Gentoo Forums
Gentoo Forums
Gentoo Forums
Quick Search: in
[solved]dmesg output is only partial
View unanswered posts
View posts from last 24 hours

 
Reply to topic    Gentoo Forums Forum Index Kernel & Hardware
View previous topic :: View next topic  
Author Message
hadrons123
Tux's lil' helper
Tux's lil' helper


Joined: 08 Mar 2012
Posts: 90
Location: chennai

PostPosted: Mon Jul 15, 2013 4:57 am    Post subject: [solved]dmesg output is only partial Reply with quote

I have been using Gentoo for a short while and I noticed that dmesg output is not shown full.
Can anyone guide why is this behaviour?

Code:
gentoo ~ # dmesg
[    0.710019] pci 0000:00:1c.1: PCI bridge to [bus 02]
[    0.710079] pci 0000:00:1c.1:   bridge window [mem 0xd0500000-0xd05fffff]
[    0.710146] pci 0000:00:1c.3: PCI bridge to [bus 03]
[    0.710206] pci 0000:00:1c.3:   bridge window [mem 0xd0400000-0xd04fffff]
[    0.710472] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
[    0.710474] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
[    0.710475] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[    0.710477] pci_bus 0000:00: resource 7 [mem 0xbfa00000-0xfeafffff]
[    0.710478] pci_bus 0000:01: resource 0 [io  0x2000-0x2fff]
[    0.710479] pci_bus 0000:01: resource 1 [mem 0xd0600000-0xd06fffff]
[    0.710481] pci_bus 0000:02: resource 1 [mem 0xd0500000-0xd05fffff]
[    0.710482] pci_bus 0000:03: resource 1 [mem 0xd0400000-0xd04fffff]
[    0.710566] NET: Registered protocol family 2
[    0.710801] TCP established hash table entries: 65536 (order: 8, 1048576 bytes)
[    0.710979] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    0.711139] TCP: Hash tables configured (established 65536 bind 65536)
[    0.711213] TCP: reno registered
[    0.711269] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[    0.711346] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[    0.711498] NET: Registered protocol family 1
[    0.711564] pci 0000:00:02.0: Boot video device
[    2.705550] pci 0000:00:1a.0: EHCI: BIOS handoff failed (BIOS bug?) 01010001
[    4.707253] pci 0000:00:1d.0: EHCI: BIOS handoff failed (BIOS bug?) 01010001
[    4.707505] pci 0000:01:00.0: set MSI_INTX_DISABLE_BUG flag
[    4.707605] PCI: CLS 64 bytes, default 64
[    4.707636] Trying to unpack rootfs image as initramfs...
[    5.031257] Freeing initrd memory: 2896k freed
[    5.031606] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    5.031666] software IO TLB [mem 0xb6abf000-0xbaabf000] (64MB) mapped at [ffff8800b6abf000-ffff8800baabefff]
[    5.031773] Simple Boot Flag at 0x44 set to 0x1
[    5.032412] audit: initializing netlink socket (disabled)
[    5.032477] type=2000 audit(1373769605.000:1): initialized
[    5.033132] VFS: Disk quotas dquot_6.5.2
[    5.033214] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    5.033596] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    5.033704] OCFS2 1.5.0
[    5.033831] ocfs2: Registered cluster interface o2cb
[    5.033888] OCFS2 DLMFS 1.5.0
[    5.033979] OCFS2 User DLM kernel interface loaded
[    5.034038] OCFS2 Node Manager 1.5.0
[    5.034169] OCFS2 DLM 1.5.0
[    5.034525] GFS2 installed
[    5.034582] msgmni has been set to 15727
[    5.034914] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[    5.034976] io scheduler noop registered
[    5.035032] io scheduler deadline registered
[    5.035109] io scheduler cfq registered (default)
[    5.035522] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    5.036134] Linux agpgart interface v0.103
[    5.037995] brd: module loaded
[    5.038946] loop: module loaded
[    5.039108] airo(): Probing for PCI adapters
[    5.039198] airo(): Finished probing for PCI adapters
[    5.039285] Loaded prism54 driver, version 1.2
[    5.039460] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:MSS1] at 0x60,0x64 irq 1,12
[    5.084536] serio: i8042 KBD port at 0x60,0x64 irq 1
[    5.084594] serio: i8042 AUX port at 0x60,0x64 irq 12
[    5.084819] mousedev: PS/2 mouse device common for all mice
[    5.084993] cpuidle: using governor ladder
[    5.085051] cpuidle: using governor menu
[    5.085172] hidraw: raw HID events driver (C) Jiri Kosina
[    5.086790] TCP: cubic registered
[    5.086846] NET: Registered protocol family 17
[    5.087476] registered taskstats version 1
[    5.087961] drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
[    5.088545] Freeing unused kernel memory: 772k freed
[    5.124528] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[    5.147772] ACPI: bus type ATA registered
[    5.147951] libata version 3.00 loaded.
[    5.780497] ahci 0000:00:1f.2: version 3.0
[    5.780637] ahci 0000:00:1f.2: irq 40 for MSI/MSI-X
[    5.780662] ahci: SSS flag set, parallel bus scan disabled
[    5.798217] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x7 impl SATA mode
[    5.798230] ahci 0000:00:1f.2: flags: 64bit ncq stag pm led clo pio slum part ems apst
[    5.798234] ahci 0000:00:1f.2: setting latency timer to 64
[    5.839292] scsi0 : ahci
[    5.839462] scsi1 : ahci
[    5.839600] scsi2 : ahci
[    5.839736] scsi3 : ahci
[    5.839871] scsi4 : ahci
[    5.840007] scsi5 : ahci
[    5.840146] ata1: SATA max UDMA/133 abar m2048@0xd0717000 port 0xd0717100 irq 40
[    5.840150] ata2: SATA max UDMA/133 abar m2048@0xd0717000 port 0xd0717180 irq 40
[    5.840153] ata3: SATA max UDMA/133 abar m2048@0xd0717000 port 0xd0717200 irq 40
[    5.840154] ata4: DUMMY
[    5.840155] ata5: DUMMY
[    5.840157] ata6: DUMMY
[    6.028399] tsc: Refined TSC clocksource calibration: 2394.562 MHz
[    6.028405] Switching to clocksource tsc
[    6.188523] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    6.188908] ata1.00: ATA-9: SanDisk SSD U100 16GB, 10.52.01, max UDMA/133
[    6.188912] ata1.00: 31277232 sectors, multi 1: LBA48 NCQ (depth 31/32)
[    6.189074] ata1.00: configured for UDMA/133
[    6.189184] scsi 0:0:0:0: Direct-Access     ATA      SanDisk SSD U100 10.5 PQ: 0 ANSI: 5
[    6.189364] sd 0:0:0:0: [sda] 31277232 512-byte logical blocks: (16.0 GB/14.9 GiB)
[    6.189432] sd 0:0:0:0: [sda] Write Protect is off
[    6.189434] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    6.189460] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    6.189903]  sda: sda1
[    6.190145] sd 0:0:0:0: [sda] Attached SCSI disk
[    6.538823] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    6.840742] ata2.00: ATA-8: ST9500325AS, 0001SDM1, max UDMA/133
[    6.840746] ata2.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32)
[    6.842844] ata2.00: configured for UDMA/133
[    6.842918] scsi 1:0:0:0: Direct-Access     ATA      ST9500325AS      0001 PQ: 0 ANSI: 5
[    6.843114] sd 1:0:0:0: [sdb] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[    6.843156] sd 1:0:0:0: [sdb] Write Protect is off
[    6.843158] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[    6.843175] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    6.873522]  sdb: sdb1 sdb2
[    6.873842] sd 1:0:0:0: [sdb] Attached SCSI disk
[    6.937869] psmouse serio1: synaptics: Touchpad model: 1, fw: 8.1, id: 0x1e2b1, caps: 0xd00123/0x840300/0x123c00, board id: 1800, fw id: 1087391
[    7.060064] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input1
[    7.189377] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    7.192691] ata3.00: ATAPI: HL-DT-ST DVDRAM GT50N, LC02, max UDMA/33
[    7.195650] ata3.00: configured for UDMA/33
[    7.197385] scsi 2:0:0:0: CD-ROM            HL-DT-ST DVDRAM GT50N     LC02 PQ: 0 ANSI: 5
[    7.201464] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[    7.201466] cdrom: Uniform CD-ROM driver Revision: 3.20
[    7.201618] sr 2:0:0:0: Attached scsi CD-ROM sr0
[    7.301468] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    7.301521] sd 1:0:0:0: Attached scsi generic sg1 type 0
[    7.301573] sr 2:0:0:0: Attached scsi generic sg2 type 5
[    7.434832] scsi: <fdomain> Detection failed (no card)
[    7.547259] GDT-HA: Storage RAID Controller Driver. Version: 3.05
[    7.797109] Fusion MPT base driver 3.04.20
[    7.797110] Copyright (c) 1999-2008 LSI Corporation
[    7.838776] Fusion MPT SPI Host driver 3.04.20
[    7.869109] Fusion MPT FC Host driver 3.04.20
[    7.895202] Fusion MPT SAS Host driver 3.04.20
[    7.915134] 3ware Storage Controller device driver for Linux v1.26.02.003.
[    7.935366] 3ware 9000 Storage Controller device driver for Linux v2.26.02.014.
[    7.955937] Compaq SMART2 Driver (v 2.6.0)
[    8.090643] HP CISS Driver (v 3.6.26)
[    8.154976] Adaptec aacraid driver 1.2-0[30200]-ms
[    8.201226] megaraid cmm: 2.20.2.7 (Release Date: Sun Jul 16 00:01:03 EST 2006)
[    8.202179] megaraid: 2.20.5.1 (Release Date: Thu Nov 16 15:32:35 EST 2006)
[    8.246064] megasas: 06.506.00.00-rc1 Sat. Feb. 9 17:00:00 PDT 2013
[    8.271040] qla2xxx [0000:00:00.0]-0005: : QLogic Fibre Channel HBA Driver: 8.05.00.03-k.
[    8.299984] Emulex LightPulse Fibre Channel SCSI driver 8.3.39
[    8.299985] Copyright(c) 2004-2009 Emulex.  All rights reserved.
[    8.354177] aic94xx: Adaptec aic94xx SAS/SATA driver version 1.0.3 loaded
[    8.392779] ACPI: bus type USB registered
[    8.392859] usbcore: registered new interface driver usbfs
[    8.392907] usbcore: registered new interface driver hub
[    8.392965] usbcore: registered new device driver usb
[    8.394318] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    8.395852] ehci-pci: EHCI PCI platform driver
[    8.395977] ehci-pci 0000:00:1a.0: setting latency timer to 64
[    8.395986] ehci-pci 0000:00:1a.0: EHCI Host Controller
[    8.395991] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[    8.396004] ehci-pci 0000:00:1a.0: debug port 2
[    8.399910] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[    8.399926] ehci-pci 0000:00:1a.0: irq 16, io mem 0xd0719000
[    8.410407] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[    8.410434] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    8.410438] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    8.410440] usb usb1: Product: EHCI Host Controller
[    8.410452] usb usb1: Manufacturer: Linux 3.10.1-gentoo ehci_hcd
[    8.410454] usb usb1: SerialNumber: 0000:00:1a.0
[    8.410603] hub 1-0:1.0: USB hub found
[    8.410606] hub 1-0:1.0: 2 ports detected
[    8.410761] ehci-pci 0000:00:1d.0: setting latency timer to 64
[    8.410767] ehci-pci 0000:00:1d.0: EHCI Host Controller
[    8.410771] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    8.410783] ehci-pci 0000:00:1d.0: debug port 2
[    8.414693] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[    8.414705] ehci-pci 0000:00:1d.0: irq 23, io mem 0xd0718000
[    8.430421] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[    8.430451] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[    8.430455] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    8.430468] usb usb2: Product: EHCI Host Controller
[    8.430469] usb usb2: Manufacturer: Linux 3.10.1-gentoo ehci_hcd
[    8.430471] usb usb2: SerialNumber: 0000:00:1d.0
[    8.430608] hub 2-0:1.0: USB hub found
[    8.430611] hub 2-0:1.0: 2 ports detected
[    8.485287] usbcore: registered new interface driver usb-storage
[    8.511222] uhci_hcd: USB Universal Host Controller Interface driver
[    8.537331] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    8.563741] xhci_hcd 0000:00:14.0: setting latency timer to 64
[    8.563745] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    8.563751] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
[    8.563839] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[    8.563860] xhci_hcd 0000:00:14.0: irq 41 for MSI/MSI-X
[    8.563910] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[    8.563912] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    8.563913] usb usb3: Product: xHCI Host Controller
[    8.563915] usb usb3: Manufacturer: Linux 3.10.1-gentoo xhci_hcd
[    8.563916] usb usb3: SerialNumber: 0000:00:14.0
[    8.564017] xHCI xhci_add_endpoint called for root hub
[    8.564018] xHCI xhci_check_bandwidth called for root hub
[    8.564070] hub 3-0:1.0: USB hub found
[    8.564079] hub 3-0:1.0: 4 ports detected
[    8.564359] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    8.564363] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
[    8.564384] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
[    8.564386] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    8.564387] usb usb4: Product: xHCI Host Controller
[    8.564389] usb usb4: Manufacturer: Linux 3.10.1-gentoo xhci_hcd
[    8.564390] usb usb4: SerialNumber: 0000:00:14.0
[    8.564474] xHCI xhci_add_endpoint called for root hub
[    8.564475] xHCI xhci_check_bandwidth called for root hub
[    8.564524] hub 4-0:1.0: USB hub found
[    8.564530] hub 4-0:1.0: 4 ports detected
[    8.688374] usbcore: registered new interface driver usbhid
[    8.688375] usbhid: USB HID core driver
[    8.730679] usb 1-1: new high-speed USB device number 2 using ehci-pci
[    8.881126] usb 1-1: New USB device found, idVendor=8087, idProduct=0024
[    8.881128] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    8.881446] hub 1-1:1.0: USB hub found
[    8.881496] hub 1-1:1.0: 6 ports detected
[    8.947695] RPC: Registered named UNIX socket transport module.
[    8.947696] RPC: Registered udp transport module.
[    8.947697] RPC: Registered tcp transport module.
[    8.947697] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    8.981259] fuse init (API version 7.22)
[    9.000907] usb 2-1: new high-speed USB device number 2 using ehci-pci
[    9.011420] Loading iSCSI transport class v2.0-870.
[    9.151352] usb 2-1: New USB device found, idVendor=8087, idProduct=0024
[    9.151355] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    9.151659] hub 2-1:1.0: USB hub found
[    9.151726] hub 2-1:1.0: 6 ports detected
[    9.271147] usb 3-1: new low-speed USB device number 2 using xhci_hcd
[    9.295228] usb 3-1: New USB device found, idVendor=045e, idProduct=0782
[    9.295232] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    9.295235] usb 3-1: Product: Microsoft USB Optical Mouse
[    9.295238] usb 3-1: Manufacturer: PixArt
[    9.295362] usb 3-1: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
[    9.297075] input: PixArt Microsoft USB Optical Mouse as /devices/pci0000:00/0000:00:14.0/usb3/3-1/3-1:1.0/input/input2
[    9.297230] hid-generic 0003:045E:0782.0001: input,hidraw0: USB HID v1.11 Mouse [PixArt Microsoft USB Optical Mouse] on usb-0000:00:14.0-1/input0
[    9.364886] EXT3-fs (sda1): error: couldn't mount because of unsupported optional features (240)
[    9.365120] EXT2-fs (sda1): error: couldn't mount because of unsupported optional features (240)
[    9.367448] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[    9.371294] usb 1-1.6: new full-speed USB device number 3 using ehci-pci
[    9.485012] usb 1-1.6: New USB device found, idVendor=04ca, idProduct=2003
[    9.485017] usb 1-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    9.485020] usb 1-1.6: Product: BCM20702A0
[    9.485023] usb 1-1.6: Manufacturer: Broadcom Corp
[    9.485025] usb 1-1.6: SerialNumber: 20689D7B3686
[    9.561464] usb 2-1.6: new high-speed USB device number 3 using ehci-pci
[    9.680179] usb 2-1.6: New USB device found, idVendor=04f2, idProduct=b2f1
[    9.680184] usb 2-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    9.680187] usb 2-1.6: Product: Lenovo EasyCamera
[    9.680190] usb 2-1.6: Manufacturer: Vimicro Corp.
[    9.805365] systemd-udevd[12404]: starting version 204
[    9.899749] microcode: CPU0 sig=0x306a9, pf=0x10, revision=0x13
[    9.900748] input: PC Speaker as /devices/platform/pcspkr/input/input3
[    9.912751] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:02/PNP0C0C:00/input/input4
[    9.912781] ACPI: Power Button [PWRB]
[    9.912835] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:02/PNP0C0E:00/input/input5
[    9.912860] ACPI: Sleep Button [SLPB]
[    9.912907] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input6
[    9.912962] ACPI: Lid Switch [LID0]
[    9.913007] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input7
[    9.913038] ACPI: Power Button [PWRF]
[    9.914089] ACPI: Requesting acpi_cpufreq
[    9.916775] Monitor-Mwait will be used to enter C-1 state
[    9.916783] Monitor-Mwait will be used to enter C-2 state
[    9.916791] ACPI: acpi_idle registered with cpuidle
[    9.920131] rtc_cmos 00:05: RTC can wake from S4
[    9.920293] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
[    9.920322] rtc_cmos 00:05: alarms up to one month, 242 bytes nvram, hpet irqs
[    9.921674] ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[    9.921721] ACPI: AC Adapter [ACAD] (on-line)
[    9.923936] ACPI Warning: 0x0000000000003040-0x000000000000305f SystemIO conflicts with Region \_SB_.PCI0.SBUS.SMBI 1 (20130328/utaddress-251)
[    9.923943] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    9.931632] [drm] Initialized drm 1.1.0 20060810
[    9.935458] thermal LNXTHERM:00: registered as thermal_zone0
[    9.935459] ACPI: Thermal Zone [TZ00] (54 C)
[    9.944941] snd_hda_intel 0000:00:1b.0: irq 42 for MSI/MSI-X
[    9.948972] cfg80211: Calling CRDA to update world regulatory domain
[    9.954391] alx 0000:01:00.0 eth0: Qualcomm Atheros AR816x/AR817x Ethernet [b8:88:e3:8f:0d:e9]
[    9.957043] Intel(R) Wireless WiFi driver for Linux, in-tree:
[    9.957045] Copyright(c) 2003-2013 Intel Corporation
[    9.957256] iwlwifi 0000:02:00.0: irq 43 for MSI/MSI-X
[    9.972885] [drm] Memory usable by graphics device = 2048M
[    9.972891] i915 0000:00:02.0: setting latency timer to 64
[    9.973969] iwlwifi 0000:02:00.0: loaded firmware version 18.168.6.1 op_mode iwldvm
[    9.990548] i915 0000:00:02.0: irq 44 for MSI/MSI-X
[    9.990556] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[    9.990557] [drm] Driver supports precise vblank timestamp query.
[    9.990646] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[   10.004191] iwlwifi 0000:02:00.0: CONFIG_IWLWIFI_DEBUG disabled
[   10.004193] iwlwifi 0000:02:00.0: CONFIG_IWLWIFI_DEBUGFS disabled
[   10.004195] iwlwifi 0000:02:00.0: CONFIG_IWLWIFI_DEVICE_TRACING disabled
[   10.004196] iwlwifi 0000:02:00.0: CONFIG_IWLWIFI_DEVICE_TESTMODE disabled
[   10.004198] iwlwifi 0000:02:00.0: CONFIG_IWLWIFI_P2P enabled
[   10.004200] iwlwifi 0000:02:00.0: Detected Intel(R) Centrino(R) Wireless-N 2200 BGN, REV=0x104
[   10.004255] iwlwifi 0000:02:00.0: L1 Enabled; Disabling L0S
[   10.025782] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs'
[   10.034019] microcode: CPU1 sig=0x306a9, pf=0x10, revision=0x13
[   10.034252] fbcon: inteldrmfb (fb0) is primary device
[   10.040232] microcode: CPU2 sig=0x306a9, pf=0x10, revision=0x13
[   10.040520] microcode: CPU3 sig=0x306a9, pf=0x10, revision=0x13
[   10.040726] microcode: CPU4 sig=0x306a9, pf=0x10, revision=0x13
[   10.040987] microcode: CPU5 sig=0x306a9, pf=0x10, revision=0x13
[   10.041465] microcode: CPU6 sig=0x306a9, pf=0x10, revision=0x13
[   10.041709] microcode: CPU7 sig=0x306a9, pf=0x10, revision=0x13
[   10.041980] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[   10.061868] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[   10.061872] ACPI: Battery Slot [BAT1] (battery present)
[   10.162061] systemd-udevd[12423]: renamed network interface eth0 to enp1s0
[   10.242095] systemd-udevd[12427]: renamed network interface wlan0 to wlp2s0
[   10.807826] Console: switching to colour frame buffer device 240x67
[   10.813186] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[   10.813187] i915 0000:00:02.0: registered panic notifier
[   10.814802] acpi device:42: registered as cooling_device8
[   10.814908] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[   10.814938] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input8
[   10.815001] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[   11.052970] [drm] Enabling RC6 states: RC6 on, RC6p on, RC6pp off
[   11.861046] EXT4-fs (sda1): re-mounted. Opts: (null)
[   12.518302] alx 0000:01:00.0: irq 45 for MSI/MSI-X
[   12.520863] alx 0000:01:00.0 enp1s0: NIC Up: 100 Mbps Full
[   24.262730] EXT4-fs (sda1): re-mounted. Opts: commit=0
[   36.897862] NET: Registered protocol family 10
[ 1915.092414] alx 0000:01:00.0 enp1s0: Link Down
[ 1928.140963] iwlwifi 0000:02:00.0: L1 Enabled; Disabling L0S
[ 1928.148612] iwlwifi 0000:02:00.0: Radio type=0x2-0x0-0x0
[ 1928.522277] iwlwifi 0000:02:00.0: L1 Enabled; Disabling L0S
[ 1928.529897] iwlwifi 0000:02:00.0: Radio type=0x2-0x0-0x0
[ 1928.717881] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[ 1956.755715] wlp2s0: authenticate with bc:f6:85:51:32:67
[ 1956.760798] wlp2s0: send auth to bc:f6:85:51:32:67 (try 1/3)
[ 1956.869243] wlp2s0: send auth to bc:f6:85:51:32:67 (try 2/3)
[ 1956.979326] wlp2s0: send auth to bc:f6:85:51:32:67 (try 3/3)
[ 1957.024143] wlp2s0: authenticated
[ 1957.029366] wlp2s0: associate with bc:f6:85:51:32:67 (try 1/3)
[ 1957.033013] wlp2s0: RX AssocResp from bc:f6:85:51:32:67 (capab=0x411 status=0 aid=1)
[ 1957.035447] wlp2s0: associated
[ 1957.035468] IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0: link becomes ready
[ 1967.045280] wlp2s0: disassociating from bc:f6:85:51:32:67 by local choice (reason=3)
[ 1967.078150] cfg80211: Calling CRDA to update world regulatory domain
[ 1967.078174] wlp2s0: deauthenticating from bc:f6:85:51:32:67 by local choice (reason=3)
[ 1967.474233] wlp2s0: authenticate with bc:f6:85:51:32:67
[ 1967.477527] wlp2s0: send auth to bc:f6:85:51:32:67 (try 1/3)
[ 1967.479392] wlp2s0: authenticated
[ 1967.488271] wlp2s0: associate with bc:f6:85:51:32:67 (try 1/3)
[ 1967.491713] wlp2s0: RX AssocResp from bc:f6:85:51:32:67 (capab=0x411 status=0 aid=1)
[ 1967.493372] wlp2s0: associated
[20999.081397] Watchdog[17788]: segfault at 0 ip 00007fec8b40b7fe sp 00007fec8028c5f0 error 6 in chrome[7fec8a735000+54cf000]
[21333.560776] Watchdog[19379]: segfault at 0 ip 00007f5952f457fe sp 00007f5947dc65f0 error 6 in chrome[7f595226f000+54cf000]
[25413.239150] usb 1-1.2: new high-speed USB device number 4 using ehci-pci
[25413.349950] usb 1-1.2: New USB device found, idVendor=04e8, idProduct=685b
[25413.349955] usb 1-1.2: New USB device strings: Mfr=2, Product=3, SerialNumber=4
[25413.349958] usb 1-1.2: Product: GT-I9100G
[25413.349961] usb 1-1.2: Manufacturer: samsung
[25413.349963] usb 1-1.2: SerialNumber: cff193fac1d30ae
[25413.350730] usb-storage 1-1.2:1.0: USB Mass Storage device detected
[25413.350848] scsi6 : usb-storage 1-1.2:1.0
[25414.350569] scsi 6:0:0:0: Direct-Access     samsung  File-CD Gadget   0000 PQ: 0 ANSI: 2
[25414.351043] scsi 6:0:0:1: Direct-Access     samsung  File-CD Gadget   0000 PQ: 0 ANSI: 2
[25414.351274] sd 6:0:0:0: Attached scsi generic sg3 type 0
[25414.351394] sd 6:0:0:1: Attached scsi generic sg4 type 0
[25414.358561] sd 6:0:0:0: [sdc] Attached SCSI removable disk
[25414.359306] sd 6:0:0:1: [sdd] Attached SCSI removable disk
[26092.745039] usb 1-1.2: USB disconnect, device number 4
[26249.532701] EXT4-fs (sda1): re-mounted. Opts: commit=600
[26249.984216] usb 3-1: USB disconnect, device number 2
[26250.442202] Monitor-Mwait will be used to enter C-2 state
[26250.442208] Monitor-Mwait will be used to enter C-3 state
[27389.163166] EXT4-fs (sda1): re-mounted. Opts: commit=0
[27399.169827] usb 1-1.2: new high-speed USB device number 5 using ehci-pci
[27399.280921] usb 1-1.2: New USB device found, idVendor=04e8, idProduct=685b
[27399.280925] usb 1-1.2: New USB device strings: Mfr=2, Product=3, SerialNumber=4
[27399.280928] usb 1-1.2: Product: GT-I9100G
[27399.280931] usb 1-1.2: Manufacturer: samsung
[27399.280933] usb 1-1.2: SerialNumber: cff193fac1d30ae
[27399.281805] usb-storage 1-1.2:1.0: USB Mass Storage device detected
[27399.281968] scsi7 : usb-storage 1-1.2:1.0
[27400.282267] scsi 7:0:0:0: Direct-Access     samsung  File-CD Gadget   0000 PQ: 0 ANSI: 2
[27400.283135] scsi 7:0:0:1: Direct-Access     samsung  File-CD Gadget   0000 PQ: 0 ANSI: 2
[27400.283417] sd 7:0:0:0: Attached scsi generic sg3 type 0
[27400.283651] sd 7:0:0:1: Attached scsi generic sg4 type 0
[27400.292130] sd 7:0:0:0: [sdc] Attached SCSI removable disk
[27400.294866] sd 7:0:0:1: [sdd] Attached SCSI removable disk
[27402.792748] usb 3-1: new low-speed USB device number 3 using xhci_hcd
[27402.816746] usb 3-1: New USB device found, idVendor=045e, idProduct=0782
[27402.816748] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[27402.816749] usb 3-1: Product: Microsoft USB Optical Mouse
[27402.816750] usb 3-1: Manufacturer: PixArt
[27402.816858] usb 3-1: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
[27402.818528] input: PixArt Microsoft USB Optical Mouse as /devices/pci0000:00/0000:00:14.0/usb3/3-1/3-1:1.0/input/input9
[27402.818760] hid-generic 0003:045E:0782.0002: input,hidraw0: USB HID v1.11 Mouse [PixArt Microsoft USB Optical Mouse] on usb-0000:00:14.0-1/input0
[27999.921320] usb 1-1.2: reset high-speed USB device number 5 using ehci-pci
[29723.388526] usb 1-1.2: reset high-speed USB device number 5 using ehci-pci
[30376.985033] usb 1-1.2: reset high-speed USB device number 5 using ehci-pci
[31033.543963] usb 1-1.2: reset high-speed USB device number 5 using ehci-pci
[32465.723296] usb 1-1.2: reset high-speed USB device number 5 using ehci-pci
[32972.114344] usb 1-1.2: reset high-speed USB device number 5 using ehci-pci
[39639.406629] usb 1-1.2: USB disconnect, device number 5
gentoo ~ #

_________________
LENOVO Y580 FHD Intel® Core™ i7-3630QM CPU @ 2.40GHz × 8 |660M GTX NVIDIA | 16GB SanDisk SSD


Last edited by hadrons123 on Mon Jul 15, 2013 5:14 am; edited 1 time in total
Back to top
View user's profile Send private message
s4e8
Guru
Guru


Joined: 29 Jul 2006
Posts: 311

PostPosted: Mon Jul 15, 2013 5:05 am    Post subject: Reply with quote

/var/log/dmesg contains early boot dmesg, or you can increase CONFIG_LOG_BUF_SHIFT and re-compile kernel.
Back to top
View user's profile Send private message
hadrons123
Tux's lil' helper
Tux's lil' helper


Joined: 08 Mar 2012
Posts: 90
Location: chennai

PostPosted: Mon Jul 15, 2013 5:14 am    Post subject: Reply with quote

/var/log/dmesg contains the same log. But I just found how to increase kernel log buffer size. Thanks for the tip though!
_________________
LENOVO Y580 FHD Intel® Core™ i7-3630QM CPU @ 2.40GHz × 8 |660M GTX NVIDIA | 16GB SanDisk SSD
Back to top
View user's profile Send private message
Display posts from previous:   
Reply to topic    Gentoo Forums Forum Index Kernel & Hardware All times are GMT
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum