| View previous topic :: View next topic |
| Author |
Message |
galaxy001
n00b
Joined: 15 Jun 2008
Posts: 11
|
 Posted: Mon Apr 08, 2013 7:06 pm Post subject: net.ppp0 cannot find ppp0 under udev-200, but pon works well |
 |
|
| Code: |
# /etc/init.d/net.ppp0 start
* Bringing up interface ppp0
* ERROR: interface ppp0 does not exist
* Ensure that you have loaded the correct kernel module for your hardware
* ERROR: net.ppp0 failed to start
|
/etc/conf.d/net
| Code: |
config_ppp0="ppp"
pppd_ppp0="persist
call myVPN
holdoff 10"
|
/etc/ppp/chap-secrets
| Code: |
# added by pptpsetup for myVPN
username myVPN "password" *
|
/etc/ppp/peers/myVPN
| Code: |
# written by pptpsetup
pty "pptp the.ip.address --nolaunchpppd"
lock
noauth
nobsdcomp
nodeflate
name username
remotename myVPN
ipparam myVPN
|
Also, ppp0 not in `/sys/class/net/`
However, `/etc/init.d/net.ppp0` failed while `pon myVPN` works well.
_________________
Galaxy |
|
| Back to top |
|
 |
Maleita
Apprentice
Joined: 16 Sep 2004
Posts: 246
Location: Brasil -> São Paulo->Campinas
|
| Posted: Mon Apr 08, 2013 9:39 pm Post subject: |
|
|
| Code: | macunaima ~ # ifconfig
eno1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500
inet 192.168.0.100 netmask 255.255.255.0 broadcast 192.168.0.255
inet6 fe80::ea40:f2ff:fee2:62f2 prefixlen 64 scopeid 0x20<link>
ether e8:40:f2:e2:62:f2 txqueuelen 1000 (Ethernet)
RX packets 2089 bytes 1511224 (1.4 MiB)
RX errors 0 dropped 1 overruns 0 frame 0
TX packets 1958 bytes 323407 (315.8 KiB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
device interrupt 20 memory 0xfe200000-fe220000
lo: flags=73<UP,LOOPBACK,RUNNING> mtu 65536
inet 127.0.0.1 netmask 255.0.0.0
inet6 ::1 prefixlen 128 scopeid 0x10<host>
loop txqueuelen 0 (Loopback Local)
RX packets 106 bytes 8980 (8.7 KiB)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 106 bytes 8980 (8.7 KiB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
macunaima ~ # |
The name of network interface was changed....... |
|
| Back to top |
|
|
galaxy001
n00b
Joined: 15 Jun 2008
Posts: 11
|
| Posted: Tue Apr 09, 2013 10:49 am Post subject: |
|
|
I know it is changed for real cards.
But virtual ppp0 still be ppp0 after pppd run.
I am using VPN over ent, ppp0 will only show up after running `pon myVPN`
So, how can I make udev to make a virtual ppp0 without running /usr/sbin/pppd from pon ?
Or, how to make net.ppp0 start without /sys/class/net/ppp0 ?
| Code: |
# ls -l /sys/class/net/
total 0
lrwxrwxrwx 1 root root 0 Apr 9 11:16 enp1s0 -> ../../devices/pci0000:00/0000:00:1c.7/0000:01:00.0/net/enp1s0
lrwxrwxrwx 1 root root 0 Apr 9 11:16 enp8s4 -> ../../devices/pci0000:00/0000:00:1e.0/0000:06:03.0/0000:08:04.0/net/enp8s4
lrwxrwxrwx 1 root root 0 Apr 9 11:16 enp8s5 -> ../../devices/pci0000:00/0000:00:1e.0/0000:06:03.0/0000:08:05.0/net/enp8s5
lrwxrwxrwx 1 root root 0 Apr 9 11:16 lo -> ../../devices/virtual/net/lo
lrwxrwxrwx 1 root root 0 Apr 9 11:18 ppp0 -> ../../devices/virtual/net/ppp0
lrwxrwxrwx 1 root root 0 Apr 9 11:16 sit0 -> ../../devices/virtual/net/sit0
lrwxrwxrwx 1 root root 0 Apr 9 11:16 tunl0 -> ../../devices/virtual/net/tunl0
lfconfig shows:
ppp0: flags=4305<UP,POINTOPOINT,RUNNING,NOARP,MULTICAST> mtu 1500
|
_________________
Galaxy |
|
| Back to top |
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
|
|
Networking & Security
