View previous topic :: View next topic |
Author |
Message |
Nicolas_Y n00b
![n00b n00b](/images/ranks/rank_rect_0.gif)
Joined: 05 Jan 2013 Posts: 1
|
Posted: Sat Jan 05, 2013 11:11 am Post subject: Not working : Belkin Wireless USB F7D2102 / rtl8192cu |
|
|
Hello,
I've been offered a USB wireless interface. Unfortunately I'm unable to make it work out.
Before I would test the ndiswrapper option, I would appreciate some advices.
I use the kernel gentoo-sources-3.5.7
Code: |
localhost linux # uname -r
3.5.7-gentoo
|
wpa_supplicant and linux-firmware are emerged.
Result of lsusb is:
Code: |
localhost linux # lsusb
Bus 001 Device 002: ID 050d:2103 Belkin Components F7D2102 802.11n N300 Micro Wireless Adapter v3000 [Realtek RTL8192CU]
Bus 001 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
|
rtl8192cu - as described by the output of lsusb - is compiled as a kernel module and loaded :
Code: |
localhost linux # pwd -P
/usr/src/linux-3.5.7-gentoo
localhost linux # grep 8192 .config
# CONFIG_RTL8192CE is not set
# CONFIG_RTL8192SE is not set
# CONFIG_RTL8192DE is not set
CONFIG_RTL8192CU=m
CONFIG_RTL8192C_COMMON=m
localhost linux # lsmod
Module Size Used by
rtl8192cu 82195 0
rtl8192c_common 49008 1 rtl8192cu
rtlwifi 82684 1 rtl8192cu
3c59x 29257 0
|
the dmesg log shows neither warning nor errors for keywords 8192 :
Code: |
localhost linux # dmesg |grep 8192
[ 0.259915] IP route cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.261445] TCP established hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.261733] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.262066] TCP: Hash tables configured (established 8192 bind 8192)
[ 0.262264] UDP hash table entries: 256 (order: 1, 8192 bytes)
[ 0.262384] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
[ 7.060686] rtl8192cu 1-2:1.0: usb_probe_interface
[ 7.060708] rtl8192cu 1-2:1.0: usb_probe_interface - got id
[ 7.063654] rtl8192cu: Chip version 0x11
[ 7.864541] rtl8192cu: MAC address: ec:1a:59:0e:e9:5a
[ 7.864568] rtl8192cu: Board Type 0
[ 7.866651] rtl8192cu: Loading firmware rtlwifi/rtl8192cufw.bin
[ 7.869603] usbcore: registered new interface driver rtl8192cu
[ 12.364774] rtl8192cu: MAC auto ON okay!
[ 12.624748] rtl8192cu: Tx queue select: 0x05
|
I can see the interface after commanding ifconfig -a
Code: |
localhost linux # ifconfig -a
eth0 Link encap:Ethernet HWaddr 00:06:5b:12:a4:89
inet addr:192.168.1.11 Bcast:192.168.1.255 Mask:255.255.255.0
inet6 addr: fe80::206:5bff:fe12:a489/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:638 errors:0 dropped:1 overruns:0 frame:0
TX packets:439 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:79556 (77.6 KiB) TX bytes:95583 (93.3 KiB)
Interrupt:11 Base address:0xec00
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
sit0 Link encap:IPv6-in-IPv4
NOARP MTU:1480 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
wlan0 Link encap:Ethernet HWaddr ec:1a:59:0e:e9:5a
UP BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
|
No IP address while I described it as a static in /etc/conf.d/net
Code: |
localhost linux # cat /etc/conf.d/net
# This blank configuration will automatically use DHCP for any net.*
# scripts in /etc/init.d. To create a more complete configuration,
# please review /etc/conf.d/net.example and save your configuration
# in /etc/conf.d/net (this file :]!).
modules="wpa_supplicant"
wpa_supplicant_wlan0="-Drtl8192cu"
config_wlan0=("192.168.1.2/24" )
routes_wlan0=("default via 192.168.1.1" )
config_eth0=( "192.168.1.11/24" )
routes_eth0=( "default via 192.168.1.1" )
|
The only clue is : Unsupported driver rtl8192cu when I try to start the interface:
Code: |
localhost ~ # rc-update |grep net
local | default nonetwork
net.eth0 | default
net.lo | boot
netmount | default
localhost linux # ifconfig wlan0 down
localhost linux # ifconfig
eth0 Link encap:Ethernet HWaddr 00:06:5b:12:a4:89
inet addr:192.168.1.11 Bcast:192.168.1.255 Mask:255.255.255.0
inet6 addr: fe80::206:5bff:fe12:a489/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:1049 errors:0 dropped:1 overruns:0 frame:0
TX packets:784 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:120966 (118.1 KiB) TX bytes:154153 (150.5 KiB)
Interrupt:11 Base address:0xec00
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
localhost linux # /etc/init.d/net.wlan0 start
* Bringing up interface wlan0
* Starting wpa_supplicant on wlan0 ...
Unsupported driver 'rtl8192cu'.
* start-stop-daemon: failed to start `/usr/sbin/wpa_supplicant' [ !! ]
* ERROR: net.wlan0 failed to start
|
I sincerely would like to use the kernel module to access to the internet through the USB interface.
Have you any ideas how I could handle this "Unsupported driver" error ?
Should I use another driver ?
Please let me know if you need me to paste outputs.
Thank you.
Nicolas |
|
Back to top |
|
![](templates/gentoo/images/spacer.gif) |
NeddySeagoon Administrator
![Administrator Administrator](/images/ranks/rank-admin.gif)
![](images/avatars/3946266373f47d606a2db3.jpg)
Joined: 05 Jul 2003 Posts: 54524 Location: 56N 3W
|
Posted: Sat Jan 05, 2013 11:34 am Post subject: |
|
|
Nicolas_Y,
Code: | modules="wpa_supplicant"
wpa_supplicant_wlan0="-Drtl8192cu" |
Try -Dext in place of -Drtl8192cu
That driver does work _________________ Regards,
NeddySeagoon
Computer users fall into two groups:-
those that do backups
those that have never had a hard drive fail. |
|
Back to top |
|
![](templates/gentoo/images/spacer.gif) |
wcg Guru
![Guru Guru](/images/ranks/rank_rect_3.gif)
Joined: 06 Jan 2009 Posts: 588
|
Posted: Mon Jan 07, 2013 12:59 am Post subject: |
|
|
Is that a typo?
(The default wpa_supplicant driver is
which is a generic wpa_supplicant driver that works with multiple
different wireless chipsets if support for those chipsets is enabled
in the kernel. Works fine here with two different kernel wifi
hardware drivers, zd1211rw and rtl818x.) _________________ TIA |
|
Back to top |
|
![](templates/gentoo/images/spacer.gif) |
NeddySeagoon Administrator
![Administrator Administrator](/images/ranks/rank-admin.gif)
![](images/avatars/3946266373f47d606a2db3.jpg)
Joined: 05 Jul 2003 Posts: 54524 Location: 56N 3W
|
Posted: Mon Jan 07, 2013 6:30 pm Post subject: |
|
|
wcg,
Well caught - thanks. _________________ Regards,
NeddySeagoon
Computer users fall into two groups:-
those that do backups
those that have never had a hard drive fail. |
|
Back to top |
|
![](templates/gentoo/images/spacer.gif) |
Hal-10000 Tux's lil' helper
![Tux's lil' helper Tux's lil' helper](/images/ranks/rank_rect_1.gif)
![](images/avatars/98788058350f31e11d89fe.jpg)
Joined: 03 Jan 2013 Posts: 120
|
Posted: Sun Jan 13, 2013 8:44 pm Post subject: |
|
|
Hi, I'm new
My Belkin F7D2101 v1 wi-fi usb adapter (which works very well in Archlinux in the same notebook) do not works at all. I've tryed all the suggestions in this discussion and in this forum, but...noway! ifconfig does not see wlan0!
If you need to see some output, take a look here https://forums.gentoo.org/viewtopic-t-947570.html.
Excuse me if I'm posting here, but I need help, please.
Sorry for my bad english.
Thanks in advance. |
|
Back to top |
|
![](templates/gentoo/images/spacer.gif) |
NeddySeagoon Administrator
![Administrator Administrator](/images/ranks/rank-admin.gif)
![](images/avatars/3946266373f47d606a2db3.jpg)
Joined: 05 Jul 2003 Posts: 54524 Location: 56N 3W
|
Posted: Sun Jan 13, 2013 9:07 pm Post subject: |
|
|
Hal-10000,
You have different hardware to the one discussed here.
Code: | # lsusb
Bus 001 Device 002: ID 050d:2103 Belkin Components F7D2102 802.11n N300 Micro Wireless Adapter v3000 [Realtek RTL8192CU] |
This thread is for a device with Vendor and Device Ids ID 050d:2103.
Your device is a Code: | # lsusb
Bus 001 Device 002: ID 050d:845a Belkin Components F7D2101 802.11n Surf & Share Wireless Adapter v1000 [Realtek RTL8192SU] |
They may be the same on the packaging ... they may even share a driver too but you need to check that. You have a ID 050d:845a
You need the r8712u kernel module and probably linux-firmware. I'm using a netbook with a cut down Gentoo just now so I cannot easily check _________________ Regards,
NeddySeagoon
Computer users fall into two groups:-
those that do backups
those that have never had a hard drive fail. |
|
Back to top |
|
![](templates/gentoo/images/spacer.gif) |
Hal-10000 Tux's lil' helper
![Tux's lil' helper Tux's lil' helper](/images/ranks/rank_rect_1.gif)
![](images/avatars/98788058350f31e11d89fe.jpg)
Joined: 03 Jan 2013 Posts: 120
|
Posted: Sun Jan 13, 2013 9:55 pm Post subject: |
|
|
Neddy, Thank you for the replay.
You say that I need r8712u driver. This is the one I have in Archlinux and it works fine. But in Gentoo kernel I found only RTL8192CU, so I compiled that one as 'module' <M>. I'm not sure, but they seem to be the same thing, because the 'rtl8192cu' becomes 'r8712u' after unzipping.
I've also installed linux-firmware, but nothing to do!
I've tryed to emerge ndiswrapper, but I got a failure.
I really don't know what to do now, except to buy another usb wireless adapter....
Sorry for the double posts ![Embarassed :oops:](images/smiles/icon_redface.gif) |
|
Back to top |
|
![](templates/gentoo/images/spacer.gif) |
chithanh Developer
![Developer Developer](/images/ranks/rank-dev.gif)
![](images/avatars/3210501551dc02a09eeb8.png)
Joined: 05 Aug 2006 Posts: 2158 Location: Berlin, Germany
|
Posted: Mon Jan 14, 2013 12:14 pm Post subject: |
|
|
For modern drivers, wpa_supplicant_wlan0 should be set to "-Dnl80211" and not "-Dwext".
Also verify thatlists a driver for the device.
Do not use any driver that you downloaded from Realtek. To find out more why it does not work you can run
Code: | # ifconfig wlan0 up
# iw dev wlan0 scan | and watch console/dmesg for error messages. |
|
Back to top |
|
![](templates/gentoo/images/spacer.gif) |
NeddySeagoon Administrator
![Administrator Administrator](/images/ranks/rank-admin.gif)
![](images/avatars/3946266373f47d606a2db3.jpg)
Joined: 05 Jul 2003 Posts: 54524 Location: 56N 3W
|
Posted: Mon Jan 14, 2013 1:36 pm Post subject: |
|
|
Hal-10000,
Your driver is in the kernel, its under the help says
Code: | RealTek RTL8192U Wireless LAN NIC driver ────────────────┐
│ CONFIG_RTL8192U: │
│ │
│ │
│ Symbol: RTL8192U [=n] │
│ Type : tristate │
│ Prompt: RealTek RTL8192U Wireless LAN NIC driver │
│ Defined at drivers/staging/rtl8192u/Kconfig:1 │
│ Depends on: STAGING [=y] && PCI [=y] && WLAN [=y] && USB [=y] && \ │
│ m && <choice> │
│ Location: │
│ -> Device Drivers │
│ -> Staging drivers (STAGING [=y]) │
│ Selects: WIRELESS_EXT [=n] && WEXT_PRIV [=n] && CRYPTO [=y] |
Do not use random code from the web until you have tried the in kernel driver.
Remove ndiswrapper too as you are in danger of having two (or more) drivers for the same piece of hardware.
Its harmless to the hardware but it won't work as the mulitiple drivers try to control the hardware. _________________ Regards,
NeddySeagoon
Computer users fall into two groups:-
those that do backups
those that have never had a hard drive fail. |
|
Back to top |
|
![](templates/gentoo/images/spacer.gif) |
Hal-10000 Tux's lil' helper
![Tux's lil' helper Tux's lil' helper](/images/ranks/rank_rect_1.gif)
![](images/avatars/98788058350f31e11d89fe.jpg)
Joined: 03 Jan 2013 Posts: 120
|
Posted: Mon Jan 14, 2013 2:45 pm Post subject: |
|
|
chithanh wrote: | For modern drivers, wpa_supplicant_wlan0 should be set to "-Dnl80211" and not "-Dwext".
Also verify thatlists a driver for the device.
Do not use any driver that you downloaded from Realtek. To find out more why it does not work you can run
Code: | # ifconfig wlan0 up
# iw dev wlan0 scan | and watch console/dmesg for error messages. |
this is lsusb -t Code: | hal-10000 sciacuddi # lsusb -t
/: Bus 04.Port 1: Dev 1, Class=root_hub, Driver=uhci_hcd/2p, 12M
/: Bus 03.Port 1: Dev 1, Class=root_hub, Driver=uhci_hcd/2p, 12M
/: Bus 02.Port 1: Dev 1, Class=root_hub, Driver=uhci_hcd/2p, 12M
/: Bus 01.Port 1: Dev 1, Class=root_hub, Driver=ehci_hcd/6p, 480M
hal-10000 sciacuddi # |
this is ifconfig wlan0 up
Code: | hal-10000 sciacuddi # ifconfig wlan0 up
wlan0: ERROR while getting interface flags: Nessun device corrisponde
hal-10000 sciacuddi # |
in english: no device matches
this is iw dev wlan0 scan
Code: | hal-10000 sciacuddi # iw dev wlan0 scan
bash: iw: command not found |
|
|
Back to top |
|
![](templates/gentoo/images/spacer.gif) |
chithanh Developer
![Developer Developer](/images/ranks/rank-dev.gif)
![](images/avatars/3210501551dc02a09eeb8.png)
Joined: 05 Aug 2006 Posts: 2158 Location: Berlin, Germany
|
Posted: Mon Jan 14, 2013 2:48 pm Post subject: |
|
|
Code: | hal-10000 sciacuddi # lsusb -t
/: Bus 04.Port 1: Dev 1, Class=root_hub, Driver=uhci_hcd/2p, 12M
/: Bus 03.Port 1: Dev 1, Class=root_hub, Driver=uhci_hcd/2p, 12M
/: Bus 02.Port 1: Dev 1, Class=root_hub, Driver=uhci_hcd/2p, 12M
/: Bus 01.Port 1: Dev 1, Class=root_hub, Driver=ehci_hcd/6p, 480M
hal-10000 sciacuddi # | This means that the device is not connected.
Code: | hal-10000 sciacuddi # iw dev wlan0 scan
bash: iw: command not found | This means that you don't have emerged iw. |
|
Back to top |
|
![](templates/gentoo/images/spacer.gif) |
Hal-10000 Tux's lil' helper
![Tux's lil' helper Tux's lil' helper](/images/ranks/rank_rect_1.gif)
![](images/avatars/98788058350f31e11d89fe.jpg)
Joined: 03 Jan 2013 Posts: 120
|
Posted: Mon Jan 14, 2013 3:15 pm Post subject: |
|
|
it's very strange, the usb adapter is connected.... but Code: | hal-10000 sciacuddi # lsusb -t
/: Bus 04.Port 1: Dev 1, Class=root_hub, Driver=uhci_hcd/2p, 12M
/: Bus 03.Port 1: Dev 1, Class=root_hub, Driver=uhci_hcd/2p, 12M
/: Bus 02.Port 1: Dev 1, Class=root_hub, Driver=uhci_hcd/2p, 12M
/: Bus 01.Port 1: Dev 1, Class=root_hub, Driver=ehci_hcd/6p, 480M
|
I don't know why, because Code: | hal-10000 sciacuddi # lsusb
Bus 001 Device 003: ID 050d:845a Belkin Components F7D2101 802.11n Surf & Share Wireless Adapter v1000 [Realtek RTL8192SU]
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
| if the device was not connect, I do not have that output in lsusb, don't you think so?
then I emerged iw and Code: | hal-10000 sciacuddi # iw dev wlan0 scan
command failed: No such device (-19)
|
[/quote] |
|
Back to top |
|
![](templates/gentoo/images/spacer.gif) |
chithanh Developer
![Developer Developer](/images/ranks/rank-dev.gif)
![](images/avatars/3210501551dc02a09eeb8.png)
Joined: 05 Aug 2006 Posts: 2158 Location: Berlin, Germany
|
Posted: Mon Jan 14, 2013 3:18 pm Post subject: |
|
|
Code: | localhost linux # ifconfig -a
...
wlan0 Link encap:Ethernet HWaddr ec:1a:59:0e:e9:5a | and Code: | hal-10000 sciacuddi # iw dev wlan0 scan
command failed: No such device (-19) | does not match up. Something appears to have changed with kernel or hardware between your first post and now. |
|
Back to top |
|
![](templates/gentoo/images/spacer.gif) |
Hal-10000 Tux's lil' helper
![Tux's lil' helper Tux's lil' helper](/images/ranks/rank_rect_1.gif)
![](images/avatars/98788058350f31e11d89fe.jpg)
Joined: 03 Jan 2013 Posts: 120
|
Posted: Mon Jan 14, 2013 3:25 pm Post subject: |
|
|
sry, I'm not "localhost". That guy is Nicolas_Y.
I am Hal-10000...another guy
the first post is not mine |
|
Back to top |
|
![](templates/gentoo/images/spacer.gif) |
chithanh Developer
![Developer Developer](/images/ranks/rank-dev.gif)
![](images/avatars/3210501551dc02a09eeb8.png)
Joined: 05 Aug 2006 Posts: 2158 Location: Berlin, Germany
|
Posted: Mon Jan 14, 2013 3:26 pm Post subject: |
|
|
Ah, ok. That's what you get when you hijack other people's threads instead of starting your own. ![Rolling Eyes :roll:](images/smiles/icon_rolleyes.gif) |
|
Back to top |
|
![](templates/gentoo/images/spacer.gif) |
Hal-10000 Tux's lil' helper
![Tux's lil' helper Tux's lil' helper](/images/ranks/rank_rect_1.gif)
![](images/avatars/98788058350f31e11d89fe.jpg)
Joined: 03 Jan 2013 Posts: 120
|
Posted: Mon Jan 14, 2013 3:44 pm Post subject: |
|
|
chithanh wrote: | Ah, ok. That's what you get when you hijack other people's threads instead of starting your own. ![Rolling Eyes :roll:](images/smiles/icon_rolleyes.gif) |
I'm sorry. I thought it was useless to start another thead for the same thing |
|
Back to top |
|
![](templates/gentoo/images/spacer.gif) |
Hal-10000 Tux's lil' helper
![Tux's lil' helper Tux's lil' helper](/images/ranks/rank_rect_1.gif)
![](images/avatars/98788058350f31e11d89fe.jpg)
Joined: 03 Jan 2013 Posts: 120
|
Posted: Mon Jan 14, 2013 3:53 pm Post subject: |
|
|
@NeddySeagoon
I was trying to do what you said.
I issue this command: Code: | # cd /usr/src/linux
make menuconfig |
and then in:
Driver devices --->
Staging drivers --->
I've set <M> at "RealTek RTL8192U Wireless LAN NIC driver"
Then I compiled the kernel, updated the Grub, rebooted.
But it did not work
(in plus now my touchpad does not work )
I have to notice that in menuconfig, there are other drivers/modules which I set before, such as:
Device drivers --->
Network device support --->
Wireless Lan --->
<M> Realtek RTL8192CE/RTL8188CE Wireless Network Adapter │ │
│ │ <M> Realtek RTL8192SE/RTL8191SE PCIe Wireless Network Adapter │ │
│ │ <M> Realtek RTL8192DE/RTL8188DE PCIe Wireless Network Adapter │ │
│ │ <M> Realtek RTL8192CU/RTL8188CU USB Wireless Network Adapter
I'm asking if I have to delete the <M> in the drivers above...or something else
Last edited by Hal-10000 on Mon Jan 14, 2013 3:54 pm; edited 1 time in total |
|
Back to top |
|
![](templates/gentoo/images/spacer.gif) |
chithanh Developer
![Developer Developer](/images/ranks/rank-dev.gif)
![](images/avatars/3210501551dc02a09eeb8.png)
Joined: 05 Aug 2006 Posts: 2158 Location: Berlin, Germany
|
Posted: Mon Jan 14, 2013 3:53 pm Post subject: |
|
|
As your "ifconfig -a" differs, you two obviously have different problems. So make a new thread. |
|
Back to top |
|
![](templates/gentoo/images/spacer.gif) |
Hal-10000 Tux's lil' helper
![Tux's lil' helper Tux's lil' helper](/images/ranks/rank_rect_1.gif)
![](images/avatars/98788058350f31e11d89fe.jpg)
Joined: 03 Jan 2013 Posts: 120
|
Posted: Mon Jan 14, 2013 3:55 pm Post subject: |
|
|
chithanh wrote: | As your "ifconfig -a" differs, you two obviously have different problems. So make a new thread. |
ok, sry again |
|
Back to top |
|
![](templates/gentoo/images/spacer.gif) |
|