SlashBeast Retired Dev
Joined: 23 May 2006 Posts: 2922
|
Posted: Sat Jun 15, 2013 1:34 pm Post subject: Intel 82574L (e1000e) not working for 4 hours after boot. |
|
|
I have strange issue with NIC 'Intel Corporation 82574L Gigabit Network Connection' which is propably integrated in a intel atom motherboard (kimsufi atom).
After I boot a kernel, gentoo-sources 3.9.5, NIC does not respond for about 4 hours, ping neither ssh works. I can boot rescue system there, tunnel over ssh the /dev/sda (nbd) and boot it in qemu-kvm here with no issue, so I know it boots just fine, also the uptime is over 4h as soon as I can get in there. Kernel is absolutly minimal (started with make allnoconfig) so there is no weird drivers and such. After boot I can see in dmesg:
Code: | [ 0.698367] usbhid: USB HID core driver
[ 0.698442] Netfilter messages via NETLINK v0.30.
[ 0.699469] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[ 0.699797] ctnetlink v0.93: registering with nfnetlink.
[ 0.699899] ip_set: protocol 6
[ 0.700062] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 0.700176] TCP: cubic registered
[ 0.700235] NET: Registered protocol family 17
[ 0.700799] registered taskstats version 1
[ 0.701492] rtc_cmos 00:06: setting system clock to 2013-06-15 07:56:58 UTC (1371283018)
[ 0.889947] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 0.890828] ata1.00: ATA-8: TOSHIBA DT01ACA050, MS1OA750, max UDMA/133
[ 0.890908] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 0.891843] ata1.00: configured for UDMA/133
[ 0.892118] scsi 0:0:0:0: Direct-Access ATA TOSHIBA DT01ACA0 MS1O PQ: 0 ANSI: 5
[ 0.892484] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[ 0.892581] sd 0:0:0:0: [sda] 4096-byte physical blocks
[ 0.892804] sd 0:0:0:0: [sda] Write Protect is off
[ 0.892867] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 0.892939] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 0.900497] sda: sda1 sda2
[ 0.901096] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.010016] usb 1-8: new high-speed USB device number 2 using ehci-pci
[ 1.160746] hub 1-8:1.0: USB hub found
[ 1.160968] hub 1-8:1.0: 4 ports detected
[ 1.240210] ata2: SATA link down (SStatus 0 SControl 300)
[ 1.240975] Freeing unused kernel memory: 764k freed
[ 1.520438] tsc: Refined TSC clocksource calibration: 1866.732 MHz
[ 1.520449] Switching to clocksource tsc
[ 3.202798] e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: None
[ 3.202921] e1000e 0000:01:00.0 eth0: 10/100 speed: disabling TSO
[14600.643213] nf_conntrack: automatic helper assignment is deprecated and it will be removed soon. Use the iptables CT target to attach helpers instead. |
And I have no idea what's wrong, the rescue system use 3.8.3 kernel and I can access it as soon as it boot. I have absolutly no idea wtf is going on here.
edit: reproduced like 6 times already, always after 4 hours I can login and ping it... |
|