Gentoo Forums
Gentoo Forums
Gentoo Forums
Quick Search: in
Missing Ethernet device after udev upgrade
View unanswered posts
View posts from last 24 hours

 
Reply to topic    Gentoo Forums Forum Index Kernel & Hardware
View previous topic :: View next topic  
Author Message
dolohow
Tux's lil' helper
Tux's lil' helper


Joined: 17 Jan 2010
Posts: 98
Location: Poland

PostPosted: Sun Mar 31, 2013 12:35 pm    Post subject: Missing Ethernet device after udev upgrade Reply with quote

I'm missing my wired device after upgrade to udev-200:
Code:
ls /sys/class/net/
enp1s0/ lo/     sit0/   wlp2s6/


Code:
ifconfig
lo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536
        inet 127.0.0.1  netmask 255.0.0.0
        inet6 ::1  prefixlen 128  scopeid 0x10<host>
        loop  txqueuelen 0  (Local Loopback)
        RX packets 376  bytes 26752 (26.1 KiB)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 376  bytes 26752 (26.1 KiB)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

wlp2s6: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500
        inet 192.168.1.142  netmask 255.255.255.0  broadcast 192.168.1.255
        inet6 fe80::206:4fff:fe82:4e1d  prefixlen 64  scopeid 0x20<link>
        ether 00:06:4f:82:4e:1d  txqueuelen 1000  (Ethernet)
        RX packets 3880  bytes 2075043 (1.9 MiB)
        RX errors 0  dropped 20  overruns 0  frame 0
        TX packets 3942  bytes 1093946 (1.0 MiB)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0


Code:
lo        no wireless extensions.

wlp2s6    IEEE 802.11bg  ESSID:"" 
          Mode:Managed  Frequency:2.437 GHz  Access Point:
          Bit Rate=24 Mb/s   Tx-Power=20 dBm   
          Retry  long limit:7   RTS thr:off   Fragment thr:off
          Encryption key:off
          Power Management:off
          Link Quality=35/100  Signal level=35/100 
          Rx invalid nwid:0  Rx invalid crypt:0  Rx invalid frag:0
          Tx excessive retries:1  Invalid misc:0   Missed beacon:0

enp1s0    no wireless extensions.

sit0      no wireless extensions.


wlp2s6 is wireless, what about enp1s0 is that my wired device?
I haven't checked that before udev restart because I mainly using wireless on my desktop.

And I also have a question what is the purpose of changing the name of devcies to such "difficult"?
Back to top
View user's profile Send private message
Jaglover
Advocate
Advocate


Joined: 29 May 2005
Posts: 4560
Location: Saint Amant, Acadiana

PostPosted: Sun Mar 31, 2013 12:47 pm    Post subject: Reply with quote

eselect news read

Didn't portage warn you there are news to be read?
_________________
Please learn how to denote units correctly!
Back to top
View user's profile Send private message
dolohow
Tux's lil' helper
Tux's lil' helper


Joined: 17 Jan 2010
Posts: 98
Location: Poland

PostPosted: Sun Mar 31, 2013 12:49 pm    Post subject: Reply with quote

There was nothing about missing devices in ifconfig
Back to top
View user's profile Send private message
DaggyStyle
Advocate
Advocate


Joined: 22 Mar 2006
Posts: 4883

PostPosted: Sun Mar 31, 2013 2:16 pm    Post subject: Reply with quote

have you even bothered to check the forums? https://forums.gentoo.org/viewtopic-t-950366-start-0.html

moreover:
Code:
dagg@NCC-5001-D ~ $ eselect news list
News items:
  [1]      2009-04-18  Generation 1 Java Setup Deprecated
  [2]      2009-07-02  (2009-07-02-kdeprefix+monolithics - removed?)
  [3]      2010-03-25  Python 3.1
  [4]      2010-08-01  (2010-08-01-as-needed-default - removed?)
  [5]      2011-05-22  (2011-05-22-kdeprefix - removed?)
  [6]      2011-08-28  Mesa r600 driver now defaults to gallium
  [7]      2011-10-15  Upgrade to libpng15
  [8]      2012-03-16  (2012-03-16-udev-181-unmasking - removed?)
  [9]      2012-05-21  Portage config-protect-if-modified default
  [10]     2012-09-09  make.conf and make.profile move
  [11]     2012-11-06  PYTHON_TARGETS deployment
  [12]     2013-01-23  (2013-01-23-udev-upgrade - removed?)
  [13]     2013-03-29  Upgrading udev to version >=200
dagg@NCC-5001-D ~ $ eselect news read 13
2013-03-29-udev-upgrade
  Title                     Upgrading udev to version >=200
  Author                    Samuli Suominen <ssuominen@gentoo.org>
  Posted                    2013-03-29
  Revision                  2

This replaces the earlier news item about the udev 197 upgrade and
describes the predictable network interface names in more detail.

If you skip anything in this news item, your system will not be
bootable, or your networking will be down, or both.

Pay attention also to every message printed by emerge of sys-fs/udev
and sys-fs/udev-init-scripts as this news item may not be complete.

1. udev-postmount init script:

Remove the udev-postmount init script from your runlevels.

2. devtmpfs support:                                                                                                           
                                                                                                                               
You need at least version 2.6.32 of the kernel for devtmpfs                                                                     
functionality. Once you have this, make sure CONFIG_DEVTMPFS=y is set                                                           
in the kernel configuration. See the gentoo udev guide for the option in                                                       
make menuconfig [1].                                                                                                           
                                                                                                                               
If you have a line for /dev in /etc/fstab, make sure it is configured                                                           
for file system type devtmpfs (not tmpfs or any other type). Also, you                                                         
can remove this line if you prefer, since devtmpfs is mounted                                                                   
automatically.                                                                                                                 
                                                                                                                               
3. Old interface naming rules:

If the system still has old network interface renaming rules in
/etc/udev/rules.d, like 70-persistent-net.rules, those will need
to be either modified or removed.

If you choose to modify them, you must use free namespace (like net*
or internet*) instead of kernel namespace (like eth* or wlan*)
because in-place renaming has been deprecated, see small
documentation of it if you like[2].

The file 70-persistent-net.rules, like the 70-persistent-cd.rules
should be removed, so if you modify, rename the file also to something
else like 70-my-network.rules to silence the deprecation warning coming
from the end of the sys-fs/udev emerge.

This is the old format with reserved namespace:

SUBSYSTEM=="net", ACTION=="add", ATTR{address}=="xx:xx:xx:xx:xx:xx", NAME="eth0"
SUBSYSTEM=="net", ACTION=="add", ATTR{address}=="yy:yy:yy:yy:yy:yy", NAME="eth1"

This is the new format with free namespace:

SUBSYSTEM=="net", ACTION=="add", ATTR{address}=="xx:xx:xx:xx:xx:xx", NAME="net0"
SUBSYSTEM=="net", ACTION=="add", ATTR{address}=="yy:yy:yy:yy:yy:yy", NAME="net1"

4. predictable network interface names:

If /etc/udev/rules.d/80-net-name-slot.rules is an empty file or a
symlink to /dev/null, the new names will be disabled and the kernel will
do all the interface naming, and the resulting names may vary by kernel
configuration, hardware configuration and kernel version.

Also, the forementioned old 70-persistent-net.rules might interfere with
the new predictable interface names.

You can get attributes of your network interfaces using a command like
the following (replace eth0 with the name of the appropriate interface):

# udevadm test-builtin net_id /sys/class/net/eth0 2> /dev/null

You can copy /lib/udev/rules.d/80-net-name-slot.rules to
/etc/udev/rules.d and specify the attributes and in which order
they will be used for naming. See upstream wiki[3] for detailed list
of options.

You can prepare the system for the new names before booting for example
by renaming /etc/init.d/net.* symlinks, editing /etc/conf.d/net, etc.

The feature can also be completely disabled using net.ifnames=0on the
kernel command line.

If you only have one interface card, you don't necessarily have much
use for this feature as the name almost always stays at eth0, you can
easily disable it using forementioned methods.

This feature can also replace the functionality of sys-apps/biosdevname,
but you can still keep using it if you want.

In a normal new installation there are no files in /etc/udev/rules.d
and if you haven't edited any files you have in there, you should most
likely backup and delete them all if they don't belong to any packages.

The official wiki has a dedicated page for udev upgrade notes[4].

[1] http://www.gentoo.org/doc/en/udev-guide.xml
[2] http://www.kernel.org/doc/htmldocs/device-drivers/API-device-rename.html
[3] http://www.freedesktop.org/wiki/Software/systemd/PredictableNetworkInterfaceNames
[4] http://wiki.gentoo.org/wiki/Udev/upgrade


_________________
Only two things are infinite, the universe and human stupidity and I'm not sure about the former - Albert Einstein
ProjectFootball
Back to top
View user's profile Send private message
Prenj
n00b
n00b


Joined: 20 Nov 2011
Posts: 10

PostPosted: Sun Mar 31, 2013 7:45 pm    Post subject: Reply with quote

DaggyStyle wrote:
have you even bothered to check the forums? https://forums.gentoo.org/viewtopic-t-950366-start-0.html


Have maintainers even bothered to make it work? It breaks all kinds of things, sshd among them.
Back to top
View user's profile Send private message
DaggyStyle
Advocate
Advocate


Joined: 22 Mar 2006
Posts: 4883

PostPosted: Mon Apr 01, 2013 7:08 am    Post subject: Reply with quote

Prenj wrote:
DaggyStyle wrote:
have you even bothered to check the forums? https://forums.gentoo.org/viewtopic-t-950366-start-0.html


Have maintainers even bothered to make it work? It breaks all kinds of things, sshd among them.


to revert it, just delete the right file, it is written in the news and at that link.
_________________
Only two things are infinite, the universe and human stupidity and I'm not sure about the former - Albert Einstein
ProjectFootball
Back to top
View user's profile Send private message
Display posts from previous:   
Reply to topic    Gentoo Forums Forum Index Kernel & Hardware All times are GMT
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum