)
< > DisplayLink (NEW)
< > AST server chips (NEW)
< > Kernel modesetting driver for MGA G200 server engines (NEW)
< > Cirrus driver for QEMU emulated device (NEW)
< > QXL virtual GPU (NEW)
-*- Lowlevel video output switch controls
-*- Support for frame buffer devices --->
--- Support for frame buffer devices
[*] Enable firmware EDID
[ ] Framebuffer foreign endianness support --->
[*] Enable Video Mode Handling Helpers
[*] Enable Tile Blitting Support
*** Frame buffer hardware drivers ***
< > Cirrus Logic support
< > Permedia2 support
< > CyberPro 2000/2010/5000 support
< > Arc Monochrome LCD board support
[ ] Asiliant (Chips) 69000 display support
[ ] IMS Twin Turbo display support
< > VGA 16-color graphics support
< > Userspace VESA VGA graphics support
[ ] VESA VGA graphics support
[ ] EFI-based Framebuffer Support
< > N411 Apollo/Hecuba devkit support
< > Hercules mono graphics support
< > Epson S1D13XXX framebuffer support
< > nVidia Framebuffer Support
< > nVidia Riva support
< > Intel740 support
< > Intel LE80578 (Vermilion) support
< > Matrox acceleration
< > ATI Radeon display support
< > ATI Rage128 display support
< > ATI Mach64 display support
< > S3 Trio/Virge support
< > S3 Savage support
< > SiS/XGI display support
< > VIA UniChrome (Pro) and Chrome9 display support
< > NeoMagic display support
< > IMG Kyro support
< > 3Dfx Banshee/Voodoo3/Voodoo5 display support
< > 3Dfx Voodoo Graphics (sst1) support
< > VIA VT8623 support
< > Trident/CyberXXX/CyberBlade support
< > ARK 2000PV support
< > Permedia3 support
< > Fujitsu carmine frame buffer support
[ ] AMD Geode family framebuffer support
< > SMSC UFX6000/7000 USB Framebuffer support
< > Displaylink USB Framebuffer support
< > Goldfish Framebuffer
< > Virtual Frame Buffer support (ONLY FOR TESTING!)
< > E-Ink Metronome/8track controller support
< > Fujitsu MB862xx GDC support
< > E-Ink Broadsheet/Epson S1D13521 controller support
< > AUO-K190X EPD controller support
[ ] Exynos Video driver support --->
[*] Backlight & LCD device support --->
Console display driver support --->
-*- VGA text console
[*] Enable Scrollback Buffer in System RAM
(256) Scrollback Buffer Size (in KB)
-*- Framebuffer Console support
-*- Map the console to the primary display device
[ ] Framebuffer Console Rotation
[ ] Select compiled-in fonts
[*] Bootup logo --->
--- Bootup logo
[ ] Standard black and white Linux logo
[ ] Standard 16-color Linux logo
[*] Standard 224-color Linux logo | recompile recopy kernel 3.10.1 then run emerge -a xorg-server $(qlist -IC x11-drivers) check that xf86-video-intel xf86-input-evdev xf86-input-synaptics are included |
Thanks for the suggestion. I have now tried this.
Configured kernel as suggested.
Recompiled, copied new kernel and modules_install, executed lilo.
Executed emerge -a xorg-server $(qlist -IC x11-drivers), checked that xf86-video-intel xf86-input-evdev xf86-input-synaptics are indeed included.
Rebooted.
Code: |
$ glxgears
libGL error: failed to load driver: i915
libGL error: Try again with LIBGL_DEBUG=verbose for more details.
DRM_IOCTL_I915_GEM_APERTURE failed: Bad file descriptor
Assuming 131072kB available aperture size.
May lead to reduced performance or incorrect rendering.
get chip id failed: -1 [9]
param: 4, val: 100
Segmentation fault
|
Again, same thing with other programs that use OpenGL, like neverball, openarena. |
|
Back to top |
|
|
DONAHUE Watchman
Joined: 09 Dec 2006 Posts: 7651 Location: Goose Creek SC
|
Posted: Mon Jul 22, 2013 12:47 am Post subject: |
|
|
eselect opengl list shows ? _________________ Defund the FCC. |
|
Back to top |
|
|
cach0rr0 Bodhisattva
Joined: 13 Nov 2008 Posts: 4123 Location: Houston, Republic of Texas
|
Posted: Mon Jul 22, 2013 3:31 am Post subject: |
|
|
is your regular user a member of the 'video' group?
Code: |
meat@vunnable ~ $ ls -alh /dev/dri/card0
crw-rw---- 1 root video 226, 0 Jun 11 22:41 /dev/dri/card0
meat@vunnable ~ $ groups
wheel audio cdrom video games kvm users meat
|
shot in the dark *shrug* _________________ Lost configuring your system?
dump lspci -n here | see Pappy's guide | Link Stash |
|
Back to top |
|
|
deltamalloc Apprentice
Joined: 18 Jan 2013 Posts: 279
|
Posted: Mon Jul 22, 2013 7:30 am Post subject: |
|
|
DONAHUE wrote: | eselect opengl list shows ? |
Code: |
$ eselect opengl list
Available OpenGL implementations:
[1] xorg-x11 *
|
|
|
Back to top |
|
|
deltamalloc Apprentice
Joined: 18 Jan 2013 Posts: 279
|
Posted: Mon Jul 22, 2013 7:31 am Post subject: |
|
|
cach0rr0 wrote: | is your regular user a member of the 'video' group?
Code: |
meat@vunnable ~ $ ls -alh /dev/dri/card0
crw-rw---- 1 root video 226, 0 Jun 11 22:41 /dev/dri/card0
meat@vunnable ~ $ groups
wheel audio cdrom video games kvm users meat
|
shot in the dark *shrug* |
Thanks for the suggestion, but yeah, I have the video group. |
|
Back to top |
|
|
albright Advocate
Joined: 16 Nov 2003 Posts: 2588 Location: Near Toronto
|
Posted: Mon Jul 22, 2013 11:25 am Post subject: |
|
|
curious what
eselect mesa list
shows ... _________________ .... there is nothing - absolutely nothing - half so much worth
doing as simply messing about with Linux ...
(apologies to Kenneth Graeme) |
|
Back to top |
|
|
deltamalloc Apprentice
Joined: 18 Jan 2013 Posts: 279
|
Posted: Mon Jul 22, 2013 4:08 pm Post subject: |
|
|
albright wrote: | curious what
eselect mesa list
shows ... |
Code: |
$ eselect mesa list
i915 (Intel 915, 945)
[1] classic
[2] gallium *
i965 (Intel 965, G/Q3x, G/Q4x)
[1] classic *
r300 (Radeon R300-R500)
r600 (Radeon R600-R700, Evergreen, Northern Islands)
sw (Software renderer)
[1] classic
[2] gallium *
|
|
|
Back to top |
|
|
albright Advocate
Joined: 16 Nov 2003 Posts: 2588 Location: Near Toronto
|
Posted: Mon Jul 22, 2013 4:42 pm Post subject: |
|
|
I seem to recall that my intel video required all
modules (agp, i915)
what versions of mesa, intel video driver, etc do
you have installed? _________________ .... there is nothing - absolutely nothing - half so much worth
doing as simply messing about with Linux ...
(apologies to Kenneth Graeme) |
|
Back to top |
|
|
NeddySeagoon Administrator
Joined: 05 Jul 2003 Posts: 54450 Location: 56N 3W
|
Posted: Mon Jul 22, 2013 6:19 pm Post subject: |
|
|
deltamalloc,
Please post the output of
When did you last compile your kernel ? _________________ Regards,
NeddySeagoon
Computer users fall into two groups:-
those that do backups
those that have never had a hard drive fail. |
|
Back to top |
|
|
deltamalloc Apprentice
Joined: 18 Jan 2013 Posts: 279
|
Posted: Mon Jul 22, 2013 8:12 pm Post subject: |
|
|
NeddySeagoon wrote: | deltamalloc,
Please post the output of
When did you last compile your kernel ? |
Linux inspiron_500m 3.10.1 #4 PREEMPT Sun Jul 21 07:14:28 CEST 2013 i686 Intel(R) Pentium(R) M processor 1400MHz GenuineIntel GNU/Linux
I recompiled my kernel very recently. |
|
Back to top |
|
|
deltamalloc Apprentice
Joined: 18 Jan 2013 Posts: 279
|
Posted: Mon Jul 22, 2013 8:17 pm Post subject: |
|
|
albright wrote: | I seem to recall that my intel video required all
modules (agp, i915)
what versions of mesa, intel video driver, etc do
you have installed? |
Code: |
[ 19.038] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[ 19.091] (II) Module intel: vendor="X.Org Foundation"
[ 19.091] compiled for 1.13.4, module version = 2.20.13
[ 19.091] Module class: X.Org Video Driver
[ 19.091] ABI class: X.Org Video Driver, version 13.1
|
glxinfo does not work, it crashes in the same way glxgears, neverball, etc. does. Is there any other way I can check my mesa version? |
|
Back to top |
|
|
NeddySeagoon Administrator
Joined: 05 Jul 2003 Posts: 54450 Location: 56N 3W
|
Posted: Mon Jul 22, 2013 8:18 pm Post subject: |
|
|
deltamalloc,
That looks ok. Your running kernel build time is Sun Jul 21 07:14:28 CEST 2013, which is yesterday.
Its worth a check like this as many users fix their kernel problems but fail to run the kernel with the fix it for one reason or another.
Please put your present kernel config on a pastebin together with your current Xorg.0.log
Thats Code: | zcat /proc/config.gz | wgetpaste
wgetpaste /var/log/Xorg.0.log |
_________________ Regards,
NeddySeagoon
Computer users fall into two groups:-
those that do backups
those that have never had a hard drive fail. |
|
Back to top |
|
|
deltamalloc Apprentice
Joined: 18 Jan 2013 Posts: 279
|
Posted: Mon Jul 22, 2013 9:30 pm Post subject: |
|
|
NeddySeagoon wrote: | deltamalloc,
That looks ok. Your running kernel build time is Sun Jul 21 07:14:28 CEST 2013, which is yesterday.
Its worth a check like this as many users fix their kernel problems but fail to run the kernel with the fix it for one reason or another.
Please put your present kernel config on a pastebin together with your current Xorg.0.log
Thats Code: | zcat /proc/config.gz | wgetpaste
wgetpaste /var/log/Xorg.0.log |
|
Xorg.0.log:
http://pastebin.com/sL0ZkH05
Kernel .config:
http://pastebin.com/zha37yUP |
|
Back to top |
|
|
NeddySeagoon Administrator
Joined: 05 Jul 2003 Posts: 54450 Location: 56N 3W
|
Posted: Mon Jul 22, 2013 10:30 pm Post subject: |
|
|
deltamalloc,
Your log shows a normal Xorg startup.
What were you expecting Xorg to do when it starts?
How do you start Xorg ? _________________ Regards,
NeddySeagoon
Computer users fall into two groups:-
those that do backups
those that have never had a hard drive fail. |
|
Back to top |
|
|
albright Advocate
Joined: 16 Nov 2003 Posts: 2588 Location: Near Toronto
|
Posted: Mon Jul 22, 2013 10:33 pm Post subject: |
|
|
to check versions, I find it easy to use eix
that is, emerge -av eix
then eix -I mesa (for example)
would show mesa version _________________ .... there is nothing - absolutely nothing - half so much worth
doing as simply messing about with Linux ...
(apologies to Kenneth Graeme) |
|
Back to top |
|
|
deltamalloc Apprentice
Joined: 18 Jan 2013 Posts: 279
|
Posted: Mon Jul 22, 2013 11:06 pm Post subject: |
|
|
NeddySeagoon wrote: | deltamalloc,
Your log shows a normal Xorg startup.
What were you expecting Xorg to do when it starts?
How do you start Xorg ? |
I'm expecting it to execute the slim display manager. I let the startup scripts start X for me.
However I have also started X using startx. |
|
Back to top |
|
|
deltamalloc Apprentice
Joined: 18 Jan 2013 Posts: 279
|
Posted: Wed Jul 24, 2013 2:01 am Post subject: |
|
|
albright wrote: | to check versions, I find it easy to use eix
that is, emerge -av eix
then eix -I mesa (for example)
would show mesa version |
Sorry for the delay.
Regarding version of Mesa:
Code: |
Installed versions: 8.0.1(04:01:20 AM 07/20/2013)
|
|
|
Back to top |
|
|
albright Advocate
Joined: 16 Nov 2003 Posts: 2588 Location: Near Toronto
|
Posted: Wed Jul 24, 2013 11:35 am Post subject: |
|
|
Quote: | Installed versions: 8.0.1(04:01:20 AM 07/20/2013) |
that's very out of date; latest stable mesa is 9.1.2-r1 _________________ .... there is nothing - absolutely nothing - half so much worth
doing as simply messing about with Linux ...
(apologies to Kenneth Graeme) |
|
Back to top |
|
|
deltamalloc Apprentice
Joined: 18 Jan 2013 Posts: 279
|
Posted: Wed Jul 24, 2013 7:00 pm Post subject: |
|
|
albright wrote: | Quote: | Installed versions: 8.0.1(04:01:20 AM 07/20/2013) |
that's very out of date; latest stable mesa is 9.1.2-r1 |
Why would I have gotten such an old version? The Gentoo install is very recent (a week or so?). |
|
Back to top |
|
|
|