View previous topic :: View next topic |
Author |
Message |
emc Guru
Joined: 02 Jul 2004 Posts: 564 Location: Cracow, Poland
|
Posted: Fri Feb 15, 2013 7:07 pm Post subject: [solved] External DVD writer USB - no recognized |
|
|
Hi I have external DVD burner conncted via double USB cable. And my gentoo box didn't fully recognize it (no new dev), I can't mount any CD or DVD. Do I need any special kernel modules of configuration? Any help will be great!
# lsusb -s 005:002 -v
Code: | Bus 005 Device 002: ID 13fd:0841 Initio Corporation Samsung SE-T084M DVD-RW
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 0 (Defined at Interface level)
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 64
idVendor 0x13fd Initio Corporation
idProduct 0x0841 Samsung SE-T084M DVD-RW
bcdDevice 6.10
iManufacturer 1 TSSTcorp
iProduct 2 USB Mass Storage Device
iSerial 3 SATASLIM00000003e1c
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 32
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xc0
Self Powered
MaxPower 2mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 2
bInterfaceClass 8 Mass Storage
bInterfaceSubClass 2 SFF-8020i, MMC-2 (ATAPI)
bInterfaceProtocol 80
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x02 EP 2 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Device Qualifier (for other device speed):
bLength 10
bDescriptorType 6
bcdUSB 2.00
bDeviceClass 0 (Defined at Interface level)
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 64
bNumConfigurations 1
Device Status: 0x0001
Self Powered |
*EDIT
# dmesg | tail
Code: | usb 5-1: USB disconnect, device number 2
usb 5-1: new high-speed USB device number 3 using xhci_hcd
usb 5-1: New USB device found, idVendor=13fd, idProduct=0841
usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 5-1: Product: USB Mass Storage Device
usb 5-1: Manufacturer: TSSTcorp
usb 5-1: SerialNumber: SATASLIM00000003e1c
scsi8 : usb-storage 5-1:1.0
scsi 8:0:0:0: CD-ROM TSSTcorp CDDVDW SE-T084M TD02 PQ: 0 ANSI: 0
scsi 8:0:0:0: Attached scsi generic sg2 type 5 |
Last edited by emc on Sat Feb 16, 2013 12:09 am; edited 1 time in total |
|
Back to top |
|
|
BillWho Veteran
Joined: 03 Mar 2012 Posts: 1600 Location: US
|
Posted: Fri Feb 15, 2013 7:17 pm Post subject: |
|
|
emc,
You might want to check:
CONFIG_USB_STORAGE: │
│ │
│ Say Y here if you want to connect USB mass storage devices to your │
│ computer's USB port. This is the driver you need for USB │
│ floppy drives, USB hard disks, USB tape drives, USB CD-ROMs, │
│ USB flash devices, and memory sticks, along with │
│ similar devices. This driver may also be used for some cameras │
│ and card readers. _________________ Good luck
Since installing gentoo, my life has become one long emerge |
|
Back to top |
|
|
emc Guru
Joined: 02 Jul 2004 Posts: 564 Location: Cracow, Poland
|
Posted: Fri Feb 15, 2013 7:26 pm Post subject: |
|
|
Code: | # grep CONFIG_USB_STORAGE /usr/src/linux/.config
CONFIG_USB_STORAGE=m
# CONFIG_USB_STORAGE_DEBUG is not set
# CONFIG_USB_STORAGE_REALTEK is not set
# CONFIG_USB_STORAGE_DATAFAB is not set
# CONFIG_USB_STORAGE_FREECOM is not set
# CONFIG_USB_STORAGE_ISD200 is not set
# CONFIG_USB_STORAGE_USBAT is not set
# CONFIG_USB_STORAGE_SDDR09 is not set
# CONFIG_USB_STORAGE_SDDR55 is not set
# CONFIG_USB_STORAGE_JUMPSHOT is not set
# CONFIG_USB_STORAGE_ALAUDA is not set
# CONFIG_USB_STORAGE_ONETOUCH is not set
# CONFIG_USB_STORAGE_KARMA is not set
# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
# CONFIG_USB_STORAGE_ENE_UB6250 is not set |
and:
Code: | # lsmod | grep usb
usbhid 22867 0
usb_storage 42989 0
usbcore 123257 6 uvcvideo,usb_storage,ohci_hcd,ehci_hcd,usbhid,xhci_hcd
usb_common 907 1 usbcore |
|
|
Back to top |
|
|
BillWho Veteran
Joined: 03 Mar 2012 Posts: 1600 Location: US
|
Posted: Fri Feb 15, 2013 7:37 pm Post subject: |
|
|
emc,
Well that was the first obvious thing to check so I just threw that out there just in case
This is what I have set and I mount external hard drives, usb flash and cameras. Maybe this will help you
Code: | xen linux # awk '/USB/{if ($1 != "#") print}' /usr/src/linux/.config
CONFIG_RT2800USB=m
CONFIG_RT2800USB_RT33XX=y
CONFIG_RT2800USB_RT35XX=y
CONFIG_RT2800USB_RT53XX=y
CONFIG_RT2800USB_UNKNOWN=y
CONFIG_RT2X00_LIB_USB=m
CONFIG_SND_USB=y
CONFIG_SND_USB_AUDIO=m
CONFIG_USB_HID=m
CONFIG_USB_HIDDEV=y
CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB_ARCH_HAS_EHCI=y
CONFIG_USB_ARCH_HAS_XHCI=y
CONFIG_USB_SUPPORT=y
CONFIG_USB_COMMON=m
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB=m
CONFIG_USB_DEBUG=y
CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
CONFIG_USB_SUSPEND=y
CONFIG_USB_OTG=y
CONFIG_USB_OTG_WHITELIST=y
CONFIG_USB_MON=m
CONFIG_USB_XHCI_HCD=m
CONFIG_USB_EHCI_HCD=m
CONFIG_USB_EHCI_ROOT_HUB_TT=y
CONFIG_USB_EHCI_TT_NEWSCHED=y
CONFIG_USB_EHCI_PCI=m
CONFIG_USB_OHCI_HCD=m
CONFIG_USB_OHCI_HCD_PLATFORM=y
CONFIG_USB_OHCI_LITTLE_ENDIAN=y
CONFIG_USB_UHCI_HCD=m
CONFIG_USB_PRINTER=m
CONFIG_USB_STORAGE=m
CONFIG_USB_STORAGE_ENE_UB6250=m
CONFIG_USB_LED=m
CONFIG_USB_LD=m
CONFIG_USB_GADGET=m
CONFIG_USB_GADGET_VBUS_DRAW=2
CONFIG_USB_GADGET_STORAGE_NUM_BUFFERS=2
CONFIG_USB_LIBCOMPOSITE=m
CONFIG_USB_MASS_STORAGE=m
CONFIG_USB_G_PRINTER=m
CONFIG_USB_G_HID=m
|
_________________ Good luck
Since installing gentoo, my life has become one long emerge |
|
Back to top |
|
|
emc Guru
Joined: 02 Jul 2004 Posts: 564 Location: Cracow, Poland
|
Posted: Fri Feb 15, 2013 7:52 pm Post subject: |
|
|
With my USB setings external HDD, printer, pendrives, card readers working but noe external DVD/CD burner.
Code: | CONFIG_BT_HCIBFUSB=m
CONFIG_USB_CATC=m
CONFIG_USB_KAWETH=m
CONFIG_USB_PEGASUS=m
CONFIG_USB_RTL8150=m
CONFIG_USB_USBNET=m
CONFIG_USB_NET_AX8817X=m
CONFIG_USB_NET_CDCETHER=m
CONFIG_USB_NET_CDC_NCM=m
CONFIG_USB_NET_DM9601=m
CONFIG_USB_NET_NET1080=m
CONFIG_USB_NET_MCS7830=m
CONFIG_USB_NET_ZAURUS=m
CONFIG_MOUSE_SYNAPTICS_USB=m
CONFIG_MEDIA_USB_SUPPORT=y
CONFIG_USB_VIDEO_CLASS=m
CONFIG_USB_VIDEO_CLASS_INPUT_EVDEV=y
CONFIG_USB_HID=m
CONFIG_USB_HIDDEV=y
CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB_ARCH_HAS_EHCI=y
CONFIG_USB_ARCH_HAS_XHCI=y
CONFIG_USB_SUPPORT=y
CONFIG_USB_COMMON=m
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB=m
CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
CONFIG_USB_XHCI_HCD=m
CONFIG_USB_EHCI_HCD=m
CONFIG_USB_OHCI_HCD=m
CONFIG_USB_OHCI_HCD_SSB=y
CONFIG_USB_OHCI_HCD_PLATFORM=y
CONFIG_USB_EHCI_HCD_PLATFORM=y
CONFIG_USB_OHCI_LITTLE_ENDIAN=y
CONFIG_USB_HCD_SSB=m
CONFIG_USB_ACM=m
CONFIG_USB_PRINTER=m
CONFIG_USB_STORAGE=m
CONFIG_USBIP_CORE=m
CONFIG_USBIP_VHCI_HCD=m
CONFIG_USBIP_HOST=m |
Maybe I need some ATAPI suppor since lsusb shows:
Code: | bInterfaceSubClass 2 SFF-8020i, MMC-2 (ATAPI) |
or some older CD interface? Anybody? |
|
Back to top |
|
|
NeddySeagoon Administrator
Joined: 05 Jul 2003 Posts: 54237 Location: 56N 3W
|
Posted: Fri Feb 15, 2013 8:16 pm Post subject: |
|
|
emc,
You will need SCSI CDROM support in the kernel.
emc wrote: | ... conncted via double USB cable ... |
Thats a big fat warning. Your device needs more than 500mA to power it. Perhaps as much as 1000mA
You must not connect both USB connectors to the same root hub or the load sharing that is required to power your device won't happen and the USB port will go into an over current condition.
When happens then varies from nothing at all, to nothing on the overloaded root hub working at all. _________________ Regards,
NeddySeagoon
Computer users fall into two groups:-
those that do backups
those that have never had a hard drive fail. |
|
Back to top |
|
|
emc Guru
Joined: 02 Jul 2004 Posts: 564 Location: Cracow, Poland
|
Posted: Fri Feb 15, 2013 9:00 pm Post subject: |
|
|
NeddySeagoon wrote: | emc,
You will need SCSI CDROM support in the kernel.
emc wrote: | ... conncted via double USB cable ... |
Thats a big fat warning. Your device needs more than 500mA to power it. Perhaps as much as 1000mA
You must not connect both USB connectors to the same root hub or the load sharing that is required to power your device won't happen and the USB port will go into an over current condition.
When happens then varies from nothing at all, to nothing on the overloaded root hub working at all. |
I've connected only one cable and it start working
Code: | gopher ~ # dmesg | tail
usb 5-1: Product: USB Mass Storage Device
usb 5-1: Manufacturer: TSSTcorp
usb 5-1: SerialNumber: SATASLIM00000003e1c
scsi11 : usb-storage 5-1:1.0
scsi 11:0:0:0: CD-ROM TSSTcorp CDDVDW SE-T084M TD02 PQ: 0 ANSI: 0
scsi 11:0:0:0: Attached scsi generic sg2 type 5
sr0: scsi3-mmc drive: 8x/24x writer dvd-ram cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 11:0:0:0: Attached scsi CD-ROM sr0
usb 5-1: USB disconnect, device number 5 |
These same result when I used USB extend cable to connect one on other side of laptop, so not the same HUB!
So final question why use duble USB cable when it working just fine with one, or I'm wrong? |
|
Back to top |
|
|
emc Guru
Joined: 02 Jul 2004 Posts: 564 Location: Cracow, Poland
|
Posted: Fri Feb 15, 2013 9:05 pm Post subject: |
|
|
btw it's working without SCSI CDROM support
Code: | # grep BLK_DEV_SR /usr/src/linux/.config
# CONFIG_BLK_DEV_SR is not set |
|
|
Back to top |
|
|
|