Gentoo Forums
Gentoo Forums
Gentoo Forums
Quick Search: in
[SOLVED] Broadcom B43* Kernel conf problem
View unanswered posts
View posts from last 24 hours

 
Reply to topic    Gentoo Forums Forum Index Kernel & Hardware
View previous topic :: View next topic  
Author Message
sidaphextwin
n00b
n00b


Joined: 10 Jun 2013
Posts: 8

PostPosted: Fri Jun 14, 2013 5:37 pm    Post subject: [SOLVED] Broadcom B43* Kernel conf problem Reply with quote

Hello,
I'm trying to install the proprietary wl driver because my wireless card is not compatible with the B43 drivers.

When I run:

emerge-av net-wireless/broadcom-sta

I get this message:

* CONFIG_SSB: should not be set. But it is.

In the kernel configuration I can see this:

{M} Sonics Silicon Backplane support
│ │ - * - Support for SSB on PCI-bus host
│ │ [] Support for SSB on PCMCIA-bus host
│ │ [] Support for SSB on SDIO-bus host
│ │ [] SSB debugging
│ │ - * - SSB PCI core driver

That presumably is what I have to disable. The fact is that I can not turn it off, I can only add Sonics Silicon Backplane support as a module or enabled, but not disable it ...

Any idea?


Last edited by sidaphextwin on Sat Jun 15, 2013 11:06 pm; edited 1 time in total
Back to top
View user's profile Send private message
DONAHUE
Watchman
Watchman


Joined: 09 Dec 2006
Posts: 6254
Location: Goose Creek SC

PostPosted: Fri Jun 14, 2013 7:18 pm    Post subject: Reply with quote

if you look at the help for Sonics Silicon Backplane support in menuconfig, you will see something like:
Quote:
Selected by: B44 [=n] && NETDEVICES [=y] && ETHERNET [=y] && NET_VENDOR_BROADCOM [=y] && SSB_POSSIBLE [=y] && HAS_DMA [=y] || b43 [=n] && NETDEVICES [=y] && WLAN [=y] && SSB_POSSIBLE [=y] && MAC80211 [=m] && HAS_DMA [=y] || B43LEGACY [=n] && NETDEVICES [=y] && WLAN [=y] && SSB_POSSIBLE [=y] && MAC80211 [=m] && HAS_DMA [=y]
however in one or more places, where I have [=n] you will have [=m] or [=y] . this or these item(s) being enabled forces ssb to be enabled. Hunt them down and disable them. I have had occasions where enabling or disabling an automatic choice required exiting menuconfig saving and restarting menuconfig before I could see the change.
_________________
Defund the FCC.
Back to top
View user's profile Send private message
Mac Tzu
n00b
n00b


Joined: 13 May 2007
Posts: 42
Location: Melbourne, Australia

PostPosted: Sat Jun 15, 2013 1:17 am    Post subject: Reply with quote

Hey Guys,

So Sid,

I understand your issue I'm using gentoo-sources 3.9.3 and I couldn't find how to turn the option off. I should noted that my .config didn't have ssb (m) everything I could see was switched off in menuconfig. I even tried manually editing the .config (which doesn't work because the .config is refreshed when u call make)

My solution was to blacklist the module in .etc/modprode.d/blacklist.conf with the following :
Code:

blacklist SSB


let me know how you go or if there better solution
Back to top
View user's profile Send private message
sidaphextwin
n00b
n00b


Joined: 10 Jun 2013
Posts: 8

PostPosted: Sat Jun 15, 2013 5:42 pm    Post subject: Reply with quote

Hello,
finally thanks to the commentary of DONAHUE I could disable SSB from the kernel configuration. I disabled B44 support to remove Sonics Silicon Backplane.

Thanks for your help Mac Tzu.

Now my kernel configuration is correct but I still have problems compiling broadcom-sta-5.100.82.112-r2.

Here I post the output of emerge:


Quote:
>>> Emerging (1 of 1) net-wireless/broadcom-sta-5.100.82.112-r2
* hybrid-portsrc_x86_32-v5_100_82_112.tar.gz SHA256 size ;-) ... [ ok ]
* Determining the location of the kernel source code
* Found kernel source directory:
* /usr/src/linux
* Found kernel object directory:
* /lib/modules/3.8.13-gentoo/build
* Found sources for kernel version:
* 3.8.13-gentoo
* Checking for suitable kernel configuration options... [ ok ]
>>> Unpacking source...
>>> Unpacking hybrid-portsrc_x86_32-v5_100_82_112.tar.gz to /var/tmp/portage/net-wireless/broadcom-sta-5.100.82.112-r2/work
>>> Source unpacked in /var/tmp/portage/net-wireless/broadcom-sta-5.100.82.112-r2/work
>>> Preparing source in /var/tmp/portage/net-wireless/broadcom-sta-5.100.82.112-r2/work ...
* Applying broadcom-sta-5.10.91.9-license.patch ... [ ok ]
* Applying broadcom-sta-5.100.82.38-gcc.patch ... [ ok ]
* Applying broadcom-sta-5.100.82.111-linux-3.0.patch ... [ ok ]
* Applying broadcom-sta-5.100.82.112-linux-2.6.39.patch ... [ ok ]
* Applying broadcom-sta-5.100.82.112-linux-3.2.patch ... [ ok ]
>>> Source prepared.
>>> Configuring source in /var/tmp/portage/net-wireless/broadcom-sta-5.100.82.112-r2/work ...
>>> Source configured.
>>> Compiling source in /var/tmp/portage/net-wireless/broadcom-sta-5.100.82.112-r2/work ...
ln: fallo al crear el enlace simbólico «Module.symvers»: El fichero ya existe
* Preparing wl module
make -j5 HOSTCC=i686-pc-linux-gnu-gcc CROSS_COMPILE=i686-pc-linux-gnu- LDFLAGS= -C /usr/src/linux M=/var/tmp/portage/net-wireless/broadcom-sta-5.100.82.112-r2/work wl.ko
make: se ingresa al directorio `/usr/src/linux-3.8.13-gentoo'
CFG80211 API is prefered for this kernel version
Using CFG80211 API
CC [M] /var/tmp/portage/net-wireless/broadcom-sta-5.100.82.112-r2/work/src/shared/linux_osl.o
CC [M] /var/tmp/portage/net-wireless/broadcom-sta-5.100.82.112-r2/work/src/wl/sys/wl_linux.o
CC [M] /var/tmp/portage/net-wireless/broadcom-sta-5.100.82.112-r2/work/src/wl/sys/wl_iw.o
CC [M] /var/tmp/portage/net-wireless/broadcom-sta-5.100.82.112-r2/work/src/wl/sys/wl_cfg80211.o
/var/tmp/portage/net-wireless/broadcom-sta-5.100.82.112-r2/work/src/wl/sys/wl_cfg80211.c: En la función ‘wl_cfg80211_join_ibss’:
/var/tmp/portage/net-wireless/broadcom-sta-5.100.82.112-r2/work/src/wl/sys/wl_cfg80211.c:745:26: error: ‘struct cfg80211_ibss_params’ no tiene un miembro llamado ‘channel’
/var/tmp/portage/net-wireless/broadcom-sta-5.100.82.112-r2/work/src/wl/sys/wl_cfg80211.c: En el nivel principal:
/var/tmp/portage/net-wireless/broadcom-sta-5.100.82.112-r2/work/src/wl/sys/wl_cfg80211.c:1644:2: aviso: inicialización desde un tipo de puntero incompatible [activado por defecto]
/var/tmp/portage/net-wireless/broadcom-sta-5.100.82.112-r2/work/src/wl/sys/wl_cfg80211.c:1644:2: aviso: (cerca de la inicialización de ‘wl_cfg80211_ops.scan’) [activado por defecto]
/var/tmp/portage/net-wireless/broadcom-sta-5.100.82.112-r2/work/src/wl/sys/wl_cfg80211.c:1649:2: aviso: inicialización desde un tipo de puntero incompatible [activado por defecto]
/var/tmp/portage/net-wireless/broadcom-sta-5.100.82.112-r2/work/src/wl/sys/wl_cfg80211.c:1649:2: aviso: (cerca de la inicialización de ‘wl_cfg80211_ops.set_tx_power’) [activado por defecto]
/var/tmp/portage/net-wireless/broadcom-sta-5.100.82.112-r2/work/src/wl/sys/wl_cfg80211.c:1650:2: aviso: inicialización desde un tipo de puntero incompatible [activado por defecto]
/var/tmp/portage/net-wireless/broadcom-sta-5.100.82.112-r2/work/src/wl/sys/wl_cfg80211.c:1650:2: aviso: (cerca de la inicialización de ‘wl_cfg80211_ops.get_tx_power’) [activado por defecto]
/var/tmp/portage/net-wireless/broadcom-sta-5.100.82.112-r2/work/src/wl/sys/wl_cfg80211.c: En la función ‘wl_update_bss_info’:
/var/tmp/portage/net-wireless/broadcom-sta-5.100.82.112-r2/work/src/wl/sys/wl_cfg80211.c:2077:11: error: ‘struct cfg80211_bss’ no tiene un miembro llamado ‘information_elements’
/var/tmp/portage/net-wireless/broadcom-sta-5.100.82.112-r2/work/src/wl/sys/wl_cfg80211.c:2078:15: error: ‘struct cfg80211_bss’ no tiene un miembro llamado ‘len_information_elements’
make[1]: *** [/var/tmp/portage/net-wireless/broadcom-sta-5.100.82.112-r2/work/src/wl/sys/wl_cfg80211.o] Error 1
make[1]: *** Se espera a que terminen otras tareas....
/var/tmp/portage/net-wireless/broadcom-sta-5.100.82.112-r2/work/src/wl/sys/wl_linux.c:1736:1: aviso: se define ‘wl_set_multicast_list’ pero no se usa [-Wunused-function]
make: *** [wl.ko] Error 2
make: se sale del directorio `/usr/src/linux-3.8.13-gentoo'
* ERROR: net-wireless/broadcom-sta-5.100.82.112-r2 failed (compile phase):
* emake failed
*
* If you need support, post the output of `emerge --info '=net-wireless/broadcom-sta-5.100.82.112-r2'`,
* the complete build log and the output of `emerge -pqv '=net-wireless/broadcom-sta-5.100.82.112-r2'`.
* The complete build log is located at '/var/tmp/portage/net-wireless/broadcom-sta-5.100.82.112-r2/temp/build.log'.
* The ebuild environment file is located at '/var/tmp/portage/net-wireless/broadcom-sta-5.100.82.112-r2/temp/environment'.
* Working directory: '/var/tmp/portage/net-wireless/broadcom-sta-5.100.82.112-r2/work'
* S: '/var/tmp/portage/net-wireless/broadcom-sta-5.100.82.112-r2/work'

>>> Failed to emerge net-wireless/broadcom-sta-5.100.82.112-r2, Log file:

>>> '/var/tmp/portage/net-wireless/broadcom-sta-5.100.82.112-r2/temp/build.log'

* Messages for package net-wireless/broadcom-sta-5.100.82.112-r2:

* ERROR: net-wireless/broadcom-sta-5.100.82.112-r2 failed (compile phase):
* emake failed
*
* If you need support, post the output of `emerge --info '=net-wireless/broadcom-sta-5.100.82.112-r2'`,
* the complete build log and the output of `emerge -pqv '=net-wireless/broadcom-sta-5.100.82.112-r2'`.
* The complete build log is located at '/var/tmp/portage/net-wireless/broadcom-sta-5.100.82.112-r2/temp/build.log'.
* The ebuild environment file is located at '/var/tmp/portage/net-wireless/broadcom-sta-5.100.82.112-r2/temp/environment'.
* Working directory: '/var/tmp/portage/net-wireless/broadcom-sta-5.100.82.112-r2/work'
* S: '/var/tmp/portage/net-wireless/broadcom-sta-5.100.82.112-r2/work'


Any idea?

Thanks!
Back to top
View user's profile Send private message
DONAHUE
Watchman
Watchman


Joined: 09 Dec 2006
Posts: 6254
Location: Goose Creek SC

PostPosted: Sat Jun 15, 2013 7:18 pm    Post subject: Reply with quote

I was able to duplicate the compile problem you see.
Using a newer version of broadcom-sta allowed compilation to succeed.
add net-wireless/broadcom-sta ~amd64 to /etc/portage/package.keywords and try emerge broadcom-sta again
I don't have your NIC so can't test whether it works, but the new version at least will compile against a 3.9.5 kernel and hopefully a 3.8.13
_________________
Defund the FCC.
Back to top
View user's profile Send private message
sidaphextwin
n00b
n00b


Joined: 10 Jun 2013
Posts: 8

PostPosted: Sat Jun 15, 2013 11:06 pm    Post subject: Reply with quote

Compiled without error and my wireless card works perfectly.

Thanks DONAHUE!
Back to top
View user's profile Send private message
tomas.almeida
n00b
n00b


Joined: 28 Jun 2013
Posts: 2

PostPosted: Fri Jun 28, 2013 6:58 pm    Post subject: Reply with quote

Hi All,

I followed DONAHUE's instruction, but I still facing the same problem. Could you please help me on this case.

Some further information

Code:
cat /etc/portage/package.keywords
net-wireless/broadcom-sta ~amd64


Code:
>>> Emerging (2 of 2) net-wireless/broadcom-sta-5.100.82.112-r2
 * hybrid-portsrc_x86_64-v5_100_82_112.tar.gz SHA256 SHA512 WHIRLPOOL size ;-) ...                           [ ok ]
 * Determining the location of the kernel source code
 * Found kernel source directory:
 *     /usr/src/linux
 * Found kernel object directory:
 *     /lib/modules/3.8.13-gentoo/build
 * Found sources for kernel version:
 *     3.8.13-gentoo
 * Checking for suitable kernel configuration options...                                                     [ ok ]
>>> Unpacking source...
>>> Unpacking hybrid-portsrc_x86_64-v5_100_82_112.tar.gz to /var/tmp/portage/net-wireless/broadcom-sta-5.100.82.112-r2/work
>>> Source unpacked in /var/tmp/portage/net-wireless/broadcom-sta-5.100.82.112-r2/work
>>> Preparing source in /var/tmp/portage/net-wireless/broadcom-sta-5.100.82.112-r2/work ...
 * Applying broadcom-sta-5.10.91.9-license.patch ...                                                         [ ok ]
 * Applying broadcom-sta-5.100.82.38-gcc.patch ...                                                           [ ok ]
 * Applying broadcom-sta-5.100.82.111-linux-3.0.patch ...                                                    [ ok ]
 * Applying broadcom-sta-5.100.82.112-linux-2.6.39.patch ...                                                 [ ok ]
 * Applying broadcom-sta-5.100.82.112-linux-3.2.patch ...                                                    [ ok ]
>>> Source prepared.
>>> Configuring source in /var/tmp/portage/net-wireless/broadcom-sta-5.100.82.112-r2/work ...
>>> Source configured.
>>> Compiling source in /var/tmp/portage/net-wireless/broadcom-sta-5.100.82.112-r2/work ...
ln: failed to create symbolic link 'Module.symvers': File exists
 * Preparing wl module
make -j5 HOSTCC=x86_64-pc-linux-gnu-gcc CROSS_COMPILE=x86_64-pc-linux-gnu- 'LDFLAGS=-m elf_x86_64' -C /usr/src/linux M=/var/tmp/portage/net-wireless/broadcom-sta-5.100.82.112-r2/work wl.ko
make: Entering directory `/usr/src/linux-3.8.13-gentoo'
CFG80211 API is prefered for this kernel version
Using CFG80211 API
  CC [M]  /var/tmp/portage/net-wireless/broadcom-sta-5.100.82.112-r2/work/src/shared/linux_osl.o
  CC [M]  /var/tmp/portage/net-wireless/broadcom-sta-5.100.82.112-r2/work/src/wl/sys/wl_linux.o
  CC [M]  /var/tmp/portage/net-wireless/broadcom-sta-5.100.82.112-r2/work/src/wl/sys/wl_iw.o
  CC [M]  /var/tmp/portage/net-wireless/broadcom-sta-5.100.82.112-r2/work/src/wl/sys/wl_cfg80211.o
/var/tmp/portage/net-wireless/broadcom-sta-5.100.82.112-r2/work/src/wl/sys/wl_cfg80211.c: In function 'wl_cfg80211_join_ibss':
/var/tmp/portage/net-wireless/broadcom-sta-5.100.82.112-r2/work/src/wl/sys/wl_cfg80211.c:745:26: error: 'struct cfg80211_ibss_params' has no member named 'channel'
/var/tmp/portage/net-wireless/broadcom-sta-5.100.82.112-r2/work/src/wl/sys/wl_linux.c:1736:1: warning: 'wl_set_multicast_list' defined but not used [-Wunused-function]
/var/tmp/portage/net-wireless/broadcom-sta-5.100.82.112-r2/work/src/wl/sys/wl_cfg80211.c: At top level:
/var/tmp/portage/net-wireless/broadcom-sta-5.100.82.112-r2/work/src/wl/sys/wl_cfg80211.c:1644:2: warning: initialization from incompatible pointer type [enabled by default]
/var/tmp/portage/net-wireless/broadcom-sta-5.100.82.112-r2/work/src/wl/sys/wl_cfg80211.c:1644:2: warning: (near initialization for 'wl_cfg80211_ops.scan') [enabled by default]
/var/tmp/portage/net-wireless/broadcom-sta-5.100.82.112-r2/work/src/wl/sys/wl_cfg80211.c:1649:2: warning: initialization from incompatible pointer type [enabled by default]
/var/tmp/portage/net-wireless/broadcom-sta-5.100.82.112-r2/work/src/wl/sys/wl_cfg80211.c:1649:2: warning: (near initialization for 'wl_cfg80211_ops.set_tx_power') [enabled by default]
/var/tmp/portage/net-wireless/broadcom-sta-5.100.82.112-r2/work/src/wl/sys/wl_cfg80211.c:1650:2: warning: initialization from incompatible pointer type [enabled by default]
/var/tmp/portage/net-wireless/broadcom-sta-5.100.82.112-r2/work/src/wl/sys/wl_cfg80211.c:1650:2: warning: (near initialization for 'wl_cfg80211_ops.get_tx_power') [enabled by default]
/var/tmp/portage/net-wireless/broadcom-sta-5.100.82.112-r2/work/src/wl/sys/wl_cfg80211.c: In function 'wl_update_bss_info':
/var/tmp/portage/net-wireless/broadcom-sta-5.100.82.112-r2/work/src/wl/sys/wl_cfg80211.c:2077:11: error: 'struct cfg80211_bss' has no member named 'information_elements'
/var/tmp/portage/net-wireless/broadcom-sta-5.100.82.112-r2/work/src/wl/sys/wl_cfg80211.c:2078:15: error: 'struct cfg80211_bss' has no member named 'len_information_elements'
make[1]: *** [/var/tmp/portage/net-wireless/broadcom-sta-5.100.82.112-r2/work/src/wl/sys/wl_cfg80211.o] Error 1
make[1]: *** Waiting for unfinished jobs....
make: *** [wl.ko] Error 2
make: Leaving directory `/usr/src/linux-3.8.13-gentoo'
 * ERROR: net-wireless/broadcom-sta-5.100.82.112-r2 failed (compile phase):
 *   emake failed
 *
 * If you need support, post the output of `emerge --info '=net-wireless/broadcom-sta-5.100.82.112-r2'`,
 * the complete build log and the output of `emerge -pqv '=net-wireless/broadcom-sta-5.100.82.112-r2'`.
 * The complete build log is located at '/var/tmp/portage/net-wireless/broadcom-sta-5.100.82.112-r2/temp/build.log'.
 * The ebuild environment file is located at '/var/tmp/portage/net-wireless/broadcom-sta-5.100.82.112-r2/temp/environment'.
 * Working directory: '/var/tmp/portage/net-wireless/broadcom-sta-5.100.82.112-r2/work'
 * S: '/var/tmp/portage/net-wireless/broadcom-sta-5.100.82.112-r2/work'

>>> Failed to emerge net-wireless/broadcom-sta-5.100.82.112-r2, Log file:

>>>  '/var/tmp/portage/net-wireless/broadcom-sta-5.100.82.112-r2/temp/build.log'

 * Messages for package net-wireless/broadcom-sta-5.100.82.112-r2:

 * ERROR: net-wireless/broadcom-sta-5.100.82.112-r2 failed (compile phase):
 *   emake failed
 *
 * If you need support, post the output of `emerge --info '=net-wireless/broadcom-sta-5.100.82.112-r2'`,
 * the complete build log and the output of `emerge -pqv '=net-wireless/broadcom-sta-5.100.82.112-r2'`.
 * The complete build log is located at '/var/tmp/portage/net-wireless/broadcom-sta-5.100.82.112-r2/temp/build.log'.
 * The ebuild environment file is located at '/var/tmp/portage/net-wireless/broadcom-sta-5.100.82.112-r2/temp/environment'.
 * Working directory: '/var/tmp/portage/net-wireless/broadcom-sta-5.100.82.112-r2/work'
 * S: '/var/tmp/portage/net-wireless/broadcom-sta-5.100.82.112-r2/work'



I have a Dell Vostro 3500.

Thank you so much.

Tomás
Back to top
View user's profile Send private message
DONAHUE
Watchman
Watchman


Joined: 09 Dec 2006
Posts: 6254
Location: Goose Creek SC

PostPosted: Fri Jun 28, 2013 7:21 pm    Post subject: Reply with quote

Quote:
emerge -s broadcom-sta
Searching...
[ Results for search key : broadcom-sta ]
[ Applications found : 1 ]

* net-wireless/broadcom-sta
Latest version available: 6.30.223.30-r1
Latest version installed: [ Not Installed ]
So you want net-wireless/broadcom-sta- 6.30.223.30-r1 but you are getting net-wireless/broadcom-sta- 5.100.82.112-r2 which means there is a problem with /etc/portage/package.keywords
net-wireless/broadcom-sta ~amd64 . Your portage data may be out of date. Try
Code:
emerge --sync
emerge =net-wireless/broadcom-sta- 6.30.223.30-r1
If emerge fails please post every word of the response..
_________________
Defund the FCC.
Back to top
View user's profile Send private message
tomas.almeida
n00b
n00b


Joined: 28 Jun 2013
Posts: 2

PostPosted: Fri Jun 28, 2013 7:48 pm    Post subject: Reply with quote

Hi DONAHUE,

Thank you for your quick reply... I did the sync and it worked...

Code:

emerge -s broadcom-sta
Searching...
[ Results for search key : broadcom-sta ]
[ Applications found : 1 ]

*  net-wireless/broadcom-sta
      Latest version available: 6.30.223.30-r1
      Latest version installed: 6.30.223.30-r1
      Size of files: 1,737 kB
      Homepage:      https://launchpad.net/ubuntu/+source/bcmwl http://www.broadcom.com/support/802.11/linux_sta.php
      Description:   Broadcom's IEEE 802.11a/b/g/n hybrid Linux device driver.
      License:       Broadcom


Should I update my mirrors? I have this make.conf

Code:
 
cat /etc/portage/make.conf
# These settings were set by the catalyst build script that automatically
# built this stage.
# Please consult /usr/share/portage/config/make.conf.example for a more
# detailed example.
CFLAGS="-O2 -pipe -march=native"
CXXFLAGS="${CFLAGS}"
# WARNING: Changing your CHOST is not something that should be done lightly.
# Please consult http://www.gentoo.org/doc/en/change-chost.xml before changing.
CHOST="x86_64-pc-linux-gnu"
# These are the USE flags that were used in addition to what is provided by the
# profile used for building.
USE="bindist bzip2 alsa dvd dvdr cdr gif jpeg mp3 mp4 mpeg ogg opengl pdf png qt3support qt4 sound truetype usb X x264 xml xv xvid"
MAKEOPTS="-j5"

GENTOO_MIRRORS="rsync://gentoo.c3sl.ufpr.br/gentoo/ http://gentoo.c3sl.ufpr.br/ ftp://gentoo.c3sl.ufpr.br/gentoo/ http://www.las.ic.unicamp.br/pub/gentoo/ ftp://ftp.las.ic.unicamp.br/pub/gentoo/ http://ftp.rnl.ist.utl.pt/pub/gentoo/gentoo-distfiles/ rsync://ftp.rnl.ist.utl.pt/pub/gentoo/gentoo-distfiles/ ftp://ftp.rnl.ist.utl.pt/pub/gentoo/gentoo-distfiles/ http://gentoo-euetib.upc.es/mirror/gentoo/"

SYNC="rsync://rsync1.br.gentoo.org/gentoo-portage"


Thanks a bunch!
Back to top
View user's profile Send private message
DONAHUE
Watchman
Watchman


Joined: 09 Dec 2006
Posts: 6254
Location: Goose Creek SC

PostPosted: Fri Jun 28, 2013 8:41 pm    Post subject: Reply with quote

I don't use the GENTOO_MIRRORS=" at all and I use SYNC=" only to point at another machine on my lan. As best I can tell gentoo has an excellent load sharing setup without my help. :)
_________________
Defund the FCC.
Back to top
View user's profile Send private message
Display posts from previous:   
Reply to topic    Gentoo Forums Forum Index Kernel & Hardware All times are GMT
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum