Gentoo Forums
Gentoo Forums
Gentoo Forums
Quick Search: in
USB not powered and no way to hotplug devices
View unanswered posts
View posts from last 24 hours

 
Reply to topic    Gentoo Forums Forum Index Kernel & Hardware
View previous topic :: View next topic  
Author Message
paolinx
n00b
n00b


Joined: 25 Nov 2014
Posts: 1

PostPosted: Tue Nov 25, 2014 2:57 pm    Post subject: USB not powered and no way to hotplug devices Reply with quote

hi,
i am attemping to setup my new gentoo system on an asus laptop.

I procedeed with some minor problems and it result i can connect to internet (even wireless), use gnome3, and move mouse pointer via touchpad.

Actually I CANNOT see any device connected to usb (lsusb does not change - neither dmesg report activity) .

Infrared led on my external mouse blink once time and then turn off .

I suspect it depends on some of erroneous kernel configuration, but i cannot find anything about and figure out how to fix it .

I provide here some logs about my laptop.

Quote:

# uname -a
Linux localhost 3.16.5-gentoo #4 SMP Tue Nov 25 14:00:35 CET 2014 x86_64 Intel(R) Core(TM) i7-3537U CPU @ 2.00GHz GenuineIntel GNU/Linux

# lspci
00:00.0 Host bridge: Intel Corporation 3rd Gen Core processor DRAM Controller (rev 09)
00:01.0 PCI bridge: Intel Corporation Xeon E3-1200 v2/3rd Gen Core processor PCI Express Root Port (rev 09)
00:02.0 VGA compatible controller: Intel Corporation 3rd Gen Core processor Graphics Controller (rev 09)
00:16.0 Communication controller: Intel Corporation 7 Series/C210 Series Chipset Family MEI Controller #1 (rev 04)
00:1a.0 USB controller: Intel Corporation 7 Series/C210 Series Chipset Family USB Enhanced Host Controller #2 (rev 04)
00:1b.0 Audio device: Intel Corporation 7 Series/C210 Series Chipset Family High Definition Audio Controller (rev 04)
00:1c.0 PCI bridge: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 1 (rev c4)
00:1c.1 PCI bridge: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 2 (rev c4)
00:1c.3 PCI bridge: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 4 (rev c4)
00:1d.0 USB controller: Intel Corporation 7 Series/C210 Series Chipset Family USB Enhanced Host Controller #1 (rev 04)
00:1f.0 ISA bridge: Intel Corporation HM76 Express Chipset LPC Controller (rev 04)
00:1f.2 SATA controller: Intel Corporation 7 Series Chipset Family 6-port SATA Controller [AHCI mode] (rev 04)
00:1f.3 SMBus: Intel Corporation 7 Series/C210 Series Chipset Family SMBus Controller (rev 04)
01:00.0 3D controller: NVIDIA Corporation GF117M [GeForce 610M/710M/820M / GT 620M/625M/630M/720M] (rev a1)
03:00.0 Network controller: Qualcomm Atheros AR9485 Wireless Network Adapter (rev 01)
04:00.0 Unassigned class [ff00]: Realtek Semiconductor Co., Ltd. Device 5289 (rev 01)
04:00.2 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 0a)

# eselect profile list
Available profile symlink targets:
[1] default/linux/amd64/13.0
[2] default/linux/amd64/13.0/selinux
[3] default/linux/amd64/13.0/desktop
[4] default/linux/amd64/13.0/desktop/gnome
[5] default/linux/amd64/13.0/desktop/gnome/systemd *
[6] default/linux/amd64/13.0/desktop/kde
[7] default/linux/amd64/13.0/desktop/kde/systemd
[8] default/linux/amd64/13.0/developer
[9] default/linux/amd64/13.0/no-emul-linux-x86
[10] default/linux/amd64/13.0/no-emul-linux-x86/desktop
[11] default/linux/amd64/13.0/no-multilib
[12] default/linux/amd64/13.0/x32
[13] hardened/linux/amd64
[14] hardened/linux/amd64/selinux
[15] hardened/linux/amd64/no-multilib
[16] hardened/linux/amd64/no-multilib/selinux
[17] hardened/linux/amd64/x32
[18] hardened/linux/musl/amd64
[19] default/linux/uclibc/amd64
[20] hardened/linux/uclibc/amd64

# cat /etc/portage/make.conf
# These settings were set by the catalyst build script that automatically
# built this stage.
# Please consult /usr/share/portage/config/make.conf.example for a more
# detailed example.
CFLAGS="-march=core2 -O2 -pipe"
CXXFLAGS="${CFLAGS}"
# WARNING: Changing your CHOST is not something that should be done lightly.
# Please consult http://www.gentoo.org/doc/en/change-chost.xml before changing.
CHOST="x86_64-pc-linux-gnu"
# These are the USE flags that were used in addition to what is provided by the
# profile used for building.
INPUT_DEVICES="evdev synaptics"
## (For nVidia cards)
VIDEO_CARDS="nouveau"
MAKEOPTS="-j5"
USE="bindist systemd mmx sse sse2 gnome gtk ffmpeg"
PORTDIR="/usr/portage"
DISTDIR="${PORTDIR}/distfiles"
PKGDIR="${PORTDIR}/packages"
GRUB_PLATFORMS="emu efi-32 efi-64 pc"



# dmesg
[ 15.149956] bus: 'cpu': really_probe: bound device cpu3 to driver processor
[ 15.540977] bus: 'acpi': add driver button
[ 15.541004] bus: 'acpi': driver_probe_device: matched device PNP0C0D:00 with driver button
[ 15.541007] bus: 'acpi': really_probe: probing driver button with device PNP0C0D:00
[ 15.541012] button PNP0C0D:00: no default pinctrl state
[ 15.541023] device: 'input13': device_add
[ 15.541053] PM: Adding info for No Bus:input13
[ 15.541068] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input13
[ 15.541074] device: 'event2': device_add
[ 15.541109] PM: Adding info for No Bus:event2
[ 15.541374] bus: 'acpi': add driver battery
[ 15.541386] bus: 'acpi': driver_probe_device: matched device PNP0C0A:00 with driver battery
[ 15.541387] bus: 'acpi': really_probe: probing driver battery with device PNP0C0A:00
[ 15.541390] battery PNP0C0A:00: no default pinctrl state
[ 15.541587] ACPI Error: No handler for Region [SMBX] (ffff88022dc4d500) [EmbeddedControl] (20140424/evregion-163)
[ 15.541631] ACPI Error: Region EmbeddedControl (ID=3) has no handler (20140424/exfldio-299)
[ 15.541664] ACPI Error: Method parse/execution failed [\_SB_.PCI0.LPCB.EC0_.SMBR] (Node ffff88022dc580e0), AE_NOT_EXIST (20140424/psparse-536)
[ 15.541719] ACPI Error: Method parse/execution failed [\_SB_.PCI0.LPCB.EC0_.BIF9] (Node ffff88022dc53ea0), AE_NOT_EXIST (20140424/psparse-536)
[ 15.541772] ACPI Error: Method parse/execution failed [\_SB_.PCI0.BAT0._BIF] (Node ffff88022dc53220), AE_NOT_EXIST (20140424/psparse-536)
[ 15.541822] ACPI Error: Method parse/execution failed [\_SB_.PCI0.BAT0._BIX] (Node ffff88022dc53180), AE_NOT_EXIST (20140424/psparse-536)
[ 15.541874] ACPI Exception: AE_NOT_EXIST, Evaluating _BIX (20140424/battery-461)
[ 15.561658] bus: 'acpi': add driver thermal
[ 15.561670] bus: 'acpi': driver_probe_device: matched device LNXTHERM:00 with driver thermal
[ 15.561671] bus: 'acpi': really_probe: probing driver thermal with device LNXTHERM:00
[ 15.561673] thermal LNXTHERM:00: no default pinctrl state
[ 15.562228] device: 'thermal_zone0': device_add
[ 15.562241] PM: Adding info for No Bus:thermal_zone0
[ 15.562403] thermal LNXTHERM:00: registered as thermal_zone0
[ 15.562404] ACPI: Thermal Zone [THRM] (67 C)
[ 15.562406] driver: 'thermal': driver_bound: bound to device 'LNXTHERM:00'
[ 15.562409] bus: 'acpi': really_probe: bound device LNXTHERM:00 to driver thermal
[ 15.563994] ACPI Error: No handler for Region [SMBX] (ffff88022dc4d500) [EmbeddedControl] (20140424/evregion-163)
[ 15.564036] ACPI Error: Region EmbeddedControl (ID=3) has no handler (20140424/exfldio-299)
[ 15.564069] ACPI Error: Method parse/execution failed [\_SB_.PCI0.LPCB.EC0_.SMBR] (Node ffff88022dc580e0), AE_NOT_EXIST (20140424/psparse-536)
[ 15.564122] ACPI Error: Method parse/execution failed [\_SB_.PCI0.LPCB.EC0_.BIF9] (Node ffff88022dc53ea0), AE_NOT_EXIST (20140424/psparse-536)
[ 15.564175] ACPI Error: Method parse/execution failed [\_SB_.PCI0.BAT0._BIF] (Node ffff88022dc53220), AE_NOT_EXIST (20140424/psparse-536)
[ 15.564226] ACPI Error: Method parse/execution failed [\_SB_.PCI0.BAT0._BIX] (Node ffff88022dc53180), AE_NOT_EXIST (20140424/psparse-536)
[ 15.564276] ACPI Exception: AE_NOT_EXIST, Evaluating _BIX (20140424/battery-461)
[ 15.573994] ACPI: Lid Switch [LID]
[ 15.573997] driver: 'button': driver_bound: bound to device 'PNP0C0D:00'
[ 15.574000] bus: 'acpi': really_probe: bound device PNP0C0D:00 to driver button
[ 15.574003] bus: 'acpi': driver_probe_device: matched device PNP0C0E:00 with driver button
[ 15.574004] bus: 'acpi': really_probe: probing driver button with device PNP0C0E:00
[ 15.574007] button PNP0C0E:00: no default pinctrl state
[ 15.574015] device: 'input14': device_add
[ 15.574043] PM: Adding info for No Bus:input14
[ 15.574058] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input14
[ 15.574064] device: 'event3': device_add
[ 15.574092] PM: Adding info for No Bus:event3
[ 15.574100] ACPI: Sleep Button [SLPB]
[ 15.574102] driver: 'button': driver_bound: bound to device 'PNP0C0E:00'
[ 15.574105] bus: 'acpi': really_probe: bound device PNP0C0E:00 to driver button
[ 15.574108] bus: 'acpi': driver_probe_device: matched device LNXPWRBN:00 with driver button
[ 15.574110] bus: 'acpi': really_probe: probing driver button with device LNXPWRBN:00
[ 15.574113] button LNXPWRBN:00: no default pinctrl state
[ 15.574120] device: 'input15': device_add
[ 15.574145] PM: Adding info for No Bus:input15
[ 15.574160] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input15
[ 15.574164] device: 'event4': device_add
[ 15.574192] PM: Adding info for No Bus:event4
[ 15.574199] ACPI: Power Button [PWRF]
[ 15.574297] bus: 'acpi': add driver ac
[ 15.594037] ACPI Error: No handler for Region [SMBX] (ffff88022dc4d500) [EmbeddedControl] (20140424/evregion-163)
[ 15.594080] ACPI Error: Region EmbeddedControl (ID=3) has no handler (20140424/exfldio-299)
[ 15.594113] ACPI Error: Method parse/execution failed [\_SB_.PCI0.LPCB.EC0_.SMBR] (Node ffff88022dc580e0), AE_NOT_EXIST (20140424/psparse-536)
[ 15.594167] ACPI Error: Method parse/execution failed [\_SB_.PCI0.LPCB.EC0_.BIF9] (Node ffff88022dc53ea0), AE_NOT_EXIST (20140424/psparse-536)
[ 15.594221] ACPI Error: Method parse/execution failed [\_SB_.PCI0.BAT0._BIF] (Node ffff88022dc53220), AE_NOT_EXIST (20140424/psparse-536)
[ 15.594271] ACPI Error: Method parse/execution failed [\_SB_.PCI0.BAT0._BIX] (Node ffff88022dc53180), AE_NOT_EXIST (20140424/psparse-536)
[ 15.594323] ACPI Exception: AE_NOT_EXIST, Evaluating _BIX (20140424/battery-461)
[ 15.624071] ACPI Error: No handler for Region [SMBX] (ffff88022dc4d500) [EmbeddedControl] (20140424/evregion-163)
[ 15.624114] ACPI Error: Region EmbeddedControl (ID=3) has no handler (20140424/exfldio-299)
[ 15.624147] ACPI Error: Method parse/execution failed [\_SB_.PCI0.LPCB.EC0_.SMBR] (Node ffff88022dc580e0), AE_NOT_EXIST (20140424/psparse-536)
[ 15.624201] ACPI Error: Method parse/execution failed [\_SB_.PCI0.LPCB.EC0_.BIF9] (Node ffff88022dc53ea0), AE_NOT_EXIST (20140424/psparse-536)
[ 15.624254] ACPI Error: Method parse/execution failed [\_SB_.PCI0.BAT0._BIF] (Node ffff88022dc53220), AE_NOT_EXIST (20140424/psparse-536)
[ 15.624303] ACPI Error: Method parse/execution failed [\_SB_.PCI0.BAT0._BIX] (Node ffff88022dc53180), AE_NOT_EXIST (20140424/psparse-536)
[ 15.624354] ACPI Exception: AE_NOT_EXIST, Evaluating _BIX (20140424/battery-461)
[ 15.633923] PM: Removing info for No Bus:event4
[ 15.650120] device class 'backlight': registering
[ 15.654106] ACPI Error: No handler for Region [SMBX] (ffff88022dc4d500) [EmbeddedControl] (20140424/evregion-163)
[ 15.654148] ACPI Error: Region EmbeddedControl (ID=3) has no handler (20140424/exfldio-299)
[ 15.654181] ACPI Error: Method parse/execution failed [\_SB_.PCI0.LPCB.EC0_.SMBR] (Node ffff88022dc580e0), AE_NOT_EXIST (20140424/psparse-536)
[ 15.654235] ACPI Error: Method parse/execution failed [\_SB_.PCI0.LPCB.EC0_.BIF9] (Node ffff88022dc53ea0), AE_NOT_EXIST (20140424/psparse-536)
[ 15.654288] ACPI Error: Method parse/execution failed [\_SB_.PCI0.BAT0._BIF] (Node ffff88022dc53220), AE_NOT_EXIST (20140424/psparse-536)
[ 15.654338] ACPI Error: Method parse/execution failed [\_SB_.PCI0.BAT0._BIX] (Node ffff88022dc53180), AE_NOT_EXIST (20140424/psparse-536)
[ 15.654389] ACPI Exception: AE_NOT_EXIST, Evaluating _BIX (20140424/battery-461)
[ 15.673961] PM: Removing info for No Bus:input15
[ 15.673982] button: probe of LNXPWRBN:00 failed with error -22
[ 15.683959] battery: probe of PNP0C0A:00 rejects match -19
[ 15.683967] bus: 'acpi': driver_probe_device: matched device ACPI0003:00 with driver ac
[ 15.683969] bus: 'acpi': really_probe: probing driver ac with device ACPI0003:00
[ 15.683973] ac ACPI0003:00: no default pinctrl state
[ 15.743684] bus: 'pci': add driver lpc_ich
[ 15.743698] bus: 'pci': driver_probe_device: matched device 0000:00:1f.0 with driver lpc_ich
[ 15.743700] bus: 'pci': really_probe: probing driver lpc_ich with device 0000:00:1f.0
[ 15.743703] lpc_ich 0000:00:1f.0: no default pinctrl state
[ 15.743721] Registering platform device 'iTCO_wdt'. Parent at 0000:00:1f.0
[ 15.743722] device: 'iTCO_wdt': device_add
[ 15.743726] bus: 'platform': add device iTCO_wdt
[ 15.743737] PM: Adding info for platform:iTCO_wdt
[ 15.743753] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042f conflicts with OpRegion 0x0000000000000400-0x000000000000044f (\GPIS) (20140424/utaddress-258)
[ 15.743821] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042f conflicts with OpRegion 0x0000000000000400-0x000000000000047f (\PMIO) (20140424/utaddress-258)
[ 15.743880] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 15.743883] ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054f conflicts with OpRegion 0x0000000000000500-0x000000000000057f (\GPIO) (20140424/utaddress-258)
[ 15.743941] ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054f conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GP01) (20140424/utaddress-258)
[ 15.745065] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 15.745072] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053f conflicts with OpRegion 0x0000000000000500-0x000000000000057f (\GPIO) (20140424/utaddress-258)
[ 15.746209] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053f conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GP01) (20140424/utaddress-258)
[ 15.747262] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 15.747269] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052f conflicts with OpRegion 0x0000000000000500-0x000000000000057f (\GPIO) (20140424/utaddress-258)
[ 15.748321] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052f conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GP01) (20140424/utaddress-258)
[ 15.748962] bus: 'pci': add driver rtsx_pci
[ 15.748969] bus: 'pci': driver_probe_device: matched device 0000:04:00.0 with driver rtsx_pci
[ 15.748970] bus: 'pci': really_probe: probing driver rtsx_pci with device 0000:04:00.0
[ 15.748972] rtsx_pci 0000:04:00.0: no default pinctrl state
[ 15.749659] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 15.749660] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 15.749666] ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[ 15.749671] device: 'AC0': device_add
[ 15.749704] PM: Adding info for No Bus:AC0
[ 15.749825] rtsx_pci 0000:04:00.0: irq 42 for MSI/MSI-X
[ 15.749840] rtsx_pci 0000:04:00.0: rtsx_pci_acquire_irq: pcr->msi_en = 1, pci->irq = 42
[ 15.750116] ACPI: AC Adapter [AC0] (on-line)
[ 15.750120] driver: 'ac': driver_bound: bound to device 'ACPI0003:00'
[ 15.750122] bus: 'acpi': really_probe: bound device ACPI0003:00 to driver ac
[ 15.750229] Registering platform device 'rtsx_pci_sdmmc.0'. Parent at 0000:04:00.0
[ 15.750230] device: 'rtsx_pci_sdmmc.0': device_add
[ 15.750234] bus: 'platform': add device rtsx_pci_sdmmc.0
[ 15.750249] PM: Adding info for platform:rtsx_pci_sdmmc.0
[ 15.750260] Registering platform device 'rtsx_pci_ms.0'. Parent at 0000:04:00.0
[ 15.750261] device: 'rtsx_pci_ms.0': device_add
[ 15.750265] bus: 'platform': add device rtsx_pci_ms.0
[ 15.750278] PM: Adding info for platform:rtsx_pci_ms.0
[ 15.750285] driver: 'rtsx_pci': driver_bound: bound to device '0000:04:00.0'
[ 15.750287] bus: 'pci': really_probe: bound device 0000:04:00.0 to driver rtsx_pci
[ 15.752241] driver: 'lpc_ich': driver_bound: bound to device '0000:00:1f.0'
[ 15.752245] bus: 'pci': really_probe: bound device 0000:00:1f.0 to driver lpc_ich
[ 16.018525] bus: 'pci': add driver i801_smbus
[ 16.018535] bus: 'pci': driver_probe_device: matched device 0000:00:1f.3 with driver i801_smbus
[ 16.018537] bus: 'pci': really_probe: probing driver i801_smbus with device 0000:00:1f.3
[ 16.018541] i801_smbus 0000:00:1f.3: no default pinctrl state
[ 16.018648] ACPI Warning: SystemIO range 0x000000000000f040-0x000000000000f05f conflicts with OpRegion 0x000000000000f040-0x000000000000f04f (\SMB0) (20140424/utaddress-258)
[ 16.019743] ACPI Warning: SystemIO range 0x000000000000f040-0x000000000000f05f conflicts with OpRegion 0x000000000000f040-0x000000000000f04f (\_SB_.PCI0.SBUS.SMBI) (20140424/utaddress-258)
[ 16.021975] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 16.021979] i801_smbus: probe of 0000:00:1f.3 rejects match -19
[ 16.056442] bus: 'platform': add driver pcspkr
[ 16.056450] bus: 'platform': driver_probe_device: matched device pcspkr with driver pcspkr
[ 16.056452] bus: 'platform': really_probe: probing driver pcspkr with device pcspkr
[ 16.056455] pcspkr pcspkr: no default pinctrl state
[ 16.056464] device: 'input16': device_add
[ 16.056495] PM: Adding info for No Bus:input16
[ 16.056510] input: PC Speaker as /devices/platform/pcspkr/input/input16
[ 16.056516] device: 'event4': device_add
[ 16.056545] PM: Adding info for No Bus:event4
[ 16.056552] driver: 'pcspkr': driver_bound: bound to device 'pcspkr'
[ 16.056555] bus: 'platform': really_probe: bound device pcspkr to driver pcspkr
[ 16.141428] Registering platform device 'microcode'. Parent at platform
[ 16.141431] device: 'microcode': device_add
[ 16.141436] bus: 'platform': add device microcode
[ 16.141451] PM: Adding info for platform:microcode
[ 16.141470] microcode: CPU1 sig=0x306a9, pf=0x10, revision=0x15
[ 16.141473] __allocate_fw_buf: fw-intel-ucode/06-3a-09 buf=ffff8802219b8100
[ 16.208328] device class 'drm': registering
[ 16.208340] [drm] Initialized drm 1.1.0 20060810
[ 16.273861] device: 'timer': device_add
[ 16.273893] PM: Adding info for No Bus:timer
[ 16.303230] bus: 'pci': add driver r8169
[ 16.303238] bus: 'pci': driver_probe_device: matched device 0000:04:00.2 with driver r8169
[ 16.303239] bus: 'pci': really_probe: probing driver r8169 with device 0000:04:00.2
[ 16.303242] r8169 0000:04:00.2: no default pinctrl state
[ 16.303248] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 16.303253] r8169 0000:04:00.2: can't disable ASPM; OS doesn't have ASPM control
[ 16.304571] r8169 0000:04:00.2: irq 43 for MSI/MSI-X
[ 16.304625] device: 'eth0': device_add
[ 16.304677] PM: Adding info for No Bus:eth0
[ 16.304765] r8169 0000:04:00.2 eth0: RTL8411 at 0xffffc900067cc000, e0:3f:49:b7:d4:d8, XID 08800800 IRQ 43
[ 16.304767] r8169 0000:04:00.2 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[ 16.304771] driver: 'r8169': driver_bound: bound to device '0000:04:00.2'
[ 16.304773] bus: 'pci': really_probe: bound device 0000:04:00.2 to driver r8169
[ 16.317702] __fw_free_buf: fw-intel-ucode/06-3a-09 buf=ffff8802219b8100 data= (null) size=0
[ 16.317745] microcode: CPU2 sig=0x306a9, pf=0x10, revision=0x15
[ 16.317749] __allocate_fw_buf: fw-intel-ucode/06-3a-09 buf=ffff8802219b8100
[ 16.317758] __fw_free_buf: fw-intel-ucode/06-3a-09 buf=ffff8802219b8100 data= (null) size=0
[ 16.317764] microcode: CPU3 sig=0x306a9, pf=0x10, revision=0x15
[ 16.317766] __allocate_fw_buf: fw-intel-ucode/06-3a-09 buf=ffff8802219b8100
[ 16.317785] __fw_free_buf: fw-intel-ucode/06-3a-09 buf=ffff8802219b8100 data= (null) size=0
[ 16.317793] device: 'microcode': device_add
[ 16.317856] PM: Adding info for No Bus:microcode
[ 16.317882] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 16.516151] device class 'rfkill': registering
[ 16.516174] device: 'rfkill': device_add
[ 16.516215] PM: Adding info for No Bus:rfkill
[ 16.582765] bus: 'pci': add driver snd_hda_intel
[ 16.582774] bus: 'pci': driver_probe_device: matched device 0000:00:1b.0 with driver snd_hda_intel
[ 16.582776] bus: 'pci': really_probe: probing driver snd_hda_intel with device 0000:00:1b.0
[ 16.582781] snd_hda_intel 0000:00:1b.0: no default pinctrl state
[ 16.582926] driver: 'snd_hda_intel': driver_bound: bound to device '0000:00:1b.0'
[ 16.582929] bus: 'pci': really_probe: bound device 0000:00:1b.0 to driver snd_hda_intel
[ 16.583018] snd_hda_intel 0000:00:1b.0: irq 44 for MSI/MSI-X
[ 16.627595] device class 'ieee80211': registering
[ 16.627631] Registering platform device 'regulatory.0'. Parent at platform
[ 16.627632] device: 'regulatory.0': device_add
[ 16.627637] bus: 'platform': add device regulatory.0
[ 16.627648] PM: Adding info for platform:regulatory.0
[ 16.627676] cfg80211: Calling CRDA to update world regulatory domain
[ 16.769071] sound hdaudioC0D0: autoconfig: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
[ 16.769074] sound hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 16.769076] sound hdaudioC0D0: hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
[ 16.769078] sound hdaudioC0D0: mono: mono_out=0x0
[ 16.769079] sound hdaudioC0D0: inputs:
[ 16.769081] sound hdaudioC0D0: Mic=0x19
[ 16.772136] sound hdaudioC0D3: autoconfig: line_outs=0 (0x0/0x0/0x0/0x0/0x0) type:line
[ 16.772138] sound hdaudioC0D3: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 16.772140] sound hdaudioC0D3: hp_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 16.772142] sound hdaudioC0D3: mono: mono_out=0x0
[ 16.772144] sound hdaudioC0D3: dig-out=0x6/0x0
[ 16.772145] sound hdaudioC0D3: inputs:
[ 16.775200] device: 'card0': device_add
[ 16.775228] PM: Adding info for No Bus:card0
[ 16.775241] device: 'controlC0': device_add
[ 16.775278] PM: Adding info for No Bus:controlC0
[ 16.775291] device: 'hdaudioC0D0': device_add
[ 16.775320] PM: Adding info for No Bus:hdaudioC0D0
[ 16.775327] device: 'hdaudioC0D3': device_add
[ 16.775354] PM: Adding info for No Bus:hdaudioC0D3
[ 16.775362] device: 'pcmC0D0p': device_add
[ 16.775389] PM: Adding info for No Bus:pcmC0D0p
[ 16.775403] device: 'pcmC0D0c': device_add
[ 16.775430] PM: Adding info for No Bus:pcmC0D0c
[ 16.775443] device: 'pcmC0D3p': device_add
[ 16.775468] PM: Adding info for No Bus:pcmC0D3p
[ 16.775481] device: 'hwC0D0': device_add
[ 16.775505] PM: Adding info for No Bus:hwC0D0
[ 16.775528] device: 'hwC0D3': device_add
[ 16.775552] PM: Adding info for No Bus:hwC0D3
[ 17.150133] AVX version of gcm_enc/dec engaged.
[ 17.684045] iTCO_vendor_support: vendor-support=0
[ 17.947391] device: 'kvm': device_add
[ 17.947422] PM: Adding info for No Bus:kvm
[ 18.039865] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[ 18.039868] bus: 'platform': add driver iTCO_wdt
[ 18.039887] bus: 'platform': driver_probe_device: matched device iTCO_wdt with driver iTCO_wdt
[ 18.039889] bus: 'platform': really_probe: probing driver iTCO_wdt with device iTCO_wdt
[ 18.039892] iTCO_wdt iTCO_wdt: no default pinctrl state
[ 18.039932] iTCO_wdt: Found a Panther Point TCO device (Version=2, TCOBASE=0x0460)
[ 18.039960] device: 'watchdog': device_add
[ 18.039997] PM: Adding info for No Bus:watchdog
[ 18.040008] device: 'watchdog0': device_add
[ 18.040034] PM: Adding info for No Bus:watchdog0
[ 18.040040] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=1)
[ 18.040041] driver: 'iTCO_wdt': driver_bound: bound to device 'iTCO_wdt'
[ 18.040043] bus: 'platform': really_probe: bound device iTCO_wdt to driver iTCO_wdt
[ 18.043130] net eth0: renaming to enp4s0f2
[ 18.076849] systemd-udevd[6363]: renamed network interface eth0 to enp4s0f2
[ 18.205575] bus: 'platform': add driver coretemp
[ 18.205606] Registering platform device 'coretemp.0'. Parent at platform
[ 18.205607] device: 'coretemp.0': device_add
[ 18.205611] bus: 'platform': add device coretemp.0
[ 18.205623] PM: Adding info for platform:coretemp.0
[ 18.205631] bus: 'platform': driver_probe_device: matched device coretemp.0 with driver coretemp
[ 18.205632] bus: 'platform': really_probe: probing driver coretemp with device coretemp.0
[ 18.205635] coretemp coretemp.0: no default pinctrl state
[ 18.205643] device: 'hwmon0': device_add
[ 18.205657] PM: Adding info for No Bus:hwmon0
[ 18.205661] driver: 'coretemp': driver_bound: bound to device 'coretemp.0'
[ 18.205663] bus: 'platform': really_probe: bound device coretemp.0 to driver coretemp
[ 18.205668] coretemp coretemp.0: TjMax is 105 degrees C
[ 18.205675] coretemp coretemp.0: TjMax is 105 degrees C
[ 18.205682] coretemp coretemp.0: TjMax is 105 degrees C
[ 18.439419] bus: 'pci': add driver ath9k
[ 18.439429] bus: 'pci': driver_probe_device: matched device 0000:03:00.0 with driver ath9k
[ 18.439430] bus: 'pci': really_probe: probing driver ath9k with device 0000:03:00.0
[ 18.439434] ath9k 0000:03:00.0: no default pinctrl state
[ 18.439577] ath: phy0: Disable PLL PowerSave
[ 18.445131] ath: phy0: timeout (1000 us) on reg 0x15f18: 0x00000000 & 0x00000007 != 0x00000004
[ 18.447783] ath: EEPROM regdomain: 0x60
[ 18.447784] ath: EEPROM indicates we should expect a direct regpair map
[ 18.447785] ath: Country alpha2 being used: 00
[ 18.447786] ath: Regpair used: 0x60
[ 18.448146] device: 'phy0': device_add
[ 18.448169] PM: Adding info for No Bus:phy0
[ 18.448190] device: 'rfkill0': device_add
[ 18.448207] PM: Adding info for No Bus:rfkill0
[ 18.578794] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 18.578809] device: 'wlan0': device_add
[ 18.578860] PM: Adding info for No Bus:wlan0
[ 18.578986] device: 'ath9k-phy0': device_add
[ 18.579000] PM: Adding info for No Bus:ath9k-phy0
[ 18.579012] ieee80211 phy0: Atheros AR9485 Rev:1 mem=0xffffc90006f80000, irq=17
[ 18.579014] driver: 'ath9k': driver_bound: bound to device '0000:03:00.0'
[ 18.579016] bus: 'pci': really_probe: bound device 0000:03:00.0 to driver ath9k
[ 18.579033] bus: 'platform': add driver ath9k
[ 18.750645] intel_rapl: RAPL domain dram detection failed
[ 18.751688] device: 'intel-rapl': device_add
[ 18.751702] PM: Adding info for No Bus:intel-rapl
[ 18.751792] device: 'intel-rapl:0': device_add
[ 18.751823] PM: Adding info for No Bus:intel-rapl:0
[ 18.751829] device: 'intel-rapl:0:0': device_add
[ 18.751856] PM: Adding info for No Bus:intel-rapl:0:0
[ 18.751861] device: 'intel-rapl:0:1': device_add
[ 18.751876] PM: Adding info for No Bus:intel-rapl:0:1
[ 18.821126] net wlan0: renaming to wlp3s0
[ 18.847717] systemd-udevd[6369]: renamed network interface wlan0 to wlp3s0
[ 19.507310] device: 'thermal_zone1': device_add
[ 19.507329] PM: Adding info for No Bus:thermal_zone1
[ 20.183342] device: 'vcs12': device_add
[ 20.183468] PM: Adding info for No Bus:vcs12
[ 20.183483] device: 'vcsa12': device_add
[ 20.183526] PM: Adding info for No Bus:vcsa12
[ 20.797283] nvidia: module license 'NVIDIA' taints kernel.
[ 20.798361] Disabling lock debugging due to kernel taint
[ 20.808413] bus: 'pci': add driver nvidia
[ 20.808421] bus: 'pci': driver_probe_device: matched device 0000:01:00.0 with driver nvidia
[ 20.808422] bus: 'pci': really_probe: probing driver nvidia with device 0000:01:00.0
[ 20.808426] nvidia 0000:01:00.0: no default pinctrl state
[ 20.808733] driver: 'nvidia': driver_bound: bound to device '0000:01:00.0'
[ 20.808737] bus: 'pci': really_probe: bound device 0000:01:00.0 to driver nvidia
[ 20.808794] device: 'card0': device_add
[ 20.808852] PM: Adding info for No Bus:card0
[ 20.808863] [drm] Initialized nvidia-drm 0.0.0 20130102 for 0000:01:00.0 on minor 0
[ 20.808867] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 343.22 Thu Sep 11 16:27:43 PDT 2014
[ 21.359283] cfg80211: World regulatory domain updated:
[ 21.359284] cfg80211: DFS Master region: unset
[ 21.359285] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[ 21.359287] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[ 21.359288] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[ 21.359289] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm), (N/A)
[ 21.359290] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[ 21.359291] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[ 22.847405] device: 'vcs2': device_add
[ 22.847449] PM: Adding info for No Bus:vcs2
[ 22.847466] device: 'vcsa2': device_add
[ 22.847522] PM: Adding info for No Bus:vcsa2
[ 22.847569] device: 'vcs3': device_add
[ 22.847933] PM: Adding info for No Bus:vcs3
[ 22.847944] device: 'vcsa3': device_add
[ 22.848078] PM: Adding info for No Bus:vcsa3
[ 22.848120] device: 'vcs4': device_add
[ 22.848204] PM: Adding info for No Bus:vcs4
[ 22.848213] device: 'vcsa4': device_add
[ 22.848243] PM: Adding info for No Bus:vcsa4
[ 22.848274] device: 'vcs5': device_add
[ 22.848303] PM: Adding info for No Bus:vcs5
[ 22.848311] device: 'vcsa5': device_add
[ 22.848629] PM: Adding info for No Bus:vcsa5
[ 22.848660] device: 'vcs6': device_add
[ 22.848682] PM: Adding info for No Bus:vcs6
[ 22.848689] device: 'vcsa6': device_add
[ 22.848736] PM: Adding info for No Bus:vcsa6
[ 23.600114] bus: 'acpi': add driver NVIDIA ACPI Video Driver
[ 23.600125] bus: 'acpi': driver_probe_device: matched device LNXVIDEO:00 with driver NVIDIA ACPI Video Driver
[ 23.600127] bus: 'acpi': really_probe: probing driver NVIDIA ACPI Video Driver with device LNXVIDEO:00
[ 23.600130] NVIDIA ACPI Video Driver LNXVIDEO:00: no default pinctrl state
[ 23.600180] driver: 'NVIDIA ACPI Video Driver': driver_bound: bound to device 'LNXVIDEO:00'
[ 23.600183] bus: 'acpi': really_probe: bound device LNXVIDEO:00 to driver NVIDIA ACPI Video Driver
[ 23.600192] bus: 'acpi': driver_probe_device: matched device LNXVIDEO:01 with driver NVIDIA ACPI Video Driver
[ 23.600193] bus: 'acpi': really_probe: probing driver NVIDIA ACPI Video Driver with device LNXVIDEO:01
[ 23.600206] NVIDIA ACPI Video Driver LNXVIDEO:01: no default pinctrl state
[ 23.623167] driver: 'NVIDIA ACPI Video Driver': driver_bound: bound to device 'LNXVIDEO:01'
[ 23.623171] bus: 'acpi': really_probe: bound device LNXVIDEO:01 to driver NVIDIA ACPI Video Driver
[ 23.645297] nvidia 0000:01:00.0: irq 45 for MSI/MSI-X
[ 23.647496] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20140424/nsarguments-95)
[ 23.648642] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20140424/nsarguments-95)
[ 23.649776] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20140424/nsarguments-95)
[ 23.650833] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20140424/nsarguments-95)
[ 23.651885] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20140424/nsarguments-95)
[ 23.652917] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20140424/nsarguments-95)
[ 23.653979] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20140424/nsarguments-95)
[ 23.654058] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20140424/nsarguments-95)
[ 24.543254] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20140424/nsarguments-95)
[ 24.732599] device: 'i2c-0': device_add
[ 24.732615] bus: 'i2c': add device i2c-0
[ 24.732629] PM: Adding info for i2c:i2c-0
[ 25.352595] bus: 'acpi': remove driver NVIDIA ACPI Video Driver
[ 25.352679] driver: 'NVIDIA ACPI Video Driver': driver_release
[ 29.657041] systemd-journald[4997]: /dev/kmsg buffer overrun, some messages lost.
[ 30.939307] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[ 30.991448] __allocate_fw_buf: fw-rtl_nic/rtl8411-1.fw buf=ffff8802218b3700
[ 30.991464] r8169 0000:04:00.2: Direct firmware load failed with error -2
[ 30.991490] r8169 0000:04:00.2: Falling back to user helper
[ 30.991510] device: 'rtl_nic!rtl8411-1.fw': device_add
[ 30.991529] PM: Adding info for No Bus:rtl_nic!rtl8411-1.fw
[ 30.991533] firmware rtl_nic!rtl8411-1.fw: firmware: requesting rtl_nic/rtl8411-1.fw
[ 30.992065] PM: Removing info for No Bus:rtl_nic!rtl8411-1.fw
[ 30.992075] __fw_free_buf: fw-rtl_nic/rtl8411-1.fw buf=ffff8802218b3700 data= (null) size=0
[ 30.992078] r8169 0000:04:00.2 enp4s0f2: unable to load firmware patch rtl_nic/rtl8411-1.fw (-12)
[ 31.014465] r8169 0000:04:00.2 enp4s0f2: link down
[ 31.014496] IPv6: ADDRCONF(NETDEV_UP): enp4s0f2: link is not ready
[ 31.409212] device: 'vcs7': device_add
[ 31.409246] PM: Adding info for No Bus:vcs7
[ 31.409259] device: 'vcsa7': device_add
[ 31.409525] PM: Adding info for No Bus:vcsa7
[ 33.284514] wlp3s0: authenticate with a0:f3:c1:84:a5:4e
[ 33.298717] wlp3s0: send auth to a0:f3:c1:84:a5:4e (try 1/3)
[ 33.301140] wlp3s0: authenticated
[ 33.304111] wlp3s0: associate with a0:f3:c1:84:a5:4e (try 1/3)
[ 33.310177] wlp3s0: RX AssocResp from a0:f3:c1:84:a5:4e (capab=0x431 status=0 aid=2)
[ 33.310223] wlp3s0: associated
[ 33.310244] IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready
[ 39.415310] device: 'lo': device_add
[ 39.415356] PM: Adding info for No Bus:lo
[ 107.448874] PM: Removing info for No Bus:lo







Back to top
View user's profile Send private message
DONAHUE
Watchman
Watchman


Joined: 09 Dec 2006
Posts: 6737
Location: Goose Creek SC

PostPosted: Tue Nov 25, 2014 7:46 pm    Post subject: Reply with quote

Code:
grep -i usb /usr/src/linux/.config
got drivers for usb?

Does menuconfig have:
Quote:
Device Drivers --->
[M] X86 Platform Specific Device Drivers --->
--- X86 Platform Specific Device Drivers
<M> Asus Laptop Extras

_________________
Defund the FCC.
Back to top
View user's profile Send private message
Display posts from previous:   
Reply to topic    Gentoo Forums Forum Index Kernel & Hardware All times are GMT
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum