DeIM Guru
Joined: 11 Apr 2006 Posts: 429
|
Posted: Sun Jan 27, 2013 10:18 am Post subject: [Solved] fancontrol stopped working after kernel update |
|
|
Hi, I don't have a clue how to solve this problem.
I updated kernel from 3.2.1-r2 to 3.6.11 and fancontrol stopped working.
I've tried to reconfigure lm_sensors but it didn't help.
sensors-detect found several sensors but wrote only one - it87 to /etc/conf.d/lm_sensors
although it found:
Code: | AMD K8 thermal sensors... Success!
(driver `k8temp') |
Code: | /etc/init.d/lm_sensors restart
* Caching service dependencies ... [ ok ]
* Unloading lm_sensors modules...
* Unloading it87 ... [ !! ]
* Loading lm_sensors modules...
* Loading it87 ... [ !! ]
* Initializing sensors ... [ ok ] |
Code: | sensors
acpitz-virtual-0
Adapter: Virtual device
temp1: +13.0°C (crit = +80.0°C)
k8temp-pci-00c3
Adapter: PCI adapter
Core0 Temp: +13.0°C
Core0 Temp: +2.0°C
Core1 Temp: +13.0°C
Core1 Temp: +7.0°C |
/etc/conf.d/lm_sensors:
Code: | # Generated by sensors-detect on Sun Jan 27 11:05:38 2013
# This file is sourced by /etc/init.d/lm_sensors and defines the modules to
# be loaded/unloaded.
#
# The format of this file is a shell script that simply defines variables:
# HWMON_MODULES for hardware monitoring driver modules, and optionally
# BUS_MODULES for any required bus driver module (for example for I2C or SPI).
# Load modules at startup
LOADMODULES=yes
# Initialize sensors at startup
INITSENSORS=yes
HWMON_MODULES="it87"
# For compatibility reasons, modules are also listed individually as variables
# MODULE_0, MODULE_1, MODULE_2, etc.
# Please note that the numbers in MODULE_X must start at 0 and increase in
# steps of 1. Any number that is missing will make the init script skip the
# rest of the modules. Use MODULE_X_ARGS for arguments.
#
# You should use BUS_MODULES and HWMON_MODULES instead if possible.
MODULE_0=it87 |
Code: | /usr/sbin/pwmconfig: There are no pwm-capable sensor modules installed |
my PC:
System: BIOSTAR Group A690G M2+
Board: AMD A690G M2+
AMD Athlon(tm) Dual Core Processor 4050e
thanks in advance
Last edited by DeIM on Sun Mar 24, 2013 9:29 am; edited 1 time in total |
|